Search Results

Search found 7755 results on 311 pages for 'usb cable'.

Page 36/311 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Copying large file from SD to HDD via USB failing on Ubuntu

  - by Kent Boogaart

  Hi, I'm attempting to copy some large files from my camera (Canon EOS 500D) to my laptop, which is running 64 bit Ubuntu 9.04. I am using USB to connect the two devices. For most files, it is simply a matter of control-C and control-V. I have done this successfully many times with both photos and small movies (eg. 180MB). However, when I attempt to do this with very large files (eg. 3GB), the copy seems to start with a lot of activity both on the camera and laptop, but after 10 minutes or so the camera is automatically unmounted and the copy fails to complete. I have read that this might be due to the device not mounting as a mass storage device, but I cannot see any obvious way for me to change this behavior. Can anyone offer any direction here? I'll get a USB card reader if necessary, but I'd prefer to be able to just plug my camera in. Thanks

  Read the article

• Install Server 2003 from USB

  - by stalkerh

  I need some way to boot my windows server 2003 install from a USB drive , any suggestions welcome.

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• Linux (lsusb) not showing String Descriptors of a USB device

  - by tzippy

  I have an embedded device that when plugged to a linux host, shows up with vid and pid that are not in the usb.ids file (proprietary IDs). However I provide String Descriptors that do show up when plugged into a Windows Host. But not on a Linux Host. lsusb -v shows only iManufacturer 3 iProduct 2 iSerial 1 But on the device side, when processing the setup requests, I see that the Strings are actually requested by the Host. By Windows and also the Linux Host. The USB Device Tree Viewwer under Windows shows this output: iManufacturer : 0x01 Language 0x0409 : "My Manufacturer" iProduct : 0x02 Language 0x0409 : "MyProduct" iSerialNumber : 0x03 Language 0x0409 : "My Serial" I feel that lsusb does not show all of the information. Is there a more informative tool?

  Read the article

• WD 1TB Passport Essential not working on some USB ports

  - by user143863

  I have a strange situation here. I got a new Toshiba P850/04P laptop, there are 4 USB 3.0 ports, 2 on the right and 2 on the left. When I plug my WD 1TB Passport Essential into the 2 ports on the left, the drive keeps disconnecting and then connecting again, on and off. Sometimes it works well for 1 hour and then disconnects and even shows the "please format your drive" message. What is odd is: this WD 1TB Passport Essential works perfectly on those 2 ports on the right side. It has been working fine on all other PCs and laptops. Another 500 GB WD passport can work with the USB ports on the left (the ones 1TB can not), also all other devices can work with all 4 ports. I am really confused! Does anyone know what the problem could be?

  Read the article

• Linux (Ubuntu) USB Auth

  - by themicahmachine

  I want to be able to authenticate with PAM using a USB drive with a file on it. I've read about how to do this with a PAM module that reads the specific USB hardware ID of a device, but if the device malfunctions or is lost, there would be no way to authenticate. I would prefer to use the method BitLocker uses, requiring a particular file to be found on the drive in order to authenticate. That way I can keep another drive in a secure location as a backup. Any other suggestions are welcome. I just want to require a higher level of security that just a password.

  Read the article

• How to fix a Corrupted USB

  - by Help

  My USB stick has suddenly stopped working. It's a Busbi 4GB. My USB used to be G:/ but as soon as I plugged it in, I used to get a pop up box showing that it was plugged in. Now, when I plug this in, it shows as I:/ and no pop up box appears. It shows in my computer as I:/ and when I click to open it says I:/ is not accessible the disk structure is corrupted and unreadable. I have tried to change the file name back to G:/ but nothing happened (this was under disk management). On disk management, it shows Volume as I:/ Layout simple Type Basic File system RAW status Healthy (Active,Primary partition) Capacity 3.42GB. I've tried right clicking properties then the tab tools and click error checking (this option will check the volume for errors). When I click "check now" it comes up with the disk check could not be performed because Windows cannot access the disk.

  Read the article

• A script so that you don't forget your usb drive on a public computer

  - by Ava Gailliot

  So I have a problem because I'm an idiot. I seem to always leave my usb drives in public computers at school and the like. I unmount them and log off leaving them still in the pc, and of course I then lose my information and my drive which can be costly. Is there a small script somewhere that I can install to my drive that prompts me to take out my usb stick when I log off of a computer? Since this is mostly for use with public computers I can't put anything on my drive that will later need some sort of admin permissions. I guess if all else fails I'll probably put my drive on a lanyard and keep it around my wrist. lol. Does anyone else have this problem?

  Read the article

• opening a GUID usb stick in windows 7

  - by altomic

  so I have a mac which I have files on. I put in a GUID formatted usb stick and dropped some files on to it. took the stick and plugged in to my netbook with win7. In Devices & Printers it shows up. It also appears in "safely remove hardware". no actual letter or device when i search for it in other ways. Question - how do I access the files of my GUID usb stick on my windows 7 netbook? thanks

  Read the article

• USB 3.0 Not Working

  - by senzen

  I bought an Asus A43E laptop which comes with one USB 3.0 port. In Windows 7 it was working just fine, but after Windows 8 has been installed the USB doesnt work anymore. When I insert any flash drive windows has no reaction. I have been trying to find a driver but I couldnt find one that fits. I know this port works cause I am able to boot windows throw a flash drive. It might be some driver missing. You guys have any idea how can I solve this?

  Read the article

• Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

  - by Estel

  A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

  Read the article

• A Dozen USB Chargers Analyzed; Or: Beware the Knockoffs

  - by Jason Fitzpatrick

  When it comes to buying a USB charger one is just as good as another so you might as well buy the cheapest one, right? This interesting and detailed analysis of name brand, off-brand, and counterfeit chargers will have you rethinking that stance. Ken Shirriff gathered up a dozen USB chargers including official Apple chargers, counterfeit Apple chargers, as well as offerings from Monoprice, Belkin, Motorola, and other companies. After putting them all through a battery of tests he gave them overall rankings based on nine different categories including power stability, power quality, and efficiency. The take away from his research? Quality varied widely between brands but when sticking with big companies like Apple or HP the chargers were all safe. The counterfeit chargers (like the $2 Apple iPad charger knock-off he tested) proved to be outright dangerous–several actually melted or caught fire in the course of the project. Hit up the link below for his detailed analysis including power output readings for the dozen chargers. A Dozen USB Chargers in the Lab [via O'Reilly Radar] 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

  Read the article

• Putting and configuring grub on an external drive

  - by HisDudeness

  I want to put a bunch of minor emergency operating systems (such as GParted Live, DSL, Puppy Linux and so on) on a partitioned USB pen drive, with a dedicated grub boot loader on it, which I want to start when I select the drive in the BIOS to boot. The problem is: when writing grub boot options I must tell where kernel and initial ram files are located, but the USB drive can have different letters depending on when I did plug it in, if some others external drive were mounted. So, how can I write appropriate options which automatically refer to the drive grub is installed on without having to specify absolute paths, which might change (I mean, like (hd1,msdos1) ot /dev/sdb1)? And, while we are at it, can I have grub working on a device without an operating system on it to which it can refer? I mean, I want to address the command sudo grub-install /dev/sdb from the LMDE system I'm on right now, but I won't have LMDE on my pen drive. Is that a problem? And installing grub on another device, will I keep the grub I have right now on my HDD?

  Read the article

• How to Create Shortcuts to Programs on USB Drives

  - by Lori Kaufman

  If you work on multiple computers, you probably use a USB drive to take your favorite portable software with you. Portable application suites like PortableApps.com, CodySafe, or Lupo PenSuite, each have a main menu providing access to the programs installed into the suite. However, there may be reasons why you need to create shortcuts to programs on your USB drive. You may be using a program that does not integrate into the suite’s main menu. Or, you may not be using an official portable application suite at all, and just placing portable software in a folder on your USB drive. Maybe you prefer using shortcuts on the root of the USB drive, like a portable desktop. Whatever your reason, you can’t just create a shortcut to an application on the USB drive and place it in the root of the drive. The shortcut will always refer to the full path of the application, including the drive letter. Different computers assign different drive letters to USB flash drives, so you would have to change the drive letter for your shortcuts when it changes. You can assign a static drive letter to the USB drive. However, if you would rather not do that, there is a way to create shortcuts to programs on a USB drive using relative paths. Because Windows does not support relative paths in shortcuts, we will show you how to create a “shortcut” on the root of a USB drive by creating a batch (.bat) file and converting it to an executable (.exe) file. What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

  Read the article

• I got my z-5 Logitech speakers to work, but whenever I restart, I have to reconfigure them

  - by The Bill

  This is the content of my alsa-base.conf file (for some reason, the entries preceded by # are bolded--anyway): autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-usb-audio index=0 options snd-hda-intel index=1 Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 options snd-usb-audio index=-2 options snd-usb-audio index=0 alias snd-card-0 snd-usb-audio alias snd-card-1 snd-hda-intel options snd-hda-intel index=1 I deleted a line that said something like "#Keep usb-audio from being loaded as first soundcard" and that made the speakers work for the first time (before this, they never showed up). I also added the last four lines. Anyway, what can I add to this so that I don't have to reconfigure them each time I restart? Currently, I have to open Sound Settings, then under the hardware tab, select Analog Stereo Output, and then unplug my USB speakers and plug them back in. This makes them pop up so that I can see them. Otherwise, it will not show my Z-5 speakers as a device that can be configured.

  Read the article

• Will the netinstall (minimal) work with a USB cellular modem?

  - by Z9iT

  Installing Ubuntu minimal is extremely easy when the system has a LAN card and connected to internet via Cable & Router... I Recently came across a situation where I needed to install Ubuntu Minimal on a system which wash not having a LAN card and cable internet anywhere around... The only access to the internet was through a USB Plug n Play Data-Card Modem. May anyone suggest something so that I may install Ubuntu Minimal using USB Modem as the only source of Internet, if it's possible at all?? (This relates to Ubuntu 12.04 in specific)

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• Fiber-Optic Cable Trick Brings Remote Triggering to Older Flashes

  - by Jason Fitzpatrick

  Many older flashes lack for a jack to input a sync cable and rely exclusively on a simple slave mode triggered by the primary flash. This hack uses a piece of scrap fiber optic cable to trigger the flash in bright conditions. Using a flash as an optical slave indoors isn’t much of a problem, but if you introduce bright light (such as outdoor lighting conditions), the ambient light can overpower the small on-camera flash and render the optical slave function useless. To overcome this, Marcell over at Fiber Strobe (a blog dedicated to cataloging experiments in incorporating fiber optics into photography) came up with a simple work around. By using some foam crafting materials and tape, he whipped up a simple mount for a strand of scrap fiber optic cable to connect between the on-camera flash and the sensor on the slave flash. Once attached it works exactly like as sync cable would, except it’s transmitting a pulse of light instead of a pulse of electricity. Hit up the link below for more pictures and a build guide. DIY Fiber Sync Cord [via DIY Photography] HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

  - by rzetterberg

  I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

  Read the article

• Windows 7 cannot view FAT32 formatted bootable usb drive

  - by NaimK

  I'm having some issue where when I run bootsect with a command line of "bootsect.exe /nt52 : /force /mbr", then Windows 7 (the comp I'm running bootsect on) can no longer view the contents of the usb drive. Explorer tries to look at it, and then fails, and I can't even correctly eject the drive, when I try, it does nothing until I yank it out, and then I get some errors. Bootsect reports success on writing the volume and the drive data to make it bootable, but it doesn't boot after copying on the necessary files (files from a created ISO, it works when it is created on XP). But this may be that I'm not following the same instructions as when building it on XP since some of the command don't seem to always work correctly. The drive is formatted to FAT32 (necessary I think, cause I'm installing a custom version of Win XP embedded). Any ideas? Or perhaps a good or automated way to load a usb with a custom version of win xp and make it bootable from Win 7? I am having some issues, for instance, "ufdprep.exe" rarely works when I'm running it from Windows 7, I don't know why.

  Read the article

• USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

  - by Pete Roberts

  Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

  Read the article

• How to configure Farsun USB barcode scanner to not auto-trigger

  - by David Grayson

  At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

  Read the article

• Burn bootable iso image to USB stick using dd: Won't boot (despite USB first in boot sequence)

  - by Nicolas Raoul

  I have installed Ubuntu on a Lenovo Thinkpad R500 2732, and I must update the BIOS. On the Lenovo website, I am offered this: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad R500 I guess a bootable CD that would do a BIOS update is indeed what I need. (still wondering why it says "Windows" though... if it is bootable should not it be OS-agnostic?) Not wanting to waste a CD, I copied the image to my USB stick: sudo dd if=/home/nico/7yuj40uc.iso of=/dev/sdb1 bs=1M And rebooted, after making sure USB is first in the boot sequence. PROBLEM: It does not boot. Did I forget one step? Details about the iso image (readme): ls -lh 7yuj40uc.iso 25M file 7yuj40uc.iso /home/nico/7yuj40uc.iso: # ISO 9660 CD-ROM filesystem data '7YUJ40US ' (bootable) (Scroll to the right: it says "bootable") UNetbootin does not work because it is not a Linux image. Some people on the Internet advise to copy the content of the ISO and do other steps. This ISO has zero ISO content so it would not work. If I mount the ISO, I can see it contains zero files.

  Read the article

• PS/2 to USB adapter doesn't work with Model M keyboard

  - by mickburkejnr

  I bought a server about 3 months ago from a friend, and I have only had time to tinker with it in the last week. I noticed that this server doesn't have any PS/2 ports, which meant configuring it was near impossible. I don't have any USB keyboards in the house, I only have an IBM Model M keyboard (built 1994) and another IBM keyboard that was built circa 2001. Both of them have PS/2 connections. I bought an adapter off eBay, and when I used it with the Model M keyboard the three lights on the keyboard flashed for a split second, but then the keyboard is then unresponsive. I can bash away at the keys for ages and nothing will happen. The same applies to the later built IBM keyboard. What could I do to make the adapter work? I am getting the loan of a USB keyboard in two weeks time, but I'd like a more permanent solution without having to rely on getting the loan of a keyboard every time I have to perform maintenance on the server. And as I already have two keyboards which work fine and I like using, I don't really want to have to buy another keyboard just for use on the server.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >