Search Results

Search found 4141 results on 166 pages for 'router'.

Page 36/166 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• Flow of packets in network

  - by user58859

  I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

  Read the article

• How to do port forwarding in D-link Glb802c?

  - by Manish

  I have some questions about port forwarding on my D-Link Router GLB-802C. For example: My local machine's IP is 117.1.1.81 My router's IP is 117.1.1.1 My Public (Web) IP is 117.16.1.1 My questions are: What will be my Global Address 'To'? What will be my Global Address 'From'? In Destination Port "From" and "To" what do I select in the drop down list and port no for forwarding HTTP traffic (for my website)? In Local Port, what do I select in drop down list and port no?

  Read the article

• Two routers, one off-site, same ISP-assigned static IP. A recipe for conflict?

  - by boost

  This is the situation I've inherited: There are two routers, one off-site. Both are connected to the ISP. The ISP assigns both of them the same static IP (or so it seems). Presumably, the network problems we're having are related to the idea that you can't have two instances of the same IP. So we rang up the folk off-site and told them to turn off the router. Now everything's working okay here. How do I get around this? Get another static IP? Figure out how to get the router to ask for a dynamic IP (as we're not using the static IP for anything)?

  Read the article

• Why do most routers not include local DNS?

  - by user785194

  I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

  Read the article

• Setting up Mac VPN on simple network with separate IPs

  - by Dave

  Hi there, We have a pretty simple network configuration. A typical ASDL line with two extra IP addresses. We have a basic home network router Dlink DIR-655. We have two Mac OS X Snow Leopard Servers that we want to setup VPN on. The problem is that we can't change the ports which VPN works under ie. we can only setup port forwarding for UDP 500,1701,4500 to a single server. I'm wondering how we can cost effectively re-work our network so that we can take advantage of the separate IP addresses and have both VPNs working with the same router. Is that possible with our current hardware setup or do we need something more powerful? We're also toying with Mobile Access and wondering if that might be easier to setup. Expert help is greatly appreciated.

  Read the article

• How to do port forwarding in D-link Glb802c?

  - by Manish

  I have some questions about port forwarding on my D-Link Router GLB-802C. For example: My local machine's IP is 117.1.1.81 My router's IP is 117.1.1.1 My Public (Web) IP is 117.16.1.1 My questions are: What will be my Global Address 'To'? What will be my Global Address 'From'? In Destination Port "From" and "To" what do I select in the drop down list and port no for forwarding HTTP traffic (for my website)? In Local Port, what do I select in drop down list and port no?

  Read the article

• Multiple WAPs: Bandwidth, Frequency Considerations

  - by Pete Cresswell

  The router in my LAN closet does 2 and 5 GHz. In the kitchen, I have a single-band 2 GHz WAP, and in the garden shed I have another single-band 2 GHz WAP. All are set to Bandwidth = 40 MHz, Wireless Network Mode = N-Only. The kitchen WAP and the LAN closet router both come up with multiple bars on my smart phone from almost anywhere in the house. The garden shed WAP will register one bar... but only sometimes. The Questions: Are these things in danger of butting heads? Should I re-set them to Bandwidth = 20 MHz? Bandwidth = Auto? Are there any tools that I could use on an Android smart phone, iPod, or WiFi-enabled laptop to make my own analysis?

  Read the article

• Why does my webpage look different when I connect using different routers?! Does routers cache files?

  - by Ayyash

  Here is the case, I am working on a site from office and home, I recently updated the stylesheets and logged in the live site from office (using my same laptop I use all the time), and everything looks okay, I come home use my home internet connection to connect to the site using the SAME laptop, the styles are not updated! The thing is: this happens on ALL browsers, and after emptying the cache many times, and even after one month of work, and even if I have never opened the site before on that browser (as if my router has a cache of its own) Another thing: only one particular styles.css file seem to be hanging Extra info: I use the same IP for my home wireless router as that defined in the office, the usual 192.168.0.1

  Read the article

• Slow internet connection on Mac OS

  - by user984621

  At home, we have a router. From router goes the internet connection into the desktop PC (Windows 7) and Macbook Pro. The problem is, that on Mac OS is incredibly slow internet connection - is not possible to use the laptop for surfing on the internet. The same as for WiFi as for cable. On the PC with Windows 7 is working the internet connection properly. Is there any tool for testing, if on my Mac is a virus or just something, what slowing down the internet connection? THank you in advance.

  Read the article

• PCs with Wired Connection Keep Losing Internet Connectivity

  - by user717452

  I have a U-verse ATT DSL Internet at our church building. Recently, any computer that is plugged into the network via Ethernet keeps losing its internet connectivity. The setup is from the Modem to a Netgear Wireless Router, and from the router to 3 different computers. None of the laptops that use Wifi ever lose internet, just the wired ones, and I end up having to do ipconfig /release and /renew every day to get it back. One computer has Windows 7 and one has Windows XP. Any ideas as to what is going on with our network?

  Read the article

• Wireless Connection unstable with multiple devices connected

  - by KingIsulgard

  My wireless network works perfectly when only 1 device is connected. Super fast, full strength. But as soon as multiple devices are connected to the wireless network the connections become unstable (constantly losing connection with the internet, not the network itself). It's quite annoying. I have a Sitecom Wireless 300N XR Gigabit Router WL-306, which should be a decent router so I'm guessing there must be something wrong with my configuration. Does any of you know what might cause this? Thanks

  Read the article

• Slow WLAN file transfer between server and tablet

  - by user266985

  My file server is running Ubuntu 12.04 and I'm sharing files from it over samba. It is connected via gigabit ethernet. My desktop, running Windows 8.1, is also connected via gigabit ethernet. I can transfer files between the two and completely saturate that gigabit pipe. However, I just got a Surface Pro 2, and I'm trying to stream HD movies from my server to the device over WiFi. For some reason, I can't break much past 1.5MB/s transferring files over the network. I've tried streaming through XBMC and a standard file copy; no difference. To add the confusion, if I connect to my guest network and then use my VPN server (installed on the router) to access the file server, I get around 3.2MB/s. I've been running diagnostics to determine the root and I think I've found it but I have no idea what is causing it or how to fix it. Router: Asus RT-N66U Surface Pro 2 Network Card: Marvell Avastar 350N (Driver 19/09/2013 v14.69.24044.150) InSSIDer: Link Score: 100 Co-Channels: 0 Overlapping: 0 5GHz Network Channel: 48+44 iperf File Server as Server; Surface Pro 2 as Client - TCP Performance: Acceptable ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.90 port 5001 connected with 192.168.0.56 port 57367 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 10.1 MBytes 84.7 Mbits/sec [ 4] 1.0- 2.0 sec 10.4 MBytes 87.6 Mbits/sec [ 4] 2.0- 3.0 sec 10.6 MBytes 88.8 Mbits/sec [ 4] 3.0- 4.0 sec 10.7 MBytes 89.5 Mbits/sec [ 4] 4.0- 5.0 sec 10.1 MBytes 84.4 Mbits/sec [ 4] 5.0- 6.0 sec 10.2 MBytes 85.8 Mbits/sec [ 4] 6.0- 7.0 sec 7.04 MBytes 59.1 Mbits/sec [ 4] 7.0- 8.0 sec 10.8 MBytes 90.2 Mbits/sec [ 4] 8.0- 9.0 sec 10.6 MBytes 89.1 Mbits/sec [ 4] 9.0-10.0 sec 8.62 MBytes 72.3 Mbits/sec [ 4] 0.0-10.0 sec 99.2 MBytes 83.1 Mbits/sec iperf Surface Pro 2 as Server, File Server as Client Performance: Poor ------------------------------------------------------------ Client connecting to 192.168.0.56, TCP port 5001 TCP window size: 22.9 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.90 port 40233 connected with 192.168.0.56 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 3.0- 4.0 sec 1.25 MBytes 10.5 Mbits/sec [ 3] 4.0- 5.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 6.0- 7.0 sec 1.38 MBytes 11.5 Mbits/sec [ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 9.0-10.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 0.0-10.1 sec 15.0 MBytes 12.4 Mbits/sec For some reason, it gets capped and I haven't got a clue why. Any suggestions? Edit: My link speed is reported as 270Mbps by Windows. I'm less than two metres from the router with a clear line of sight.

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• What is the main reason for ADSL modem/routers dying?

  - by ldigas

  The other day my home ADSL modem/router (dwg 684t in this case) died. A guy from the telecom company came to my place and brought another one, but he also left this one. Now, I'm interested - it didn't fall, it wasn't electrocuted - but it just doesn't work. What could be the problem? Can it be fixed? Is it worth it (in which case I would have two which is always nice)? I'm not looking for a definite opinion, just your personal advice ... (although in the end I think I'm going to archive it in the "cylinder register") What are the usual problems that occur with them? In this case, I can connect to the router, I can see its settings, I just can't connect to the Internet. With the new one everything works. Weird.

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• Does connecting to the default host via public IP from within its subnet cause any issues?

  - by username

  I'm setting up a small office network with a single public IP (let's say it's 69.16.230.117). I've configured NAT on the router with incoming traffic forwarded to the server (say the server has a private IP of 192.168.0.2). Is it okay to configure the client machines on the same subnet to access the server via the router's public IP (69.16.230.117)? In practice it's never caused me problems, but I've heard, here and there, that it is a bad idea, and one should use the private IP (192.168.0.2). Does connecting to the default host via public IP from within its subnet cause any issues? Please refrain from writing "never! it breaks the intranet!" ;-)

  Read the article

• Internet connection resets (wifi), no device has wifi for moment

  - by Gizmo

  I have a few devices setup and I noticed this happens with both my old and new router (two different vendors&models) This happens occasionally, and I tried wireshark today and this cought my attention: No. Time Source Destination Protocol Length Info 69 6.464423000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.4? Tell 0.0.0.0 73 7.451146000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 85 9.450443000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 91 10.521000000 LiteonTe_59:65:94 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 93 10.860953000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 97 11.099463000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 where 192.168.2.254 is the gateway/router, 192.168.2.1 my laptop ip and 192.168.2.4 my sisters laptop.. what's happening here?

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• Is there a way for me to test my [closed]

  - by Jimi

  I have a home network with a cheap-o little router with a development server and a few devices hooked up to it. I am finding that backups of my server are taking FOREVER (a week for 60gb) running backups renders my internet connection useless from any other box int he house. I have maxed out the pipe to my house from the ISP (10down, 3up), but is there a way for me to test and see if my router is bottlenecking anything? I feel like 60gb backups shouldn't take this long so any help would be great!

  Read the article

• 2 RJ45 connectors on a one WAN cable

  - by mr_stavo

  Hello, I encountered strange setup on a network at company where I do some work. They have internet connection from small ISP located in the same building, all I see is one CAT5 cable with 2 RJ45 connectors. One is going to WAN port on the router and another into LAN port on the same router. This is the only way for internet connection to work. I tried to connect my laptop to one of the RJ45 but it won't work. Now, what is the purpose for such setup?

  Read the article

• TCP and fair bandwidth sharing

  - by lxgr

  The congestion control algorithm(s) of TCP seem to distribute the available bandwidth fairly between individual TCP flows. Is there some way to enable (or more precisely, enforce) fair bandwidth sharing on a per-host instead of a per-flow basis on a router? There should not be an (easy) way for a user to gain a disproportional bandwidth share by using multiple concurrent TCP flows (the way some download managers and most P2P clients do). I'm currently running a DD-WRT router to share a residential DSL line, and currently it's possible to (inadvertently or maliciously) hog most of the bandwidth by using multiple concurrent connections, which affecty VoIP conversations badly. I've played with the QoS settings a bit, but I'm not sure how to enable fair bandwidth sharing on a per-IP basis (per-service is not an option, as most of the flows are HTTP).

  Read the article

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• Router and Switch VLAN Configuration for Isolated Network

  - by Ben

  I haven't worked with VLANs much in the past and I was hoping if I could get a good explanation of what I need to setup for this to work. I have a Netgear WNR2000v2 router and a Netgear GS108T smart switch currently in my network. The fourth port on the router connects to port one on the switch. I would like to be able to isolated port 8 on the switch for use as a "guest port" when I bring home malware infested PCs for repair. I figured the VLAN capabilities of the GS108T would be able to do this for me, but I think I have a misunderstanding of how the VLAN actually works. Port 8 needs internet access but should not be able to communicate with the rest of the PCs on the home network. The subnet for the home network is 192.168.1.0/24 and I would like the guest PC to have A) 192.168.1.64 or B) 192.168.2.2. I am reading a lot of stuff about port trunking and VLAN membership, but I am confused as to which setup needs to be in place to make this work. Any help is greatly appreciated! Let me know if there is more information I need to provide. Definitely looking to learn something from this project. Thanks!

  Read the article

• New router messed up server 2003 setup...

  - by Aceth

  Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >