Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 365/779 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

  • Is there a work around to configure brightness or color on a DisplayLink monitor?

    - by shaneykakes
    I run 3 monitors in addition to my laptop display at work - two of the monitors are using DisplayLink adapters. I've always thought that all my displays were too bright (and possibly give me headaches?) - even after I reduced their brightness as far as possible using the monitor menus and the nvidia software control panel. Recently I installed f.lux - I love it's "halogen" color profile which has improved my life considerably. The problem is that f.lux has no effect on/will not adjust the color & brightness of my two DisplayLink monitors. F.lux has a faq (#4 under troubleshooting) that addresses this - saying DisplayLink has no support for color calibration so f.lux only works with monitors "directly connected to your computer". Does anyone know of a work around? Specifically a way to use windows color management/profiles (or some other software) to adjust the brightness/color tone of DisplayLink monitors? Thanks in advance!

    Read the article

  • Can't create a registry key under Eventlog and I am in administrators group

    - by Tony_Henrich
    I am troubleshooting an installer problem where it's giving an error writing to a registry key. So when I use the Registry Editor (regedit) to create the same key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog, I get a "Cannot create key: Error writing to the registry". Looking at the permissions, administrators have full access and I am a member of that group. I can create entries in other areas in the registry. When I try to take ownership, I see my name already listed. But then I get an error "Unable to set new owner on Eventlog. Insufficient system resources exist to complete the requested service". I tried after a new reboot. I turned off my firewall (Comodo). Why can't I create a new key when I am an admin and permissions indicate I have full control?

    Read the article

  • Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

    - by vocoder
    I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

    Read the article

  • Does it actually matter whether you have open applications when installing new software?

    - by Dan
    It seems the norm these days is for installers/setup programs to request that you close all open applications before initiating the install process for a piece of new software. I used to obediently follow these directions without fail, even though it could sometimes be frustrating having to close open documents and stop working on things just to get a new, seemingly unrelated application installed. Then at some point I simply stopped bothering. Nowadays if I have a lot of stuff going on I might even run multiple installers at the same time; I can't even recall a time it has ever posed a problem. Why do setup programs even make this request in the first place, then, when it appears to be unnecessary? Is this just to simplify troubleshooting for companies' support people? Has anyone else ever run into problems as a result of trying to install an app while other apps were open?

    Read the article

  • Can ping device from one computer and not the other

    - by Sean Duggan
    I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

    Read the article

  • Microsoft Office Compatibility Pack "The converter failed to open the file" error & "This is a pre-release version"

    - by HaydnWVN
    What issues have people encountered with older OS's (2000, XP) and olders versions of Microsoft Office (2000, XP, 2003) with the 'Microsoft Office Compatibility Pack'? I have a couple of Windows 2000 client PC's encountering different errors when attempting to open .docx or .xlsx documents, some with Office XP and the others with Office 2003. Reading through forums it appears that the different versions of the compatibility pack, not all were compatible with Windows 2000 (versions 3 & 4 are not). There are also Service Packs for the Compatibility Pack. With these Windows 2000 clients, it seems i need the Compatibility Pack version 2, then to install the Service Packs, yet i'm unable to find a link for version 2 of it. First error message: "This is a pre-release version of the Compatibilty Pack and can open pre-release Office 2007 files only." Is solved below. Second error message: "The converter failed to open the file." My troubleshooting is still on-going.

    Read the article

  • HP Photosmart 7450 Prints Noise On Windows 7 Pro 64-bit

    - by David Mackintosh
    I have received a working (in its last location) HP Photosmart 7450 printer. I connected it up to my Windows 7 Pro 64-bit workstation, and the driver was (apparently) installed. The problem is that whenever I try to print from it -- test page, text from notepad, picture, whatever -- it spins through a half dozen sheets of paper, some of which have fractions of text on them, but most of which are either blank or have line noise printed on them. Noise similar to what was printed out on ye olde laserjet printers when the postscript interpreter failed. HP's web site only has a "use the included driver in Windows 7, be happy" instruction. The driver has been removed and added several times. The printer was previously attached to a XP Home computer and worked correctly without incident. Does anyone have any ideas for troubleshooting before I drop this printer in the river?

    Read the article

  • DokuWiki Segmentation Fault On Radius Auth

    - by mrduclaw
    I'm running x64 Ubuntu 12.04. I did a simple apt-get install dokuwiki to install DokuWiki. And I'm trying to follow the directions located here: http://www.dokuwiki.org/auth:radius to get Radius authentication working. Things seemed to install OK. Under Configuration Manager I selected Authentication backend to be "Radius" and filled in the Radius details at the bottom. Now, however, whenever I try to log into the Wiki, my browser gives me the following error: No data received I checked /var/log/apache2/error.log and see this: [Tue Jul 10 22:22:14 2012] [notice] child pid 5270 exit signal Segmentation fault (11) I'm fairly sure the Radius server is setup correctly as it correctly authenticates with my squid proxy and other stuff on the network. But this is about the extent of my Linux troubleshooting skills. Can anyone suggest steps for me to follow to help track down what's causing apache2 to segfault short of attaching with gdb and issuing a set follow-fork-mode? I'm also open to just hearing suggestions for simila

    Read the article

  • How to troubleshoot suspend and hibernate in Ubuntu

    - by Aerik
    I have Ubuntu Lucid installed on a Panasonic Toughbook CF-29. Most things work well, but, under Gnome, suspend and hibernate do not work. Interesting, in Xubuntu, hibernate does work. So my question is twofold: How do I troubleshoot the hibernate function in Gnome desktop (since I know the laptop can hibernate in Ubuntu), and How to go about troubleshooting the suspend function? I got as far as looking at the /var/log/pm-suspend.log, but that just tells me the things that ran successfully... I'm kind of stuck there.

    Read the article

  • VMWare esxi 4.1 storage errors with MD3200

    - by Karl Katzke
    We're seeing some storage errors from the esxi logs relating to our MD3200. I'm sort of a VMWare noob and am not sure where to go from here because I couldn't find a lot of documentation on the VMWare website, and the forums didn't seem to have any posts about it with actual answers. Everything is working, but I'm trying to proactively troubleshoot this. sfcb-vmware_base|StoragePool Cannot get logical disk data from controller 0 sfcb-vmware_base|Volume Cannot get logical disk data from controller 0 sfcb-vmware_base|storelib-GetLDList-ProcessLibCommandCall failed; rval = 0x800E The ESXi boxes are connected directly via SAS to the controller on the MD3200. What do these errors actually mean, and what's a good path to start troubleshooting or solving them?

    Read the article

  • FTP issue - VSFTPd and connecting to from FileZilla

    - by B Tyndall
    I'm trying to connect to a CentOS Linux box that I have hosted on EC2 and I think I have everything configured correctly but when I try to connect I get this series of messages Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.0.5) Command: USER tyndall Response: 331 Please specify the password. Command: PASS ********* Response: 230 Login successful. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/tyndall" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing Not sure where to start troubleshooting this issue. Any ideas? Do I need to change any permissions? I would think this ID has the ability to see my own home directory. I am able to push/pull files from the command line version of FTP client working on Windows.

    Read the article

  • How to setup tomcat 7 as a server on windows 2008 server

    - by birdy
    I setup the tomcat7 as a service as below: c:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32\bin>service.bat install Installing the service 'Tomcat7' ... Using CATALINA_HOME: "C:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32" Using CATALINA_BASE: "C:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32" Using JAVA_HOME: "C:\Program Files (x86)\Java\jdk1.7.0_09" Using JRE_HOME: "C:\Program Files (x86)\Java\jdk1.7.0_09\jre" Using JVM: "C:\Program Files (x86)\Java\jdk1.7.0_09\jre\bin\server\ jvm.dll" However, when I try to start the service, I Get the error below: c:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32\bin>tomcat7.exe %1 is not a valid Win32 application. Failed to run service as console application This is the file I downloaded from apache: apache-tomcat-7.0.32-windows-x64.zip. I am able to successfully start tomcat on port 8080 as a standalong thing. Meaning I go to command prompt and type startup.bat and it starts up successfully. Question How can I resolve this and what are the things I should be troubleshooting for?

    Read the article

  • Why is my vhosts file interfering with my apache deployment?

    - by Avery Chan
    When I enable my vhosts file (i.e. uncomment this line: Include /private/etc/apache2/extra/httpd-vhosts.conf) I am unable to reach localhost. I /am/ able to reach the last virtual host listed in my vhosts file: <VirtualHost *:80> DocumentRoot "/Users/achan/Sites/epwbst" ServerName epwbst </VirtualHost> <VirtualHost *:80> DocumentRoot "/Users/achan/Sites/pxproj" ServerName pxproj </VirtualHost> Typing pxproj in my browser brings up the expected web content. But I am unable to reach epwbst or localhost. If I re-comment the vhost line in my httpd.conf, I am able to reach local host (i.e. "It works!") but obviously am unable to reach my virtual hosts. I don't know how to continue troubleshooting this. Why can't I reach localhost when I've got my vhosts turned on? OS: Mac OS X 10.7 Server version: Apache/2.2.21 (Unix)

    Read the article

  • Asterisk does not recognise DTMF tones from mobile phones

    - by Eugene van der Merwe
    We have an Asterisk 1.8.7.0 (the Elastix derivative) switchboard. Every since a month ago, seemingly out of the blue, the switchboard does not recognise DTMF tones any more from mobile phones. Testing the switchboard using 7777 works. Testing the switchboard from a normal phones works. Testing the switchboard from a mobile phone fails. Looking at the log file I can't see anything. I used 'asterisk -rvvvv' and 'tail -f /var/log/asterisk/full' to see the live output and scan the logs. I guess I don't see anything because it's simply not recognising the DTMF tones. I did brief research and found an old setting for SIP phones, 'rfc2833compensate=yes', and tried adding this to 'sip_general_custom.conf'. After that I did 'core restart when convenient' but that didn't make any difference. Could anyone give me some additional troubleshooting steps?

    Read the article

  • Java application crashes my computer. How do I troubleshoot?

    - by Oded
    I am using NetBeans 4.1 for my university course (this is an older version, but is the required version for the course - I can't use a newer version). Whenever I use it for longer than several minutes, my computer crashes - it either reboots or I need to reset it. I have tried running with all startup items disabled (to rule out other applications interfering with the app), but it did no good. I have used Sysinternals procmon logging and the logs are corrupt - the only way I was able to get a good log was by enabling boot logging. However these are huge and I don't know what to look for. I am using Windows XP SP3, fully patched up and this is the only application that I have any kind of problem with. Can anyone suggest troubleshooting steps that will help me pinpoint the cause of these crashes and fix them?

    Read the article

  • Hypertransport sync flood error

    - by Carl B
    What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

    Read the article

  • Cannot login to XP SP3 in VMWarePlayer virtual machine in safe mode

    - by Alper
    Hello, Here is my setup Host OS: XP SP3 Guest OS: XP SP3 (using VMWare) I checked the /SAFEBOOT option in System Config utility in guest for troubleshooting. Now the guest OS boots up in Safe Mode but I cannot login with my user id/password. Here is what I tried: [domainName]\[userid] for user name = Login Fails Administrator with blank password = Login fails Safe Mode with Networking = Login fails Safe Mode with Command Prompt = Login fails Last Known Good Configuration = starts in safe mode, login fails Start Windows Normally = starts in safe mode, login fails Don't have cd to get to the recovery console Any ideas?

    Read the article

  • Does anyone still use Iometer?

    - by Brian T Hannan
    "Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems. It is used as a benchmark and troubleshooting tool and is easily configured to replicate the behaviour of many popular applications." link text Does anyone still use this tool? It seems helpful, but I'm not sure if it's for the thing I am trying to work on. I am trying create a benchmark computer performance test that can be run before and after a Windows Optimization program does its stuff (ex: PC Optimizer Pro or CCleaner). I want to be able to make a quick statement like CCleaner makes the computer run 50% faster or something along those lines. Are there any newer tools like this one?

    Read the article

  • What would cause previously sent emails to be sent again from Exchange the first time someone logs i

    - by Ken Pespisa
    A few users testing our Citrix XenApp service found that several (seemingly random) previously sent emails were sent out immediately after they logged into Outlook via Citrix for the first time. The problem hasn't occurred for them since. After one user had this happen, and we scratched our heads about it thinking it was a fluke, our IT director had this same issue. I guess I'd rule out any PEBKAC issues. I really don't know where to begin troubleshooting this problem. If you have any ideas what could have caused this, I'd appreciate you sharing them, as strange or far-fetched as they may seem :)

    Read the article

  • Windows 7 can't make back up

    - by J. Pablo Fernández
    I've been trying to get Windows 7 to make a backup for a week or so. I'm backing up to a local NAS and I'm getting this error: Windows Backup: Troubleshooting Options Check your backup Windows Backup could not create a zip file. This could be because the drive that Windows is installed on does not have enough space or it could be a temporary error. Make sure you have at least 400 MB of free space and try again. Backup time: 2009-09-07 14:48 Backup location: \VANGELIS\Shared\Backup\lennon\ Error code: 0x81000015 My local hard disk has 290GB free and my NAS has 200GB free. Any ideas what might be wrong?

    Read the article

  • Reliable procedure/tool for removing print drivers in Windows 7 (domain environment)

    - by ultrasawblade
    One of the troubleshooting steps in resolving printer-related issues with any version of Windows is to remove installed print drivers and then reinstall the drivers. This is a domain environment and drivers are pulled from a print server. I've had occasion to need to do this on a user's system running Windows 7 Enterprise 64-bit. These procedures don't work: Removing the printer from Devices and Printers (doesn't remove driver obviously) Doing the above, going into Server Properties, and attempting to remove the driver (fails with a "driver in use" error) Opening an empty mmc, adding the Print Management snap-in, and attempting to do the above. Doing sc stop spooler and sc start spooler before doing both of the above Now I know it's possible to remove drivers with the spooler service stopped and then going into the spool directory, as well as deleting registry entries. I'm asking if a tool exists to do this where I can just select the driver in question and it be removed.

    Read the article

  • Cannot access any remote resource after connecting to Cisco VPN on Vista

    - by Deepak Singh Rawat
    I have installed Cisco vpn client version 5.0.07.0290 on Vista Business SP2. I am able to successfully connnect to the vpn. But after connecting I am not able to access any resource in the vpn (like database, other computers in the network etc.). I have tried the following without any success : Older versions of the client Other vpn clients like Shrewsoft : same issue as the cisco vpn client Disabled Internet Connection Sharing service Installed the client in the root administrator account Run the installer as administrator Run the vpngui and ipsecdialer in XP compatibility mode and as administrator I am not sure how to troubleshoot this issue. Can somebody please help me in troubleshooting this issue? P.S : I've Zonealarm firewall, can that be an issue?

    Read the article

  • My internet drops and will only reconnect if I troubleshoot it or restart my computer.

    - by Paul
    My internet loses its connection and at the same time, and my speaker seems broken if that happens and my mouse will not be smooth as it was before it happens. It already happened before and I didnt mind it. But now, it's happening literally all the time. After startup, my connection seems okay but after some few minutes, even without me doing something, my laptop will just lose its connection. It says that it is not connected and connections are available, but if I check if there are connections where I can connect it shows nothing. Even if, there is actually a wi-fi connection where my phone and other laptops connect. They dont seem to have problem with it. Just my laptop. After that happens, I usually restart my laptop but I discovered that troubleshooting it would somehow repair the problem, but not all the time. It says that restarting my wireless adapter do the job. Are there any long term fix? I mean that could last long or totally erase the problem? I have Atheros AR5B97 Wireless Network Adapter and Microsoft Virtual WiFi Miniport Adapter, both enabled. On the services, I have Wired AutoConfig and WLAN AutoConfig on Automatic. Aspire 4750, Windows 7 (x86)

    Read the article

  • Outlook - Out Of Office can't set

    - by derjur
    Exchange 2007, Outlook 2010 Error when setting Out Of Office (Automatic Replies) from Outlook: Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later. Setting this through OWA works fine. Autodiscover is working, and all addresses are resolvable through DNS. Outlook profile created from scratch. Anonymous access disabled for EWS/OWA (IIS on Exchange box). I'm out of steam for troubleshooting. Any ideas?

    Read the article

  • Upgrading Fedora 16 to 17 with crypted LVM

    - by nijansen
    As the title suggests, I want to upgrade Fedora 16 to the Fedora 17 Alpha build, but I am struggling to do so because of my crypted HDD. To avoid the hustle of CD-ROM or USB install, I thought the preupgrade would be a good idea. It downloads the stuff, stores an image somewhere and creates an entry in my boot manager. When I choose to upgrade from the boot manager it crashes halfway through because it can not access any of the prepared files (because it's crypted) and hands me a debug console. Unfortunately, this case apparently is not covered by the Fedora troubleshooting advice, at least I was not able to find anything there. I would guess I have to mount my HDD manually, but 1) how? and 2) how do I resume the upgrade afterwards? I would really appreciate a push in the right direction.

    Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >