Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 361/778 | < Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• How to create persistent static route on Mac OS X 10.6?

  - by kopobamypa

  I need to add static route on Mac OS. I found good description here Permanent Static Route Mac OS X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• Load Testing Linux Virtual Server

  - by Anubhav Agarwal

  I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

  Read the article

• How can I use my laptop's monitor as my PC's ONLY monitor? (please vote to reopen) [closed]

  - by Randell

  Please vote to reopen. This is different from Can I use my laptop as a second monitor for my desk computer?, because that question is asking how to use the laptop screen as the secondary display, not as the only display. My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken.

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

• Aventail VPN connection doesn't work

  - by Warlax

  I installed the Aventail VPN client on both the Mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get this page: It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless.

  Read the article

• Trouble opening my router to my web server

  - by Justin Heather Barrios

  Here's the story. I have a webs server created and connected to my router. The website works great when I'm connected to the router, but when I'm off the network I can't access the website. I got the IP for my router by googling "what is my ip." I have opened ports 80 to 10080 to link to the server in the router. One odd thing that I don't understand. When I am in network if I access XXX.XXX.XX.XX:80 I can access the web page no problem. If I access XXX.XXX.XX.XX:81 (or any other port) I get the error "Cannot access server." Any idea what the problem could be? Could it be my ISP?

  Read the article

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• servers connected to a poweredge 6248 receive traffic for their 'neighbours'

  - by Hannes

  In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

  Read the article

• Where are Wireless Profiles stored in Ubuntu

  - by LonnieBest

  Where does Ubuntu store profiles that allow it to remember the credentials to private wireless networks that it has previously authenticate to and used? I just replaced my Uncle's hard drive with a new one and installed Ubuntu 10.04 on it (he had Ubuntu 9.10 on his old hard drive. He is at my house right now, and I want him to be able to access his private wireless network when he gets home. Usually, when I upgrade Ubuntu, I have his /home directory on another partition, so his wireless profile to his own network persists. However, right now, I'm trying to figure out which .folder I need to copy from his /home/user folder on the old hard drive, to the new hard drive, so that he will be able to have wireless Internet when he gets home. Does anyone know with certainty, exactly which folder I need to copy to the new hard drive to achieve this?

  Read the article

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• Windows 7 file sharing password protecting or making stuff available to just me

  - by Carbonara

  Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• Why my webservice not live on internet? [closed]

  - by blankon91

  I've windows server that goes live on internet, (e.g. www.mysite.com). Then I want to create another site with different port (e.g. www.mysite.com:502). I've create that and it works when I access it on local network, but when I access it from outside of local network (internet) the www.mysite.com:502 can't accessed but the www.mysite.com can accessed. what should I do to make www.mysite.com:502 goes online? I use windows server 2008 standard

  Read the article

• eSTEP Newsletter for the technical EMEA partner community

  - by mseika

  We are pleased to present to you the first issue of the eSTEP Newsletter, which is dedicated to support the technical EMEA partner community in the effort to provide more information on what is going on within the corporation, what is the technical news regarding Hardware, events and all the important things which we think may be of interest to you. Invitation: STEP TechCast: Oracle Solaris 11 Express Get an insight on how Oracle Solaris 11 Express has raised the bar on the innovation introduced in Oracle Solaris 10. Learn about the new integrated features such as: network based package management tools improvements to built-in virtualization new virtualised network architecture security enhancements file system evolution  Learn how Oracle Solaris 11 Express provides greatly decreased planned system downtime, performs a completely safe system upgrade, achieves an unprecedented level of flexibility for application consolidation, and provides the highest levels of security in your datacenter. Date and time: Thursday, 7. July 2011, 13:00 - 14:00 CEST Speaker: Joost Pronk van Hoogeveen Target audience: Tech Presales Webcast Coordinates: You will find the coordinates in the eSTEP portal under the Events tab. Use your email-adress and PIN: eSTEP_2011 to get access. We are happy to get your comments and feedback.

  Read the article

• Own hosting, own domain on Virtualbox Ubuntu server - dynamic IP

  - by Pawel

  Hi, I have bought my TLD domain, say domain.com. What I'd like to do is to host the website available under this address on my own computer. I'm assigned a dynamic IP, and I'm also behind a router in my local network. I'd run sites on my ubuntu server on a virtualbox machine which is available in my local network. Preferably, I'd like to have my own domain on some server, with which I could experiment as much as I need (so it's only for educational purposes), but I can't afford to buy such a service. Is it feasible? Can you provide steps I'd need to take to configure it (could be just general explanation). I'd need some guidance, please.

  Read the article

• Domain users sometimes cannot access our NAS

  - by Natalie

  I'm using a QNAP TS-410 Turbo NAS and I've got domain users connecting to it frequently everyday. However, there are times when their connection to the NAS will seem to just drop and, suddenly, they cannot access their network drives (which I had set up our Domain Controller to automatically map to folders on the NAS). Could you please tell me what may cause this? I don't think it is a network issue as everything else seems to work just fine. (If more details are needed, please let me know so I can update this question.)

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• Gentoo box can't cURL or ping after restarting net.eth1

  - by Curlybraces

  Hi all, the following is completely baffling me. We currently have a gentoo box which acts as our LAMP, DNS, DHCP server. This is assigned a static IP on the network. This server is connected directly to the internet via a BT BusinessHub Router. The server is also connected to a patch panel/switch port which connects the remaining office (around 10 PC's) to the server. Everything has been plain sailing until the other day when the server was restarted. For some reason now only portions of network accessibility is available depending on which ethernet device was last restarted. Restarting net.eth0 allows the office server to cURL, ping, etc but stops all networked PC's from accessing the internet. Then restarting net.eth1 restores all internet to the network but stops the server from curling, pinging, etc again. However, even when the server can't ping, curl, etc, I can still remote SSH and remote MySQL connect from the server command line to other external servers that we own. Here's my route map (router is 192.168.1.254): Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth1 Here's my /etc/conf.d/net: iface_eth0="192.168.1.99 broadcast 192.168.1.255 netmask 255.255.255.0" iface_eth1="dhcp" None of the above have ever been changed however. Things have just ceased to operate correctly, which makes me think it's a freshly added Iptables rule. Here's the Iptables Filter table: Chain INPUT (policy ACCEPT) target prot opt source destination DROP tcp -- ##.##.##.## anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:2199 ACCEPT tcp -- anywhere anywhere tcp dpt:3199 ACCEPT tcp -- ##.###.###.## anywhere tcp dpt:http ACCEPT tcp -- ###.###.##.## anywhere tcp dpt:2199 ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:http ACCEPT tcp -- ##.###.##.## anywhere tcp dpt:http ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:3128 ACCEPT udp -- ##.###.###.### anywhere udp dpt:3128 ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:http ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:https Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere ##.###.###.## DROP all -- anywhere ##.###.###.## ACCEPT all -- anywhere anywhere state NEW,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp spt:2199 ACCEPT udp -- anywhere anywhere udp spt:4817 ACCEPT udp -- anywhere anywhere udp spt:4819 ACCEPT udp -- anywhere anywhere udp spt:3199 Help gratefully appreciated.

  Read the article

• Using a second wifi router as a wireless bridge

  - by Greg-J

  I purchased a D-Link DGL-4500 to replace my aging WRT54G around a year ago, only to find it nowhere near as reliable. It's been collecting dust since. I'm wondering if there is a way to use it as a wireless bridge so I can connect it to my home network and then use it's ethernet ports to provide network access to several devices. Is this something that can be done? If not, are there devices meant for this? Any help would be appreciated.

  Read the article

• WiFi slow sometimes, reboot helps, how do I debug it?

  - by January

  Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

  Read the article

• How to synchronize users, passwords, hosts, etc without NIS

  - by joshxdr

  I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

  Read the article

< Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >