Search Results

Search found 7755 results on 311 pages for 'usb cable'.

Page 43/311 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Can I charge USB devices from a powered hub that isn't connected to a PC?

  - by Anodyne

  This will probably sound familiar to most of you... In my home, we have a whole bunch of devices that can be charged via USB (two iPhones, a BlackBerry, an iPod Touch, etc ad nauseam). We also have a bunch of USB chargers, each of which has a single USB port on it. I'd like to have something permanently connected to AC power with at least 4 USB ports on it, so we can just plug devices in and don't need to go looking for a free outlet. So here's the question: if I buy a powered USB hub, will that do the job even if I don't connect it to a PC? Ideally if you have a hub that you can personally verify will be suitable, let me know the manufacturer and model :-) Thanks in advance! EDIT: The solution I eventually went for was this: Kensington 4-Port USB Charger for Mobile Devices (Europe) There's also a US version here: Kensington 4-Port USB Charger for Mobile Devices (USA) It arrived yesterday, so I used it to charge the following devices, all at the same time, overnight last night: 32GB iPhone 3GS 16GB iPhone 3G First-generation iPod Touch Kensington Portable Power Pack for Mobile Devices I can't say anything about the charging speed (as I left it overnight) but all devices were fully charged this morning.

  Read the article

• USB-keyboard & mouse powered off in windows-7

  - by sinned

  I have a problem with a pc where usb devices are not getting any power as soon as windows starts up (it works in preboot). This pc has no ps/2, so there is no chance for input, also not in secure boot mode. I "tidied up" using sysinternals autostart, so there is a chance I messed something up here, although I'm quite sure I only deleted some old printer drivers from autostart. I do not know how to reset this, I cant even log in because there is no input possible. I could use a linux live cd, but I don't know what to do there because there is no sysinternals from linux into a not running windows... To make things even worse, I have the windows installation completely encrypted with truecrypt, so I haven't even tried windows recovery cd yet. There is no loss of data since I can access the disc with a live-linux, I only want to use it again without resetting up everything. Any suggestions?

  Read the article

• Make exact copy of USB stick [closed]

  - by Andrius Palivonas

  There's this school software on a USB drive. It only runs, when the stick they gave is plugged in. Cloning the drive with dd command didn't work. I'm guessing it checks the hardware ID of the flash drive. Is there any way to change drives information? I guess not, but is it possible to create a virtual flash drive with exactly same hardware id and all other read-only information that the software is most probably checking. EDIT: The paper math books we have dont' have answers. So when I'm doing homework I have no idea if did it right. The electronic version does have the answers. The publisher didn't put them into paper version because of simple reason - money. They would have to republish the book if some answers are found to be wrong. So I feel no shame trying to pirate that software, because publishers are ruining our math education.

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• Starting scheduled task by detecting connection of USB drive

  - by gemisigo

  I know it has been discussed before several times that it is not possible to start an application from an usb drive when connecting it due to limitations of autorun (or autoplay??) in Win 7. But it is possible to create a scheduled task having On an event type trigger and surely there must be an event occurring when the drive is connected. Does anybody have the slightest idea which Event ID should I use? Or at least what type of event? There are too many logs to pick from.

  Read the article

• It takes a long time until windows xp recognize I connected USB diks

  - by Pavol G

  Hello IT guys, I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognized it and show it as a new disk. I can also see (disk's LED is blinking) that something is scaning the disk when I connect it, when this is done Windows imediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using spybot), also run windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Thanks a lot for every advice!

  Read the article

• USB Mouse doesn't work after turning on Laptop

  - by Barry

  I have a USB mouse attached to my laptop which does not work when I switch my laptop on. I have to unplug it and plug it back in before it works. When I do this no driver installation occurs (presumably because it has already done this) the usual beep sound does occur and the mouse starts working again. If my laptop goes to sleep I can move the mouse and the laptop comes back to life. In fact it works perfectly apart from this annoying niggle on startup. Can anyone shed any light as to why I have to keep unplugging and plugging my mouse back on startup? I am running Windows 7 Home Premium Service Pack 1 (64 bit) on a Toshiba Satellite L755-1LL Laptop.

  Read the article

• USB webcam just works once and next time I've to reboot

  - by user30262

  I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb. The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again. Has anyone else noticed this behaviour? Is there some good solution to reset the camera without rebooting to make it work again?

  Read the article

• Dead USB flash drive

  - by Unsliced

  So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

  Read the article

• USB flash drive showing empty but half of the capacity is in Used

  - by tamakisquare

  Not sure if I should post my question in superuser, but it looks like the most appropriate place among all StackExchange sites. I have a 16GB Kingston DataTraveler USB drive. When I tried to use it this morning, it showed up nothing in there but yet its details showed that half of the capacity was in used. I tried it with OS X, Ubuntu, and Windows 7 and the results were the same. I tried to create a new folder and it worked. Apparently, the drive is working but somehow not showing my previously stored data. Note that I was still using the drive last night and there wasn't any problems. Following @rob's suggestion, du -h gave me: 16K ./.Trashes 960K ./.Spotlight-V100/Store-V1/Stores/2620683B-A38B-42F4-A247-45CAF4826ADE 976K ./.Spotlight-V100/Store-V1/Stores 1008K ./.Spotlight-V100/Store-V1 1.0M ./.Spotlight-V100 1.1M And, df -h gave me: /dev/sdb1 15G 7.9G 7.1G 53% /media/KINGSTON Confirming what I reported. Anyone got a clue/answer to this issue? Thanks.

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• Windows 8 apps not connecting to internet with USB dongle/modem

  - by Relborg

  The question pretty much says it all. I have Windows 8 Professional 64-bit and my main/only method of getting connected to the internet is to use this USB dongle/modem I have. Now it works perfectly, but when I go into the Windows "store" app it keeps on saying that I'm not connected to the web. In fact this happens for all "apps", they all think I'm not connected to the web when I actually am. Normal desktop applications e.g. browsers run fine. Is this a bug that has still not been resolved or is there some setting I need to go mess with? Thanks in advance!

  Read the article

• Installed Ubuntu on usb drive, now it's read-only and can't be formatted

  - by weiszam

  I installed Ubuntu (ubuntu-13.04-desktop-amd64) on a 8 gb pendrive. Because it worked pretty slow, I wanted to change it back to a normal pendrive. But this is what happened. Windows7 can't open the usb drive, can't view files or anything, can't access attributes. When I select to format, it says it can't format it because it is write-protected. Tried the same running from an Ubuntu, and trying from a booted GParted thing. When I view the partitions, they can't be deleted either. What should I do to get it formatted?

  Read the article

• Mounting external usb harddisk (ext4) in virtual box in windows

  - by twall

  I would like to mount my external linux formatted usb harddrive in a virtual machine. The host is windows 7. Unfortunately virtual box doesn't enumerate the external harddrive in the options menu of the virtual machine, even though it shows all other devices connected to the host. Windows can find the harddrive, but obviously just gives me the option to reformat it, because it doesn't support ext4. (ext2fsd or Ext2Read are no options, as I need newer ext4 features) How can I add a filter for my external harddrive so it is recognized by my virtual machine?

  Read the article

• Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

  - by Alkatraz

  windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

  Read the article

• 14.04.1 LTS 64 bit from USB does not see my windows 7 when I go to install it

  - by W J

  I suppose this is as much a question as a heads up/warning 14.04.1 LTS only gave me the option of writing over everything on one of my windows 7 machines. If I'd pushed the wrong button and continued I would have lost some mighty important items. On a similar windows laptop I succesfully installed 14.04.1 LTS 32 bit alongside windows 7 rather easily ( and I dig it!), there was a prompt in that case that let me select to install it alongside my windows OS.Yikes, not in this case. This laptop was formatted NTFS, the Ubuntu usb pendrive I formatted fat32. could be a clue? It looks like there is an advanced install ubuntu, but I am not that advanced. I may try to use windows diskformat (What fdisk is gone?) to make a partition, then see if the ubuntu on my usb stick "sees" my windows. If anybody has a better plan let me know. Mahalo AHA!? p.s. its a SSD harddrive, perhaps thats the crux?

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Asus V1S/V1V inverter cable

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. To me this means the inverter cable is damaged. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• Ubuntu Kernel Panic on Inserting Network Cable

  - by Skizz

  I've been having a recurring kernel panic with my Ubuntu 9.04 installation (see other posts by me). Today, I was fiddling around trying to get some cable attached when the system panicked. Looking at the layout, the only cable in the vicinity was the network cable. Upon further investigation, it seems that the system reliably panics whenever I insert a network cable. Removing the cable does not cause the panic. How do I stop the system panicking when I insert the network cable? If more information is needed, please add comments/answers and I'll post the required data.

  Read the article

• Best Easiest Fastest No Install USB Boot Disk in 4 Simple Steps :)

  - by PearlFactory

  USB Boot Disk When you look how to create USB Boot Disk on the web it is a nightmare   Here is the easiest I use that works for all MS prods At a computer running Windows Vista, Windows 7, or Windows Server 2008, run a command prompt as administrator and execute the following: Make Sure you have all explorer windows closed and nothing referencing the USB i.e a doc open in Word 1. C:\> diskpart DISKPART> list disk [Identify disk # of the USB key] DISKPART> sel disk 1 [assuming 1 was the # from above] DISKPART> clean [CAUTION—will wipe whichever disk is selected] DISKPART> cre part pri DISKPART> active DISKPART> assign DISKPART> format fs=ntfs quick DISKPART> exit C:\> exit 2. Copy the contents of the Windows Server 2008 R2 or any other MS OS  DVD/ISO to the USB key. 3. From the system tray, use the “Safely remove hardware” icon to safely remove the USB key from the computer. This helps ensure that all files have been fully written to the USB key. (Especially after the large file copy) 4. Restart,,,put usb in and Find reference from HP h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-1317ENW.pdf

  Read the article

• Booting Ubuntu 13.10 form USB on server with no OS (Dell PowerEdge T110)

  - by user35581

  I have a Dell PowerEdge T110 (Xeon 1220v2) server with no OS. From my mac, I was able to save the Ubuntu 13.10 for server iso (x86) and used UNetbootin to save the iso to a USB stick (2GB). I was hoping to boot the server from USB, and all seemed to be going well, BIOS even detected my USB drive when I plugged it in, but for some reason I'm getting a "Missing operating system" error. I checked the USB drive and it appears that UNetbootin put the correct files on it form a cursory glance (although I'm not entirely sure what I should be looking for). Should I be able to boot a server with no OS from a UNetbootin created Ubuntu 13.10 USB? And if so, why might BIOS not find the right files? I had read that there is a USB Emulation setting in BIOS, but I haven't been able to find this in the menus. My understanding is that by default, this is set to on. I might try wiping the USB stick and running UNetbootin again. The USB is formatted to MS-DOS FAT16 (should it be formatted some other way?).

  Read the article

• Remove Kernel Lock from Unmounted Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. The output of gphoto2 is then: # gphoto2 --list-config /Camera Configuration/Picture Settings/resolution /Camera Configuration/Picture Settings/shutter /Camera Configuration/Picture Settings/aperture /Camera Configuration/Picture Settings/color /Camera Configuration/Picture Settings/flash /Camera Configuration/Picture Settings/whitebalance /Camera Configuration/Picture Settings/focus-mode /Camera Configuration/Picture Settings/focus-pos /Camera Configuration/Picture Settings/exp /Camera Configuration/Picture Settings/exp-meter /Camera Configuration/Picture Settings/zoom /Camera Configuration/Picture Settings/dzoom /Camera Configuration/Picture Settings/iso /Camera Configuration/Camera Settings/date-time /Camera Configuration/Camera Settings/lcd-mode /Camera Configuration/Camera Settings/lcd-brightness /Camera Configuration/Camera Settings/lcd-auto-shutoff /Camera Configuration/Camera Settings/camera-power-save /Camera Configuration/Camera Settings/host-power-save /Camera Configuration/Camera Settings/timefmt Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command. Update 1: # mount | grep sdg # mount | grep sg7 # umount /dev/sg7 umount: /dev/sg7: not mounted # umount /dev/sdg umount: /dev/sdg: not mounted # gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') ***

  Read the article

• USB Hardware vs. Software Write Lock

  - by TreyK

  I'm in the market for a USB flash drive, and remember this cool feature a tiny 32MB flash drive of mine had: a write lock switch. This seemed like it would be an amazing feature to have as a shield against any nastiness happening to the drive on an unfamiliar computer. However, very few drives on the market offer this feature. Instead, it seems that forms of software protection are the more prominent method. This software protection causes me a bit of uneasiness, as it seems like this software wouldn't be nearly as bulletproof as a physical switch. Also, levels of protection seem to vary from product to product. Being able to protect certain folders from reading and/or writing would be nice, but is the security trade-off worth it? Just how effective can this software protection be? Wouldn't a simple format be able to clean any drive with software protection? My drive must also be compatible with Windows XP, Vista, and 7, as well as Linux and Mac. What would be the best way forward for getting a well-sized (~8GB) flash drive with a strong write protection implementation, for little or no more than a regular drive? Thanks.

  Read the article

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >