Search Results

Search found 1370 results on 55 pages for 'nat gr'.

Page 36/55 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Virtual Box Pen Test Lab Set Up

  - by hairyjewbear

  So i'm trying to set up a pen test lab in virtual box on my windows 7 host. I have 3 guest OS's installed: 1.) BackTrack5 2.) Centos 5 Server/Snort (My Snortbox) 3.) Win XP (Unpatched) I have 3 Ethernet adapters created IP'S 192.168.191.1 192.168.127.1 192.168.56.1 My goal is to use BackTrack5 to nmap the Win XP guest and have the snort box sniff the network. I'm new to networking and virtualization and I need help setting up my virtual network to get this to work. What should I do? All help appreciated Centos: Adapter1: NAT Adapter2: Host-only Adapter3: Internal Network Backtrack: Adapter1: Internal Network XP: Adapter1: Internal Network Also take for granted I'm on a University Network with a ridiculous firewall so I need to stay all within the host

  Read the article

• Isolating VMware virtual machines from the network

  - by jetboy

  I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

  Read the article

• Virtualbox two networks slow

  - by Petr Marek

  I am running an Ubuntu server guest on Win 7 guest, and am running a webrick server (RoR dev). If I have just a host-only network, everything works fine and the browser response is instant. However, if I add a second network (NAT), so that the server can connect to the internet (for various updates etc.), the host-to-guest access gets really slow. I can't use the bridge connection. I am using the port 3000 (RoR Webrick server) and connecting to the guest via internet browser on this port (eg http://192.168.56.102:3000). Any idea, what could be causing this? If I ping the IP from host console, I get < 0ms. Here are the settings (relevant info is in english; Povoleno vše is Everything is allowed):

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by AndreaTrasatti

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• I am trying to zip files individually, but the file type is unknown

  - by Jason Mander

  I am trying to zip some files with an unknown file type individually. I am using the following code in a batch script to do that: @ECHO OFF FOR %%A IN (bestbuy*nat*component.cpi*) DO "C:\Program Files\7-Zip\7z.exe" a -mx9 -m0=lzma2:d256m "%%~nA.7z" "%%A" The code will compress files individually ONLY if the file has an extension. Unfortunately the files that I have don't have any extension. In the code I am trying to zip files by doing a pattern match, the files are getting compressed into ONE file (which I do not want, I want each file compressed individually). Why does this code create separate zip files when the files have an extension (for example if I add .txt to the end of the files) and when there is no extension the code creates one zipped file. Can anyone please help me with the code to compress files with unknown file type so that each file gets compressed individually Your help would be greatly appreciated. Jason

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• Wired and Wireless USB Network Adapter

  - by Evan M.

  Does anyone know if there are any USB network adapters out there that have both wired and wireless networking capability? Far-fetched, I know, but thought I'd ask. Background: Some of our users have locked down laptops that we also include unlocked virtual machines running on VMware Player. Sometimes the users have a need for network connectivity with their VMs where NAT and bridged networking from the host won't work. To supplement this, we want to supply them with adapters that they can use VMware USB pass through capabilities to provide appropriate connectivity. They will need both wired and wireless capability. Rather than carrying around 2 adapters, was hoping we could get a combination unit so that we can reduce it to 1. Thanks

  Read the article

• Watchguard firebox: public IP addresses behind firewall with as much usable IP addresses as possible

  - by martinezpt

  Our ISP assigned us 16 public IP addresses that we want to assign to hosts behind a Watchguard firebox x750e. The IP addresses are: x.x.x.176/28 of which x.x.x.177 is the gateway. The hosts will be running software that needs to be directly assigned the public IP address so 1:1 NAT is not an option. I found this document that gives examples on how to assign public IP addresses to hosts behind the firewall, using an optional interface: http://www.watchguard.com/help/configuration-examples/public_IP_behind_XTM_configuration_example_(en-US).pdf However, I can't implement scenario 1 as it won't allow me to use the same subnet on both interfaces. As for scenario 2, splitting the address range into 2 subnets will decrease the usable hosts on the optional interface to 5 (8 - network - broadcast - optional interface ip). I'm convinced that there must be a better way to address this problem and maximize the number of usable IP addresses but I'm not very familiar with this specific firewall. Are there any suggestions on how to keep the hosts behind the firewall with public IP addresses while maximizing the usable IP addresses? thanks

  Read the article

• Draytek Vigor 2820 static IP's

  - by dannymcc

  I have a Draytek Vigor 2820 router which is connected to our ADSL provider (British Telecom, BT). We currently have one static IP address which is accessible from anywhere outside of our network and points at a simple web server on port 80. We have just been given 5 more static IP addresses which I would like to point at five servers that have static IP's. As an example: Current static IP - 80.123.123.123 New Static IP's - 100.100.100.100-105 Server IP's - 192.168.1.129-133 I have confused myself completely between NAT addresses, static routes and WAN IP aliases. If anyone can give me a clear idea of what I need to do it would be greatly appreciated.

  Read the article

• VM can’t connect to outside in bridged mode

  - by Kamal

  Hi Guys, I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have. My virtual network editor shows that my ethernet adapter(the one my host uses) is used for bridging. It is connected. I don't understand how I can get an IP address from DHCP server. I can't ping any of the DNS servers in generated /etc/resolv.conf which are the same as that of my host

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• iptables prerouting to redirect source ip address on ethernet

  - by Kevin Campion

  I have 2 ip adresses on the Internet who redirect on the same machine. On this machine, one Debian runs on OpenVZ. I can set iptables rules to redirect all http request to the Debian. iptables prerouting -d ip_address_2 DNAT --to ip_address_local_1 +--------------+ | | | V | ip_address_local_1 I| +------+ +----------+ N|ip_address_1 | |-----|Debian1 VE|-- Apache's log T|-----------------|OpenVZ| +----------+ [client ip_address_1] E| | | | R|ip_address_2 | | | N|--------------+ | | E| +------+ T| Iptables' rules : iptables -t nat -A PREROUTING -p tcp -i eth0 -d ip_address_2 --dport 80 -j DNAT --to ip_address_local_1:80 iptables -A FORWARD -p tcp -i eth0 -o venet0 -d ip_address_local_1 --dport 80 -j ACCEPT iptables -A FORWARD -p tcp -i venet0 -o eth0 -s ip_address_local_1 --sport 80 -j ACCEPT When I go to webpage with "http://ip_address_2", I can see the good content but the ip address on access log file is ip_address_1, I would like to see my ISP's ip address. Any ideas?

  Read the article

• iptables openvpn forward selectively from eth to tun

  - by Bryan Hunt

  Simple for those who know, indecipherable for those who don't... I'm running openVPN on (hypothetical) 66.66.66.66, I want to FORWARD incoming traffic, arriving on interface eth0 to interface tun0. It would also be nice to filter - based on destination IP address. I'm doing the NAT later on, but like to lock down early wherever possible. So onto the main course... This works: #Enable forwarding from eth0 to tun0 iptables -A FORWARD -i eth0 -o tun+ -j ACCEPT But this doesn't pass any packets whatsoever: #Stricter version iptables -A FORWARD -i eth0 -o tun+ --dst 66.66.66.66 -j ACCEPT Am I being unacceptably foolish?

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• Gre Tunnel Cisco Linux traffic forwarding

  - by mezgani

  I setup a gre tunnel a cisco router and a Linux machine, the tunnel interface in the Linux box named pic. Well i have to forward traffic coming from cisco through the Linux box. the rules i've set in the Linux box is described as follow: echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -i pic -o ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i ppp0 -o pic -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE I see the traffic coming from tunnel and forwarded to internet but no reply from sent packet. May i miss something like a routing rule.

  Read the article

• logparser Message with error codes

  - by nsr81

  Hi All, Is there anyway to get complete error message using LogParser? When I run the following query: logparser -i:EVT -o:NAT "SELECT TimeGenerated,EventID,Message from System WHERE EventTypeName='Error event'" I get the following output: 2009-09-02 19:35:44 7000 The USB Mass Storage Driver service failed to start due to the following error: %%1058 The full "Message" in EventViewer is: Description: The USB Mass Storage Driver service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. How can I obtain complete message using logparser?

  Read the article

• Juniper Networks SRX240 as a office router?

  - by Jordan Mendelson

  We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

  Read the article

• Fedora12, XP and connection sharing via iptables

  - by Paul L

  Just a quick question ( I Hope ) To find out if what I'm trying is even possible. I am trying to share internet connection with Fedora12 as default gateway and XP machine hooked up via NIC using iptables commands as shown in Mark Sobell's book 'A Practical Guide To Fedora And Red Hat Enterprise Linux' These are the commands as placed in /etc/rc.local iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -j LOG iptables -t NAT -A POSTROUTING -o eth1 -j MASQUERADE I did flip the in and out parameters to match my NIC configuration ( as opposed to example from book ) but other than that followed example. One thing to note is that Sobell did not mention whether this should work with mix of Linux and XP. One other note ( maybe meaningless ) is that I do have samba working between the two machines. Thanks for any insights anyone might have. PL

  Read the article

• workstation 7 and host-only no connectivity

  - by Steff

  hello, I have a WinXP 32 host (IBM T400) with VWware workstation 7 (7.0.1 build-227600) and some guest OS (Win xp, NT, etc.) I can ping from the host to guest OS and vice versa, but... every other "protocols" do not work at all. No http from host to guest, no CIFS, nothing, nothing, nothing. Windows firewall is turned off, TCP/IP filer is turned off. i re-installed VMware workstation, then the networking started working again, but, after some reboots... it stopped again. Connectivity among guest OS... it works FINE. Can not understand... problems exist just between host and guest. Host-only or NAT... it is the same. Any suggestion?

  Read the article

• workstation 7 and host-only no connectivity

  - by Steff

  hello, I have a WinXP 32 host (IBM T400) with VWware workstation 7 (7.0.1 build-227600) and some guest OS (Win xp, NT, etc.) I can ping from the host to guest OS and vice versa, but... every other "protocols" do not work at all. No http from host to guest, no CIFS, nothing, nothing, nothing. Windows firewall is turned off, TCP/IP filer is turned off. i re-installed VMware workstation, then the networking started working again, but, after some reboots... it stopped again. Connectivity among guest OS... it works FINE. Can not understand... problems exist just between host and guest. Host-only or NAT... it is the same. Any suggestion?

  Read the article

• Problem with shared ssh keys

  - by warren

  Following the process I've used in other environments, I've tried setting-up shared keys between my Mac and my CentOS 4 webserver. I've seen the same problem with my older Ubuntu 7.10 workstation trying to connect via keys to the same webserver. I have tried both dsa and rsa keytypes (sshkeygen -t <type>). The sshd_config file on my webserver seems to be allowing key-based logins: RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys And my .ssh/authorized_keys has my dsa and rsa keys added. Where should I be looking for what to change next to make key-based logins "Just Work™"? Is it related to the line, #UseDNS yes and sshd is trying to do a reverse-lookup on my IP, but cannot because it's NAT'd?

  Read the article

• Best MTA setup for home or laptop computers - not server

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that connects to various different wifi networks? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to forward mail for "root" to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• VM can't connect to outside in bridged mode

  - by Kamal

  I am not able to ping any machine(not even the host) from Guest VM in bridged mode. But I got an IP which is on the same subnet as host. I can ping my guest VM from the host and can use ssh to connect to the guest. I am using Vmware workstation 6.5. Guest VM is a centos VM and host is windows xp. Every thing works fine in NAT mode. Any clues as to what could be happening. I tried disabling all the firewalls I have.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >