Search Results

Search found 1584 results on 64 pages for 'punch cards'.

Page 36/64 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Home network with Windows 7 as router

  - by Michael

  Background: I have tried to use routers, but so far all of them can't handle the bandwidth, number of connections eventually limited by the hardware resources, so overall the home routers are decreasing the internet speed. I went through DD-WRT and stuff like that. Question: What I want is to use my Windows7 PC as router. It has 2 LAN cards. I'm going to connect to this router another desktop 2 pcs and notebook through wireless router. The main question is what is the most efficient way to turn this Windows7 box(and I need Windows for native NTFS support) into router with NAT/Routing/Firewall functionality? Is there any routing software recommended for this purpose or I should just use windows native "Internet Sharing"? I'm going to run SIP phones in the LAN, so I need friendly NAT(Full cone perhaps). Also I'm going to have FTP server on that Windows7 "server" PC. As firewall I'm thinking about Comodo. Need to drop all incoming, unless explicitly allowed.

  Read the article

• How can I tell which interface my Supemicro IPMI is piggybacking on?

  - by lorin

  I've used IPMI before, but only on servers where the IPMI interface had a dedicated ethernet port. I've got an Ubuntu 10.04 server with two ethernet cards, which is supposed to have an IPMI interface on it (the motherboard is a Supermicro H8DMR-I2). From what I understand, the IPMI interface is piggybacking on one of the two NICs. Is there any way I can tell which NIC the IPMI interface is piggybacking on? Using ipmitool I've tried to set the IP address on the IPMI interface for the subnet for eth0, and then the subnet for eth1, and it's never reachable. (Can you even reach an IPMI interface from the same NIC it's piggybacking off of, or do you need to try connecting from a different machine on the network?) Also, is there anything special I need to do to enable it? I can access the IPMI interface locally using "ipmitool".

  Read the article

• Address Label Printing without Windows Address Book

  - by Jim Fell

  In the past I've maintained my address book using the built-in Address Book utility that came with Windows. Once each year, I would import my Address Book (.WAB) file into Outlook 2003/XP. (I don't use Outlook for email.) Then I would use the Mail Merge feature in Word 2003/XP to make and print address labels on standard Avery label sheets to simplify address of my Christmas cards. Since I'm now using Windows 7, and the familiar Address Book utility is no longer available, how can I print my address labels? I have both Windows Address Book (.WAB) and Comma-Separated Values (.CSV) files that contain my address book data. So, I guess I need to know two things: Which program or utility (preferably free) can I use to print my address labels. How do I import my address data into that program? If it helps, I am already a user of Gmail and Google Drive. Thanks.

  Read the article

• vmware server end of life, where to go now?

  - by matnagel

  We have some virtual machines on vmware server 2.x running on 64 bit hardware and quite happy with it. As vmware server will no longer be offered we are thinking to migrate to ESXi, which seems is free. We will have to install the specialized network cards but that's a minor problem. But once left alone with a quite silently discontinued product there is some resistance to vmware. VirtualBox seems to work: http://blogs.oracle.com/virtualization/2010/06/migrating_from_vmware_to_virtu.html What other free (of licencing cost) options are there? We have windows server 2003 32 bit VMs and also linux 32 and 64 bit VMs to migrate. So xen does not seem an option, which does not run microsoft OSes.

  Read the article

• Can I use a mini PCI-E card in a standard motherboard with PCI/PCI Express slots?

  - by White Phoenix

  I'm helping someone build a computer and they absolutely insist on having an internal Bluetooth adapter. I've been searching around for a PCI-E/PCI based Bluetooth adapter but I've had no luck finding one - I've found some discontinued ones but they have giant antennas coming out the back - the person I'm building the computer for doesn't want that. I've been repeatedly insisting on him simply getting a USB Bluetooth dongle, but he doesn't want one taking up his external USB slots. This is the motherboard I'm using for his build: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157303 My question is if it's possible to use one of those laptop PCI-E cards in a motherboard like this that has PCI-E and PCI slots, or if the form factor is completely different and won't fit?

  Read the article

• Live noise-filter on line-in

  - by Damon Gant

  I'm running the following setup: Xbox 360 is hooked up to my (PC) screen via HDMI/DVI converter. Because the Xbox has no dedicated sound output, except for optical S/PIDF, I'm also using the AV/RCA output, namely just the audio, which is connected to an old stereo, which is then connected to my PCs line-in. I'm now experiencing a some of noise. I'm using one of the standard "Realtek High Definition Audio" cards, which doesn't seem to offer this kind of functionality. Is there a software that will playback audio right off a device while running filters on it? It doesn't have to create a device on its own, I just want to listen to it. Here's a sample: http://puu.sh/1suY6

  Read the article

• Black Screen when Computer Boots

  - by BlueRaja

  I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

  Read the article

• Site stopped working after adding NIC card

  - by Sachin Kainth

  My boss made a bit of blunder yesterday, he added a secondary NIC card to the a machine hosting a website so that it could be part of the local network. He also added it to the <blah>.local domain (which all our servers are being added too). The website failed following this. He thought this was because the machine was now called <blahblah>.<blah>.local, so he removed it from the domain and restarted. Same problem a asp.net error, something to do with a binding error. Sorry he didn’t make a note of it. He traced it back to the WCF services that are running on the site. Anyway, it looks like ASP.NET gets confused connecting to the database when there’s multiple network cards. The 173.x.x.x IP address (which is internal), doesn’t route to the internet.. Therefore it’s trying to connect via the wrong network. Any ideas about how to resolve it?

  Read the article

• HD Video Capture Card w/ Good API?

  - by Sheep Slapper

  Does anyone here know of a good HD video capture card that has a good (comprehensive) API? I administer a few servers that do some video encoding right now, but when we make the switch to HD cameras, they won't be sufficient. In addition to this, the servers we have now are black boxes, closed to me except to start/stop the video capture device. I'd like to be able to roll my own, so we can better integrate it with our existing systems, but I know almost nothing about what kind of HD capture cards are out there, and if I can avoid spending money just to test their APIs that would rock. So does anyone have any experience with this? All our other software is in C#, and I'd like to set up the new servers with web interfaces to start/stop the capture (also in C#, using .NET 3.5 probably). I'm not sure how language specific these APIs would be, but that's what I'm working with just as a reference point. I appreciate any help the community can give!

  Read the article

• Windows 7 and laptop overheating

  - by Nikola

  I am using ArchLinux 99% of my working time, and laptop has absolutely no heating problems. But when it comes to using Windows 7, laptop starts heating and one can clearly hear CPU fan working like crazy. I think it has something to do with CPU itself, because on Linux I can simply manipulate with CPU governors (eg. set it to ondemand), but I can't seem to find any similar software to do the same thing as if in Linux. Or, the heating might be caused because of two graphics cards or something? CPU-Z results http://valid.canardpc.com/show_oc.php?id=2310815 Any idea/solution regarding this issue?

  Read the article

• 3 monitors + a TV on a single card with Eyefinity?

  - by Paul Accisano

  Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

  Read the article

• Linux openSUSE 11.2 on VAIO Z890T

  - by alfredozn

  I have a VAIO Z-series (VGN-Z890T) and I want to install openSUSE 11.2. I found some guides to fix the problem for the video card switch, but all for older models, those preconfigured with windows vista. It looks like newer model use a different bios configuration to support hot swap between cards in Windows 7 and this change breaks the solution to my problem. I'm not an experienced linux user, but i was using it recently on my old computer ind definitively I want it on my laptop. I installed openSUSE once and i was trying and trying to solve it until I finished reinstall again and use a fresh installation. My question is: Does anyone has installed and configured successfully openSUSE on one of the latest vaio z laptops???

  Read the article

• Nvidia System Tools compatible with GTX 560 Ti?

  - by Paula Ferreira

  I want to download and use Nvidia System Tools with ESA suport. But on the "Supported Products" tab my GTX 560 Ti isn't listed. The product was last released on April last year, but it shows support for both the GTX 570 and 580 as well as the GTX 4x family. All sister cards of the GTX 560. Has anyone successfuly ran this nvidia product with the GTX 560 Ti? Why wasn't this card included on the list of supported products?

  Read the article

• Running hardware with only 32bit drivers in 64bit windows

  - by Howard

  Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

  Read the article

• Where do SATA drives get their power when using a PCI SATA controller on oler PCs?

  - by Sukima

  I've been looking into PCI SATA controller cards online for an older PC and noticed that the ports only have the SATA cable connector and the Power supply does not have the SATA power connectors. I also had a few external eSATA drives which don't power up unless I also plugin the USB cable. Therefore I realize that SATA and eSATA do not carry power and need power else where. When converting older PCs to use a PCI SATA controller how do you provide power to the SATA drives? Anticipating the answer to be some kind of converter cable (which I was unable to search for) then can older power supplies handle added drives? (Assuming a 4 port SATA controller means 4 more drives the power supply has to endure). Or do you have to get a second poer supply and kinda jerry-rig it into an old case?

  Read the article

• Windows 7 using exactly HALF the installed memory

  - by Nathan Ridley

  I've taken this directly from system information: Installed Physical Memory (RAM) 4.00 GB Total Physical Memory 2.00 GB Available Physical Memory 434 MB Total Virtual Memory 5.10 GB Available Virtual Memory 1.19 GB Page File Space 3.11 GB Also the BIOS reports a full 4GB available. Note the 4gb installed, yet 2gb total. I understand that on a 32 bit operating system, you'll never get the full 4gb of ram, however typically you'll get in the range of 2.5-3.2gb of ram. I have only 2gb available! My swap file goes nuts when I do anything! Note that I have dual SLI nvidia video cards, each with 512mb of on board ram, though I have the SLI feature turned off. Anybody know why Windows might claim that I have exactly 2gb of ram total? Note: previously asked on SuperUser, but closed as "belongs on superuser" before this site opened: http://serverfault.com/questions/39603/windows-7-using-exactly-half-the-installed-memory (I still need an answer!)

  Read the article

• NIC interface names in /proc/interrupts

  - by Gallus

  When I look at /proc/interrupts: $ cat /proc/interrupts CPU0 CPU1 (...) 12: 4 0 IO-APIC-edge i8042 14: 145 65310875 IO-APIC-edge ide0 50: 0 0 IO-APIC-level uhci_hcd:usb5, Intel ICH7 58: 5388 7983508 IO-APIC-level libata 169: 812427252 1236572641 IO-APIC-level skge, eth1 217: 6 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 225: 0 0 IO-APIC-level uhci_hcd:usb3 233: 60 3108720778 IO-APIC-level uhci_hcd:usb4, skge I can see two skge and one eth1 entries. All of them are the network cards. Because of the general name "skge" (which is the name of the network driver of the card) I can't easily reocognize, which NIC occupies which interrupt. How to make linux use more descriptive names in the entries? Or: Is there any alternative way to obtain INT information instead of /proc/interrupt? My final goal is to manipulate smp_affinities of the NICs.

  Read the article

• VirtualBox reinstalling & updating has left me with Too Many Network Adapters. How Do i remove them?

  - by S3curityPlu5

  I have too many network adapters. I have had to reinstall, repair VirtualBox a few times, and I have three NICs in my laptop. I definitely don't need to have 14 bridged networking drivers though, and I cannot uninstall them. I only want to keep the new ones that came with VirtualBox 4.1.20. When I go into the registry there are tons of places with these adapters. I have searched online up to 10 pages of Google, and VirtualBox forums, and no one has mentioned this problem nor explained how to delete these annoying extra network adapters. Please offer some assistance or at least tell me how anybody else has dealt with this. I only need 1 host-only network adapter, 1 bridged networking adapter for each of my network cards. Take a look:

  Read the article

• Server with 3 public IP and iptables

  - by Juan

  I have a linux box with two NIC cards: eth0 and eth1. In one card i have 3 public IP: eth0 = 10.10.10.1, eth0:1= 10.10.10.2 and eth0:2= 10.10.10.3 In the other card i have one local IP eth1 = 192.9.200.1 I want to redirect all the wan traffic for 10.10.10.2 to the LAN 192.9.200.2 and the same for 10.10.10.3 to 192.9.200.3 I have tried with this rule but doesn't work iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.2 -j DNAT --to-destination 192.9.200.2 iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.3 -j DNAT --to-destination 192.9.200.3 IP forward is enabled in /etc/sysctl.conf Can you help me, please.

  Read the article

• Flexible traffic & bandwidth monitor

  - by BrNathan

  I have looked around, but have not found anything to meet our needs. I need something that can log all connections & bandwidth consumption. We need it for analysis: by protocol, source IP (& MAC if possible), destination, etc. Ideally we are looking for something that can produce custom graphs & also uses mysql. All connections go through one server on a bridged connection (2 network cards) so it is easy to pickup traffic. We are not concerned so much with internal LAN traffic as what passes in & out to the firewall. Thanks for you suggestions. Update: I use Ubuntu 10.04

  Read the article

• 2 ATI Radeon HD 5870 (crossfire): Intermittent loud fan and non-functioning secondary card

  - by Merritt

  Installed 2 5870s. Left off the left side panel of my case(cooler master haf x), started my computer, installed the drivers and set up the crossfire... yada yada yada... everything worked fine. Then turned off computer, put left side panel back on, turned on computer, and heard a very loud buzzing (asssuming it was a gpu fan). Checked status of cards (in Windows 7) and the secondary card did not appear. Turned off the computer, took off left side panel, jiggled power connectors into secondary card, then turned the computer back on, and it worked again. Put the panel on, turned on computer, worked. Sometime later, turned on computer, and there's that loud fan sound again. What gives?

  Read the article

• Hardware Raid Card Reviews with SSDs

  - by Nalandial

  Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than testing the SSDs themselves. I'm looking for a review because I'm assuming that for example: 100% gain with two 7200rpm drives doesn't necessarily mean 100% gain with a pair of SSDs, since there would be higher speeds, meaning more throughput, meaning more processor/memory usage for the card. If this assumption is wrong then that's fantastic; however if it's true, I am quite sad and would really appreciate any advice or reviews you can find. Thanks in advance!

  Read the article

• Smart card authentication to a Cisco switch?

  - by murisonc

  We have our Cisco network devices configured to authenticate network administrators using their domain accounts via RADIUS running on a Windows 2008R2 server with the network protection role. This works great for logging into the switch via SSH when configuring the devices. We are now in the beginning stages of deploying smart cards for logins. Does anyone know of a way to login to a Cisco switch using a smart card instead of a domain username and password? The SSH client we are using is Putty. Workstations are Windows 7. RADIUS is running on Windows 2008R2. We are running our own certificate authority on Windows 2008; network is not connected to the Internet. We prefer to not have to purchase additional proprietary devices for this functionality.

  Read the article

• RDMA architecture - do you need adapters on both ends?

  - by Bobb

  I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

  Read the article

• How do I disable other monitors while running games in Wine?

  - by Michael Cheng

  My current setup is: * Dual GTS 250 video cards * 3 Monitors * Used nvidia-settings to run each monitor as a separate x session * This is all running on Linux Mint Debian Edition When running games (Starcraft II) in Wine via PlayOnLinux, I've found that the mouse does not get locked. I already tried various solutions littered across the web and none work so I'd rather just disable my other two monitors while playing. Does anyone know of a method where I can turn off my other two monitors (not my primary monitor) while running Wine and then turn then back on afterwards? I don't mind having to manually run a script before and after gaming. Thanks.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >