transaction log - Page 361

Accessing home directory hangs

- by Jeff

Occasionally my laptop will hang when trying to access my home directory. The only fix so far is to reboot and then it goes away for a week. /var/log/kern.log has the following error: Nov 21 13:54:39 Laptop1 kernel: [231480.428107] INFO: task ls:10104 blocked for more than 120 seconds. Nov 21 13:54:39 Laptop1 kernel: [231480.428114] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Nov 21 13:54:39 Laptop1 kernel: [231480.428120] ls D f5dbf6a0 0 10104 9964 0x00000004 Nov 21 13:54:39 Laptop1 kernel: [231480.428130] f3edbd40 00000086 00000001 f5dbf6a0 00000000 00000001 c175dfe0 c1868ec0 Nov 21 13:54:39 Laptop1 kernel: [231480.428145] c1868ec0 054eadaf 0000d250 f5005ec0 ee940cc0 f3e5b300 f3edbcf8 c10e8bfa Nov 21 13:54:39 Laptop1 kernel: [231480.428159] f3edbd10 f3edbd10 f3edbd10 c102b505 fffba7e8 089fa000 f3edbd38 c10fb528 Nov 21 13:54:39 Laptop1 kernel: [231480.428173] Call Trace: Nov 21 13:54:39 Laptop1 kernel: [231480.428189] [<c10e8bfa>] ? lru_cache_add_lru+0x2a/0x50 Nov 21 13:54:39 Laptop1 kernel: [231480.428199] [<c102b505>] ? __kunmap_atomic+0x75/0xa0 Nov 21 13:54:39 Laptop1 kernel: [231480.428207] [<c10fb528>] ? do_anonymous_page+0x1f8/0x280 Nov 21 13:54:39 Laptop1 kernel: [231480.428218] [<c152b656>] __mutex_lock_slowpath+0xc6/0x120 Nov 21 13:54:39 Laptop1 kernel: [231480.428225] [<c152b304>] mutex_lock+0x24/0x40 Nov 21 13:54:39 Laptop1 kernel: [231480.428246] [<f83ab87c>] cifs_reconnect_tcon+0x13c/0x2a0 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428255] [<c152fa00>] ? vmalloc_fault+0xee/0xee Nov 21 13:54:39 Laptop1 kernel: [231480.428262] [<c152fc2f>] ? do_page_fault+0x22f/0x4a0 Nov 21 13:54:39 Laptop1 kernel: [231480.428276] [<f83abe3c>] smb_init+0x2c/0x90 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428285] [<c11aa42e>] ? ext4_htree_store_dirent+0x2e/0x120 Nov 21 13:54:39 Laptop1 kernel: [231480.428301] [<f83b0941>] CIFSSMBQPathInfo+0x41/0x210 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428319] [<f83c39e4>] ? cifs_get_inode_info+0x224/0x390 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428336] [<f83c3a21>] cifs_get_inode_info+0x261/0x390 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428354] [<f83bb35d>] ? build_path_from_dentry+0xcd/0x250 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428362] [<c102b69e>] ? kmap_atomic_prot+0xde/0x100 Nov 21 13:54:39 Laptop1 kernel: [231480.428370] [<c152c4cd>] ? _raw_spin_lock+0xd/0x10 Nov 21 13:54:39 Laptop1 kernel: [231480.428388] [<f83c6378>] ? _GetXid+0x58/0x80 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428405] [<f83c4f81>] cifs_revalidate_dentry_attr+0x111/0x1a0 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428423] [<f83c50e2>] cifs_getattr+0x52/0x120 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428431] [<c112c5b2>] vfs_getattr+0x42/0x70 Nov 21 13:54:39 Laptop1 kernel: [231480.428448] [<f83c5090>] ? cifs_revalidate_dentry+0x40/0x40 [cifs] Nov 21 13:54:39 Laptop1 kernel: [231480.428455] [<c112c647>] vfs_fstatat+0x67/0x80 Nov 21 13:54:39 Laptop1 kernel: [231480.428461] [<c112c680>] vfs_lstat+0x20/0x30 Nov 21 13:54:39 Laptop1 kernel: [231480.428468] [<c112c946>] sys_lstat64+0x16/0x30 Nov 21 13:54:39 Laptop1 kernel: [231480.428475] [<c11341ed>] ? link_path_walk+0x79d/0x8a0 Nov 21 13:54:39 Laptop1 kernel: [231480.428483] [<c152c8e4>] syscall_call+0x7/0xb

Read the article

Looking under the hood of SSRS

- by Jim Giercyk

SSRS is a powerful tool, but there is very little available to measure it’s performance or view the SSRS execution log or catalog in detail. Here are a few simple queries that will give you insight to the system that you never had before. ACTIVE REPORTS: Have you ever seen your SQL Server performance take a nose dive due to a long-running report? If the SPID is executing under a generic Report ID, or it is a scheduled job, you may have no way to tell which report is killing your server. Running this query will show you which reports are executing at a given time, and WHO is executing them. USE ReportServerNative SELECT runningjobs.computername, runningjobs.requestname, runningjobs.startdate, users.username, Datediff(s,runningjobs.startdate, Getdate()) / 60 AS 'Active Minutes' FROM runningjobs INNER JOIN users ON runningjobs.userid = users.userid ORDER BY runningjobs.startdate SSRS CATALOG: We have all asked “What was the last thing that changed”, or better yet, “Who in the world did that!”. Here is a query that will show all of the reports in your SSRS catalog, when they were created and changed, and by who. USE ReportServerNative SELECT DISTINCT catalog.PATH, catalog.name, users.username AS [Created By], catalog.creationdate, users_1.username AS [Modified By], catalog.modifieddate FROM catalog INNER JOIN users ON catalog.createdbyid = users.userid INNER JOIN users AS users_1 ON catalog.modifiedbyid = users_1.userid INNER JOIN executionlogstorage ON catalog.itemid = executionlogstorage.reportid WHERE ( catalog.name <> '' ) SSRS EXECUTION LOG: Sometimes we need to know what was happening on the SSRS report server at a given time in the past. This query will help you do just that. You will need to set the timestart and timeend in the WHERE clause to suit your needs. USE ReportServerNative SELECT catalog.name AS report, executionlogstorage.username AS [User], executionlogstorage.timestart, executionlogstorage.timeend, Datediff(mi,e.timestart,e.timeend) AS ‘Time In Minutes', catalog.modifieddate AS [Report Last Modified], users.username FROM catalog (nolock) INNER JOIN executionlogstorage e (nolock) ON catalog.itemid = executionlogstorage.reportid INNER JOIN users (nolock) ON catalog.modifiedbyid = users.userid WHERE executionlogstorage.timestart >= Dateadd(s, -1, '03/31/2012') AND executionlogstorage.timeend <= Dateadd(DAY, 1, '04/02/2012') LONG RUNNING REPORTS: This query will show the longest running reports over a given time period. Note that the “>5” in the WHERE clause sets the report threshold at 5 minutes, so anything that ran less than 5 minutes will not appear in the result set. Adjust the threshold and start/end times to your liking. With this information in hand, you can better optimize your system by tweaking the longest running reports first. USE ReportServerNative SELECT executionlogstorage.instancename, catalog.PATH, catalog.name, executionlogstorage.username, executionlogstorage.timestart, executionlogstorage.timeend, Datediff(mi, e.timestart, e.timeend) AS 'Minutes', executionlogstorage.timedataretrieval, executionlogstorage.timeprocessing, executionlogstorage.timerendering, executionlogstorage.[RowCount], users_1.username AS createdby, CONVERT(VARCHAR(10), catalog.creationdate, 101) AS 'Creation Date', users.username AS modifiedby, CONVERT(VARCHAR(10), catalog.modifieddate, 101) AS 'Modified Date' FROM executionlogstorage e INNER JOIN catalog ON executionlogstorage.reportid = catalog.itemid INNER JOIN users ON catalog.modifiedbyid = users.userid INNER JOIN users AS users_1 ON catalog.createdbyid = users_1.userid WHERE ( e.timestart > '03/31/2012' ) AND ( e.timestart <= '04/02/2012' ) AND Datediff(mi, e.timestart, e.timeend) > 5 AND catalog.name <> '' ORDER BY 'Minutes' DESC I have used these queries to build SSRS reports that I can refer to quickly, and export to Excel if I need to report or quantify my findings. I encourage you to look at the data in the ReportServerNative database on your report server to understand the queries and create some of your own. For instance, you may want a query to determine which reports are using which shared data sources. Work smarter, not harder!

Read the article

Laptop monitor stopped working and can't be re-enabled on a Dell Latitude E6410

- by xektrum

I'm using Ubuntu 12.04 (upgraded from 11.10), everything seemed to work fine until today when my laptop monitor suddenly stopped working. Here are the facts: My laptop is a Dell Latitude E6410, Intel graphics. External Monitor is attached through a docking station. Everything worked fine for about 6-7 month, then upgraded to 12.04 Issue started today after a week of upgrade. I think the issue started after I ran CounterStrike 1.6, both monitors blinked and then only the attached monitor which is connected to a docking station continued to work I thought at first that was a transient issue but then I've rebooted, removed the battery but the same happens. Laptop Monitor and external monitor work fine up to login screen, but after I login it goes black Whenever I try to re-enable laptop monitor from Display Manager I get errors: The selected configuration for displays could not be applied could not set the configuration for CRTC 63 Not sure what technical details are required but here are some: $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected (normal left inverted right x axis y axis) 1440x900 60.0 + 40.0 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) $ tail /var/log/Xorg.0.log [ 8367.132] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.132] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy I'm using gnome-shell, and the only ways I've been able to get both display working have been: 1) Booting with laptop disconnected from docking and then re attach external with VGA instead of DVI, but only worked for a session. 2) Removing xserver-xorg-video-intel, but then I gnome-shell is gone as well as dri I would appreciate any suggestions. Regards, ============================= WORKAROUND FOUND ============================= So I have tried few things and here is what worked: I've installed a newer version of xserver-xorg-video-intel (2.19 vs 2.17) from ppa:xorg-edgers/ppa, it didn't work at first, it was only showing low graphics mode, so I tried with a different linux-image 3.0.0-19-generic-pae instead of 3.2.0-24-generic-pae, which I believe is 12.04 precise default, then everything started to work again, Now I've installed 3.4.0-1-generic-pae from same ppa and everything goes flawless so I believe the issue is either with linux-image 3.0.0-19-generic-pae or xserver-xorg-video-intel 2.17. Hope this helps someone in the future. PS: Now xrandr shows multiple modes for my laptop monitor $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 303mm x 189mm 1440x900 60.0*+ 59.9 40.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis)

Read the article

SQL Sentry Truth-Telling and Disk Configuration

- by AjarnMark

Recently, SQL Sentry told me something about my SQL Server disk configurations that I just didn’t want to believe, but alas, it was true. Several days ago I posted my First Impressions of the SQL Sentry Power Suite. Today’s post could fall into the category of, “Hey, as long as you have that fancy tool…” Unfortunately, it also falls into the category of an overloaded worker taking someone else’s word for the truth, not verifying it with independent fact-checking, and then making decisions based on that. Here’s my story… I’m not exactly an Accidental DBA (or Involuntary DBA as Paul Randal calls it). I came to this company five years ago as a lead application developer with extensive experience in database design and development. I worked my way into management, and along the way, took over the DBA responsibilities. Fortunately, our systems run pretty smoothly most of the time, but I’m always looking for ways to make them better and to fit into my understanding of best practices. When I took over as DBA, I inherited a SQL 2000 server with about 30 databases on it supporting our main systems, and a SQL 2005 server with multiple instances. Both of these servers were configured with the Operating System and Application files on the C drive, data files on a different drive letter, and log files on a third drive letter. Even before I took over as DBA, I verified that this was true with a previous server administrator, and that these represented actual separate disks. He stated that they did, and I thought that all was well. Then one day, I’m poking around inside the SQL Sentry Performance Advisor, checking out features as I am evaluating whether to purchase the product, and I come across a Disk Configuration section. The first thing I notice is that the drives do not have the proper partition offset, which was not at all surprising to me given the age of the installation and the relative newness of that topic. But what threw me for a loop was that the graphic display appeared to be telling me that I did not in fact have three separate drives (or arrays) but rather had two, and that the log files were merely on a separate volume on the same physical array as the OS. I figured that I must be reading it wrong so I scanned the Help file, but that just seemed to confirm my interpretation. Then I thought, “there must be something wrong with the demo version of the software! This can’t be right!” But just to double-check, I went to our current server admin to talk it over with him, and sure enough, SQL Sentry was telling the truth! I was stunned! I quickly went through the grieving process…denial…anger…reconciliation. Here was something that I thought was such a basic truth that was turned upside down. OK, granted, this wasn’t disastrous. Our databases didn’t suddenly grind to a halt. I didn’t get calls late at night inquiring about the sudden downturn in performance. But it was a bit of a shock to the system, in a good way, to jolt me out of taking what I had believed as the truth for granted, and instead to Trust, but Verify! Yes, before someone else points it out, I know that there are”free” disk management tools built-in to Windows that would have told me the same thing if I had only looked at them; I did not have to buy a fancy tool to tell me that, but the fact is, until I was evaluating the tool, I had just gone with what I was told, and never bothered to check what was actually there. So, what things do you believe to be true but you actually never verified?

Read the article

Upgrades in 5 Easy Pieces

- by Anne R.

Even though there are a few select tasks that I have to do once or twice a year, I can’t remember how to do them! Or where to find the bits and pieces to complete the task. So I love it when someone consolidates everything under one spot. That’s what the CRM On Demand team has done with the upgrade information. Specifically, they have: Provided a “one-stop” area for managing upgrades at your company. Broken down the upgrade process into 5 (yes, 5) steps. Explained when and how to perform each step with dates specific to your pod. Included details about each step, visible by expanding the step. Translated the steps into 11 languages. Added a list of release-specific resources with links from the page. Now, just head for the Training and Support portal, click the Release Info tab, and walk through the “5 Essential Steps to a Successful Upgrade.” Before you continue, though, select your language from the drop-down list on the Release Info page. CRM On Demand now has the upgrade steps translated into 11 languages. On the Step page, you can expand each section in sequence and follow the more detailed instructions that appear. This will ensure that you’ve covered all your bases for each upgrade. Here’s a shortened version of the information that you’ll find: 1. Verify your Primary Contact Information. Have you checked your primary contact information to make sure you’re being notified of all upgrade information? Or do you want more users to receive upgrade announcements? This section provides you with the navigation path to do that in CRM On Demand. 2. Review your Key Upgrade Dates. If you expand this step, a nice table appears with your critical dates for the various milestones. IMPORTANT: When your CRM On Demand pod has been officially added to the upgrade schedule, closer to the release date itself, this table will display your specific timetable. 3. Migrate your Customizations from the Staging Environment before the Snapshot Date. Oracle refreshes the Staging data with a copy of your Production data made on the Production Snapshot Date. So this section lists considerations relevant to this step. It also reminds you of the 2-week period when you should not be making any changes in your Staging environment. 4. Conduct your Upgrade Validation on the Staging Environment. When the Customer Validation Testing period begins, you need to log in to your Staging Environment to validate that your key business processes and customizations continue to behave as expected. If your company utilizes Web Services, Web Links, Web Applets or Workflow, focus on testing these first. You generally have about two weeks for testing. If you run into problems during this time, follow the instructions shown in this section for logging a service request. It describes exactly how to fill out the fields in the SR for the fastest resolution. 5. Conduct "White Glove" Testing in your Upgraded Production Environment. Before users start using the upgrade, you should access a few tabs and reports. Doing this actually warms up the cache so that frequently used pages and reports will come up at normal speed on Monday morning, when users log in to the upgraded system. Resources listed under this step help you in further preparing for the upgrade. Now there’s also a new Documentation section on the right with links to these release-specific resources. Very nice, I commented, when discussing these improvements with the “responsible party.” She confirmed that, yes, they tried to consolidate the upgrade information, translate it for better communication, simplify it into 5 easy pieces, and drive admins responsible for handling upgrades to this one site instead of sending out elaborate emails. Yes, I just love it when someone practically reaches out and holds my hand through a process. Next best thing to a wizard!

Read the article

javascript complex recurrsion [on hold]

- by Achilles

Given Below is my data in data array. What i am doing in code below is that from that given data i have to construct json in a special format which i also gave below. //code start here var hierarchy={}; hierarchy.name="Hierarchy"; hierarchy.children=[{"name":"","children":[{"name":"","children":[]}]}]; var countryindex; var flagExist=false; var data = [ {country :"America", city:"Kansas", employe:'Jacob'}, {country :"Pakistan", city:"Lahore", employe:'tahir'}, {country :"Pakistan", city:"Islamabad", employe:'fakhar'} , {country :"Pakistan", city:"Lahore", employe:'bilal'}, {country :"India", city:"d", employe:'ali'} , {country :"Pakistan", city:"Karachi", employe:'eden'}, {country :"America", city:"Kansas", employe:'Jeen'} , {country :"India", city:"Banglore", employe:'PP'} , {country :"India", city:"Banglore", employe:'JJ'} , ]; for(var i=0;i<data.length;i++) { for(var j=0;j<hierarchy.children.length;j++) { //for checking country match if(hierarchy.children[j].name==data[i].country) { countryindex=j; flagExist=true; break; } } if(flagExist)//country match now no need to add new country just add city in it { var cityindex; var cityflag=false; //hierarchy.children[countryindex].children.push({"name":data[i].city,"children":[]}) //if(hierarchy.children[index].children!=undefined) for(var k=0;k< hierarchy.children[countryindex].children.length;k++) { //for checking city match if(hierarchy.children[countryindex].children[k].name==data[i].city) { // hierarchy.children[countryindex].children[k].children.push({"name":data[i].employe}) cityflag=true; cityindex=k; break; } } if(cityflag)//city match now add just empolye at that city index { hierarchy.children[countryindex].children[cityindex].children.push({"name":data[i].employe}); cityflag=false; } else//no city match so add new with employe also as this is new city so its emplye will be 1st { hierarchy.children[countryindex].children.push({"name":data[i].city,children:[{"name":data[i].employe}]}); //same as above //hierarchy.children[countryindex].children[length-1].children.push({"name":data[i].employe}); } flagExist=false; } else{ //no country match adding new country //with city also as this is new city of new country console.log("sparta"); hierarchy.children.push({"name":data[i].country,"children":[{"name":data[i].city,"children":[{"name":data[i].employe}]}]}); // hierarchy.children.children.push({"name":data[i].city,"children":[]}); } //console.log(hierarchy); } hierarchy.children.shift(); var j=JSON.stringify(hierarchy); //code ends here //here is the json which i seccessfully formed from the code { "name":"Hierarchy", "children":[ { "name":"America", "children":[ { "name":"Kansas", "children":[{"name":"Jacob"},{"name":"Jeen"}]}]}, { "name":"Pakistan", "children":[ { "name":"Lahore", "children": [ {"name":"tahir"},{"name":"bilal"}]}, { "name":"Islamabad", "children":[{"name":"fakhar"}]}, { "name":"Karachi", "children":[{"name":"eden"}]}]}, { "name":"India", "children": [ { "name":"d", "children": [ {"name":"ali"}]}, { "name":"Banglore", "children":[{"name":"PP"},{"name":"JJ"}]}]}]} Now the orignal problem is that currently i am solving this problem for data of array of three keys and i have to go for 3 nested loops now i want to optimize this solution so that if data array of object has more than 3 key say 5 {country :"America", state:"NewYork",city:"newYOrk",street:"elm", employe:'Jacob'}, or more than my solution will not work and i cannot decide before how many keys will come so i thought recursion may suit best here. But i am horrible in writing recurrsion and the case is also complex. Can some awesome programmer help me writing recurrsion or suggest some other solution.

Read the article

How to get bearable 2D and 3D performance on AMD Radeon HD 6950?

- by l0b0

I have had an AMD Radeon HD 6950 (i.e., Cayman series) for a couple years now, and I have tried a lot of combinations of drivers and settings with terrible results. I'm completely at a loss as to how to proceed. The open source driver has much better 2D performance, but it offloads all OpenGL rendering to the CPU. What I've tried so far: All the latest stable Ubuntu releases in the period, plus one Linux Mint release. All the latest stable AMD Catalyst Proprietary Display Drivers, and currently 13.1. The unofficial wiki installation instructions for every Ubuntu version and the semi-official Ubuntu instructions. All the tips and tweaks I could find for Minecraft (Optifine, reducing settings to minimum), VLC (postprocessing at minimum, rendering at native video size), Catalyst Control Center (flipped every lever in there) and X11 (some binary toggles I can no longer remember). Results: Typically 13-15 FPS in Minecraft, 30 max (100+ in Windows with the same driver version). Around 10 FPS in Team Fortress 2 using the official Steam client. Choppy video playback, in Flash and with VLC. CPU use goes through the roof when rendering video (150% for 1080p on YouTube in Chromium, 100% for 1080p H264 in VLC). glxgears shows 12.5 FPS when maximized. fgl_glxgears shows 10 FPS when maximized. Hardware details from lshw: Motherboard ASUS P6X58D-E CPU Intel Core i7 CPU 950 @ 3.07GHz (never overclocked; 64 bit) 6 GB RAM Video card product "Cayman PRO [Radeon HD 6950]", vendor "Hynix Semiconductor (Hyundai Electronics)" 2 x 1920x1200 monitors, both connected with HDMI. I feel I must be missing something absolutely fundamental here. Is there no accelerated support for anything on 64-bit architectures? Does a dual monitor completely mess up the driver? $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6900 Series OpenGL version string: 4.2.11995 Compatibility Profile Context $ glxinfo | grep 'direct rendering' direct rendering: Yes I am currently using the open source driver, with the following results: Full frame rate and low CPU load when playing 1080p video. Black screen (but music in the background) in Team Fortress 2. Similar performance in Minecraft as the Catalyst driver. In hindsight obvious, since both end up offloading the rendering to the CPU. My /var/log/Xorg.0.log after upgrading to AMD Catalyst 13.1. Some possibly important lines: (WW) Falling back to old probe method for fglrx (WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found The generated xorg.conf. The disabled "monitor" 0-DFP9 is actually an A/V receiver, which sometimes confuses the monitor drivers when turned on/off (but not in Windows). All three "monitor" devices are connected with HDMI. Edit: Chris Carter's suggestion to use the xorg-edgers PPA (Catalyst 13.1) resulted in some improvement, but still pretty bad performance overall: Minecraft stabilizes at 13-17 FPS, but at least the CPU load is "only" at 45-60%. Still 150% CPU use for 1080p video rendering on YouTube in Chromium. Massive improvement for 1080p H264 in VLC: 40-50% CPU use and no visible jitter glxgears performance about doubled to 25-30 FPS when maximized. fgl_glxgears still at ~10 FPS when maximized.

Read the article

Why you shouldn't add methods to interfaces in APIs

- by Simon Cooper

It is an oft-repeated maxim that you shouldn't add methods to a publically-released interface in an API. Recently, I was hit hard when this wasn't followed. As part of the work on ApplicationMetrics, I've been implementing auto-reporting of MVC action methods; whenever an action was called on a controller, ApplicationMetrics would automatically report it without the developer needing to add manual ReportEvent calls. Fortunately, MVC provides easy hook when a controller is created, letting me log when it happens - the IControllerFactory interface. Now, the dll we provide to instrument an MVC webapp has to be compiled against .NET 3.5 and MVC 1, as the lowest common denominator. This MVC 1 dll will still work when used in an MVC 2, 3 or 4 webapp because all MVC 2+ webapps have a binding redirect redirecting all references to previous versions of System.Web.Mvc to the correct version, and type forwards taking care of any moved types in the new assemblies. Or at least, it should. IControllerFactory In MVC 1 and 2, IControllerFactory was defined as follows: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } So, to implement the logging controller factory, we simply wrap the existing controller factory: internal sealed class LoggingControllerFactory : IControllerFactory { private readonly IControllerFactory m_CurrentController; public LoggingControllerFactory(IControllerFactory currentController) { m_CurrentController = currentController; } public IController CreateController( RequestContext requestContext, string controllerName) { // log the controller being used FeatureSessionData.ReportEvent("Controller used:", controllerName); return m_CurrentController.CreateController(requestContext, controllerName); } public void ReleaseController(IController controller) { m_CurrentController.ReleaseController(controller); } } Easy. This works as expected in MVC 1 and 2. However, in MVC 3 this type was throwing a TypeLoadException, saying a method wasn't implemented. It turns out that, in MVC 3, the definition of IControllerFactory was changed to this: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); SessionStateBehavior GetControllerSessionBehavior( RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } There's a new method in the interface. So when our MVC 1 dll was redirected to reference System.Web.Mvc v3, LoggingControllerFactory tried to implement version 3 of IControllerFactory, was missing the GetControllerSessionBehaviour method, and so couldn't be loaded by the CLR. Implementing the new method Fortunately, there was a workaround. Because interface methods are normally implemented implicitly in the CLR, if we simply declare a virtual method matching the signature of the new method in MVC 3, then it will be ignored in MVC 1 and 2 and implement the extra method in MVC 3: internal sealed class LoggingControllerFactory : IControllerFactory { ... public virtual SessionStateBehaviour GetControllerSessionBehaviour( RequestContext requestContext, string controllerName) {} ... } However, this also has problems - the SessionStateBehaviour type only exists in .NET 4, and we're limited to .NET 3.5 by support for MVC 1 and 2. This means that the only solutions to support all MVC versions are: Construct the LoggingControllerFactory type at runtime using reflection Produce entirely separate dlls for MVC 1&2 and MVC 3. Ugh. And all because of that blasted extra method! Another solution? Fortunately, in this case, there is a third option - System.Web.Mvc also provides a DefaultControllerFactory type that can provide the implementation of GetControllerSessionBehaviour for us in MVC 3, while still allowing us to override CreateController and ReleaseController. However, this does mean that LoggingControllerFactory won't be able to wrap any calls to GetControllerSessionBehaviour. This is an acceptable bug, given the other options, as very few developers will be overriding GetControllerSessionBehaviour in their own custom controller factory. So, if you're providing an interface as part of an API, then please please please don't add methods to it. Especially if you don't provide a 'default' implementing type. Any code compiled against the previous version that can't be updated will have some very tough decisions to make to support both versions.

Read the article

It's like I'm in recovery mode after update, but I'm not

- by mawburn

I used the Ubuntu software updater and updated to the most recent packages. After the last update today, it's like I have gone into recovery mode, but I haven't. I am running UbuntuGNOME First, everything looks like this: Switching to dark mode does nothing. Also, default applications do not work. Such as Startup and the default screenshot application. Everything was working fine before the latest software update. System Info Ubuntu 14.04 LTS Gnome-Shell 3.10.4 Kernel 3.13.0-29 I can't figure out how to get an update history, but this is almost a fresh install. It's about a week old install and this is the 3rd time I've used the Ubuntu Software Update. I am running AMD ATI HD6700 with the proprietary Catalyst drivers. I tried to provide all information that I thought would be useful, if you need any more please let me know. Edit - I believe something went wrong within these updates: Update Log: Start-Date: 2014-06-09 19:07:07 Commandline: aptdaemon role='role-commit-packages' sender=':1.68' Install: libgnome-desktop-3-10:amd64 (3.12.0-0~eugenesan~trusty2) Upgrade: gnome-session-common:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gnome-session-bin:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gir1.2-gnomedesktop-3.0:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), gnome-session:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), python-libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libspice-server1:amd64 (0.12.4-0nocelt2, 0.12.4-0nocelt2.02~eugenesan~trusty1), gir1.2-mutter-3.0:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), xserver-xorg-video-qxl:amd64 (0.1.1-0ubuntu3, 0.1.1-0ubuntu3.01), libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libxml2:i386 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), gnome-desktop3-data:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), mutter:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), mutter-common:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), libxml2-utils:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libmutter0c:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1) End-Date: 2014-06-09 19:07:12 I also installed Citrix Receiver today, following the tutorial here: Citrix Receiver 12.1 on Ubuntu 14.04 64-bit Log Start-Date: 2014-06-09 18:59:06 Commandline: apt-get install libmotif4:i386 nspluginwrapper lib32z1 libc6-i386 libxp6:i386 libxpm4:i386 libasound2:i386 Install: libmotif-common:amd64 (2.3.4-5, automatic), libatk1.0-0:i386 (2.10.0-2ubuntu2, automatic), libxft2:i386 (2.3.1-2, automatic), libgraphite2-3:i386 (1.2.4-1ubuntu1, automatic), nspluginviewer:i386 (1.4.4-0ubuntu5, automatic), libpango-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcursor1:i386 (1.1.14-1, automatic), libmotif4:i386 (2.3.4-5), libxm4:amd64 (2.3.4-5, automatic), libxm4:i386 (2.3.4-5, automatic), libxp6:i386 (1.0.2-1ubuntu1), libpangocairo-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcb-render0:i386 (1.10-2ubuntu1, automatic), libthai0:i386 (0.1.20-3, automatic), libharfbuzz0b:i386 (0.9.27-1, automatic), libpixman-1-0:i386 (0.30.2-2ubuntu1, automatic), libpangoft2-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libcairo2:i386 (1.13.0~20140204-0ubuntu1, automatic), lib32z1:amd64 (1.2.8.dfsg-1ubuntu1), libjasper1:i386 (1.900.1-14ubuntu3, automatic), libgtk2.0-0:i386 (2.24.23-0ubuntu1.1, automatic), nspluginwrapper:amd64 (1.4.4-0ubuntu5), libuil4:amd64 (2.3.4-5, automatic), libuil4:i386 (2.3.4-5, automatic), libxcb-shm0:i386 (1.10-2ubuntu1, automatic), libxmu6:i386 (1.1.1-1, automatic), libc6-i386:amd64 (2.19-0ubuntu6), libxinerama1:i386 (1.1.3-1, automatic), libgdk-pixbuf2.0-0:i386 (2.30.7-0ubuntu1, automatic), libxcomposite1:i386 (0.4.4-1, automatic), libmrm4:amd64 (2.3.4-5, automatic), libmrm4:i386 (2.3.4-5, automatic), libdatrie1:i386 (0.2.8-1, automatic), libxrandr2:i386 (1.4.2-1, automatic), libxpm4:i386 (3.5.10-1) End-Date: 2014-06-09 18:59:11

Read the article

HPCM 11.1.2.2.x - HPCM Standard Costing Generating >99 Calc Scipts

- by Jane Story

HPCM Standard Profitability calculation scripts are named based on a documented naming convention. From 11.1.2.2.x, the script name = a script suffix (1 letter) + POV identifier (3 digits) + Stage Order Number (1 digit) + “_” + index (2 digits) (please see documentation for more information (http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_admin/apes01.html). This naming convention results in the name being 8 characters in length i.e. the maximum number of characters permitted calculation script names in non-unicode Essbase BSO databases. The index in the name will indicate the number of scripts per stage. In the vast majority of cases, the number of scripts generated per stage will be significantly less than 100 and therefore, there will be no issue. However, in some cases, the number of scripts generated can exceed 99. It is unusual for an application to generate more than 99 calculation scripts for one stage. This may indicate that explicit assignments are being extensively used. An assessment should be made of the design to see if assignment rules can be used instead. Assignment rules will reduce the need for so many calculation script lines which will reduce the requirement for such a large number of calculation scripts. In cases where the scripts generates exceeds 100, the length of the name of the 100th calculation script is different from the 99th as the calculation script name changes from being 8 characters long and becomes 9 characters long (e.g. A6811_100 rather than A6811_99). A name of 9 characters is not permitted in non Unicode applications. It is “too long”. When this occurs, an error will show in the hpcm.log as “Error processing calculation scripts” and “Unexpected error in business logic “. Further down the log, it is possible to see that this is “Caused by: Error copying object “ and “Caused by: com.essbase.api.base.EssException: Cannot put olap file object ... object name_[<calc script name> e.g. A6811_100] too long for non-unicode mode application”. The error file will give the name of the calculation script which is causing the issue. In my example, this is A6811_100 and you can see this is 9 characters in length. It is not possible to increase the number of characters allowed in a calculation script name. However, it is possible to increase the size of each calculation script. The default for an HPCM application, set in the preferences, is set to 4mb. If the size of each calculation script is larger, the number of scripts generated will reduce and, therefore, less than 100 scripts will be generated which means that the name of the calculation script will remain 8 characters long. To increase the size of the generated calculation scripts for an application, in the HPM_APPLICATION_PREFERENCE table for the application, find the row where HPM_PREFERENCE_NAME_ID=20. The default value in this row is 4194304. This can be increased e.g. 7340032 will increase this to 7mb. Please restart the profitability service after making the change.

Read the article

DISA Cross Domain Enterprise Solutions on the NetBeans Platform

- by Geertjan

Bray 2.0 is a tool based on the NetBeans Platform that assists in creating valid Data Flow Configuration (DFC) files. The DFC Specification was developed to provide a standardized way for defining, validating, and approving data flows for use on cross-domain guarding solutions. A DFC document specifies key entities such as security domains, guards that facilitate data between security domains, data flows that describe how data travels between security domains, filters that transform and validate the data and more. Related info: http://www.disa.mil/Services/Information-Assurance/Cross-Domain-Solutions The Bray product is in development at Fulcrum IT (http://www.fulcrumco.com). The DFC Specification and Bray were developed in support of the US Department of Defense. Bray 2.0 marks the first release of Bray on the NetBeans Platform and utilizes a number of features that are core to the NetBeans Platform: Modular plugability. Bray consumers can integrate their own tools, file types, and more into the product with relative ease. Robust UI. The NetBeans Platform intuitive UI makes it easy to access and manipulate multiple aspects of a DFC. Explorer. The Explorer is a key component that makes the DFC XML easy to traverse, edit, and find errors. Context-sensitive help. JavaHelp can be readily integrated for the product as well as all the UI within. Editors. Any external file can be added to a DFC. Users can register their own editors or use the provided NetBeans editors to edit files. Printing. The NetBeans Platform Print API makes it easy to determine what should be printed and how. A screenshot: Bray 2.0 provides a lot of key features in developing valid, robust DFC files: XML validation. A DFC can be validated against the DFC schema specification. DFC Check List. An interactive, minimal guide for creating a complete DFC. Summary Window. The Summary Window functions like the Navigator in NetBeans IDE. The current "item of interest" is checked against various business rules and provides the ability to quickly find and fix errors. Change Log. Bray audits every change to a DFC and places them in a change log for users to peruse. Comments. Users can optionally add comments for other users to see. Digital signatures. DFC files can be digitally signed. A signature history and signature validation is provided in Bray. Pluggable security schemes. Bray ships with plain text and IC-ISM security schemes. If needed, users can integrate additional ones. ...and more to come! New features for Bray are constantly in development including use of the NetBeans Visual Library, language support, and more. More screenshots:

Read the article

Design pattern for logging changes in parent/child objects saved to database

- by andrew

I’ve got a 2 database tables in parent/child relationship as one-many. I’ve got three classes representing the data in these two tables: Parent Class { Public int ID {get; set;} .. other properties } Child Class { Public int ID {get;set;} Public int ParentID {get; set;} .. other properties } TogetherClass { Public Parent Parent; Public List<Child> ChildList; } Lastly I’ve got a client and server application – I’m in control of both ends so can make changes to both programs as I need to. Client makes a request for ParentID and receives a Together Class for the matching parent, and all of the child records. The client app may make changes to the children – add new children, remove or modify existing ones. Client app then sends the Together Class back to the server app. Server app needs to update the parent and child records in the database. In addition I would like to be able to log the changes – I’m doing this by having 2 separate tables one for Parent, one for child; each containing the same columns as the original plus date time modified, by whom and a list of the changes. I’m unsure as to the best approach to detect the changes in records – new records, records to be deleted, records with no fields changed, records with some fields changed. I figure I need to read the parent & children records and compare those to the ones in the Together Class. Strategy A: If Together class’s child record has an ID of say 0, that indicates a new record; insert. Any deleted child records are no longer in the Together Class; see if any of the comparison child records are not found in the Together class and delete if not found (Compare using ID). Check each child record for changes and if changed log. Strategy B: Make a new Updated TogetherClass UpdatedClass { Public Parent Parent {get; set} Public List<Child> ListNewChild {get;set;} Public List<Child> DeletedChild {get;set;} Public List<Child> ExistingChild {get;set;} // used for no changes and modified rows } And then process as per the list. The reason why I’m asking for ideas is that both of these solutions don’t seem optimal to me and I suspect this problem has been solved already – some kind of design pattern ? I am aware of one potential problem in this general approach – that where Client App A requests a record; App B requests same record; A then saves changes; B then saves changes which may overwrite changes A made. This is a separate locking issue which I’ll raise a separate question for if I’ve got trouble implementing. The actual implementation is c#, SQL Server and WCF between client and server - sharing a library containing the class implementations. Apologies if this is a duplicate post – I tried searching various terms without finding a match though.

Read the article

(libgdx) Button doesn't work

- by StercoreCode

At the game I choose StopScreen. At this screen displays button. But if I click it - it doesn't work. What I expect - when I press button it must restart game. At this stage must display at least a message that the button is pressed. I tried to create new and clear project. Main class implement ApplicationListener. I put the same code in the appropriate methods. And it's works! But if i create this button in my game - it doesn't work. When i play and go to the StopScreen, i saw button. But if i click, or touch, nothing happens. I think that the proplem at the InputListener, although i set the stage as InputProcessor. Gdx.input.setInputProcessor(stage); I also try to addListener for Button as ClickListener. But it gave no results. Or it maybe problem that i implements Screen method - not ApplicationListener or Game. But if StopScreen implement ApplicationListener, at the mainGame I can't to setScreen. Just interests question: why button displays but nothing happens to it? Here is the code of StopScreen if it helps find my mistake: public class StopScreen implements Screen{ private OrthographicCamera camera; private SpriteBatch batch; public Stage stage; //** stage holds the Button **// private BitmapFont font; //** same as that used in Tut 7 **// private TextureAtlas buttonsAtlas; //** image of buttons **// private Skin buttonSkin; //** images are used as skins of the button **// public TextButton button; //** the button - the only actor in program **// public StopScreen(CurrusGame currusGame) { camera = new OrthographicCamera(); camera.setToOrtho(false, 800, 480); batch = new SpriteBatch(); buttonsAtlas = new TextureAtlas("button.pack"); //** button atlas image **// buttonSkin = new Skin(); buttonSkin.addRegions(buttonsAtlas); //** skins for on and off **// font = AssetLoader.font; //** font **// stage = new Stage(); stage.clear(); Gdx.input.setInputProcessor(stage); TextButton.TextButtonStyle style = new TextButton.TextButtonStyle(); style.up = buttonSkin.getDrawable("ButtonOff"); style.down = buttonSkin.getDrawable("ButtonOn"); style.font = font; button = new TextButton("PRESS ME", style); //** Button text and style **// button.setPosition(100, 100); //** Button location **// button.setHeight(100); //** Button Height **// button.setWidth(100); //** Button Width **// button.addListener(new InputListener() { public boolean touchDown(InputEvent event, float x, float y, int pointer, int button) { Gdx.app.log("my app", "Pressed"); return true; } public void touchUp(InputEvent event, float x, float y, int pointer, int button) { Gdx.app.log("my app", "Released"); } }); stage.addActor(button); } @Override public void render(float delta) { Gdx.gl.glClearColor(0, 1, 0, 1); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); stage.act(); batch.setProjectionMatrix(camera.combined); batch.begin(); stage.draw(); batch.end(); }

Read the article

Oracle GoldenGate 11g Release 2 Launch Webcast Replay Available

- by Irem Radzik

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} For those of you who missed Oracle GoldenGate 11g Release 2 launch webcasts last week, the replay is now available from the following url. Harnessing the Power of the New Release of Oracle GoldenGate 11g I would highly recommend watching the webcast to meet many new features of the new release and hear the product management team respond to the questions from the audience in a nice long Q&A section. In my blog last week I listed the media coverage for this new release. There is a new article published by ITJungle talking about Oracle GoldenGate’s heterogeneity and support for DB2 for iSeries: Oracle Completes DB2/400 Support in Data Replication Tool As mentioned in last week’s blog, we received over 150 questions from the audience and in this blog I'd like to continue to post some of the frequently asked, questions and their answers: Question: What are the fundamental differences between classic data capture and integrated data capture? Do both use the redo logs in the source database? Answer: Yes, they both use redo logs. Classic capture parses the redo log data directly, whereas the Integrated Capture lets the Oracle database parse the redo log record using an internal API. Question: Does GoldenGate version need to match Oracle Database version? Answer: No, they are not directly linked. Oracle GoldenGate 11g Release 2 supports Oracle Database version 10gR2 as well. For Oracle Database version 10gR1 and Oracle Database version 9i you will need GoldenGate11g Release 1 or lower. And for Oracle Database 8i you need Oracle GoldenGate 10 or earlier versions. Question: If I already use Data Guard, do I need GoldenGate? Answer: Data Guard is designed as the best disaster recovery solution for Oracle Database. If you would like to implement a bidirectional Active-Active replication solution or need to move data between heterogeneous systems, you will need GoldenGate. Question: On Compression and GoldenGate, if the source uses compression, is it required that the target also use compression? Answer: No, the source and target do not need to have the same compression settings. Question: Does GG support Advance Security Option on the Source database? Answer: Yes it does. Question: Can I use GoldenGate to upgrade the Oracle Database to 11g and do OS migration at the same time? Answer: Yes, this is a very common project where GoldenGate can eliminate downtime, give flexibility to test the target as needed, and minimize risks with fail-back option to the old environment. For more information on database upgrades please check out the following white papers: Best Practices for Migrating/Upgrading Oracle Database Using Oracle GoldenGate 11g Zero-Downtime Database Upgrades Using Oracle GoldenGate Question: Does GoldenGate create any trigger in the source database table level or row level to for real-time data integration? Answer: No, GoldenGate does not create triggers. Question: Can transformation be done after insert to destination table or need to be done before? Answer: It can happen in the Capture (Extract) process, in the Delivery (Replicat) process, or in the target database. For more resources on Oracle GoldenGate 11gR2 please check out our Oracle GoldenGate 11gR2 resource kit as well.

Read the article

Scenarios for Throwing Exceptions

- by Joe Mayo

I recently came across a situation where someone had an opinion that differed from mine of when an exception should be thrown. This particular case was an issue opened on LINQ to Twitter for an Exception on EndSession. The premise of the issue was that the poster didn’t feel an exception should be raised, regardless of authentication status. As first, this sounded like a valid point. However, I went back to review my code and decided not to make any changes. Here's my rationale: 1. The exception doesn’t occur if the user is authenticated when EndAccountSession is called. 2. The exception does occur if the user is not authenticated when EndAccountSession is called. 3. The exception represents the fact that EndAccountSession is not able to fulfill its intended purpose - to end the session. If a session never existed, then it would not be possible to perform the requested action. Therefore, an exception is appropriate. To help illustrate how to handle this situation, I've modified the following code in Program.cs in the LinqToTwitterDemo project to illustrate the situation: static void EndSession(ITwitterAuthorizer auth) { using (var twitterCtx = new TwitterContext(auth, "https://api.twitter.com/1/", "https://search.twitter.com/")) { try { //Log twitterCtx.Log = Console.Out; var status = twitterCtx.EndAccountSession(); Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } catch (TwitterQueryException tqe) { var webEx = tqe.InnerException as WebException; if (webEx != null) { var webResp = webEx.Response as HttpWebResponse; if (webResp != null && webResp.StatusCode == HttpStatusCode.Unauthorized) Console.WriteLine("Twitter didn't recognize you as having been logged in. Therefore, your request to end session is illogical.\n"); } var status = tqe.Response; Console.WriteLine("Request: {0}, Error: {1}" , status.Request , status.Error); } } } As expected, LINQ to Twitter wraps the exception in a TwitterQueryException as the InnerException. The TwitterQueryException serves a very useful purpose through it's Response property. Notice in the example above that the response has Request and Error proprieties. These properties correspond to the information that Twitter returns as part of it's response payload. This is often useful while debugging to help you understand why Twitter was unable to perform the requested action. Other times, it's cryptic, but that's another story. At least you have some way of knowing in your code how to anticipate and handle these situations, along with having extra information to debug with. To sum things up, there are two points to make: when and why an exception should be raised and when to wrap and re-throw an exception in a custom exception type. I felt it was necessary to allow the exception to be raised because the called method was unable to perform the task it was designed for. I also felt that it is inappropriate for a general library to do anything with exceptions because that could potentially hide a problem from the caller. A related point is that it should be the exclusive decision of the application that uses the library on what to do with an exception. Another aspect of this situation is that I wrapped the exception in a custom exception and re-threw. This is a tough call because I don’t want to hide any stack trace information. However, the need to make the exception more meaningful by including vital information returned from Twitter swayed me in the direction to design an interface that was as helpful as possible to library consumers. As shown in the code above, you can dig into the exception and pull out a lot of good information, such as the fact that the underlying HTTP response was a 401 Unauthorized. In all, trade-offs are seldom perfect for all cases, but combining the fact that the method was unable to perform its intended function, this is a library, and the extra information can be more helpful, it seemed to be the better design. @JoeMayo

Read the article

SR Activity Summaries Via Direct Email? You Bet!

- by PCat

Courtesy of Ken Walker. I’m a “bottom line” kind of guy. My friends and co-workers will tell you that I’m a “Direct Communicator” when it comes to work or my social life. For example, if I were to come up with a fantastic new recipe for a low-fat pan fried chicken, I’d Tweet, email, or find a way to blast the recipe directly to you so that you could enjoy it immediately. My friends would see the subject, “Awesome New Fried Chicken” and they’d click and see the recipe there before them.Others are “Indirect Communicators.” My friend Joel is like this. He would post the recipe in his blog, and then Tweet or email a link back to his blog with a subject, “Fried Chicken.” Then Joel would sit back and expect his friends to read the email, AND click the link to his blog, and then read the recipe. As a fan of the “Direct” method, I wish there was a way for me to “Opt-in” for immediate updates from Joel so I could see the recipe without having to click over to his blog to search for it.The same is true for MOS. If you’ve ever opened a Service Request through My Oracle Support (MOS), you know that most of the communication between you and the Oracle Support Engineer with respect to the issue in the SR, is done via email. Which type of email would you rather receive in your email account? Example1:Your SR has been updated. Click HERE to see the update. Or Example2:Your SR has been updated. Here is the update: “Hi John, Oracle Development has completed the patch we’ve been waiting for! Here’s a direct “LINK” to the patch that should resolve your issue. Please download and install the patch via the instructions (included with the link) and let me know if it does, in fact, resolve your issue!”Example2 is available to you! All you need to do is to “Opt-In” for the direct email updates. The default is for the indirect update as seen in Example1. To turn on “Service Request Details in Email” simply follow these instructions (aided by the screenshot below):1. Log into MOS, and click on your name in the upper right corner. Select “My Account.”2. Make sure “My Account” is highlighted in bold on the left.3. Turn ON, “Service Request Details in Email” That’s it! You will now receive the SR Updates, directly in your email account without having to log into MOS, click the SR, scroll down to the updates, etc. That’s better than Fried Chicken! (Well; almost better....).

Read the article

Get More From Your Service Request

- by Get Proactive Customer Adoption Team

Leveraging Service Request Best Practices Use best practices to get there faster. In the daily conversations I have with customers, they sometimes express frustration over their Service Requests. They often feel powerless to make needed changes, so their sense of frustration grows. To help you avoid some of the frustration you might feel in dealing with your Service Requests (SR), here are a few pointers that come from our best practice discussions. Be proactive. If you can anticipate some of the questions that Support will ask, or the information they may need, try to provide this up front, when you log the SR. This could be output from the Remote Diagnostic Agent (RDA), if this is a database issue, or the output from another diagnostic tool, if you’re an EBS customer. Any information you can supply that helps us understand the situation better, helps us resolve the issue sooner. As you use some of these tools proactively, you might even find the solution to the problem before you log an SR! Be right. Make sure you have the correct severity level. Since you select the initial severity level, it’s easy to accept the default without considering how significant this may be. Business impact is the driving factor, so make sure you take a moment to select the severity level that is appropriate to the situation. Also, make sure you ask us to change the severity level, should the situation dictate. Be responsive! If this is an important issue to you, quickly follow up on any action plan submitted to you by Oracle Support. The support engineer assigned to your Service Request will be able to move the issue forward more aggressively when they have the needed information. This is crucial in resolving your issues in a timely manner. Be thorough. If there are five questions in the action plan, make sure you provide an answer for all five questions in one response, rather than trickling them in one at a time. This will allow the engineer to look at all of the information as a whole and to avoid multiple trips to your SR, saving valuable time and getting you a resolution sooner. Be your own advocate! You know your situation best; make sure Oracle Support understands both how and why this issue is important to you and your company. Use the escalation process if you're concerned that your SR isn't going the right direction, the right pace, or through the right person. Don't wait until you're frustrated and angry. An escalation is as simple as a quick conversation on the phone and can be amazingly effective in getting your issues back on track. The support manager you speak with is empowered to make any needed changes. Be our partner. You can make your support experience better. When your SR has been resolved, you may receive a survey request. This is intended to get your feedback about how your SR went and what we can do to improve your overall support experience. Oracle Support is here to help you. Our goal with any Service Request is to provide the best possible solution as quickly as possible. With your help, we’ll be able to do this with your Service Request too.

Read the article

Welcome to BlogEngine.NET 2.9 using Microsoft SQL Server

If you see this post it means that BlogEngine.NET 2.9 is running and the hard part of creating your own blog is done. There is only a few things left to do. Write Permissions To be able to log in to the blog and writing posts, you need to enable write permissions on the App_Data folder. If you’re blog is hosted at a hosting provider, you can either log into your account’s admin page or call the support. You need write permissions on the App_Data folder because all posts, comments, and blog attachments are saved as XML files and placed in the App_Data folder. If you wish to use a database to to store your blog data, we still encourage you to enable this write access for an images you may wish to store for your blog posts. If you are interested in using Microsoft SQL Server, MySQL, SQL CE, or other databases, please see the BlogEngine wiki to get started. Security When you've got write permissions to the App_Data folder, you need to change the username and password. Find the sign-in link located either at the bottom or top of the page depending on your current theme and click it. Now enter "admin" in both the username and password fields and click the button. You will now see an admin menu appear. It has a link to the "Users" admin page. From there you can change the username and password. Passwords are hashed by default so if you lose your password, please see the BlogEngine wiki for information on recovery. Configuration and Profile Now that you have your blog secured, take a look through the settings and give your new blog a title. BlogEngine.NET 2.9 is set up to take full advantage of of many semantic formats and technologies such as FOAF, SIOC and APML. It means that the content stored in your BlogEngine.NET installation will be fully portable and auto-discoverable. Be sure to fill in your author profile to take better advantage of this. Themes, Widgets & Extensions One last thing to consider is customizing the look of your blog. We have a few themes available right out of the box including two fully setup to use our new widget framework. The widget framework allows drop and drag placement on your side bar as well as editing and configuration right in the widget while you are logged in. Extensions allow you to extend and customize the behaivor of your blog. Be sure to check the BlogEngine.NET Gallery at dnbegallery.org as the go-to location for downloading widgets, themes and extensions. On the web You can find BlogEngine.NET on the official website. Here you'll find tutorials, documentation, tips and tricks and much more. The ongoing development of BlogEngine.NET can be followed at CodePlex where the daily builds will be published for anyone to download. Again, new themes, widgets and extensions can be downloaded at the BlogEngine.NET gallery. Good luck and happy writing. The BlogEngine.NET team

Read the article

Gnome-shell fails to load on 12.10

- by Githlar

I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

Read the article

MySQL Server 5.6 defaults changes

- by user12626240

We're improving the MySQL Server defaults, as announced by Tomas Ulin at MySQL Connect. Here's what we're changing: Setting Old New Notes back_log 50 50 + ( max_connections / 5 ) capped at 900 binlog_checksum off CRC32 New variable in 5.6 binlog_row_event_max_size 1k 8k flush_time 1800 Windows changes from 1800 to 0 Was already 0 on other platforms host_cache_size 128 128 + 1 for each of the first 500 max_connections + 1 for every 20 max_connections over 500, capped at 2000 New variable in 5.6 innodb_autoextend_increment 8 64 Now affects *.ibd files. 64 is 64 megabytes innodb_buffer_pool_instances 0 8. On 32 bit Windows only, if innodb_buffer_pool_size is greater than 1300M, default is innodb_buffer_pool_size / 128M innodb_concurrency_tickets 500 5000 innodb_file_per_table off on innodb_log_file_size 5M 48M InnoDB will always change size to match my.cnf value. Also see innodb_log_compressed_pages and binlog_row_image innodb_old_blocks_time 0 1000 1 second innodb_open_files 300 300; if innodb_file_per_table is ON, higher of table_open_cache or 300 innodb_purge_batch_size 20 300 innodb_purge_threads 0 1 innodb_stats_on_metadata on off join_buffer_size 128k 256k max_allowed_packet 1M 4M max_connect_errors 10 100 open_files_limit 0 5000 See note 1 query_cache_size 0 1M query_cache_type on/1 off/0 sort_buffer_size 2M 256k sql_mode none NO_ENGINE_SUBSTITUTION See later post about default my.cnf for STRICT_TRANS_TABLES sync_master_info 0 10000 Recommend: master_info_repository=table sync_relay_log 0 10000 sync_relay_log_info 0 10000 Recommend: relay_log_info_repository=table. Also see Replication Relay and Status Logs table_definition_cache 400 400 + table_open_cache / 2, capped at 2000 table_open_cache 400 2000 Also see table_open_cache_instances thread_cache_size 0 8 + max_connections/100, capped at 100 Note 1: In 5.5 there was already a rule to make open_files_limit 10 + max_connections + table_cache_size * 2 if that was higher than the user-specified value. Now uses the higher of that and (5000 or what you specify). We are also adding a new default my.cnf file and guided instructions on the key settings to adjust. More on this in a later post. We're also providing a page with suggestions for settings to improve backwards compatibility. The old example files like my-huge.cnf are obsolete. Some of the improvements are present from 5.6.6 and the rest are coming. These are ideas, and until they are in an official GA release, they are subject to change. As part of this work I reviewed every old server setting plus many hundreds of emails of feedback and testing results from inside and outside Oracle's MySQL Support team and the many excellent blog entries and comments from others over the years, including from many MySQL Gurus out there, like Baron, Sheeri, Ronald, Schlomi, Giuseppe and Mark Callaghan. With these changes we're trying to make it easier to set up the server by adjusting only a few settings that will cause others to be set. This happens only at server startup and only applies to variables where you haven't set a value. You'll see a similar approach used for the Performance Schema. The Gurus don't need this but for many newcomers the defaults will be very useful. Possibly the most unusual change is the way we vary the setting for innodb_buffer_pool_instances for 32-bit Windows. This is because we've found that DLLs with specified load addresses often fragment the limited four gigabyte 32-bit address space and make it impossible to allocate more than about 1300 megabytes of contiguous address space for the InnoDB buffer pool. The smaller requests for many pools are more likely to succeed. If you change the value of innodb_log_file_size in my.cnf you will see a message like this in the error log file at the next restart, instead of the old error message: [Warning] InnoDB: Resizing redo log from 2*64 to 5*128 pages, LSN=5735153 One of the biggest challenges for the defaults is the millions of installations on a huge range of systems, from point of sale terminals and routers though shared hosting or end user systems and on to major servers with lots of CPU cores, hundreds of gigabytes of RAM and terabytes of fast disk space. Our past defaults were for the smaller systems and these change that to larger shared hosting or shared end user systems, still with a bias towards the smaller end. There is a bias in favour of OLTP workloads, so reporting systems may need more changes. Where there is a conflict between the best settings for benchmarks and normal use, we've favoured production, not benchmarks. We're very interested in your feedback, comments and suggestions.

Read the article

Application Logging needs work

Application Logging Application logging is the act of logging events that occur within an application much like how a court report documents what happens in court case. Application logs can be useful for several reasons, but the most common use for logs is to recreate steps to find the root cause of applications errors. Other uses can include the detection of Fraud, verification of user activity, or provide audits on user/data interactions. “Logs can contain different kinds of data. The selection of the data used is normally affected by the motivation leading to the logging. “ (OWASP, 2009) OWASP also stats that logging include applicable debugging information like the event date time, responsible process, and a description of the event. “There are many reasons why a logging system is a necessary part of delivering a distributed application. One of the most important is the ability to track exactly how many users are using the application during different time periods.” (Hatton, 2000) Hatton also states that application logging helps system designers determine whether parts of an application aren't being used as designed. He implies that low usage can be used to identify if users like or do not like aspects of a system based on user usage of the application. This enables application designers to extract why users don't like aspects of an application so that changes can be made to increase its usefulness and effectiveness. “Logging memory usage can also assist you in tuning up the internals of your application. If you're experiencing a randomly occurring problem, being able to match activities performed with the memory status at the time may enable you to discover the cause of the problem. It also gives you a good indication of the health of the distributed server machine at the time any activity is performed. “ (Hatton, 2000) Commonly Logged Application Events (Defined by OWASP) Access of Data Creation of Data Modification of Data in any form Administrative Functions Configuration Changes Debugging Information(Application Events) Authorization Attempts Data Deletion Network Communication Authentication Events Errors/Exceptions Application Error Logging The functionality associated with application error logging is actually the combination of proper error handling and applications logging. If we look back at Figure 4 and Figure 5, these code examples allow developers to handle various types of errors that occur within the life cycle of an application’s execution. Application logging can be applied within the Catch section of the TryCatch statement allowing for the errors to be logged when they occur. By placing the logging within the Catch section specific error details can be accessed that help identify the source of the error, the path to the error, what caused the error and definition of the error that occurred. This can then be logged and reviewed at a later date in order recreate the error that was received based data found in the application log. By allowing applications to log errors developers IT staff can use them to recreate errors that are encountered by end-users or other dependent systems.

Read the article

How can I work efficiently on a desktop sharing workflow?

- by OSdave

I am a freelance Magento developer, based in Spain. One of my clients is a Germany based web development company and they're asking me something I think it's impossible. OK, maybe not impossible but definitely not a preferred way of doing things. One of their clients has a Magento Entreprise installation, which is the paid (and I think proprietary) version of Magento. Their client has forbidden them to download the files from his server. My client is asking me now to study one particular module of the application in order to interact with it from a custom module I'll have to develop. As they have a read-only ssh access to their client's server, they came up with this solution: Set up a desktop/screen sharing session between one of their developer's station and mine, alongsides with a skype conversation. Their idea is that I'll say to the developer: show me file foo.php The developer will then open this foo.php file in his IDE. I'll have then to ask him to show me the bar method, the parent class, etc... Remember that it's a read-only session, so forget about putting a Zend_Debug::log() anywhere, and don't even think about a xDebug breakpoint (they don't use any kind of debugger, sic). Their client has also forbidden them to use any version control system... My first reaction when they explained to me this was (and I actually did say it outloud to them): Well, find another client. but they took it as a joke from me. I understand that in a business point of view rejecting a client is not a good practice, but I think that the condition of this assignment make it impossible to complete. At least according to my workflow. I mean, the way I work or learn a new framework/program is: download all files and copy of db on my pc create a git repository and a branch run the application locally use breakpoints use Zend_Debug::log() write the code and tests commit to git repo upload to (test/staging first if there is one, production if not) server I have agreed to try the desktop sharing session, although I think it will be a waste of time. On one hand I don't mind, they pay me for that time, but I know me and I don't like the sensation of loosing my time. On the other hand, I have other clients for whom I can work according to my workflow. I am about to say to them that I cannot (don't want to) do it. Well, I'll first try this desktop sharing session: maybe I'm wrong and it can actually work. But I like to consider myself as a professional, and I know that I don't know everything. So I try to keep an open mind and I am always willing to learn new stuff. So my questions are: Can this desktop-sharing workflow work? What should be done in order to take the most of it? Taking into account all the obstacles (geographic locations, no local, no git), is there another way for me to work on that project?

Read the article

Software Center seems to freeze system when installing, syslog has "blocked for more than 120 seconds" errors

- by nbm

12.04 (precise) 64-bit Kernel Linux 3.2.0-39 3.6GB memory Intel Core 2 Duo CPU @ 2.40GHz x2 WUBI-installed Ubuntu running on a MacBook Pro 7.1 with OSX running Vista via Boot Camp (hey, I like lots of OS's m'kay?) When installing from Ubuntu software center my system very frequently freezes. This has happened 4 of the last 5 installs. Most recently I was installing the Google Earth .deb from Google's website: clicking the .deb file automatically opens Software Center (otherwise I would have used Synaptic, as I've grown to expect Software Center to freeze my system and I'm rather tired of it.) By "freeze" I mean nothing works: no dash, no launcher, no mouse movement, no alt-tab, can't open terminal (keyboard does not work). Software center does show the "installing" icon but after that it greys out and I can't click anything. REISUB has no effect but a cold power-down and restart is possible. Occasionally, after 5-10 minutes, I'll be able to move the mouse / use the keyboard and run a launcher command or two, although other open apps (Chrome and Software Center) will still be greyed-out/frozen. (I've never waited longer than that - if still unresponsive after 15 minutes I just power down and restart.) Most recently, which is why I am finally posting a question, I waited about 15 minutes and was finally able to open System Monitor while this was going on. Processes tells me that System Monitor is using about 20% of CPU, and nothing else is using much (zeros mostly). In fact I didn't even see Software Center listed? However at this point the system finally partially unfroze, the installation completed, and while I wasn't about to close Software Center I was able to do a system shutdown and fresh restart and I went and took a look at the syslog. In /var/log/syslog I see a lot of ":blocked for more than 120 seconds" messages. Similar to ubuntu hang out with this message :blocked for more than 120 seconds Which has not been answered, and I'm not running a virtual machine. My full syslog with stack traces looks very, very similar to this: Why do tasks on Amazon Xen instance block for over 120 seconds causing server to hang? Note that that question was solved, but that's because the problem was being caused by Amazon and Amazon fixed the bug. I'm not running anything Amazon-related. My syslog does look very similar, however. My question is also similar to this: Troubleshooting server hang But the referenced "duplicate" in that question is about how to kill processes/restart when the system freezes. I know how to kill processes and restart. I want to figure out what is causing the problem so I can try to fix it. I realize that I could just use Synaptic instead of Ubuntu Software Center, but I'd like to try to solve the problem if possible. I'm thinking I should perhaps submit a bug report, but I wanted to first see if anyone else was having any similar problems, and if so what you all did to fix it. I see a number of questions about Software Center freezing and others, including those I linked, about the "blocked for more than 120 seconds" log error, but I didn't see any question that links the two. I did save a copy of the syslog report if anyone wants to see it, but as mentioned it's quite similar to the one posted in the Amazon-related question...and I didn't want to take up even more space unnecessarily as, my apologies - this question has already become extremely verbose!

Read the article

Why does OpenGL seem to ignore my glBindTexture call?

- by Killrazor

I'm having problems making a simple sprite rendering. I load 2 different textures. Then, I bind these textures and draw 2 squares, one with each texture. But only the texture of the first rendered object is drawn in both squares. Its like if I'd only use a texture or as if glBindTexture don't work properly. I know that GL is a state machine, but I think that you only need to change active texture with glBindTexture. I load texture with this method: bool CTexture::generate( utils::CImageBuff* img ) { assert(img); m_image = img; CHECKGL(glGenTextures(1,&m_textureID)); CHECKGL(glBindTexture(GL_TEXTURE_2D,m_textureID)); CHECKGL(glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR)); CHECKGL(glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR)); //CHECKGL(glTexImage2D(GL_TEXTURE_2D,0,img->getBpp(),img->getWitdh(),img->getHeight(),0,img->getFormat(),GL_UNSIGNED_BYTE,img->getImgData())); CHECKGL(glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, img->getWitdh(), img->getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img->getImgData())); return true; } And I bind textures with this function: void CTexture::bind() { CHECKGL(glBindTexture(GL_TEXTURE_2D,m_textureID)); } Also, I draw sprites with this method void CSprite2D::render() { CHECKGL(glLoadIdentity()); CHECKGL(glEnable(GL_TEXTURE_2D)); CHECKGL(glEnable(GL_BLEND)); CHECKGL(glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); m_texture->bind(); CHECKGL(glPushMatrix()); CHECKGL(glBegin(GL_QUADS)); CHECKGL(glTexCoord2f(m_textureAreaStart.s,m_textureAreaStart.t)); // 0,0 by default CHECKGL(glVertex3i(m_position.x,m_position.y,0)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s,m_textureAreaStart.t)); // 1,0 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y, 0)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s, m_textureAreaEnd.t)); // 1,1 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y + m_dimensions.y, 0)); CHECKGL(glTexCoord2f(m_textureAreaStart.s, m_textureAreaEnd.t)); // 0,1 by default CHECKGL(glVertex3i( m_position.x, m_position.y + m_dimensions.y,0)); CHECKGL(glPopMatrix()); CHECKGL(glDisable(GL_BLEND)); } Edit: I bring also the check error code: int CheckGLError(const char *GLcall, const char *file, int line) { GLenum errCode; //avoids infinite loop int errorCount = 0; while ( (errCode=glGetError()) != GL_NO_ERROR && ++errorCount < 3000) { utils::globalLogPtr log = utils::CGLogFactory::getLogInstance(); const GLubyte *errString; errString = gluErrorString(errCode); std::stringstream ss; ss << "In "<< __FILE__<<"("<< __LINE__<<") "<<"GL error with code: " << errCode<<" at file " << file << ", line " << line << " with message: " << errString << "\n"; log->addMessage(ss.str(),ZEL_APPENDER_GL,utils::LOGLEVEL_ERROR); } return 0; }

Read the article

Migration and deployement problems JBoss 4.2.2.GA to JBoss 6.0.0.M2

- by krzyamaneko

Hi, I'm trying to migrate an application running on JBoss 4.2.2.GA to JBoss 6.0.0.M2 I give you some log to explain my problem : boot.log : 2010-03-16 09:59:29,406 ERROR [org.jboss.system.server.profileservice.ProfileServiceBootstrap] (Thread-2) Failed to load profile: Summary of incomplete deployments (SEE PREVIOUS ERRORS FOR DETAILS): DEPLOYMENTS IN ERROR: Deployment "vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/" is in error due to the following reason(s): java.lang.IllegalStateException: Factory$org.jboss.aspects.remoting.InvokeRemoteInterceptor is already installed. server.log : 11:58:33,156 ERROR [AbstractKernelController] Error installing to PostClassLoader: name=vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/ state=ClassLoader mode=Manual requiredState=PostClassLoader: org.jboss.deployers.spi.DeploymentException: Cannot process metadata at org.jboss.deployers.spi.DeploymentException.rethrowAsDeploymentException(DeploymentException.java:49) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:196) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:95) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1660) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1378) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1431) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1319) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:918) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:633) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:898) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:677) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:403) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(AbstractProfileService.java:308) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:259) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:100) at org.jboss.bootstrap.impl.base.server.AbstractServer.startBootstraps(AbstractServer.java:860) at org.jboss.bootstrap.impl.base.server.AbstractServer$StartServerTask.run(AbstractServer.java:441) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.ClassNotFoundException: common.Main from BaseClassLoader@e1c3a7{vfszip:/G:/jboss-6.0.0.M2/server/default/deploy/serveur.jar/} at org.jboss.classloader.spi.base.BaseClassLoader.loadClass(BaseClassLoader.java:498) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.jboss.deployment.OptAnnotationMetaDataDeployer.processJBossClientMetaData(OptAnnotationMetaDataDeployer.java:105) at org.jboss.deployment.OptAnnotationMetaDataDeployer.processMetaData(OptAnnotationMetaDataDeployer.java:73) at org.jboss.deployment.AnnotationMetaDataDeployer.deploy(AnnotationMetaDataDeployer.java:192) ... 34 more 11:58:40,828 INFO [JMXConnectorServerService] JMX Connector server: service:jmx:rmi://127.0.0.1/jndi/rmi://127.0.0.1:10900/jmxconnector 11:58:46,500 INFO [MailService] Mail Service bound to java:/Mail 11:58:46,593 ERROR [NamingProviderURLWriter] Cannot create a naming service URL file at file:/G:/jboss-6.0.0.M2/server/default/data/jnp-service.url: java.io.IOException: Accès refusé at java.io.WinNTFileSystem.createFileExclusively(Native Method) at java.io.File.createNewFile(File.java:883) at org.jboss.naming.NamingProviderURLWriter.start(NamingProviderURLWriter.java:151) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.reflect.plugins.introspection.ReflectionUtils.invoke(ReflectionUtils.java:59) at org.jboss.reflect.plugins.introspection.ReflectMethodInfoImpl.invoke(ReflectMethodInfoImpl.java:151) at org.jboss.joinpoint.plugins.BasicMethodJoinPoint.dispatch(BasicMethodJoinPoint.java:66) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction$JoinpointDispatchWrapper.execute(KernelControllerContextAction.java:257) at org.jboss.kernel.plugins.dependency.ExecutionWrapper.execute(ExecutionWrapper.java:47) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction.dispatchExecutionWrapper(KernelControllerContextAction.java:125) at org.jboss.kernel.plugins.dependency.KernelControllerContextAction.dispatchJoinPoint(KernelControllerContextAction.java:72) at org.jboss.kernel.plugins.dependency.LifecycleAction.installActionInternal(LifecycleAction.java:202) at org.jboss.kernel.plugins.dependency.InstallsAwareAction.installAction(InstallsAwareAction.java:54) at org.jboss.kernel.plugins.dependency.InstallsAwareAction.installAction(InstallsAwareAction.java:42) at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.deployers.vfs.deployer.kernel.BeanMetaDataDeployer.deploy(BeanMetaDataDeployer.java:180) at org.jboss.deployers.vfs.deployer.kernel.BeanMetaDataDeployer.deploy(BeanMetaDataDeployer.java:58) at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:62) at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:55) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1660) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1378) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1399) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1319) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:918) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:633) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:898) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:677) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:403) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:378) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2029) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1050) at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1289) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1213) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1107) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:873) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:620) at org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(AbstractProfileService.java:308) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:259) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:100) at org.jboss.bootstrap.impl.base.server.AbstractServer.startBootstraps(AbstractServer.java:860) at org.jboss.bootstrap.impl.base.server.AbstractServer$StartServerTask.run(AbstractServer.java:441) at java.lang.Thread.run(Thread.java:619) this application works fine on JBoss 4.2.2.GA, if someone have any idea, I need some help.

Search Results

Search found 19499 results on 780 pages for 'transaction log'.

Page 361/780 | < Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368 | Next Page >

- by Jeff

- by Jim Giercyk

- by xektrum

- by AjarnMark

- by Anne R.

- by Achilles

- by l0b0

- by Simon Cooper

- by mawburn

- by Jane Story

- by Geertjan

- by andrew

- by StercoreCode

- by Irem Radzik

- by Joe Mayo

- by PCat

- by Get Proactive Customer Adoption Team

- by Githlar

- by user12626240

- by OSdave

- by nbm

- by Killrazor

- by krzyamaneko

< Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368 | Next Page >