Search Results

Search found 4141 results on 166 pages for 'router'.

Page 39/166 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Windows 7 computer apparently connected to working wireless network but can't access router page or internet

  - by Hemmer

  I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

  Read the article

• Zend hostname route doesn't match when it has child routes

  - by talisker

  I am implementing an Admin module, which contains the following routes: 'router' => array( 'routes' => array( 'admin' => array( 'type' => 'Zend\Mvc\Router\Http\Hostname', 'options' => array( 'route' => ':subdomain.mydomain.local', 'constraints' => array( 'subdomain' => 'admin', ), 'defaults' => array( 'module' => '__NAMESPACE__', 'controller' => 'Admin\Controller\Index', 'action' => 'index', ), ), 'priority' => 9000, 'may_terminate' => true, 'child_routes' => array( 'users' => array( 'type' => 'Zend\Mvc\Router\Http\Literal', 'options' => array( 'route' => '/users', 'defaults' => array( 'module' => '__NAMESPACE__', 'controller' => 'Admin\Controller\Users', 'action' => 'index', ), ), ), ) ), ), ), And this is the home route configuration: 'home' => array( 'type' => 'Zend\Mvc\Router\Http\Literal', 'options' => array( 'route' => '/', 'defaults' => array( 'controller' => 'Application\Controller\Index', 'action' => 'index', ), ), ), When I try to access to http://admin.mydomain.com, the route match always with the homeroute, but if I remove all the child routes from the admin route, the behavior is correct and a http://admin.mydomain.com matches with the adminroute. Any idea?

  Read the article

• Frequently getting booted from Securemote VPN-1 Connection

  - by Nick L.

  I connect to my office's network remotely through the Checkpoint SecuRemote E75 (R75) VPN application, but recently it's been causing me a lot of issues when connecting from home. I connect through a WRT54GL router running DD-WRT v24 firmware, so I have no clue if that affects anything. I took a dump of the logs for Checkpoint and here are the messages that populate when I get booted but I have no clue how to decipher them and my IT department is completely clueless in terms of resolving the situation. I'm thinking the router is blocking the keep alive connection or something along those lines, but I have no idea how to fix the problem. [ 2388 2932][30 Aug 22:47:49][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:50][TR_EVENTS] TR_EVENTS::Raise: Running registered cb... [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInfSendAsynchronic: __start__ 22:47:50.606 [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInf::TrComInfSendAsynchronic: Acquiring mutex [ 2388 2932][30 Aug 22:47:50][messaging] messaging::send_all: Sending Message {{ 2 }} , len 185 [ 2388 2932][30 Aug 22:47:50][tcpserver] TcpMultiPipe::pipe_if_send: Message (193 bytes) written successfully to socket 0x224 [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInf::TrComInfSendAsynchronic: Released mutex [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInfSendAsynchronic: __end__ 22:47:50.606. Total time - 0 milliseconds [ 2388 2932][30 Aug 22:47:50][TR_SRV2CL] TR_SRV2CL::SendNotification: Successfully sent notification of type TR_NOTIFICATION_TRAFFIC_IDLE [ 2388 2932][30 Aug 22:47:50][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:50][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:50][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:50][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:51][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:51][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:51][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:51][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: Called with ctrl_code 14 [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: System got SERVICE_CONTROL_SESSIONCHANGE message event type 4 session 2 [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: Console/remote disconnect has occured in session 2 [ 2388 2932][30 Aug 22:47:52][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:52][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:52][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:52][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEnum: Returning connection at position 1 [ 2388 2932][30 Aug 22:47:52][TR_EVENTS] TR_EVENTS::Raise: Running registered cb... [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventMainHandler: no gw handle [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventMainHandler: Current connection state is TR_CONN_STATE_CONNECTED. Receiving event of type CONN_EVENT_SYSTEM_SESSION_LOGOFF. Connection handle = 1. System state: TR_SYSTEM_STATE_RUNNING [ 2388 2932][30 Aug 22:47:52][CONFIG_MANAGER] suspend_tunnel_while_locked return value false, because it is Default variable. Scope: site 12.43.159.10, gw NULL ,user USER [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventConnectedHandler: no gw handle [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventConnectedHandler: receive session logoff event while connected. cancelling connection Thanks all. :)

  Read the article

• DD-WRT/openwrt question (TP-Link WR1043N)

  - by Shiki

  Can I squeeze more speed out of my router (when it comes to USB attached storage device on it) with open/DD wrt? (Sorry I don't really know such firmwares.) (Guess it works with ntfs-3g? I don't know.) Feel free to make this a real question. Basically the question: Does the change worth it in the terms of speed?

  Read the article

• Blocking ports in Airport Express

  - by gok

  I want to block torrent and other file sharing apps from Airport Express. How could I achieve this? I am not asking the port numbers. It's so sad that Airport Express is a very closed system. I miss my old Alcatel router in which every setting was possible.

  Read the article

• DI-524UP will become deadly slow when downloading torrents

  - by abolotnov

  I have a DI-524UP router that shares internet to two notebooks at home via wireless and a desktop via wired collection. It will become barely available/pingable via wireless when I download torrents on a desktop computer. Even when I limit download speed to 20% or less of available bandwidth - it must be something else, not the speed that causes the issue. I've tried limiting number of active connections and stuff but it will still not cure. Is there anything I can do about this?

  Read the article

• How can I edit/tweak Tomato firmware?

  - by HardwareMuch

  How do other people tweak or edit Tomato firmware? I'm interested in this because I do not need QoS. I have another router that does not have as much RAM and I want to have a micro Tomato firmware. I know there is DD-WRT micro but I like Tomato much more. What programming language is used in making Tomato firmware?

  Read the article

• Why do Ping and Dig provide different IP address than nslookup?

  - by user1032531

  When pinging my domain name which points to my home public IP from two different servers on my LAN, it shows them pinging different IP. Further investigation shows dig and nslookup providing different results. See below. A little history. My IP used to be 11.22.33.444 and is hosted by Comcast. I changed routers, and it somehow got changed to 55.66.77.888. I've since updated my 1and1 domain name to point to the 55.66.77.888. desktop is a basic server, runs the web server, and connects wirelessly to my LAN. laptop is a GUI and connected via CAT5. Both operate Centos6.4. My old router was a D-Link, and used their "Virtual Server" feature to pass port 80 to desktop. My new router is a Linksys, and I use their "Port Forwarding" feature to pass port 80 to desktop (however, I haven't gotten this part working yet). What is going on??? Why the different IPs? Obviously, it most somehow be stored on the server, but why does the actual machine even know the public IP since it is on a LAN? How do I purge the old IP? [root@desktop etc]# dig +short myDomain.com 11.22.33.444 [root@desktop etc]# nslookup www.myDomain.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@desktop etc]# dig myDomain.com ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 <<>> myDomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 13822 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myDomain.com. IN A ;; ANSWER SECTION: myDomain.com. 16031 IN A 11.22.33.444 ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Oct 21 04:36:52 2013 ;; MSG SIZE rcvd: 44 [root@desktop etc]# [root@laptop ~]# dig +short myDomain.com 55.66.77.888 [root@laptop ~]# nslookup www.myDomain.com Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@laptop ~]#

  Read the article

• Zyxel P-320W: How to connect to my web server using public IP

  - by hvtuananh

  My company's router is Zyxel P-320W and I have a public static IP. I registered a few domains name and point to this IP address. I already setup Virtual Hosts and configured port-forwarding to my internal server and it works well. I can connect to all domains from outside The problem is I cannot connect to my domains from inside One workaround way is modify hosts file to add internal IP for those domains, but my company have many computers and I don't want to setup all PC manually

  Read the article

• Can I set up multiple accounts on DD-WRT? [closed]

  - by Greg Ros

  Possible Duplicate: Can I set up multiple accounts on DD-WRT? I want to set up multiple accounts on DD-WRT (accounts meaning, username-password pairs). Specifically, I want one to be used primarily for remote web management (though there is no reason to restrict the account to such). Is this possible? If so, how do I go about it? I'm running: Router Model TP-Link TL-WR1043ND Firmware Version DD-WRT v24-sp2 (08/07/10) std - build 14896

  Read the article

• Streaming Netflix through Wifi kills all other devices

  - by maleki

  I have a "Belkin N150" Router. My current setup is wired connection to my personal tv and xbox with wireless going to the Wii and Bedroom laptop. Anytime I try streaming Netflix Instant Queue on the Wii, every other device has problems. The Wii works fine but everything else's connection is destroyed. Streaming through the Xbox doesn't create any issues for other devices. What kind of issue is occurring and how can I fix it?

  Read the article

• Cisco IOS rewrite http url

  - by ensnare

  Is there a way that I can configure my router to rewrite http requests? So for example, if: http://www.example.com/porn.gif is being accessed, it'll be re-written as: http://172.16.0.1/denied.gif But transparently returned to the client? Thank you.

  Read the article

• What decent small-office level routers are there

  - by Glenn Slaven

  So let's say I have a network of less than 20 computers including a server that needs to be accessed externally. What router/firewall solutions would you recommend? It can be either hardware or software and would need to be able to do NAT Firewall DMZ Native VPN if possible Some form of network bandwidth monitoring Update: I've accepted the answer I liked but this question probably doesn't have a definitive answer, it would depend on your requirements. Please leave more suggestions with an explanation as to why it works well in your situation.

  Read the article

• Ubuntu box static routing problem

  - by Rafael

  Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

  Read the article

• System for public internet access

  - by Pydev UA

  I'm looking for solution for a public wifi spot.. I want that all people who connect to our wifi network should be redirected to special website(after they open any internet page) where they should reed and agree with our terms of services(by clicking a button). After that they can open any internet page. I have a router and a linux box with site(with agreement page ready), so I'm looking for some software/or hardware solution for this, preferable open-source.

  Read the article

• IP Address Alias

  - by DanSpd

  Hello, I have a computer behind router with IP 192.168.0.166. I would like to know if it possible to mask real WAN IP to it. So in the end it would be visible as WAN IP but actually not.

  Read the article

• Malicious program changing my DNSs

  - by julio.alegria

  Some weeks ago I started having problems with my internet connection, it was extremely slow and suddently some websites (specifically gmail, facebook, youtube and twitter) started failing to connect, while the rest connect normally. Some days after, those same websites started showing me a message in portuguese: "Nova atualização disponível" whenever I tried to connect and a .exe file started downloading ("internet_update.exe" or something like that). That's when I freaked out! It was definitely a virus or something like that, but it was really weird because I never had a problem like that (I run Linux). So I turned on my old PC (running Windows XP) and it turned out it had the same problem! the same message was showed whenever I tried to connect one of those specific websites, while the rest loaded without problems. Even in my Android smarthphone the same message was showed. So it was obvious that the problem was not in a particular machine but in the router itself. So I started googling and I found some information, unfortunately I only found some in spanish, so I will make you a short summary: It is a new banking trojan developed specifically to infect and collect information from Brasilian banks. Apparently now it has expanded to Argentina and Peru. So how does it work? It spreads through social networks (videos, links, ...) and then it "takes control" of your internet connection by changing the values of your DNSs. More specifically, it changes the Primary DNS to one of this IPs: 108.170.13.38, 66.7.216.122 or 63.143.43.154 and the Secondary DNS to 8.8.8.8, this secondary DNS is actually the Google Public DNS, and it is configured this way so that your internet connection continue working properly and the user does not notice anything. The important part here is that because no download or install has been made in your machine, no antivirus will notice any change. After your DNSs have been changed, the trojan controls every single website you connect to and this way they steal your bank information. So after reading about this I accesed to my router and I restored my Primary and Secondary DNSs to their proper values, but one day after I had the same problem again. This is actually a 50% warning post - 50% help me! post. So, here comes the question: Is there any possible way to prevent my DNSs of being changed?

  Read the article

• SSH doesn't work in my LAN !!

  - by xrobot

  I am trying to connect to my webserver via ssh but I can't. When I insert the password nothing happens . This is what I see: # ssh [email protected] [email protected]'s password: . I have tryed with a wifi connection of my friend and it does work !! So is it a router problem ? What I have to do ? I ran ssh in debug mode: http://pastebin.com/2sWHMHSW Please help :(

  Read the article

• Bridging wlan0 to eth0

  - by user46127

  On arch Linux, I would like to mainly have eth0 (connected to bridged router) share the connection recieved from wlan0, Ive read tutorials but I'm not command sabby as other users are and don't completely understand. I would appreciate some help! Ty!

  Read the article

• Which linux-based firewall?

  - by Atlas

  We are looking to replace our current aging firewall/router with a new one. We would prefer it to be free/opensource if possible. Our minimum requirements would be: 1) Site-to-site VPN 2) Web URL/IP filtering 3) 2 WAN connections with load-balancing 4) Easy-to-use web inferface Any suggestions? and why you chose yours.

  Read the article

• Comcast SMC Port Forwarding Issue

  - by Zach Fedora

  I have a Comcast SMCD3G modem/router and I've been having issues getting the port to forward - When I check an online "open-port-checker" it says the port is forwarded/they can see the port on my IP. (1 Static IP is assigned to the modem) But when I try to access port 80 for example on a browser, it times out. Also when I try to remote desktop to the server (Windows Server 2008 R2) it doesn't work, yet canyouseeme.org says it is open. Any ideas as to what the problem could be?

  Read the article

• linksys WRT350N dd-wrt: how can i give upload priority to slingbox ?

  - by ufk

  Hi. i have the router WRT350N by Linksys I've installed dd-wrt v2.4 sp1 on it how can i configure it to give upload priority to slingbox ? The Slingbox is a TV streaming device that enables users to remotely view their home's cable. it seems that slingbox streams to amazon ec2 servers and from there to the client so i can't really give priority based on ip-address.

  Read the article

• juniper j2300 console connection?

  - by Aceth

  I've been given a Juniper Networks J2300 router, but I've never used a juniper device before and no idea where to begin on how to connect to the console of the device. I have a serial to RJ45 cable but not sure on how to connect to the device. Do I use specific software or just use something like minicom (linux hyperterminal alternative)? I've had a look on the juniper website and couldn't find anything :( Any help would be truly appreciated, cheers

  Read the article

• Using dynamic dns updater as Windows service

  - by Sami-L

  Currently I am using a dynamic dns updater software on Windows, but to keep it updating I have not to close it, also the software is not able to run at backgoud, I searched on google but the answer became complicated since there are many details to pay attention to, free, not free, installed on machine, configured on router, trusted, not trusted ... So please help me find a trusted free dns updater for Windows which can run as service, and maybe which can send email when update fails.

  Read the article

• Are there any routers supporting client-side VPN?

  - by Andreas Hagen

  What I'm asking for is basically what the title says. I need a router that can forward all the data-traffic it receives through a VPN tunnel. Have Google'd a little but I can't seam to find a topic which the links to potential products still are active. The parameters to the specific VPN it is going to be used with is as follows: Sorry it is in Norwegian, but you should be able recognize the relevant parameters like encryption and such.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >