Search Results

Search found 1864 results on 75 pages for 'raid z'.

Page 36/75 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Toshiba G20-120 raid / sata drivers for integration with winxp or windows 7 installation

  - by ldigas

  The title pretty much says it all. Does anyone know where they can be downloaded ? Or how to turn off in bios sata for hdd's ? Bios is very simple, and I just don't see the option. In any case, anything that you could tell that would help me install a fresh xp or '7 windows, would be appreciated.

  Read the article

• High server load - [jbd2/md1-8] using 99.99% IO

  - by Alex

  I've been having spike in load over the last week. This usually occurs once or twice a day. I've managed to identify from iotop that [jbd2/md1-8] is using 99.99 % IO. During the high load times there is no high traffic to the server. Server specs are: AMD Opteron 8 core 16 GB RAM 2x2.000 GB 7.200 RPM HDD Software Raid 1 Cloudlinux + Cpanel Mysql is properly tuned Apart from the spikes, the load usually is around 0.80 at most. I've searched around but can't find what [jbd2/md1-8] does exactly. Has anyone had this problem or does anyone know a possible solution? Thank you. UPDATE: TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 16:05:36 399 be/3 root 0.00 B/s 38.76 K/s 0.00 % 99.99 % [jbd2/md1-8]

  Read the article

• Getting around the lack of GPT support with CentOS 5.4

  - by sxanness

  Here is my issue and I hoping that there is someone out there that has an answer so I don't end up stuck here at my co-location all day. Last night I came here and upgraded a server (Dell 2970) to have four 1TB Hard Drives in RAID 5 which leaves a 3TB block. I tried to partition this but keep getting an error that GPT is not supported so I found a site online telling me I need to run the dd command and right random data to /dev/sda. This is great (if it works) but taking forever. I have two more machines to upgrade today and not a chair in site. Does anyone have advice on how I can avoid this issue beforehand? Thank You for your advice and support.

  Read the article

• Why use multiple partitions on a rhel server?

  - by Jakobud

  I'm about to reformat and reinstall CentOS onto an old server. The server runs on a modest 30 node small business network and has a variety of responsibilities including MySQL, a Samba share, DHCPd & SVN/Trac. The old sysadmin had this server setup with almost a dozen different partitions for various things. I'm trying to understand what the advantages of multiple partitions are as opposed to a just one filesystem at /. Speed? Flexibility? Security? It seems like if you misjudge the necessary size for any given partition and it ends up filling up too fast, it requires a sysadmin to go in and expand the partition, etc... Seems like it would be easier if everything was just one flat / filesystem. But I'm sure there are some advantages I'm not aware of. The server is currently running a handful of HDDs raided to ~2TB (raid 0).

  Read the article

• Does vmWare ESXi 4.0 U1 support the Promise SuperTrak EX8650 SATA card?

  - by RTNN

  Hi, can anyone tell me if vmWare ESXi 4.0 U1 has support for the Promise SuperTrak EX8650 SATA card? In the hardware support guide I find that VmWare should have support for the Promise SuperTrak EX8650 SATA card but only in version ESX 3.5. Is this card not supported for ESXi 4.0 U1 or what? From the hardware guide! Partner Name Model Manufacturer Device Type Supported Releases Promise SuperTrak EX8650 Promise Technology Inc SAS-RAID ESX 3.5 U5*1 1 , ESX 3.5 U4*1 1 Promise SuperTrak EX8760T Promise Technology Inc SAS ESX / ESXi 4.0 U1*2 2 , ESX / ESXi 4.0*2 2

  Read the article

• kernel: journal commit I/O error

  - by jasondewitt

  I am having some problems with a Dell 1950 server. I am installing RHEL 4.6 along with Oracle and some other software on here. I am randomly getting an error message saying "kernel: journal commit I/O error" on my ssh session and on the monitor I have hooked up to the server I see an error scrolling by that says "EXT3-fs error (device sda5) in start_transaction: Journal has aborted." It has happened several times but never at the same point during the install. Actually, this last time the system was up and running and I was just trying to import a database into oracle. This has happened on several hard drives, so I'm pretty sure that is not the problem. This makes me think the raid controller is going bad. What do you guys think? ** UPDATE ** Pretty sure it was a bad hard drive. I threw another drive in the server and it's been running for about 48 hours with out problems.

  Read the article

• Upgrading NAS hard drives

  - by Mihai Damian

  I was thinking of buying a NAS for home-usage. I've never used a NAS or had HDDs set up in Raids. Before I commit myself to moving all my data to a NAS I need to find out how difficult it is to upgrade and replace the NAS' hard drives. Suppose I set up a Raid 1 NAS with two 1TB hdds. At some point in the future I will use up all the space and will have to install two new 2TB hdds. Now I'll need to migrate the data from the old disks to the new ones. Will I have to hook up one of the old disks in a computer and copy all the data back in the NAS? Or can the migration be done using only the NAS? I realize the answer to the question might depend on the NAS model. Being a simple for-home solution I was thinking of getting something along the lines of D-link's 323.

  Read the article

• How to detect hard disk failure?

  - by Devator

  So, one of my servers has a hard disk failure. It's running software RAID, the system locked up and according to /proc/mdstat (and /var/log/messages), it's really down: Personalities : [raid1] md2 : active raid1 sdb2[1] 104320 blocks [2/1] [_U] md5 : active raid1 sdb5[1] 2104448 blocks [2/1] [_U] md6 : active raid1 sdb6[1] 830134656 blocks [2/1] [_U] md1 : active raid1 sdb1[1] 143363968 blocks [2/1] [_U] and Nov 5 22:04:37 m38501 smartd[4467]: Device: /dev/sda, not capable of SMART self-check However when I do smartctl -H /dev/sda, it passes the test. It also passes the test with smartctl --test=short /dev/sda. So, is smartctl a broken testing tool, or am I doing something completely off?

  Read the article

• Adding a single 300Gb SCSI drive to poweredge 2850

  - by John Steele

  I have a 2850 setup with 3 146Gb drives, two partitions 1 12GB system with server 2003 sp2 and 1 261Gb Data. I am strapped on disk space on the data partition having to push data around. I wanted to add a 300Gb single drive for lesser critical data, is this possible? Or is it best to add 2 300Gb drives for another RAID 1 configuration? This is my church network and while it is mission critical it is not enterprise so I can take it down for a few hours. Any pointers to documentation or direct help would be greatly appreciated. John

  Read the article

• best storage option for recording live streaming video

  - by Alchemical

  We're creating a new web site that includes video chat capabilities. Wowza Server is being used for the streaming media. We would like the capability for users to record their video chats in certain circumstances. Is it feasible to record the videos to the same server running Wowza? Or performance-wise, would it make more sense to store them on another server? I understand SANs are popular as well, but I'm a little concerned about cost for those as we are on a fairly tight budget. Currently we have two servers with pretty decent RAID cnofigurations for storage, one has 14TB and the other 6TB. Mostly concerned if doing the recording on the same server as the streaming server (or web server), could significantly adversely affect that server's primary function.

  Read the article

• Anyone tried dd'ing Raidmembers?

  - by DusteD

  I want replace all disks in a 10 disk raid6 (linux software raid). I could do this by pulling a disk, let the array rebuild, rinse, repeat. But this would take a very long time, and cause 10 rebuilds, which would most likely stress all 10 disks much more than simply reading each disk through once. My question is thus: Could I just shut down the array, and dd each old disk to a new disk and then start the array with the 10 new disks? In an ideal world, I would build another server and just copy the data via network, but this is not an ideal world.

  Read the article

• PERC 5/i Enable alarm on disks failures

  - by Andy M

  I'm trying to enable one the alarm of my server's raid controller PERC 5/i. Using this documentation, under the chapter Audible Alarm Warnings, it's explained that enabling an audible alarm is allowed in order to quickly spot failures on my hard disks. My trouble is that when entering the disk controller configuration (Ctrl+R at boot time), I'm able to set up lot of things but I cannot navigate to Enable Audible Alarm. I have : Enable Controller BIOS Enable Alarm Enable BIOS stop on Error I can navigate with my arrow keys to both the first and third items, but I cannot navigate to or select the second! It's not greyed out, and seems like I should be able to select go on this entry, but my cursor keep skipping it. Any ideas about what I'm missing here?

  Read the article

• What's the best external hard drive configuration for a software developer laptop?

  - by Dan

  I've got a Dell laptop that I use as a software developer box at work and find that the drive is usually the bottleneck. I'd like to hook up two 10k RPM drives that are striped for performance. I've looked for drive cases with RAID but there don't seem to be very many choices and I'm worried about compatibility with the drives (preferably SATA 2). Also I don't have a SATA connection on my machine so it'll have to USB 2.0 for now. Am I headed down the right path or am I missing a much simpler configuration?

  Read the article

• Data drive disappearing.

  - by Mike Keller

  We have a Windows 2003 R2 server with SP 2 here that randomly loses a partition. There are two partitions the C: and the D: (the one that disappears). When I go into Disk Management the space shows available on the drive but that it isn't formated. There are two drives that are set up in a RAID 1 array. There isn't anything sticking out in the event log as to something triggering this problem and thank god we do daily backups of the data, but it gets kind of annoying to have to go back in there and reformat the partition and restore the data. Any places I can poke around to find the cause of this or even better solutions to the problem would be appreciated.

  Read the article

• RAID0 PROBLEM WITH A SONY SPORTING A NEW HDD

  - by redrock

  Sony Windows 7 PC. Originally had 2 x 300Gb HDD. One HDD completely pancaked so have replaced with a new 500Gb HDD. When both drives are connected the 300GB doesn't appear to be recognised as a 300Gb HDD as a seperate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached unde disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 seperate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

  Read the article

• SAN shows as unallocated in Windows Server

  - by Gareth Ferneyhough

  Hello. We have a SAN drive that shows as unallocated in Windows Server 2008. I believe it is a raid 10 with 4+ disks. The disks are in good health. I think a server that we rebuilt tried to connect to the drive and re-initialized them, or re-wrote the partition table. (excuse my poor terminology). We ran TestDisk on the drive and it shows no partitions, so now we are doing a quick search (which is not so quick). Can anyone else suggest anything? Thanks, Gareth

  Read the article

• Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

  - by Giffyguy

  I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

  Read the article

• iSCSI RAID1 on two servers, fail scenario

  - by Franz Kafka

  Hallo, a simple question: Image I have two servers, each server has two disks in RAID1. Now I merge the two arrays with iSCSI to one RAID1 disk. Two questions: Can I do the merging of the 4 disks in one go? I can't image how. First I will have to install the os, and then the raid controller is already set up to RAID1. If a whole server fails the other server would continue working without any problems? Does iSCSI notice that the other server is missing and treet this as if the two disks were broken? When the server comes back online the data is resynced, as if I installed new disks into a array? Can I image that this way? Thanks alot.

  Read the article

• Configuration Tuning for PostgreSQL 9.1 PostGIS 1.5 Ubuntu 12.04 Server

  - by Martin

  My server performance is poor. At times SSH, top, and other features or commands are very slow to respond, taking several seconds or more. A query that normally takes 5 minutes can sometimes take 30 minutes. The database is mostly being used to do a spatial query (grid and summarize) on approximately 500GB of stored data spread between 4 tables. Restarting the server works as a temporary fix, but cannot be used as a long term solution. Any suggestions for how to diagnose and solve my performance issues? Hardware and Configuration: 3.3 GHz Intel quad core i5 16 GB DDR3 RAM 6 TB software RAID 10 (6 x 2 TB drives) Ubuntu 12.04 64-bit Postgres 9.1 PostGIS 1.5

  Read the article

• ESXi 4.0u1 - backup/copy options

  - by Hanadarko

  I have a machine built using ESXi 4.0u1 and it has 3 hard drives. I have my hosts built on different hard drives but wondering about backup options. I do not have RAID but I have 3 drives and 1 is totally empty. I had been using it to store ISOs for loading. So what options do I have to either create a 1 time copy onto the spare drive or some sort of snapshot to the spare drive? - There must be some way to do this either via the vsphere client or ssh into the ESXi box and go from there. Thoughts? -JD

  Read the article

• Disk is apparently in use by the system

  - by Shaun

  I've just fitted two disks to my home server. I'm trying to format and then raid them but I'm getting a problem that hours of Googling hasn't resolved this. The error that I'm getting is: # mkfs.ext3 /dev/sdb1 mke2fs 1.39 (29-May-2006) /dev/sdb1 is apparently in use by the system; will not make a filesystem here! # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 4.0G 1.9G 2.0G 49% / none 380M 0 380M 0% /dev/shm /opt/xensource/packages/iso/XenCenter.iso 51M 51M 0 100% /var/xen/xc-install # mount -t ext3 /dev/sdb1 /mnt/b mount: /dev/sdb1 already mounted or /mnt/b busy I'm new to this and it's got me beat. I wouldn't ask if I hadn't done my research first. Thanks.

  Read the article

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

• Booting Windows7 kernel from an initrd/wim image file

  - by Ivo

  I'm wondering if it's possibile to have Win7 kernel and relative drivers (especially storage drivers) to boot from an initrd-like image file (maybe .wim?) and later then mount the windows root partition and complete the load of the full OS? I'll try to explain why: I'm running an emulated environment with NO REAL BIOS, and I'm passingthrough a raid storage controller. I want windows to boot from this controller array, but of course the BCD manager cannot access disks in the array until kernel and relative controller storage drivers are loaded. To be clear I get the classical winload.exe missing error. I need a similar solution to what Linux does, loading the kernel and his drivers, and later then mount the root partition and complete the boot. Any ideas or advices?

  Read the article

• Get error (Repair Filesystem) 1 # when I install 4 new Hard drives in RedHat Linux 5 on a Dell PowerEdge 2900

  - by Alos Diallo

  Hi I am using a Dell PowerEdge 2900 running RedHat 5. I had 4 drives in the system using a Raid 5, I purchased and installed 4 more drives keeping the configuration the same. Set up the Vertual disks in PERC 6/i. When I exit out and reboot the system I get the following: fsck.ext3: No such file or dirrectory while trying open /dev/ddb1 [FAILED] ***An error occurred during the file system check. ***Dropping you to a shell; the system will reboot ***when you leave the shell. Then am prompted for the root pw. I enter it and am then prompted with: (Repair filesystem) 1# if I type fdisk -l I get some info on the disk along with: Disk /dev/sdb doesn't contain a valid partition table I am then prompted for (Repair filesystem) 2# If I reboot I am taken to the same screen again. The system was working before this happened. Does anyone know why this is happening and or what I can do to fix it? Thanks

  Read the article

• IBM x226 server with Windows 2003 freezing and showing one HDD degraded

  - by Zvonko Telefonko

  We have an IBM x226 server with Windows 2003 running on it. For weeks it's been very slow and it freezes at least once each day. At the boot it show message "degraded" for one HDD and optimal for other HDDs. We have 4 HDDs in it set up in Raid 1. HDD 1 - HDD 2, HDD 3 - HDD4. It seems that HDD2 is the one who is causing problems (showing degraded status). There's an amber led blinking on it together with the green one. We installed ServerRAID manager downloaded from IBM and it gave us option for "rebuild". But the server froze at some point and now it's rebuilding from start again. I've done some Googling and it says that it could be to failing HDD or some cache battery. How can we verify what is the cause of this?

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >