Search Results

Search found 12759 results on 511 pages for 'keyboard events'.

Page 363/511 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Resolving System Restore error - Error 0x800423F3 - The writer experienced a transient error

  - by Gishu

  System restore just stopped working, when I needed it most. (tried diff restore points... same error). Now everytime I run system-restore, it fails with the above error message. I cleared the event logs and retried to isolate the relevant events. I see 5 warnings and 1 info event from VSS and 1 error from System Restore. Here's the first warning from VSS and the error http://dl.dropbox.com/u/11733224/SystemRestore-FirstWarning.txt http://dl.dropbox.com/u/11733224/SystemRestore-FirstError.txt Tried a lot of stuff, but in vain; this error still persists.

  Read the article

• SQL Server crashes when remote query fails

  - by Hemanshu Bhojak

  Setup: I have a linked server setup on SQL Server 2005 which is pointing to an Oracle DB. The linked server has RPC enabled. Problem: When a query throws an exception on the remote server (Oracle DB) the SQL Server instance crashes. The logs say that the crash was due to some problem with the RPC call. Is there a way in which I can prevent the entire server to collapse but also use RPC over my linked server. EDIT: Event Log SQL Server is terminating because of fatal exception c0000005. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling. Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• Exchange 2010 to Exchange 2010 Public Folder Replication

  - by Archit Baweja

  We have 2 exchange servers in our org. MX1 and MX2. I'm trying to replicate all MX1 public folders to MX2. I've setup replication for all the toplevel folders to include the MX2 server. However no public folders are being replicated. The event log does not show any errors. I've set the diagnostic level for all public folder diagnostics to Highest using get-eventloglevel "MSExchangeIS\9001 Public\*" | set-eventloglevel -Level Expert However besides a 3092 event ID (type: 0x2) generated on MX1 (the source server), there are no events being generated that would notify me of any issues. Some technical details. MX1 is Windows 2008 Standard, MX2 is Windows 2008 Enterprise (eval mode right now).

  Read the article

• Logfiles go blank after logrotate rotates them.

  - by Hilt86

  I have an ubuntu 8.04 LTS server that runs openvpn. The openvpn server writes to a standard logfile under /var/log and prior to a month ago logrotate would automatically rotate the files and compress them. The files are still being rotated however the new logfile (ovpn.log) is empty. Restarting the openvpn daemon fixes the issue (ie: openvpn writes status events to the file) but after about 10 days the file is rotated again openvpn can't write to the logfile again. This is also strange because logrotate is set to rotate every 6 months. Openvpn runs as nobody and the logfiles are owned by root and admin which is strange because it should either work at all times or not work at all if the permissions are the cause, unless openvpn runs as root temporarily and then drops down to nobody after initializing ?

  Read the article

• Resolving System Restore error - Error 0x800423F3 - The writer experienced a transient error

  - by Gishu

  System restore just stopped working, when I needed it most. (tried diff restore points... same error). Now everytime I run system-restore, it fails with the above error message. I cleared the event logs and retried to isolate the relevant events. I see 5 warnings and 1 info event from VSS and 1 error from System Restore. Here's the first warning from VSS and the error http://dl.dropbox.com/u/11733224/SystemRestore-FirstWarning.txt http://dl.dropbox.com/u/11733224/SystemRestore-FirstError.txt Tried a lot of stuff, but in vain; this error still persists.

  Read the article

• How to get Facebook-Feeds in Trillian without connecting to Facebook-Chat?

  - by Protron

  I installed the trial of Trillian 5.0 Build 22 (I don't know if the version 4 Astra is any different). I successfully added my Facebook account so I can see my facebook news on Trillian and works great. The problem is that I don't want to use the Facebook-chat, and if I disconnect the Facebook-chat the rest of the facebook stuff (news, events, groups, request) also disappears. I tried by setting the Facebook status to Away; and I'm not sure if someone can chat with me if I choose that; but anyway I still have the contacts list full of people I don't want. EDIT: Maybe I wasn't clear enough about the Facebook part. And that might be why some people fell this is off-topic. But when I talk about Facebook in this question, I'm not referring to the Facebook site at any point. I'm mean the Facebook plugin of Trillian (and it's not an user plugin; it's a built-in plugin).

  Read the article

• Adobe Reader unusably slow on Mac OS X 10.6.6

  - by vwegert

  We've got two Macs that are both running 10.6.6. On my MBP, Adobe (Acrobat) Reader started behaving weird a few weeks ago. It became very sluggish, started missing mouse clicks or mouse button releases, scrolling was next to impossible. Most of the time it does not handle Page Up / Page Down events at all. Zooming works erratically if at all. It's basically unusable. On the other Mac (an iMac), there are no such problems. I've tried to remove and reinstall Adobe Reader as well as upgrading to the latest version, but unfortunately without success. This is the only software that is behaving strangely on this Mac, everything else is working fine. What else could I try?

  Read the article

• Can Windows-Security-SPP block execution of .exe?

  - by Kirk Marple

  We're seeing a strange situation, where some executables won't run from a Windows command prompt (running as admin). Just running the command (say, filename.exe) gives no response on the console. No errors, no output, nothing. If we copy over the same Windows .exe from a different folder, it "magically" starts working, and we see the default console output. (Happens both on Win7 x64, and Win2008R2 x64. Application is running as 32-bit process.) At the time when it accesses the .exe, I can see events in the application and system logs regarding Windows-Security-SPP, and it makes me believe that the .exe is being blocked from execution. Does this sound familiar?

  Read the article

• Sharepoint 2007 Event ID 6482

  - by Dave M

  Our two server SharePoint 2007 SP2 farm has an issue. Event ID 6482 appears in the Application log of the Web front end many times a day. Often many time a minute. The full error is from Office SharePoint Server Event Type: Error Event Source: Office SharePoint Server Event Category: Office Server Shared Services Event ID: 6482 Date: 11/12/2009 Time: 3:05:22 PM User: N/A Computer: XXXXXX Description: Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (36a9b7ef-59aa-4f94-8887-8bf7b56f2f91). Reason: Error during encryption or decryption. System error code 0. Techinal Support Details: System.ArgumentException: Error during encryption or decryption. System error code 0. at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.SynchronizeDefaultContentSource(IDictionary applications) at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize() at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The SharePoint site appears to be functioning normally and Search returns expected results. Any suggestions would be appreciated

  Read the article

• My computer freezes irregularly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• System randomly Crashing

  - by Hailwood

  Hi guys, Computer is running windows XP. seems to be crashing randomly, no pattern in its timing or activity to cause it. What could be causing this/how do I diagnose this? Event log shows Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 22/02/2011 Time: 7:10:05 p.m. User: N/A Computer: YOUR-8ABC512DA0 Description: Error code 1000008e, parameter1 c0000005, parameter2 bf801b50, parameter3 ee118c44, parameter4 00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 38 1000008 0020: 65 20 20 50 61 72 61 6d e Param 0028: 65 74 65 72 73 20 63 30 eters c0 0030: 30 30 30 30 30 35 2c 20 000005, 0038: 62 66 38 30 31 62 35 30 bf801b50 0040: 2c 20 65 65 31 31 38 63 , ee118c 0048: 34 34 2c 20 30 30 30 30 44, 0000 0050: 30 30 30 30 0000

  Read the article

• OCS 2007: Issues with /LiveServer/MCUFactory

  - by routeNpingme

  I'm not really an Office Communications Server expert, but just trying to resolve some seemingly minor issues with a new install... The following error is occurring in the OCS event log, and when I try to visit https://servername:444/LiveServer/MCUFactory in Internet Explorer to test the address, I just get a "page cannot be displayed" error. I can telnet to port 444 on the server and verify that the port is open and listening. Any ideas? Event Type: Error Event Source: OCS MCU Infrastructure Event Category: (1022) Event ID: 61013 Date: 7/28/2009 Time: 8:47:42 AM User: N/A Computer: COMM2 Description: The process DataMCUSvc(1284) failed to send health notifications to the MCU factory at https://servername:444/LiveServer/MCUFactory/. Failure occurrences: 29, since 7/28/2009 8:40:27 AM. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• What is this jumper for on my new motherboard?

  - by jasondavis

  I am building a new PC, I just got my motherboard in the mail today. It is a ASRock X58 Extreme 3. I am reading over the manual for it and one of the jumpers says this. There is a 3 pin jumper labeled 1 2 3, with pins 1 and 2 shorted by default it is "+5v" If I manually change it to short jumper pins 2 and 3 instead of 1 and 2 then it will be "+5vSB (standby) for PS/2 or USB wake up events. So I am confused as to exactly what this is for. Can someone explain what it means, why I would want one other the other?

  Read the article

• error exporting data using mysql workbench

  - by Rajneesh Rana

  hi, i have been getting warning of version mismatch when i was trying to export data dump using mysql workbench. So, i copied mysqldump from mysql server folder and placed it in workbench folder. Now when i am trying to export data i am getting error Operation failed with exitcode -1073741819 here is a entry of log 16:31:25 Dumping wordpress (wp_posts) Running: "mysqldump.exe" --defaults-extra-file="c:\docume~1\rajneesh.r\locals~1\temp\1\tmpxau7tz" --no-create-info=FALSE --order-by-primary=FALSE --force=FALSE --no-data=FALSE --tz-utc=TRUE --flush-privileges=FALSE --compress=FALSE --replace=FALSE --host=localhost --insert-ignore=FALSE --extended-insert=TRUE --user=root --quote-names=TRUE --hex-blob=FALSE --complete-insert=FALSE --add-locks=TRUE --port=3306 --disable-keys=TRUE --delayed-insert=FALSE --create-options=TRUE --delete-master-logs=FALSE --comments=TRUE --default-character-set=utf8 --max_allowed_packet=1G --flush-logs=FALSE --dump-date=TRUE --lock-tables=TRUE --allow-keywords=FALSE --events=FALSE "wordpress" "wp_posts" Operation failed with exitcode -1073741819 Please help me with these issues Thank You

  Read the article

• Default Document not posting for IIS 7

  - by Nikshep

  I am using URL rerouting in Asp.net 4.0 and my default page for the site is \home where user's can log in the app.So when the users type in my site's url i.e www.domain.com cause of the defualt page config which I have it gets redirected to my home.aspx page which is mapped on my global.asax as \home. Now all the log in request i.e Post request coming from www.domain.com are failing no events are being fired on the server. Where as if I try www.domain.com\home then things starts working I am able to log on. I had read a similar issue but still am confused about the solution http://forums.iis.net/t/1164877.aspx , this used to work fine on IIS 6 but on IIS 7 such a scenario started happening. Am I missing some configuration , please help.

  Read the article

• Adeos's role w.r.t Linux

  - by Anisha Kaul

  The event pipeline The fundamental Adeos structure one must keep in mind is the chain of client domains asking for event control. A domain is a kernelbased software component which can ask the Adeos layer to be notified of: · Every incoming external interrupt, or autogenerated virtual interrupt; · Every system call issued by Linux applications, · Other system events triggered by the kernel code (e.g. Linux task switching, signal notification, Linux task exits etc.). From: Life with Adeos: http://www.xenomai.org/documentation/xenomai-2.4/pdf/Life-with-Adeos-rev-B.pdf Question: Adeos is supposed to be between the hardware and the Linux kernel, I can understand about Adeos telling the Linux about hardware interrupts but Why should Adeos know about the "system call" issued by Linux?

  Read the article

• Problems accessing FileZilla FTP Server from static IP

  - by Kurru

  I'm trying to connect to my FTP server from my external IP address on Comcast Business. On the gateway I've set up port-forwarding on ports 20-21 to my server. Additionally I've forwarded ports 7000-8000 to my server for use in passive mode. In my FileZilla Server application I've set up passive mode to use my static IP and to use the subset of ports listed above. Unfortunately, it doesn't work through the external static IP for some reason, but I can internally. When I try to connect through static IP, the FileZila monitor says Connected, sending welcome message.... 220 FileZillaServer version 0.9.37 beta could not send reply, disconnected My firewall doesn't register any block events and windows firewall is disabled. What am I doing wrong or missing?

  Read the article

• Windows Server 2008 (sp2) stops responding on network share requests from Windows Vista and 7 client

  - by Peter LaComb Jr.

  I have two Windows Server 2008 SP2 machines (TFS and TFSBUILD). Periodically, the TFSBUILD server shares (\TFSBUILD\ShareName or \TFSBUILD\C$) become unresponsive to requests from Windows Vista (Server 2008) and Windows 7 client requests. Windows XP machines are still able to connect. No events in the server log indicate any problem. A simple restart corrects the issue temporarily, but it always returns. No, it is not this http://support.microsoft.com/kb/976266 (we aren't using that software). All anti-virus software has been disabled, firewall is disabled by policy. No other network activity is affected. Any help would be greatly appreciated.

  Read the article

• IIS won't start

  - by doekman

  When I startup my computer, pages from my local webserver (IIS) won't load. In the event viewer(System log) I get the error below. The only way I get IIS to work again is to issue an iisreset.exe. I have Windows XP. Any ideas to fix this? Event Type: Warning Event Source: W3SVC Event Category: None Event ID: 36 Date: 27-4-2010 Time: 10:30:47 User: N/A Computer: NLD4P4Z2J Description: The server failed to load application '/LM/W3SVC'. The error was '8007045b'. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Access Denied Error in PagesListCPVEventReceiver post SharePoint SP2 upgrade

  - by JD

  I am seeing the following errors from one of the SharePoint Web Front Ends after the SP2 upgrade. Has anyone else seen this error or a solution? Event Type: Error Event Source: Windows SharePoint Services 3 Event Category: General Event ID: 6875 Date: 2009-10-27 Time: 13:09:57 User: N/A Computer: XXXXXXX Description: Error loading and running event receiver Microsoft.SharePoint.Publishing.PagesListCPVEventReceiver in Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Additional information is below. : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• All of ESX4 hosts not responding after rebooting vCenter server

  - by hojyokinmo

  Hello I'm constructing 5ESX+a vCenter serv. I'm testing FT on the system. Today vCenter OS (W2008) demanded system reboot. After rebooting vCenter Serv. All of ESX hosts have alert icon. end indicate "not responding" I tried to connect ESX (version 4) hosts to vCenter again. Once they came back normally, but after few seconds ,They turned red again. All of them have ping connection to vCenter serv. There are no red messages in Tusks and events. Two messages are found in Summary of Cluster ·There aren't sufficient resource for HA failover. ·Can't contact primary HA agent. I'm also not able to reset FT configuration because all of VMS aren't accessed from vCenter What should I do?

  Read the article

• (OS 10055) Queue full

  - by Ali

  I'm using apache with mysql on the other server, apache on windows 2003 with 4gb ram 3 dual core CPU My server keep on running smoothly without any issue for about 3 days or roundabout 60+ hours however between 60-70 hours my apache stop working & log events shows this error, I tried to search a lot but helpless, I have already increased max port, please if someone can help ? (OS 10055)An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. : make_sock: unable to listen for connections on address 0.0.0.0:80

  Read the article

• How to disable augroup in vim?

  - by Andrew Vit

  I understand that in my vimrc I can add autocmd, and I can group them into augroup. Once they are grouped, what can I do with the group? Specifically, is there a way to disable the whole group at once? Looking at the help, I only see two options: augroup! will delete the whole group: I don't think this is right since I will want to re-enable it again. Searching for "aucmd" and "disable" brings up eventignore, but this looks like it's for specific events like CursorMoved, BufWinLeave, etc. and not the command or the group itself. How is this done?

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >