Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 364/1213 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• What does "fully supported" mean in context of Radeon Opensource Video Driver?

  - by stevecoh1

  UPDATE: This is not a request for support of my specific issue. Details of that issue are here: How to recover from bad upgrade to 13.04 (Unity very slow) . I have "solved" that issue, for the time being anyway, by loading alternative lighter weight desktops. This question was opened specifically to question the meaning of the documentation at https://help.ubuntu.com/community/RadeonDriver . END OF UPDATE There it is, in Black and White: https://help.ubuntu.com/community/RadeonDriver Fully Supported All these Radeon(HD) cards and derivatives have good 3D acceleration support. This is not an exhaustive list: ... RV610/RV630 Radeon HD 2400/2600/2700/4200/4225/4250 Yet in my case (the HD2400) this proves to be manifestly untrue, at least if "Fully Supported" means sufficient to run Unity in Ubuntu 13.04. It runs all the applications I can launch under Unity, but Unity itself is unbearably slow. It's quite striking really. Click on the "Dash" - go get a cup of coffee. Type a key in the Unity search box, wait five seconds for it to appear. Type Alt-tab and wait five seconds for the screen to finish painting. None of these issues appear outside of Unity components. As you all know, there are complaints about slow performance all over the Internet about Unity. Shouldn't this page somehow address this issue? Especially if "fully supported" doesn't mean sufficiently to run the default modern Ubuntu release. What does "fully supported" mean?

  Read the article

• Screen corruption with 946G / 82945G/GZ

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks1 the GUI as you see in the ![image and the entire computer is very slow: I'm running Ubuntu 11.04 and Intel graphics card 945G x86/MMX/SSE2 I used Unity and Gnome 3 with the same results. lspci--- 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• No boot record when installing 13.04 from USB on WinXP

  - by Phil Leslie

  I'm replacing WinXP with 13.04 on an older PC using wubi.exe on a USB stick. I had no problem changing the BIOS on another system that was a bit newer but when I change the settings on the older PC to boot from USB, I get a DOS message saying "Searching for boot record...Not found" & asked to try again. I don't have the ability to boot from a live CD so is there a reason why I can boot from a USB on a newer computer but can't from an older one? Both have options to choose to boot from USB, but the older one can find no boot record. The system was built on 12/13/01 by American Megatrends. Since I don't have enough "reputation points" to post the screen shot image, you can see it at http://img.photobucket.com/albums/v633/boonevillephil/1029131748-00.jpg.

  Read the article

• Bash command history not working

  - by creepylol

  The command history between sessions is not getting saved. I'm using guake and the history for the session is working fine. I noticed that .bash_history had some commands I executed in "sudo -s" mode and tried the same again and all the commands while in the session got saved so I tried "chmod 777 .bash_history" Now the old commands appear at the start of a session but no new commands are getting saved Thanx in advance

  Read the article

• How to retrieve packages from an ISO?

  - by Santosh Kumar

  I have an ISO image of BackTrack and I want to try it, but I don't want to mess up my bootloader with installing 2 Linuxes and a Windows. As BackTrack is Debian based I want to use its packages in my current Ubuntu. I tried mounting the ISO with Archive Mounter but whole operating system seems to be in casper/filesystem.squashfs file. I have seen this answer but none of those methods work, because I can't find any pool directory. The only file I suspect is filesystem.squashfs which is 3.3 GB in size. Please help me install tools from BackTrack's ISO.

  Read the article

• Cant mount cryptswap1 ?

  - by Jordan March

  From the reading I've done, it seems it's having issues mounting the encrypted files. The guys here: could not mount /dev/mapper/cryptswap1 Seem to be suggesting how to fix it, but I am new to Linux and have NO idea how to do any of that. Can anyone walk me through how to edit that file? Or should I just reinstal? Is there a way to reinstall and keep my programs? I do have separate partitions for boot root home and swap Running Acer Aspire 5750 Intel Core i3 4gb ram Ubuntu 12.10 64bit

  Read the article

• System in low-graphics mode

  - by Artem Moskalev

  I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

  Read the article

• Ubuntu slow on HP 2000 notebook with Apu e1-1200

  - by user169861

  I am using HP 2000 notebook which initially came with Windows 7 64bit. It has 4gb ram, AMD APU E1-1200 (1.4ghz) with Radeon 7310. With Windows it worked ok, so I decided to switch to Ubuntu. I installed 13.04 64bit at first, but responsiveness wasn't that good (opening windows, menus, Firefox, dash search) even if it was way better during the testing from live USB. I tried different kind of drivers for graphic card, 13.6beta, 13.4, fgrlx proprietary, upgraded kernel but the situation was the same. Then I tried installing 32bit version but the results were identical. After that I tried LTS version 12.04 and Xubuntu 13.04.. Responsiveness wasn't that different at all. Not sure what to do, and I wouldn't want to go back to Windows. This machine is not a beast, but it should be enough to deal with Unity or Xfce without troubles. Oh yes, I have insydeH20 BIOS with not so many options at my disposal. Thanks and best regards,

  Read the article

• I've changed default shell but my terminal don't get it

  - by om-nom-nom

  Recently I've changed my default shell from bash to zsh like this: chsh -s /bin/zsh myname But when I invoke a new terminal (e.g. using ctrl+alt+T) I still have bash loaded: myname@machine:~$ cat /etc/passwd | grep myname myname:x:1000:1000:myname,,,:/home/myname:/bin/zsh myname@machine:~$ echo $SHELL /bin/bash zsh is installed and can be explicitly runned with zsh command. How to deal with that?

  Read the article

• When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

  - by Jessica K

  I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

  Read the article

• Cursor running wild, then crashes on an Asus G73sw

  - by Yarchmon

  The cursor sometimes goes wild, I get random clicks, the windows are resizing, the cursor disappears. In the worst case, clicks and keyboards are disabled. I've tried the solution given on doc.ubuntu-fr.org and add tu grub : i8042.nomux=1 i8042.reset=1 in GRUB_CMDLINE_LINUX_DEFAULT But it didn't work What can I do ? Graphic card : Geforce GTX460M. Ubuntu : 11.10 (64 bits). Laptop Asus G73sw Interface : Unity (since 11.10) - didn't get this problem with Gnome before. Complement: when a window is resizing, it gets drag-boxes at every corner, center of sides and center of the window. It looks like my touchpad sends random info, or like a "ghost" touchscreen. lspci result : 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GTX 460M] (rev a1) 01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Edit 01-09-12: Tried on Ubuntu 2D: the behavior is different: it's like i'm randomly clicking on the workspace switcher icon. In the worst case, it can happen several times in a minute.

  Read the article

• Where should I store 3rd party jar (Java archive) files?

  - by Martijn

  Hi folks, What would be the best place to save jar files of libraries I want to use in a project, that are not in any repositories, and how should I set permissions? Should I put them in /usr/share/java, or is it better to store them somewhere in my home folder? What would be the most usefull access rights? Does it make sense to follow the convention in /usr/share/java of making a symlink with the package name to the specific version of the jar, and follow the permissions as used there?

  Read the article

• How do I get rid of the drive mount confirmation question for sshFS on boot?

  - by Dave M G

  With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

  Read the article

• How do I get localized names of application in python?

  - by Mystic-Mirage

  This code gives me only English application name if .desktop file does not have "Name[*]" options (like in totem.desktop) but only "X-Ubuntu-Gettext-Domain: totem": from gi.repository import Gio app = Gio.app_info_get_default_for_type('video/x-flv', True) print app.get_name() This like code gives me proper result for vlc.desktop. Ubuntu Dash shows proper localized names for all applications. How do I get localized names of application in python? Sorry for my English.

  Read the article

• Wubi 12.04 boot error message

  - by Leandro

  Im having a boot problem with my Wubi 12.04 system. When Ubuntu starts to boot up, a message will appear in my screen and it's something like: T#s..... does not exist Sorry, I couldn't read all the message. Then another message pop-out after Ubuntu loading screen this time the message is this: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -check rootdelay= (did the system wait long enough?) -check root= (did the system wait for the right device?) -missing module (cat /proc/module: ls /dev) ALERT! /dev/disk/by/by_uuid/EODC2345DC231576 does not exist. Dropping to a shell

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• How to turn off Libnotify notifications only when sound is in muted state?

  - by Michael Butler

  I have a multimedia keyboard that allows me to easily mute the sound (Ubuntu 12.04). It would be nice to "link" this to also turn off libnotify messages that pop-up in the top right corner (i.e. Pidgin messages). So when Ubuntu is muted, no libnotify messages would pop up. When not muted, messages show as normal. Is this possible with a script of some kind or would it require changing source code?

  Read the article

• How do I get a Belkin F5D8053 wireless adapter working?

  - by disassembler

  I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

  Read the article

• Which version control system to use?

  - by deshmukh

  I am looking at using a version control system to ensure that I can go back in time to a particular version for all documents in ~, if I have to. What is the best suited tool for this given that: I am without much experience in version control systems Several files will be plain text files but there will be some Libre-Office files also The tool should: Be easy to set-up, run and maintain Have easy to understand configuration options (what directories to track, for how long, how frequently the changes should be captured, etc.) Ideally have a GUI front also Be able to recover deleted files What is the best/ most widely used tool that will be suitable for me?

  Read the article

• How do I connect to Ubuntu One after changing the password?

  - by rumtscho

  I changed my password for Ubuntu One using the Web interface, and added a new computer. Since then, the old computer does not synchronize with Ubuntu One. It doesn't show any error messages or such, but files uploaded from the web interface or changed on the newly added computer don't appear/change on the old computer. I guess that it can't connect because it is still using the old password. The problem is that I can't find an interface to change the password the client is using to connect to the service. The "manage account" option opens the Web interface. I looked into the keyring, and found the key for Ubuntu One, but there I only see an encrypted version of the password, so I can't change it there. So what is the correct way to tell my client that my account password has changed? Edit this is what I see when I open Preferences -- Ubuntu One. Is there something wrong with it? It also stubbornly insists that it has successfully synchronized. But the files I have added from other computers are not in my Ubuntu One folder.

  Read the article

• mount old ATA disk to USB adapter

  - by 213441265152351

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

  Read the article

• Ubuntu 12.4 cursor changes

  - by mantic0

  I have a weird problem with my Ubuntu 12.4 dual screen setup (Toshiba laptop + one monitor). After a while the cursor on one screen completely changes its shape (not every time). I don't really know how to describe it because it's always something else. Sometimes I get four or five vertical lines instead of a cursor, sometimes I can only see part of the cursor, etc, sometimes weird shade appears. This only happens on one screen simultaneously. If I go to the other screen, the cursor appears to be fine but when I change screens, the cursor changes. I tried to do a screenshot but when I do, the cursor looks just fine. I'm using Unity and Gnome 3 but the problem is on both desktop environments. Nothing is wrong with my screen though because I'm also using Windows and I don't have any problems there.

  Read the article

• Is it possible to get a Proxy Authentication Dialog with Ubuntu Server?

  - by Johnny Bigoode

  I've got a VM Virtual Box with Ubuntu Server. I'set the http_proxy variable using export http_proxy="http://1234:linux@proxy:8080" The problem is that Ubuntu will constantly try to connect to the internet, even when I'm not logged in my company's account, so everyday I need to reset my password since Ubuntu will constantly try to access the internet. Also, it's always a problem when I need to authenticate the proxy with a different user/password. Can't I just set it to make a small prompt when it tries to connect to the proxy and fails? Like Firefox, Chrome and every app I have installed with Windows 7? I get this small dialog box that asks for a username and password when it can't access the internet. The Ubuntu Server doesn't need constant internet connection, specially since it's only online for tests over LAN.

  Read the article

• How to install a Lexmark z600 series printer?

  - by Uri Herrera

  It has been a headache trying to install this printer. All the tutorials I found are for older versions of Ubuntu, and none of them work. How can I install this printer? Edit: HOWTO: Install PITA Lexmark Z600 Z615 and Dell Photo Printer 720 Setup Lexmark Z600 and X series printer on Ubuntu (i tried this one, only that it was translated to spanish, but it was the same instructions) HOWTO: Lexmark Printers I always get an error when extracting the converted tars with all of the tuts, invalid argument or the file doesn't exist. Looks like, i was missing some ia32 libs .. and that caused the errors with the tar files, anyways i still can't print now i get this, cups-insecure-filter How to install Lezmark Z600 series printer Here, the OP offers 2 debs, i installed them on a 32 bit Ubuntu install, now the printer gets recognized but still can't print, 'cause i'm missing a filter, "rastertoz600".

  Read the article

• Internet stopped working after aircrack install (can still connect to my router). Suggestions?

  - by Dan

  I'm sure I did something dumb during the install for aircrack, but I have no clue what. Like I said, I can connect to my router (not trying to crack, simply logging into it), I just can't get internet access. To make this more interesting, the machine is dual booted and when I log into Windows I have zero issues. I feel like some driver may have been messed up in the process, but I'm not sure if that's a reasonable assumption or how exactly to check that. Also, can't revert to backup as there are none. Suggestions on how to trouble-shoot would be appreciated. EDIT: Hard-wiring to the wall I can get internet access on the Ubuntu side... PS- I know this is a stretch as far as fitting the Ubuntu section, but no other stackoverflow sites seemed to fit better.

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >