Search Results

Search found 47246 results on 1890 pages for 'system recovery'.

Page 360/1890 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

  - by David Skare

  Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

  Read the article

• MAAS/JuJu Clarifications

  - by ectoskeleton

  I really love the concept of MAAS underlying an OpenStack implementation, but there are a few questions about MAAS that I am not entirely clear on. Should all hosts be set to network boot at all times or after they have been registered and allocated as a service, should they boot to disk? After juju bootstrap is executed, I turn on the machine that has been allocated (note WoL isn't working, I suspect it's being blocked on the network), the machine boot's up and then juju status executes correct, agent running and all that good stuff. If I 'reboot' the machine (testing power failure/problem whatever), juju status comes back but the agent-state is no longer in running state, and so far I have to destroy the environment and restart. In all cases I have never been able to deploy any services to any of the other nodes. I deploy the service with juju, note which node it was assigned, and then start the system. The system just boots up into a basic node. If I SSH to it I have to enter password, so it's not setting up the ssh key or anything. This is on Ubuntu 12.04.1 LTS systems and HP GL360G7 hosts. The MAAS management server is running as a VM but all on the same network. At this point I am not sure if I am doing something wrong or if there is a problem somewhere else. Is the idea that anytime a host is rebooted it should be rebuilt from the ground up, or is something else going on behind the scene to tell it to boot the local image. If the latter, why doesn't the agent start on a system that has been successfully setup before (juju bootstrapped system)?

  Read the article

• Cannot boot computer, help please :(

  - by Austin

  Ok so here is more descriptions, I REALLY NEED HELP! I installed Ubuntu on a disk (unsure of v. I can't check.. Computer is broke :/ ) I then burned the disk I restarted computer pressed f12 blah blah it came up, I pressed enter for English, I plugged an Ethernet card in for better connection, and then started the installation.... I did the basics, and I entered a host name, and a user name and pass all that, when it came to partition page, I presse enter for no and then it went back to the installation page, I pressed install again, and it brought me back, so I selected yes , it loaded an it asked what software to instal I selected sh ( it was first option and I didn't know which to do ) so after everything finished loading, my disk was ejected the process finish, I run my computer and it opens up in log in page on cmd script I didn't know it, so I ran disk again makin a user and pass to remember.... Going back to login thing I logged in, and all it did was say my username... I didn't know what to do from there, I looked online found nothing but grub stuff, so I went to "Advanced Ubuntu options" and then "(Recovery Mode) and went to update grub... In middle o loading it asked to continue (Y/n) I typed Y and it finished, it went back to the options located in (Recovery Mode) and I closed it, and it loaded... And then showed up in another script screen, saying a paragraph on top, and on left side ( where login: would be located etc. ) it says "Grub" and I don't know what to type, if I turn off computer and turn back on it just goes straight to that again... PLEASE HELP:(

  Read the article

• Update to SQL Server Configuration Scripting Utility

  - by Bill Graziano

  Last spring I released a utility to script SQL Server configuration information on CodePlex.  I’ve been making small changes in this application as my needs have changed.  The application is a .NET 2.0 console application.  This utility serves two needs for me.  First it helps with disaster recovery.  All server level objects (logins, jobs, linked servers, audits) are scripted to a single file per object type.  This enables the scripts to be easily run against a DR server.  If these are checked into source control you can view the history of the script and find out what changed and when. The second goal is to capture what changed inside a database.  Objects inside a database (tables, stored procedures, views, etc.) are each scripted to their own file.  This makes it easier to track the changes to an object over time.  This does include permissions and role membership so you can capture security changes.  My assumption is that a database backup is the primary method of disaster recovery for databases so this utility is designed to capture changes to objects.  You can find the full list of changes from the original on the Downloads page on CodePlex.

  Read the article

• Is it possible to extend partition in which I have installed Ubuntu

  - by Santosh

  Before installing my current Ubuntu Oneiric Ocelot I was having 3 partitions on my hard drive (each in NTFS, and divided in 21GBs, 10GBs and 37GBs; approx 80GB). I put in the DVD in DVD-ROM and booted up with it. I was prompt whether to install Ubuntu side by current operating system (Windows 7) or totally remove all operating system. I choose to install side by the current operating system. In next screen I took one of my partition (the one which was of 37GB) and totally formatted it. Then created a ext4 file system of 10GBs on it (here 'it' means partition that was of 37GB, not whole HDD). While proceeding I was asked to make swap partition so I created another swap partition of 5GBs. I have Ubuntu installed, but now I am regretting about that 10GB, I should have done it more since I have much more space on my hard drive. And I have 22GBs of my hard drive useless (neither it is in ntfs nor ext4). I want to increase the size of ext4 partition in which I have installed my Ubuntu; from 10GB to something more.

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Solaris 11 Customer Maintenance Lifecycle

  - by user12244672

  Hi Folks, Welcome to my new blog, http://blogs.oracle.com/Solaris11Life , which is all about the Customer Maintenance Lifecycle for Image Packaging System (IPS) based Solaris releases, such as Solaris 11. It'll include policies, best practices, clarifications, and lots of other stuff which I hope you'll find useful as you get up to speed with Solaris 11 and IPS.   Let's start with a version of my Solaris 11 Customer Maintenance Lifecycle presentation which I gave at this year's Oracle Open World and at the recent Deutsche Oracle Anwendergruppe (DOAG - German Oracle Users Group) conference in Nürnberg. Some of you may be familiar with my Patch Corner blog, http://blogs.oracle.com/patch , which fulfilled a similar purpose for System V [five] Release 4 (SVR4) based Solaris releases, such as Solaris 10 and below. Since maintaining a Solaris 11 system is quite different to maintaining a Solaris 10 system, I thought it prudent to start this 2nd parallel blog for Solaris 11. Actually, I have an ulterior motive for starting this separate blog.  Since IPS is a single tier packaging architecture, it doesn't have any patches, only package updates.  I've therefore banned the word "patch" in Solaris 11 and introduced a swear box to which my colleagues must contribute a quarter [$0.25] every time they use the word "patch" in a public forum.  From their Oracle Open World presentations, John Fowler owes 50 cents, Liane Preza owes $1.25, and Bart Smaalders owes 75 cents.  Since I'm stinging my colleagues in what could be a lucrative enterprise, I couldn't very well discuss IPS best practices on a blog called "Patch Corner" with a URI of http://blogs.oracle.com/patch.  I simply couldn't afford all those contributions to the "patch" swear box. :) Feel free to let me know what topics you'd like covered - just post a comment in the comment box on the blog. Best Wishes, Gerry.

  Read the article

• Unable to mount an LVM Hard-drive after upgrade

  - by Bruce Staples

  I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

  Read the article

• Should ATI catalyst be installed for sake of openCL?

  - by G Sree Teja Simha

  I have a HP Envy 4 1025tx with Hybrid graphics. Although this is a 64bit system, I've installed 32bit Ubuntu on it for some reasons.(Hybrid graphics don't do well with 64bit Ubuntu.-"Some one on some forum") I had heating problems with the GPU but I've fixed them all with vgaswitcheroo. But now I wanted to use my Blender on my Ubuntu. To my surprise Blender didn't detect the dedicated 7670m card in my machine. I've confirmed with cat /sys/kernel/debug/vgaswitcheroo/switch Both IGD and DIS were up and running. I dont seem to have libopencl on my /usr/lib even though my synaptic manager says that I have installed it. I'm not quite sure what I've installed. It says that I've installed "ocl-icd-libopencl1". So my question is... Do I have opencl on my system? If not do I have to get propreitary ATI drivers for sake of opencl(fglrx wrecks up my unity totally on my system I need directions to fix it if this is the choice)? Should I get a 64bit Ubuntu installed on this system?

  Read the article

• mdadm: brakes boot due to "is not ready yet or not present" error

  - by BarsMonster

  This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

  Read the article

• How can I improve my isometric tile-picking algorithm?

  - by Cypher

  I've spent the last few days researching isometric tile-picking algorithms (converting screen-coordinates to tile-coordinates), and have obviously found a lot of the math beyond my grasp. I have come fairly close and what I have is workable, but I would like to improve on this algorithm as it's a little off and seems to pick down and to the right of the mouse pointer. I've uploaded a video to help visualize the current implementation: http://youtu.be/EqwWcq1zuaM My isometric rendering algorithm is based on what is found at this stackoverflow question's answer, with the exception that my x and y axis' are inverted (x increased down-right, while y increased up-right). Here is where I am converting from screen to tiles: // these next few lines convert the mouse pointer position from screen // coordinates to tile-grid coordinates. cameraOffset captures the current // mouse location and takes into consideration the camera's position on screen. System.Drawing.Point cameraOffset = new System.Drawing.Point( 0, 0 ); cameraOffset.X = mouseLocation.X + (int)camera.Left; cameraOffset.Y = ( mouseLocation.Y + (int)camera.Top ); // the camera-aware mouse coordinates are then further converted in an attempt // to select only the "tile" portion of the grid tiles, instead of the entire // rectangle. this algorithm gets close, but could use improvement. mouseTileLocation.X = ( cameraOffset.X + 2 * cameraOffset.Y ) / Global.TileWidth; mouseTileLocation.Y = -( ( 2 * cameraOffset.Y - cameraOffset.X ) / Global.TileWidth ); Things to make note of: mouseLocation is a System.Drawing.Point that represents the screen coordinates of the mouse pointer. cameraOffset is the screen position of the mouse pointer that includes the position of the game camera. mouseTileLocation is a System.Drawing.Point that is supposed to represent the tile coordinates of the mouse pointer. If you check out the above link to youtube, you'll notice that the picking algorithm is off a bit. How can I improve on this?

  Read the article

• Where to install boot loader on a Zenbook Prime?

  - by Christians

  I cannot figure out where to install the boot loader on my Zenbook UX31A Prime. I have installed Ubuntu many times on normal hard drives, but this is the first SSD and I am struggling. Installed Ubuntu 12.04 64-bit selecting "UEFI: general" boot entry. Installation type: Something Else Created partition /sda5 mount as /, /sda6 mount as /home, /sda7 mount as swap Selected /dev/sda for boot loader installation. Other options are /dev/sda, /dev/sda1/dev/sda3 Windows 7 (loader) ... Grub comes up with 6 entries Ubuntu - this runs great Linux 3.2.0-29-generic recovery mode: mode hangs with "fb: conflicting fb hw usae interdrnfb vs EFI VGA - removing generic adapter" memtest86:erro: unknown command `linux 16' memtest86 serial: unknown command `linux 16' Windows 7 (loader) (on /dev/sda3): invalid EFI file path Windows Recovery Environment (on /dev/sda8): unknown command drivemap, invalid EFI file path. My workaround for booting Windows 7 is hitting ESC during boot, windows boot manager comes up and * for booting into Windows 7 I select "WIndows Boot Manager (PO: SanDisk ....". * for booting into Ubuntu I select ubuntu (P0: SanDisk...) How can I boot into Windows from Grub?

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

  - by mengelkoch

  I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

  Read the article

• ArchBeat Link-o-Rama for October 18, 2013

  - by OTN ArchBeat

  Enriching XMLType data using relational data – XQuery and fn:collection in action | Lucas Jellema Another detailed technical post from the always prolific Lucas Jellema. Evil Behind ChangeEventPolicy PPR in CRUD ADF 12c and WebLogic Stuck Threads | Andrejus Baranovskis The latest post from Oracle ACE Director Andrejus Baranovskis is a bit of a preview of his presentation at the upcoming UKOUG 2013 event. Podcast: Interview with authors of "Hudson Continuous Integration in Practice" For your listening pleasure... Here's an Oracle Author Podcast Interview with "Hudson Continuous Integration in Practice" authors Ed Burns and Winston Prakash. Manual Recovery Mechanisms in SOA Suite and AIA | Shreenidhi Raghuram Solution architect Shreenidhi Raghuram's post combines information from several sources to provide "a quick reference for Manual Recovery of Faults within the SOA and AIA contexts." Event: Harnessing Oracle Weblogic and Oracle Coherence This OTN Virtual Developer Day event features eight sessions in two tracks, with presentations and hands-on labs for developers and architects delivered by experts in Weblogic, Coherence, and ADF. Registration is free. November 5th, 2013. 9am-1pm PT / 12pm-4pm ET / 1pm-5pm BRT Podcast: IoT Challenges and Opportunities - Part 2 Part 2 of the OTN ArchBeat Internet of Things podcast features a roundtable discussion of IoT challenges: massive data streams, security and privacy issues, evolving standards and protocols. Listen! Video: Design - ADF Architectural Patterns - Two for One Deal | Chris Muir Chris Muir explores the reuse of BTF workspaces across multiple applications and the advantages and disadvantages of reuse at the application level. Thought for the Day "Can't nothing make your life work if you ain't the architect." — Terry McMillan, American author (Born October 18, 1951) Source: brainyquote.com

  Read the article

• How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

  - by g0lem

  I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• F# Simple Twitter Update

  - by mroberts

  A short while ago I posted some code for a C# twitter update.  I decided to move the same functionality / logic to F#.  Here is what I came up with. 1: namespace Server.Actions 2:   3: open System 4: open System.IO 5: open System.Net 6: open System.Text 7:   8: type public TwitterUpdate() = 9: 10: //member variables 11: [<DefaultValue>] val mutable _body : string 12: [<DefaultValue>] val mutable _userName : string 13: [<DefaultValue>] val mutable _password : string 14:   15: //Properties 16: member this.Body with get() = this._body and set(value) = this._body <- value 17: member this.UserName with get() = this._userName and set(value) = this._userName <- value 18: member this.Password with get() = this._password and set(value) = this._password <- value 19:   20: //Methods 21: member this.Execute() = 22: let login = String.Format("{0}:{1}", this._userName, this._password) 23: let creds = Convert.ToBase64String(Encoding.ASCII.GetBytes(login)) 24: let tweet = Encoding.ASCII.GetBytes(String.Format("status={0}", this._body)) 25: let request = WebRequest.Create("http://twitter.com/statuses/update.xml") :?> HttpWebRequest 26: 27: request.Method <- "POST" 28: request.ServicePoint.Expect100Continue <- false 29: request.Headers.Add("Authorization", String.Format("Basic {0}", creds)) 30: request.ContentType <- "application/x-www-form-urlencoded" 31: request.ContentLength <- int64 tweet.Length 32: 33: let reqStream = request.GetRequestStream() 34: reqStream.Write(tweet, 0, tweet.Length) 35: reqStream.Close() 36:   37: let response = request.GetResponse() :?> HttpWebResponse 38:   39: match response.StatusCode with 40: | HttpStatusCode.OK -> true 41: | _ -> false   While the above seems to work, it feels to me like it is not taking advantage of some functional concepts.  Love to get some feedback as to how to make the above more “functional” in nature.  For example, I don’t like the mutable properties.

  Read the article

• ArchBeat Link-o-Rama for 2012-09-25

  - by Bob Rhubart

  Oracle 11gR2 RAC on Software Defined Network (SDN) | Gilbert Stan "The SDN [software defined network] idea is to separate the control plane and the data plane in networking and to virtualize networking the same way we have virtualized servers," explains Gil Standen. "This is an idea whose time has come because VMs and vmotion have created all kinds of problems with how to tell networking equipment that a VM has moved and to preserve connectivity to VPN end points, preserve IP, etc." H/T to Oracle ACE Director Tim Hall for the recommendation. ServerSent-Events on WebLogic Server | Steve Buttons "The HTML5 ServerSent-Event model provides a mechanism to allow browser clients to establish a uni-directional communication path to a server, where the server is then able to push messages to the browser at any point in time," explains Steve "Buttso" Buttons. Focus on Architects and Architecture This handy guide for sessions and other activities at Oracle OpenWorld 2012 focuses on IT architecture in all its many facets and permutations. Operating System Set-up for WebLogic Server | Rene van Wijk Oracle ACE Rene van Wijk shows you how to set-up an operating system for WebLogic Server. "We will use VMware as our virtualization platform and use CentOS as the operating system," says van Wijk. "We end the post by showing how the operating system can be tuned when running a Java process such as WebLogic Server." Free eBook: Oracle SOA Suite - In the Customer's Words If you find yourself in the position of having to sell the idea of Service-oriented Architecture to business stakeholders this free e-book may come in very handy. Check out "Oracle SOA Suite: In the Customer's Words. (Registration / Oracle.com login required.) Thought for the Day "The first rule of any technology used in a business is that automation applied to an efficient operation will magnify the efficiency. The second is that automation applied to an inefficient operation will magnify the inefficiency." — Bill Gates Source: BrainyQuote.com

  Read the article

• Dynamically load images inside jar

  - by Rahat Ahmed

  I'm using Slick2d for a game, and while it runs fine in Eclipse, i'm trying to figure out how to make it work when exported to a runnable .jar. I have it set up to where I load every image located in the res/ directory. Here's the code /** * Loads all .png images located in source folders. * @throws SlickException */ public static void init() throws SlickException { loadedImages = new HashMap<>(); try { URI uri = new URI(ResourceLoader.getResource("res").toString()); File[] files = new File(uri).listFiles(new FilenameFilter(){ @Override public boolean accept(File dir, String name) { if(name.endsWith(".png")) return true; return false; } }); System.out.println("Naming filenames now."); for(File f:files) { System.out.println(f.getName()); FileInputStream fis = new FileInputStream(f); Image image = new Image(fis, f.getName(), false); loadedImages.put(f.getName(), image); } } catch (URISyntaxException | FileNotFoundException e) { System.err.println("UNABLE TO LOAD IMAGES FROM RES FOLDER!"); e.printStackTrace(); } font = new AngelCodeFont("res/bitmapfont.fnt",Art.get("bitmapfont.png")); } Now the obvious problem is the line URI uri = new URI(ResourceLoader.getResource("res").toString()); If I pack the res folder into the .jar there will not be a res folder on the filesystem. How can I iterate through all the images in the compiled .jar itself, or what is a better system to automatically load all images?

  Read the article

• Need to re-build an application - how?

  - by Tom

  For our main system, we have a small monitor application that sits outside our network and periodically tries to log in to verify the system still works. We have a problem with the monitor though in that the communications component set (Asta 3 inside Delphi applications) doesn't always connect through. Overall, I'd say it's about 95% reliable, but that other 5% kills the monitor since it will try to log in and hang on the connection attempt (no timeout in the component). This really isn't an issue on the client side of the system since the clients don't disconnect and reconnect repeatedly on the same application instance, but I need a way to make sure the monitor stays up and continues working even when the component fails on a run. I have a few ideas as to which way to have the program run, the main idea being to put the communications inside a threaded data module so that if one thread crashes then another thread can test later and the program keep going. Does this sound like a valid way to go? Any other ideas how to ensure a reliable monitoring application with a less than 100% reliable component? Thanks. P.S. Not sure these tags are the most appropriate. Tried including "system-reliability" as one, but not high enough rep to create.

  Read the article

• C# Simple Twitter Update

  - by mroberts

  For what it's worth a simple twitter update. using System; using System.IO; using System.Net; using System.Text; namespace Server.Actions { public class TwitterUpdate { public string Body { get; set; } public string Login { get; set; } public string Password { get; set; } public override void Execute() { try { //encode user name and password string creds = Convert.ToBase64String(Encoding.ASCII.GetBytes(string.Format("{0}:{1}", this.Login, this.Password))); //encode tweet byte[] tweet = Encoding.ASCII.GetBytes("status=" + this.Body); //setup request HttpWebRequest request = (HttpWebRequest)WebRequest.Create("http://twitter.com/statuses/update.xml"); request.Method = "POST"; request.ServicePoint.Expect100Continue = false; request.Headers.Add("Authorization", string.Format("Basic {0}", creds)); request.ContentType = "application/x-www-form-urlencoded"; request.ContentLength = tweet.Length; //write to stream Stream reqStream = request.GetRequestStream(); reqStream.Write(tweet, 0, tweet.Length); reqStream.Close(); //check response HttpWebResponse response = (HttpWebResponse)request.GetResponse(); //... } catch (Exception e) { //... } } } }

  Read the article

• Cannot boot after installing ubuntu on lenovo x120e

  - by tutysara

  I have installed ubuntu 11.10 on my x120e using amd64 alternate iso image. The installation went fine, but it is having issues while booting after a successful installation, it says - "No Operating System Found". I followed the instruction at - help.ubuntu.com/community/X120e#Installation to purge grub-efi and installed grub-pc, even then I couldn't boot into ubuntu.(got the same "No Operating System Found") This is the file from boot-repair with this setup - http://pastebin.ubuntu.com/926556/ Then I asked in #ubuntu and they suggested me to create a bios-boot partition, I was not very comfortable with the solution they had suggested but gave it a try anyhow. I re-sized my initial partition and made 4 MB free space in the beginning of the partition and had set the flag bios_grub. Re-installed ubuntu 11.10 this time using amd64 desktop iso image file. Installation went fine as before but finally this time also the system didn't boot, it gave the same - "No Operating System Found" message. In BIOS I have the settings as to use both (Legacy and UEFI) and with UEFI tried first. This is the boot-repair file from my latest setup - http://pastebin.ubuntu.com/926761 Any help/suggestions are appreciated.

  Read the article

• What's the best way to manage error logging for exceptions?

  - by Peter Boughton

  Introduction If an error occurs on a website or system, it is of course useful to log it, and show the user a polite message with a reference code for the error. And if you have lots of systems, you don't want this information dotted around - it is good to have a single centralised place for it. At the simplest level, all that's needed is an incrementing id and a serialized dump of the error details. (And possibly the "centralised place" being an email inbox.) At the other end of the spectrum is perhaps a fully normalised database that also allows you to press a button and see a graph of errors per day, or identifying what the most common type of error on system X is, whether server A has more database connection errors than server B, and so on. What I'm referring to here is logging code-level errors/exceptions by a remote system - not "human-based" issue tracking, such as done with Jira,Trac,etc. Questions I'm looking for thoughts from developers who have used this type of system, specifically with regards to: What are essential features you couldn't do without? What are good to have features that really save you time? What features might seem a good idea, but aren't actually that useful? For example, I'd say a "show duplicates" function that identifies multiple occurrence of an error (without worrying about 'unimportant' details that might differ) is pretty essential. A button to "create an issue in [Jira/etc] for this error" sounds like a good time-saver. Just to re-iterate, what I'm after is practical experiences from people that have used such systems, preferably backed-up with why a feature is awesome/terrible. (If you're going to theorise anyway, at the very least mark your answer as such.)

  Read the article

• State Design Pattern .NET Code Sample

  using System;using System.Collections.Generic;using System.Linq;using System.Text;class Program{ static void Main(string[] args) { Person p1 = new Person("P1"); Person p2 = new Person("P2"); p1.EatFood(); p2.EatFood(); p1.Vomit(); p2.Vomit(); }}interface StomachState{ void Eat(Person p); void Vomit(Person p);}class StomachFull : StomachState{ public void Eat(Person p) { Console.WriteLine("Can't eat more."); } public void Vomit(Person p) { Console.WriteLine("I've just Vomited."); p.StomachState = new StomachEmpty(); }}class StomachEmpty : StomachState{ public void Eat(Person p) { Console.WriteLine("I've just had food."); p.StomachState = new StomachFull(); } public void Vomit(Person p) { Console.WriteLine("Nothing to Vomit."); }}class Person{ private StomachState stomachState; private String personName; public Person(String personName) { this.personName = personName; StomachState = new StomachEmpty(); } public StomachState StomachState { get { return stomachState; } set { stomachState = value; Console.WriteLine(personName + " Stomach State Changed to " + StomachState.GetType().Name); Console.WriteLine("***********************************************\n"); } } public Person(StomachState StomachState) { this.StomachState = StomachState; } public void EatFood() { StomachState.Eat(this); } public void Vomit() { StomachState.Vomit(this); }} span.fullpost {display:none;}

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >