Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 38/247 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Windows 7 ATI 6470M

  - by p_piorkowski

  I have some problems with my Dell Vostro 3350. I have to graphic card - Intel and ATI radeon 6470M. I have installed this driver. It's fresh installation of Windows 7. And my problem is that in device menager I can see in section graphic cards AMD Radeon HD 6490M and Intel(R) Graphics Family. Another thing is that I'm using two screens. And I want to use ATI readeon as default. At this moment I'm event not sure if ATI is working. Another strange thing is that when I run Catalyst Control Center in section Destkop Menagement i don't see nothing.

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Windows 7 treating my third monitor as an extension to my second rather than detecting it as a stand alone

  - by user331837

  I am trying to attach a third monitor to my PC, however I am coming across a rather strange issue. Windows screen resolution is still only showing that I have two monitors connected, but the second has been extended over both the second and third monitors. Basically, it shows as the main display being a normal size, and the secondary as being twice as long as normal. I have my main connected via a the display port, and the second and third are using two of the three mini HDMI ports my video card provides. How do I get windows to accept my third monitor the same as it does my second?

  Read the article

• After installing Windows 7, there're lines on the screen

  - by user22589

  Hi, I've just installed Windows 7 on my Dell machine. Everything works fine except that there are one or two lines on the screen. The line is so random and I am sure that it's now the monitor problem. The graphic card is NVidia GeForce 7600. I replaced the default driver with the driver from the manufacturer and it didn't help. When I change screen setting, the line goes away for a while and it comes back in different location. Sometimes an app window has the line and if I move the window the line follows with the window. What can I do to fix it? Thanks. Sam

  Read the article

• Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

  - by echo-flow

  I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

  Read the article

• New mainboard with 890GX chipset disables lightdm, even when using old graphics card instead of onboard graphics, startx works (Xubuntu 12.04)

  - by user99250

  I am trying to migrate an installed Xubuntu 12.04 to a new mainbaord with 890GX chipset. The Chipset has a built-in Radeon HD 4290 graphics. The system boots, but X won't start. The most suspicious message in Xorg.0.log is "ddxSigGiveUp: Closing log". When searching for this message, I found some answers like "remove your xorg.conf" (but there is none on my system). Or bug reports for fglrx (but that's not installed on my system). Or NVidia-related questions ... Interestingly, "startx" succeeds in opening a basic XFCE session. Then, I tried to disable the onboard graphics in the BIOS setup and use the old PCIe graphics card (Radeon HD 5450). No change. I don't think I can just blacklist a module, because the graphics card and the onboard graphics are covered by the same module. At the moment, use the free radeon drivers, not the restricted fglrx driver. If possible, I would like to stay on the free driver for two reasons: The fglrx driver from the ubuntu packages fails to build the kernel module. In past, I had bad experiences with the fglrx driver and changing screen config with RandR. When I connect the harddisk and the graphics card to my old mainboard, everything works again. This means, I have not screwed up my system configuration wile installing and removing the fglrx drivers. When I ordered this mainboard, I thought the 890GX is old enough to be supported and if not, I could still use my graphics card as backup solution. But without even the backup soluton, I'm screwed ... Any ideas ? Thanks and Regards, Kubuntu-Man (now switched to Xubuntu)

  Read the article

• How to know if a graphics card provides hardware rendering for wpf

  - by happyclicker

  I have to run a wpf-app in an environment that has all the same dell-pc's with an intel gma 3000 graphics chip (onbard, Q963/Q965). The app renders only with software rendering (Stated so by the RenderCapability.Tier-property (it says the rendering tier is 0!) and I also see this with Perforator). On all of this machines, DirectX 9c is installed and DXDiag states on many but not on all of this machines, that Direct-3d and Direct-Draw-acceleration is activated. I checked also the registry if the setup of these machines disabled wpf-hw rendering but that's also not the case. On one machine I also updated the video-driver and dx with no success. I found a lot of ressources that say, that directX must be installed and active, so that wpf does not use its own software renderer but uses the DirectX HW-Rendering. But on the above machines, DX9c is installed but there is no hw rendering. May it be that wpf uses dx-graphicscards but does the communication with the graphics card direct and not over dx? How can I find out if a specific graphics-chip has to support hardware rendering for wpf or not. The statement that the graphics card must support dx 9c seems not to be the only condition. The second question is, if wpf renders through dx, is this done through direct-3d or is direct-draw used. Is there any good documentation on this topic?

  Read the article

• Credit Card storage solution

  - by jtnire

  Hi Everyone, I'm developing a solution that is designed to store membership details, as well as credit card details. I'm trying to comply with PCI DSS as much as I can. Here is my design so far: PAN = Primary account number == long number on credit card Server A is a remote server. It stores all membership details (Names, Address etc..) and provides indivudal Key A's for each PAN stored Server B is a local server, and actually holds the encrypted PANs, as well as Key B, and does the decryption. To get a PAN, the client has to authenticate with BOTH servers, ask Server A for the respective Key A, then give Key A to server B, which will return the PAN to the client (provided authentication was sucessful). Server A will only ever encrypt Key A with Server B's public Key, as it will have it beforehand. Server B will probably have to send a salt first though, however I doin't think that has to be encrypted I havn't really thought about any implementation (i.e. coding) specifics yet regarding the above, however the solution is using Java's Cajo framework (wrapper for RMI) so that is how the servers will communicate with each other (Currently, membership details are transfered in this way). The reason why I want Server B to do the decryption, and not the client, is that I am afraid of decryption keys going into the client's RAM, even though it's probably just as bad on the server... Can anyone see anything wrong with the above design? It doesn't matter if the above has to be changed. Thanks jtnire

  Read the article

• HTML5 card game [closed]

  - by ChrisCa

  I created a card game in silverlight a year or so ago in order to learn a bit about Silverlight. I am now wanting to make a HTML5 version of the game in an effort to learn a little bit more about that. I am thinking I'd like to take advantage of stuff like Knockout.js and WebSockets and the canvas element. Now what I'm confused about is how to lay out the cards on the screen. With Silverlight I was able to make a "Hand" control, which was made up of two sub controls - the cards the player has in their hand and the ones they have on the table. And they in turn were made up of Card controls. Now I don't believe there is the concept on a User Control in javascript. So I am possibly thinking about this in entirely the wrong way. So my question is - how could I lay out some cards on the table and perhaps make reuse of something for each player? I have a client side JSON object called game, which contains an array of players. Each player has a hand which is made up of an array of in-hand cards and on-table cards. Ideally I would like to bind these to something using Knockout.js - but I don't know what I could bind to. Would I simply position images (of cards) on a canvas? Is there a way to make some kind of Hand object that each player could have and that I could bind to? Any advice? Or sample code you've seen elsewhere?

  Read the article

• ASP.NET 2.0 + Firefox/Safari - UI Issues?

  - by Tejaswi Yerukalapudi

  I'm developing on a system that was originally developed five years ago. I don't have access to the complete source code of the system, but it is completely driven by XML and runs on ASP.NET 2.0. This was originally written for IE6, but since Microsoft has officially decided to dump it, we moved to IE7. Some javascript is added on the client side, but nothing that changes the UI has been done. (We had to integrate a credit card reader into the system) This code is accessed primarily on tablet PCs running windows, but I'd like to persuade my company to use the iPad. [The tablet somehow costs around 3k$. I think selling a 3000$ device to a client when you have the iPad for 500$ is ridiculous.] Now, my problem is if we open it in any other browser (Tested it on safari / firefox), the UI is completely messed up with elements completely out of place. Doesn't ASP.NET generate HTML that runs on any browser? My second question is if there are any credit card readers available in the market that integrate with the iPad. I don't really care about the software part as it's taken care by our company, I just need it to read the card details and post it to the server. Thanks, Teja.

  Read the article

• Upgrading Ubuntu to 9.04 breaks ATI video card driver, VESA and ati/radeon drivers

  - by Neil

  I upgraded my Ubuntu 8.10 to 9.04, and it not only broke the ATI proprietary fglrx driver, but also the ability to use the VESA or open-source ati or radeon drivers. I have an ATI RV610 which is an ATI Radeon HD 2400 XT. I have Linux Kernel 2.6.27-14-generic and 2.6.28-13-generic. With fglrx, vesa, ati and radeon, the Xserver hangs the machine as soon as it starts by invoking X or startx, which is seen by observing that caps lock doesn't work. There's nothing useful in /var/log/Xorg.0.log, no errors at all. This is with either kernel. When I download a new proprietary driver from ATI, I install it successfully on kernel 2.6.27, and it doesn't hang when X starts up, but it just shows a blank screen and does nothing. I also can't CTRL+ALT+Backspace out of X at this point. In all the years I've used ATI's Linux drivers, this has happened almost every time I've upgraded my kernel, but it's been fixable with much effort. This time I'm really stuck. Does anyone know how to fix these problems?

  Read the article

• BSOD - probably video card prob

  - by Shimmy

  I'm receiving the following BSOD: I've tried installing the latest driver from nVidia (296.10), but it says "NVIDIA installer cannot continue", "The graphics driver could not find compatible graphics hardware.": I installed it manually at device manager, but problem still occurs. The problem does not happen in safe mode at all. Note: After restarting the computer when seeing this BSOD, the BIOS welcome screen is full of random black dots spread around: Any solutions? Update: I've tried disabling Aero by following this guide, but that didn't help.

  Read the article

• Atheros LAN card driver, Linux compiling problem

  - by Ali Qocayev

  I have installed openSUSE 11.4 to my new workstation. It says that there is Attansic ETHERNET controller on board. But no devices seen. I typed: lspci and it returned: atheros communications device 1083. I have downloaded drivers. I'm trying to compile the driver. But I get the error: **Makefile:94: Linux kernel source not configured - missing autoconf.h. Stop** But I see autoconf.h presents on my system. What should I do ?

  Read the article

• Bad Blocks Exist in Virtual Device PERC H700 Integrated

  - by neoX

  I have a DELL server with PERC H700 Integrated controller. I've made RAID5 with 12 harddrives and the virtual device is in Optimal state, but I receive such errors under linux: sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bc e0 00 00 01 00 00 00 end_request: I/O error, dev sda, sector 30640487648 But all disk are in Firmware state: Online, Spun Up. Also there is not a single ATA read or write error in any disk in the raid (I check them with smartctl -a -d sat+megaraid,N -H /dev/sda). The only strange thing is in the output in megacli: megacli -LDInfo -L0 -a0 ... Bad Blocks Exist: Yes How could there be bad blocks in a Virtual Drive, which is in optimal state and no disk is broken or even with a single error? I tried "Consistency Check", but it finished successfully and the errors are still in dmesg. Could Someone help me to figure it out what is wrong with my raid?

  Read the article

• Smart card / auditable access for rack KVM tray

  - by Mark Henderson

  Is there such a thing as a KVM Tray for a standard 19" rack whose use can be validated by a smartcard (or some other auditable authentication method)? It looks like we have a security requirement where just because users have a key to the rack doesn't mean they will be allowed to use the console inside the rack, and rather than just lock the console (and keep track of who has keys), we would prefer to be able to audit the actual user that was attached at the KVM. (It's worth mentioning that I'm aware of the Raritan devices, but they surely can't be the only ones) (If these things existed, I don't think half of the tratoirs that somehow manage to infiltrate CTU on the TV show 24 would ever get away with anything)

  Read the article

• Wild Card DNS setup problems

  - by Phil Jackson

  Hi, this is my firast time with dedicated servers and im having problem setting up a wildcard sub-domain. I previously tried * /-----/ 14400 /-----/ IN /-----/ A /-----/ (serverip) waited 30 hours and nothing. so i then tried * /-----/ 14400 /-----/ IN /-----/ CNAME /-----/ actvbiv.co.uk. waited another 30 hours, nothing Im now trying; *.actvbiz.co.uk /-----/ 14400 /-----/ IN /-----/ CNAME /-----/ actvbiv.co.uk. Am i doing this correctly? using WHM. Regards, Phil Jackson

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

• Eyefinity with lower power graphic card?

  - by terrani

  Hi, I am looking for a graphic that supports Eyefinity, but with lower power. What I mean by "lower power" is lower performance and lower power literally. I don't need performance and heat of ATI 5 Series, but I love their multi-monitor supports and price range. What options do I have?

  Read the article

• Cheapest dedicated PhysX card?

  - by davr

  Say I have a nice powerful ATI Radeon GPU but I would like to have PhysX support as well. What is the cheapest NVidia GPU I can buy to add on to my system that will support PhysX? (I already know about the driver hacks required to get both cards running at once)

  Read the article

• Using 2-port LSI 2308-8e card to control 24 SAS HDDs

  - by GregC

  I would like to rely on a RAID-on-chip solution to control 24 SAS hard drives in a direct-attached environment. How would you approach this to get best bandwidth given that I'd like to spend less than $10,000 on the interconnect. I've read that LSI 2308 chip can easily handle 8-drive SSD RAID6 in hardware. I'd like to harness its power to control 24 SAS hard drives over an expander in an external enclosure. Currently I use an Infortrend S24S-G2240 external enclosure. It provides its own controller and expander. I'd like to use LSI 2308 controller for RAID6 somehow instead of the mystery controller in the enclosure. P.S. I tried to create SAS-expander as a tag, but my rep on this site is low.

  Read the article

• Searching user throug wild card in Cisco Unified Communication manager

  - by Santhosha Kaldambe

  Hi, I am trying to search users using wildcards. For example if i give sam, i should get all users preceded by sam. In Cisco Unified call manager they have suggested to Enable "Allow wildcard" checkbox. But i am not able to find this check box and not able to search using wildcards. Any suggestions from CUCM experts?? Thanks in advance Santhosha K S

  Read the article

• Re-Initialize RAID-0 in software after card failure

  - by Ben

  I'm working on a Friend's WD MyBook "1TB" HDD that is not mounting. When I got in to it, I discovered that it is really 2 500GB HDD's set up as RAID-0. It appears that the drives themselves are fine, but that the logic board has failed. My questions is this: can I re-initialize the RAID-0 using software RAID so that I can recover the data to another drive? If so, how and which software RAID would be best (Preferably open source. any platform OK).

  Read the article

• Win 7 Netbook refuses to ping JetDirect card (all other PCs work)

  - by Luke Puplett

  I have an odd thing occuring here. From a Windows 7 netbook, I cannot ping an HP printer on the network, while all other machines (Win7/Vista) can. And the netbook can also ping everything else on the LAN. Example showing that the netbook can ping 192.168.3.4 but not 3.6. C:\Users\backdoor>ping w7ue1m Pinging w7ue1m.corp.biz.co.uk [192.168.3.4] with 32 bytes of data: Reply from 192.168.3.4: bytes=32 time=7ms TTL=128 Reply from 192.168.3.4: bytes=32 time=4ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Ping statistics for 192.168.3.4: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 3ms C:\Users\backdoor>ping uktnprint1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Ping statistics for 192.168.3.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),`enter code here` The IPCONFIG result for the netbook is fine. IPv4 Address. . . . . . . . . . . : 192.168.3.0 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Most unusual network thing I've seen in years. I must reiterate that only this netbook is having trouble pinging/printing. Thanks, Luke ** UPDATE ** Am now on a Vista box, and here's the IPCONFIG: IPv4 Address. . . . . . . . . . . : 192.168.3.3 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.6: bytes=32 time=2ms TTL=60 Firewall is off. I'll look into the chance of an IP conflict because it's the only thing I can think of - compare arp caches of each machine. Cheers!

  Read the article

• Upload of photos from cf card to pc is super slow

  - by Sharon

  I have a new custom built pc. It has 8B of RAM and was working like a dream. Suddenly it is super slow and taking hours to download photos that used to take just minutes. I notice that there is 8GB RAM but only 3,25GB usable. could this be the problem? If so how to I change it? I'm using Windows 7

  Read the article

• how to run an AFS file server on a specific ethernet card (in Debian)

  - by listboss

  I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >