Search Results

Search found 19934 results on 798 pages for 'usb flash drive'.

Page 366/798 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

• Cannot get at data in my NAS

  - by Ben

  I've got a bit of an issue that I'm hoping you can help me with. I have an Iomega ix4 as my NAS. This runs Linux and each drive in the box has 2 partitions: one for the OS and RAID info, and the second for the actual data. I had it configured as RAID5. Recently one of the drives failed. At this point all of the data was available, it was just reporting a failed drive. I had a drive of the same capacity (although not the exact same spec) which I swapped in place of the failed drive. It recognised it, and started to rebuild the data protection. So far so good ... or so I thought. The next day, after data protection had finished reconstructing, the NAS was telling me that 4 new drives had been added, and wanted confirmation to overwrite the data. Obviously I declined to do this. I swapped the failed drive back in again, in the hope that it would return to its previous state of the data being accessible, but one failed disk. However it didn't - it still tells me that the NAS has 4 new drives in it. I am hopeful that the actual data is untouched, so what I need to do is get it to rebuild the RAID without touching the data on the disks. I have ssh access, and have run stuff like mdadm --examine to see what I can find. The mdadm.conf file has no entry in the "definitions of existing MD arrays" section. I have not run any actual rebuilding commands as yet, because this is entering an area which I am out of my depth in. Please can someone advise the best way of getting my data? Thanks.

  Read the article

• SSD on Vmware ESXI 4 (TRIM? Good Idea?)

  - by nextgenneo

  Hi, I just posted about finding bottle necks and have narrowed it down to having way too many VMs on my machine on one 15K SAS drive. I have plenty of cores and plenty of ram. So I am planning on putting 6 VMs on one drive (so 5 drives for 30 VMs). I am thinking of using a 60GB Vertex 2 SSD. Each of my VMs will only need about 6GB of HDD space so this isn't a big deal. My questions are: does ESXI support Trim and do I really need it if I leave 25% of the drive as free space? If I need it should I get a diff drive that handles garbage collection differently? I have a RAID controller w/ write caching. I will still benefit from this? Will this effect my setup differently? Is there anything I need to consider regarding SSD's in virtualized environments. Thanks for any and all help!

  Read the article

• Tool to test a user account and password (test login)

  - by TheCleaner

  Yeah, I can fire up a VM or remote into something and try the password...I know...but is there a tool or script that will simulate a login just enough to confirm or deny that the password is correct? Scenario: A server service account's password is "forgotten"...but we think we know what it is. I'd like to pass the credentials to something and have it kick back with "correct password" or "incorrect password". I even thought about a drive mapping script with that user account and password being passed to see if it mapped the drive successfully or not but got lost in the logic of making it work correctly...something like: -Script asks for username via msgbox -script asks for password via msgbox -script tries to map a drive to a common share that everyone has access to -script unmaps drive if successful -script returns popup msgbox stating "Correct Password" or else "Incorrect Password" Any help is appreciated...you'd think this would be a rare occurrence not requiring a tool to support it but...well....

  Read the article

• Windows 7. Permission to search but not for any user to browse

  - by acidzombie24

  I recently changed permissions on my external usb drive so users by default dont have read permission. Now i realize i cannot search through the drive. after setting 'everyone' permission to read i could again. How do i set it so everyone does not have read permission except for my username (i hate clicking yes to admin prompt everytime i move a file) and allow the system to search the drive when users are allowed to access those files?

  Read the article

• Resized NTFS partition, now it wont mount.

  - by H4Z3Y

  I have had a 1.5TB drive used as an external for 6 months or so, then I decided to put it in my linux server for network storage. ntfs was being crazy inefficient so I wanted to change the filesystem to ext4. I used the ntfsresize command to reduce the partition to 650GB and that took abour 2 hours, then I deleted all of the entries in fstab like a guide told me too and created a new one the size of the ntfs partition, or, 650GB. after I modified fstab the ntfs partition would no longer mount and when plugging it in to windows it says "This Hard Drive needs to be formatted". any ideas on how I can recover the data off of the drive? I have 600GB of free space on a different drive so I just need some way of copying them off.

  Read the article

• Using an Internal HDD as an External HDD also or an External HDD for installing SAP ?

  - by Asterix

  Is it possible and advisable to use an Internal Hard Drive as an External Hard drive also. I wanted to install SAP ECC 6 on my system which has only 250 GB but atleast 300 GB is required.I wanted to buy an External Drive first, then I heard loading SAP on an External would make it extremely slow. I'll be using it only as a beginer so even if it is a little slow i don't mind. Is it feasible to run such a big application from an External Hard disk ? So can i purchase a 500 or 1 TB Internal Hard disk and use it as an External too by fitting it with the necessary USB 3.0 Hard drive cases and cables ? or should i purchase a External and load SAP onto it ? Thank you.

  Read the article

• Status: 0xc00000e9

  - by Ryan Galloza

  When I start up windows normally it just freezes , I click "Launch Startup Repair" I get this: "Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer" How do I fix this problem?

  Read the article

• What is the difference between running a Windows service vs. running through shell?

  - by Zack

  I am trying to troubleshoot an issue on a Windows 2008 server where running attempting to connect to a "Timberline Data Source" ODBC driver crashes if the call is in a "service" context, but succeeds if the call is initiated manually in a Remote Desktop session. I have set the service to run as my user. I'm wondering if, all else being equal (user, machine, etc), are there any fundamental security/environment differences between running a process as a service vs manually? --- Implementation Details --- In case it is helpful for anyone, I had a system that started as an attempt to connect to a Timberline Database using ODBC and a Python CGI script called via IIS 7. The script itself works fine, however, as soon as I attempt to perform the ODBC connect function, the script crashes without throwing an exception. The script was able to connect fine when executed via command line. The same thing happened when using a C#/.net service, attempting to run via Apache, Windows Scheduler or even a 3rd party scheduling tool. With the last option (the 3rd party scheduling tool, pycron) I set the service up log in as my user and had the same issue (I confirmed via Task Manager that the process running user was, in fact, me). It just doesn't make sense to me why a service, which should be running as my user, appears to still be operating in a different security context or environment. Also, if it's important, the Timberline database is referenced by computer name on the network ("\\timberline-server\Timberline Office\Accounts\AT" or something to that effect) I also realized that, as Joel pointed out, the server DOES have a mapped drive ("Y:" which is mapped to "\\timberline-server\Timberline Office") The DSN is set up at the "System DSN" level which, according to the ODBC Administration Tool, means that the DSN is available to users and services Since I'm not allowed to answer this question yet, I'll post the solution that I arrived on: As Joel Coel mentioned, there actually was a mapped drive scenario. I didn't realize this because the DSN specified a path using UNC. However, it seems as though the actual Timberline Driver referred to a mapped drive. Since services don't start with the mapped drive, I was forced to add the drive mapping code into my service. Since it was written in python, I used code from a Stackoverflow answer that was able to map the drive on the fly.

  Read the article

• Increase/refresh the size of the FreeBSD's main partition

  - by Lucas

  I am using VirtualBox and have my FreeBSD mounted on a virtual drive, which recently ran out of space (10 GB) so I have increased the Virtual Drive size up to the 15 GB - started my FreeBSD and its still out of space, because it doesnt "refresh" the main partition size: # df -h Filesystem Size Used Avail Capacity Mounted on /dev/ada0p2 9.3G 9.3G -711M 108% / devfs 1.0k 1.0k 0B 100% /dev How can I set the partition size to the virtual drive size?

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Hot swap in Ubuntu Server not working

  - by druciferre

  I am running Ubuntu Server 10.04 (lucid lynx), and I just purchased a hot-swap compatible hdd bay and installed it. When I insert a hot-swappable SATA drive, the drive does not show up after running ls /dev/sd?. If I reboot the server, then after it comes back up the drive appears. I have checked /var/log/messages and nothing shows up when I insert the drive, only after rebooting. I have tried the following: $ sudo echo "0 0 0" > /sys/class/scsi_host/host4/scan $ sudo partprobe` $ sudo udevadm trigger Every answer I've found searching Google was one of the things I listed in "I have tried..." and I don't really know what to do at this point. Does anyone know why this occurring?

  Read the article

• AWS instance went down for restart, came back up and has been "Waiting for network configuration... " for 12 hours

  - by kavisiegel

  What happened was about a month ago, I created a new instance, re-configured everything, and mounted the old instances drive to the new one. I then detached the old drive from the instance, but it was still mounted, so it errored out. Now, come the outage last month, and when the instance boots back up - the drive isn't there, because in the downtime, it dismounted. It hangs because the fstab is looking for it. I get word that the server's not up today, I check the logs, re-attach the drive and restart. Now I'm getting "Waiting for network configuration..." and it doesn't seem to be doing anything. Some googling told me that I'm going to need to start from zero again, which I don't think is right. I created a new instance, which booted no problem, then I stopped it and swapped the two old drives into the new instance. Still the same error. Using the fresh AMI, it worked. I figure it's just a misconfigured Amazon file. I can attach the drive to a functioning instance on the same AMI and copy some files over, then try again - but I don't know where to even start or what files to check.

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How to renew permissions on existing partition after upgrade to Windows 7

  - by jayrdub

  My machine has 2 drives. I reformatted and upgraded from XP to Windows 7, but now all the permissions are messed up on the D: drive. What is the best practice for getting the permissions on the D: drive set up to coincide with the new users of the OS. Who should I make owner? And is there a way to clear out all the unknown user's in the D: drive's ACLs?

  Read the article

• How to extend a partition in Windows 2000 Server

  - by user999684

  I have a Windows 2000 Server set up with RAID 5. I initially defined 2 136 GB logical disks 0 and 1. I have a small utility partition on disk 0 along with the C drive. I wish to extend the C drive to use disk 1 as well, which is now configured to drive D. I deleted drive D, but it is still in disk 1. I download partdisk.exe from MS, but am not sure how to accomplish what I want to do. I know I need to use extend, but I think I need to remove disk 1 and somehow add the unallocated space to disk zero, but am not at all confident on how to do it.

  Read the article

• Hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• How to recover zfs pool when root fs fails?

  - by user27138

  I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system root and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data (other then the system). How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

  Read the article

• UEFI boot options gone

  - by user1797930

  I ran into some issues booting Windows after trying to make a complete backup of the disc. After searching for information about some of the error codes, I found advise to change some BIOS settings, but instead I thought I would just "restore defaults" to make sure all settings were set as originally intended. After doing so, all UEFI boot options except for "Windows Boot Manager" are gone. That means, including the CD/DVD drive, so I cannot even boot from a recovery DVD anymore - and as explained, Windows is not able to boot either. Do you have any advice? When I added a secondary drive originally, it was automatically added to the boot options menu. Even when removing and re-adding the drive physically, the option does not appear again. I have tried unplugging power, and hold down start button for 10 seconds, and boot afterwards - no change. It's a laptop so removing CMOS battery is not an option. I have read information that it is an issue with data removed from NVRAM, but I am unable to find a way to recover it. "Add new boot options" requires a path - but the CD/DVD was originally available without any CD's in the drive - so there is no path available to add the drive. I did try to open EFI shell, but it seems not to be embedded in the UEFI/BIOS. It just says "not found". I'm really lost here - any advice is appreciated.

  Read the article

• Transfer disk image to larger/smaller disk

  - by forthrin

  I need to switch the hard drive on a 2006 iMac to a new SSD. I don't have the original installation CDs. I know I can order CDs from Apple, but this costs money. Someone told me it's possible to rip the image of the old drive and transfer to the new drive. If so, does the size of the new drive have to be exactly the same as the old? If not, my questions are: Is it possible to "stretch" the image from 120 MB disk to a 256 MB disk (numbers are examples)? If so, what is the command line for this? Likewise, is it possible to "shrink" an image from a larger disk (eg. 256 MB) to a smaller disk (eg. 120 MB), provided that the actual space used on the disk does not exceed 120 MB? How do you do this on the command line?

  Read the article

• BIOS recognizes HD, but Ubuntu doesn't recognize it as partition

  - by user23792

  Hello, I just stuck in a new 64 GB SSD (literally out of the box) into my Lenovo X61 laptop, replacing an old 5400 RPM 80 GB drive. When I boot the system, my motherboard successfully sees the SATA hard drive. Now I want to install Ubuntu on it. I stick it in the CD drive, bootup the system, and it gets to step 4 (choose partition), but sees no available partitions. Do I need to do something to the hard drive before installing Ubuntu? Many thanks.

  Read the article

• Mac OS X - Time Machine backup fails verification - What can I do to save the history?

  - by usermac75

  Hi, How do I make Time Machine to make a new complete backup without losing older versions of backed up files? Verbose: I am using the Time Machine backup on my OS X (Snow Leopard) to backup the whole computer to an external drive. I especially like the "history", i.e. the feature that allows you to restore the older version of a file. Problem: I had some data corruption on my external backup drive, I repaired it with the System Tool for doing that, it found some faults. I had the disk tool repair the external drive. After that, the external drive was OK and I could use Time Machine again. I let Time Machine do one more backup. Now I made a verification according to http://superuser.com/questions/47628/verifying-time-machine-backups, namely along sudo diff -qr . $HOME/Desktop 2>&1 | tee $HOME/timemachine-diff.log However: After doing the command above, several differences and missing files were reported, approx. 200 files in sum. Whereas some of the missing files were cache or excluded directories, the differences do bother me, especially as some important documents from me are listed as differing. How can I make sure that the data on the external drive is synced correctly? Is it possible to have Time Machine to do a complete new backup without losing the history? Or to have Time Machine compare all files for differences and re-write all files that are different? Or can I set some flags on the files that do not match to have them copied again? (like the archive-flag in Windows/Dos). I'd rather not touch the files because I would like to keep the date of last change/date of creation) Thank you for your thoughts!

  Read the article

• RAID striping on a desktop machine

  - by Blazemore

  I currently have a 120Gib SSD which is pretty fast for things like game loading times and video editing. However, I was wondering about getting another identical drive and hooking it up with a striping RAID array in hardware (I boot multiple operating systems). This would have the dual benefits of providing a larger logical drive, while also providing greater performance. However, I have a few questions: What kind of performance increase can I expect to see with a pair of good quality SSDs? How expensive is a quality desktop RAID controller? Will the controller present the OS with a single logical drive? Does this mean I can still partition it and multi-boot? Basically, can I treat the RAID controller as "a hard drive" at the OS level?

  Read the article

• "Undeleting" partition (NTFS) - recommendations?

  - by kagali-san

  So I have a drive which either suffered from hardware error or, possibly, got a little shock from badly configured Windows unattended install started on the same PC (the drive in question wasn't the install drive..). Quick exam shows that filesystem is seemingly intact, as some data recovery tools work with it (UnFormat rated it as "Excellent"). This may mean that a copy of partition table exists on disk, or a copy of MFT survived whatever happened, or.. Any idea how to restore partition tables/FS header, add a drive letter thus let Windows to mount the filesystem as if nothing happened? (I guess there must be tools of this kind)

  Read the article

• How do I detect a file write error in C?

  - by rich

  I have an embedded environment where a user might insert or remove a USB flash drive. I would like to know if the drive has been removed, or if there is some other problem when I try to write to the drive. However, Linux just saves the information in its buffers and returns with no indicated error. The computer I'm using comes with a 2.4.26 kernel and libc 2.3.2. I'm mounting the drive this way: i = mount(MEMORY_DEV_PATH, MEMORY_MNT_PATH, "vfat", MS_SYNCHRONOUS, NULL); That works: 50:/root # mount /dev/scsi/host0/bus0/target0/lun0/part1 on /mem type vfat (rw,sync) 50:/root # Later, I try to copy a file to it: int ifile, ofile; ifile = open("/tmp/tmpmidi.mid", O_RDONLY); if (ifile < 0) { perror("open in"); break; } ofile = open(current_file_name.c_str(), O_WRONLY | O_SYNC); if (ofile < 0) { perror("open out"); break; } #define BUFSZ 256 char buffer[BUFSZ]; while (1) { i = read(ifile, buffer, BUFSZ); if (i < 0) { perror("read"); break; } j = write(ofile, buffer, i); if (j < 0) { perror("write"); break; } if (i != j) { perror("Sizes wrong"); break; } if (i < BUFSZ) { printf("Copy is finished, I hope\n"); close(ifile); close(ofile); break; } } If this snippet of code is executed with a write-protected USB memory, the result is Copy is finished, I hope amid a flurry of error messages from the kernel on the console. I believe the same thing would happen if I simply removed the USB drive (without unmounting it). I have also fiddled with devfs. I figured out how to get it to automatically mount the drive, (with the REGISTER event) but it never seems to trigger the UNREGISTER when I pull out the memory. How can I determine in my program whether I have successfully created a file? Update 4 July: It was a silly oversight of me not to check the result from close(). Unfortunately, the file can be closed without error. So that didn't help. What about fsync()? That sounds like a good idea, but that didn't catch the error either. There might be some interesting information in /sys if I had such a thing. I believe that didn't get added until 2.6.?. The comment(s) about the quality of my flash drive are probably justified. It's one of the earlier ones. In fact, write protect switches seem to be extremely rare these days. I think I have to use the overkill option: Create a file, unmount & remount the drive, and check to see if the file is there. If that doesn't solve my problem, then something is really messed up! Note to myself: Make sure the file you try to create isn't already there! By the way, this does happen to be a C++ program. You can tell by the .c_str() which I had intended to edit out for simplicity.

  Read the article

• To have a long life with the battery it has to be separated from the Laptop after each use

  - by laptopo1 dsad

  To have a long life with the battery it has to be separated from the Laptop after each use Developing a Laptop and concern about it's battery life Don't be concerned follow this advice how to deal with your Laptop battery. A fresh power supply of your Laptop can be purchased in a very low charge condition, and must be fully charged before use. A different battery pack needs to be fully charged and fully discharged or cycled as much as five times to condition them into performing at full capacity. And also refer your manual instructions of one's Laptop for charging instructions. Inspiron 15z battery Tips: Unplug battery after use: To have a long life with the battery it has to be separated from the Laptop after each use. Clean battery contacts often: Clean your battery's metal contacts once in a month with a cloth moistened with rubbing alcohol. This prevents the transfer of power out of your battery additional efficient. Turn off the WiFi and Bluetooth, in any other case being used: Usually, we activate our WiFi or Bluetooth for whatever reason and tend to forget to Off it, that could spark a huge relieve your battery, Shut off right after the usage. Dell XPS L501x battery Dim notebook screen: When you're with your Laptop in Daytime, you will need for full brightness. But also in case of Night, just dim the screen reducing brightness, which will consume more charge once the brightness might be more and also It's essential on your eyes to determine lesser brighten screen inside nights. Dell Inspiron 17R battery Have hardly any Background programs: Letting more programs to own behind the screen could consume more Dell Inspiron N4010 battery charge hence have very few without background programs are Better. Make use of the Hard disk drive more than CD/DVD drive: Making use of disc drive instead your CD/DVD drive could consume less battery power. Latitude E5400 Battery

  Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >