Search Results

Search found 25551 results on 1023 pages for 'linux validated rpm oracl'.

Page 364/1023 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• LXC container can only access host via bridge

  - by vitaut

  I have an LXC container with i686 Ubuntu 12.04 running on a x86_64 Ubuntu 12.04 host. I've set up a bridge using instructions here. However the ping from the container only goes through to the host and not to other machines on the local network. Similarly only the host and not the other machines see the container OS. The host's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_fd 0 bridge_maxwait 0 The container's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp And here's the relevant part of the container's config: lxc.network.type=veth lxc.network.link=br0 lxc.network.flags=up Any ideas what I'm doing wrong? Additional info: The output of iptables-save on host: $ sudo iptables-save # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *filter :INPUT ACCEPT [6854:721708] :FORWARD ACCEPT [4067:538895] :OUTPUT ACCEPT [4967:522405] COMMIT # Completed on Sat Oct 26 06:06:48 2013 # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *nat :PREROUTING ACCEPT [82235:21547307] :INPUT ACCEPT [16:1070] :OUTPUT ACCEPT [9386:583359] :POSTROUTING ACCEPT [14693:1291952] -A POSTROUTING -s 10.0.3.0/24 ! -d 10.0.3.0/24 -j MASQUERADE COMMIT # Completed on Sat Oct 26 06:06:48 2013 The output of brctl show on host: $ brctl show bridge name bridge id STP enabled interfaces br0 8000.080027409684 no eth0 vethBkwWyV The output of ifconfig br0 on host: $ ifconfig br0 br0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:232863 errors:0 dropped:0 overruns:0 frame:0 TX packets:59518 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34437354 (34.4 MB) TX bytes:198492871 (198.4 MB) The output of ifconfig eth0 on host: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:299419 errors:0 dropped:0 overruns:0 frame:0 TX packets:203569 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:59077446 (59.0 MB) TX bytes:372056540 (372.0 MB) The output of ifconfig eth0 on container: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:16:3e:74:08:2b inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe74:82b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:81 errors:0 dropped:0 overruns:0 frame:0 TX packets:113 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8506 (8.5 KB) TX bytes:9021 (9.0 KB)

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• rc.local is not executed on bootup ubuntu

  - by Alexander

  Im on Ubuntu 10.04. I want to execute script on system boot. I added it to rc.local. If I execute rc.local manually it works fine. If I boot system in recovery mode(2nd string in boot menu) it also works fine. But if I boot normally it is not executed. However i added sleep 20 to my script and there is a pause at the end of boot process, but nothing more is executed. Thanks I think, it soesnt depend on contents of the script but anyway #!/bin/sh -e sleep 20 sudo service ssh start su -c 'service pgsql start' postgres sudo svnserve -d su -c 'hamachi start' root su -c 'hamachi login' root exit 0

  Read the article

• why dstat failed with --tcp option?

  - by hugemeow

  why --tcp option failed? should i install some package? if yes, which package i should install? this question is not the same as http://stackoverflow.com/questions/10475991/tcp-sockets-double-messages dstat --tcp Module tcp has problems. (Cannot open file /proc/net/tcp6.) None of the stats you selected are available. what is the problem with module tcp, how to find the problem? what i should do in order to fix this issue?

  Read the article

• "Sticky button" configuration under X11/Ubuntu?

  - by John Whitley

  Is there a configuration or app that will enable Sticky-keys like functionality for a pointer button under X11? (On Ubuntu 9.10, FWIW.) To be clear, I'd like a single tap (down/up events) to be treated as a down event, and a following tap to be treated as an up event. Context: I have a trackball with a fourth button that I've mapped to act as horizontal/vertical scroll. This works great. It'd be even better if I didn't have to hold the button down when scrolling.

  Read the article

• How to force Debian to boot new Kernel?

  - by ThE_-_BliZZarD

  I'm running Debian 6, Debian GNU/Linux, with Linux 2.6.32-5-amd64 under Grub2 ( 1.98+20100804-14+squeeze1) on a remote system (no possibility to view the pre-boot messages). I compiled and installed a new kernel, but I can not get it to boot. What I have done: Installed the packages via: dpkg -i linux-headers-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb linux-image-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb This updated the Grub configuration. My /boot/grub/grub.cfg now contains: menuentry 'Debian GNU/Linux, with Linux 3.5.3.20120914-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 3.5.3.20120914-amd64 ...' linux /vmlinuz-3.5.3.20120914-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-3.5.3.20120914-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } I used grub-set-default "Debian GNU/Linux, with Linux 2.6.32-5-amd64" to set the old kernel as default and then grub-reboot "Debian GNU/Linux, with Linux 3.5.3.20120914-amd64" to boot into the new kernel once. After update-grub I rebooted the system, but everytime it comes back up with the old kernel (2.6). I tried setting the new one as default (grub-set-default 0, update-grub, reboot) but, still the old one. The Syslogs contain NO hint whatsoever about trying to boot the new kernel - only the old one. Would there be any hints regarding problems with a kernel? Is there a way to enable debug-logging in grub? What am I doing wrong? How can I force the system to boot the new kernel? Edit: Hardware of remote machine. CPU cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 5 model name : AMD Athlon(tm) II X4 605e Processor stepping : 3 cpu MHz : 2294.898 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt bogomips : 4589.77 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate (copied only the first, 3 more follow) The server is a Fujitsu PRIMERGY MX130 S1.

  Read the article

• How to automaticaly mount luks-partition only when disk is plugged in

  - by Frederick Roth

  I have the following scenario: I want to automatically backup some data from my Laptop(Fedora Core 17) to a external encrypted(luks) hard disk. The disk can be opened by a key file, which lies on the also encrypted root partition of my laptop. The hard disk is attached to my docking station and therefore only "present" when I am at home (which is approximately 1/2 of the time the Laptop runs) I have everything set up the way I want it with one exception. I don't get a decent way to mount the hard disk automatically at boot if and only if it is present. If I add it to crypttab and fstab without noauto it tries to mount it at boot and takes a lot(!) of time and error messages when it is not present. If I add noauto, well it does not mount automatically ;) Is there a way to configure luks/crypttab to do the following: check whether the disk is present if yes: decrypt/mount if no: just don't

  Read the article

• "Must have" Ubuntu packages

  - by blntechie

  Inspired by this question What are the must have packages for Ubuntu? List one in each answer. Scope is for Ubuntu only. Debian can have an another thread.

  Read the article

• Easy shorewall question : allow ips to DNAT

  - by llazzaro

  Hello, At my home network I had a transparent proxy. This is the rule that forward all 80 traffic to my squid3.1 server at DMZ DNAT loc:!10.0.0.126 dmz:172.16.0.198:3128 tcp 80 - !172.16.0.198 Ok, I need to add more ips to avoid transparent proxy. I tried loc:!10.0.0.134,!10.0.0.126...but didnt work (also similars like [ip0,ip1]. I tried to google the answer cant find it (sorry no matches, not searching the right keywords) also I tried to read the docs, but they are really long (and indexes dont help me). Thanks!

  Read the article

• Prevent udev / uevents looking up DVD at boot time

  - by Sampo

  Problem: Boot time delay caused by udev. Early after initscripts starts there is message saying waiting for uevents to be processed and causing delay on boot, it seems that udev is looking if there is disc in dvd tray. After udev has found disc, boot process continues normally. Main question: How to prevent udev dvd lookup at boot time? Maybe there is some way to skip some udev related stuff and let boot process continue and then later instruct udev to do stuff that may cause some delay (delay in uevents, but not in main boot process, is acceptable after udev is initially loaded).

  Read the article

• How do you find the parent process of a zombie process?

  - by Jack

  How do you find the parent process of zombie processes? When the child process is something where the parent is not entirely obvious... Is there some way to list processes in tree format or something?

  Read the article

• Ubuntu and mysql server. Something isnt allowing me to connect

  - by acidzombie24

  I have a question about mysql settings http://serverfault.com/questions/94054/remote-connections-and-mysql-on-ubuntu/94088#94088 now i want to figure out why i cannot connect. I made sure bind-address was commented out. I can ping the server within the VM but i cannot ping it from within the VM using mysqladmin --protocol=tcp --host=self_ip ping. I also followed along and check if my ports were open and they look like they are. I setup samba on that VM and can access that with no problem as well. It looks like ubuntu does not have a firewall either (i figured this out before) so i am stumped why the server isnt allowing my connection. Apparently the config file works on another person side http://www.pastie.org/742545 I am using Ubuntu 6.06 LTS just because of 'support' reasons. So hopefully this will be 'easy'?

  Read the article

• copy boot-able partition

  - by Dima

  I have an disk image with 3 partitions: first partition (hd0,0) is boot-able with GRUB1 with the following configuration GRUB file: default=0 timeout=5 title Bank A root (hd0,1) chainloader +1 title Bank B root (hd0,2) chainloader +1 The partitions (hd0,1) and (hd0,2) are also boot-able. I'm trying to clone partition (hd0,1) to (hd0,2) by creating device map using kpartx and copying whole partition using dd command. The problem is: after partition cloning, the cloned partition did not boot (but all files are OK). What the wrong? I need both partitions to bee identical (I'm using them for fail-over purposes into embedded device)

  Read the article

• How to do a hexdump of first track of HDD?

  - by Daniel Gratz

  How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

  Read the article

• Remove server hangs, gets stuck. How to debug?

  - by bibstha

  I have an vps running on VmWare ESX with Ubuntu 8.04 LTS. It has been running smoothly for the past 3 months, however recently we've notices two strange bugs. a. The server hangs, today was second time. The nature of the hang is very strange. I can ping to the server server, it sends back response fine. However all other services like sshd, apache, mysql etc do not respond at all. When working, telnet servername 22 Escape character is '^]'. SSH-2.0-OpenSSH_5.X Debian-5ubuntu1 And other web services would run fine. When its hung, I can make tcp connections to 22 as well as 80 but receive no response at all. telnet servername 22 Escape character is '^]'. How can I debug this problem? Is there any daemons I can run that will periodically log status? Please tell me as to how to proceed with it. b. The another strange problem is that, of lately I am unable to transfer files larger than around 100KB, smaller files of around 1-2 KB works file. scp anotherserver:filename . or wget http://www.example.com/file would get stuck. There is still around 6GB of space remaining, so I don't think that is an issue. Any pointers where I should look into?

  Read the article

• Conflicting answers from du with different units

  - by dpitch40

  My question is quite simple. I get this output when checking the total amount of space I'm using on my Walkman. david@Milton:/media$ du -b --max-depth=0 WALKMAN/ 14823290693 WALKMAN/ david@Milton:/media$ du -k --max-depth=0 WALKMAN/ 14523776 WALKMAN/ Last I checked, 14,523,776 KB * 1024 = 14,872,646,624 B, not 14,823,290,693. Dividing the two, their "K" unit seems to be equal to about 1020.62 rather than 1024 as advertised. This is causing some errors in the program I wrote to sync my Walkman, so it fills up faster than it claims to. Can anyone explain this discrepency?

  Read the article

• How long does a blocked connection from Iptables last? Is there a way to set the timeout?

  - by Josh

  iptables -A INPUT -m state --state NEW -m recent --set # If we receive more than 10 connections in 10 seconds block our friend. iptables -A INPUT -m state --state NEW -m recent --update --seconds 5 --hitcount 15 -j Log-N-Drop I have these two relevant rules from iptables. if more than 15 connections are made in 5 seconds it logs the attempt and blocks it. How long does iptables maintain the counter? Does it refresh if connections are attempted again?

  Read the article

• Are these mySQL user settings vulnerable?

  - by Kavon Farvardin

  I'm using myphpadmin to manage the databases and I'm new to SQL in general. Am I suppose to keep an open anonymous user on localhost so things like drupal can access mySQL? It seems like having a non-passworded root on my server's hostname is retarded but I don't know what I'm doing with this in general. The user who's name starts with a b is the one I use to login and do things like make a database.

  Read the article

• Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443

  - by Steve

  I have a new VPN connection (using openvpn) to allow me to route around some ISP restrictions. Whilst it is working fine, it is taking all the traffic over the vpn. This is causing me issues for downloading (my internet connection is a lot faster than the vpn allows), and for remote access. I run an ssh server, and have a daemon running that allows me to schdule downloads via my phone. I have my existing ethernet connection on eth0, and the new VPN connection on tun0. I believe I need to setup the default route to use my existing eth0 connection on the 192.168.0.0/24 network, and set the default gateway to 192.168.0.1 (my knowledge is shaky as I haven't done this for a number of years). If that is correct, then I'm not exactly sure how to do it!. My current routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt 0.0.0.0 10.51.0.169 0.0.0.0 UG 0 0 0 tun0 0 0 0 10.51.0.1 10.51.0.169 255.255.255.255 UGH 0 0 0 tun0 0 0 0 10.51.0.169 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 0 0 0 85.25.147.49 192.168.0.1 255.255.255.255 UGH 0 0 0 eth0 0 0 0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0 0 0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 0 0 0 After fixing the routing, I believe I need to use iptables to configure prerouting or masquerading to force everything for destination port 80 or 443 over tun0. Again, I'm not exactly sure how to do this! Everything I've found on the internet is trying to do something far more complicated, and trying to sort the wood from the trees is proving difficult. Any help would be much appreciated. UPDATE So far, from the various sources, I've cobbled together the following: #!/bin/sh DEV1=eth0 IP1=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 192.` GW1=192.168.0.1 TABLE1=internet TABLE2=vpn DEV2=tun0 IP2=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` GW2=`route -n | grep 'UG[ \t]' | awk '{print $2}'` ip route flush table $TABLE1 ip route flush table $TABLE2 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table $TABLE1 $ROUTE ip route add table $TABLE2 $ROUTE done ip route add table $TABLE1 $GW1 dev $DEV1 src $IP1 ip route add table $TABLE2 $GW2 dev $DEV2 src $IP2 ip route add table $TABLE1 default via $GW1 ip route add table $TABLE2 default via $GW2 echo "1" > /proc/sys/net/ipv4/ip_forward echo "1" > /proc/sys/net/ipv4/ip_dynaddr ip rule add from $IP1 lookup $TABLE1 ip rule add from $IP2 lookup $TABLE2 ip rule add fwmark 1 lookup $TABLE1 ip rule add fwmark 2 lookup $TABLE2 iptables -t nat -A POSTROUTING -o $DEV1 -j SNAT --to-source $IP1 iptables -t nat -A POSTROUTING -o $DEV2 -j SNAT --to-source $IP2 iptables -t nat -A PREROUTING -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -t nat -A PREROUTING -i $DEV1 -m state --state NEW -j CONNMARK --set-mark 1 iptables -t nat -A PREROUTING -i $DEV2 -m state --state NEW -j CONNMARK --set-mark 2 iptables -t nat -A PREROUTING -m connmark --mark 1 -j MARK --set-mark 1 iptables -t nat -A PREROUTING -m connmark --mark 2 -j MARK --set-mark 2 iptables -t nat -A PREROUTING -m state --state NEW -m connmark ! --mark 0 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 80 -j CONNMARK --set-mark 2 iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 443 -j CONNMARK --set-mark 2 route del default route add default gw 192.168.0.1 eth0 Now this seems to be working. Except it isn't! Connections to the blocked websites are going through, connections not on ports 80 and 443 are using the non-VPN connection. However port 80 and 443 connections that aren't to the blocked websites are using the non-VPN connection too! As the general goal has been reached, I'm relatively happy, but it would be nice to know why it isn't working exactly right. Any ideas? For reference, I now have 3 routing tables, main, internet, and vpn. The listing of them is as follows... Main: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 Internet: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 192.168.0.1 dev eth0 scope link src 192.168.0.73 VPN: default via 10.38.0.205 dev tun0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1

  Read the article

• How do I configure a secondary gateway in RHEL5?

  - by Brett Ryan

  Greetings, we have been experiencing a random timeout issue with VPN users connecting to one of our servers which is causing a problem. My network administrator has instructed me to configure a secondary gateway to include the VPN connection. My current connection resides as follows, 10.1.9.1 is the internal gateway to the internet, I'd like to add 10.1.1.20 as the VPN gateway. # Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet DEVICE=eth0 BOOTPROTO=none BROADCAST=10.1.255.255 IPADDR=10.1.1.22 IPV6_AUTOCONF=yes NETMASK=255.255.0.0 NETWORK=10.1.0.0 ONBOOT=yes GATEWAY=10.1.9.1 TYPE=Ethernet USERCTL=no IPV6INIT=no PEERDNS=yes

  Read the article

• How to secure Firefox traffic (+DNS) through SOCKS proxy under Ubuntu 10.04?

  - by Maarx

  I'm using Ubuntu 10.04, and starting a SOCKS proxy with 'ssh -D', and setting Ubuntu to use it with "System - Preferences - Network Proxy". Firefox uses the proxy, and the proxy's IP appears when I visit a site like http://www.whatismyip.com/. My question is, is Firefox resolving DNS requests through this proxy? Is my web-browsing truly secure? (That is, until I exit the other end of the proxy. I know it's insecure after that.) (And I've verified the keys, I'm not being man-in-the-middled) (And--screw it. You know what I mean. Is it resolving DNS requests through the proxy?) I don't know how I would go about verifying such a thing for myself. Using additional hardware such as another debugging proxy is not an option. If Firefox isn't resolving my DNS requests through the SOCKS proxy, how do I go about fixing it?

  Read the article

• configure server and create website without any control panel

  - by Emad Ahmed

  i am trying to configure my new server without cpanel i've installed php/mysql/apache And it's now working fine if you visit the server ip http://46.166.129.101/ you'll see the welcome page i've configured my dns too my nameserverips file [root@server]# cat /etc/nameserverips 46.166.129.101=ns1.isellsoftwares.com 46.166.129.101=ns2.isellsoftwares.com if you visit this link http://ns1.isellsoftwares.com you'll see the welcome page too!! but if you visit isellsoftwares.com you'll see ( 'Firefox can't find the server at www.isellsoftwares.com.' ) Now my question is: How to create an account for this domain on the server?? i've tryied to add virtualHost tag in apache <VirtualHost *:80> ServerAdmin [email protected] ServerAlias www.isellsoftwares.com DocumentRoot /var/www/html/issoft ServerName isellsoftwares.com ErrorLog logs/dummy-host.example.com-error_log CustomLog logs/dummy-host.example.com-access_log common </VirtualHost> it still not working ... i've added named file for this domain (( isellsoftwares.com.db )) ; Zone file for isellsoftwares.com $TTL 14400 isellsoftwares.com. 86400 IN SOA ns1.isellsoftwares.com. elsolgan.yahoo.com. ( 2012031500 ;Serial Number 86400 ;refresh 7200 ;retry 3600000 ;expire 86400 ;minimum ) isellsoftwares.com. 86400 IN NS ns1.isellsoftwares.com. isellsoftwares.com. 86400 IN NS ns2.isellsoftwares.com. isellsoftwares.com. 14400 IN A 46.166.129.101 localhost 14400 IN A 127.0.0.1 isellsoftwares.com. 14400 IN MX 0 isellsoftwares.com. mail 14400 IN A 46.166.129.101 www 14400 IN CNAME isellsoftwares.com. ftp 14400 IN A 46.166.129.101 cpanel 14400 IN A 46.166.129.101 whm 14400 IN A 46.166.129.101 webmail 14400 IN A 46.166.129.101 webdisk 14400 IN A 46.166.129.101 ns1 14400 IN A 46.166.129.101 ns2 14400 IN A 46.166.129.101 but it still not working !!!!! So, what else i should do??

  Read the article

• EC2 EBS AMI Instance stopping/restarting doesn't start services

  - by tgm

  I've recently been moving our instances to EBS instances (CentOS) and still have a bit of confusion on what's happening when I "stop" and instance. I have some of my services with runlevels 345 on but when I start a stopped instance the services don't start. What's actually happening when I issue a stop command to the instance, and how do I get my services to start automatically when I start the instance up again?

  Read the article

• Graphite Running using daemon tools getting defunct

  - by pradeepchhetri

  I am running carbon-cache.py and carbon-aggregator.py using daemon tools. When I made some changes in the storage-schema.conf and tried to restart the carbon-cache.py, I found that it is becoming zombie very frequently. root 3367 3366 0 03:23 pts/1 00:00:00 supervise carbon-aggregator root 3371 3366 0 03:23 pts/1 00:00:00 supervise carbon-cache root 3373 3367 3 03:23 pts/1 00:00:02 /usr/bin/python /usr/bin/carbon-aggregator.py --debug start root 3379 3372 0 03:23 pts/1 00:00:00 multilog t /var/log/multilog/carbon-cache root 3382 3368 0 03:23 pts/1 00:00:00 multilog t /var/log/multilog/carbon-aggregator root 3638 3371 21 03:24 pts/1 00:00:00 [carbon-cache.py] <defunct> Can someone tell me what may be the reason ?

  Read the article

• sudoer scheme for a web developer that retains future control of a server?

  - by Tchalvak

  Background I have a server that I'm looking to set up, and provide access to another web developer. I don't want to put many constraints on him, though I wouldn't mind isolating the site that he'll be developing from others on the server that I will develop. The problem Mainly what I want is to make sure that I retain control over the server in the future. I want to reserve the ability to create/promote/demote and other administrative functions that don't deal with web software. If I make him an admin, he can sudo su - and become root and remove root control from me, for example. What is a good setup for the sudoers file so that he can do things like: *install software (through apt-get) restart apache access mysql configure mysql/apache reboot edit web development configuration type files in /etc * And can't do things like: take away other admin permissions change the root password have control over other security/administrative functions Example sudoer files that accomplish something like that could be useful, I'm sure that people have needed to do this before.

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >