Search Results

Search found 1409 results on 57 pages for 'repair'.

Page 36/57 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

  - by Forgiver

  I have an external hard drive that is connected to my computer (Windows 7 Ultimate 64 bit) via a USB port. BitLocker has been activated on the hard drive to protect the data. Yesterday I started downloading a huge data from the internet but now it failed to complete because of CRC error. I tried to repair it with chkdsk f:/r where f is the drive letter of that hard drive. There are many messages reporting "unreadable" as follows: What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

  Read the article

• setting up bridged adapter for VPN server

  - by B. VB.

  I have an Ubuntu linux Linode server that I am trying to install OpenVPN on. I'm following the tutorials (which, it turns out, are quite incomplete). auto br0 iface br0 inet static address 192.168.0.10 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off When I add this chunk in my /etc/network/interfaces, and I restart networking, my eth0 interface does not have an IP and I cannot get on the network (I need to use a buggy, slow, and annoying AJAX term to do damage repair). Why does adding this screw everything up? Any tips on how to set up this bridged adapter?? Thanks in advance!

  Read the article

• How do I recover files from a corrupt VDI file?

  - by Eric P

  Is it possible to repair a corrupt VDI file? The OS on the VDI (XP) doesn't boot at all, it just hangs at a black screen. I was getting file errors before on its last boot, but now its not working at all. Sector viewer shows 'Invalid partition table Error loading operating system Missing operating system'. I tried mounting the file from the host OS, but it just says that the drive isn't formatted. I don't need to be able to run the VDI, but I do need some files that are on it. Is there any way to recover files from the corrupt VDI file?

  Read the article

• Ways to remotely reboot a Linux system

  - by dualed

  I had a remote server running Debian Sarge that experienced some HDD failure and I meant to reboot it hoping that fsck could repair the errors automatically. I eventually drove out there and replaced the faulty disks... But I was wondering: What other ways are there to force a Linux system to reboot that do not require hard drive access? What I had tried: shutdown -r now Did not work, as shutdown is a program that would have to be loaded from disk, the error shown in the terminal was bash: /sbin/shutdown: Input/output error init 6 same as above telinit q same as above kill -2 1 This did not print an error, but did not work either. (However, it is possible that the Sarge init did not implement SIGINT, the sarge manpages did not mention it. So it could work in a more recent version of Debian) This guide on PCFreak.net. However, this failed at sysctl, which was not in memory either.

  Read the article

• Corrupted file, hard drive test?

  - by all-R

  Hi guys, I'm currently on a macbook with a 1TB external hard drive connected trough a USB hub wich is connected on my macbook. The problem is, my disk, wich is partitioned in 2 (one HFS+ and one NTFS) keeps getting corrupted, recently it was my HFS+ partition, I could not repair it using the Apple's Disk utility, but was able to backup my files. Is it synonym that my hard drive is failing? Is it because of my USB hub? I also keep all my iTunes library on my external HD (HFS+ partition), and did a lot of transfer lately, adding files, removing etc. the last time, my partition got corrupted after a lot of deleted items. If anybody has an idea of what to check first, what could cause the problem, I would appreciate it :) Thanks!

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• Computer never connects to the internet automatically on startup?

  - by RawR Crew

  I have my Windows Vista laptop connected directly to the router via an ethernet cable, and every time I switch the computer on, the computer cannot connect to the internet. It comes up as limited or no connectivity, I am assuming because it has not been assigned an IP address by the router - not too sure if this is right. The problem is usually fixed either by performing a repair through the networking control panel or removing and re-inserting the ethernet cable. It will also connect without doing any of these if the computer is left idle for about 20 minutes. It will connect fine wirelessly without the need for any of this, however I would prefer to connect via the cable. Any ideas how I can fix this? I have replaced the ethernet cable and router already (identical model) but these haven't helped. Thanks for any help on this.

  Read the article

• Windows Vista: TCP/IP stack is smashed, how to reinstall the LAN-Devices?

  - by Ice

  the TCP/IP stack is smashed, thats why no LAN-Connections are running. I want to download the LAN drivers from another computer and uninstall and reinstall the LAN devices on this system. Hopefully that should recreate the stack. But what to download? What uninstall? How to install? Windows Vista is protected against such changes, so how to achieve that job? please help. Update per 2011-03-11: I found all the tipps and hints about "TCP/IP Repair, LSP Fix, and WinSock Fix" according to windows vista but nothing helped to bring back network access. What can i do as next step or which opportunities are left?

  Read the article

• Problem opening password encrypted .docx file on Word 2003

  - by molecule

  Hi all, I am having a problem opening a .docx file on my Word 2003. I have installed the Compatibility pack for 2007 but when i try to open this particular file, I receive the error "Word experienced an error trying to open the file. Try these suggestions. 1. Check the file permissions for the document, 2. Make sure there is sufficient free memory and disk space, 3. Open the file with the Text Recovery converter. I do not think it is any of the errors as I am able to open it on a different PC with Word 2003 as well. I also do not have any issues opening any non-password encrypted .docx files. Has anyone experienced the same issue? Most posts on the internet relate to "open and repair" but as mentioned, I am able to open this file on another PC without any problems. Any advice is greatly appreciated. Thanks, George

  Read the article

• How to reinstall OS X 10.8 without internet?

  - by Sam

  I had a crash on my Macbook Air MD231 - Mid 2012, and my system won't boot, and unfortunately my friend erase my partition from disk utility. Now I have three question 1)my internet speed is very low, for re-installing I have to download all of the OS X 10.8 from internet? or I can download it and install it via USB port?(how??) 2)I have to select this option ? "re-install OS X" , and what about size of that? (for example 4.2 Gb) 3)after installing , is there anyway to restore my dada? unfortunately I have not any backup right now, after I turning my Mac on, it's automatically going to repair mode... thnx for your kind

  Read the article

• Movie colors are off on ubuntu

  - by chris

  I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

  Read the article

• HP dv9000 Vista laptop won't boot from CD/DVD drive

  - by ScottEdwards2000

  My HP dv9000 Vista laptop recently got the BSOD with error 0x0000c1f5. The only way to fix this error is to be able to boot from CD/DVD and use some repair software I have. The problem is that the laptop REFUSES to boot from any CD/DVD I try. I've changed the boot order so the CD/DVD is first, and I can hear the drive spin up a bit upon power-up, but after a second, it spins down and then the laptop tries to boot from hard drive. Any ideas? (I've tried lots of CDs so it's not the media itself) Thanks much!

  Read the article

• USB connection issue

  - by user1664417

  Currently Im facing an issue when Im trying to connect any usb flash drive to my pc. ok, below is what happens to me: 1) I can connect usb keyboard and mouse without any issue. 2) however when i connect usb flash drive, there are 2 situations that are occuring randomly a) there is no usb drive mount in my computer, when device manager is checked, it shows error code 10, but is shown in disk management. b) my computer will have usb drive mounted, but when I click on it, it is empty. on right click the properties, the disk space show 0. (there are files within the usb) what i have done is: 1) run CCleaner to repair the registry, restart and try, but still not working. 2) uninstall the drive in device manager, restart and try, but still not working. 3) tried the port that connects mouse and keyboard, but does not work. anyone who experienced these problems before please guide me. any suggestions or solutions would be greatly appreciated. Thanks, Tony

  Read the article

• Windows 7 keeps losing drive letters

  - by Dean Perry

  Windows 7 loses its drive letters and I have to keep manually assigning a drive letter everytime I plug in a hard drive, whether it's internal or external. The only way to get around it is to reinstall Windows 7 but the problem will come back after a few months. We are a PC repair company and plug in many drives during the say and it can be very frustrating having to keep assigning a drive letter every time a drive is plugged in. Windows Updates are turned off so it can't be that. Any reason why this would have happened?

  Read the article

• sharepoint 2007 access denied when accessing user profiles via ssp

  - by user22215

  Guys I have a really strange problem in regards to sharepoint mysites today I go into user profiles and properties in order to setup a property all of a sudden I get access denied. First off I know that I'm logged in with the correct account after the access denied I decided to click on personalization services and permissions I than get An unhandled exception occurred in the user interface.Exception Information: Cannot complete this action. I'm not seeing anything in the server application logs either. So have any of you guys seen this before is there some kind of way to grant a user account the manage profiles right permission using stsadm. BTW all other fucntions of the ssp are working fine so my question is if the user profiles and my sites of a ssp tanks how do you repair that portion of the ssp? BTW the user accounts that I'm using are site collection owners and also they have full control at the web application level. I actually ran across this interesting post but this does not really help my problem. http://blog.tylerholmes.com/2008/09/access-denied-for-site-collection.html

  Read the article

• harddrive problem (usb external)

  - by masfenix

  Hey guys I am using a Maxtor One Touch 3 given to my by my uncle. It is connected through USB2.0 When I plug it in, XP installs it and says "the device is ready to use". But it dosnt show up on my computer. It dosn't even show up in disk mangement. I then install Acronis Disk Director (which detects it) but marks it as offline. if i try to change it to online, nothing happens. (actually the lights on the HD blink - meaning communication and goes back into offline mode). The lights on the HD return to a solid which mean "working properly". Here is a screenshot: Is there any way to extract the data off the drive? is the drive corrupt? sitll useable? edit: DISKPART screenshot: edit2: I ran Seagate diagnostic tool and this came up: Long Generic - Started 9/10/2010 6:44:36 PM Bad LBA: 0 Unable to repair Long Generic - FAIL 9/10/2010 6:46:41 PM SeaTools Test Code: 4

  Read the article

• There is a problem with the Office database

  - by RomanT

  After a TimeMachine restore; office 2011 is having kittens over permissions it would seem. Having attempted a 'repair' out of Disk Utility, am still seeing: 'there is a problem with the Office database' upon startup. After which Word/Excel work without issues. Outlook on the other hand won't even start. Given the obvious message here "You do not have write access to the Outlook application folder" - where is the DB located to check?! Ideas ? Thank you

  Read the article

• How to slave a 3.5" 500gb sata external hdd(Western Digital) to my dell Inspiron laptop

  - by AJ HDD

  i have a 3.5" western digital my book 500gb external hdd....i gave it to a friend of mine and he broke the usb port in it...i went to a nearby comp repair shop and had him solder the thing...it didnt detect when i plugged it in my dell inspiron laptop........i recently saw about the 3.5" sata to usb enclosure, so i went to check it....strangely when its placed in the enclosure, its not detecting in windows...also when it was put as secondary(im guessing slave) to the shop fellow's desktop it shows up in the bios and starting, but then again doesnt show in windows 7, and the guy told me i need to data recovery to get teh data back p.s.the wd hdd doesnt have os, just data, soo my question is: can i slave the drive to my dell laptop and try to recover the data....if so how? please i would really appreciate it...thanks in advance

  Read the article

• My WD Caviar Green SATA HDD cannot be detected

  - by obhasha

  I have a WD 2TB Caviar Green SATA HDD. I used it as an external hard drive formatted to FAT32. The main purpose was to store my PS3 games. It worked fine and all of a sudden my PS3 stopped detecting it. I tried connecting it to my pc and the same result. I took it off from the enclosure and plugged it directly to my PC and used the BIOS setup. The BIOS setup detects my HDD but it says it's 0.0MB!!! I also tried the WD Data Lifeguard Diagnostic tool and it wasn't much of use because the drive is not picking up by windows at all. Is my HDD dead? Is it beyond repair?

  Read the article

• A raw dump from a corrupted large file

  - by Masoud M.

  I have a large .rar file inside partion D (Windows7/NTFS). It's corrupted due to bad sector (I think) and when I copy it to another place (External-HDD) the system freezes after 88% of progress. I even tried to copy it with my Ubuntu and same problem occurred. Also I tried chkdsk and it dosen't fix it. I think my last chance is dump that file with a tool which ignores bad sectors and create a raw copy of it. Then I will repair the file with rar tools. But I can not found a tool to raw dump a specific file. (In linux there is dd tool but it dumps all partition and I can not use it) So, Is somebody know a tool to do a raw dump from a file?

  Read the article

• How can I switch Linux running OS from disk to running from RAM without restarting?

  - by vfclists

  Is it possible to switch to running Linux from RAM or RAM disk after starting starting initially from disk? eg. You need to make an image of your hard disk, FTP it to a remote location, some time later you want the image back, so you start the system from disk as usual, restore the image you FTP'd from the remote location back into place. More like a CloneZilla backup and restore, without booting the server from CD or USB disk, but starting from the normal hard disk? Notes on environment I should have mentioned it earlier. It is a remotely hosted VM where I cannot boot into a recovery console mode or do a netinstall. It will always boot onto the same disk. Which means that if there is some serious corruption I can't repair it offline, which is why being able to ftp a previously saved backup into place is so important

  Read the article

• Microsoft Outlook 2007 - General Failure. The URL was: "<http:/something.com>". The parameter is incorrect

  - by Simon Peverett

  For the last two days, Outlook has decided it doesn't like URL's. Any email message that comes in containing an URL will show the following in an error dialogue message box when I click on the link: General Failure. The URL was: "http:/something.com/somewhere/". The parameter is incorrect If I copy the link into a browser, it works correctly. OS is Windows XP SP 3, Microsoft Office 2007 (Outlook), Internet Explorer 8 (also Chrome). I have, of course, Googled this and the two most popular solutions are: Solution 1: Add/Remove programs Set Program Access and Defaults Custom tab Make sure a default browser is selected Solution 2: Add/Remove Programs Select the MS Office 2007 item Click Change Click Repair I have tried both of these and I still get the problem. Has anyone else had this problem and solved it with a solution other than those listed above?

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• Specify next boot to be into safe mode/WinRE via commandline?

  - by TMRW

  As the title says.I would like a script that tells windows that the next boot should be into safe mode or atleast that the "F8" menu should be presented next boot.Booting into WinRE(Launch startup repair...) is problably even more un-doable.I looked over bcdedit options but did'nt see anything like this.I know msconfig has an option for safe boot but it's gui only. Currently if i wan't to boot into safe mode or launch WinRE then i have to forcefully restart my pc first for those options to be presented during boot(F8 does not bring up the safe mode option under normal conditions). Im using Windows 7 x64.

  Read the article

• Mac failing (failed?) hard drive - is all hope lost?

  - by Daniel

  It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >