Search Results

Search found 13082 results on 524 pages for 'recovery mode'.

Page 365/524 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

  • Bidirectional Serialization with Linq

    - by Andy
    Anyone know why only undirectional serialization is supported in the Linq designer? Consider the following example: Say we have a Customer who requested an Order containing Products. We set the Serialization Mode in the Linq designer to Unidirectional to enable serialization. When looking at the code for the Order object, the DataMember attribute is added to all its internal properties such as ID,OrderNumber, etc. and also to the EntitySet of Products, but not to Customer. One can get around this by manually adding the DataMember attribute to Customer, but this becomes quite cumbersome when there's loads of entities in the database.

    Read the article

  • Strange exception when connecting to a WCF service via a proxy server

    - by Slauma
    The exception "This operation is not supported for a relative URI." occurs in the following situation: I have a WCF service: [ServiceContract(ProtectionLevel=ProtectionLevel.None)] public interface IMyService { [OperationContract] [FaultContract(typeof(MyFault))] List<MyDto> MyOperation(int param); // other operations } public class MyService : IMyService { public List<MyDto> MyOperation(int param) { // Do the business stuff and return a list of MyDto } // other implementations } MyFault and MyDto are two very simple classes marked with [DataContract] attribute and each only having three [DataMember] of type string, int and int?. This service is hosted in IIS 7.0 on a Win 2008 Server along with an ASP.NET application. I am using an SVC file MyService.svc which is located directly in the root of the web site. The service configuration in web.config is the following: <system.serviceModel> <services> <service name="MyServiceLib.MyService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingConfig" contract="MyServiceLib.IMyService" /> </service> </services> <bindings> <wsHttpBinding> <binding name="wsHttpBindingConfig"> <security mode="None"> <transport clientCredentialType="None" /> </security> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior> <serviceMetadata httpGetEnabled="false"/> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> This seems to work so far as I can enter the address http://www.domain.com/MyService.svc in a browser and get the "This is a Windows Communication Foundation Service"-Welcome page. One of the clients consuming the service is a console application: MyServiceClient aChannel = new MyServiceClient("WSHttpBinding_IMyService"); List<MyDto> aMyDtoList = aChannel.MyOperation(1); It has the following configuration: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IMyService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="true" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="false" proxyAddress="10.20.30.40:8080" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://www.domain.com/MyService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IMyService" contract="MyService.IMyService" name="WSHttpBinding_IMyService" /> </client> </system.serviceModel> When I run this application at a production server at a customer site calling aChannel.MyOperation(1) throws the following exception: This operation is not supported for a relative URI. When I run this client application on my development PC with exactly the same config, with the exception that I remove proxyAddress="10.20.30.40:8080" from the bindings the operation works without problems. Now I really don't know what specifying a proxy server address might have to do with absolute or relative URIs. The use of the proxy server or not is the only difference I can see when running the client on the production or on the development machine. Does someone have an idea what this exception might mean in this context and how possibly to solve the problem? Thank you in advance for help!

    Read the article

  • How do I rotate only some views when working with a uinavigationcontroller as a tab of a uitabbarcon

    - by maxpower
    Here is a flow that I can not figure out how to work. ( when I state (working) it means that in that current state the rules for orientation for that view are working correctly) First View: TableView on the stack of a UINavigationController that is a tab of UITabBarController. TableView is only allowed to be portrait. (working) When you rotate the TableView to landscape a modal comes up with a custom UIView that is like a coverflow (which i'll explain the problem there in a moment). A Selection made on tableview pushes a UIScrollview on to the stack. UIScrollView is allowed all orientations. (working) When UIScrollView is in landscape mode and the user hits back they are taken to the custom UIView that is like the coverflow and only allows landscape. The problem is here. Because the UIScrollView allows full rotation it permitted the TableView to rotate as well to landscape. I have a method attached to a notification "UIDeviceOrientationDidChangeNotification" that checks to see if the custom view is the current controller and if it is and if the user has rotated back to portrait I need to pop the custom view and show the table view. The table view has to rotate back to portrait, which really is okay as long as the user doesn't see it. When I create custom animations it works pretty good except for some odd invisible black box that seems to rotate with the device right before I fade out the customview to the tableview. Further inorder to ensure that my tableview will rotate to portrait I have to allow the customview to support all orientations because the system looks to the current view (in my code) as to whether or not that app is allowed to rotate to a certain orientation. Because of this I many proposed solutions will show the customview rotating to portrait as the table view comes back to focus. My other problem is very similar. If you are viewing the tableview and rotate the modalview of the customview is presented. When you make a selection on this view it pushes the UIScrollview onto the stack, but because the Tableview only supports portrait the UIScrollview comes in in portrait while the device is in landscape mode. How can I overcome these awful blocks? This is my current attempt: When it comes to working with UITabBarController the system really only cares what the tabbarcontroller has to say about rotation. Currently whenever a view loads it reports it supported orientations. TabBarController.m - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { switch (self.supportedOrientation) { case SupportPortraitOrientation: [[UIApplication sharedApplication] setStatusBarHidden:NO animated:YES]; return (interfaceOrientation == UIInterfaceOrientationPortrait); break; case SupportPortraitUpsideDownOrientation: [[UIApplication sharedApplication] setStatusBarHidden:NO animated:YES]; return (interfaceOrientation == UIInterfaceOrientationPortraitUpsideDown); break; case SupportPortraitAllOrientation: [[UIApplication sharedApplication] setStatusBarHidden:NO animated:YES]; return (interfaceOrientation == UIInterfaceOrientationPortrait || interfaceOrientation == UIInterfaceOrientationPortraitUpsideDown); break; case SupportLandscapeLeftOrientation: [[UIApplication sharedApplication] setStatusBarHidden:YES animated:YES]; return (interfaceOrientation == UIInterfaceOrientationLandscapeLeft); break; case SupportLandscapeRightOrienation: [[UIApplication sharedApplication] setStatusBarHidden:YES animated:YES]; return (interfaceOrientation == UIInterfaceOrientationLandscapeRight); break; case SupportLandscapeAllOrientation: [[UIApplication sharedApplication] setStatusBarHidden:YES animated:YES]; return (interfaceOrientation == UIInterfaceOrientationLandscapeLeft || interfaceOrientation == UIInterfaceOrientationLandscapeRight); break; case SupportAllOrientation: if (interfaceOrientation == UIInterfaceOrientationLandscapeLeft || interfaceOrientation == UIInterfaceOrientationLandscapeRight) { [[UIApplication sharedApplication] setStatusBarHidden:YES animated:YES]; }else { //[[UIApplication sharedApplication] setStatusBarHidden:NO animated:YES]; } return YES; break; default: return (interfaceOrientation == UIInterfaceOrientationPortrait); break; } } This block of code is part of my UINavigationController and is in a method that responds to the UIDeviceOrientationDidChangeNotification Notification. It is responsible for poping the customview and showing the tableview. There are two different versions in place that originally were for two different versions of the SDK but both are pretty close to solutions. The reason the first is not supported on 3.0 is for some reason you can't have a view showing and then showen as a modal view. Not sure if that is a bug or a feature. The second solution works pretty good except that I see an outer box rotating around the iphone. if ([[self topViewController] isKindOfClass:FlowViewController.class]) { NSString *iphoneVersion = [[UIDevice currentDevice] systemVersion]; double version = [iphoneVersion doubleValue]; if(version > 3.0){ //1st solution //if the delivered app is not built with the 3.1 SDK I don't think this will happen anyway //we need to test this [self presentModalViewController:self.flowViewController animated:NO]; //[self toInterfaceOrientation:UIDeviceOrientationPortrait animated:NO]; [self popViewControllerAnimated:NO]; [self setNavigationBarHidden:NO animated:NO]; [self dismissModalViewControllerAnimated:YES]; }else{ //2nd solution DLog(@"3.0!!"); //[self toInterfaceOrientation:UIDeviceOrientationPortrait animated:NO]; CATransition *transition = [CATransition animation]; transition.duration = 0.50; transition.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut]; transition.type = kCATransitionPush; transition.subtype = kCATransitionFade; CATransition *tabBarControllerLayer = [CATransition animation]; tabBarControllerLayer.duration = 0.50; tabBarControllerLayer.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut]; tabBarControllerLayer.type = kCATransitionPush; tabBarControllerLayer.subtype = kCATransitionFade; [self.tabBarController.view.layer addAnimation:transition forKey:kCATransition]; [self.view.layer addAnimation:transition forKey:kCATransition]; [self popViewControllerAnimated:NO]; [self setNavigationBarHidden:NO animated:NO]; } [self performSelector:@selector(resetFlow) withObject:nil afterDelay:0.75]; } I'm near convinced there is no solution except for manual rotation which messes up the keyboard rotation. Any advice would be appreciated! Thanks.

    Read the article

  • java.lang.UnsupportedClassVersionError: Bad version number in .class file?

    - by grmn.bob
    I am getting this error when I include an opensource library that I had to compile from source. Now, all the suggestions on the web indicate that the code was compiled in one version and executed in another version (new on old). However, I only have one version of JRE on my system. If I run the commands: $ javac -version javac 1.5.0_18 $ java -version java version "1.5.0_18" Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_18-b02) Java HotSpot(TM) Server VM (build 1.5.0_18-b02, mixed mode) and check in Eclipse for the properties of the java library, I get 1.5.0_18 Therefore, I have to conclude something else, internal to a class itself, is throwing the exception?? Is that even possible?

    Read the article

  • UIScrollview doesnt resize in NavigationController when rotated

    - by Icky
    Hey, I have been dealing with this issue for 2 days now, not able to find a solution. I have a navigationcontroller as a root view controller. This one pushes a UIViewcontroller which in turn has a UIScrollview I created with IB. Additionally there is the Navigation bar. My problem arises, when I rotate the IPhone to Landscape mode. In -(void) didRotateFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOrientation I want my scrollview to take up the full width (480 px) which it doesnt. I am able to set the frame of the navigation bar to full width perfectly fine, but not the scrollview. I have read that this might be because of the autoresizing masks set in the rooviewcontroller but I have tried out a couple of solutions - none worked for me. Any ideas on how to challenge the problem? Dont know where to start looking.

    Read the article

  • Problem with deploying simple Spring MVC Portlet to Liferay 5.2.3

    - by Johannes Hipp
    Hello, I try to deploy a simple spring portlet in ext (I can't use Plugins SDK...) on Liferay 5.2.3 My portlet: ext-impl/src: package: com.ext.portlet.springmvc HelloWorldController.java [code] package com.ext.portlet.springmvc; import java.io.IOException; import javax.servlet.ServletException; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import org.springframework.web.servlet.ModelAndView; import org.springframework.web.servlet.mvc.Controller; public class HelloWorldController implements Controller { public ModelAndView handleRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { String aMessage = "Hello World MVC!"; ModelAndView modelAndView = new ModelAndView("hello_world"); modelAndView.addObject("message", aMessage); return modelAndView; } } [/code] ext-lib: - jstr.jar - spring-webmvc.jar - spring-webmvc-portlet.jar - spring.jar - standard.jar ext-web/docroot/html/portlet/ext/springmvc/hello_world.jsp [code] <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <html> <body> <p>This is my message: ${message}</p> </body> </html> [/code] ext-web/docroot/html/portlet/ext/springmvc/index.jsp [code] <html> <body> <p>Hi</p> </body> </html> [/code] ext-web/docroot/WEB-INF/springmvc-servlet.xml [code] <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd"> <bean name="/hello_world.html" class="com.ext.portlet.springmvc.HelloWorldController"/> <bean id="viewResolver" class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView"/> <property name="prefix" value="/jsp/"/> <property name="suffix" value=".jsp"/> </bean> </beans> [/code] ext-web/docroot/WEB-INF/portlet-ext.xml [code] <portlet> <portlet-name>springmvc</portlet-name> <portlet-class>org.springframework.web.portlet.DispatcherPortlet</portlet-class> <supports> <mime-type>text/html</mime-type> <portlet-mode>view</portlet-mode> </supports> <portlet-info> <title>Simple JSP Portlet</title> </portlet-info> <security-role-ref> <role-name>power-user</role-name> </security-role-ref> <security-role-ref> <role-name>user</role-name> </security-role-ref> </portlet> [/code] ext-web/docroot/WEB-INF/web.xml [code] <?xml version="1.0"?> <web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4"> <servlet> <servlet-name>springmvc</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>springmvc</servlet-name> <url-pattern>*.html</url-pattern> </servlet-mapping> <welcome-file-list> <welcome-file> jsp/index.jsp </welcome-file> </welcome-file-list> </web-app> [/code] Are there some mistakes? I get this error, when I try to deploy: [code] Website OC4J 10g (10.1.3) Default Web Site definiert ist. Error creating bean w ith name 'com.liferay.portal.kernel.captcha.CaptchaUtil' defined in class path r esource [META-INF/util-spring.xml]: Cannot create inner bean 'com.liferay.portal .captcha.CaptchaImpl#1424b7b' of type [com.liferay.portal.captcha.CaptchaImpl] w hile setting bean property 'captcha'; nested exception is org.springframework.be ans.factory.BeanCreationException: Error creating bean with name 'com.liferay.po rtal.captcha.CaptchaImpl#1424b7b' defined in class path resource [META-INF/util- spring.xml]: Instantiation of bean failed; nested exception is org.springframewo rk.beans.BeanInstantiationException: Could not instantiate bean class [com.lifer ay.portal.captcha.CaptchaImpl]: Constructor threw exception; nested exception is java.lang.NullPointerException [/code] Hope anybody can help me... Thank you very much. Best regards, Johannes

    Read the article

  • ASP.NET ReportViewer Google Chrome CPU usage

    - by Phil
    Hello, We have found an interesting issue between ASP.NET 3.5 and ReportViewer with Google Chrome. Our set of pages work fine until a ReportViewer control displays a report. Google Chrome then eats up 50% of the CPU doing nothing it seems. I've extracted the ReportViewer control to a blank Web Forms project to confirm its that control and not a rogue bit of my code. I'm using ReportViewer in local mode (RDLC file) so I presume its the 2005 version? Anyone seen this before and have a solution? Phil Edit: Google Chrome 3.0.195.33 on Vista Business x64 Edit 2: Added bounty for help fixing this

    Read the article

  • WCF: SecurityNegotiationException when using client

    - by bradhe
    So I've been trying to set up certificate authentication for my clients and services. The eventual goal is to partition data based on the certificate a client connects with (i.e. the certificate becomes their credentials in to the greater system and their data is partitioned based on these credentials). I have been able to set it up successfully on both the client and the server side. I have created a certificate and a private key, installed them on my computer, and set up my server such that 1) it has a certificate-based service credential and 2) if a client connects without providing a certificate-based credential an exception is thrown. What I then did was create a simple client and add a certificate credential to the configuration and try to call a simple operation on the service. It looks like the client connects OK, and it looks like the certificate is accepted by the server, but I do get this: SecurityNegotiationException: "The caller was not authenticated by the service." That seems rather ambiguous to me. Note that I am using wsHttpBinding, which supposedly defaults to Windows auth for transport security...but all of these processes are being run as my user account as I'm running in my debug environment. Here is my server configuration: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="MyServiceBinding"> <security mode="Message"> <transport clientCredentialType="None"/> <message clientCredentialType="Certificate"/> </security> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="MyServiceBehavior" name="MyService"> <endpoint binding="wsHttpBinding" bindingConfiguration="MyServiceBinding" contract="IMyContract"/> <endpoint binding="mexHttpBinding" address="mex" contract="IMetadataExchange"> <identity> <dns value="localhost"/> </identity> </endpoint> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MyServiceBehavior"> <serviceMetadata httpGetEnabled="true" policyVersion="Policy15" /> <serviceDebug includeExceptionDetailInFaults="false" /> <serviceCredentials> <serviceCertificate storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName" findValue="tmp123"/> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> Here is my client config -- note that I'm using the same cert for the client that I use on the service: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IMyService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384"/> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/> <security mode="Message"> <!--<transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/>--> <message clientCredentialType="Certificate" negotiateServiceCredential="true" algorithmSuite="Default"/> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://localhost:50120/UserServices.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IMyService" behaviorConfiguration="IMyService_Behavior" contract="UserServices.IUserServices" name="WSHttpBinding_IMyService"> <identity> <certificate encodedValue="Some RSA stuff"/> </identity> </endpoint> </client> <behaviors> <endpointBehaviors> <behavior name="IMyService_Behavior"> <clientCredentials> <clientCertificate storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName" findValue="tmp123"/> </clientCredentials> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> Can anyone please help provide some insight as to what might be up here? Thanks,

    Read the article

  • SharpSVN and C# Problem

    - by Sam F
    When trying to add SharpSVN to my C# project, compiling with SharpSVN related calls gives me this error: FileLoadException was Unhandled Mixed mode assembly is built against version 'v2.0.50727' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information. What I did was add the References from the downloaded SharpSVN zip file and added the using SharpSvn; When I compile that it works fine, but when I add: string targetPath = "https://bobl/svn/ConsoleApplication1"; SvnTarget target; SvnTarget.TryParse(targetPath, out target); It breaks with that error. I've searched this error and have had no luck in finding a solution.

    Read the article

  • Access Internet From My Blackberry App

    - by Ankit
    Hi all, This is my first attemp to code a blackberry app so please bear with me. I am developing an app to make it easy to access certain information from certain websites using screenscrapping. Now I am done with the ui part of the application onto the internet access part. My question is how do i access internet from my app ? I see that blackberry offers http, wifi and some other forms to access the internet ... does my app need to be worried about what mode is being used ? or as far as my app is concerned theres a general api to access the net with the logic of connecting to the internet being handled by the device itself ..? any pointers with some sample code would be much appreciated. thank you, ankit

    Read the article

  • Disk is spinning down each minute, unable to disable it

    - by lzap
    I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

    Read the article

  • XAML Parsing Exception

    - by e28Makaveli
    I have a simple XAML page that load fine when it is loaded as part of any application within Visual Studio. However, when I deploy this application using ClickOnce, I get the following exception: Type : System.Windows.Markup.XamlParseException, PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 Message : Unable to cast object of type 'System.Windows.Controls.Grid' to type 'EMS.Controls.Dictionary.StatusBarControl'. Error at object 'System.Windows.Controls.Grid' in markup file 'EMS.Controls.Dictionary;component/views/statusbarcontrol.xaml'. Source : PresentationFramework Help link : LineNumber : 0 LinePosition : 0 KeyContext : UidContext : NameContext : BaseUri : pack://application:,,,/EMS.Controls.Dictionary;component/views/statusbarcontrol.xaml Data : System.Collections.ListDictionaryInternal TargetSite : Void ThrowException(System.String, System.Exception, Int32, Int32, System.Uri, System.Windows.Markup.XamlObjectIds, System.Windows.Markup.XamlObjectIds, System.Type) Stack Trace : at System.Windows.Markup.XamlParseException.ThrowException(String message, Exception innerException, Int32 lineNumber, Int32 linePosition, Uri baseUri, XamlObjectIds currentXamlObjectIds, XamlObjectIds contextXamlObjectIds, Type objectType) at System.Windows.Markup.XamlParseException.ThrowException(ParserContext parserContext, Int32 lineNumber, Int32 linePosition, String message, Exception innerException) at System.Windows.Markup.BamlRecordReader.ReadRecord(BamlRecord bamlRecord) at System.Windows.Markup.BamlRecordReader.Read(Boolean singleRecord) at System.Windows.Markup.TreeBuilderBamlTranslator.ParseFragment() at System.Windows.Markup.TreeBuilder.Parse() at System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream) at System.Windows.Application.LoadComponent(Object component, Uri resourceLocator) at EMS.Controls.Dictionary.StatusBarControl.InitializeComponent() at EMS.Controls.Dictionary.StatusBarControl..ctor(IDataView content) at OCC600.ReportManager.ReportPresenter.ShowQueryView(Object arg, Boolean bringForward, Type selectedDataType) at OCC600.ReportManager.ReportPresenter..ctor(IUnityContainer container) at OCC600.ReportManager.Module.Initialize() at Microsoft.Practices.Composite.Modularity.ModuleLoader.Initialize(ModuleInfo[] moduleInfos) Inner Exception --------------- Type : System.InvalidCastException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Message : Unable to cast object of type 'System.Windows.Controls.Grid' to type 'EMS.Controls.Dictionary.StatusBarControl'. Source : EMS.Controls.Dictionary Help link : Data : System.Collections.ListDictionaryInternal TargetSite : Void System.Windows.Markup.IComponentConnector.Connect(Int32, System.Object) Stack Trace : at EMS.Controls.Dictionary.StatusBarControl.System.Windows.Markup.IComponentConnector.Connect(Int32 connectionId, Object target) at System.Windows.Markup.BamlRecordReader.ReadConnectionId(BamlConnectionIdRecord bamlConnectionIdRecord) at System.Windows.Markup.BamlRecordReader.ReadRecord(BamlRecord bamlRecord) The XAML page is given below: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:cdic="clr-namespace:EMS.Controls.Dictionary.Primitives" xmlns:dicutil="clr-namespace:OCC600.Infrastructure.Dictionary.Utility;assembly=EMS.Infrastructure.Dictionary" Loaded="ResultSetControl_Loaded" <StatusBarItem Margin="10,0, 10, 0"> <TextBlock Text="{Binding CountText}" Padding="5,0"/> </StatusBarItem> <StatusBarItem Margin="10,0"> <TextBlock Text="{Binding MemoryUsageText}" Padding="5,0"/> </StatusBarItem> <StatusBarItem Margin="10,0" MaxWidth="400"> <TextBlock Text="{Binding StatusReport.Summary}" Padding="5,0" /> </StatusBarItem> <ProgressBar Margin="20,0" Name="progBar" Width="150" Height="13" Visibility="Collapsed" > <ProgressBar.ContextMenu> <ContextMenu Name="ctxMenu" ItemsSource="{Binding ActiveWorkItems}" Visibility="{Binding Path=ActiveWorkItems.HasItems, Converter={StaticResource BooToVisConv}}"> <ContextMenu.ItemContainerStyle> <Style TargetType="{x:Type MenuItem}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type MenuItem}"> <StackPanel Height="20" Margin="10,0" Orientation="Horizontal" HorizontalAlignment="Left"> <TextBlock Text="{Binding Path=Name, Mode=OneTime}" Foreground="Black" VerticalAlignment="Center" HorizontalAlignment="Left" /> <ToggleButton Style="{StaticResource vistaGoldenToggleButtonStyle}" Padding="5,0" Content="Cancel" IsChecked="{Binding Cancel}" Margin="10,0,0,0" > </ToggleButton> </StackPanel> </ControlTemplate> </Setter.Value> </Setter> </Style> </ContextMenu.ItemContainerStyle> </ContextMenu> </ProgressBar.ContextMenu> </ProgressBar> <StatusBarItem Margin="10,0" MaxWidth="400" HorizontalAlignment="Right"> <StackPanel Orientation="Horizontal"> <TextBlock Text="Last Update:" Padding="5,0" /> <TextBlock Text="{Binding TimeStamp}" Padding="5,0" /> </StackPanel> </StatusBarItem> <!-- TODO: Put checkmark if all is well, or error if connection failed--> <StatusBarItem Style="{DynamicResource {ComponentResourceKey TypeInTargetAssembly=dc:Ribbon, ResourceId=StatusBarItemAlt}}" DockPanel.Dock="Right" Padding="6,0,32,0" > <cdic:SplitButton Margin="5,0" Padding="5,2" Style="{DynamicResource {ComponentResourceKey TypeInTargetAssembly={x:Type cdic:SplitButtonResources}, ResourceId=vistaSplitButtonStyle}}" Mode="Split"> <cdic:SplitButton.ContextMenu> <ContextMenu > <MenuItem Header="Refresh Now" Command="{Binding ToggleConnectivityCmd}" CommandParameter="false"/> <MenuItem IsCheckable="True" IsChecked="{Binding ConnectState, Converter={StaticResource isFailedConverter}}" CommandParameter="{Binding RelativeSource={x:Static RelativeSource.Self}, Path=IsChecked}" Header="Work Offline" Command="{Binding ToggleConnectivityCmd}"/> </ContextMenu> </cdic:SplitButton.ContextMenu> <cdic:SplitButton.Content> <StackPanel Orientation="Horizontal"> <Image x:Name="img" Source="{Binding ConnectState, Converter={StaticResource imageConverter}}" Width="16" Height="16" HorizontalAlignment="Center" VerticalAlignment="Center"/> <TextBlock Text="{Binding ConnectState}" Padding="3,0,0,0"/> </StackPanel> </cdic:SplitButton.Content> </cdic:SplitButton> </StatusBarItem> </StatusBar> </Grid> The error just seems to have come out of no where. Any ideas? TIA.

    Read the article

  • JPA Entity (in multiple persistence-unit) in OSGi (Spring DM) Environnement is confusing me.

    - by Vincent Demeester
    Hi, I'm a bit confused about a strange behavior of my JPA's related objects. I have three bundle : The User bundle does contain some user-related objects, but mainly the User object. The Energy bundle does contain some energy-related objects, and particularly a ConsumptionTerminal which contains a List of User. The Index bundle does contain an Index object that has no dependency at all. My OSGi environment is the following : A DataSource bundle that provide 2 services : dataSource and jpaVendorAdapter. The three bundles. They consume dataSource and jpaVendorAdapter. Their module-context.xml file look like : And they all have a persistence.xml file : User <?xml version="1.0" encoding="UTF-8"?> <persistence> <persistence-unit name="securityPU" transaction-type="JTA"> <jta-data-source>java:/securityDataSourceService</jta-data-source> <class>net.nextep.amundsen.security.domain.User</class> <!-- [...] --> <exclude-unlisted-classes>true</exclude-unlisted-classes> <properties> <property name="eclipselink.logging.level" value="INFO" /> <property name="eclipselink.ddl-generation" value="create-tables" /> <property name="eclipselink.ddl-generation.output-mode" value="database" /> <property name="eclipselink.orm.throw.exceptions" value="true" /> </properties> </persistence-unit> </persistence> Energy <?xml version="1.0" encoding="UTF-8"?> <persistence> <persistence-unit name="energyPU" transaction-type="JTA"> <jta-data-source>java:/securityDataSourceService</jta-data-source> <class>net.nextep.amundsen.security.domain.User</class> <class>net.nextep.amundsen.energy.domain.User</class> <!-- [...] --> <exclude-unlisted-classes>true</exclude-unlisted-classes> <properties> <property name="eclipselink.logging.level" value="INFO" /> <property name="eclipselink.ddl-generation" value="create-tables" /> <property name="eclipselink.ddl-generation.output-mode" value="database" /> <property name="eclipselink.orm.throw.exceptions" value="true" /> </properties> </persistence-unit> </persistence> Index : This one has the most simple persistence.xml with just the Index class (no shared Class). I'm using named @PersistenceUnit annotation like @PersitenceUnit(name = 'securityPU') (for the User bundle). And finally, I'm using EclipseLink as Jpa provider and Spring DM (+ Spring DM Server in the development process) The problem is the following : When the User bundle is deployed, I'm able to persist User objects. When the User bundle and Energy bundles are both deployed, I'm not able to persist User objects (neither the Energy object). But I don't have any exception at all ! There is no problem at all with the Index bundle. The bug is dataSource independent (I tried with PostgreSQL and MySQL so far). My first conclusion was that the <class>net.nextep.amundsen.security.domain.User</class> in both persistence unit was causing the trouble. I tried without it (and hiding the User dependent object in the Energy bundle) but it failed too. I'm a bit confused about that bug. I'm also not quite sure about the transaction management in this context. I wasn't the one who designed this architecture (but I tell my intern OK without testing it.. shame on me) but if I could understand this bug and maybe fix it without rewrite the bundle (and break my intern work), I would appreciate. Am I doing something wrong ? (it's obvious, but what..) Did I miss something while reading documentation ? By the way, I'm also looking for some best practices or advices when it comes to JPA, EclipseLink (or whatever JPA Provider) and Spring DM (and OSGi in general). I found interesting slides from Mike Keith about this topic (by browsing Stackoverflow).

    Read the article

  • Multiple Operations with soapAction="" in a WCF Service Contract?

    - by John Saunders
    I need to create a service that will be "called back" by a third party. As a result, I need to conform to their WSDL. Their WSDL has all of the operations defined with soapAction="", so my service needs to do the same. Unfortunately, I'm getting the error: The operations A and B have the same action (). Every operation must have a unique action value. In ASMX web services, there was a mode where the soapAction would not be used, but the name of the request element would be used instead. Is there some way using WCF not only to dispatch on the request element, but also to emit a WSDL with no soapAction?

    Read the article

  • Hide ticks at Min and Max in WPF Slider

    - by gehho
    Hi, I want to display a Slider ranging from 0.5 to 1.5 with only one tick mark at 1.0 to mark the center and default value. I have defined a Slider as follows: <Slider Minimum="0.5" Maximum="1.5" IsMoveToPointEnabled="True" IsSnapToTickEnabled="False" Orientation="Horizontal" Ticks="1.0" TickPlacement="BottomRight" Value="{Binding SomeProperty, Mode=TwoWay}"/> However, besides a tick mark at 0.0 this Slider also shows tick marks at 0.5 and 1.5, i.e. the Minimum and Maximum values. Is there a way to hide these min/max tick marks?! I checked all properties and tried changing some of them, but did not have success so far. Thanks, gehho.

    Read the article

  • What exactly is the "Multi-threaded Debug DLL" Runtime Library option doing in VS 2008?

    - by GregH
    I have a solution in VS 2008 that creates a DLL. I then use that DLL in another application. If I go in to the DLL projects property pages and change the following configuration for a DEBUG build then the built dll no long provides the desired functionality. If I change it back and rebuild the DLL, then the DLL does provide the correct functionality: Property Pages = Configuration Properties = C/C++ = Code Generation = Runtime Library If set to "Multi-threaded Debug DLL (/MDd)" then everything works as it should. I get the correct functionality from the DLL If set to "Multi-threaded DLL (/MD)" then the DLL does not function properly...no runtime errors or anything, it just doesn't work (The DLL is supposed to plot some lines on a map but does not in this mode). So the question is, why does using the /MDd flag result in correction functionality of the underlying code, while /MD results in incorrect functionality? A little background...somebody else developed the DLL in C++ and I am using this DLL in a VB.net application.

    Read the article

  • VBScript & Access MDB - 800A0E7A - "Provider cannot be found. It may not be properly installed"

    - by Perma
    Hey gang, I've having a problem with a VBScript connecting to an access MDB Database. My platform is Vista64, but the majority of resources out there are for ASP/IIS7. Quite simply, I can't get it to connect. I'm getting the following error: 800A0E7A - "Provider cannot be found. It may not be properly installed" My code is: Set conn = CreateObject("ADODB.Connection") strConnect = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\database.MDB" conn.Open strConnect So far I have ran %WINDIR%\System32\odbcad32.exe to try to configure the Driver in 32bit mode, but it hasn't done the trick. Any suggestions would be greatly appreciated

    Read the article

  • how to prevent MPMoviePlayer controls from hiding

    - by huevos de oro
    I am trying to implement a custom MPMoviePlayer to play mp3 audio. I have got it working in portrait mode along with an overlay window over the native controls - thanks to other stackoverflow posts. The current issue is the song progress control shows up when the media window opens (blue bar taking up the first 40 odd pixels), but seems to disappear when the song starts leaving a white bar. It will then re-appear when touching the area, so functionally works fine. I would like to find a way to ensure the controls always stay visible but have not found an appropriate property in the reference. Ideally I would like to have my custom control to replace the default, more because I would like to change the position that the look and feel. This being said, I understand it is not possible as the current position in the song from a MPMoviePlayer cannot be accessed.

    Read the article

  • Problem in Eclipse 3.5 and ubuntu 9.10

    - by ki0
    Someone knows why eclipse close when i click any button. This is because when i try to do something, update eclipse or whatever, eclipse close and it gives me this log... # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007fc329864f7a, pid=9392, tid=140476827293968 # # JRE version: 6.0_16-b01 # Java VM: Java HotSpot(TM) 64-Bit Server VM (14.2-b01 mixed mode linux-amd64 ) # Problematic frame: # C [libpango-1.0.so.0+0x24f7a] pango_layout_new+0x2a # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # I think it is something about java, anyone has any solution?¿ Thanks

    Read the article

  • Rails - MS-SQL Server problems (unixODBC, FreeTDS) on Mac 10.6

    - by TMB
    Followed the instructions on the Rails wiki and have had success connecting to SQL Server 2000 with TSQL -- both with DSN-less and DNS connections. I'm running Mac OS X 10.6.3. Wiki instructions here. Installed ruby-odbc, dbi (0.4.0), dbd-odbc (2.4.5), activerecord-sqlserver-adapter (2.3.5). In my database.yml (Rails 2.3.6): development: adapter: sqlserver mode: ODBC dsn: 'DRIVER=/usr/local/lib/libtdsodbc.so;TDS_Version=8.0;SERVER=mssql01.discountasp.net;DATABASE=DB_164368_dmusd;Port=1433;uid=DB_164368_dmusd_user;pwd=Schools77;' This yields the following error: ODBC::Error: S1090 (0) [unixODBC][Driver Manager]Invalid string or buffer length When I attempt to use a DSN connection, I get the following error: ODBC::Error: IM002 (0) [unixODBC][Driver Manager]Data source name not found, and no default driver specified I have in fact verified that the FreeTDS driver (libtdsodbc.so) is installed and the path correct. Can anyone spot the error of my ways? Thanks in advance.

    Read the article

  • itunes connect rejection: "The binary you uploaded was invalid. A pre-release beta version of the SD

    - by Adam
    I'm having trouble submitting apps on Apple's app store. I was using a beta version of xcode- 3.2.3/iphone sdk 4.0- and I assumed that if I set the base sdk and deployment target to an acceptable version it would work, but it didn't. I deleted the beta version of xcode/sdk using "sudo /Developer/Library/uninstall-devtools --mode=all" and did a fresh install of the old release version- xcode 3.2.2/iphone sdk 3.2- but I still have the same problem. Has anyone run into this before? Is there something left over from the beta version that could still be hanging around causing problems?

    Read the article

  • COM Add-in for Excel doesn't load when Excel is launched by opening file

    - by Nick Hebb
    Several users have reported that if they launch Excel by double-clicking an Excel file, the add-in will not load. But, if they open Excel via the Start menu (or Quick launch toolbar) the add-in loads fine. Some details, in case they help: It is a COM add-in, written in VB6. The problem has been reported on Windows XP/Excel 2003 and Vista/Excel 2007 systems. The add-in implements IDTExtensibility2. The start mode is set to "Load on Startup". Any thoughts on the cause or how to troubleshoot this would be greatly appreciated.

    Read the article

  • Ubuntu/Windows suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • changing selenium domain/subdomain within cucumber scenarios

    - by dalyons
    So, I have a Rails webapp that utilizes subdomains for separating the admin functionality from the public functionality using subdomain-fu. So there is functionality(that I want to test!) contained within two urls(eg admin.example.com and www.example.com). I want some scenarios to run against the admin domain, and some against the www domain. My problem is that I cant figure out how to change the domain that selenium uses at any time after startup. I can put something like this in my env.rb: Webrat.configure do |config| config.mode = :selenium config.application_address = "admin.example.com" end And it will work, but only for the scenarios that need the admin domain. If I try something like: host! "www.example.com" inside my steps, well it seems to just be ignored by selenium, which goes on using "admin.example.com" Any ideas? Or if its not possible, any ideas for a workaround?

    Read the article

  • Is Visual Studio 2010 WebDev WebServer (Cassini) 64-bit compatible?

    - by David
    I'm now developing on Visual Studio 2008 on a 64-bit OS (Windows Server 2008 64-bit). While the apps I write are 64-bit capable, as is IIS7, the built-in ASP.NET Development Server (aka Cassini aka WebDev.Webserver.exe) runs as 32-bit. This brings up a plethora of issues, such as: 32-bit and 64-bit applications have separate HKLM\Software registry homes There are 32-bit and 64-bit versions of the SQL Server Client Network Utility Other fun surprises I haven't discovered but I'm sure will spring up While I am finding workarounds for most of this, I have to ask... Does anyone who has played with the Visual Studio 2010 preview bits on 64-bit architecture know if the development web servers can handle 64-bit, and if so, are there options for which mode to run it in? (Like a checkbox in the project properties, for instance)

    Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >