Search Results

Search found 10466 results on 419 pages for 'restart explorer'.

Page 365/419 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

• No HDMI Audio with GeForce 9600GT and nForce board

  - by Bobby

  I've been trying to get HDMI with sound working for the last few days, and I'm a little bit out of ideas. (I've verified that the hardware/Setup works via Windows.) aplay does not list my HDMI device: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 I've already compiled the alsa drivers (1.0.24) from a snapshot (with --with-oss=no) and added the line options snd-hda-intel model=auto # Tried 3stack-dig and 6stack-dig too to /etc/modprobe.d/alsa-base.conf. Still, the device does not show up. If it is important, the HDMI TV is at the moment not configured to be part of the X session (I've tried that to, at least with X restart, and it didn't change anything). What did I miss? $ lspci 00:00.0 Host bridge: nVidia Corporation Device 07c3 (rev a2) 00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2) 00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2) 00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1) 00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1) 00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1) 00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1) 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1) 00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP73 IDE (rev a2) 00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2) 02:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)   $ aplay -L default pulse Playback/recording through the PulseAudio sound server front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions

  Read the article

• Uncovering Compiler Errors in ASP.NET MVC Views

  - by Ben Griswold

  ASPX and ASCX files are compiled on the fly when they are requested on the web server. This means it’s possible that you aren’t catching compile errors associated with your views when you build your ASP.NET MVC project in Visual Studio.  Unless you’re willing to click through your entire application, rendering each view looking for errors, you application is left a little vulnerable to user issues.  Fortunately, there’s a work around.  Open up your MVC project file in notepad or within the Visual Studio IDE by unloading the project and then editing the .csproj file (both actions are available by right-clicking on the Project Node in Solution Explorer.)  Notice the MvcBuildViews option.  It’s probably set to false.  Flip the value to true and you’ll magically start compiling your views when you build your application. <MvcBuildViews>false</MvcBuildViews> Taking this action will slow down your builds a bit, but if you’re a hack like me, it’ll probably save your day in the long run. Now you’re probably thinking, “Neat trick – how’s it work?”  Scroll down toward the bottom of your csproj file and you will notice the AfterBuild target triggers the AspNetCompiler action if the MvcBuildViews option is set to true.  <Target Name="AfterBuild" Condition="'$(MvcBuildViews)'=='true'">   <AspNetCompiler VirtualPath="temp"                   PhysicalPath="$(ProjectDir)\..\$(ProjectName)" /> </Target> Great. One more thing. Let’s say you don’t want to slow down all of your builds, but you absolutely want to know if there are any compiler issues with your views before you commit your code to version control or deploy or whatever.  Here’s what you can do – change the AfterBuild condition to run if your configuration is set to Release mode.  <Target Name="AfterBuild" Condition="'$(Configuration)'=='Release'">   <!– Always pre-compile ASPX and ASCX in release mode –>   <AspNetCompiler VirtualPath="temp"                   PhysicalPath="$(ProjectDir)\..\$(ProjectName)" /> </Target> Now your debug mode builds will continue to be as fast as ever and you can quickly validate your views by building in release mode when you so choose.  There’s one little catch – this setup won’t consider the MvcBuildViews option whatsoever! So if you decide to go with this configuration, you might want to add a comment near the MvcBuildViews option letting other developers know they can change the MvcBuildViews option as much as they’d like but it’s not going to affect the AfterBuild action.  Or don’t include the comment and let your team members figure it out for themselves…

  Read the article

• How To Clear An Alert - Part 2

  - by werner.de.gruyter

  There were some interesting comments and remarks on the original posting, so I decided to do a follow-up and address some of the issues that got raised... Handling Metric Errors First of all, there is a significant difference between an 'error' and an 'alert'. An 'alert' is the violation of a condition (a threshold) specified for a given metric. That means that the Agent is collecting and gathering the data for the metric, but there is a situation that requires the attention of an administrator. An 'error' on the other hand however, is a failure to collect metric data: The Agent is throwing the error because it cannot determine the value for the metric Whereas the 'alert' guarantees continuity of the metric data, an 'error' signals a big unknown. And the unknown aspect of all this is what makes an error a lot more serious than a regular alert: If you don't know what the current state of affairs is, there could be some serious issues brewing that nobody is aware of... The life-cycle of a Metric Error Clearing a metric error is pretty much the same workflow as a metric 'alert': The Agent signals the error after it failed to execute the metric The error is uploaded to the OMS/repository, where it becomes visible in the Console The error will remain active until the Agent is able to execute the metric successfully. Even though the metric is still getting scheduled and executed on a regular basis, the error will remain outstanding as long as the Agent is not capable of executing the metric correctly Knowing this, the way to fix the metric error should be obvious: Take the 'problem' away, and as soon as the metric is executed again (based on the frequency of the metric), the error will go away. The same tricks used to clear alerts can be used here too: Wait for the next scheduled execution. For those metrics that are executed regularly (like every 15 minutes or so), it's just a matter of waiting those minutes to see the updates. The 'Reevaluate Alert' button can be used to force a re-execution of the metric. In case a metric is executed once a day, this will be a better way to make sure that the underlying problem has been solved. And if it has been, the metric error will be removed, and the regular data points will be uploaded to the repository. And just in case you have to 'force' the issue a little: If you disable and re-enable a metric, it will get re-scheduled. And that means a new metric execution, and an update of the (hopefully) fixed problem. Database server-generated alerts and problem checkers There are various ways the Agent can collect metric data: Via a script or a SQL statement, reading a log file, getting a value from an SNMP OID or listening for SNMP traps or via the DBMS_SERVER_ALERTS mechanism of an Oracle database. For those alert which are generated by the database (like tablespace metrics for 10g and above databases), the Agent just 'waits' for the database to report any new findings. If the Agent has lost the current state of the server-side metrics (due to an incomplete recovery after a disaster, or after an improper use of the 'emctl clearstate' command), the Agent might be still aware of an alert that the database no longer has (or vice versa). The same goes for 'problem checker' alerts: Those metrics that only report data if there is a problem (like the 'invalid objects' metric) will also have a problem if the Agent state has been tampered with (again, the incomplete recovery, and after improper use of 'emctl clearstate' are the two main causes for this). The best way to deal with these kinds of mismatches, is to simple disable and re-enable the metric again: The disabling will clear the state of the metric, and the re-enabling will force a re-execution of the metric, so the new and updated results can get uploaded to the repository. Starting 10gR5, the Agent performs additional checks and verifications after each restart of the Agent and/or each state change of the database (shutdown/startup or failover in case of DataGuard) to catch these kinds of mismatches.

  Read the article

• How to Browse Without a Trace with an Ubuntu Live CD

  - by Trevor Bekolay

  No matter how diligently you clear your cache and erase your history, web browsing leaves traces on your computer. If you need keep your browsing private, then an Ubuntu Live CD is the answer. The key to this trick is that the Live CD environment runs completely in RAM, so things like your cache, cookies, and history don’t get saved to a persistent storage location. On a hard drive, even deleted files can be recovered, but once a computer is turned off the data stored in RAM is unrecoverable. In addition, since the Ubuntu Live CD environment is the same no matter what computer you use it on, there’s very little identifying information that a website can use to track you! The first step is to either burn an Ubuntu Live CD, or prepare a non-persistent Ubuntu USB flash drive. Ubuntu treats non-persistent flash drives like CDs, so files will not be written to it, but if you’re paranoid, then using a physical CD ensures that nothing gets written to a storage device. Boot up from the CD or flash drive, and choose to Run Ubuntu from the CD or flash drive if prompted (for more detailed instructions on booting from a CD or USB drive, see this article, or our guide on booting from a flash drive even if your BIOS won’t let you). Once the graphical Ubuntu environment comes up, you can click on the Firefox icon at the top of the screen to start browsing. If your browsing requires Flash, then you can install it by clicking on System at the top-left of the screen, then Administration > Synaptic Package Manager. Click on Settings at the top of the Synaptic window, and then select Repositories. Add a check in the checkbox with the label ending in “multiverse”. Click Close. Click the Reload button in the main Synaptic window. The list of available packages will reload. When they’ve reloaded, type “restricted” in the Quick search box. Right-click on ubuntu-restricted-extras and select Mark for Installation. It will note a number of other packages that will be installed. This list includes audio and video codecs, so after installing these, you should be able to play downloaded movies and songs. Click Mark to accept the installation of these other packages. Once you return to the main Synaptic window, click the Apply button and go through the dialogs to finish the installation of Flash and the other useful packages. If you open up Firefox now, you’ll have no problems using websites that use Flash. When you’re done browsing and shut down or restart your computer, all traces of your web browsing will be gone. It’s a bit of work compared to just using a privacy-centric browser, but if it’s very important that your browsing leave no traces on your hard drive, an Ubuntu Live CD is your best bet. Download Ubuntu Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDAdding extra Repositories on UbuntuHow to Add a Program to the Ubuntu Startup List (After Login)How to install Spotify in Ubuntu 9.10 using WineInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• Java Script – Content delivery networks (CDN) can bit you in the butt.

  - by Ryan Ternier

  As much as I love the new CDN’s that Google, Microsoft and a few others have publically released, there are some strong gotchas that could come up and bite you in the ass if you’re not careful. But before we jump into that, for those that are not 100% sure what a CDN is (besides Canadian).   Content Delivery Network. A way of distributing your static content across various servers in different physical locations.  Because this static content is stored on many servers around the world, whenever a user needs to access this content, they are given the closest server to their location for this data. Already you can probably see the immediate bonuses to a system like this: Lower bandwidth Even small script files downloaded thousands of times will start to take a noticeable hit on your bandwidth meter. Less connections/hits to your web server which gives better latency If you manage many servers, you don’t need to manually update each server with scripts. A user will download a script for each website they visit. If a user is redirected to many domains/sub-domains within your web site, they might download many copies of the same file. When a system sees multiple requests from the same  domain, they will ignore the download   Those are just a handful of the many bonuses a CDN will give you. And for the average website, a CDN is great choice. Check out the following CDN links for their solutions: Google AJAX Library: http://code.google.com/apis/ajaxlibs/ Microsoft Ajax library: http://www.asp.net/ajaxlibrary/cdn.ashx The Gotcha There is always a catch. Here are some issues I found with using CDN’s that hopefully can help you make your decision. HTTP / HTTPS If you are running a website behind SSL, make sure that when you reference your CDN data that you use https:// vs. http://. If you forget this users will get a very nice message telling them that their secure connection is trying to access unsecure data. For a developer this is fairly simple, but general users will get a bit anxious when seeing this. Trusted Sites Internet Explorer has this really nifty feature that allows users to specify what sites they trust, and by some defaults IE7 only allows trusted sites to be viewed.  No problem, they set your website as trusted. But what about your CDN? If a user sets your websites to trusted, but not the CDN, they will not download those static files. This has the potential to totally break your web site. Pedantic Network Admins This alone is sometimes the killer of projects. However, always be careful when you are going to use a CDN for a professional project. If a network / security admin sees that you’re referencing an outside source, or that a call from a website might hit an outside domain.. panties will be bunched, emails will be spewed out and well, no one wants that.

  Read the article

• HTML Presence Controls for Communications Server 14 CodePlex Project

  Showing Presence on the Web If youre running Office Communicator Server 2007 R2, you know that your only out-of-the-box option for showing presence on the web is to use the NameControl ActiveX control that ships as part of Office.  Being an ActiveX control, this obviously means that youre limited to Internet Explorer.  Also, nobody likes ActiveX controls What if you want to show the presence of users in a pure ASP.NET or HTML application and cant assume that the user has Communicator installed you need anASP.NET or HTML presence control.  HTML Presence Controls for Microsoft Communications Server 14 We recently worked with the UC team at Microsoft on a keynote demo for TechEd 2010 in New Orleans.  The demo was for a fictitious airline Fabrikam Airlines that wanted to show the presence of customer service and reservations agents on its website.  Customers could also start an instant message conversation with the agents using a Silverlight web chat window that used WCF to communicate with the backend UCMA application. We built HTML Presence Controls that use AJAX to poll a REST-based WCF service running in IIS and hosting a UCMA 3.0 presence subscription application.   Microsoft has graciously allowed us to publish these on CodePlex so that the development community can benefit from them:  http://htmlpresencecontrols.codeplex.com/ We will be maintaining the CodePlex project as new builds of UCMA 3.0 become available.  Check out the project home page on CodePlex for some more in-depth details on how the controls are implemented. ASP.NET Server Control Implementation Were providing an ASP.NET Server Control implementation that you can use stand-alone or in a GridView or Repeater (or other layout control).  The control has properties that allow you to control its appearance, e.g. you can choose whether or not to show the contacts name or availability text. You can also use the server control in a layout control such as a GridView by putting it in a TemplateColumn and binding to the Sip Uri in the data source. Disclaimer Once we started working on these, we realized why Microsoft hasnt shipped such controls as part of the product.  There are some tradeoffs you have to be aware of when using these controls, heres the high level. Privacy The backend UCMA 3.0 application that subscribes to presence of contacts runs as a trusted application and can thus retrieve the presence of any user in the organization.  Theres currently no good way in UCMA to apply any privacy rules to ensure that the consumer of the presence controls has permission to see the presence of the contacts that the controls are bound to.  Just to be absolutely crystal clear These controls provide a way to query the presence of any user in the organization, regardless of the privacy relationship between the person consuming the controls and the contacts whose presence is being displayed. Were exploring options for a design pattern that would allow you to inject some privacy controls.  Keep in mind though that you would most likely be responsible for implementing this logic, as there is currently no functionality in UCMA that allows you to do that. Polling the WCF REST Service The controls poll the backend WCF service to retrieve the presence of contacts - you can control the refresh interval so that they poll less often. We implemented a caching layer so that the WCF service is always communicating with a presence cache it never communicates directly with Communications Server.  For example, if your web page is showing the presence of sip:[email protected] and 500 people have the page open, the presence cache only contains one instance of the subscription Communications Server is not being polled 500 times for the presence of that contact. Once the presence of a contact changes, it is updated in the cache.  There are some server-based push mechanisms that would work nicely here, such as the one that Outlook Web Access 2010 uses.  Unfortunately we didnt have time to explore these options. Community Contribution Take a look at the project Issue Tracker, there are a couple of things we can use some help with.  Shoot me a note if youre interested in contributing to the project. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• What's new in ASP.Net 4.5 and VS 2012 - part 2

  - by nikolaosk

  This is the second post in a series of posts titled "What's new in ASP.Net 4.5 and VS 2012".You can have a look at the first post in this series, here. Please find all my posts regarding VS 2012, here. In this post I will be looking into the various new features available in ASP.Net 4.5 and VS 2012.I will be looking into the enhancements in the HTML Editor,CSS Editor and Javascript Editor.In order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 2012 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine.I will work fine in Windows 7 as well so do not worry if you do not have the latest Microsoft operating system.1) Launch VS 2012 and create a new Web Forms application by going to File - >New Web Site - > ASP.Net Web Forms Site.2) Choose an appropriate name for your web site.3) I would like to point out the new enhancements in the CSS editor in VS 2012. In the Solution Explorer in the Content folder and open the Site.cssThen when I try to change the background-color property of the html element, I get a brand new handy color-picker. Have a look at the picture below  Please note that the color-picker shows all the colors that have been used in this website. Then you can expand the color-picker by clicking on the arrows. Opacity is also supported. Have a look at the picture below4) There are also mobile styles in the Site.css .These are based on media queries.Please have a look at another post of mine on CSS3 media queries. Have a look at the picture below In this case when the maximum width of the screen is less than 850px there will be a new layout that will be dictated by these new rules. Also CSS snippets are supported. Have a look at the picture below I am writing a new CSS rule for an image element. I write the property transform and hit tab and then I have cross-browser CSS handling all of the major vendors.Then I simply add the value rotate and it is applied to all the cross browser options.Have a look at the picture below.  I am sure you realise how productive you can become with all these CSS snippets. 5) Now let's have a look at the new HTML editor enhancements in VS 2012You can drag and drop a GridView web server control from the Toolbox in the Site.master file.You will see a smart tag (that was only available in the Design View) that you can expand and add fields, format the web server control.Have a look at the picture below 6) We also have available code snippets. I type <video and then press tab twice.By doing that I have the rest of the HTML 5 markup completed.Have a look at the picture below 7) I have new support for the input tag including all the HTML 5 types and all the new accessibility features.Have a look at the picture below   8) Another interesting feature is the new Intellisense capabilities. When I change the DocType to 4.01 and the type <audio>,<video> HTML 5 tags, Intellisense does not recognise them and add squiggly lines.Have a look at the picture below All these features support ASP.Net Web forms, ASP.Net MVC applications and Web Pages. 9) Finally I would like to show you the enhanced support that we have for Javascript in VS 2012. I have full Intellisense support and code snippets support.I create a sample javascript file. I type If and press tab. I type while and press tab.I type for and press tab.In all three cases code snippet support kicks in and completes the code stack. Have a look at the picture below We also have full Intellisense support.Have a look at the picture below I am creating a simple function and then type some sort of XML like comments for the input parameters. Have a look at the picture below. Then when I call this function, Intellisense has picked up the XML comments and shows the variables data types.Have a look at the picture below Hope it helps!!!

  Read the article

• From the Tips Box: Pre-installation Prep Work Makes Service Pack Upgrades Smoother

  - by Jason Fitzpatrick

  Last month Microsoft rolled out Windows 7 Service Pack 1 and, like many SP releases, quite a few people are hanging back to see what happens. If you want to update but still error on the side of caution, reader Ron Troy  offers a step-by-step guide. Ron’s cautious approach does an excellent job minimizing the number of issues that could crop up in a Service Pack upgrade by doing a thorough job updating your driver sets and clearing out old junk before you roll out the update. Read on to see how he does it: Just wanted to pass on a suggestion for people worried about installing Service Packs.  I came up with a ‘method’ a couple years back that seems to work well. Run Windows / Microsoft Update to get all updates EXCEPT the Service Pack. Use Secunia PSI to find any other updates you need. Use CCleaner or the Windows disk cleanup tools to get rid of all the old garbage out there.  Make sure that you include old system updates. Obviously, back up anything you really care about.  An image backup can be real nice to have if things go wrong. Download the correct SP version from Microsoft.com; do not use Windows / Microsoft Update to get it.  Make sure you have the 64 bit version if that’s what you have installed on your PC. Make sure that EVERYTHING that affects the OS is up to date.  That includes all sorts of drivers, starting with video and audio.  And if you have an Intel chipset, use the Intel Driver Utility to update those drivers.  It’s very quick and easy.  For the video and audio drivers, some can be updated by Intel, some by utilities on the vendor web sites, and some you just have to figure out yourself.  But don’t be lazy here; old drivers and Windows Service Packs are a poor mix. If you have 3rd party software, check to see if they have any updates for you.  They might not say that they are for the Service Pack but you cut your risk of things not working if you do this. Shut off the Antivirus software (especially if 3rd party). Reboot, hitting F8 to get the SafeMode menu.  Choose SafeMode with Networking. Log into the Administrator account to ensure that you have the right to install the SP. Run the SP.  It won’t be very fancy this way.  Maybe 45 minutes later it will reboot and then finish configuring itself, finally letting you log in. Total installation time on most of my PC’s was about 1 hour but that followed hours of preparation on each. On a separate note, I recently got on the Nvidia web site and their utility told me I had a new driver available for my GeForce 8600M GS.  This laptop had come with Vista, now has Win 7 SP1.  I had a big surprise from this driver update; the Windows Experience Score on the graphics side went way up.  Kudo’s to Nvidia for doing a driver update that actually helps day to day usage.  And unlike ATI’s updates (which I need for my AGP based system), this update was fairly quick and very easy.  Also, Nvidia drivers have never, as I can recall, given me BSOD’s, many of which I’ve gotten from ATI (TDR errors).How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

  Read the article

• How to make software development decisions based on facts

  - by Laila

  We love to hear stories about the many and varied ways our customers use the tools that we develop, but in our earnest search for stories and feedback, we'd rather forgotten that some of our keenest users are fellow RedGaters, in the same building. It was almost by chance that we discovered how the SQL Source Control team were using SmartAssembly. As it happens, there is a separate account (here on Simple-Talk) of how SmartAssembly was used to support the Early Access program; by providing answers to specific questions about how the SQL Source Control product was used. But what really got us all grinning was how valuable the SQL Source Control team found the reports that SmartAssembly was quickly and painlessly providing. So gather round, my friends, and I'll tell you the Tale Of The Framework Upgrade . <strange mirage effect to denote a flashback. A subtle background string of music starts playing in minor key> Kevin and his team were undecided. They weren't sure whether they could move their software product from .NET 2 to .NET 3.5 , let alone to .NET 4. You see, they were faced with having to guess what version of .NET was already installed on the average user's machine, which I'm sure you'll agree is no easy task. Upgrading their code to .NET 3.5 might put a barrier to people trying the tool, which was the last thing Kevin wanted: "what if our users have to download X, Y, and Z before being able to open the application?" he asked. That fear of users having to do half an hour of downloads (.followed by at least ten minutes of installation. followed by a five minute restart) meant that Kevin's team couldn't take advantage of WCF (Windows Communication Foundation). This made them sad, because WCF would have allowed them to write their code in a much simpler way, and in hours instead of days (as was the case with .NET 2). Oh sure, they had a gut feeling that this probably wasn't the case, 3.5 had been out for so many years, but they weren't sure. <background music switches to major key> SmartAssembly Feature Usage Reporting gave Kevin and his team exactly what they needed: hard data on their users' systems, both hardware and software. I was there, I saw it happen, and that's not the sort of thing a woman quickly forgets. I'll always remember his last words (before he went to lunch): "You get lots of free information by just checking a box in SmartAssembly" is what he said. For example, they could see how many CPU cores their customers were using, and found out that they should be making use of parallelism to take advantage of available cores. But crucially, (and this is the moral of my tale, dear reader), Kevin saw that 99% of SQL Source Control's users were on .NET 3.5 or above.   So he knew that they could make the switch and that is was safe to do so. With this reassurance, they could use WCF to not only make development easier, but to also give them a really nice way to do inter-process communication between the Source Control and the SQL Compare products. To have done that on .NET 2.0 was certainly possible <knowing chuckle>, but Microsoft have made it a lot easier with WCF. <strange mirage effect to denote end of flashback> So you see, with Feature Usage Reporting, they finally got the hard evidence they needed to safely make the switch to .NET 3.5, knowing it would not inconvenience their users. And that, my friends, is just the sort of thing we like to hear.

  Read the article

• Book &ldquo;Team Foundation Server 2012 Starter&rdquo; published!

  - by Jakob Ehn

  During the summer and fall this year, me and my colleague Terje Sandstrøm has worked together on a book project that has now finally hit the stores! The title of the book is Team Foundation Server 2012 Starter and is published by Packt Publishing. You can find it at http://www.packtpub.com/team-foundation-server-2012-starter/book or from Amazon http://www.amazon.com/dp/1849688389                          The book is part of a concept that Packt have with starter-books, intended for people new to Team Foundation Server 2012 and who want a quick guideline to get it up and working. It covers the fundamentals, from installing and configuring it, and how to use it with source control, work items and builds. It is done as a step-by-step guide, but also includes best practices advice in the different areas. It covers the use of both the on-premises and the TFS Services version. It also has a list of links and references in the end to the most relevant Visual Studio 2012 ALM sites. Our good friend and fellow ALM MVP Mathias Olausson have done the review of the book, thanks again Mathias! We hope the book fills the gap between the different online guide sites and the more advanced books that are out. Check it out and please let us know what you think of the book! Book Description Your quick start guide to TFS 2012, top features, and best practices with hands on examples Overview Install TFS 2012 from scratch Get up and running with your first project Streamline release cycles for maximum productivity In Detail Team Foundation Server 2012 is Microsoft's leading ALM tool, integrating source control, work item and process handling, build automation, and testing. This practical "Team Foundation Server 2012 Starter Guide" will provide you with clear step-by-step exercises covering all major aspects of the product. This is essential reading for anyone wishing to set up, organize, and use TFS server. This hands-on guide looks at the top features in Team Foundation Server 2012, starting with a quick installation guide and then moving into using it for your software development projects. Manage your team projects with Team Explorer, one of the many new features for 2012. Covering all the main features in source control to help you work more efficiently, including tools for branching and merging, we will delve into the Agile Planning Tools for planning your product and sprint backlogs. Learn to set up build automation, allowing your team to become faster, more streamlined, and ultimately more productive with this "Team Foundation Server 2012 Starter Guide". What you will learn from this book Install TFS 2012 on premise Access TFS Services in the cloud Quickly get started with a new project with product backlogs, source control, and build automation Work efficiently with source control using the top features Understand how the tools for branching and merging in TFS 2012 help you isolate work and teams Learn about the existing process templates, such as Visual Studio Scrum 2.0 Manage your product and sprint backlogs using the Agile planning tools Approach This Starter guide is a short, sharp introduction to Team Foundation Server 2012, covering everything you need to get up and running. Who this book is written for If you are a developer, project lead, tester, or IT administrator working with Team Foundation Server 2012 this guide will get you up to speed quickly and with minimal effort.

  Read the article

• Read Mobi eBooks on Kindle for PC

  - by Matthew Guay

  Do you use your PC as a eBook reader?  Kindle for PC makes it easy to read thousands of books from the Kindle Store on your computer. What you may not know is that is also works with .mobi format too, so you can increase the amount of books you can read. Amazon has jumpstarted the eBook market with their popular Kindle device.  Last fall Amazon unveiled Kindle for PC, and we reviewed how you can Read Kindle Books On Your Computer with Kindle for PC.  Whether or not you own a Kindle or other eBook reader, this is a great way to take advantage of the thousands of eBooks available from the Kindle Store today. It supports azw, prc, and tpz format, which are sold from the Kindle store, but it also supports Mobipocket (.mobi) eBooks that are not DRM protected.  Here’s how you can add them to Kindle for PC so you can easily read them on your PC Getting Started: First, make sure you have Kindle for PC (link below) installed on your computer. Sign in with your Amazon account when you first run it. Kindle for PC lets you easily read eBooks downloaded from the Kindle Store, but it doesn’t have any way to add other eBooks directly from the program. To add eBooks, you can sometimes download and double-click on the books, and they will open in Kindle for PC and be automatically added to the library.  However, this does not always seem to work. So instead, browse to your Documents folder (simply click on the Documents link on your Start menu), and double-click on the My Kindle Content folder. This folder contains all the Kindle books you have downloaded.  If you have other eBooks you would like to add to Kindle for PC, simply drag-and-drop or copy and paste them into this folder.  Here we have a .mobi formatted book downloaded from the Gutenberg Project that we’re dragging into the folder. Now, close and reopen Kindle for PC.  It should now show your new eBook right beside the eBooks you have downloaded from the Kindle Store. These eBooks work just the same as the ones downloaded from the Kindle store, and you can change font size and add bookmarks just as with other eBooks. The eBooks downloaded this way may show up with either a Amazon logo or a mobile device icon.  You should only see the mobile device icon on .mobi files formatted for mobile devices; other ones should show up with the Amazon logo.  In this screen, Pilgrim’s Progress is a standard .mobi book, The Adventures of Sherlock Holmes is a mobipocket book, and the others are downloaded from the Kindle Store. Conclusion This is a great way to read eBooks from across the internet on Kindle for PC.  Wikipedia’s Kindle page has a list of websites that offer eBooks formatted for the Kindle, so be sure to check it out for more books. Links Download Kindle for PC List of websites that offer eBooks that will work on Kindle – via Wikipedia Similar Articles Productive Geek Tips Read Kindle Books On Your Computer with Kindle for PCInstall Adobe PDF Reader on Ubuntu EdgyHow to Access your Box.Net Account from Ubuntu the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer Create Talking Photos using Fotobabble

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• OSI Model

  - by kaleidoscope

  The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer ·         Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. ·         Establishment and termination of a connection to a communications medium. ·         Participation in the process whereby the communication resources are effectively shared among multiple users. ·         Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer ·         Provides the functional and procedural means to transfer data between network entities. ·         Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). ·         Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. ·         The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. ·         MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. ·         LLC layer controls frame synchronization, flow control and error checking.   Layer 3: Network Layer ·         Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. ·         Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. ·         Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible.   Layer 4: Transport Layer ·         Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. ·         Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. ·         Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer ·         Controls the dialogues (connections) between computers. ·         Establishes, manages and terminates the connections between the local and remote application. ·         Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. ·         Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer ·         Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. ·         Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer ·         This layer interacts with software applications that implement a communicating component. ·         Identifies communication partners, determines resource availability, and synchronizes communication. o       When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o       When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o       In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

  Read the article

• SQL SERVER – DQS Error – Cannot connect to server – A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessions” – SetDataQualitySessionPhaseTwo

  - by pinaldave

  Earlier I wrote a blog post about how to install DQS in SQL Server 2012. Today I decided to write a second part of this series where I explain how to use DQS, however, as soon as I started the DQS client, I encountered an error that will not let me pass through and connect with DQS client. It was a bit strange to me as everything was functioning very well when I left it last time.  The error was very big but here are the first few words of it. Cannot connect to server. A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessions”: System.Data.SqlClient.SqlException (0×80131904): A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessionPhaseTwo”: The error continues – here is the quick screenshot of the error. As my initial attempts could not fix the error I decided to search online and I finally received a wonderful solution from Microsoft Site. The error has happened due to latest update I had installed on .NET Framework 4. There was a  mismatch between the Module Version IDs (MVIDs) of the SQL Common Language Runtime (SQLCLR) assemblies in the SQL Server 2012 database and the Global Assembly Cache (GAC). This mismatch was to be resolved for the DQS to work properly. The workaround is specified here in detail. Scroll to subtopic 4.23 Some .NET Framework 4 Updates Might Cause DQS to Fail. The script was very much straight forward. Here are the few things to not to miss while applying workaround. Make sure DQS client is properly closed The NETAssemblies is based on your OS. NETAssemblies for 64 bit machine – which is my machine is “c:\windows\Microsoft.NET\Framework64\v4.0.30319″. If you have Winodws installed on any other drive other than c:\windows do not forget to change that in the above path. Additionally if you have 32 bit version installed on c:\windows you should use path as ”c:\windows\Microsoft.NET\Framework\v4.0.30319″ Make sure that you execute the script specified in 4.23 sections in this article in the database DQS_MAIN. Do not run this in the master database as this will not fix your error. Do not forget to restart your SQL Services once above script has been executed. Once you open the client it will work this time. Here is the script which I have bit modified from original script. I strongly suggest that you use original script mentioned 4.23 sections. However, this one is customized my own machine. /* Original source: http://bit.ly/PXX4NE (Technet) Modifications: -- Added Database context -- Added environment variable @NETAssemblies -- Main script modified to use @NETAssemblies */ USE DQS_MAIN GO BEGIN -- Set your environment variable -- assumption - Windows is installed in c:\windows folder DECLARE @NETAssemblies NVARCHAR(200) -- For 64 bit uncomment following line SET @NETAssemblies = 'c:\windows\Microsoft.NET\Framework64\v4.0.30319\' -- For 32 bit uncomment following line -- SET @NETAssemblies = 'c:\windows\Microsoft.NET\Framework\v4.0.30319\' DECLARE @AssemblyName NVARCHAR(200), @RefreshCmd NVARCHAR(200), @ErrMsg NVARCHAR(200) DECLARE ASSEMBLY_CURSOR CURSOR FOR SELECT name AS NAME FROM sys.assemblies WHERE name NOT LIKE '%ssdqs%' AND name NOT LIKE '%microsoft.sqlserver.types%' AND name NOT LIKE '%practices%' AND name NOT LIKE '%office%' AND name NOT LIKE '%stdole%' AND name NOT LIKE '%Microsoft.Vbe.Interop%' OPEN ASSEMBLY_CURSOR FETCH NEXT FROM ASSEMBLY_CURSOR INTO @AssemblyName WHILE @@FETCH_STATUS = 0 BEGIN BEGIN TRY SET @RefreshCmd = 'ALTER ASSEMBLY [' + @AssemblyName + '] FROM ''' + @NETAssemblies + @AssemblyName + '.dll' + ''' WITH PERMISSION_SET = UNSAFE' EXEC sp_executesql @RefreshCmd PRINT 'Successfully upgraded assembly ''' + @AssemblyName + '''' END TRY BEGIN CATCH IF ERROR_NUMBER() != 6285 BEGIN SET @ErrMsg = ERROR_MESSAGE() PRINT 'Failed refreshing assembly ' + @AssemblyName + '. Error message: ' + @ErrMsg END END CATCH FETCH NEXT FROM ASSEMBLY_CURSOR INTO @AssemblyName END CLOSE ASSEMBLY_CURSOR DEALLOCATE ASSEMBLY_CURSOR END GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• View Mobile Websites in Windows with Safari 4 Developer Tools

  - by Matthew Guay

  Want to try out mobile websites designed for the iPhone and other mobile devices on your PC?  Safari 4 for Windows lets you do this easily with their developer tools. By default, Safari will show standard desktop websites.  But by making a simple change, you can switch it to work like Safari Mobile on the iPhone or iPod Touch. Getting Started First make sure you have Safari 4 for Windows installed.  You can download Safari directly (link below) and install it as usual.   Or if you already have another Apple program installed, such as QuickTime or iTunes, then you can install it from Apple Software update.  Simply enter apple software update in the Start menu search box. And then select Safari 4 from the list of new software available.  Click Install to automatically download and install Safari. Accept the license Agreement, and then Safari will automatically install. Once this is finished, Safari will be ready to use. View Mobile Sites in Safari First, we need to enable the developer tools.  Click the gear icon on the toolbar, and select Preferences. Click the Advanced tab, and then check the box that says “Show Develop menu in menu bar”. Once you’ve closed your settings box, click the page icon, select Develop, then User Agent, and then choose one of the Mobile Safari settings.  In our test we chose Mobile Safari 3.1.2 – iPhone. To make your browser emulate a mobile device better, you can hide the bookmarks and tab bar to have a more streamlined interface. Click the Gear icon, and select “Hide Bookmarks Bar”, and then repeat and click “Hide Tab Bar”. You can also shrink your window to be closer to the size of a mobile device screen.  Once you’ve done these things, Safari should look similar to this screenshot.  Here we have loaded Google.com, and you can see it in its iPhone-style interface. Simply enter any website into the address bar, and it will load in its mobile interface if it has one.  Here is Google’s other mobile offerings, right inside Windows. Gmail loads messages with the default iPhone interface. One especially interesting mobile site is Apple’s online iPhone User Guide.  When loaded in Safari with the iPhone setting, it loads with a very nice mobile UI that works just like an iPhone app.  In fact, you can even click and drag to scroll, just like you would with your finger on an iPhone. Conclusion Even if you do not have a Smartphone, you can still preview what websites will look like on them with this trick. Not all sites will work of course, but it’s fun to play around with different sites that have mobile versions. Links: Safari 4 Download Apple iPhone online user guide Similar Articles Productive Geek Tips Make Safari Stop Crashing Every 20 Seconds on Windows VistaCustomize Safari for Windows ToolbarSave Screen Space by Hiding the Bookmarks Toolbar in Safari for WindowsEdit Text in a Webpage with Internet Explorer 8Keep Websites From Using Tiny Fonts in Safari TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet

  Read the article

• Boost Netbook Speed with an SD Card & ReadyBoost

  - by Matthew Guay

  Looking for a way to increase the performance of your netbook?  Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less.  Even if you want to add more ram, often they can only be upgraded to a max of 2GB.  With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory.  If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note:  ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds.  Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer.  Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this.  Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer.  It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before.  This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used.  Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive.  You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier.  Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit.  We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less.  SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

  Read the article

• Beginner Geek: How to Burn an ISO Image to a Disc

  - by Mysticgeek

  There may be a time when you have an ISO image that you need to burn to a CD or DVD for use in a computer or other device. Today we show you how to do it using ImgBurn, ISO Recorder, and Windows Disc Image Burner in Windows 7. You might need to burn an ISO of an operating system, software app, CD, DVD…etc. It doesn’t matter what the ISO image is, burning an image is a fairly straight-forward process and here we’ll take a look at three free options to accomplish it. Using ImgBurn ImgBurn is an awesome free utility that will create ISO images, allow out burn almost anything, and a lot more. Although there are a lot advanced features available, burning an ISO to disc is easy. Download and install ImgBurn (link below) taking the defaults in the install wizard. The main thing to watch for and uncheck during installation is when it offers the worthless Ask Toolbar. The easiest way to use ImgBurn is to burn an image to disc is pop in a blank disc to the CD/DVD drive, right-click on the ISO file, and select Burn using ImgBurn. ImgBurn opens up with the source and destination fields already filled in. You can leave the default settings, then click the Write button. You’ll notice that the ImgBurn Log screen opens, this is by default and is meant to show error messages you may receive during the writing process.   A successful burn! That is all there is to it…click Ok and close out of ImgBurn. Use ISO Recorder ISO Recorder (link below) is another great utility for burning ISO images to disc. They have a version for XP, Vista, and Windows 7 (32 & 64-bit Versions). Pop your blank disc into your CD/DVD drive and right-click on the ISO image file and select Copy image to CD from the Context Menu. In the next screen the image file path is in the Source Image file field. Under Recorder select the drive with your blank disc, select a recording speed and click Next. You’ll see a progress screen while the data is written to the disc and finalizing… That’s it! Your disc will pop out and you can click Finish to close out of ISO Recorder. Use Windows 7 If You’re using Windows 7, use the built in Windows Disc Image Burner feature to burn ISO images to disc. The process is very straight-forward, and for a full walkthrough on this, check out our article on how to burn an ISO image in Windows 7. Conclusion You don’t need an expensive commercial application to burn an ISO image to disc. Using any one of these free utilities will get the job done quite nicely. Download ImgBurn Download ISO Recorder Similar Articles Productive Geek Tips How to Make a Windows Vista Repair Disk If You Don’t Have OneHow to Create a Windows ISO from a Disc Using ImgBurnEasily Burn Discs With BurnAware Free EditionCreate A Windows Home Server Home Computer Restore DiscWhy is Amarok’s "Burn This Album" Disabled in Ubuntu? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows If it were only this easy

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 23 (sys.dm_db_index_usage_stats)

  - by Tamarick Hill

  The sys.dm_db_index_usage_stats Dynamic Management View is used to return usage information about the various indexes on your SQL Server instance. Let’s have a look at this DMV against our AdventureWorks2012 database so we can examine the information returned. SELECT * FROM sys.dm_db_index_usage_stats WHERE database_id = db_id('AdventureWorks2012') The first three columns in the result set represent the database_id, object_id, and index_id of a given row. You can join these columns back to other system tables to extract the actual database, object, and index names. The next four columns are probably the most beneficial columns within this DMV. First, the user_seeks column represents the number of times that a user query caused a seek operation against a particular index. The user_scans column represents how many times a user query caused a scan operation on a particular index. The user_lookups column represents how many times an index was used to perform a lookup operation. The user_updates column refers to how many times an index had to be updated due to a write operation that effected a particular index. The last_user_seek, last_user_scan, last_user_lookup, and last_user_update columns provide you with DATETIME information about when the last user scan, seek, lookup, or update operation was performed. The remaining columns in the result set are the same as the ones we previously discussed, except instead of the various operations being generated from user requests, they are generated from system background requests. This is an extremely useful DMV and one of my favorites when it comes to Index Maintenance. As we all know, indexes are extremely beneficial with improving the performance of your read operations. But indexes do have a downside as well. Indexes slow down the performance of your write operations, and they also require additional resources for storage. For this reason, in my opinion, it is important to regularly analyze the indexes on your system to make sure the indexes you have are being used efficiently. My AdventureWorks2012 database is only used for demonstrating or testing things, so I dont have a lot of meaningful information here, but for a Production system, if you see an index that is never getting any seeks, scans, or lookups, but is constantly getting a ton of updates, it more than likely would be a good candidate for you to consider removing. You would not be getting much benefit from the index, but yet it is incurring a cost on your system due to it constantly having to be updated for your write operations, not to mention the additional storage it is consuming. You should regularly analyze your indexes to ensure you keep your database systems as efficient and lean as possible. One thing to note is that these DMV statistics are reset every time SQL Server is restarted. Therefore it would not be a wise idea to make decisions about removing indexes after a Server Reboot or a cluster roll. If you restart your SQL Server instances frequently, for example if you schedule weekly/monthly cluster rolls, then you may not capture indexes that are being used for weekly/monthly reports that run for business users. And if you remove them, you may have some upset people at your desk on Monday morning. If you would like to begin analyzing your indexes to possibly remove the ones that your system is not using, I would recommend building a process to load this DMV information into a table on scheduled basis, depending on how frequently you perform an operation that would reset these statistics, then you can analyze the data over a period of time to get a more accurate view of what indexes are really being used and which ones or not. For more information about this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms188755.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• Opening the Internet Settings Dialog and using Windows Default Network Settings via Code

  - by Rick Strahl

  Ran into a question from a client the other day that asked how to deal with Internet Connection settings for running  HTTP requests. In this case this is an old FoxPro app and it's using WinInet to handle the actual HTTP connection. Another client asked a similar question about using the IE Web Browser control and configuring connection properties. Regardless of platform or tools used to do HTTP connections, you can probably configure custom connection and proxy settings in your application to configure http connection settings manually. However, this is a repetitive process for each application requires you to track system information in your application which is undesirable. Often it's much easier to rely on the system wide proxy settings that Windows provides via the Internet Settings dialog. The dialog is a Control Panel applet (inetcpl.cpl) and is the same dialog that you see when you pop up Internet Explorer's Options dialog: This dialog controls the Windows connection properties that determine how the Windows HTTP stack connects to the Internet and how Proxy's are used if configured. Depending on how the HTTP client is configured - it can typically inherit and use these global settings. Loading the Settings Dialog Programmatically The settings dialog is a Control Panel applet with the name of: inetcpl.cpl and you can use any Shell execution mechanism (Run dialog, ShellExecute API, Process.Start() in .NET etc.) to invoke the dialog. Changes made there are immediately reflected in any applications that use the default connection settings. In .NET you can simply do this to bring up the Internet Settings dialog with the Connection tab enabled: Process.Start("inetcpl.cpl",",4"); In FoxPro you can simply use the RUN command to execute inetcpl.cpl: lcCmd = "inetcpl.cpl ,4" RUN &lcCmd Using the Default Connection/Proxy Settings When using WinInet you specify the Http connect type in the call to InternetOpen() like this (FoxPro code here): hInetConnection=; InternetOpen(THIS.cUserAgent,0,; THIS.chttpproxyname,THIS.chttpproxybypass,0) The second parameter of 0 specifies that the default system proxy settings should be used and it uses the settings from the Internet Settings Connections tab. Other connection options for HTTP connections include 1 - direct (no proxies and ignore system settings), 3 - explicit Proxy specification. In most situations a connection mode setting of 0 should work. In .NET HTTP connections by default are direct connections and so you need to explicitly specify a default proxy or proxy configuration to use. The easiest way to do this is on the application level in the config file: <configuration> <system.net> <defaultProxy> <proxy bypassonlocal="False" autoDetect="True" usesystemdefault="True" /> </defaultProxy> </system.net> </configuration> You can do the same sort of thing in code specifying the proxy explicitly and using System.Net.WebProxy.GetDefaultProxy(). So when making HTTP calls to Web Services or using the HttpWebRequest class you can set the proxy with: StoreService.Proxy = WebProxy.GetDefaultProxy(); All of this is pretty easy to deal with and in my opinion is a way better choice to managing connection settings than having to track this stuff in your own application. Plus if you use default settings, most of the time it's highly likely that the connection settings are already properly configured making further configuration rare.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Windows  HTTP  .NET  FoxPro   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQL SERVER – Sends backups to a Network Folder, FTP Server, Dropbox, Google Drive or Amazon S3

  - by pinaldave

  Let me tell you about one of the most useful SQL tools that every DBA should use – it is SQLBackupAndFTP. I have been using this tool since 2009 – and it is the first program I install on a SQL server. Download a free version, 1 minute configuration and your daily backups are safe in the cloud. In summary, SQLBackupAndFTP Creates SQL Server database and file backups on schedule Compresses and encrypts the backups Sends backups to a network folder, FTP Server, Dropbox, Google Drive or Amazon S3 Sends email notifications of job’s success or failure SQLBackupAndFTP comes in Free and Paid versions (starting from $29) – see version comparison. Free version is fully functional for unlimited ad hoc backups or for scheduled backups of up to two databases – it will be sufficient for many small customers. What has impressed me from the beginning – is that I understood how it works and was able to configure the job from a single form (see Image 1 – Main form above) Connect to you SQL server and select databases to be backed up Click “Add backup destination” to configure where backups should go to (network, FTP Server, Dropbox, Google Drive or Amazon S3) Enter your email to receive email confirmations Set the time to start daily full backups (or go to Settings if you need Differential or  Transaction Log backups on a flexible schedule) Press “Run Now” button to test You can get to this form if you click “Settings” buttons in the “Schedule section”. Select what types of backups and how often you want to run them and you will see the scheduled backups in the “Estimated backup plan” list A detailed tutorial is available on the developer’s website. Along with SQLBackupAndFTP setup gives you the option to install “One-Click SQL Restore” (you can install it stand-alone too) – a basic tool for restoring just Full backups. However basic, you can drag-and-drop on it the zip file created by SQLBackupAndFTP, it unzips the BAK file if necessary, connects to the SQL server on the start, selects the right database, it is smart enough to restart the server to drop open connections if necessary – very handy for developers who need to restore databases often. You may ask why is this tool is better than maintenance tasks available in SQL Server? While maintenance tasks are easy to set up, SQLBackupAndFTP is still way easier and integrates solution for compression, encryption, FTP, cloud storage and email which make it superior to maintenance tasks in every aspect. On a flip side SQLBackupAndFTP is not the fanciest tool to manage backups or check their health. It only works reliably on local SQL Server instances. In other words it has to be installed on the SQL server itself. For remote servers it uses scripting which is less reliable. This limitations is actually inherent in SQL server itself as BACKUP DATABASE command  creates backup not on the client, but on the server itself. This tool is compatible with almost all the known SQL Server versions. It works with SQL Server 2008 (all versions) and many of the previous versions. It is especially useful for SQL Server Express 2005 and SQL Server Express 2008, as they lack built in tools for backup. I strongly recommend this tool to all the DBAs. They must absolutely try it as it is free and does exactly what it promises. You can download your free copy of the tool from here. Please share your experience about using this tool. I am eager to receive your feedback regarding this article. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, SQLServer, T SQL, Technology

  Read the article

• F# WPF Form &ndash; the basics

  - by MarkPearl

  I was listening to Dot Net Rocks show #560 about F# and during the podcast Richard Campbell brought up a good point with regards to F# and a GUI. In essence what I understood his point to be was that until one could write an end to end application in F#, it would be a hard sell to developers to take it on. In part I agree with him, while I am beginning to really enjoy learning F#, I can’t but help feel that I would be a lot further into the language if I could do my Windows Forms like I do in C# or VB.NET for the simple reason that in “playing” applications I spend the majority of the time in the UI layer… So I have been keeping my eye out for some examples of creating a WPF form in a F# project and came across Tim’s F# Twitter Stream Sample, which had exactly this…. of course he actually had a bit more than a basic form… but it was enough for me to scrap the insides and glean what I needed. So today I am going to make just the very basic WPF form with all the goodness of a XAML window. Getting Started First thing we need to do is create a new solution with a blank F# application project – I have made mine called FSharpWPF. Once you have the project created you will need to change the project type from a Console Application to a Windows Application. You do this by right clicking on the project file and going to its properties… Once that is done you will need to add the appropriate references. You do this by right clicking on the References in the Solution Explorer and clicking “Add Reference'”. You should add the appropriate .Net references below for WPF & XAMl to work. Once these references are added you then need to add your XAML file to the project. You can do this by adding a new item to the project of type xml and simply changing the file extension from xml to xaml. Once the xaml file has been added to the project you will need to add valid window XAML. Example of a very basic xaml file is shown below… <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="F# WPF WPF Form" Height="350" Width="525"> <Grid> </Grid> </Window> Once your xaml file is done… you need to set the build action of the xaml file from “None” to “Resource” as depicted in the picture below. If you do not set this you will get an IOException error when running the completed project with a message along the lines of “Cannot locate resource ‘window.xaml’ You then need to tie everything up by putting the correct F# code in the Program.fs to load the xaml window. In the Program.fs put the following code… module Program open System open System.Collections.ObjectModel open System.IO open System.Windows open System.Windows.Controls open System.Windows.Markup [<STAThread>] [<EntryPoint>] let main(_) = let w = Application.LoadComponent(new System.Uri("/FSharpWPF;component/Window.xaml", System.UriKind.Relative)) :?> Window (new Application()).Run(w) Once all this is done you should be able to build and run your project. What you have done is created a WPF based window inside a FSharp project. It should look something like below…   Nothing to exciting, but sufficient to illustrate the very basic WPF form in F#. Hopefully in future posts I will build on this to expose button events etc.

  Read the article

• Enable Full Screen Mode in Media Center Without Trapping the Mouse

  - by DigitalGeekery

  If you have a dual monitor setup and use Windows Media Center, you’re probably aware that when WMC is in full screen mode, it traps the mouse so you can’t work on a second monitor. Here we look at how to solve the annoyance. The Maxifier is an application that allows you to open Media Center in full screen mode without restricting the mouse. It relieves the annoyance of WMC capturing your mouse on a dual monitor setup. Note: If you don’t have two monitors attached, most of The Maxifier’s functions won’t work. Installation and Use Download, extract, and install The Maxifier. (See the download link below) The Maxifier runs minimized in the system tray and you access the options by right-clicking on the icon. If Media Center is not already open, you can choose Start Media Center to start WMC on the main start screen. Or, choose one of the other selections to open another area of Media Center. By default, Maxifier opens Media Center in full screen mode on the secondary monitor. When Media Center is open in full screen mode, you’ll notice you can now freely move your mouse around your multi-monitor setup. When Media Center is open, you’ll see five additional options. The Fit Screen options simply fits Media Center to the full screen, but still show the Windows borders. Full screen options put WMC in full screen mode.   The Maxifier Options allow you to choose from the various start up options. Selecting Watch for Media Center starting will prompt Maxifier to open WMC to the main start page in full screen mode on the secondary monitor automatically, even if you open Media Center without using The Maxifier.  (You may need to restart for this to take effect) If you have more than 2 monitors, you can define on which monitor to open Media Center, and which monitor you consider to be the main screen.   You can also define a number of Hotkeys in The Maxifier settings. First, select the Enable Hotkeys checkbox. To create a Hotkey, click in the text field and then press the keys to use as the Hotkey. To remove a Hotkey, click in the field and press the Delete key.   Conclusion The Maxifier is a simple program that enables Media Center users to take full advantage of a multi-monitor workspace. It works with both Vista and Windows 7. Version 1.4 is a stable application for Vista, and Version 1.5b is a beta application for Windows 7. Looking for more Media Center tips and tweaks? Check out some startup customizations for Windows 7 Media Center, how to automatically mount and view ISO’s in WMC, and how to add background images and themes to Windows 7 Media Center. Link Download the Maxifier Similar Articles Productive Geek Tips Startup Customizations for Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Lock The Screen While in Full-Screen Mode in Windows Media PlayerSwitch Windows by Hovering the Mouse Over a Window in Windows 7 or VistaIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Steve Jobs’ iPhone 4 Keynote Video Watch World Cup Online On These Sites Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites

  Read the article

• Clone a Hard Drive Using an Ubuntu Live CD

  - by Trevor Bekolay

  Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• SQLAuthority News – Ahmedabad Tech Ed On Road June 11, 2011 – An Event to Remember – A Grand Success of Community Tech Days

  - by pinaldave

  I am very excited to announce the huge success of the Microsoft Community TechDays at Ahmedabad, on 11 June 2011.  The turn-out for this seminar was huge, and there was a great response from the audience.  In fact, the AMA where the conference was held can seat 275 people – but there were over 50 people standing, the event coordinators had to find 150 more chairs, and we even had to turn away 30 people at the door because there was just no more room.  This means that there were over 500 attendees! The event started right on time, at 10 am, with my introduction and welcome to the audience.  My presentation on my favorite subject of “SQL Server Performance Troubleshooting Using Waits and Queues.”  Because of the number of speakers, I had to cut my presentation short by 10 minutes, so I only had 50 minutes to explain how to use swaits and queues to fine tune performance.  There was a good response to my talk from audience. I feel the best presentation, though, was “HTML5 – Future of the Web” by Harish Vaidyanathan.  He explained how HTML5 is going to change the internet, and taught everyone a lot about how to best use Internet Explorer 9, and discussed CSS3, SVG and DOM specifications.  Many people in the audience came specifically for this session – many had to take a half day leave off work just to travel there. At this point we all took a break for lunch, but there was no one taking a nap with a full stomach because we had a presentation of the new Windows Mango phone from Dhananjay Kumar.  New technology like this always wakes everyone up! After this came “TSQL Worst Practices” by Jacob Sebastian.  He too had to cut his talk short by 10 minutes in order to accommodate everyone, but his discussion of what SQL queries to avoid was still excellent. He is magnificent presenter and Ahmedabad loves him. The final presentation was “ASP.NET Tips and Tricks” by Tejas Shah.  This was a good overview of asp.net fundamentals, and how to use them to improve application performance.  However, the day was not over here!  We kept the audience entertained with prizes and give-aways.  Names were drawn for prizes and there was a quiz session with great gifts for the winners. Overall, the day was a huge success.  There was a good mix of SQL and non-SQL subjects, and many audiences members commented on how much they learned.  We had a much bigger turn-out than expected – all the chairs were filled 45 minutes before we even started!  For our next conference we need to find a space that will hold everyone, especially since we are hoping to have 600-800 people attending.  We definitely feel we can reach this goal.  We are already looking forward to the next Ahmedabad Microsoft Community TechDays. Download presentations: HTML5 Beauty of Web -By Harish Vaidyanathan TSQL Worst Practices- By Jacob Sebastian SQL SERVER Performance troubleshooting using Waits and Queues -By Pinal Dave ASP.NET Tips and Tracks -By Tejas Shah Other reports: Tech-Ed on Road 2011- Ahmedabad–A great event- By Jalpesh Tech-Ed 2011 on the Road in Ahmedabad – by Ritesh Shah Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• SQL 2005 Transaction Rollback Hung–unresolved deadlock

  - by steveh99999

  Encountered an interesting issue recently with a SQL 2005 sp3 Enterprise Edition system. Every weekend, a full database reindex was being run on this system – normally this took around one and a half hours. Then, one weekend, the job ran for over 17 hours  - and had yet to complete... At this point, DBA cancelled the job. Job status is now cancelled – issue over…   However, cancelling the job had not killed the reindex transaction – DBCC OPENTRAN was still showing the transaction being open. The oldest open transaction in the database was now over 17 hours old.  Consequently, transaction log % used growing dramatically and locks still being held in the database... Further attempts to kill the transaction did nothing. ie we had a transaction which could not be killed. In sysprocesses, it was apparent the SPID was in rollback status, but the spid was not accumulating CPU or IO. Was the SPID stuck ? On examination of the SQL errorlog – shortly after the reindex had started, a whole bunch of deadlock output had been produced by trace flag 1222. Then this :- spid5s      ***Stack Dump being sent to   xxxxxxx\SQLDump0042.txt spid5s      * ******************************************************************************* spid5s      * spid5s      * BEGIN STACK DUMP: spid5s      *   12/05/10 01:04:47 spid 5 spid5s      * spid5s      * Unresolved deadlock spid5s      * spid5s      *   spid5s      * ******************************************************************************* spid5s      * ------------------------------------------------------------------------------- spid5s      * Short Stack Dump spid5s      Stack Signature for the dump is 0x000001D7 spid5s      External dump process return code 0x20000001. Unresolved deadlock – don’t think I’ve ever seen one of these before…. A quick call to Microsoft support confirmed the following bug had been hit :- http://support.microsoft.com/kb/961479 So, only option to get rid of the hung spid – to restart SQL Server… Fortunately SQL Server restarted without any issues. I was pleasantly surprised to see that recovery on this particular database was fast. However, restarting SQL Server to fix an issue is not something I would normally rush to do... Short term fix – the reindex was changed to use MAXDOP of 1. Longer term fix will be to apply the correct CU, or wait for SQL 2005 sp 4 ?? This should be released any day soon I hope..

  Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >