Search Results

Search found 7843 results on 314 pages for 'power over ethernet'.

Page 36/314 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• How can I tell if my UPS is functioning properly or not for my PC?

  - by prabha

  For the last two days, my Uninterruptable Power Supply (UPS) has failed to produce the actual back up. So, I charged it for 24hrs and again checked that when the power failed my PC was automatically shut down. But in the time of power no supply from ups bt .......is my ups is working properly or not else there is direct power. It will cause any harm to my pc. my questions are..... Is the UPS functioning properly or not? If not, then will it harm my pc? If it is functioning, will it regulate direct power to pc without any cause? Is my UPS battery not working? What should I do to make my UPS batteries last for at least a year? I am using FRONTECH UPS 600va (Warranty for both ups and battery is expired) I already changed the battery 8 months previously. Note from editor: Tried to make as much sense of this question as I could. I hope I didn't alter the meaning in any way.

  Read the article

• Which type of motherboard i should by and why?

  - by metal gear solid

  If budged is not matter. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor? Is the size of motherboard and number of Slots only difference between all form factors? Is there any difference related to performance of motherboard? Is bigger in Size (ATX) motherboard always better?

  Read the article

• Which type of Form factor (motherboard) i should buy and why?

  - by metal gear solid

  If budged is not a problem. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor, should i purchase PSU according to Form factor of motherboard? Is the size of motherboard and number of Slots only difference between all form factors? Is there any differences among form factors, related to performance of motherboard? Is bigger in Size (ATX) motherboard always better? Is it so smaller in Size motherboard will consume less power? What are pros and cons of each Form factor? What there are so many Form factor were created?

  Read the article

• Is it possible to change the voltage on a single port on an HP ProCurve 2910al POE switch and how?

  - by hjoelr

  I have a couple of HP ProCurve 2910al POE+ switches at my company that we are primarily using to power our VOIP phones that run on 48V DC. However, I have one wireless access point that I need to run off of POE, but it has to be 24V DC. I'm afraid to plug it into the POE ProCurve because I'm not sure if it will zap the device. I'm wondering if there is a way to make sure to change the voltage on a specific port to 24V instead of the (seemingly) default value of 48V. Thanks! Joel

  Read the article

• How do you make this Haskell power function tail recursive?

  - by Linda Cohen

  turboPower a 0 = 1 turboPower a b | even b = turboPower (a*a) (b `div` 2) | otherwise = a * turboPower a (b-1) THANKS!

  Read the article

• What do people mean when they say 'the power of C++'?

  - by Bubba88

  I've heard many times that it is a 'flexible and very powerfull' language, but in what aspect could this be applied to C++?

  Read the article

• Full speed internal switch bandwidth but per-port set external bandwidth?

  - by garg

  I am in an environment where all the machines are behind a switch that I don't have access to. Each ethernet wall port has limited bandwidth depending on how much has been paid for each port. The problem is that some people have 10Mbps connections and some have 100Mbps connections and this causes problems with local intranet file transfers and operating system/software deployments. Operating systems can take hours to be deployed if the machine is on 10mbps. Do you know if it is possible with most switches to set a rule that would limit bandwidth coming in/going out to an extranet, but keep full bandwidth if the packets are destined to go to a local machine? For example, the internet might be limited to 10Mbps, but internal servers would get gigabit speeds? Thanks

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Upgraded from fc10 to fc12 now I have eth0_rename, how do I get back to plain old eth0?

  - by shank

  I upgraded from Fedora 10 to Fedora 12. Unfortunately, my ethernet interface eth0 is now named eth0_rename. I'd like to get back to having it named plain old eth0. I googled a bit but the solution of removing the eth0 entry from /etc/udev/rules.d/70-persistent-net.rules seems to have no effect (I restarted the network service but didn't reboot). The interface works just fine although I could see a script or two having a problem with the format. So, it's more of an inconvenience thing than anything else. Any ideas? Thanks.

  Read the article

• Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

  - by tog22

  I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

  Read the article

• Under what circumstances can/will a 10BASE-T device slow down a 100BASE-T or faster network?

  - by Fred Hamilton

  Suppose I have a 10BASE-T device, but everything else on my network is 100BASE-T or faster. When I attach the 10Mbit device, one of two things could happen: It could be passed through as 10BASE-T, making whatever it's connected to slow down to 10BASE-T, or It could be converted to a higher speed. I'm looking for all the plausible examples where #1 could happen; where attaching this 10Mbit device will slow down other traffic. I sorta think it can't happen - that as soon as it comes into contact with other traffic it has to get retimed to be inserted into the higher rate traffic (so no slowdown aside from the extra bits from the connection), and that when it's not contacting other traffic, who cares if it's only 10Mbit? Basically I'd like a better understanding of any impact of inserting a slow device into a fast ethernet network.

  Read the article

• How to create a separated network to customers only?

  - by Valter Henrique

  I work in a company where we have a network ethernet and wi-fi, we would like to create a network where our customers could access our network but don't have access to our computer network. This access would be internet only, nothing more. The customers will not see our computers and the files that we share in our network. I have two routers, how can I do this ? A Cisco Linksys Wireless-N Broadband Router WRT160N V3 and a Netgear Wireless G Router WGR614 v9 and about firewalls there´s only windows firewalls in each computer by default.

  Read the article

• Is there a performance difference between Cat5 and Cat6 keystone blocks?

  - by Scott Anderson

  I'm going to be wiring my home for ethernet soon, and I've already decided that I want to use Cat6 cable to do it (faster speeds, better performance, etc). During the installation, I'd like to add wall-plates to certain rooms in my house, and the keystone blocks look like the best option for me. My question is: I've seen different keystone blocks on many cabling websites, some say Cat5e and some say Cat6. The Cat6 ones are slightly more expensive. Is there any noticeable performance gain from using a Cat6 keystone? To me, it just seems like the keystone really wouldn't matter, since it's basically like putting an RJ-45 end on a cable. Can I buy the cheaper Cat5e keystone blocks and still have the performance that Cat6 cable will give me? Thanks!

  Read the article

• Why is the network speed on my Mac Pro (early 2009) so slow?

  - by Rafael

  I have a really weird networking issue on my Mac Pro (Early 2009). I can’t get higher network speeds than about 2MBit/s. It doesn’t matter if this is over AirPort or one of the Ethernet ports. An iMac and a Mac mini in the same network with almost the same configuration get about 25-30 MBit/s. I’ve read a couple of things about this on the official Apple forums, but there is no helpful information. Anyone else with Mac Pro network speed issues and who knows how to solve them?

  Read the article

• LAN cable not connected, but it is

  - by Koen

  I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Sending a file to uCLinux

  - by Mike

  I have a board running uClinux, and I need to send a file to it, but I'm not sure how... I have a RS232 port, and Ethernet port with an IP address at my disposal, I can telnet to the board, but uCLinux doesn't have a built in FTP client. What sort of options do I have here for transferring files from my Windows 7 (or OpenSUSE) machine(s) to this board? EDIT I just found I have a TFTP server on it: # tftp BusyBox v0.60.5 (2012.07.09-14:05+0000) multi-call binary Usage: tftp [OPTION]... HOST [PORT] But I can't find any good information on how to use TFTP. And looking around google I'm seeing it's good for loading binary images, so I'm assume anything could be sent, but I'm not sure.

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Squid3 not working. Access denied

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• Squid3 not working. Access denied.

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• Wired and Wireless Network Duplication

  - by Dave

  Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

  Read the article

• Why does Ubuntu (and other ubuntu based distros like lubuntu and linux mint) randomly shutdown on my laptop?

  - by Imran

  I have a lenovo g555 laptop and whenever I try and boot a ubuntu based distro off a usb, it randomly shuts off my PC (Not like a normal shutdown with shutdown loading screen but a like a sudden hard power off). This problem occurs even if I have installed the distro on my harddrive. In the past I've been able to use the distro for 10 min or so before it would it would do this. Now with the latest distros, It randomly pwers off even before it has fully booted up. My hardware specs are on this website.

  Read the article

• FrankenUPS Hack Turns a Server UPS into a Whole House UPS

  - by Jason Fitzpatrick

  This well documented build guide showcases the process of turning a rack-mounted UPS battery device intended for a server bank, into a super-charged whole-house UPS system with a massive 14 hours of backup juice. It’s a very ambitious build and, due to the work required in the main circuit breaker of your home, we highly recommend only those experienced with electrical work undertake the project. That said, it’s a really clever bit of recycling that yielded an impressive half-day worth of backup power. Hit up the link below for the detailed build log. FrankenUPS [via Hack A Day] The Best Free Portable Apps for Your Flash Drive Toolkit How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC

  Read the article

• Jupiter in Ubuntu 13.10 (Laptop Overheating)

  - by Daniel Pacheco

  I was wondering if Jupiter (Interface for display, power and device control) will work in Ubuntu 13.10, because my laptop (Toshiba Satellite C855D, AMD A6-4400M with Radeon HD Graphics running Ubuntu 13.04 x64) keeps overheating, I tried some other tools, like laptop-mode-tools or TLP, none of those work, not at all. Jupiter was the only option and it's supposedly discontinued, the version I'm using is being maintained by JoliCloud team, but they told me they're not sure if it will work with 13.10... If it doesn't work, I'm definitely not upgrading, since overheating is a major issue for me... Thanks in advance!

  Read the article

• How do you limit root partition disk access to allow drive to go into stanby mode?

  - by Casey

  When there are no users on my system, I would like the hard disk to spindown to low-power state. I realize that this might not be 100% achievable for a straight 24 hours, but it seems reasonable that the system could remain idle for a few hours at a time when it is not in use. My system is headless and running a limited number of services. The primary services are: exim4, mythtv-backend, nfs, samba, cups, apt-cacher-ng Assume that drives are already enabled to go into standby mode. Also, its not acceptable to increase the write-back timeout, since my system is not on a UPS.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >