Search Results

Search found 15661 results on 627 pages for 'protected mode'.

Page 36/627 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Does Windows 7 RC handle non Windows Media Center remotes yet?

    - by zillion
    I'm mostly a Linux geek, but while I will be trying to make my first Arch Linux installation in a virtual machine to learn and make my installation script for the true install, I need a simple OS and Windows 7 was better than Windows XP Media Center cause Media Center is outdated on XP. I tested it has a beta but my Hauppauge wintv-pvr usb2 remote wasn't working but the tv-tuner worked well and I haven't tested Windows XP Mode and my printer Epson Stylus Photo R300. Do someone know this hardware and if the XP Mode is easily supported?

    Read the article

  • External USB disk drive cannot be remounted in Windows XP

    - by jackhab
    I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

    Read the article

  • Integration features enabled but drives not available

    - by dsjbirch
    Frustratingly, after a recent update to Windows XP mode integration features, the availability of shared disks from the hosts has been impaired. Does anyone know any kind of workaround or fix (excluding dropbox et al)? I have tried completely uninstalling and reinstalling as per http://www.sevenforums.com/virtualization/63710-refreshing-xp-mode.html#post568715 At one point restarting the machine appeared to have worked, but today again I am without access to my host. Interestingly audio and copy and paste to and from the machine are working.

    Read the article

  • multi thread apps crashes in release mode

    - by etzarfat
    Hello, I'm using Visual Studio 2008 (programming in c). I've a weird problem I worte a program that has 2 threads that runs simultaneously, a recording thread (using audio card to record into memory) and a translation thread (using a speech engine to recognize the words). when I run my program in debug mode (aka setting a breakpoint in the code) it runs great, however when I run in debug mode or release mode (outside the visual studio enviroment) it crashes and give me the following exception: "Unhandled exception at 0x7c911129 in LowLevel.exe: 0xC0000005: Access violation reading location 0x014c7245." My stack looks: LowLevel.exe!__set_flsgetvalue() Line 256 + 0xc bytes C LowLevel.exe!_isleadbyte_l(int c=4359676, localeinfo_struct * plocinfo=0x00000001) Line 57 C++ 014b00d8() LowLevel.exe!PlayDateOfExam(int option=1) Line 2240 + 0x7 bytes C++ LowLevel.exe!NSCThread(void * arg=0x00000000) Line 1585 + 0xb bytes C++ kernel32.dll!7c80b729() winmm.dll!76b5b294() I uses the following file in my project "nsc.lib" and WinMM.lib" I'm not really familiar with threads I used a sample (which works great) and built on it. I saw a similiar question year on the forum but I didn't really understand the answers since I'm not familiar with with threads. Can someone help me? Thanks

    Read the article

  • Adding a Layout to bottom of the screen inside a ScrollView in Landscape mode

    - by andreea
    I have the following layout which works in Portrait mode: the Layout with the id LinearLayout02 is placed at the bottom of the screen. The problem appears when flipping to Lanscape mode, when the #LinearLayout02 is placed at the top of the screen. The question is how do I position #LinearLayout02 at the bottom of the screen in both Portrait and Landscape mode? (This happens on G1 and Xperia) Thank you The following code is placed inside a ScrollView android:layout_height="fill_parent" android:layout_width="fill_parent" android:fillViewport="true" <LinearLayout android:id="@+id/sLayout" android:layout_height="wrap_content" android:layout_width="fill_parent" android:orientation="vertical" android:paddingTop="2dip" android:layout_alignParentTop="true" android:gravity="top" > ..... </LinearLayout> <LinearLayout android:id="@+id/LinearLayout02" android:background="@drawable/bottombar_bg" android:layout_width="fill_parent" android:paddingTop="10dip" android:layout_height="56dip" android:layout_alignParentBottom="true" android:gravity="bottom" > <Button android:id="@+id/navigate" style="@style/mainBottomTabsButtonNormal" android:drawableLeft="@drawable/icon_navigation" android:text="@string/navigationSettings" android:layout_gravity="left"> </Button> <Button android:id="@+id/search" style="@style/mainBottomTabsButtonActive" android:drawableLeft="@drawable/icon_search" android:text="@string/search.label" android:layout_gravity="right"> </Button> </LinearLayout> </RelativeLayout>

    Read the article

  • UINavigationController navigation stack problems in Landscape Mode

    - by David F
    I have a iPhone application that I am currently converting to a Universal Binary to work with the iPad. I have successfully implemented everything I need in terms of layout so that full landscape functionality is now supported in my app (previously I primarily used portrait mode to display content). But, I have one strange problem, and it ONLY occurs in landscape mode: when I push a view controller onto the stack, it takes two taps on the back button to return to the previous view controller!!! The first tap shows a blank view, but with the same name on the left-side back navigation button, the second tap takes the controller back to previous view like it should. I don't have an iPad to test, so I am relying on the simulator. The problem does not show up on the iPhone and doesn't show up if you rotate back to portrait mode. My app consists of a tabbarcontroller with navigation controllers loaded for its vc's: //application delegate - (void)applicationDidFinishLaunching:(UIApplication *)application //.... WebHelpViewController *vc8 = [[WebHelpViewController alloc] init]; UINavigationController *nv8 = [[UINavigationController alloc] initWithRootViewController:vc8]; [self.tabBarController setViewControllers:[NSArray arrayWithObjects:nv1,nv2,nv3,nv4,nv5,nv6,nv7,nv8,nil]]; To implement landscape capability, the UITabBarController is overridden to autorotate when required: //CustomTabBarController.m - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return [[(UINavigationController *)self.selectedViewController topViewController] shouldAutorotateToInterfaceOrientation:interfaceOrientation]; } ... works fine. I navigate into new views using this method SomeViewController *vc = [[SomeViewController alloc] init]; [self.navigationController pushViewController:vc animated:YES]; [vc release]; Has anyone encountered this problem, and do they know if it's only a simulation error?

    Read the article

  • problems with Console.SetOut in Release Mode?

    - by Matt Jacobsen
    i have a bunch of Console.WriteLines in my code that I can observe at runtime. I communicate with a native library that I also wrote. I'd like to stick some printf's in the native library and observe them too. I don't see them at runtime however. I've created a convoluted hello world app to demonstrate my problem. When the app runs, I can debug into the native library and see that the hello world is called. The output never lands in the textwriter though. Note that if the same code is run as a console app then everything works fine. C#: [DllImport("native.dll")] static extern void Test(); StreamWriter writer; public Form1() { InitializeComponent(); writer = new StreamWriter(@"c:\output.txt"); writer.AutoFlush = true; System.Console.SetOut(writer); } private void button1_Click(object sender, EventArgs e) { Test(); } and the native part: __declspec(dllexport) void Test() { printf("Hello World"); } Update: hamishmcn below started talking about debug/release builds. I removed the native call in the above button1_click method and just replaced it with a standard Console.WriteLine .net call. When I compiled and ran this in debug mode the messages were redirected to the output file. When I switched to release mode however the calls weren't redirected. Console redirection only seems to work in debug mode. How do I get around this?

    Read the article

  • Ruby on Rails App not starting in production mode

    - by Ermin
    Everything works fine in development mode, but when I try to start my app in production mode (RAILS_ENV=production script/server) I get the following error: /opt/ruby1.8/lib/ruby/gems/1.8/gems/searchlogic-2.4.19/lib/searchlogic/named_scopes/conditions.rb:81:in `method_missing': protected method `scope' called for #<Class:0x7f41de524410> (NoMethodError) from /opt/ruby1.8/lib/ruby/gems/1.8/gems/searchlogic-2.4.19/lib/searchlogic/named_scopes/association_conditions.rb:19:in `method_missing' from /opt/ruby1.8/lib/ruby/gems/1.8/gems/searchlogic-2.4.19/lib/searchlogic/named_scopes/association_ordering.rb:27:in `method_missing' from /opt/ruby1.8/lib/ruby/gems/1.8/gems/searchlogic-2.4.19/lib/searchlogic/named_scopes/ordering.rb:30:in `method_missing' from /opt/ruby1.8/lib/ruby/gems/1.8/gems/searchlogic-2.4.19/lib/searchlogic/named_scopes/or_conditions.rb:28:in `method_missing' from /opt/ruby1.8/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:1959:in `method_missing_without_paginate' from /opt/ruby1.8/lib/ruby/gems/1.8/gems/will_paginate-2.3.12/lib/will_paginate/finder.rb:170:in `method_missing' from /opt/ruby1.8/lib/ruby/gems/1.8/gems/acts_as_commentable-3.0.0/lib/comment_methods.rb:12:in `included' from .../app/models/comment.rb:2:in `include' from .../app/models/comment.rb:2 from /opt/ruby1.8/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /opt/ruby1.8/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require'... Now it seems to me it that the acts_as_commentable gem is causing this. But how come, it works fine in development mode.

    Read the article

  • Setting White balance and Exposure mode for iphone camera + enum default

    - by Spectravideo328
    I am using the back camera of an iphone4 and doing the standard and lengthy process of creating an AVCaptureSession and adding to it an AVCaptureDevice. Before attaching the AvCaptureDeviceInput of that camera to the session, I am testing my understanding of white balance and exposure, so I am trying this: [self.theCaptureDevice lockForConfiguration:nil]; [self.theCaptureDevice setWhiteBalanceMode:AVCaptureWhiteBalanceModeLocked]; [self.theCaptureDevice setExposureMode:AVCaptureExposureModeContinuousAutoExposure]; [self.theCaptureDevice unlockForConfiguration]; 1- Given that the various options for white balance mode are in an enum, I would have thought that the default is always zero since the enum Typedef variable was never assigned a value. I am finding out, if I breakpoint and po the values in the debugger, that the default white balance mode is actually set to 2. Unfortunately, the header files of AVCaptureDevice does not say what the default are for the different camera setting. 2- This might sound silly, but can I assume that once I stop the app, that all settings for whitebalance, exposure mode, will go back to their default. So that if I start another app right after, the camera device is not somehow stuck on those "hardware settings".

    Read the article

  • Problem when use compiled .A with simulator mode

    - by Paska
    Hi all, i have a lib .a that run only in device mode. My sdk vers is 4.2 with xcode 3.2.x. In simulator, compile correctle with no warning and no errors, but in run mode (simulator) it crash with this error: Detected an attempt to call a symbol in system libraries that is not present on the iPhone: strtod$UNIX2003 called from function pj_init in image MyAPP. If you are encountering this problem running a simulator binary within gdb, make sure you 'set start-with-shell off' first Program received signal: “SIGABRT”. I try to clean, rebuild and set "set start-with-shell off" from terminal in this way: cd ~ echo '' >> .gdbinit echo 'set start-with-shell 0' >> .gdbinit Restarted all, but nothing. The problem don't wont to resolve! Is there any tag or property that i forgotted to set in the options? In other linker flag is there only "-ObjC". It's very important to solve this issue... any idea please? thanks, A EDIT: It's my lib, compiled in simulator mode! EDIT: It run only with Simulator 4.1. Don't work with iphone 4.0, 4.2 and ipad 3.2 (all simulator).

    Read the article

  • Kernel Mode Rootkit

    - by Pajarito
    On the other 3 computers in my family, I believe that we have a kernel-mode rootkit for windows. It appears that the same rootkit is on all of them. We think. We changed all the important passwords from my computer, running linux right now. On all of the infected computers is Symantic Endpoint Protection, because it's free from the university where my mom and dad work. In my opinion symantec is a piece of crap, seeing as it didn't even manager to delete the tracking cookies it found when I tried it on my own computer. The Computers and their set-ups: Computer A: Vista Business; symantec antivirus. runs it as admin, no password. IE8. no other security software other than what comes with windows. IE8 security settings the default Computer B: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, spybot, uses IE8 with default settings, sometimes Firefox Computer C: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, uses IE8 with default settings, no other security programs except what came with windows This is what's happening. Cut and pasted from my dad's forum post. -- When I scanned my laptop (Dell XPS M1330 with Windows Vista Small Business), Symantec Endpoint Protection hangs for a while, perhaps 10 seconds or so, on some of the following files 9129837.exe, hide_evr2.sys, VirusRemoval.vbs, NewVirusRemoval.vbs, dll.dll, alsmt.ext, and _epnt.sys. It does this if a run a scan that I set up to run on a new thumbnail drive and it does this even if the thumbnail is not plugged in. It doesn't seem to do this if I scan only the C: drive. I've check for problems with symantec endpoint protection and also with Microsoft Security Essentials and Malwarebytes Anti-Malware. They found nothing and I can't find anything by searching for hidden files. Next I tried microsoft's rootkitrevealer. It (rootkitrevealer) finds 279660 (or so) discrepancies and the interface is so glitchy after that I can't really figure out what is going on. The screen is squirrely. The rootkitrevealer pulls up many files in the folder \programdata\applicationdata and there are numberous appended \applicationdata on the end of that as well. -- As you can see, what we did was install MSE and MBAM and scan with both of them. Nothing but a tracking cookie. Then I took over and ran rootkitrevealer.exe from MicroSoft from a flash drive. It found a bunch of discrepancies, but only about 20 or so where security related, the rest being files that you just couldn't see from Windows Explorer. I couldn't see whether of not the files list above, the ones that the scan was hanging on, where in the list. The other thing is, I have no idea what to do about the things the scan comes up with. Then we checked the other computers and they do the same thing when you scan with Symantec. The people at the university seen to think that dad might not have a virus, but 2 of the computers slowed down noticably AND IE8 started acting all funny. None of my family is very computer oriented, and 2 of the possible causes for the rootkit are: -My dad bought a new flash drive, which shipped with a data security executable on it -My dad has to download lots of articles for his work Those are the only things that stand out, but it could have been anything. We are currently backing up our data, and I'll post again after trying IceSword 1.22. I just looked at my dad's forum topic, and someone recommended GMER. I'll try that too.

    Read the article

  • OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

    - by michael
    I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

    Read the article

  • How can I prevent an app from leaving full screen mode when I move the cursor to another display?

    - by dan
    When I have dual displays set up, or when I am using Synergy to use one keyboard and mouse across two computers/screens, I can't seem to retain F11 full screen mode for the top application when I mouse out of that screen. This applies to both the application and also to any Flash video that may be playing in full screen mode. Is there any way to retain full screen mode and mouse out of the display?

    Read the article

  • Ubuntu won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • cannot mount root filesystem on 10.04

    - by howaryoo
    I tried to apply the recommendation of question: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) After running that command: sudo mount --bind /dev /mnt/dev I get this error message: mount: mount point /mnt/dev does not exist fdisk -l returns /dev/sda1 /dev/sda2 /dev/sda5 do I need to mount sda2 and sda5? Edited after @psusi's comment: /dev/sda1 is the boot file system It seems that I need to mount sda2 or sda5. Here is what I tried: (I tried this on a virtual machine so the sda(s) are now vda(s) ) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008eece Device Boot Start End Blocks Id System /dev/vda1 * 3 496 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/vda2 498 37448 18622465 5 Extended Partition 2 does not end on cylinder boundary. /dev/vda5 498 37448 18622464 8e Linux LVM ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo mount -t ext4 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ sudo mount -t ext2 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ Any info that can help me rescue that server would be greatly appreciated!

    Read the article

  • Ubuntu Linux won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • Change administrator username

    - by Fazlan
    I have accidentally typed my name wrong when I created the administrator account. Although I managed to change the user name at the login screen, I am unable to rename the /home/oldusername to /home/newusername. I tried most of the online tutorials, and it failed. The code I tried was this: usermod -l newusername -m -d /home/newusername oldusername But the output is: cannot lock /etc/passwd; try again later. How can I fix the issue and change the folder to newusername and expect all the applications to work as before?

    Read the article

  • How to fix "The system is running in low-graphics mode" error?

    - by jokerdino
    Note: This is an attempt to create a canonical question that covers all instances of "low-graphics mode" error that occurs to a user, including but not limited to installation of wrong drivers, incorrect or invalid lightdm greeters, low disk space, incorrect installation of graphics card like ATI and Nvidia, incorrect configuration of xorg.conf file while setting up multiple monitors among others. If you are experiencing the "low-graphics mode" error when trying to login but none of the following answers work for you, please do ask a new question and then update the answers of this canonical question as and when your new question gets answered. When I try to boot into my computer, I am getting this error: The system is running in low-graphics mode Your screen, graphics cards, and input device settings could not be detected correctly. You will need to configure these yourself. How do I fix the failsafe X mode and login into my computer? Answer index: The greeter is invalid

    Read the article

  • No internet - please help?

    - by All
    I just got Ubuntu and I am really really really a linux novice. I can't get the wireless to work? I played around with it until I saw it says "wireless firmware missing" - Hardware address 00:14:A5:6A:17:C2. On my laptop there is a button that looks like a little antenae that means the wireless is on. The funny thing is that this button does not seem to do anything right now - the light is not lit up and does not light up. Any thoughts you have on getting this going are appreciated!

    Read the article

  • How do I turn off nVidia high performance mode?

    - by gpen06
    I am new to Ubuntu 11.10 and never touched linux until today. I installed Ubuntu alongside with Windows 7. I have an issue with my laptop overheating and freezing when it uses the high performance GPU graphics mode (hybrid card). It is an easy fix for Windows 7. I simply set the graphics mode manually to the low performance integrated graphics (save power) mode using advanced power settings. In Ubuntu, I'm stumped at how to do this. When using Ubuntu, my laptop is showing the same symptoms as it did without the fix for Windows. I have the nVidia graphics driver installed for Windows which allows me to see which mode I am in. I downloaded it off of my laptop's website (ASUS). They do not offer driver downloads for linux. Screenshot of power settings in Windows 7

    Read the article

  • openvpn: after changing to server mode, client does not create TUN device

    - by lurscher
    i had a previously working configuration with the config files used in a previous question However, i've changed this now to the following configuration using server mode, everything on the logs seem fine, however the client doesn't create any tun interface, so i don't have anything to connect to, presumably, i need to add or push some route commands, but i don't have any idea at this point what i need to do. I am posting all my relevant configuration files server.conf: dev tun server 10.8.117.0 255.255.255.0 ifconfig-pool-persist ipp.txt tls-server dh /home/lurscher/keys/dh1024.pem ca /home/lurscher/keys/ca.crt cert /home/lurscher/keys/vpnCh8TestServer.crt key /home/lurscher/keys/vpnCh8TestServer.key status openvpn-status.log log openvpn.log comp-lzo verb 3 and client.conf: dev tun remote my.server.com tls-client ca /home/chuckq/keys/ca.crt cert /home/chuckq/keys/vpnCh8TestClient.crt key /home/chuckq/keys/vpnCh8TestClient.key ns-cert-type server ; port 1194 ; user nobody ; group nogroup status openvpn-status.log log openvpn.log comp-lzo verb 3 the server ifconfig shows a tun device: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.117.1 P-t-P:10.8.117.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) However the client ifconfig does not show any tun interface! $ ifconfig tun0 tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) the client log says: Tue May 17 23:27:09 2011 OpenVPN 2.1.0 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:27:09 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:27:09 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:27:09 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:27:09 2011 LZO compression initialized Tue May 17 23:27:09 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:09 2011 TUN/TAP device tun0 opened Tue May 17 23:27:09 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:27:09 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:09 2011 Local Options hash (VER=V4): '41690919' Tue May 17 23:27:09 2011 Expected Remote Options hash (VER=V4): '530fdded' Tue May 17 23:27:09 2011 Socket Buffers: R=[114688->131072] S=[114688->131072] Tue May 17 23:27:09 2011 UDPv4 link local (bound): [undef] Tue May 17 23:27:09 2011 UDPv4 link remote: [AF_INET]192.168.0.101:1194 Tue May 17 23:27:09 2011 TLS: Initial packet from [AF_INET]192.168.0.101:1194, sid=8e8bdc33 f4275407 Tue May 17 23:27:09 2011 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:09 2011 VERIFY OK: nsCertType=SERVER Tue May 17 23:27:09 2011 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=vpnCh8TestServer/name=lurscher/[email protected] Tue May 17 23:27:09 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:09 2011 [vpnCh8TestServer] Peer Connection Initiated with [AF_INET]192.168.0.101:1194 Tue May 17 23:27:10 2011 Initialization Sequence Completed the client status log: OpenVPN STATISTICS Updated,Tue May 17 23:30:09 2011 TUN/TAP read bytes,0 TUN/TAP write bytes,0 TCP/UDP read bytes,5604 TCP/UDP write bytes,4244 Auth read bytes,0 pre-compress bytes,0 post-compress bytes,0 pre-decompress bytes,0 post-decompress bytes,0 END and the server log says: Tue May 17 23:18:25 2011 OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:18:25 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:18:25 2011 WARNING: --keepalive option is missing from server config Tue May 17 23:18:25 2011 NOTE: your local LAN uses the extremely common subnet address 192.168.0.x or 192.168.1.x. Be aware that this might create routing conflicts if you connect to the VPN server from public locations such as internet cafes that use the same subnet. Tue May 17 23:18:25 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:18:25 2011 Diffie-Hellman initialized with 1024 bit key Tue May 17 23:18:25 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:18:25 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:18:25 2011 ROUTE default_gateway=192.168.0.1 Tue May 17 23:18:25 2011 TUN/TAP device tun0 opened Tue May 17 23:18:25 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:18:25 2011 /sbin/ifconfig tun0 10.8.117.1 pointopoint 10.8.117.2 mtu 1500 Tue May 17 23:18:25 2011 /sbin/route add -net 10.8.117.0 netmask 255.255.255.0 gw 10.8.117.2 Tue May 17 23:18:25 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:18:25 2011 Socket Buffers: R=[126976->131072] S=[126976->131072] Tue May 17 23:18:25 2011 UDPv4 link local (bound): [undef] Tue May 17 23:18:25 2011 UDPv4 link remote: [undef] Tue May 17 23:18:25 2011 MULTI: multi_init called, r=256 v=256 Tue May 17 23:18:25 2011 IFCONFIG POOL: base=10.8.117.4 size=62 Tue May 17 23:18:25 2011 IFCONFIG POOL LIST Tue May 17 23:18:25 2011 vpnCh8TestClient,10.8.117.4 Tue May 17 23:18:25 2011 Initialization Sequence Completed Tue May 17 23:27:22 2011 MULTI: multi_create_instance called Tue May 17 23:27:22 2011 192.168.0.104:1194 Re-using SSL/TLS context Tue May 17 23:27:22 2011 192.168.0.104:1194 LZO compression initialized Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Local Options hash (VER=V4): '530fdded' Tue May 17 23:27:22 2011 192.168.0.104:1194 Expected Remote Options hash (VER=V4): '41690919' Tue May 17 23:27:22 2011 192.168.0.104:1194 TLS: Initial packet from [AF_INET]192.168.0.104:1194, sid=8972b565 79323f68 Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:22 2011 192.168.0.104:1194 [vpnCh8TestClient] Peer Connection Initiated with [AF_INET]192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: Learn: 10.8.117.6 -> vpnCh8TestClient/192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: primary virtual IP for vpnCh8TestClient/192.168.0.104:1194: 10.8.117.6 finally, the server status log: OpenVPN CLIENT LIST Updated,Tue May 17 23:36:25 2011 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since vpnCh8TestClient,192.168.0.104:1194,4244,5604,Tue May 17 23:27:22 2011 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.117.6,vpnCh8TestClient,192.168.0.104:1194,Tue May 17 23:27:22 2011 GLOBAL STATS Max bcast/mcast queue length,0 END

    Read the article

  • datalist edit mode.

    - by Ranjana
    i have a datalist control <ItemTemplate> <tr> <td height="31px"> <asp:Label ID="lblStudentName" runat="server" Text="StudentName :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "StudentName") %> </td> <td height="31px"> <asp:LinkButton ID="lnkEdit" runat="server" CommandName="edit">Edit</asp:LinkButton> </td> </tr> <tr> <td> <asp:Label ID="lblAdmissionNo" runat="server" Text="AdmissionNo :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "AdmissionNo")%> </td> </tr> <tr> <td height="31px"> <asp:Label ID="lblStudentRollNo" runat="server" Text="StdentRollNo :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "StdentRollNo") %> </td> <td height="31px"> <asp:LinkButton ID="lnkEditroll" runat="server" CommandName="edit">Edit</asp:LinkButton> </td> </tr> </ItemTemplate> <EditItemTemplate> <tr> <td height="31px"> <asp:Label ID="lblStudentName" runat="server" Text="StudentName :" Font-Bold="true"></asp:Label> <asp:TextBox ID="txtProductName" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "StudentName") %>'></asp:TextBox> </td> <td> <asp:LinkButton ID="lnkUpdate" runat="server" CommandName="update">Update</asp:LinkButton> <asp:LinkButton ID="lnkCancel" runat="server" CommandName="cancel">Cancel</asp:LinkButton> </td> </tr> <tr> <td height="31px"> <asp:Label ID="lblAdmissionNo" runat="server" Text="AdmissionNo :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "AdmissionNo")%> </td> </tr> <tr> <td height="31px"> <asp:Label ID="lblStudentRollNo" runat="server" Text="StudentRollNo :" Font-Bold="true"></asp:Label> <asp:TextBox ID="txtStudentRollNo" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "StdentRollNo") %>'></asp:TextBox> </td> <td> <asp:LinkButton ID="LinkButton1" runat="server" CommandName="update">Update</asp:LinkButton> <asp:LinkButton ID="LinkButton2" runat="server" CommandName="cancel">Cancel</asp:LinkButton> </td> </tr> </EditItemTemplate> <FooterTemplate> </table> </FooterTemplate> </asp:DataList> code behind: protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { DataTable dt = new DataTable(); dt = obj.GetSamples(); DataList1.DataSource = dt; DataList1.DataBind(); } } public void DataBind() { DataTable dt = new DataTable(); dt = obj.GetSamples(); DataList1.DataSource = dt; DataList1.DataBind(); } protected void DataList1_EditCommand1(object source, DataListCommandEventArgs e) { DataList1.EditItemIndex = e.Item.ItemIndex; DataBind(); } protected void DataList1_CancelCommand1(object source, DataListCommandEventArgs e) { DataList1.EditItemIndex = -1; DataBind(); } protected void DataList1_UpdateCommand1(object source, DataListCommandEventArgs e) { // Get the DataKey value associated with current Item Index. // int AdmissionNo = Convert.ToInt32(DataList1.DataKeys[e.Item.ItemIndex]); string AdmissionNo = DataList1.DataKeys[e.Item.ItemIndex].ToString(); // Get updated value entered by user in textbox control for // ProductName field. TextBox txtProductName; txtProductName = (TextBox)e.Item.FindControl("txtProductName"); TextBox txtStudentRollNo; txtStudentRollNo = (TextBox)e.Item.FindControl("txtStudentRollNo"); // string variable to store the connection string // retrieved from the connectionStrings section of web.config string connectionString = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; // sql connection object SqlConnection mySqlConnection = new SqlConnection(connectionString); // sql command object initialized with update command text SqlCommand mySqlCommand = new SqlCommand("update SchoolAdmissionForm set StudentName=@studentname ,StdentRollNo=@studentroll where AdmissionNo=@admissionno", mySqlConnection); mySqlCommand.Parameters.Add("@studentname", SqlDbType.VarChar).Value = txtProductName.Text; mySqlCommand.Parameters.Add("@admissionno", SqlDbType.VarChar).Value = AdmissionNo; mySqlCommand.Parameters.Add("@studentroll", SqlDbType.VarChar).Value = txtStudentRollNo.Text; // check the connection state and open it accordingly. if (mySqlConnection.State == ConnectionState.Closed) mySqlConnection.Open(); // execute sql update query mySqlCommand.ExecuteNonQuery(); // check the connection state and close it accordingly. if (mySqlConnection.State == ConnectionState.Open) mySqlConnection.Close(); // reset the DataList mode back to its initial state DataList1.EditItemIndex = -1; DataBind(); // BindDataList(); } But it works fine.... but when i click edit command both the Fields 1.StudentName 2.StudentRollNo im getting textboxes to all the fields where i placed textbox when i click 'edit' command and not the particular field alone . but i should get oly the textbox visible to the field to which i clik as 'edit' , and the rest remain same without showing textboxes even though it is in editmode

    Read the article

  • Using telerik radGrid - how to set the Date format for autogenerated column in edit mode

    - by Mark Breen
    Hello All, Using VS2008, and Telerik radGrid version 2010.1.519.35 I have a about 50 DNN modules using telerik radgrid and I need to display my dates in dd/mm/yy format. It is possible to do this easily in view mode, but when I switch to edit mode, it is more of a struggle. I can write a snippit of code to reformat the displayed date values to dd/mm/yy, but for inserts the user must enter mm/dd/yy. IOW, I need to change the culture of the form to en-GB culture. In my DotnetNuke App, I have made a change to the web.config, but it still assumes en-US format. I am not sure whether I need to set this at web.config level, page level or at the column within the control. I am struggling with this for a month or more and any help would be appriciated, thanks Mark Breen Ireland BMW R80GS 1987

    Read the article

  • GWT Javascript Exception in Hosted Mode: Result of expression 'doc.getBoxObjectFor' [undefined] is

    - by holmes
    Anyone ever seen this exception? I'm running in hosted mode on GWT 1.6.4 on a mac. I'm using the AutoSuggest and it's throwing this exception trying to show the popup. It works fine in compiled mode, but obviously hosted mode is rather important. [ERROR] Uncaught exception escaped com.google.gwt.core.client.JavaScriptException: (TypeError): Result of expression 'doc.getBoxObjectFor' [undefined] is not a function. line: 71 sourceId: 1152617088 sourceURL: jar:file:/Users/holmes/.m2/repository/com/google/gwt/gwt-user/1.6.4/gwt-user-1.6.4.jar!/com/google/gwt/dom/client/DOMImplMozillaOld.java expressionBeginOffset: 288 expressionCaretOffset: 307 expressionEndOffset: 313 at com.google.gwt.dom.client.DOMImplMozillaOld.getAbsoluteLeftImpl(Native Method) at com.google.gwt.dom.client.DOMImplMozillaOld.getAbsoluteLeft(DOMImplMozillaOld.java:29) at com.google.gwt.dom.client.Element$.getAbsoluteLeft$(Element.java:86) at com.google.gwt.user.client.DOM.getAbsoluteLeft(DOM.java:646) at com.google.gwt.user.client.ui.UIObject.getAbsoluteLeft(UIObject.java:487) at com.google.gwt.user.client.ui.PopupPanel.position(PopupPanel.java:1015) at com.google.gwt.user.client.ui.PopupPanel.access$5(PopupPanel.java:958) at com.google.gwt.user.client.ui.PopupPanel$1.setPosition(PopupPanel.java:811) at com.google.gwt.user.client.ui.PopupPanel.setPopupPositionAndShow(PopupPanel.java:700) at com.google.gwt.user.client.ui.PopupPanel.showRelativeTo(PopupPanel.java:809) at com.google.gwt.user.client.ui.SuggestBox.showSuggestions(SuggestBox.java:768) at com.google.gwt.user.client.ui.SuggestBox.access$3(SuggestBox.java:738) at com.google.gwt.user.client.ui.SuggestBox$1.onSuggestionsReady(SuggestBox.java:281) at com.google.gwt.user.client.ui.MultiWordSuggestOracle.requestSuggestions(MultiWordSuggestOracle.java:225) at com.google.gwt.user.client.ui.SuggestBox.showSuggestions(SuggestBox.java:640) at com.google.gwt.user.client.ui.SuggestBox.refreshSuggestions(SuggestBox.java:713) at com.google.gwt.user.client.ui.SuggestBox.access$6(SuggestBox.java:705) at com.google.gwt.user.client.ui.SuggestBox$1TextBoxEvents.onKeyUp(SuggestBox.java:678) at com.google.gwt.event.dom.client.KeyUpEvent.dispatch(KeyUpEvent.java:54) at com.google.gwt.event.dom.client.KeyUpEvent.dispatch(KeyUpEvent.java:1) at com.google.gwt.event.shared.HandlerManager$HandlerRegistry.fireEvent(HandlerManager.java:65) at com.google.gwt.event.shared.HandlerManager$HandlerRegistry.access$1(HandlerManager.java:53) at com.google.gwt.event.shared.HandlerManager.fireEvent(HandlerManager.java:178) at com.google.gwt.user.client.ui.Widget.fireEvent(Widget.java:52) at com.google.gwt.event.dom.client.DomEvent.fireNativeEvent(DomEvent.java:116) at com.google.gwt.user.client.ui.Widget.onBrowserEvent(Widget.java:90) at com.google.gwt.user.client.ui.TextBoxBase.onBrowserEvent(TextBoxBase.java:193) at com.google.gwt.user.client.ui.Composite.onBrowserEvent(Composite.java:54) at com.google.gwt.user.client.DOM.dispatchEventImpl(DOM.java:1320) at com.google.gwt.user.client.DOM.dispatchEventAndCatch(DOM.java:1299) at com.google.gwt.user.client.DOM.dispatchEvent(DOM.java:1262)

    Read the article

  • jquery.autocomplete doesn't work in compability mode

    - by Oskar Kjellin
    I've read all the results I can find on SO about this without finding anything that applies to me, so don't judge me too quickly :) I am using jquery.autocomplete downloaded from here: http://www.dyve.net/jquery/?autocomplete together with http://ajax.microsoft.com/ajax/jquery/jquery-1.3.2.js This all works well in IE8 and FF, but as soon as I activate compability mode in IE8 I keep getting: Microsoft JScript runtime error: Object doesn't support this property or method When looking in the call stack, This is the one where it breaks: <script type="text/javascript"> $().ready(function() { $("#friendsearch").autocomplete("/Account/FindFriends"); }); </script> and then the calling function is this: if ( jQuery.readyList ) { // Execute all of them jQuery.each( jQuery.readyList, function(){ this.call( document, jQuery ); }); // Reset the list of functions jQuery.readyList = null; } where this line throws the error: this.call( document, jQuery ); Does anybody know why this happens? As mentioned above, works super in IE8 and firefox, but not in compability mode(IE7)

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >