Search Results

Search found 16616 results on 665 pages for 'home sharing'.

Page 365/665 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

• Connection manager detects network but won't connect

  - by Carson Chittom

  I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

  Read the article

• Announcement Ramp-Up Days

  - by michaela.seika(at)oracle.com

  We are glad to announce a new training format: Ramp-Up Days to support some of the most preferred specializtion topics (e. g.: Oracle DB11g Implementation Specialist and Oracle DB 11g RAC Implementation Specialists) It is a one day trainer-led course on one Oracle Specialization topic. The course takes place at an Oracle Partner with a Pearson Vue Testcenter nearby. Partners can do their assessment by the end of the training and walk home as implementation specialist the very same day. Please have a look to our schedule for Ramp-Up Day so far (more to come): Ramp-Up Days in Germany & SwitzerlandRamp-Up Days in Italy

  Read the article

• LogMeIn style remote access to NAS drive

  - by Mere Development

  I've been asked to setup some remote access to a NAS drive. The NAS drive will sit on a VLAN inside a network that uses a Cisco 891 IS router as gateway. The charity have no SSL-VPN licenses for the Cisco. At present there are no open ports or services on the Cisco itself and ideally we would like to keep it that way for a while, hence the request for a LogMeIn style service that's initiated from inside. We need multiple user access, about 10 max. Using LogMeIn on a machine connected to the NAS would only provide screen sharing I believe, and no concurrent connections (could be wrong?) The end users need to be able to read and write files to the NAS from Mac's and PC's around the globe. Read-only access from Mobile devices would be a bonus but not absolutely necessary. This is for a charity, non-commercial, but they are willing to spend if necessary. Cisco config knowledge is at a minimum so if I can avoid upsetting that delicate device I'll be happy :) Anyone have any clever ideas? I can provide more information on request. Thanks, Ben

  Read the article

• Ubuntu 12.04 LTS x86_64 sound artifacts when scrolling with firefox

  - by Nh3xus

  I've been using Ubuntu since the 10.04 LTS version and i have a sound problem that still remain in my fresh install of the 12.04 LTS AMD64 version. This install has been performed by formatting the / partition and my documents were kept safe in the separated /home partition. The problem : When i listen to a audio or video source while browsing the web with Firefox, I have some sound artifacts when i'm scrolling and stops when i'm not doing it. This happens when i'm doing X11 related actions too, such as switching between virtuals desktops. Computer configuration of my laptop : - Ubuntu 12.04 LTS AMD64 - Plantronic USB Headphones - Intel HDA Audio sound card (laptop) with SigmaTel STAC9200 chip - AlsaMixer v 1.0.25 - Nvidia GeForce 7950 GTX with Nvidia 295.40 driver Any advices are welcome here :) Note : This is my first post on AskUbuntu.

  Read the article

• The provider did not return a ProviderManifestToken string Entity Framework

  - by PearlFactory

  Moved from Home to work and went to fire up my project and after long pause "The provider did not return a ProviderManifestToken string" or even More Abscure ProviderIncompatable Exception Now after 20 mins of chasing my tail re different ver of EntityFramework 4.1 vs 4.2...blahblahblah Look inside at the inner exception A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible DOH!!!! Or a clean translation is that it cant find SQL or is offline or not running. SO check the power is on/Service running or as in my case Edit web.config & change back to Work SQL box   Hope you dont have this pain as the default errors @ the moment suck balls in the EntityFramework 4.XX releases   Cheers

  Read the article

• Video player with good subtitle rendering

  - by Oxwivi

  Is there any way to improve the subtitle rendering capabilities of Totem? The subtitles positioning seems to be hard-coded in it and even though the style is user-customizable, it does not confirm to the formatting in subtitle data. In some scenes where writings appear, the subtitles are supposed to appear next to those along with what is being said at that moment. However, on those scenes the translations of text onscreen appears on the default subtitle area with nothing about the things being said. The correct rendering are according to the open-source Windows video player, Media Player Classic - Home Cinema. There are no Linux port as far as I'm aware. If VLC's subtitle support is the same as in Windows, it won't work for me, period. Please suggest anyway to improve subtitle rendering in Totem, other video players, or a way to port MPC-HC.

  Read the article

• How to create a shared folder using command line on a server

  - by sadmicrowave

  After following the tutorial here I ran into a problem. Here is what I did. On my server I installed nfs-kernel-server and edited the /etc/exports file to include the folder I want to share: /var *(rw,sync) On my client machine I edited my fstab file to include share: //128.251.xxx.xxx/var/ ~/uslonsweb003 nfs #username=[username],password=[password], 0 0 Entered command: sudo mount -a which gives this error: mount.nfs: remote share not in 'host:dir' format Where did I go wrong with this setup? Also if there is a better way (using command line) to setup a folder share on an Ubuntu 10.10 server that will be accessed by other linux and windows machines please let me know. UPDATE: The mapped drive is now not letting me create,edit,delete files or folders (readonly access) my configuration is as follows: client fstab file: 128.251.xxx.xxx:/var /home/coreyf/uslonsweb003 nfs rw,hard,intr, 0 0 server exports file: /var *(rw,no_root_squash,sync,no_subtree_check) UPDATE 2: Using Allans solution my drive mounted correctly however after putting rw,intr as my additional parameters I cannot create, edit and delete folders/files.

  Read the article

• How To Properly Scan a Photograph (And Get An Even Better Image)

  - by Eric Z Goodnight

  Somewhere in your home, there’s a box of old analog photographs you probably want digital copies of. Unless you know how to use your scanner correctly, the image quality can turn out poor. Here’s how to get the best results. If your memories are important to you, then it’s worth taking the time to do them right. Today we’re going to look at the largely overlooked tools and methods that’ll give you the best possible quality out of a scan of a less than perfect photo. We’ll see how to make the most of the scanning software and how to use graphics programs to make the image look better than the original photograph. Keep reading! How To Properly Scan a Photograph (And Get An Even Better Image) The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume Make Your Own Windows 8 Start Button with Zero Memory Usage

  Read the article

• When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

  - by Jessica K

  I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

  Read the article

• SOA Suite 11g: Unable to start domain (Error occurred during initialization of VM)

  - by Chris Tomkins

  If you have recently installed SOA Suite, created a domain and then tried to start it only to find it fails with the error: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. the solution is to edit the file <domain home>\bin\setSOADomainEnv.cmd/sh (depending on your platform) and modify the line: set DEFAULT_MEM_ARGS=-Xms512m -Xmx1024m to something like: set DEFAULT_MEM_ARGS=-Xms512m -Xmx768m Save the file and then try to start your domain again. Everything should now work at least it does on the Dell Latitude 630 laptop with 4Gb RAM that I have. Technorati Tags: soa suite,11g,java,troubleshooting,problems,domain

  Read the article

• Tri-Boot Win 7 64+Ubuntu 12.04+BackTrack 5

  - by Volchonoc

  I'd like to know what is the best procedure for doing a Tri-boot? I don't want to re-size windows partition I want to re-install it from scratch. I heard that it's better to install windows first, but will windows allow me to create the right partition structure? And what i the best structure? should I create a primary for windows and extended for everything else? If so what should my logicals be: 1)Ubuntu+2)SWAP(shared)+3)BackTrack root+4)BackTrack home, or should I just make 4 primary 1)win+2)Ubuntu+3)BackTrack+4)SWAP. And what are the formats I should choose for Linux partitions? I would appreciate any info on this topic Thank You

  Read the article

• How to set-up a simple subversion workflow

  - by Milen Bilyanov

  I am trying to set-up a simple SVN workflow at home. I am new to subversion (and programming) so I have been reading the official PDF documentations but still not sure about how to set-up my repository. I am working mainly with python, bash and rsl (Renderman Shading Language) So I already have a /dev structure on my disk as this: http://imageshack.us/f/708/devstructure.png/ And I have a /site structure that links to my /dev folder: http://imageshack.us/f/651/sitestructure.png/ So obviously starting to use SVN will change this approach that I already have in place. The question is when I am setting-up my SVN repository for the work I do in my /dev folder: Will I set-up a separate repository for each different programming platform? and Where exactly I should be placing my repository? Thanks.

  Read the article

• Icons missing from launcher, system settings, folders

  - by Giannis Rizos

  Various icons from launcher are missing. The first one is from Home folder menu the second from Terminal the last one from Desktop Switcher. This happened after I upgraded to 11.10 from 11.04. I have created a New (Untitled Folder) folder in my desktop and the icon is missing too. The same occurs in System Settings menu too. Some icons like Appearance, Keyboard Layout are missing too. Sorry but I can't post a screenshot due to my reputation. Any suggestions?

  Read the article

• How to connect a USB GDI printer to Linux over a D-Link print server?

  - by jpe

  The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

  Read the article

• Folder redirection GPO doesn't seem to be working

  - by user57999

  I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

  Read the article

• Constructive criticism for my bounce rate being so high [closed]

  - by Daniel

  The bounce rate on my website's product pages is 80%, which is terrible. Could you offer any opinions on whether you consider the user experience to be bad, and how I could possibly improve it? Other pages, such as the home and category pages, have acceptable bounce rates, but the vast majority of my traffic lands on the product pages. I already tried removing some Google ads for a couple of days, but this didn't seem to help at all. I'm working on doing A/B testing at the moment. (It's tricky, as the site is based on a CMS - I custom coded the [Joomla] component, so hopefully I can get this testing working.)

  Read the article

• Windows Server - share files without access for administrator

  - by Pawel

  We have a MS Windows Server 2008 R8 based server that is administrated by our IT department. We would like to achieve two things simultaneously: A folder on the server, containing several thousand files (new files added frequently) that is accessible to some ActiveDirectory users (e.g. board of directors) but is not accessible by IT department employees IT department employees still maintain rights to administrate the server, including installing new software and services We already checked some solutions: Using NTFS access rights. Unfortunately IT (members of "Administrators" group) can set themselves as new owners of the files and change the permissions so that they gain access to the files. Enabling EFS. Unfortunately even if you do not allow IT to access files, they still can disable EFS completely because they have administrative rights. Moreover as far as I know you have to manually add permissions for all users but the owner for each new file - very inconvenient. Creating a new role for the IT department that has all the privileges apart from taking ownership of files. Unfortunately if you're not a member of the Administrators group, you cannot install new software, no matter what privileges you add to the role. TrueCrypt - nice free encryption software, but with poor sharing capabilities. You can either mount an encryption container on the server (and then IT has access to its contents) or you mount them locally but only one user can mount it for writing. AxCrypt - free encryption software that enables file-by-file encryption on the server. There are some disadvantages though - you have to manually encrypt each new file added. The files have their extensions changes. You can only set one password for all files (so all users have to know this one password). Any other ideas? Our budget is limited so enterprise-class software from Symantec or PGP would probably be not an option.

  Read the article

• Windows 7 can't see wireless printer

  - by Chance Robertson

  I have a P1102W printer from HP. I have a Windows 7 machine. I have a MacBook Pro. I setup the printer following the instructions from the Windows 7 machine. I am able to print from the Mac but not the Windows 7 machine. And to add, I am not able to print from any Windows 7 machines. The MacBook Pro address is 198.168.2.115, the Windows machine is 192.168.2.117, and the printer in 192.168.2.140. I can ping the printer from the Mac. I can ping the Windows 7 machine from the mac. I can ping the mac from the windows 7 machine. When I try to ping the printer from the Windows 7 machine I get destination unreachable. I can browse to the printer IP address from the mac and not the Windows 7. I have turned off the firewall on the Windows 7 machine and turned on network sharing. Is there something else I am missing. I can connect the printer with a USB cable to the Windows machine and print. I can not get the Windows machine to see the printer even though they are on the same network.

  Read the article

• How do I push code to github on shutdown?

  - by Ezequiel

  I switch between working at home and the office, and sometimes, like today, I forget to run a git commit/push. (I find it easy to ignore the command line since I'm still kind of a beginner, there.) How can I make it so that when I shut down my Ubuntu OS, it will follow this process: Check my local code against the github server, executing the rest of this script only if I've made newer changes. Add all new files. Make commits with a basic default comment. Push all changed code to origin master. If anyone knows how to do this, it would be a major assist. Also, anyone know how to do it for Mac OSX? :D

  Read the article

• How can I force the (re)discovery of PulseAudio network sound devices?

  - by Christian

  I'm using the PulseAudio feature of network sound devices (not Multicast/RTP) to play sound from my netbook on the audio equipment connected to the HTPC when at home. This creates a virtual sound device that I can then use instead of the physical built-in one. Most of the time this works just fine. Sometimes however, the virtual sound device just doesn't appear. Disconnecting from and reconnecting to the network helps sometimes but not always and it's annoying and potentially bad for existing TCP connections. So my question basically is: Is there some way to tell PulseAudio "Hey, just look again if you really can't find a network sound device."? Edit: Unloading and reloading the module-zeroconf-discover with pacmd does not help either and it doesn't appear to be an avahi problem per se since avahi-browse -t --all | grep PulseAudio shows lots of right-looking stuff, even when the devices aren't listed in pavucontrol or pacmd list-sinks. Edit 2: I'm using Ubuntu 12.04 on both boxes for all the difference it might make.

  Read the article

• How can I change the wallpaper using a Python script?

  - by furtelwart

  I want to change my wallpaper in Ubuntu 11.10 (with Unity) in a small Python script. I found the possibility to change it via the gconf-editor in /desktop/gnome/background/picture_filename. With python-gconf, I'm able to change the necessary values. Apparently, the gconf string is not read out. If I change it (either via a script or via gconf-editor), the wallpaper remains and in the menu of "Change wallpaper", the old wallpaper is shown. How am I able to change the wallpaper for Unity via a Python script? The following code does work. Apparently, the gsettings are only applied, if some Gtk code is executed. #!/usr/bin/python # -*- coding: utf-8 -*- from gi.repository import Gtk, Gio class BackgroundChanger(): SCHEMA = 'org.gnome.desktop.background' KEY = 'picture-uri' def change_background(self, filename): gsettings = Gio.Settings.new(self.SCHEMA) print(gsettings.get_string(self.KEY)) print(gsettings.set_string(self.KEY, "file://" + filename)) Gtk.Window() print(gsettings.get_string(self.KEY)) if __name__ == "__main__": BackgroundChanger().change_background("/home/user/existing.jpg")

  Read the article

• Wiped data, and duplicated folders into files.

  - by Kaustubh P

  Something weird happened today, and I dont know how. Within a folder, all folders have a file by the same name, with a colon appended to it. And all the files from the most inner-most directory in my home, have been dumped to ~, with a size of 0 bytes. I have not executed any scripts or anything. I was just checking out some easter eggs, namely the gegls from outer space and free the fish and was away from the computer and was logged because of the screensaver. I couldnt log-back in with my password, so I just reset the PC, and while booting, the PC went into a drive check. BUT, IIRC, i saw the duplicate "folder files" before I had logged out, so thats not the reason! All the files have a timestamp of 14 Jan. Also, the contents of my eclipse folder have been dumped into ~. Right down to the jars and ini files. HELP!

  Read the article

• Operation not permitted for chown : For a domain user directory

  - by Lunar Mushrooms

  I am trying to change ownership of a domain user home directory, which is mounted over nfs. Current user/group for that folder is nobody/nogroup. The following chown command is issued from "root" user shell. But I am getting permission error. How to resolve this ? sudo chown -Rv VANILLA\\userone:VANILLA\\domain^users /lhome/VANILLA/userone chown: changing ownership of `/lhome/VANILLA/userone': Operation not permitted failed to change ownership of `/lhome/VANILLA/userone' from nobody:nogroup to VANILLA\userone:VANILLA\domain^users My OS is Ubuntu LTS 12.04 32 bit.

  Read the article

• Can not start webhttrack

  - by Sitati

  I am trying to start my webhttrack on ubuntu 12.04 precise pangolin but all i get is the opening screen. When i press any button on the page it gives me the following errors: Oops! Google Chrome could not connect to barney:8081 Suggestions: Try reloading: barney:­8081/­server/­step2.­html i tried to run from a terminal window and get the output here: webhttrack /usr/bin/webhttrack(4405:( launching /usr/bin/x-www-browser /usr/bin/webhttrack(4405:( spawning regular browser.. Created new window in existing browser session. /usr/bin/webhttrack(4405:( browser exited /usr/bin/webhttrack: line 167: 4422 Killed ${BINPATH}/htsserver "${DISTPATH}/" path "${HOME}/websites" lang "${LANGN}" $@ If anyone can help me i appreciate it.

  Read the article

• How do I connect a Nexus 7 to transfer files?

  - by gotqn

  I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

  Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >