Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 361/609 | < Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Linux USB/Serial port won't create a tty device in /dev

  - by Dave

  I am connecting a USB to serial driver port to my system and I get about halfway to where I need to go. When it is plugged in dmesg indicates: <6>usb 2-1: new full speed USB device using sl811-hcd and address 4 <6>usb 2-1: configuration #1 chosen from 1 choice and lsusb Bus 2 Device 4: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 2 Device 1: ID 0000:0000 Bus 1 Device 1: ID 0000:0000 I get a series of usbdev2.4 (usbdev2.4, usbdev2.4_ep00, etc) devices in dev but no ttyUSB0 or anything that I can open with minicom. How do I get the system to create the /dev device? Thanks Dave

  Read the article

• nginx status code 200 and 304

  - by Chamnap

  I'm using nginx + passenger. I'm trying to understand the nginx response 200 and 304. What does this both means? Sometimes, it responses back in 304 and others only 200. Reading the YUI blog, it seems browser needs the header "Last-Modified" to verify with the server. I'm wondering why the browser need to verify the last modified date. Here is my nginx configuration: location / { root /var/www/placexpert/public; # <--- be sure to point to 'public'! passenger_enabled on; rack_env development; passenger_use_global_queue on; if ($request_filename ~* ^.+\.(jpg|jpeg|gif|png|ico|css|js|swf)$) { expires max; break; } } How would I add the header "Last-Modified" to the static files? Which value should I set?

  Read the article

• Why was my site rejected for Google Adsense?

  - by hyuun jjang

  I have a 3 year old blog and its got around 16 articles/tutorials about some programming problems and solutions. It's getting pretty much a lot of view lately so I decided to apply for a google adsense account. When I first applied via blogger, google replied with the following statement: Page Type: In order to participate in Google AdSense, publishers' websites and application information must satisfy the following guidelines: - Your website must be your own top-level domain (www.example.com and not www.example.com/mysite). - You must provide accurate personal information with your application that matches the information on your domain registration. - Your website must contain substantial, original content... So, as I understood it, I decide to buy a domain and point my blogger blog to that new naked domain. and here is the newly bought domain where all the contents of my old blog resides. http://icodeya.com/ I reapplied, hoping that this time, I will make the cut. But then I got this reply Further detail: Unable to review your site: While reviewing http://www.icodeya.com/, we found that your site was down or unavailable. We suggest you check whether there was a typo in the URL submitted. When your site is operational, you can resubmit your application with the correct site by following the directions below. I'm a bit disappointed. Maybe I did something wrong with DNS configuration or something. But you can clearly see that my site is fully functional. I heard that google sends robots to crawl on to the site etc. It's just sad because I invested on a domain name, and now I can't even find ways to earn from it. Any tips?

  Read the article

• How to route traffic through a specific SOCKS proxy on a per-app basis?

  - by GJ.

  I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis? It would also be helpful to know if there's a way to perform such routing globally, based on specific IP addresses (as this could allow for some reasonable workaround).

  Read the article

• Not able to login to new AMI on EC2 - moveing from micro to small instance

  - by zengr

  I had a t1.micro instance (old_server) on Linux on EC2 and now I need to upgrade my server to m1.small Linux (new_server). So, here is what I did: Shutdown old_server and create an AMI. Launch the new AMI with m1.small configuration. (I kept the key and security group same as old_server) I tried to login by: ssh -i my_key.pem [email protected] But, it gives a connection timeout error. My login to old_server works fine. So, my question is: What is the correct way to scale up (vertically) an EC2 instance? Where am I going wrong in the above mentioned step? When I create an AMI in step 1, is the EBS (data) also copied.

  Read the article

• verisign certificate into jboss server SSL

  - by rfders

  i'm trying to enable jboss to uses ssl protocol using a previously generated certificate from verisign, i imported both certificate, server certificate and ca certificate into the keytore file, and i configured the server.xml to use that keystore and activate ssl protocol, then when i run the jboss, I got this error "certificate or key corresponds to the SSL cipher suites which are enabled" Question, reading some post on internet, i found that every example was made it generating a Certificate Request, it stricly necesary to do that if i already have the server certificate and that CSR has to be imported into the keystore as well ? at this point i'm very confused about this issue, i tried almost every solutions posted in several forums but till now i haven't any luck !! can you give me some tips in order to solve this problem. thanks in advance this are my keystore file: Keystore type: jks Keystore provider: SUN Your keystore contains 2 entries j2ee, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): 69:CC:2D:2A:2D:EF:C4:DB:A2:26:35:57:06:29:7D:4C ugent, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): AC:D8:0E:A2:7B:B7:2C:E7:00:DC:22:72:4A:5F:1E:92 and my server.xml configuration:

  Read the article

• Password Expired Server 2008 R2

  - by Shaharyar

  Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

  Read the article

• Everytime I click on a link from within Mac, parallels boots up my Windows VM and opens the link there

  - by Christoph

  Everytime I click on a link from within Mac, parallels boots up my Windows VM and opens the link there. That's super annoying and I haven't found a configuration to change it. In the settings of my Windows VM there is an option where to launch the webbrowser. However that seems to only affect links that I open from within my Windows session. UPDATE I just stumbled across this answer: How to disassociate a file type with an application in Mac OS So I disabled "share windows apps with mac" completely. Also this seems to be overly protective it at least does the trick. I think it also deactivates that running windows apps show up in the dock but I don't care that much about that anyway.

  Read the article

• Adding MX records to DNS

  - by Teddy

  Let's say I have a computer A which is running postfix, computer B is running tinydns. On domain project.domain.com I'm running httpd server and other server with DNS (tinydns) have entries like =project.domain.com:1.2.3.4:86400 and +project.domain.com:1.2.3.4:86400 where 1.2.3.4 is correct addres for server which runs httpd server. I also have a postfix mail server on 1.2.3.5 which I'd like to work with this domain (project.domain.com). I'm afraid that if I add another alias like +project.domain.com:1.2.3.5:86400 to tinydns configuration - it could break. How that entry should look like? Thank you for any hints.

  Read the article

• How to reassign drive back into MediaShield (nvidia) RAID stripe

  - by scottwed

  So I managed to inadvertently remove the RAID configuration from 1 drive of a 2 drive stripe. I have both drives, unmodified, and undamaged. Specifically for MediaShield RAID, is there any way to reattach the 2nd drive back into the stripe? Current state is the stripe is displayed in Error status, and I have the other drive available, but unassigned. I strongly suspect there is no solution without purging the array completely and redefining the stripe, but I figured it was worth asking before I wipe out the data.

  Read the article

• Transmission shutdown script for multiple torrents?

  - by Khurshid Alam

  I have written a shutdown script for transmission. Transmission calls the script after a torrent download finishes. The script runs perfectly on my machine (Ubuntu 11.04 & 12.04). #!/bin/bash sleep 300s # default display on current host DISPLAY=:0.0 # find out if monitor is on. Default timeout can be configured from screensaver/Power configuration. STATUS=`xset -display $DISPLAY -q | grep 'Monitor'` echo $STATUS if [ "$STATUS" == " Monitor is On" ] ### Then check if its still downloading a torrent. Couldn't figure out how.(May be) by monitoring network downstream activity? then notify-send "Downloads Complete" "Exiting transmisssion now" pkill transmission else notify-send "Downloads Complete" "Shutting Down Computer" dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.RequestShutdown fi exit 0 The problem is that when I'm downloading more than one file, when the first one finishes, transmission executes the script. I would like to do that but after all downloads are completed. I want to put a 2nd check ( right after monitor check) if it is still downloading another torrent. Is there any way to do this?

  Read the article

• IPv6 tunnels - any easy way to turn them on and off?

  - by Rob Hoare

  I've set up a tunnelbroker.net (Hurricane Electric) IPv6 tunnel from my laptop running 12.04. Works fine, and allows me to test the dual-stack configuration on my remote webservers etc. until native IPv6 is available on my ISP. However, there are times when I don't want the tunnel. For example if I'm accessing something that requires an IPv4 address in my own country rather than the Tunnelbroker tunnel endpoint, or if I'm away from the local IPv4 tunnel endpoint, or if I simply want to test without IPv6. Is there a simple way to disable and then re-enable the IPv6 tunnel, without rebooting? For context, here's what's in my /etc/network/interfaces (NNN replaces numbers): auto he-ipv6 iface he-ipv6 inet6 v4tunnel endpoint 216.218.NNN.NNN address 2001:470:NNN:NNN::2 netmask 64 up ip -6 route add default dev he-ipv6 down ip -6 route del default dev he-ipv6 Is there a network manager application (gui or command line) to selectively enable/disable parts of /etc/network/interfaces, or IPv6 in general? I found even by commenting out that out (and reloading networking) it's tough to get the IPv6 to go away. A "tunnel on/off" button in networking would be great, like using a VPN.

  Read the article

• How do I install and run Tomcat on port 80 as my only web server? (Rooted Ubuntu box)

  - by gav

  Hi All, tl;dr - I have a rooted linux box that I want to run tomcat on as a server (No Apache Web Server) how would you set this up avoiding common security pitfalls? I've written a Grails App that I want to run on a VPS I rent. The VPS has very little memory and I am using it for the sole purpose of running this application so I don't need the apache web server. This is my first venture into Server administration and I'm sure to fall into some well known traps. Should I use iptables to redirect requests from port 80 to 8080? Should I run tomcat as root or as it's own user? What configuration settings would be good for a low memory system expecting less than 10 concurrent users? Hopefully an easy one for you! Anyone who could link to a tutorial would be a personal hero destined for great things no doubt. Gav

  Read the article

• NTP doesn't sync

  - by Jonathan

  I'm using Meinberg NTP to sync the time in a VPS. The clock refuses to sync - there's a ~30s shift comparing to other servers. Meinberg NTP comes with a status script that checks hte delay\jitter every 10s and it is showing all zeros. Actions I've taken which didn't help: Restarted the NTP service using a script that comes with Meinberg NTP Added port 123 for UDP and TCP as an exception port to Windows Firewall Added Meinberk NTP executables as an exception program to Windows Firewall validated iburst appears after each server listed in the configuration file Restarted the server The OS is a Windows Server Standard SP2 32bit. What did I miss?

  Read the article

• MSTSC Not working, disconnects shortly after connecting

  - by F4r-20

  I'm currently having a problem connecting remotely to a server. It is a brand new build Windows 2008 R2, remote users are enabled. I'm trying to connect from a Windows 7 machine. Everytime I remotely connect to the server it will stay connected for a matter of seconds (maybe 3-5) and then disconnect and I get the standard old cannot connect and list of reasons it could be. Then I cannot connect again and get this prompt until I restart the server. As soon as it's finished restarting, it happens all over again. The network and hardware configuration between the two machines is completely reliable. Does anybody know what else I could try? Thanks.

  Read the article

• How does one check whether the OS X "disabled" flag for launchd services is set?

  - by Charles Duffy

  According to the man page for launchctl (emphasis mine):    -w   Overrides the Disabled key and sets it to false. In previous versions, this option would modify the configuration file. Now the state of the Disabled key is stored elsewhere on-disk. Because the current state of the disabled flag is no longer set in the .plist file itself, checking for the Disabled key is no longer an accurate way to tell if the service will run on next boot. Where is this "elsewhere on-disk"? More to the point (and more importantly), how does one check whether this flag is set? Also, is it possible to set a service to run on next boot without forcing it to start immediately (as with launchctl load -w /Library/LaunchDaemons/my-service.plist)?

  Read the article

• Why can't I install 10.04 on a system that already has 8.04?

  - by Android Eve

  Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Note: I also removed that partition trying to reformat it via GParted once 10.04 LiveCD is loaded. It didn't help. I believe that the problem lies in Ubuntu "deciding for me" that the HDDs should be "seen" as a RAID, hence any partition is seen by GParted as "busy" or "locked". Any idea how to solve this problem?

  Read the article

• From a DDD perspective is a report generating service a domain service or an infrastructure service?

  - by Songo

  Let assume we have the following service whose responsibility is to generate Excel reports: class ExcelReportService{ public String generateReport(String fileFormatFilePath, ResultSet data){ ReportFormat reportFormat = new ReportFormat(fileFormatFilePath); ExcelDataFormatterService excelDataFormatterService = new ExcelDataFormatterService(); FormattedData formattedData = excelDataFormatterService.format(data); ExcelFileService excelFileService = new ExcelFileService(); String reportPath= excelFileService.generateReport(reportFormat,formattedData); return reportPath; } } This is pseudo code for the service I want to design where: fileFormatFilePath: path to a configuration file where I'll keep the format of my excel file (headers, column widths, number of columns,..etc) data: the actual records returned from the database. This data can't be used directly coz I might need to make further calculations to the data before inserting them to the excel file. ReportFormat: Value object to hold the report format, has methods like getHeaders(), getColumnWidth(),...etc. ExcelDataFormatterService: a service to hold any logic that need to be applied to the data returned from the database before inserting it to the file. FormattedData: Value object the represents the formatted data to be inserted. ExcelFileService: a wrapper top the 3rd party library that generates the excel file. Now how do you determine whether a service is an infrastructure or domain service? I have the following 3 services here: ExcelReportService, ExcelDataFormatterService and ExcelFileService?

  Read the article

• A simple way to redirect http://mysite.com to http://mysite.com/mylink with Apache?

  - by Bart Silverstrim

  Just starting to try to get the hang of how all the directives and options work under Apache. I'd like to do a redirect with my one site (only running one site on the server) so that when a request comes in to http://mysite.com the server automatically redirects them to a sub-url of http://mysite.com/mylink. I have tried putting redirects into the file located in /etc/apache2/sites-enabled to rewrite this, but then the top level domain URL complains it isn't redirecting properly. I think what I want is a browser redirect, and thought using RewriteEngine On RewriteRule ^/$ /mylink [L,R] would work, but putting it into an .htaccess file didn't work (it redirected but immediately gave a 500 internal server error.) Putting it into the file in /etc/apache2/sites-enabled gives a configuration error when trying to restart Apache. I know it's something simple...but what am I missing?

  Read the article

• Default audio device gives an error on WINDOWS 7 (x64) when triing to run VLC from CMD (VideoLAN, VL

  - by Ole Jak

  I use WINDOWS 7 (x64) (Russian) I want to stream life audio from my default audio capture device (microphone) When I set up VLM settings using visual enviroment instruments - VLM settings it all works fine. But when I export created settings/configuration *.vlm file and try to inport it into VLM it gives me nothing I opened that .vlm there is some text... so now I try to run VLC with default settings like this: vlc -i dshow:// --dshow-adev= :sout=#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=http,mux=raw,dst=127.0.0.1:8084} but it dies giving me errors...=( So what shall I do to do live MP3 streaming from my default audio input device using VLC in non UI mode?

  Read the article

• How do I create a folder name that starts with a dot in Windows 7?

  - by Jim Tough

  I'm on a Windows 7 machine and need to create a new folder whose name starts with a dot. To be specific, I need to create the folder "C:\USERS\theusername\.ec2" because that is the default location that the AWS plugin for Eclipse likes to find certain configuration files. Windows 7 gives me an error message whenever I try to create a folder that starts with a dot: You must type a filename Seriously? There are already subfolders in this folder that start with a dot! How can I tell Windows 7 to just shut up and create my folder?

  Read the article

• Daylight Savings Time and Microsoft Exchange woes

  - by Scott

  Ever since the switch from Standard Time to Daylight Time, the time on our e-mail messages has been ahead by one hour. This symptom has me wondering if the cause is improper configuration of daylight savings settings. Since we're in a client/server environment, the clients synchronize with the server, and the server synchronizes with Boulder, Colorado. If I set both the server and the clients to automatically switch to daylight savings, the clients seem to regard the server as being set to Standard Time and set themselves an hour ahead of it, which is really two hours ahead. Should the server switch to daylight savings and the clients follow along on their next synchronization, or should the server stay on Standard Time and the clients switch over? The system clock on the Exchange Server is currently displaying the correct time. How do I get the e-mail messages to display the correct time in Outlook?

  Read the article

• Windows Server 2008 R2 stuck at System Recovery Options

  - by Magnus

  One of my Windows Server 2008 R2 server has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

  Read the article

• Windows Server 2008 R2 stuck at System Recovery Options

  - by Magnus

  My Windows Server 2008 R2 has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

  Read the article

< Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >