Search Results

Search found 12189 results on 488 pages for 'ds store'.

Page 362/488 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

  • Digital Storage for Airline Entertainment

    - by Bill Evjen
    by Thomas Coughlin Common flash memory cards The most common flash memory products currently in use are SD cards and derivative products (e.g. mini and micro-SD cards) Some compact flash used for professional applications (such as DSLR cameras) Evolution of leading flash formats Standardization –> market expansion Market expansion –> volume iNAND –> focus is on enabling embedded X3 iSSD –> ideal for thin form factor devices Flash memory applications Phones are the #1 user of flash memory Flash memory is used as embedded and removable storage in many mobile applications Flash memory is being used in computers as USB sticks and SSDs Possible use of flash memory in computer combined with HDDs (hybrid HDDs and paired or dual storage computers) It can be a removable card or an embedded card These devices can only handle a specific number of writes Flash memory reads considerably quicker than hard drives Hybrid and dual storage in computers SSDs can provide fast performance but they are expensive HDDs can provide cheap storage but they are relatively slow Combining some flash memory with a HDD can provide costs close to those of HDDs and performance close to flash memory Seagate Momentus XT hybrid HDD Various dual storage offerings putting flash memory with HDDs Other common flash memory devices USB sticks All forms and colors Used for moving files around Some sold with content on them (Sony Movies on USB sticks) Solid State Drives (SSDs) Floating Gate Flash Memory Cell When a bit is programmed, electrons are stored upon the floating gate This has the effect of offsetting the charge on the control gate of the transistor If there is no charge upon the floating gate, then the control gate’s charge determines whether or not a current flows through the channel A strong charge on the control gate assumes that no current flows. A weak charge will allow a strong current to flow through. Similar to HDDs, flash memory must provide: Bit error correction Bad block management NAND and NOR memories are treated differently when it comes to managing wear In many NOR-based systems no management is used at all, since the NOR is simply used to store code, and data is stored in other devices. In this case, it would take a near-infinite amount of time for wear to become an issue since the only time the chip would see an erase/write cycle is when the code in the system is being upgraded, which rarely if ever happens over the life of a typical system. NAND is usually found in very different application than is NOR Flash memory wears out This is expected to get worse over time Retention: Disappearing data Bits fade away Retention decreases with increasing read/writes Bits may change when adjacent bits are read Time and traffic are concerns Controllers typically groom read disturb errors Like DRAM refresh Increases erase/write frequency Application characteristics Music – reads high / writes very low Video – r high / writes very low Internet Cache – r high / writes low On airplanes Many consumers now have their own content viewing devices – do they need the airlines? Is there a way to offer more to consumers, especially with their own viewers Additional special content tie into airplane network access to electrical power, internet Should there be fixed embedded or removable storage for on-board airline entertainment? Is there a way to leverage personal and airline viewers and content in new and entertaining ways?

    Read the article

  • BI&EPM in Focus June 2013

    - by Mike.Hallett(at)Oracle-BI&EPM
    Analyst Report from Ovum: BI bites into a bigger slice of Oracle’s Red Stack Customers INC Research Ensures 24/7 Enterprise Application Availability and Supports Rapid Expansion in Asia with Managed Cloud Services – Hyperion Planning, PeopleSoft, E-Business Suite, SOA Suite PL Developments Improves Quality and Demand Planning Accuracy, Streamlines Compliance as It Moves into Manufacturing – Hyperion Planning, OBIEE, E-Business Suite Release 12.1, Agile, Demantra Kiabi Provides Store Managers with Monthly Earnings Statements in Four Business Days to Support Continued Retail Growth – Hyperion Planning, Hyperion Financial Reporting, Hyperion Smart View for Office Speedy Cash Improves Global Financial Budgeting and Forecasting to Support Continued Company Growth - Hyperion Planning, Essbase, Hyperion Smart View for Office, Hyperion Financial Management Grupo Sports World Automates and Reduces Budget Consolidation Time by 33% for 30 Fitness Centers – Hyperion Planning Jupiter Shop Channel Automates Budgeting Processes, Enhances Visibility of Project Investments to Support Strategic Decision-Making – Hyperion Planning GENBAND Saves US$1.25 Million Annually with Automated Global Trade Management, Gains Compliance Assurance – Hyperion Financial Management, E-Business Suite Aldar Properties Consolidates and Simplifies Group Planning and Reporting for Business and Finance Structures with Integrated ERP and Business Intelligence – Hyperion Planning, Essbase, Data Integrator, OBIEE, E-Business Suite, SUN Link to Complete Archive Enterprise Performance Management Hyperion EPM 11.1.2.3 Webcast Tutorials EPM Blog: Three Technologies CFOs Need to Know About The CFO as Catalyst for Change - Part 1 The CFO as Catalyst for Change - Part 2 Actions Speak Louder in Scorecards Unlocking Business Potential with Enterprise Performance Management Business Intelligence Oracle Database 12c is launched Analysis: How to Take Big Data Advantage of Oracle Database 12c by Data-informed.com Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

    Read the article

  • The Niantic Project: Ingress by Felicia Hajra-Lee

    Despite the current fact that the augmented reality game for Android is still in beta phase, it is amazing to see that the world of literature is already taking momentum on this 'real-life' universe. After reading 'The Alignment: Ingress' by Thomas Greanias it took only a blink of the eye to go for 'The Niantic Project: Ingress' by Felicia Hajra-Lee, too. Here is the review I posted on Amazon.com: Ingress, a parallel universe to our reality, is here. There is no doubt about this anymore... The Niantic Project, originated at the CERN collider in Geneva, Switzerland, got into focus of global players. And the game is hard; fair-play is only for the fainted ones. Felicia understands to drag the audience directly into the action of the Niantic Project and its protagonists. The novella is heavily based on the investigations posted daily on the website of Ingress. She really understands how to interweave the various clues and creates an atmosphere where it sometimes feels challenging to differentiate between fiction and reality. It all starts with 'Epiphany Night' at the Niantic Labs, the high exposure of Exotic Matter (XM) and the escape of scientist Dr. Devra Bogdanovich and 'sentinel' Roland Jarvis. Of course, a new research, or should we name it technology, like the Niantic Project has to be protected and there are multiple parties on the hunt. Throughout the various chapters Felicia introduces new potential buyers from all over the globe, gives us detailed insights on the hunters and their brutal effectiveness to finish an assignment, and manages to keep the reader in high-pitched mode thanks to a couple of turn-arounds in the overall story. Personally, I have to say that I really enjoyed reading this title. Felicia's love to details is absolutely amazing, and sometimes I was really wondering whether she would be one of the assassins. But unfortunately I also have to say that I'm not a great fan of the structural organization of the (title-less) chapters. It is fascinating to follow the ventures of Devra, Farlowe and 855 but occasionally I had to go back to previous paragraphs in order to keep track of the individual plots. Overall a great title, captivating and rich in details but simply too short. Please Fecilia, gives us more to read. As an owner of an Android smartphone or tablet, you should get yourself into the world of Ingress. Check out the Play Store to install the app. Now. ;-)

    Read the article

  • VS.NET 2010 SP1, Win 7, Parallels, and a MBP&ndash;Hell, my friends&hellip;HELL!

    - by D'Arcy Lussier
    LightSwitch Beta 2 is out. That’s how all this started. All I wanted was to install it on my MBP’s Win7 Parallels VM. But as I’m finding with running a Win7 VM on a MBP, nothing is as easy as it should be. First my MBP froze during the SP1 installation. Not my VM crashing, the entire machine freezing…no mouse, nothing. Had to do a hard reset. BLECH. Then we’re back and I try to re-install SP1 (since the first try obviously failed). I get met with a dialog asking me where silverlight_sdk.msi was. It was *nowhere*! So I hit the net and download it from Microsoft’s site. Unfortunately, it only downloads an exe and not the individual files which would include the msi. Here’s what I did: - Download the tools for Silverlight 4 (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=b3deb194-ca86-4fb6-a716-b67c2604a139&displaylang=en) - Run it, but don’t hit the install or next button when the dialog comes up - Look in your file structure for a folder with a weird name…bunch of numbers and letters. This is a temp folder that the exe creates and dumps all the necessary setup files into, and clears away after its done. - Inside this folder you’ll find the silverlight_sdk.msi (hooray!). Just copy it to a different location on the C drive. You can then cancel installation. Ok, so that takes care of that…but then running the SP1 installer I get hit with *another* dialog asking for the WCF RIA Services SP1 msi. Now it looks like this MSI is part of the Silverlight Tools package because you’ll see the MSI, but the VS.NET 2010 SP1 installer will thumb its nose at this unworthy msi…for whatever reason. So instead, go here: http://www.silverlight.net/getstarted/riaservices/ …and click on the “Install WCF Ria Services Sp1…” option. This downloads the msi, which you should save to your C drive and direct the VS.NET 2010 SP1 installer to. Then, if you’ve done all that, been good all year, and not made any little children cry, you *might* just be able to install VS.NET 2010 SP1 on your Parallels VM. If you were playing that “Take a shot every time he writes VS.NET 2010 Sp1” drinking game, then you’re drunk…which is a better place to be than where I am right now: watching the installation progress bar slowly creep to completion, hoping there’s no more surprises in store. D

    Read the article

  • A* navigational mesh path finding

    - by theguywholikeslinux
    So I've been making this top down 2D java game in this framework called Greenfoot [1] and I've been working on the AI for the guys you are gonna fight. I want them to be able to move around the world realistically so I soon realized, amongst a couple of other things, I would need some kind of pathfinding. I have made two A* prototypes. One is grid based and then I made one that works with waypoints so now I need to work out a way to get from a 2d "map" of the obstacles/buildings to a graph of nodes that I can make a path from. The actual pathfinding seems fine, just my open and closed lists could use a more efficient data structure, but I'll get to that if and when I need to. I intend to use a navigational mesh for all the reasons out lined in this post on ai-blog.net [2]. However, the problem I have faced is that what A* thinks is the shortest path from the polygon centres/edges is not necessarily the shortest path if you travel through any part of the node. To get a better idea you can see the question I asked on stackoverflow [3]. I got a good answer concerning a visibility graph. I have since purchased the book (Computational Geometry: Algorithms and Applications [4]) and read further into the topic, however I am still in favour of a navigational mesh (See "Managing Complexity" [5] from Amit’s Notes about Path-Finding [6]). (As a side note, maybe I could possibly use Theta* to convert multiple waypoints into one straight line if the first and last are not obscured. Or each time I move back check to the waypoint before last to see if I can go straight from that to this) So basically what I want is a navigational mesh where once I have put it through a funnel algorithm (e.g. this one from Digesting Duck [7]) I will get the true shortest path, rather than get one that is the shortest path following node to node only, but not the actual shortest given that you can go through some polygons and skip nodes/edges. Oh and I also want to know how you suggest storing the information concerning the polygons. For the waypoint prototype example I made I just had each node as an object and stored a list of all the other nodes you could travel to from that node, I'm guessing that won't work with polygons? and how to I tell if a polygon is open/traversable or if it is a solid object? How do I store which nodes make up the polygon? Finally, for the record: I do want to programme this by myself from scratch even though there are already other solutions available and I don't intend to be (re) using this code in anything other than this game so it does not matter that it will inevitably be poor quality. http://greenfoot.org http://www.ai-blog.net/archives/000152.html http://stackoverflow.com/q/7585515/ http://www.cs.uu.nl/geobook/ http://theory.stanford.edu/~amitp/GameProgramming/MapRepresentations.html http://theory.stanford.edu/~amitp/GameProgramming/ http://digestingduck.blogspot.com/2010/03/simple-stupid-funnel-algorithm.html

    Read the article

  • CodePlex Daily Summary for Wednesday, November 23, 2011

    CodePlex Daily Summary for Wednesday, November 23, 2011Popular ReleasesVisual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775Developer Team Article System Management: DTASM v1.3: ?? ??? ???? 3 ????? ???? ???? ????? ??? : - ????? ?????? ????? ???? ?? ??? ???? ????? ?? ??? ? ?? ???? ?????? ???? ?? ???? ????? ?? . - ??? ?? ???? ????? ???? ????? ???? ???? ?? ????? , ?????? ????? ????? ?? ??? . - ??? ??????? ??? ??? ???? ?? ????? ????? ????? .SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...Anno 2070 Assistant: v0.1.0 (STABLE): Version 0.1.0 Features Production Chains Eco Production Chains (Complete) Tycoon Production Chains (Disabled - Incomplete) Tech Production Chains (Disabled - Incomplete) Supply (Disabled - Incomplete) Calculator (Disabled - Incomplete) Building Layouts Eco Building Layouts (Complete) Tycoon Building Layouts (Disabled - Incomplete) Tech Building Layouts (Disabled - Incomplete) Credits (Complete)Free SharePoint 2010 Sites Templates: SharePoint Server 2010 Sites Templates: here is the list of sites templates to be downloadedVsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 30 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 30 (beta)New: Support for TortoiseSVN 1.7 added. (the download contains both setups, for TortoiseSVN 1.6 and 1.7) New: OpenModifiedDocumentDialog displays conflicted files now. New: OpenModifiedDocument allows to group items by changelist now. Fix: OpenModifiedDocumentDialog caused Visual Studio 2010 to freeze sometimes. Fix: The installer didn...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.30: Highlight features & improvements: • Performance optimization. • Back in stock notifications. • Product special price support. • Catalog mode (based on customer role) To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).WPF Converters: WPF Converters V1.2.0.0: support for enumerations, value types, and reference types in the expression converter's equality operators the expression converter now handles DependencyProperty.UnsetValue as argument values correctly (#4062) StyleCop conformance (more or less)Json.NET: Json.NET 4.0 Release 4: Change - JsonTextReader.Culture is now CultureInfo.InvariantCulture by default Change - KeyValurPairConverter no longer cares about the order of the key and value properties Change - Time zone conversions now use new TimeZoneInfo instead of TimeZone Fix - Fixed boolean values sometimes being capitalized when converting to XML Fix - Fixed error when deserializing ConcurrentDictionary Fix - Fixed serializing some Uris returning the incorrect value Fix - Fixed occasional error when...Media Companion: MC 3.423b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Replaced 'Rebuild' with 'Refresh' throughout entire code. Rebuild will now be known as Refresh. mc_com.exe has been fully updated TV Show Resolutions... Resolved issue #206 - having to hit save twice when updating runtime manually Shrunk cache size and lowered loading times f...Delta Engine: Delta Engine Beta Preview v0.9.1: v0.9.1 beta release with lots of refactoring, fixes, new samples and support for iOS, Android and WP7 (you need a Marketplace account however). If you want a binary release for the games (like v0.9.0), just say so in the Forum or here and we will quickly prepare one. It is just not much different from v0.9.0, so I left it out this time. See http://DeltaEngine.net/Wiki.Roadmap for details.ASP.net Awesome Samples (Web-Forms): 1.0 samples: Demos and Tutorials for ASP.net Awesome VS2008 are in .NET 3.5 VS2010 are in .NET 4.0 (demos for the ASP.net Awesome jQuery Ajax Controls)SharpMap - Geospatial Application Framework for the CLR: SharpMap-0.9-AnyCPU-Trunk-2011.11.17: This is a build of SharpMap from the 0.9 development trunk as per 2011-11-17 For most applications the AnyCPU release is the recommended, but in case you need an x86 build that is included to. For some dataproviders (GDAL/OGR, SqLite, PostGis) you need to also referense the SharpMap.Extensions assembly For SqlServer Spatial you need to reference the SharpMap.SqlServerSpatial assemblyAJAX Control Toolkit: November 2011 Release: AJAX Control Toolkit Release Notes - November 2011 Release Version 51116November 2011 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 - Binary – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 - Binary – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found h...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.36: Fix for issue #16908: string literals containing ASP.NET replacement syntax fail if the ASP.NET code contains the same character as the string literal delimiter. Also, we shouldn't be changing the delimiter for those literals or combining them with other literals; the developer may have specifically chosen the delimiter used because of possible content inserted by ASP.NET code. This logic is normally off; turn it on via the -aspnet command-line flag (or the Code.Settings.AllowEmbeddedAspNetBl...MVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds SDK .NET Wrapper to provide this functionality.Aigu: Enter special characters like you would on your mobile phone. For instance, if you want to type 'é', you just hold down 'e' and a menu will appear. Selected the desired character using the arrow keys and press 'enter'. Simple but powerful.Are you workaholic?: Are you a workaholic? Did your Doctor advice you not to stare at the computer monitor for a long time? Then this app is perfectly made for you. It runs in the background, and alerts you to take periodic rests for your eyes and body. What's more, It's open source (MS-PL).ATDIS PoC: privateAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This allows you to publish new versions of these files without having to force the server or the client browsers to expire cache.Bachelor Thesis Algorithm Test Bed: Algorithm Test Bed for my Bachelor ThesisBase64: Simple application helps converting strings and files from or to Base64 string. You can use any encoding to convert while a sidebar previews decoded string for all other encodings.BoracayExpress: BoracayExpressC++ Framework for Test Driven Development: A testing framework for C++ written in C++.Class2Table: Class2Table aka Entity2Table. Easy tool that allows creation of SQL tables from .Net types.Code for Demos & Experiments: This is where I will post code from demos and presentationsCodeMaker: CodeMaker?????????: 1、?????????? 2、???? 3、????? 4、??Python????????? ConsoleCommand: ConsoleCommand provides certain .Net commands for access from javascript console engines. Included are commands to set the text and background colors, as well as list and extract resources compiled in a .Net dll. Converter: Character code conversion tools ???????? CryptoInator - self contained, self-encrypting, self-decrypting image viewer: Original developed to encrypt and store NemID images in Denmark. DAiBears: Something, something, botDelicious Notify Plugin: Lets you push a blog post straight to Delicious from Live WriterDeveloperFile: Compresses Javascripts using the YUI .NET project. Loops through the root folder and subfolders for files matching the debug extension and creates new files using the release extension. (File extensions must match exactly).DotNetNuke SharePoint File Explorer: A DotNetNuke SharePoint File ExplorerDouban FM: WP7 Douban FM appGame Lib: Game Library is a open-source game library to allow focusing on the fun part of a game. It is developed in C#, but will be ported to C++ and VB.net.Google reader notes to Delicious Export tool (WPF): Google reader discontinued note in reader features. Current google reader allows to export users old notes in JSON format, This App will parse the JSON file & upload it to it delicious , delicious is a good alternative for note in readerHtml Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that was before server exception. It helps to reproduce bugs and can be used with other logging systems.Ideopuzzle: A puzzle gameImageShack-Uploader: This project demonstrates how to upload files automated to imageshack.us and other image hosters with C#.Insert Acronym Tags: Lets you insert <acronym> and <abbr> tags into your blog entry more easily.Insert Quick Link: Allows you to paste a link into the Writer window and have the a window similar to the one in Writer where you can change what text is to appear, open in new window, etc.Insert Video Plugin: Allows you to insert a video into a blog entry from a multitude of different sitesIoCWrap: Provides a wrapper to the various IoC container implementations so that it is possible to switch to a different provider without changing any application code.kaveepoj: sharepoint projectKinect Quiz Engine: Fun quiz game for the Kinect.Klaverjas: Test application for testing different new technologies in .NET (WCF, DataServices, C# stuff, Entity...etc.)Man In The Middle: A cyberpunk themed action with puzzle and strategy elements. Made with XNA as part of a game development course at the IT University of Copenhagen by Bo Bendtsen, Jonas Flensbak, Daniel Kromand, Jess Rahbek & Darryl Woodford.MediaSelektor: Simple tool to select mediasMicajah Mindtouch Deki Wiki Copier: Small C# application to move data between 2 Deki Wiki installs or, more importantly, from a wik.is account to a locally installed systemMineFlagger: MineFlagger is a mine clearing game modeled after Microsoft’s Minesweeper. In addition to standard play, MineFlagger incorporates an AI for fun and training.myXbyqwrhjadsfasfhgf: myXbyqwrhjadsfasfhgfnatoop: natoopNauplius.KeyStore: Provides secure application key storage backed by SQL 2008 and Active Directory.ObjectDB: An object database written using C# 4 and Mono.Cecil.PaceR: PaceR is an attempt to encapsulate a lot of the common code functionality I use on different projects. Instead of recreating functionality from memory or worse, copying from older projects, I'd like to have a central location to maintain this common code. Parseq: Parseq is a Parser Combinator library written in C# (version 2.0).PowerShell Network Adapter Configuration module: PowerShell Network Adapter Configuration module is a PowerShell module which provides functions for managing network adapters using WMI.public traffic tracker: This is a university project for a .net course. We develop a public traffic tracker applications for Windows Phone 7 devices, that can give information about the actual positions of the nearest vehicle on a given line. The speciality is that we use only the GPS information of the users' WP7 devices, so this is a completely software solution without any hardware investment. The disatvantage is that for the real operation we would need a lot of active WP7 user.puyo: puyoRadioTroll: Projeto web Radio TrollRead Feed Community: Read Feed CommunityReviewer: Reviewer.dk - Dansk spil og anmeldelsessite.Rollout Sharepoint Solutions - ROSS: ROSS performs the following actions: - Delete sitecollection and restart services - 'Get Latest Version' from SourceSafe - Rebuild Solution - Install all wsp solutions - Create SiteCollections - Check for build en provisioning errors - Send email to developers if errors occurredSchool Management: school managementSQL File Executer: This project is a class library written in c# which is used for executing *.sql files in remote server. Simply one dll file. You include it in your web project, add using statement at the top of your page, pass the parameters inside. Rest, it will do.Startup Manager: Startup Manager launches all startup programs at a managed rate therefore meaning that your computer doesn't crash everytime it starts up and you can use it immediately.stetic: ...Test Infrastructure Guidance: The purpose of this project is to provide guidance to testers in using TFS effectively as an ALM solution. TFS is much more than a simple code repository. Used with Visual Studio it can form a powerful testing solution and remove a lot of pain in dealing with test infrastructure overhead.Tête-à-tête: Tete-a-tete is an address book with a built-in function to send electronic mail over the Internet.Tipeysh! - Add-in that helps you creating C/C++ header files on a single click: Are you also feel miserable when you need to create a new header file in your Visual Studio C/C++ project? Repeatedly choosing "new header file", then writing the annoying (but needed) "#ifndef" section, then writing the class name with it's "private", "protected" and "public" access modifiers... too much clicks and typewriting! Well, there is a solution: Tipeysh! is a simple, easy to use, very handy and configurable Visual Studio Add-In, compatible for both the 2005 and 2008 versions. Once ...UMN Dashboard Project: academic projUsersMOSS: UsersMOSS est une petite application permettant de consulter sur un serveur MOSS les sites web (SPWeb) les users (SPUser), et les groupes (SPGroup). Cette application utilise le modèle objet de MOSS pour inspecter le contenu des objets d'un serveur MOSS. Cette application est loin d'être professionnelle, ou même terminée, mais elle me rend très souvent service. Surtout ne l'utilisez pas sur un serveur de production car le gestion du GC n'est pas faite, ce qui peut provoquer des plantages de v...UtilityLibrary.Win32: UtilityLibrary.Win32UW iLearn: The iLearn activity inference platform is a suite of desktop and mobile tools for logging, modeling, and classifying sensor data for mobile devices. It was created at the University of Washington.VsDocGen: Dynamic javascript documentation generation directly from xml comment documented source code.Windows Live Spaces Photo Album plugin: This is going to be a plugin for Windows Live Writer that will allow you to browse a Windows Live Space Photo Album.Windows Live Writer Plugin for Amazon Books using CueCat: This Windows Live Writer Plugin is for users who use WLW and wish to use their CueCat to scan books. ItemLookups are run against Amazon via its AWS and book image, title, author, and publisher is returned. This project was first created by Scott Hanselman on MSDN's Coding4Fun! X7: X7 makes it easier for win7user to clean the system. You'll no longer have to delete useless stuff in your win7. It's developed in bat.xDT - Commander: Using this application, the user can assign shortcuts (short texts) for various links/URLs. These short texts will be typed into a Textbox to then launch/go to the target (similar to the "Run" program in Windows).

    Read the article

  • Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic

    - by Asian Angel
    Are you looking for a way to manage your Twitter, Facebook, Google Buzz, LinkedIn, and Foursquare accounts all in one place? Using the Seesmic Web App for Chrome and Iron you can access your favorite accounts and manage them in a single, simple-to-use interface. A feature that we loved from the start was the ability to access Twitter without creating a special Seesmic account. And in these days of multiple accounts who needs another one to complicate things up? All that you need to do is to sign in with your user name/e-mail along with your password. You do have to authorize access for Seesmic to connect with your account but the whole process (login & authorization) is handled in a single window instance. Now on to a quick look at some of the UI features… The sidebar allows you to add additional columns to the main interface, set your favorite location for Trends, and tie in additional social services as desired. You can also access additional options and controls in the upper right corner. When you are ready to start tweeting click in the blank at the top and enter your text, etc. in the convenient drop-down window that appears. Another nice perk is the ability to switch to a black and grey theme if the white is too bright for your needs. The Seesmic web app provides a simple-to-use, highly efficient way to manage your Twitter account and other favorite social services in a single tab interface. Seesmic [Chrome Web Store] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic E.T. II – Extinction [Fake Movie Sequel Video] Remastered King’s Quest Games Offer Classic Gaming on Modern Machines Compare Your Internet Cost and Speed to Global Averages [Infographic] Orbital Battle for Terra Wallpaper WizMouse Enables Mouse Over Scrolling on Any Window

    Read the article

  • Windows 8: Everything from design, build, and how to sell a Metro style app

    - by Thomas Mason
    For me, there are a lot of similarities between an application developed for Windows Phone and a Metro style app developed for Windows 8. A Windows Phone 7 application (rather than an XNA game) is built in .NET and XAML against a subset of the .NET framework and the application has a lifecycle which needs to be conscious of battery life and so is split out into foreground/background pieces. The application is sandboxed in terms of its interactions with the local device and is packaged with a manifest which describes those interactions. The app needs to be aware of network connectivity status and its work on the network is done asynchronously to preserve the user experience.The app is packaged and deployed to a Marketplace which the user browses to find the app, read reviews, perhaps purchase it and then install it and receive updates over time. Quite a lot of those statements are as true of a Windows 8 Metro style app as they are for a Windows Phone app and so a Windows Phone app developer already has a good head start when it comes to building Metro style apps for Windows 8. With that in mind, there is an event to help developers with a Windows Phone app in Marketplace to begin the process of looking at Windows 8 and whether you can get a quick win by bringing your Phone application onto Windows. The idea of the event was to provide a space where developers can get together over 2 days and take the time out to look at what it means to take their app from Windows Phone to Windows 8. Kicking off on Saturday 16th June at 10am, we are told they have plenty of power sockets, WiFi, whiteboards, drinks, pizza, games, prizes and some quiet space that you can work in. Including people on hand with Windows Phone and Windows 8 experience to help everything along the way. There will be an attendee-voted schedule of talks but we’ll keep these out of your way if you just want to get on and code. We’ll also provide information around submitting your app to the Windows Store If you have a Windows Phone app in Marketplace, now’s a great time to look at getting it onto Windows 8. Sign up. Bring your laptop. Bring your app. Bring Windows 8 and Visual Studio 11. And everyone will their best to help you get your app onto Windows 8. Location & Venue TBA but it will be in central London, accessible by major railway and underground transportation. Day 1 Saturday 16th June 10am – 9pm Day 2 Sunday 17th June 10am – 4pm

    Read the article

  • 2 Birds, 1 Stone: Enabling M2M and Mobility in Healthcare

    - by Eric Jensen
    Jim Connors has created a video showcase of a comprehensive healthcare solution, connecting a mobile application directly to an embedded patient monitoring system. In the demo, Jim illustrates how you can easily build solutions on top of the Java embedded platform, using Oracle products like Berkeley DB and Database Mobile Server. Jim is running Apache Tomcat on an embedded device, using Berkeley DB as the data store. BDB is transparently linked to an Oracle Database backend using  Database Mobile Server. Information protection is important in healthcare, so it is worth pointing out that these products offer strong data encryption, for storage as well as transit. In his video, Jim does a great job of demystifying M2M. What's compelling about this demo is that uses a solution architecture that enterprise developers are already comfortable and familiar with: a Java apps server with a database backend. The additional pieces used to embed this solution are Oracle Berkeley DB and Database Mobile Server. It functions transparently, from the perspective of Java apps developers. This means that organizations who understand Java apps (basically everyone) can use this technology to develop embedded M2M products. The potential uses for this technology in healthcare alone are immense; any device that measures and records some aspect of the patient could be linked, securely and directly, to the medical records database. Breathing, circulation, other vitals, sensory perception, blood tests, x-rats or CAT scans. The list goes on and on. In this demo case, it's a testament to the power of the Java embedded platform that they are able to easily interface the device, called a Pulse Oximeter, with the web application. If Jim had stopped there, it would've been a cool demo. But he didn't; he actually saved the most awesome part for the end! At 9:52 Jim drops a bombshell: He's also created an Android app, something a doctor would use to view patient health data from his mobile device. The mobile app is seamlessly integrated into the rest of the system, using the device agent from Oracle's Database Mobile Server. In doing so, Jim has really showcased the full power of this solution: the ability to build M2M solutions that integrate seamlessly with mobile applications. In closing, I want to point out that this is not a hypothetical demo using beta or even v1.0 products. Everything in Jim's demo is available today. What's more, every product shown is mature, and already in production at many customer sites, albeit not in the innovative combination Jim has come up with. If your customers are in the market for these type of solutions (and they almost certainly are) I encourage you to download the components and try it out yourself! All the Oracle products showcased in this video are available for evaluation download via Oracle Technology Network.

    Read the article

  • The Loneliest Road in America and the OTN Garage

    - by rickramsey
    Source I never told anyone how the image of the OTN Garage on Facebook came to be. I took the Facebook picture on Route 50 in Nevada, USA, in October of 2010. I was riding from Colorado to Oracle OpenWorld in San Francisco, so it was probably October. Route 50 is known as "The Loneliest Road in America." There are roads across Nevada that have even LESS traffic, but Route 50 still one. desolate. road. Although I have seen stranger things while riding along Nevada's Extraterrestrial Highway, I still run across notable oddities every time I ride Route 50. Like the old man with a bandolero of water bottles jogging along the side of the highway in the middle of the day, 50 miles from the closest town. First ultra-marathoner I'd seen in action. He waved at me. Or the dozen Corvettes with California license plates driving toward me, all doing the speed limit in the middle of nowhere because they were being tailed by half a dozen Nevada state troopers. #fail. I don't remember which town I was in, but I noticed the building when I stopped at the gas station. While standing there pouring fuel into the Harley, the store caught my eye. So I pulled the bike in front and walked inside. The owner is a little old lady, about 100 years old. Most of the goods she had on the shelves looked like they had been placed there during WWII. She was itty bitty and could barely see over the counter, but she was so happy when I bought a bar of Hershey's chocolate that she gave me a five cent discount. I took a few pictures and, when I got back, Kemer Thomson, who sometimes blogs here, photoshopped the OTN Garage and Oil Change signs onto it. The bike is a 2009 Road King Classic with a Bob Dron fairing and a Corbin heated seat. The seat came in handy when I rode home over Tioga Pass. The Road King is a very comfy touring bike with a great Harley rumble. I'm kinda sorry I sold it. When I stopped for fuel about 75 miles down the road at the next town, I peeled back the chocolate bar. I had turned into powder. Probably 50 years ago. - Rick Website Newsletter Facebook Twitter

    Read the article

  • ASP.NET ViewState Tips and Tricks #2

    - by João Angelo
    If you need to store complex types in ViewState DO implement IStateManager to control view state persistence and reduce its size. By default a serializable object will be fully stored in view state using BinaryFormatter. A quick comparison for a complex type with two integers and one string property produces the following results measured using ASP.NET tracing: BinaryFormatter: 328 bytes in view state IStateManager: 28 bytes in view state BinaryFormatter sample code: // DO NOT [Serializable] public class Info { public int Id { get; set; } public string Name { get; set; } public int Age { get; set; } } public class ExampleControl : WebControl { protected override void OnLoad(EventArgs e) { base.OnLoad(e); if (!this.Page.IsPostBack) { this.User = new Info { Id = 1, Name = "John Doe", Age = 27 }; } } public Info User { get { object o = this.ViewState["Example_User"]; if (o == null) return null; return (Info)o; } set { this.ViewState["Example_User"] = value; } } } IStateManager sample code: // DO public class Info : IStateManager { public int Id { get; set; } public string Name { get; set; } public int Age { get; set; } private bool isTrackingViewState; bool IStateManager.IsTrackingViewState { get { return this.isTrackingViewState; } } void IStateManager.LoadViewState(object state) { var triplet = (Triplet)state; this.Id = (int)triplet.First; this.Name = (string)triplet.Second; this.Age = (int)triplet.Third; } object IStateManager.SaveViewState() { return new Triplet(this.Id, this.Name, this.Age); } void IStateManager.TrackViewState() { this.isTrackingViewState = true; } } public class ExampleControl : WebControl { protected override void OnLoad(EventArgs e) { base.OnLoad(e); if (!this.Page.IsPostBack) { this.User = new Info { Id = 1, Name = "John Doe", Age = 27 }; } } public Info User { get; set; } protected override object SaveViewState() { return new Pair( ((IStateManager)this.User).SaveViewState(), base.SaveViewState()); } protected override void LoadViewState(object savedState) { if (savedState != null) { var pair = (Pair)savedState; this.User = new Info(); ((IStateManager)this.User).LoadViewState(pair.First); base.LoadViewState(pair.Second); } } }

    Read the article

  • Interpolation using a sprite's previous frame and current frame

    - by user22241
    Overview I'm currently using a method which has been pointed out to me is extrapolation rather than interolation. As a result, I'm also now looking into the possibility of using another method which is based on a sprite's position at it's last (rendered) frame and it's current one. Assuming an interpolation value of 0.5 this is, (visually), how I understand it should affect my sprite's position.... This is how I'm obtaining an inerpolation value: public void onDrawFrame(GL10 gl) { // Set/re-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip) { SceneManager.getInstance().getCurrentScene().updateLogic(); nextGameTick += skipTicks; timeCorrection += (1000d / ticksPerSecond) % 1; nextGameTick += timeCorrection; timeCorrection %= 1; loops++; tics++; } interpolation = (float)(System.currentTimeMillis() + skipTicks - nextGameTick) / (float)skipTicks; render(interpolation); } I am then applying it like so (in my rendering call): render(float interpolation) { spriteScreenX = (spriteScreenX - spritePreviousX) * interpolation + spritePreviousX; spritePreviousX = spriteScreenX; // update and store this for next time } Results This unfortunately does nothing to smooth the movement of my sprite. It's pretty much the same as without the interpolation code. I can't get my head around how this is supposed to work and I honestly can't find any decent resources which explain this in any detail. My understanding of extrapolation is that when we arrive at the rendering call, we calculate the time between the last update call and the render call, and then adjust the sprite's position to reflect this time (moving the sprite forward) - And yet, this (Interpolation) is moving the sprite back, so how can this produce smooth results? Any advise on this would be very much appreciated. Edit I've implemented the code from OriginalDaemon's answer like so: @Override public void onDrawFrame(GL10 gl) { newTime = System.currentTimeMillis()*0.001; frameTime = newTime - currentTime; if ( frameTime > (dt*25)) frameTime = (dt*25); currentTime = newTime; accumulator += frameTime; while ( accumulator >= dt ) { SceneManager.getInstance().getCurrentScene().updateLogic(); previousState = currentState; t += dt; accumulator -= dt; } interpolation = (float) (accumulator / dt); render(); } Interpolation values are now being produced between 0 and 1 as expected (similar to how they were in my original loop) - however, the results are the same as my original loop (my original loop allowed frames to skip if they took too long to draw which I think this loop is also doing). I appear to have made a mistake in my previous logging, it is logging as I would expect it to (interpolated position does appear to be inbetween the previous and current positions) - however, the sprites are most definitely choppy when the render() skipping happens.

    Read the article

  • SQL SERVER – Preserve Leading Zero While Coping to Excel from SSMS

    - by pinaldave
    Earlier I wrote two articles about how to efficiently copy data from SSMS to Excel. Since I wrote that post there are plenty of interest generated on this subject. There are a few questions I keep on getting over this subject. One of the question is how to get the leading zero preserved while copying the data from SSMS to Excel. Well it is almost the same way as my earlier post SQL SERVER – Excel Losing Decimal Values When Value Pasted from SSMS ResultSet. The key here is in EXCEL and not in SQL Server. The step here is to change the format of Excel Cell to Text from Numbers and that will preserve the value of the with leading or trailing Zeros in Excel. However, I assume this is done for display purpose only because once you convert column to Text you may find it difficult to do numeric operations over the column for example Aggregation, Average etc. If you need to do the same you should either convert the columns back to Numeric in Excel or do the process in Database and export the same value as along with it as well. However, I have seen in requirement in the real world where the user has to have a numeric value with leading Zero values in it for display purpose. Here is my suggestion, instead of manipulating numeric value in the database and converting it to character value the ideal thing to do is to store it as a numeric value only in the database. Whatever changes you want to do for display purpose should be handled at the time of the display using the format function of SQL or Application Language. Honestly, database is data layer and presentation is presentation layer – they are two different things and if possible they should not be mixed. If due to any reason you cannot follow above advise and you need is to have append leading zeros in the database only here are two of my previous articles I suggest you to refer them. I am open to learn new tricks as these articles are almost three years old. Please share your opinion and suggestions in the comments area. SQL SERVER – Pad Ride Side of Number with 0 – Fixed Width Number Display SQL SERVER – UDF – Pad Ride Side of Number with 0 – Fixed Width Number Display Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Excel

    Read the article

  • Create a Self Signed Sertificate on WLS 10.3.5 Supporting SHA 256 Algorthim.

    - by adejuanc
    1) Set domain to call the keytool $. setDomainEnv.sh 2) Generate the key $ keytool -genkey -alias selfsignedcert -keyalg RSA -sigalg SHA256withRSA -keypass privatepassword -keystore identity.jks -storepass password -validity 365 What is your first and last name? [Unknown]: adejuan-desktop.cl.oracle.com What is the name of your organizational unit? [Unknown]: a What is the name of your organization? [Unknown]: e What is the name of your City or Locality? [Unknown]: i What is the name of your State or Province? [Unknown]: o What is the two-letter country code for this unit? [Unknown]: U Is CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U correct? [no]: yes 3) Export the root certificate $ keytool -export -alias selfsignedcert -sigalg SHA256withRSA -file root.cer -keystore identity.jks Enter keystore password: Certificate stored in file <root.cer> 4) Import the root certificate to the trust store $ keytool -import -alias selfsignedcert -sigalg SHA256withRSA -trustcacerts -file root.cer -keystore trust.jks Enter keystore password: Re-enter new password: Owner: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Issuer: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Serial number: 4f17459a Valid from: Wed Jan 16 15:33:22CLST 2012 until: Thu Jan 15 15:33:22 CLST 2013 Certificate fingerprints: MD5: 7F:08:FA:DE:CD:D5:C3:D3:83:ED:B8:4F:F2:DA:4E:A1 SHA1: 87:E4:7C:B8:D7:1A:90:53:FE:1B:70:B6:32:22:5B:83:29:81:53:4B Signature algorithm name: SHA256withRSA Version: 3 Trust this certificate? [no]: yes Certificate was added to keystore 5) To check the contents of the keystore keytool -v -list -keystore identity.jks Enter keystore password: ***************** WARNING WARNING WARNING ***************** * The integrity of the information stored in your keystore * * has NOT been verified! In order to verify its integrity, * * you must provide your keystore password. * ***************** WARNING WARNING WARNING ***************** Keystore type: JKS Keystore provider: SUN Your keystore contains 1 entry Alias name: selfsignedcert Creation date: Jan 18, 2012 Entry type: PrivateKeyEntry Certificate chain length: 1 Certificate[1]: Owner: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Issuer: CN=adejuan-desktop.cl.oracle.com, OU=a, O=e, L=i, ST=o, C=U Serial number: 4f17459a Valid from: Wed Jan 16 15:42:16CLST 2012 until: Thu Jan 15 15:42:16 CLST 2013 Certificate fingerprints: MD5: 7F:08:FA:DE:CD:D5:C3:D3:83:ED:B8:4F:F2:DA:4E:A1 SHA1: 87:E4:7C:B8:D7:1A:90:53:FE:1B:70:B6:32:22:5B:83:29:81:53:4B Signature algorithm name: SHA256withRSA Version: 3 ******************************************* ******************************************* 6) In some cases, this parameter is needed in the server start up parameters. -Dweblogic.ssl.JSSEEnabled=true Otherwise, enable it from the Server configuration -> SSL -> Use JSSE checkbox.

    Read the article

  • What do you do when a client requires Rich Text Editing on their website?

    - by George Stocker
    As we all know by now, XSS attacks are dangerous and really easy to pull off. Various frameworks make it easy to encode HTML, like ASP.NET MVC does: <%= Html.Encode("string"); %> But what happens when your client requires that they be able to upload their content directly from a Microsoft Word document? Here's the scenario: People can copy and paste content from Microsoft word into a WYSIWYG editor (in this case tinyMCE), and then that information is posted to a web page. The website is public, but only members of that organization will have access to post information to a webpage. What is the best way to handle this requirement? Currently there is no checking done on what the client posts (since only 'trusted' users can post), but I'm not particularly happy with that and would like to lock it down further in case an account is hacked. The platform in question is ASP.NET MVC. The only conceptual method that I'm aware of that meets these requirements is to whitelist HTML tags and let those pass through. Is there another way? If not, is the best way to let them store it in the Database in any form, but only display it properly encoded and stripped of bad tags? NB: The questions differ in that he only assumes there's one way. I'm also asking the following questions: 1. Is there a better way that doesn't rely on HTML Whitelists? 2. Is there a better way that relies on a different view engine? 3. Is there a WYSIWYG editor that includes the ability to whitelist on the fly? 4. Should I even worry about this since it will only be for 'private posting' (Much in the same way that a private blog allows HTML From the author, but since only he can post, it's not an issue)? Edit #2: If suggesting a WYSIWYG editor, it must be free (as in speech, or as in beer). Update: All of the suggestions thus far revolve around a specific Rich Text Editor to use: Only provide an editor as a suggestion if it allows for sanitization of HTML tags; and it fulfills the requirement of accepting pasted documents from a WYSIWYG Editor like Microsoft Word. There are three methods that I know of: 1. Not allow HTML. 2. Allow HTML, but sanitize it 3. Find a Rich Text Editor that sanitizes and allows HTML. The previous questions remain (1-4 above). Related Question Preventing Cross Site Scripting (XSS)

    Read the article

  • Post Crosstalk 2012

    - by David Dorf
    This year the Oracle Retail users conference, Crosstalk, had a 20% increase in attendees, which was driven by both new customers and those acquired via Endeca.  As the product assets of Oracle have grown, so has the completeness of the solution set.  This year was marked by the breadth of omni-channel stories. Rose Spicer and her marketing team (see photo on left) always strive for an equal balance of retailer presentations, networking opportunities, and unique experiences -- this year was no exception.  We had 41 different retailers from China, Russia, South Africa, Brazil, Chile, US, Canada and the UK sharing their insights with one another. In all there were 251 executives from 120 iconic brands such as Daphne, Kohl's, Morrisons, Abercrombie & Fitch, Hot Topic, Talbots, Petco, Deckers, Sportmaster, Mr. Price, Falabella, and Disney to name a few. From a product perspective, there were a few new developments from Oracle Retail: Endeca's search engine has been integrated into the ATG commerce platform. The latest Retail Analytics application, Oracle Retail Customer Analytics, is generally available. Oracle Retail previewed a new fully-integrated mobile POS. But the real benefit of attending Crosstalk was hearing about the experiences of retailers and partners.  Here are are a few interesting facts I picked up: At Kohl's, the most popular website accessed by customers within their stores is Facebook.  With all the buzz about showrooming, I was really expecting it to be Amazon. Daphne, a Chinese shoe retailer, is opening 3 new stores per day.  Being located near the factories allows them to have a very agile supply chain as well. Disney Stores have increased sales by 25% at stores upgraded to include Mobile POS.  They continue to lead the pack with excellent customer experiences. Quicksilver reported that 1 in 5 visits to their website comes from a tablet.  More evidence that tablets are replacing traditional PCs in households. By tagging shoes with RFID, Saks is able to ensure all shoe models are on display.  If a model is not being displayed, it has no chance of being sold. Additionally, there were awards, store tours on Michigan Avenue, fireworks at Navy Pier, and the Oracle Retail house band, Bolo313, performing at Solider Field.  Speaking of which, a few retailers got on stage and jammed with band -- possible rival to Rock & Roll Retail? You can always find the latest info from us at the Retail Rack. The next events on tap are the Partner Summit followed by OpenWorld.

    Read the article

  • Open the SQL Server Error Log with PowerShell

    - by BuckWoody
    Using the Server Management Objects (SMO) library, you don’t even need to have the SQL Server 2008 PowerShell Provider to read the SQL Server Error Logs – in fact, you can use regular old everyday PowerShell. Keep in mind you will need the SMO libraries – which can be installed separately or by installing the Client Tools from the SQL Server install media. You could search for errors, store a result as a variable, or act on the returned values in some other way. Replace the Machine Name with your server and Instance Name with your instance, but leave the quotes, to make this work on your system: [reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") $machineName = "UNIVAC" $instanceName = "Production" $sqlServer = new-object ("Microsoft.SqlServer.Management.Smo.Server") "$machineName\$instanceName" $sqlServer.ReadErrorLog() Want to search for something specific, like the word “Error”? Replace the last line with this: $sqlServer.ReadErrorLog() | where {$_.Text -like "Error*"} Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • KVM Slow performance on XP Guest

    - by Gregg Leventhal
    The system is very slow to do anything, even browse a local folder, and CPU sits at 100% frequently. Guest is XP 32 bit. Host is Scientific Linux 6.2, Libvirt 0.10, Guest XP OS shows ACPI Multiprocessor HAL and a virtIO driver for NIC and SCSI. Installed. CPUInfo on host: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping : 7 cpu MHz : 3200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6784.93 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static' cpuset='0'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>SandyBridge</model> <vendor>Intel</vendor> <feature policy='require' name='vme'/> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='osxsave'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='ds'/> <feature policy='require' name='tsc-deadline'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='ht'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='force' name='sse'/> <feature policy='force' name='sse2'/> <feature policy='force' name='sse4.1'/> <feature policy='force' name='sse4.2'/> <feature policy='force' name='ssse3'/> <feature policy='force' name='x2apic'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none'/> <source file='/var/lib/libvirt/images/Server-10-9-13.qcow2'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </disk>

    Read the article

  • A Complete Customer Experience Solution (3 of 3 in 'No Customer Left Behind' Series)

    - by Kathryn Perry
    A guest post by David Vap, Group Vice President, Oracle Applications Product Development In my previous post, I talked about taking three concrete steps to improve your customers' overall experiences: 1) understand your customer, 2) empower your ecosystem, and 3) adapt your business. To do these effectively and efficiently, it's important to find the right technology that can bridge the gaps across your channels, interactions, departments, and repositories. Oracle has spent the past three years and more than six billion dollars acquiring and developing some of the world's best-of-breed applications. The result is the most comprehensive customer experience (CX) portfolio offering in the World - bar none: ATG Best in Class Selling Experiences Fatwire Best in Class Marketing Experiences Inquira Best in Class Support Experiences Endecca Best in Class Search Experiences RightNow Best in Class Service Experiences Vitrue & Involver Best in Class Social Marketing Collective Intellect Best In Class Social Listening We don't expect organizations to eat the CX elephant in one bite, nor should they try to. There are key strategic initiatives within each of the four main pillars of our customer experience offering for which we deliver solutions: 1. Customer Experience for Marketing Social Listening and Engagement Social Marketing Marketing Websites Demand Generation and Lead Management Marketing and Loyalty Management 2. Customer Experience for Commerce Search, Navigation & Content Delivery Cross-Channel Commerce Targeting & Product Recommendations Social Commerce Order Management & Fulfillment Retail Store Operations 3. Customer Experience for Sales Sales Force Automation Social Selling Territory & Quota Management Revenue Forecasting Partner Relationship Management Quote to Cash Incentive Compensation 4. Customer Experience for Service Cross-Channel Customer Service Knowledge Management Social Customer Service Eligibility Management Contracts, Assets, and Entitlements Industry-Specific Solutions eBilling Oracle's customer experience portfolio is socially infused at each layer of our pillars rather than simply bolted on as a side process. This combines with the power of the Cloud to run the parts of the solution that need the access, efficiency, and agility from a managed infrastructure. You can get the compliance control from on-premise backbone infrastructure systems that run your business and don't change that often. Please take advantage of our teams of Oracle customer experience professionals and our key agency and technology partner ecosystem. They can help you develop strategic solution roadmaps that build and deliver customer experience and that are tailored to your business needs and objectives. No one has built a better customer service portfolio to manage the entire customer journey than Oracle. It is backed by CX thought leadership programs, a commitment from our executives, and a worldview that your technology decisions must be driven by your customer experiences to succeed. If you’d like to follow up on this conversation, please leave a comment or contact me at [email protected]. You can get more information on Oracle’s complete customer experience solution here.

    Read the article

  • Space partitioning when everything is moving

    - by Roy T.
    Background Together with a friend I'm working on a 2D game that is set in space. To make it as immersive and interactive as possible we want there to be thousands of objects freely floating around, some clustered together, others adrift in empty space. Challenge To unburden the rendering and physics engine we need to implement some sort of spatial partitioning. There are two challenges we have to overcome. The first challenge is that everything is moving so reconstructing/updating the data structure has to be extremely cheap since it will have to be done every frame. The second challenge is the distribution of objects, as said before there might be clusters of objects together and vast bits of empty space and to make it even worse there is no boundary to space. Existing technologies I've looked at existing techniques like BSP-Trees, QuadTrees, kd-Trees and even R-Trees but as far as I can tell these data structures aren't a perfect fit since updating a lot of objects that have moved to other cells is relatively expensive. What I've tried I made the decision that I need a data structure that is more geared toward rapid insertion/update than on giving back the least amount of possible hits given a query. For that purpose I made the cells implicit so each object, given it's position, can calculate in which cell(s) it should be. Then I use a HashMap that maps cell-coordinates to an ArrayList (the contents of the cell). This works fairly well since there is no memory lost on 'empty' cells and its easy to calculate which cells to inspect. However creating all those ArrayLists (worst case N) is expensive and so is growing the HashMap a lot of times (although that is slightly mitigated by giving it a large initial capacity). Problem OK so this works but still isn't very fast. Now I can try to micro-optimize the JAVA code. However I'm not expecting too much of that since the profiler tells me that most time is spent in creating all those objects that I use to store the cells. I'm hoping that there are some other tricks/algorithms out there that make this a lot faster so here is what my ideal data structure looks like: The number one priority is fast updating/reconstructing of the entire data structure Its less important to finely divide the objects into equally sized bins, we can draw a few extra objects and do a few extra collision checks if that means that updating is a little bit faster Memory is not really important (PC game)

    Read the article

  • Thinktecture.IdentityServer RC

    - by Your DisplayName here!
    I just uploaded the RC of IdentityServer to Codeplex. This release is feature complete and if I don’t get any bug reports this is also pretty much the final V1. Changes from B1 The configuration data access is now based on EF 4.1 code first. This makes it much easier to use different data stores. For RTM I will also provide a SQL script for SQL Server so you can move the configuration to a separate machine (e.g. for load balancing scenarios). I included the ASP.NET Universal Providers in the download. This adds official support for SQL Azure, SQL Server and SQL Compact for the membership, roles and profile features. Unfortunately the Universal Provider use a different schema than the original ASP.NET providers (that sucks btw!) – so I made them optional. If you want to use them go to web.config and uncomment the new provider. The relying party registration entries now have added fields to add extra data that you want to couple with the RP. One use case could be to give the UI a hint how the login experience should look like per RP. This allows to have a different look and feel for different relying parties. I also included a small helper API that you can use to retrieve the RP record based on the incoming WS-Federation query string. WS-Federation single sign out is now conforming to the spec. Certificate based endpoint identities for SSL endpoints are optional now. Added a initial configuration “wizard”. This sets up the signing certificate, issuer URI and site title on the first run. Installation This is still a “developer” release – that means it ships with source code that you have to build it etc. But from that point it should be a little more straightforward as it used to be: Make sure SSL is configured correctly for IIS Map the WebSite directory to a vdir in IIS Run the web site. This should bring up the initial configuration Make sure the worker process account has access to the signing certificate private key Make sure all your users are in the “IdentityServerUsers” role in your role store. Administrators need the “IdentityServerAdministrators” role That should be it. A proper documentation will be hopefully available soon (any volunteers?). Please provide feedback! thanks!

    Read the article

  • Qt's future in the light of Nokia-Microsoft partnership

    - by Shinnok
    In case you missed it, a lot has happened in the last two day that could potentially impact the Qt framework, for the worse. :-( It will impact the mobile sector in several and probably not currently acknowledged ways, for sure. It started yesterday with Nokia's CEO Stephen Elop internal letter depicting Nokia sitting on a burning platform and the need for a big and aggressive shift in business. A day later, at the Nokia World conference, Nokia announced the partnership with Microsoft , which at the moment resumes to Nokia adopting the Windows Phone 7 platform and development environment, dumping Symbian along the road and tagging Meego as R&D(a pretty dangerous keyword if you ask me), as for Maemo/N900 series i guess it's bye bye for good. I know what you're thinking but no, Qt is not going to be ported to the Window Phone platform. And i'm also scared about this. You can watch the Elop & Ballmer joint press release here. Now after reading this huge thread on the Qt-interest mailing list i can't help but wonder, what is the future of Qt at Nokia, now that they aren't focused(at all?) on Qt anymore(remember the full focus switch on Qt as main development framework for all Nokia products(including Symbian, yes) back in October?). I love Qt, in my opinion it is the only true cross-platform application development framework and one of the few to make C++ development a joy(to the extent possible) and good things has happened to the framework and considerable momentum while under Nokia, thus i am wondering, what are the chances that Qt might suffer a slow death at Nokia after this? Yes i know about KDE.org and the fact that Qt is easily spawnable, but i still feel uneasy. It also must be horrible for all of the efforts either by Nokia employees or third parties that have gone into Symbian and all of the Ovi Store Symbian/Qt content and business and why not, Maemo/Meego. There are also massive layouts planned, i suspect Symbian techs and Qt? I'd love to hear your input on this? Is Qt future safe&proof? LE: The question as been gradually revised, improved and better referenced, thus you might want to throw a quick re-read to see what you might have missed.

    Read the article

  • Extending the ADF Controller exception handler

    - by frank.nimphius
    The Oracle ADF controller provides a declarative option for developers to define a view activity, method activity or router activity to handle exceptions in bounded or unbounded task flows. Exception handling however is for exceptions only and not handling all types of Throwable. Furthermore, exceptions that occur during the JSF RENDER RESPONSE phase are not looked at either as it is considered too late in the cycle. For developers to try themselves to handle unhandled exceptions in ADF Controller, it is possible to extend the default exception handling, while still leveraging the declarative configuration. To add your own exception handler: · Create a Java class that extends ExceptionHandler · Create a textfile with the name “oracle.adf.view.rich.context.Exceptionhandler” (without the quotes) and store it in .adf\META-INF\services (you need to create the “services” folder) · In the file, add the absolute name of your custom exception handler class (package name and class name without the “.class” extension) For any exception you don't handle in your custom exception handler, just re-throw it for the default handler to give it a try … import oracle.adf.view.rich.context.ExceptionHandler; public class MyCustomExceptionHandler extends ExceptionHandler { public MyCustomExceptionHandler() {      super(); } public void handleException(FacesContext facesContext,                              Throwable throwable, PhaseId phaseId)                              throws Throwable {    String error_message;    error_message = throwable.getMessage();    //check error message and handle it if you can    if( … ){          //handle exception        …    }    else{       //delegate to the default ADFc exception handler        throw throwable;}    } } Note however, that it is recommended to first try and handle exceptions with the ADF Controller default exception handling mechanism. In the past, I've seen attempts on OTN to handle regular application use cases with custom exception handlers for where there was no need to override the exception handler. So don't go for this solution to quickly and always think of alternative solutions. Sometimes a try-catch-final block does it better than sophisticated web exception handling.

    Read the article

  • Increase application performance

    - by Prayos
    I'm writing a program for a company that will generate a daily report for them. All of the data that they use for this report is stored in a local SQLite database. For this report, the utilize pretty much every bit of the information in the database. So currently, when I query the datbase, I retrieve everything, and store the information in lists. Here's what I've got: using (var dataReader = _connection.Select(query)) { if (dataReader.HasRows) { while (dataReader.Read()) { _date.Add(Convert.ToDateTime(dataReader["date"])); _measured.Add(Convert.ToDouble(dataReader["measured_dist"])); _bit.Add(Convert.ToDouble(dataReader["bit_loc"])); _psi.Add(Convert.ToDouble(dataReader["pump_press"])); _time.Add(Convert.ToDateTime(dataReader["timestamp"])); _fob.Add(Convert.ToDouble(dataReader["force_on_bit"])); _torque.Add(Convert.ToDouble(dataReader["torque"])); _rpm.Add(Convert.ToDouble(dataReader["rpm"])); _pumpOneSpm.Add(Convert.ToDouble(dataReader["pump_1_strokes_pm"])); _pumpTwoSpm.Add(Convert.ToDouble(dataReader["pump_2_strokes_pm"])); _pullForce.Add(Convert.ToDouble(dataReader["pull_force"])); _gpm.Add(Convert.ToDouble(dataReader["flow"])); } } } I then utilize these lists for the calculations. Obviously, the more information that is in this database, the longer the initial query will take. I'm curious if there is a way to increase the performance of the query at all? Thanks for any and all help. EDIT One of the report rows is called Daily Drilling Hours. For this calculation, I use this method: // Retrieves the timestamps where measured depth == bit depth and PSI >= 50 public double CalculateDailyProjectDrillingHours(DateTime date) { var dailyTimeStamps = _time.Where((t, i) => _date[i].Equals(date) && _measured[i].Equals(_bit[i]) && _psi[i] >= 50).ToList(); return _dailyDrillingHours = Convert.ToDouble(Math.Round(TimeCalculations(dailyTimeStamps).TotalHours, 2, MidpointRounding.AwayFromZero)); } // Checks that the interval is less than 10, then adds the interval to the total time private static TimeSpan TimeCalculations(IList<DateTime> timeStamps) { var interval = new TimeSpan(0, 0, 10); var totalTime = new TimeSpan(); TimeSpan timeDifference; for (var j = 0; j < timeStamps.Count - 1; j++) { if (timeStamps[j + 1].Subtract(timeStamps[j]) <= interval) { timeDifference = timeStamps[j + 1].Subtract(timeStamps[j]); totalTime = totalTime.Add(timeDifference); } } return totalTime; }

    Read the article

  • Creating metadata value relationships

    - by kyle.hatlestad
    I was recently asked an question about an interesting use case. They wanted content to be submitted into UCM with a particular ID in a custom metadata field. But they wanted that ID to be translated during submission into an employee name in another metadata field upon submission. My initial thought was that this could be done with a dependent choice list (DCL). One option list field driving the choices in another. But this didn't work in this case for a couple of reasons. First, the number of IDs could potentially be very large. So making that into a drop-down list would not be practical. The preference would be for that field to simply be a text field to type in the ID. Secondly, data could be submitted through different methods other then the web-based check-in form. And without an interface to select the DCL choices, the system needed a way to determine and populate the name field. So instead I went the approach of having the value of the ID field drive the value of the Name field using the derived field approach in my rule. In looking at it though, it was easy to simply copy the value of the ID field into the Name field...but to have it look up and translate the value proved to be the tricky part. So here is the approach I took... First I created my two metadata fields as standard text fields in the Configuration Manager applet. Next I create a table that stores the relationship between the IDs and Names. I then create a View into that table and set the column to the EmployeeID. I now create a new Application Field and set it as an option list using the View I created in the previous step. The reason I create it as an Application field is because I don't need to display the field or store a value in it. I simply need to make use of the option list in the next step... Finally, I create a Rule in which I select the Employee Name field and turn on the 'Is derived field' checkbox. I edit the derived value and add a new condition. Because the option list is a Application field and not an Information field, I can't use the Compute button. Instead, I insert this line directly in the Value field: @getFieldViewValue("EmployeeMapping",#active.xEmployeeID, "EmployeeName") The "EmployeeMapping" parameter designates that the value should be pulled from the EmployeeMapping Application field that I had created in the previous step. The #active.xEmployeeID field is the ID value that should be pulled from what the user entered. "EmployeeName" is the column name in the table which has the value which corresponds to the ID. The extracted name then becomes the value within our Employee Name field. That's it. You can then add additional Rules to make the Name field read-only/hidden on the check-in page and such.

    Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >