Search Results

Search found 5628 results on 226 pages for 'ram kumar'.

Page 36/226 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43 | Next Page >

Search network device from LAN through my C++ application and change the IP address

- by Arun Kumar K S

I am developing an application in C++ to communicate with my network device. I used UDP classes to search the device from the network. I done the code in such a way that from my application a broadcast message will send to the local network. The device will respond to the broadcast message and the application will get the IP address from that response. After establishing a network communication send a message to the device for changing the IP address. That worked fine if my devices IP address is correct. But when I set a wrong IP address and subnet to the device. My application will never get any messages from the device. So I can't able communicate to the device and not able get the device and unable to change the IP address etc. Say example IP address of the device 20.1.1.1 Subnet Mask 255.0.0.0 And in my system that runs the application IP address 192.168.1.23 Subnet Mask 255.255.255.0 I tried the Lantronix device installation software with their Lantronix device in network. It listed the device from the network and I am able to change the IP address from their software. Any one know how this is done in this type of software? How I can search in network to find the device and change the IP address when its IP address is not in range? Which protocol they used to find the device?

Read the article
Oracle VM Moves into Challenger Position in the Latest Gartner Magic Quadrant

- by Monica Kumar

Oracle Innovations boost Oracle VM into Challenger Position in Gartner x86 Server Virtualization Infrastructure Magic Quadrant Oracle VM's placement in the just published Gartner x86 Server Virtualization Infrastructure Magic Quadrant affirms the Oracle strategy and is also supported by strong customer momentum gains. Optimizations delivered in Oracle VM releases during this last year along with easy software access and low cost licensing have moved Oracle’s placement into the Challenger quadrant in a very short time. Oracle continues to focus on delivering a strong integrated virtualization with Oracle VM and the managed stack in the following areas: Integrated management with Oracle VM and all layers of the Oracle stack from hardware to virtualization to cloud Application-Driven virtualization with Oracle VM templates for rapid enterprise application deployment Certified Oracle applications on Oracle VM Complete stack solution offering more values to customers Get a copy of the Magic Quadrant for x86 Server Virtualization Infrastructure report to read more about how Oracle VM rapidly moved up in its new position.

Read the article
Impressions from VMworld - Clearing up Misconceptions

- by Monica Kumar

Gorgeous sunny weather…none of the usual summer fog…the Oracle Virtualization team has been busy at VMworld in San Francisco this week. From the time exhibits opened on Sunday, our booth staff was fully engaged with visitors. It was great to meet with customers and prospects, and there were many…most with promises to meet again in October at Oracle OpenWorld 2012. Interests and questions ran the gamut - from implementation details to consolidating applications to how does Oracle VM enable rapid application deployment to Oracle support and licensing. All good stuff! Some inquiries are poignant and really help us get at the customer pain points. Some are just based on misconceptions. We’d like to address a couple of common misconceptions that we heard: 1) Rapid deployment of enterprise applications is great but I don’t do this all the time. So why bother? While production applications don’t get updated or upgraded as often, development and QA staging environments are much more dynamic. Also, in today’s Cloud based computing environments, end users expect an entire solution, along with the virtual machine, to be provisioned instantly, on-demand, as and when they need to scale. Whether it’s adding a new feature to meet customer demands or updating applications to meet business/service compliance, these environments undergo change frequently. The ability to rapidly stand up an entire application stack with all the components such as database tier, mid-tier, OS, and applications tightly integrated, can offer significant value. Hand patching, installation of the OS, application and configurations to ensure the entire stack works well together can take days and weeks. Oracle VM Templates provide a much faster path to standing up a development, QA or production stack in a matter of hours or minutes. I see lots of eyes light up as we get to this point of the conversation. 2) Oracle Software licensing on VMware vSphere In the world of multi-vendor IT stacks, understanding license boundaries and terms and conditions for each product in the stack can be challenging. Oracle’s licensing, though, is straightforward. Oracle software is licensed per physical processor in the server or cluster where the Oracle software is installed and/or running. The use of third party virtualization technologies such as VMware is not allowed as a means to change the way Oracle software is licensed. Exceptions are spelled out in the licensing document labeled “Hard Partitioning". Here are some fun pictures! Visitors to our booth told us they loved the Oracle SUV courtesy shuttles that are helping attendees get to/from hotels. Also spotted were several taxicabs sporting an Oracle banner! Stay tuned for more highlights across desktop and server virtualization as we wrap up our participation at VMworld.

Read the article
How to connect to a WCF service using IP of the host machine where the service is hosted?

- by Kumar

I have a secured WCF service (https://<MachineName>:sslport/services) self hosted in a machine. Different instances of same service are deployed in differnt machines. From a client app, I am able to connect to theses services through code, i.e. using ChannelFactory() with the same endpoint address. But if I try to access the service using the endpoint address as https://<ipAddress>:sslport/services replacing machines name with machine IP address, I am getting some error stating "could not establish trust relationship". I know this is an error caused by SSL certificate that it could not establish a trust relationship. Are there any settings or any possibilities to make this work?

Read the article
How to retrieve packages from an ISO?

- by Santosh Kumar

I have an ISO image of BackTrack and I want to try it, but I don't want to mess up my bootloader with installing 2 Linuxes and a Windows. As BackTrack is Debian based I want to use its packages in my current Ubuntu. I tried mounting the ISO with Archive Mounter but whole operating system seems to be in casper/filesystem.squashfs file. I have seen this answer but none of those methods work, because I can't find any pool directory. The only file I suspect is filesystem.squashfs which is 3.3 GB in size. Please help me install tools from BackTrack's ISO.

Read the article
Google Cache showing wrong URL

- by Sathiya Kumar

I searched the cache details of the URL http://property.sulekha.com/pune-properties but the Google Cache showing details for property.sulekha.com. I don't know why it's showing like this. Not only for http://property.sulekha.com/pune-properties but also for all the Indian city relates URL's like http://property.sulekha.com/chennai-properties , http://property.sulekha.com/mumbai-properties , http://property.sulekha.com/kolkata-properties etc. Even i don't find these urls in the Google search result. If i search Chennai properties in Google, i find property.sulekha.com and not http://property.sulekha.com/chennai-properties . Why its happening like this? Please let me know

Read the article
Google Authorship Image of my blogspot has been disappeared in Google SERP. Why?

- by Sathiya Kumar

I have a blogspot and i used my image to appear on the Google SERP for my keywords using Google Authorship Markup. My image was showed for last 2 months but while checking SERP for my blog, i found that my authorship markup is not working. My image, name and G+ followers count is not appearing near my blogspot URL in SERP. I didn't made any changes in my google+ profile or in my blogspot header tag where i had put the authorship code. I tried to find the reason but i didn't find any value answer. May anyone answer this question. Please let me know if you had already experienced like this.

Read the article
How to implement a game launch counter in LibGDX

- by Vishal Kumar

I'm writing a game using LibGDX in which I want to save the number of launches of a game in a text file. So, In the create() of my starter class, I have the following code ..but it's not working public class MainStarter extends Game { private int count; @Override public void create() { // Set up the application AppSettings.setUp(); if(SettingsManager.isFirstLaunch()){ SettingsManager.createTextFileInLocalStorage("gamedata"); SettingsManager.writeLine("gamedata", "Launched:"+count ,FileType.LOCAL_FILE ); } else{ SettingsManager.writeLine("gamedata", "Not First launch :"+count++ ,FileType.LOCAL_FILE ); } // // Load assets before setting the screen // ##################################### Assets.loadAll(); // Set the tests screen setScreen(new MainMenuScreen(this, "Main Menu")); } } What is the proper way to do this?

Read the article
How can I connect to wireless network using a wireless dongle in Ubuntu 11.10?

- by Ajita Kumar Nayak

i have dual operating system xp and ubuntu 11.10 and trying to connet internet by using HSDPA 3GPP Release5 Micromax Dongle but it is working in windows xp not in ubuntu.I am unable to connect internet even i have done my edit connection and all the setting using aircel network but unable to connect internet.plz give me a sugession how could i do manually. How can I connect to wireless network using a wireless dongle in Ubuntu 11.10?

Read the article
How to set up Google DFP (DoubleClick for Publishers) for a site?

- by Manoj Kumar

I have a website and I have an AdSense account as well. I have integrated AdSense and ads are also getting displayed (480 x 60). Somewhere I read that I can manage the ads that are being shown in my website (480 x 60) and filter out the ads on a CPM/CPC basis. NOTE: I don't have any ads to be displayed on other's websites. I just want to show other's ads on my website. Now, can I use Google DFP to manage the ads? I mean is Google DFP useful for me to filter the ads and get me more revenue?

Read the article
ADF How-To #4: Adding a View Criteria and a Search Panel

- by Vik Kumar

In this week's How-To we are explaining how to add a view criteria to VO and then use it to create a Search Panel via customization. The detailed steps can be found here . We have also prepared a video walking you through the steps, available via our Youtube Channel. For any questions or comments, please use the comments section below or visit our OTN forum. We are always looking for topic suggestions for additional How-Tos.

Read the article
Which tools helps to start Ubuntu GUI when boot?

- by Vimal Kumar

I am on the way to create a Live CD from scratch. I used Virtual Box for this purpose. I installed Ubuntu base from ubuntumini.iso and installed gnome-shell. And installed Remastersys and created a backup.iso. Burned in a CD and boot from a PC. It end in CLI. Not lead to GUI. I tried the same ISO in VirtualBox. But it work properly there. I think I missed some packages which help to start GUI. Can you help me to identify the packages missed to include in the CD?

Read the article
Oracle Virtualization Friday Spotlight - November 8, 2013

- by Monica Kumar

Hands-on Private Cloud Simulator In One Hour Submitted by: Doan Nguyen, Senior Principal Product Marketing Director My aeronautics instructor used to say, "you can’t appreciate flying until you take flight." To clarify, this is not about gearing up in a flying squirrel suit and hopping off a cliff (topic for another blog!) but rather about flying an airplane. The idea is to get hands-on with the controls at the cockpit and experience flight before you actually fly a real plane. After the initial 40 hours of flight time, the concept sank in and it really made sense.This concept is what inspired our technical experts to put together the hands-on lab for a private cloud deployment and management self-service model. Yes, we are comparing the lab to a flight simulator! Let’s look at the parallels: To get trained to fly, starting in the simulator gets you off the ground quicker. There is no need to have a real plane to begin with. In a hands-on lab, there is no need for a real server, with networking and real storage installed. All you need is your laptop The simulator is pre-configured, pre-flight check done. Similarly, in a hands-on lab, Oracle VM and Oracle Enterprise Manager are pre-configured and assembled using Oracle VM VirtualBox as the container. Software installations are not needed. After time spent training at the controls, you can really appreciate the practical experience of flying. Along the same lines, the hands-on lab is a guided learning path, without the encumbrances of hardware, software installation, so you can learn about cloud deployment and management. However, unlike the simulator training, your time investment with the lab is only about an hour and not 40 hours! This hands-on lab takes you through private cloud deployment and management using Oracle VM and Oracle Enterprise Manager Cloud Control 12c in an Infrastructure as a service IaaS model. You will first configure the IaaS cloud as the cloud administrator and then deploy guest virtual machines (VMs) as a self-service user. Then you are ready to take flight into the cloud! Why not step into the cockpit now!

Read the article
How do I get Catalyst 11.10 with ATI Radeon Mobility HD 5470 working on an HP DV7?

- by S Kumar

I have a HP DV7 with a HD 5470 512M card. Installation of the Catalyst 11.10 is repeatedly failing on a fresh install of Ubuntu 11.10. Catalyst 11.8 proprietary drivers were working well with Ubuntu 11.04. I have tried installing directly from the .run and generating the distribution specific packages. Nothing has worked. After installation which goes through successfully, the system hangs on reboot after the flashing dots. I have to replace the /etc/X11/xorg.conf to get the X working. I have followed instructions as per the http://wiki.cchtml.com/index.php/Main_Page wiki. Request for support to ATI/AMD gives the response that this model is unsupported on Linux by HP :). Updated 14-Nov I have reverted back to the open source drivers which work well enough for me.

Read the article
How should I determine direction from a phone's orientation & accelerometer?

- by Manoj Kumar

I have an Android application which moves a ball based on the orientation of the phone. I've been using the following code to extract the data - but how do I use it to determine what direction the ball should actually travel in? public void onSensorChanged(int sensor, float[] values) { // TODO Auto-generated method stub synchronized (this) { Log.d("HIIIII :- ", "onSensorChanged: " + sensor + ", x: " + values[0] + ", y: " + values[1] + ", z: " + values[2]); if (sensor == SensorManager.SENSOR_ORIENTATION) { System.out.println("Orientation X: " + values[0]); System.out.println("Orientation Y: " + values[1]); System.out.println("Orientation Z: " + values[2]); } if (sensor == SensorManager.SENSOR_ACCELEROMETER) { System.out.println("Accel X: " + values[0]); System.out.println("Accel Y: " + values[1]); System.out.println("Accel Z: " + values[2]); } } }

Read the article
Sound card not detected in 13.04

- by Ganessh Kumar R P

I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

Read the article
Attending MySQL Connect? Your Opinion Matters.

- by Monica Kumar

Take the MySQL Connect 2012 Survey Thanks to everyone who is at the first ever MySQL Connect Conference in San Francisco this weekend! Don't forget to take your Conference and Session Surveys. Your opinions help shape next year's conference. Take a survey for each of the sessions you attend and be entered into a drawing for one prize for $200 American Express Gift Certificate. Fill in the daily conference survey and be entered into a drawing for one prize for a $500 American Express Gift Card Surveys are located here. Make your opinion count! Take the survey now. Congratulations to Robin Schumacher from DataStax as he is the winner of the Saturday survey!

Read the article
Testing web applications written in java

- by Vinoth Kumar

How do you test the web applications (both server side and client side code)? The testing method has to work irrespective of the framework used (struts, spring web mvc) etc. I am using Java for the server side code, Javascript and HTML for the client side code. This is the sample test case of what I am talking about: 1. When you click on a link, the pop up opens. 2. Change some value in the pop up (say a drop down value) and it gets saved in the DB. 3. Click the popup again, you get the changed values. Can we simulate this kind of thing using unit test cases? Is JUnit enough for this?

Read the article
Outgrew MongoDB … now what?

- by samsmith

We dump debug and transaction logs into mongodb. We really like mongodb because: Blazing insert perf document oriented Ability to let the engine drop inserts when needed for performance But there is this big problem with mongodb: The index must fit in physical RAM. In practice, this limits us to 80-150gb of raw data (we currently run on a system with 16gb RAM). Sooooo, for us to have 500gb or a tb of data, we would need 50gb or 80gb of RAM. Yes, I know this is possible. We can add servers and use mongo sharding. We can buy a special server box that can take 100 or 200 gb of RAM, but this is the tail wagging the dog! We could spend boucoup $$$ on hardware to run FOSS, when SQL Server Express can handle WAY more data on WAY less hardware than Mongo (SQL Server does not meet our architectural desires, or we would use it!) We are not going to spend huge $ on hardware here, because it is necessary only because of the Mongo architecture, not because of the inherent processing/storage needs. (And sharding? Please! Cost aside, who needs the ongoing complexity of three, five, or more servers to manage a relatively small load?) Bottom line: MongoDB is FOSS, but we gotta spend $$$$$$$ on hardware to run it? We sould rather buy commercial SW! I am sure we are not the first to hit this issue, so we ask the community: Where do we go next? (We already run Mongo v2) Thanks!!

Read the article
Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

- by user28930

I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

Read the article
How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

- by Burnzy

I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

Read the article
Best CPUs for speeding up compiling times of C++ w/ DistGCC

- by Jay

I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

Read the article
Best CPUs for speeding up compiling times of C++ w/ DistGCC

- by Jay

I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

Read the article
Best CPUs for speeding up compiling times of C++ w/ DistGCC

- by Jay

I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

Read the article
On Windows and Windows 7's Task Manager, why Memory is 1118MB Available but only 62MB Free? [closed]

- by Jian Lin

Possible Duplicate: Windows 7 memory usage What are the "Cached", "Available", and "Free" memory in the following picture (From Windows 7's Task Manager). If it is 1118MB Available, then why isn't it Free (to use)? As I understand it, if a bowl of noodle is available, that doesn't mean it is free... it may still cost $7. But what about in the Task Manager, when it is Available, it is also not Free? Does it cost $2 per MB? What about the "Cached"... What exactly is the Cached Memory? We may put some hard disk data in RAM and so we cache the data in RAM, for faster access (that's the operating system's job). So the Total Physical RAM is 6GB, what is the 1106 Cached? Cached in where? Caching physical RAM in ... some where? It is also strange that the Cached value is sometimes higher and sometimes lower than the Available value. Can somebody who is knowledgeable about this shred some light on these meanings?

Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43 | Next Page >