Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 367/1213 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

  • Recovering data from /

    - by Abhijit Gavas
    I accidentally installed Ubuntu to one of my data drives from Windows. The drive was a NTFS drive and contained about 80 GB of important data. The size of the drive is 110 GB. Its new file system is ext4. In an attempt to recover the data, I downloaded foremost and tried the following commands: foremost -i / -o /media/281C8DB01C8D7998/Recovery/ -T -v foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v (sda7 is the drive in question.) It appears that with either command, foremost gets stuck reading some file. Here is the console output: abhi@abi-PC:/dev$ foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Foremost version 1.5.7 by Jesse Kornblum, Kris Kendall, and Nick Mikus Audit File Foremost started at Fri Sep 28 20:58:00 2012 Invocation: foremost -i /dev/sda7 -o /media/281C8DB01C8D7998/Recovery/ -T -v Output directory: /media/281C8DB01C8D7998/Recovery_Fri_Sep_28_20_58_00_2012 Configuration file: /etc/foremost.conf Processing: stdin |------------------------------------------------------------------ File: stdin Start: Fri Sep 28 20:58:00 2012 Length: Unknown Num Name (bs=512) Size File Offset Comment Killed As you can see I have to kill it from system monitor. This approach does not seem to be working. What else could I try to recover the files? Please help. The files are very important and I will be devastated if I cannot recover them.

    Read the article

  • I cant install ubuntu 12.04 on my dell latitude d510

    - by Jose de Jesus
    I download the iso from Ubuntu.com and burned into a CD-R with the program in the page. The disc work right in my desktop but when i run it in my laptop appears another menu with the options prove ubuntu, install ubuntu, check the memory, check for errors, and run windows.When i try the option install appears in the screen "Ubuntu" in the center and littles points down (loading) and after 5 minutes the computer freeze. What can i do?

    Read the article

  • High resolution CLI?

    - by Mike Williamson
    I want the resolution of my console to match my screen resolution(1440x900). 1024x768 works fine but for some reason when I put 1440x900 when I switch to ttyX the command prompt is almost right off the bottom of the screen! The Ubuntu splash screen goes off the edge of the screen during boot as well. Here is my /etc/default/grub 4 GRUB_DEFAULT=0 5 GRUB_HIDDEN_TIMEOUT=0 6 GRUB_HIDDEN_TIMEOUT_QUIET=true 7 GRUB_TIMEOUT=10 8 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` 9 GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" 10 GRUB_CMDLINE_LINUX="" 11 GRUB_GFXMODE=1440x900 12 GRUB_GFXPAYLOAD_LINUX=keep How do I get my CLI resolution to be 1440x900?

    Read the article

  • Sound in Ubuntu 12.10 on Chromebook

    - by Paul Mennega
    I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

    Read the article

  • Partitions are gone after installing ubuntu 13.10

    - by Chaitanya
    I have installed Ubuntu 13.10 today. I selected it to overwrite my windows 7 operating system. However, after booting up Ubuntu I saw that my partitions are gone and all the space is showing up us in one partition. Why is this happening? Have I done something wrong while choosing to overwrite windows 7? I understand that while overwriting windows 7 it will format my C: drive there, but why my other partitions are gone? Is there any way that I can get my data back?

    Read the article

  • Change order of monitors without changing fullscreen"size"

    - by user171489
    I have a dual monitor setup. My primary monitor is a 22" with a max resolution of 1680x1050 and my secondary is a 19" with a max resolution of 1280x1024. The secondary is standing on the left side of the primary one. My problem now is, that, if I change the order of the monitors in my nvidia x-server settings, so that my secondary is the first one (or the one on the left), the fullscreen mode in flash in scaled up to my secondary monitor, even if it´s displayed on my primary one. Meaning that i get a 1280x1024 "fullscreen" window on my bigger primary monitor. When I configure my x-server settings so the secondary monitor is the one on the right, I don´t have this problem. The only thing then is, that I have to scroll out on the right to get to my monitor on the right. I can´t move my secondary monitor on the right side of my primary due to lack of space and my belief that there must be a software solution. ;) Thanks in advance.

    Read the article

  • Auto-run script when iPad plugged in

    - by oldmankit
    The way that Ubuntu handles documents on the iPad is awesome (without any configuration required). It beats windows, even after you install iTunes. I want to have the documents in certain iPad apps automatically synced into my Dropbox directory whenever the iPad is connected by USB. The syncing is easy; getting the script to run is not. I have already read the information in various (very out-of-date) tutorials. The best I could find was here: http://askubuntu.com/a/25091/16157 I used lsusb, with the following results: Bus 002 Device 012: ID 05ac:12a2 Apple, Inc. (Please note that when an iPad is connected, Ubuntu seems to mount it to two different mount points: one for "Documents" and one for the whole iPad filesystem. They are both mounted in ~/.gvfs) I have created the following file /etc/udev/rules.d/96-ipad_sync.rules ACTION=="add", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="12a2", RUN+="/home/kit/bin/jobdone2" I want it to run a test script (which sleeps for five seconds then plays an mp3 file. The test script works, and I have typed the location correctly). So far, when I plug the iPad in, nothing happens. Yes, I waited five seconds. This is the output I get from typing udevadm monitor –env KERNEL[29348.114010] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4 (usb) KERNEL[29348.114844] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) KERNEL[29348.129118] remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) KERNEL[29348.130699] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.0 (usb) KERNEL[29348.130845] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.1 (usb) KERNEL[29348.130909] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.2 (usb) UDEV [29348.163861] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4 (usb) UDEV [29348.170390] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) UDEV [29348.171521] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.1 (usb) UDEV [29348.172230] remove /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0 (usb) UDEV [29348.172890] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.2 (usb) UDEV [29348.175645] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:4.0 (usb)

    Read the article

  • Touchpad stopped working on an Acer AspireOne D255E

    - by Gustavo
    I have a less than a year old Acer AspireOne D255E with a fresh install of Ubuntu 11.10. Everything has been working fine. Great OS and great netbook. But today the touchpad stopped working. It had been working fine. I closed the netbook and when I opened it again, a couple of hours later, I could not move the pointer with the touchpad. I can not get the pointer to move. I cleaned the touchpad surface well, just in case. Everything else is working fine. All the software updates are up-to-date. I have rebooted several times with no solution. I have attached an USB mouse and the pointer works well. What can I do to troubleshoot the problem? I have gone to the System Settings, touchpad section, and there is not much that I can do there. I would like to determine first if it is a hardware or software issue and then how to resolve it. Is there a way that I can reinstall the touchpad drivers. just in case it is a software problem? I have been using Ubuntu for nearly a year now and am very happy with it. Are there any wise Ubuntu gurus out there who can help me? Thank you for reading this note.

    Read the article

  • apt-get issue after upgrading to 12.04

    - by user83906
    I have recently upgraded my cluster from 11.10 to 12.04. After the upgrade, I am having trouble running apt-get on the cluster nodes. I can ssh between the nodes (client-to-client; client-to-head; client-to-external etc.). However, sudo apt-get update produces the following errors: Ign http://us.archive.ubuntu.com precise InRelease Ign http://security.ubuntu.com precise-security InRelease Ign http://www.openfoam.org maverick InRelease Ign http://us.archive.ubuntu.com precise-updates InRelease Err http://security.ubuntu.com precise-security Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname) Err http://www.openfoam.org maverick Release.gpg Something wicked happened resolving 'www.openfoam.org:http' (-5 - No address associated with hostname) Ign http://us.archive.ubuntu.com precise-backports InRelease Ign http://www.openfoam.org maverick Release Ign http://security.ubuntu.com precise-security Release Err http://us.archive.ubuntu.com precise Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/main Sources/DiffIndex Err http://us.archive.ubuntu.com precise-updates Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/restricted Sources/DiffIndex 15% [Connecting to us.archive.ubuntu.com] [Connecting to security.ubuntu.com] [Connecting to www.openfoam.org] On the headnode, I have in /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.1/24 On the client nodes, I have /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.101 netmask 255.255.255.0 gateway 192.168.0.1 Please advise.

    Read the article

  • Repairing or recreating a bootloader on a multi-booting EFI GPT system

    - by Emre
    Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

    Read the article

  • Can I install Natty alongside Maverick and retain my encrypted /home partition?

    - by Jon
    This is my partitioning scheme: 10GB partition empty -- will be installing Natty here 10GB partition containing Maverick 2GB swap partition 300GB encrypted /home partition I've had few problems in the past with having two ubuntu installs on two separate partitions, giving /home it's own partition, but I'm a little concerned since I'm now using an encrypted /home partition. Install won't try to wipe my /home if I click " encrypt home directory," will it?

    Read the article

  • Run Blustacks or Android to play clash of clans on ubuntu 13.4+

    - by Joe Hanus
    I am trying to get rid of the need to dual boot Ubuntu and windows and one thing I can do with windows I can not do with Linux is to run Bluestacks to play android games my favourite one ow is clash of clans. I have tried different VM's to run android emulators and virtual box but nothing works for clash of clans I can download the game to the VM from Google Play Store but it fails to open If Ubuntu can fix this by making a way to successfully install Bluestacks on Ubuntu or Android with Virtual box with out loading errors of all apps/games it would help the Linux community to become less dependant of Windows. Thanks in advance! go Ubuntu!

    Read the article

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Upgrading 10.04LTS -> 10.10 using custom sources

    - by Boatzart
    I'm trying to upgrade to 10.10 from 10.04 LTS using a custom sources.list file that points to an unofficial mirror*. The mirror does have maverick, but I get the following output when upgrading: boatzart@somecomputer: > sudo do-release-upgrade Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'maverick.tar.gz' authenticate 'maverick.tar.gz' against 'maverick.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Updating repository information WARNING: Failed to read mirror file No valid mirror found While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'lucid' to 'maverick' entries. If you select 'No' the upgrade will cancel. Continue [yN] y WARNING: Failed to read mirror file 96% [Working] Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Here is the relevant section from /var/log/dist-upgrade/main.log: 2010-11-18 14:05:52,117 DEBUG The package 'update-manager-kde' is marked for removal but it's in the removal blacklist 2010-11-18 14:05:52,136 ERROR Dist-upgrade failed: 'The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.' 2010-11-18 14:05:52,136 DEBUG abort called *I'm located inside of USC, and for some crazy reason any sustained downloads to anywhere outside of the University are throttled down to 5kbps inside of my lab. Because of this I need to use the following sources.list: deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-updates main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-backports main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-security main restricted universe multiverse I've tried adding four more entries to the sources.list with s/lucid/maverick/ but that didn't help. Does anyone know how to fix this? Thanks!

    Read the article

  • Connman not connecting to internet

    - by sagarchalise
    I wanted to try connman as I heard it will be replacing network manager. I kinda liked its looks and feel but the problem is I donot get connected to internet. I am using ADSL and it connects to my adsl router but doesnot ping google or any other sites. I tried to change the default gateway as well as use static ips but to no avail. It displays I am wired but doesnot open any sites or ping to any external sites except for 198.168.1.1 which is my router ip. Can anyone help ? Basically it is doing alright with network-manager as well as wicd

    Read the article

  • What is the application that displays notifications in Lubuntu 12.04 and how to remove it?

    - by cipricus
    I get all the time notifications in the upper right corner and as a tray icon for all kind of actions, especially downloads. What app is that in Lubuntu? (it is not notify-isd) Is it possible to set what notifications to see? If not, how to remove this completely? Update edit: Removing notification-demon (that being it seems the culprit, as an answer suggests) involves removing some important applications: Lubuntu-desktop is a metapackage I guess. But what about removing deluge and update-notifier? Can I add these back without getting back the notifier?? I do not want in any case to remove these two.

    Read the article

  • Cannot install ia32-libs on a 64 bit Ubuntu installation

    - by Swarnendu Biswas
    I am using a 64-bit installation of Oneiric. I need to install the ia32-libs package to get some applications (evince, adobe reader) to work. For example, adobe reader is giving the following error: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory. However, I am not able to install it since it is showing a dependency on ia32-libs-multiarch, which in turn is showing a dependency on gstreamer0.10-plugins-good:i386. This in turn depends on few other packages. How can I install these packages safely and still meet all the dependencies.

    Read the article

  • VertTwoFingerScroll and VertEdgeScroll not settable via xorg.conf

    - by James Wood
    I've just upgraded to Saucy (this was working in Raring). I've tried rebooting. Here's /etc/X11/xorg.conf: Section "InputClass" Identifier "Touchpad" Driver "synaptics" MatchIsTouchpad "on" Option "PressureMotionMinZ" "60" Option "MaxTapMove" "4" Option "PalmDetect" "1" Option "VertTwoFingerScroll" "1" Option "VertEdgeScroll" "0" EndSection And here's the output from synclient: LeftEdge = 100 RightEdge = 2408 TopEdge = 71 BottomEdge = 1249 FingerLow = 1 FingerHigh = 1 MaxTapTime = 180 MaxTapMove = 4 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 EmulateMidButtonTime = 75 EmulateTwoFingerMinZ = 282 EmulateTwoFingerMinW = 7 VertScrollDelta = 56 HorizScrollDelta = 56 VertEdgeScroll = 1 HorizEdgeScroll = 1 CornerCoasting = 0 VertTwoFingerScroll = 0 HorizTwoFingerScroll = 0 MinSpeed = 1 MaxSpeed = 1.75 AccelFactor = 0.0705716 TouchpadOff = 2 LockedDrags = 0 LockedDragTimeout = 5000 RTCornerButton = 2 RBCornerButton = 3 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 3 TapButton3 = 0 ClickFinger1 = 1 ClickFinger2 = 1 ClickFinger3 = 0 CircularScrolling = 0 CircScrollDelta = 0.1 CircScrollTrigger = 0 PalmDetect = 1 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 20 CoastingFriction = 50 PressureMotionMinZ = 60 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 ResolutionDetect = 1 GrabEventDevice = 1 TapAndDragGesture = 1 AreaLeftEdge = 0 AreaRightEdge = 0 AreaTopEdge = 0 AreaBottomEdge = 0 HorizHysteresis = 14 VertHysteresis = 14 ClickPad = 0 Notice that PressureMotionMinZ, MaxTapMove and PalmDetect are as specified in xorg.conf, but VertEdgeScroll and VertTwoFingerScroll aren't. I can set them temporarily via synclient VertEdgeScroll=0 and synclient VertTwoFingerScroll=1, but these changes are lost when I reboot. What's the best way of fixing this?

    Read the article

  • Why does Ubuntu, sometimes, fails to load?

    - by mohit
    I recently installed Ubuntu 12.04 LTS on my SONY VAIO VPCEH (with Windows 7 Home Basic previously installed). Sometimes when I boot in Ubuntu, following things happen: Ubuntu loading screen seems to freeze. Esc key doesn't show installation progress. Hard-drive led doesn't glow. caps lock and scroll lock keys keep blinking. I've to manually restart my laptop. On restart, Ubuntu loads normally. What can I do to recover from present situation?

    Read the article

  • 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

    - by Navraj
    Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

    Read the article

  • Loss of privileges when enabeling auto log-in to encrypted home folder

    - by reav
    I use Ubuntu 11.10 with Gnome Shell and have an encrypted home folder. I enabled auto log-in through the system settings/users-admin menu, as I expected it didn't work (because of my encrypted home folder/user I suspect). But now I don't have privileges to mount my eksternal hard-drive, and I can no longer disable the auto log-in function, since the un-lock button in users-admin menu is grayed out. It seems like my users privileges has been degraded. Does any one have an solution to how I disable auto log-in and regain my privileges?

    Read the article

  • What is the root of my application?

    - by railguage48
    Can someone help me understand what is the root of my application? I would like to use vim and create a one line procfile in the root of my application. Then I can test the procfile using a gem called foreman with the following command in my terminal: foreman start I have tried sudo vim /procfile and created the file and saved it in what I thought to be the root. Then I typed: foreman start and the response is that Procfile does not exist. Any help would be most appreciated.

    Read the article

  • Keyboard-shortcut key-press-detection sensitivity settings

    - by Juve
    last week I switched from Ubuntu 10.10 to 12.04 and after setting up my keyboard shortcuts, e.g., CTRL+ALT+E for my favorite editor and CTRL+ALT+X for the terminal, I noticed that the behavior when pressing the appropriate keys changed somehow. I know this is very subjective and I am not 100% percent sure if I am suddenly just too lazy when using my keyboard, but here is what I noticed: To run your shortcuts, you usually press the modifiers first and in addition press the alphanum key. Now, if I hold the modifiers down very consciously and press the alphanum key afterwards everything works fine. However, I noticed that I may often release the modifiers a bit too early. In Ubuntu 10.10 (metacity/compiz) my keyboard shortcuts would still execute and my tools would pop up. This does not work anymore in 12.04. Nevertheless, I still believe the old behavior to be more intuitive and would like to have it back. I a nutshell: Is there a parameter to control the shortcut-key-press detection behavior? I already searched the ubuntu keyboard options and searched for "keyboard" in gconf-editor but could not find any hints so far.

    Read the article

  • 12.04 BCM4312 and aireplay-ng/airodump-ng

    - by Haxornator
    First off, I've read through all of the posts regarding BCM4312 on the forums but haven't been able to get any help. Basically I have a Dell Inspiron 1564 which I've installed 12.04 on and for the most part everything works fine but now that I'm trying to use more in depth utilities such as aireplay and airodump I'm coming across what I believe to be a driver problem thats not allowing compatibility for these programs. Does anyone out there have any suggestions how to resolve this? This is the error I receive: root@Haxornator:~/aircrack/aircrack-ng-1.1# airodump-ng eth2 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth2 <#' Sysfs injection support was not found either.

    Read the article

  • WUBI installation on Lenovo u310

    - by Tom
    I recently installed 12.04 through the WUBI on a Lenovo u310. The installation went fine, but when I rebooted into Windows 7, and then rebooted into Ubuntu, it immediately went to a command line 'grub' prompt. I was able to reboot from there successfully into 12.04 (once) but then on another occasion could do nothing to reboot into Ubuntu, so had to reinstall. The reason I used the WUBI route was that there are troubles in 12.04 recognizing the hard drives on Lenovo u310 on direct install from memory stick. This has been a bit frustrating, and I was surprised by the difficulties on the Lenovo u310.

    Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >