Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 36/247 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• HP PAVILION NOTEBOOK PC DV6880 Blue Screen

  - by NaV

  Environment : Win-Vista 64 BIT Graphics Processor / Vendor NVIDIA GeForce 8400M GS Video Memory 256 MB Total Available Graphics Memory 1535 MB What happens is, i can use the laptop in "basic theme" ONLY, the moment i enable any aero theme, the screen tears up, discoloration appears & then laptop freezes. Sometimes its reboot itself with Blue Screen shows up the gfx card error. Any way around, highly appreciated.

  Read the article

• Radeon X1300 acceleration

  - by user30966

  Hello, I've just bought a Samsung XL2370 with a native resolution of 1920x1080. Should a Radeon X1300 be capable of shifting around windows on a screen that size? Because maximising and minimising windows, scrolling in Firefox and VS2008 seems very slow and jerky. Does the Radeon X1300 have any hardware accelearation? My old display was only 1028x768 and I never noticed any problems. Maybe is it time to buy a new graphics card? Thanks, AJ

  Read the article

• 3 Monitors to a single pc

  - by Rogue

  First of all which graphics cards support 3 monitors? Is it possible to buy a graphics card which has 2 outputs and use the onboard (motherboard) graphics output for the third monitor? (as far as I know you have to toggle between onboard or external graphics usage in the BIOS)

  Read the article

• Write-error on swap-device, Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

  - by Jan

  My root server at 1&1 was unresponsive on HTTP and SSH, so I logged into the serial console . It flooded my connection with endless error messages like quoted below. I initiated a reboot and now everything seems to work properly. After googling, I installed smartctl and ran a short self test, which told me the device was healthy. Is this likely a disk failure soon to happen or could it be just some program going wild? I assume, the swap device could also grow full when huge amounts of memory get consumed by a buggy program? How can I find out for sure? The sever was already unresponsive a week ago when I just restarted it without proper investigation. The server is running on CentOS. Write-error on swap-device (8:16:8351055) Write-error on swap-device (8:16:8351063) Write-error on swap-device (8:16:8351071) Write-error on swap-device (8:16:8351079) Write-error on swap-device (8:16:8351087) Write-error on swap-device (8:16:8351095) Write-error on swap-device (8:16:8351103) Write-error on swap-device (8:16:8351111) Write-error on swap-device (8:16:8351119) Write-error on swap-device (8:16:8351127) Write-error on swap-device (8:16:8351135) Write-error on swap-device (8:16:8351143) Write-error on swap-device (8:16:8351151) Write-error on swap-device (8:16:8351159) Write-error on swap-device (8:16:8351167) Write-error on swap-device (8:16:8351175) Write-error on swap-device (8:16:8351183) Write-error on swap-device (8:16:8351191) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 00 ef 00 00 08 00 end_request: I/O error, dev sdb, sector 10223855 Write-error on swap-device (8:16:10223863) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 0e 97 00 00 10 00 end_request: I/O error, dev sdb, sector 10227351 Write-error on swap-device (8:16:10227359) Write-error on swap-device (8:16:10227367) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c b0 1f 00 00 10 00 end_request: I/O error, dev sdb, sector 10268703 Write-error on swap-device (8:16:10268711) Write-error on swap-device (8:16:10268719) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a0 84 7f 00 00 08 00 end_request: I/O error, dev sdb, sector 10519679 Write-error on swap-device (8:16:10519687) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a7 26 af 00 04 00 00 end_request: I/O error, dev sdb, sector 10954415 Write-error on swap-device (8:16:10954423) Write-error on swap-device (8:16:10954431) Write-error on swap-device (8:16:10954439) Write-error on swap-device (8:16:10954447) Write-error on swap-device (8:16:10954455) Write-error on swap-device (8:16:10954463) Write-error on swap-device (8:16:10954471) Write-error on swap-device (8:16:10954479) Write-error on swap-device (8:16:10954487) Write-error on swap-device (8:16:10954495) Write-error on swap-device (8:16:10954503) Write-error on swap-device (8:16:10954511) Write-error on swap-device (8:16:10954519) Write-error on swap-device (8:16:10954527) Write-error on swap-device (8:16:10954535) Write-error on swap-device (8:16:10954543) Write-error on swap-device (8:16:10954551) Write-error on swap-device (8:16:10954559) Write-error on swap-device (8:16:10954567) Write-error on swap-device (8:16:10954575) Write-error on swap-device (8:16:10954583) Write-error on swap-device (8:16:10954591) Write-error on swap-device (8:16:10954599) Write-error on swap-device (8:16:10954607) Write-error on swap-device (8:16:10954615) Write-error on swap-device (8:16:10954623) Write-error on swap-device (8:16:10954631) Write-error on swap-device (8:16:10954639) Write-error on swap-device (8:16:10954647) Write-error on swap-device (8:16:10954655) Write-error on swap-device (8:16:10954663) Write-error on swap-device (8:16:10954671) Write-error on swap-device (8:16:10954679) Write-error on swap-device (8:16:10954687) Write-error on swap-device (8:16:10954695) Write-error on swap-device (8:16:10954703) Write-error on swap-device (8:16:10954711) Write-error on swap-device (8:16:10954719) Write-error on swap-device (8:16:10954727) Write-error on swap-device (8:16:10954735) Write-error on swap-device (8:16:10954743) Write-error on swap-device (8:16:10954751) Write-error on swap-device (8:16:10954759) Write-error on swap-device (8:16:10954767) Write-error on swap-device (8:16:10954775) Write-error on swap-device (8:16:10954783) Write-error on swap-device (8:16:10954791) Write-error on swap-device (8:16:10954799) Write-error on swap-device (8:16:10954807) Write-error on swap-device (8:16:10954815) Write-error on swap-device (8:16:10954823) Write-error on swap-device (8:16:10954831) Write-error on swap-device (8:16:10954839) Write-error on swap-device (8:16:10954847) Write-error on swap-device (8:16:10954855) Write-error on swap-device (8:16:10954863) Write-error on swap-device (8:16:10954871) Write-error on swap-device (8:16:10954879) Write-error on swap-device (8:16:10954887) Write-error on swap-device (8:16:10954895) Write-error on swap-device (8:16:10954903) Write-error on swap-device (8:16:10954911) Write-error on swap-device (8:16:10954919) Write-error on swap-device (8:16:10954927) Write-error on swap-device (8:16:10954935) Write-error on swap-device (8:16:10954943) Write-error on swap-device (8:16:10954951) Write-error on swap-device (8:16:10954959) Write-error on swap-device (8:16:10954967) Write-error on swap-device (8:16:10954975) Write-error on swap-device (8:16:10954983) Write-error on swap-device (8:16:10954991) Write-error on swap-device (8:16:10954999) Write-error on swap-device (8:16:10955007) Write-error on swap-device (8:16:10955015) Write-error on swap-device (8:16:10955023) Write-error on swap-device (8:16:10955031) Write-error on swap-device (8:16:10955039) Write-error on swap-device (8:16:10955047) Write-error on swap-device (8:16:10955055) Write-error on swap-device (8:16:10955063) Write-error on swap-device (8:16:10955071) Write-error on swap-device (8:16:10955079) Write-error on swap-device (8:16:10955087) Write-error on swap-device (8:16:10955095) Write-error on swap-device (8:16:10955103) Write-error on swap-device (8:16:10955111) Write-error on swap-device (8:16:10955119) Write-error on swap-device (8:16:10955127) Write-error on swap-device (8:16:10955135) Write-error on swap-device (8:16:10955143) Write-error on swap-device (8:16:10955151) Write-error on swap-device (8:16:10955159) Write-error on swap-device (8:16:10955167) Write-error on swap-device (8:16:10955175) Write-error on swap-device (8:16:10955183)

  Read the article

• wifi not recognized

  - by pumper

  I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

  Read the article

• Using the Onboard VGA output with a PCIe video card. Both nVidia

  - by sebikul

  I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

  Read the article

• How can I control which sound card Ubuntu uses for playback?

  - by GorillaSandwich

  I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

  Read the article

• How does the internet protocol handle network card numbers?

  - by Giorgio

  I know that data packets sent over the internet carry the source and destination IP address, so that the protocol can route the data to the correct destination and keep track of the source address of the packet. But what about the network card address? As far as I know, each network card has a unique identification number. Is this also transmitted with a TCP/IP packet? And when a packet is received at its destination, how is the IP address mapped to a network card number? In other words. On the sender part: does the sender store the sender network card number in the IP packets that it is sending? On the receiver part: which component maps the IP address to the receiver's network card number when a packet is received? E.g., in a home network, does the modem / router map the destination IP address of an incoming packet to a network card number and deliver the packet directly to that network card? A link to documentation on these topics would be of great help.

  Read the article

• 1>main.obj : error LNK2001: unresolved external symbol _D3D10CreateDeviceAndSwapChain@32

  - by numerical25

  having trouble getting my directx going I get the following error 1>Linking... 1>main.obj : error LNK2001: unresolved external symbol _D3D10CreateDeviceAndSwapChain@32 1>C:\Users\numerical25\Desktop\Intro ToDirectX\msdnTutorials\tutorial0\tutorial\Debug\tutorial.exe : fatal error LNK1120: 1 unresolved externals below is my code // include the basic windows header file #include <windows.h> #include <windowsx.h> #include <d3d10.h> ID3D10Device* g_pd3dDevice; IDXGISwapChain* g_pSwapChain; // the WindowProc function prototype LRESULT CALLBACK WindowProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam); bool InitDirect3D(HWND); // the entry point for any Windows program int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { // the handle for the window, filled by a function HWND hWnd; // this struct holds information for the window class WNDCLASSEX wc; // clear out the window class for use ZeroMemory(&wc, sizeof(WNDCLASSEX)); // fill in the struct with the needed information wc.cbSize = sizeof(WNDCLASSEX); wc.style = CS_HREDRAW | CS_VREDRAW; wc.lpfnWndProc = WindowProc; wc.hInstance = hInstance; wc.hCursor = LoadCursor(NULL, IDC_ARROW); wc.hbrBackground = (HBRUSH)COLOR_WINDOW; wc.lpszClassName = L"WindowClass1"; // register the window class RegisterClassEx(&wc); // create the window and use the result as the handle hWnd = CreateWindowEx(NULL, L"WindowClass1", // name of the window class L"Our First Windowed Program", // title of the window WS_OVERLAPPEDWINDOW, // window style 300, // x-position of the window 300, // y-position of the window 640, // width of the window 480, // height of the window NULL, // we have no parent window, NULL NULL, // we aren't using menus, NULL hInstance, // application handle NULL); // used with multiple windows, NULL // display the window on the screen ShowWindow(hWnd, nCmdShow); // enter the main loop: // this struct holds Windows event messages MSG msg; bool finished = InitDirect3D(hWnd); // Enter the infinite message loop while(TRUE) { // Check to see if any messages are waiting in the queue while(PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { // Translate the message and dispatch it to WindowProc() TranslateMessage(&msg); DispatchMessage(&msg); } // If the message is WM_QUIT, exit the while loop if(msg.message == WM_QUIT) break; // Run game code here // ... // ... }; } // this is the main message handler for the program LRESULT CALLBACK WindowProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam) { // sort through and find what code to run for the message given switch(message) { // this message is read when the window is closed case WM_DESTROY: { // close the application entirely PostQuitMessage(0); return 0; } break; } // Handle any messages the switch statement didn't return DefWindowProc (hWnd, message, wParam, lParam); } bool InitDirect3D(HWND g_hWnd) { DXGI_SWAP_CHAIN_DESC sd; ZeroMemory( &sd, sizeof(sd) ); sd.BufferCount = 1; sd.BufferDesc.Width = 640; sd.BufferDesc.Height = 480; sd.BufferDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; sd.BufferDesc.RefreshRate.Numerator = 60; sd.BufferDesc.RefreshRate.Denominator = 1; sd.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; sd.OutputWindow = g_hWnd; sd.SampleDesc.Count = 1; sd.SampleDesc.Quality = 0; sd.Windowed = TRUE; if( FAILED( D3D10CreateDeviceAndSwapChain( NULL, D3D10_DRIVER_TYPE_REFERENCE, NULL, 0, D3D10_SDK_VERSION, &sd, &g_pSwapChain, &g_pd3dDevice ) ) ) { return FALSE; } return TRUE; }

  Read the article

• Can you boot an Acer Aspire One from an SD card when no BIOS is available?

  - by henrijs

  Is it possible to boot the Acer Aspire One PC from an SD card? I have bricked an Aspire One, but it does not even start the BIOS. Aspire One have this issue and a BIOS update usually work and it helped me once in the past, but this time it's all over, and the BIOS update fails. It still reads the SD card with the magic Ctrl + Esc shortcut used to launch the BIOS update. Can I trick the computer into booting somehow using this shortcut?

  Read the article

• Determining a transaction fee before an order is processed

  - by Kenji Crosland

  When users make credit card transactions on my web app, I'd like to include the transaction fee on the confirmation page before the user makes the order. The thing is, there are different transaction fees for different cards. Is there a way to determine a transaction fee from the card number? I'm using Rails and ActiveMerchant, but I figure this question was applicable to other languages as well.

  Read the article

• Accepting Payment with local debit cards from foreign countries

  - by megatr0n

  Hi all. I have an ecommerce website and I am currently accepting payments from visa, master card and all the other major cards. However, one issue I am having is accepting payment from customers using local debit cards. Say someone from China doesn't have a major credit and he wants to use his local debit card, I want be able to accept payment from him as long as its legal. How do I go about this? Thanks.

  Read the article

• C++ pass enum as parameter

  - by Spencer

  If I have a simple class like this one for a card: class Card { public: enum Suit { CLUBS, DIAMONDS, HEARTS, SPADES }; Card(Suit suit); }; and I then want to create an instance of a card in another file how do I pass the enum? #include "Card.h" using namespace std; int main () { Suit suit = Card.CLUBS; Card card(suit); return 0; } error: 'Suit' was not declared in this scope I know this works: #include "Card.h" using namespace std; int main () { Card card(Card.CLUBS); return 0; } but how do I create a variable of type Suit in another file? Thanks, Spencer

  Read the article

• java.io.FileNotFoundException (Permission denied) When trying to write to the Android sdcard

  - by joefischer1

  I am trying to select an image file from the photo gallery and write to the sdcard. Below is the code that results in an exception. It appears to throw this exception when trying to create the FileOutputStream. I have the following line added to the manifest file nested inside the application element. I can't find a solution to the problem: <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" /> public boolean saveSelectedImage( Uri selectedImage, int imageGroup, int imageNumber ) { boolean exception = false; InputStream input = null; OutputStream output = null; if( externalStorageIsWritable() ) { try { ContentResolver content = ctx.getContentResolver(); input = content.openInputStream( selectedImage ); if(input != null) Log.v( CLASS_NAME, "Input Stream Opened successfully"); File outFile = null; File root = Environment.getExternalStorageDirectory( ); if(root == null) Log.v(CLASS_NAME, "FAILED TO RETRIEVE DIRECTORY"); else Log.v(CLASS_NAME, "ROOT DIRECTORY is:"+root.toString()); output = new FileOutputStream( root+"/Image"+ imageGroup + "_" + imageNumber + ".png" ); if(output != null) Log.e( CLASS_NAME, "Output Stream Opened successfully"); // output = new FileOutputStream // ("/sdcard/Image"+imageGroup+"_"+imageNumber+".png"); byte[] buffer = new byte[1000]; int bytesRead = 0; while ( ( bytesRead = input.read( buffer, 0, buffer.length ) ) >= 0 ) { output.write( buffer, 0, buffer.length ); } } catch ( Exception e ) { Log.e( CLASS_NAME, "Exception occurred while moving image: "); e.printStackTrace(); exception = true; } finally { // if(input != null)input.close(); // if(output != null)output.close(); // if (exception ) return false; } return true; } else return false; }

  Read the article

• Android: i need password example

  - by user1475122

  I have long been looking for a functioning example of a password, but I have not found. can someone help me? Explained more clearly: I have a TextField named password and I want that when it is written in 123 and press the button it goes to another activity if it is written in 123 if not it would inform the "wrong password!" and that the password is found file, which is / sdcard / Android / password.txt if you understood :) SORRY FOR MY BAD ENGLISH! I'm Finnish, and a young coder :) ( I hope someone may be understood :D )

  Read the article

• Image Rescan issue

  - by user1296361

  I am working on a code that could scan the specific folder, when picture is taken, I used the following code: Intent intent = new Intent(); intent.setType("image/*"); //intent.setAction(Intent.ACTION_GET_CONTENT); sendBroadcast(new Intent(Intent.ACTION_MEDIA_MOUNTED, Uri.parse("file://sdcard/ghost/" + Environment.getExternalStorageDirectory()))); startActivityForResult( Intent.createChooser(intent, "Select Picture"), 0); It works fine, but when I exit the app and start the app again, scan is not performed, what could be the issue? Help needed!!!

  Read the article

• Abnormal hangs and restarts Ubuntu 8.04

  - by jai-ho

  Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

  Read the article

• USB Flash not recognised by Windows and BIOS, but works fine in Linux

  - by bbalegere

  I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

  Read the article

• What is the correct PCI-X riser card for the IBM 3650 M2?

  - by Aditya

  I bought a IBM 3650 M2, and a riser card for that, Part Number 46M1074. This is the PCI-X riser card. Now, my admin team says that the card isn't fitting?? I'm not personally at the scene, but I've checked on the net, and this DOES seem to be the correct card for this server. Am I totally wrong??

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Does this laptop have high enough specifications for gaming? [closed]

  - by Grant

  Here's the laptop It wouldn't be hardcore gaming, mostly things like the new Deus Ex game, Mirror's Edge, Portal 2, etc... I need to replace my current, broken, laptop and I thought this would be a good opportunity to get to play some of these games. My current laptop is really only lacking in its graphics card. (Intel series 4 chipset) If this laptop isn't good enough, I would really appreciate suggestions. I won't be able to get a desktop, otherwise I would, and I can't spend more than $1000 dollars on my new laptop.

  Read the article

• HP Omni 27-1027c AIO...Upgradeable?

  - by Bobo

  I just bought an HP Omni 27 1057c from Sams Club. I like it a lot, but I want more performance. discovered that the integrated Intel HD 2500 graphics is almost useless for most games. I found a website that says it can be upgraded at http://www.pcmag.com/article2/0,2817,2398314,00.asp. The computers specs can be found at Sams Club website or at HP website HP Product Specs. So what do you think? Can I upgrade Motherboard and Video Card?

  Read the article

• Do the amount of CUDA cores matter for Sony Vegas

  - by Saif Bechan

  I am building a new PC, and I am wondering if I am making the right choices. The PC will mainly be used for video editing, and mainly in Sony Vegas. Now I have the choice of going with a video that that has more of less CUDO cores. To be precise I am choosing between a Ti and non-Ti version of an nVidea video card. Now I have read that sony vegas can partially use the CUDA cores to it's benefit, but not that much, and only if you use GPU acceleration. On the other hand I have heard it's better to leave GPU acceleration off as it will effect the quality of the output. Making it so that the CUDA cores actually don't make much of a difference after all.

  Read the article

• Can I use two of the same type of PCI Sound Cards in one computer?

  - by Eamon

  I recently purchased two Rocketfish 5.1 PCI Sound Cards from Best Buy. These are going to be used for audio production and radio broadcasting, so one card can handle live audio, the other can handle cue audio. After installing both cards, I get strange noises from the broadcasting program, and then the computer locks up solid. I have to hard restart to get it back up. This only happens when the two audio cards are installed on the computer. I have tried switching them around to different PCI slots, with the same result.

  Read the article

• How do I get the Dell 3007wfphc monitor to do other resolutions?

  - by Schwern

  I've borrowed a Dell 3007 WFP-HC monitor and it will only do 1280x800 and 2560x1600 resolutions crisply due to its lack of a real scaler. Every other resolution is fuzzy. 1280x800 is pixelated and I doubt my PC can play games at a reasonable frame rate at 2560x1600. Can I get something in between that looks good? I have a GeForce GTX 560 video card and Windows 7. Is it possible to get the GPU to render at a more reasonable resolution, say 1920x1200, and stretch it to the native 2560x1600 to make the monitor happy? I've been poking at the NVIDIA Control Panel but to no effect. Thank you.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >