Search Results

Search found 15248 results on 610 pages for 'slashdot configuration'.

Page 368/610 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• CentOS 5 - Unable to resolve addresses for NFS mounts during boot

  - by sagi

  I have a few servers running CentOS 5.3, and am trying to get 2 NFS mount-points to mount automatically on boot. I added 2 lines similar to the following to fstab: server1:/path1 /path1 nfs soft 0 0 server2:/path2 /path2 nfs soft 0 0 When I run 'mount -a' manually, the mount points are properly mounted as expected. However, when I reboot the machine, only /path2 is mounted. For /path1 I get the following error: mount: can't get address for server1 It obviously looks like a DNS issue, but the record is properly configured in all the DNS servers and is mounted properly if I re-try the mount after the reboot is completed. I could properly fix this by using IP address instead of hostnames in /etc/fstab or adding server1 to /etc/hosts but I would rather not do that. What might be the reason for failing to resolve this specific address during boot time? Why the problem is only with the 1st mount point and the 2nd is properly mounted despite having identical configuration?

  Read the article

• attach two hdds to a computer having 500W smps

  - by Gaurav Sharma

  I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

  Read the article

• How do you configure ISC Bind to support GSS-TSIG Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• How do install Ubuntu from a USB stick?

  - by Sophia

  When I go to the boot menu on my computer and select USB stick, the screen goes black and there comes a flickering underline. Like I could write something. But I can't. Whatever I push, nothing happens. Except the PrintScrn/SysRq button. When I push it, mu computer beeps. I get no choose menu. Nothing. I found out the usb stick is in msdos format. So what format should I use and how can I format it? I am not a computer geek who knows everything. I'm just a beginner. And only 16 years old. I've got a new problem. The screen isn't black anymore. Now there comes an error message: SYSLINUX 4.04 CHS 20110518 Copyright (C) 1994-2011 H.Peter Anvin et al ERROR:No configurationfile found No DEFAULT or UI configuration directive found! boot: And when I write something: boot:example Could not find kernel image:example boot: Why does this fail all the time? ps. I'm using Ubuntu Oneiric 11.10.

  Read the article

• Debian pure-ftpd, Restrict access

  - by durduvakis

  I am running Debian Wheezy, with ISPConfig 3, plus ModSecurity and I would like to restrict access to ftp to specific IP(s) globally (not to specific ftp users only), that can be either 127.0.0.1 or one I would manually add later. I would also like to completely disable ftp access from the web, but allow only from ftp-client software (if that is possible). The idea of closing firewall ports is not what I want. I know I can do this setting some firewall rule though, but that is not what I currently need. I have managed to do this for example on phpmyadmin inside it's .conf file, but unfortunately I cannot find any configuration to alter for pure-ftpd in my system. Restricting web-ftp access maybe possible by adding some rule in apache2 conf, but I am not sure how to write such a rule. Thanks to everyone that can help cheers

  Read the article

• Windows Server 2003 GPO Applied to only a few users?

  - by caleban

  How do I apply the policy: Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Client Server data redirection/Do not allow client printer redirection only to a few users? Do I have to create 2 OU's and 2 policies just for this? I see I can't create a group and apply the GPO to the group and add the users to that group. How do I selectively apply a policy to only a few users without creating a whole new OU for them (and without changing each user's AD properties individually)? Thanks in advance.

  Read the article

• Ubuntu 12.04 Freezes at Bootup

  - by Ryan Yu

  I have an Acer Aspire One Model AO722, that has a dual-boot configuration with Windows 7 Home Premium and Ubuntu 12.04. Processor: AMD C-50, 1.00GHz 2.00GB ram, 64-bit, AMD Radeon HD 6250 Graphics. I installed Ubuntu two days ago, and since then, loading it has been sporadic. Windows 7 still loads just fine, but Ubuntu will sometimes freeze. First time I booted Ubuntu up, it ran no problem. Worked with it for half an hour, then shut down the computer. The second time I booted it up, it froze after ten minutes when I was trying to set up Thunderbird. Third time, same thing. Fourth time, it froze about 5 minutes after bootup when I was trying to connect to my wifi. Fifth time, it ran no problems for about 5~ hours. Then, three consecutive times I've restarted (what is it, the 6th, 7th, and 8th times?) it has gotten to the login screen, I've entered my password, all the text on the page disappears as if its going to load my desktop, and it freezes. A minute ago when I booted Ubuntu up for the 9th time, it loaded the desktop fine. Who knows if it'll crash soon; probably, though. Any ideas?

  Read the article

• Ubuntu 10.10: getting appropiate monitor resolution for lcd hdtv

  - by lurscher

  I'm running Ubuntu 10.10 x86_64 version, with Nvidia 9800 GT, installed 270.41.06 Nvidia drivers following this guide. I have a LG42LH30FR LCD TV connected with the dvi link - RGB PC input I'm able to get 1024x768 resolution without overscan (I can get 1080i = 1366x768 but there is a lot of hidden screen space to the right and I don't know what to do about it). I want to get full HD I can get full HD (1080p = 1920x1080) on Windows XP 64-bit with custom resolution created with Nvidia Control Panel, from reading over xorg.conf configurations it seems I need to add a certain modeling to the monitor configuration, but I don't know where to get the appropriate options for this task any suggestions?

  Read the article

• Dell Powervault MD3000 - Not sharing Files between servers

  - by Kevin

  I'm a developer who has to set up a Dell Powervault MD3000 due to lack of resources. I have connected the Powervault to 2 Dell 2950 servers via the SAS cables. I performed the setup using Dell's MD Storage Manager software (4 disks, RAID 5 with hot spare). Then I added the disks using Windows 2003 disk management (Basic, not dynamic disk and formatted with NTFS). When I add files to the array from one server, they are not visible on the other server (and vice-versa). Is the error in the windows disk management configuration?

  Read the article

• BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

  - by Sheep

  BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

  Read the article

• once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

  - by Sean

  I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

  Read the article

• Need to use wusa to stop endless rebooting on R2

  - by Jack

  I installed 3 updates, which after rebooting resulted in a reboot loop, never going past the "configuring your computer for windows" stage. Last known good configuration, safe mode etc make no difference (as expected). I have no system restore images available. I used dism to uninstall one of the updates, but the other two appear to be MSP patches, and so I cannot use dism to uninstall them. From what I have been reading it appears I must use wusa, however wusa does not seem to be included in WinRE. Does anyone have a suggestion of how I can access wusa to uninstall these updates, and hopefully reverse this problem?

  Read the article

• Setting up Kerberos SSO in Windows 2008 network

  - by Arturs Licis

  We recently introduced Kerberos (SPNEGO) Single Sign-on in our web-portal, and tested it on a Windows network with Windows 2003 domain controller. Now, trying to test it on Windows 2008 R2 controlled network, SSO just doesn't work due to defective tokens. Up to the moment I was pretty sure that there's something wrong about environment and that were NTLM tokens. We double checked IE settings etc, but nothing helped. Then we checked the following settings for both users (logged on a client test-machine, and the one used as a Service Principal): This account supports Kerberos AES 128 bit encryption. This account supports Kerberos AES 256 bit encryption. .. and error message changed to ' GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256CTS mode with HMAC SHA1-96 is not supported/enabled) It makes me think that Internet Explorer receives Kerberos tokens at all times, and there's just some configuration missing, or it was ktpass.exe to be incorrectly executed. Here's how ktpass.exe was invoked: C:ktpass /out portal1.keytab /mapuser USER /princ HTTP/[email protected] /pass *

  Read the article

• Apply Group Policy to Remote Desktop Services users but not when they log on to their local system

  - by Kevin Murray

  Running Windows Server 2008 Service Pack 2 with Remote Desktop Services role. I want to hide the servers drives using a GPO, but not the users local drives when they are logged on to their local system. Using a GPO, I went to "User Configuration - Policies - Administrative Template - Windows Components - Windows Explorer" and enabled "Hide these specified drives in My Computer" and "Prevent access to drives from My Computer" and in both used "Restrict all drives". Then under "Security Filtering" for the GPO, I restricted it to the system running Remote Desktop Services and the specific users who will be using RDS. I then applied the GPO to our domain and it worked a little too well. Not only was I successful in getting the GPO to work for RDS users, but it also affected those same users at their local systems as well. I've tried everything I can think of, but can't figure out how to apply this just to the RDS but not at their local system. What am I missing?

  Read the article

• CentOS VM, NTP synchronization problems

  - by Spirit

  We have three CentOS 5.9 VMs on an ESX3.5 host. Because of the nature of the services we provide it is required that the NTP time is synchronized and the time is correct on all three of them. However one of them constantly drifts back each day for about 66 sec. So far none of us seems to understand as why is this happening. We included the possibility that the VM may be somehow pulling the time from the host, however all of the three VMs have identical configuration settings and they did not have VMware tools installed. Although I realize that this is probably a question of an internal matter and not to ask for on a forum, I would appreciate if anyone of you knows some CentOS NTP diagnostic routines that will help me to diagnose the problem and find a reliable solution. I thank you for the assistance.

  Read the article

• Bugzilla random lag and CPU usage

  - by Serty Oan

  Here is the configuration : Bugzilla (3.4.2) application running on a Ubuntu server 8.04 with Perl 5.8.8. Here is the problem : Sometimes (randomly), pages take very long to load. It can be any of the login page or query.cgi page or buglist.cgi... etc... Using top on the server, I tried to see what was wrong, and saw that sometimes a bugzilla script would use 30% memory and last pretty long (1 to 5 seconds) and sometimes not even show in the list because it responded too quickly or just use 2%. The mysqld process does not seems to be the problem.

  Read the article

• Can't access newly created Subversion repos

  - by Jean-François G. B.

  Sorry in advance, I'm pretty new in server configuration. So I followed this tutorial to install Subversion on my CentOS server. I'm at the part I should test the URL to make sure I can access it and that it's password protected, but it's not working, I can't access it. What is wrong? Is there some config missing? I don't know what more details to give, but if you need some, please ask! :) Thanks in advance.

  Read the article

• nagios contact groups to check_mk

  - by Skiaddict

  I have Nagios installed with traditional configuration files. I have created some contact groups and assigned them to hosts. For web UI I'm using check_mk. And here's the question: Check_mk supports showing hosts/services based on contact group membership. But I can't use the Nagios contact groups in check_mk. (Result should be that if person XYZ is logged in, he see only hosts and services assigned to him.) My users are in LDAP (I'm using check_mk login form, not apache authorisation). I can't find any information about this in documentation so if someone have experience, please tell me how this works. The problem is that I cannot let everybody be admin and receive all alerts...

  Read the article

• Apache virtual hosts - Resources on website not loaded when accessed from other hostname than localhost

  - by Christian Stadegaart

  Running virtual hosts on Mac OS X 10.6.8 running Apache 2.2.22. /etc/hosts is as follows: 127.0.0.1 localhost 3dweergave studio-12.fritz.box 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost Virtual hosts configuration: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot "/opt/local/www/3dweergave" ServerName 3dweergave ErrorLog "logs/3dweergave-error_log" CustomLog "logs/3dweergave-access_log" common <Directory "/opt/local/www/3dweergave"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *:80> ServerName main </VirtualHost> This will output the following settings: *:80 is a NameVirtualHost default server 3dweergave (/opt/local/apache2/conf/extra/httpd-vhosts.conf:21) port 80 namevhost 3dweergave (/opt/local/apache2/conf/extra/httpd-vhosts.conf:21) port 80 namevhost main (/opt/local/apache2/conf/extra/httpd-vhosts.conf:34) I made 3dweergave the default server by putting it first in the list. This will cause all undefined virtual hosts' names to load 3dweergave, and thus http://localhost will point to 3dweergave. Of course, normally, the first in the list is the virtual host main and localhost will point to main, but for testing purposes I switched them. When I navigate to http://localhost, my CakePHP default homepage shows as expected: Screenshot 1 But when I navigate to http://3dweergave, my CakePHP default homepage doesn't show as expected. It looks like every relative link to resources are not accepted by the server: Screenshot 2 For example, the CSS isn't loaded. When I open the source and click on the link, it opens the CSS file in the browser without errors. But when I run FireBug while loading the webpage, it seems that the CSS file isn't retrieved. (<link rel="stylesheet" type="text/css" href="/css/cake.generic.css" />) How can I fix this unwanted behaviour?

  Read the article

• How to solve this problem with a 'tuned' prompt in ZSH?

  - by Mnementh

  I have an adjusted prompt in my ZSH-configuration. Main feature is, that this prompt is colored red, so that I can easily it distinguish from the outputs of programs. My prompt is defined as follows: PROMPT=$'\e[0;31m%n@%m:%~> \e[0m' This works mostly fine, but sometimes my cursor switches to another position on tab-completion and some characters are left behind on the screen and mangle up the commandline. That is a little annoyance, but if someone knows a solution for this, I would appreciate it.

  Read the article

• How do I clone an Ubuntu server under VMWare

  - by dave

  I have a Ubuntu 12.04 server running under VMWare. As best as I can tell, the VMWare vmbk file has been corrupted. The server is operating normally, but this is preventing backups (using Veeam). To remedy this, I'd like to create a duplicate VM without the corruption issue. However, with the corrupted file VMWare can't help me, eg. create a simple clone. I can create a new VM. How do I clone the configuration / data from my problematic server into the new one? Updated: just to clarify: I realise I can't use the VMWare clone tools. I will manually create a new VM (with a base O/S if necessary). How to I replicate the O/S and data from one VM into another?

  Read the article

• The Enterprise Side of JavaFX: Part Two

  - by Janice J. Heiss

  A new article, part of a three-part series, now up on the front page of otn/java, by Java Champion Adam Bien, titled “The Enterprise Side of JavaFX,” shows developers how to implement the LightView UI dashboard with JavaFX 2. Bien explains that “the RESTful back end of the LightView application comes with a rudimentary HTML page that is used to start/stop the monitoring service, set the snapshot interval, and activate/deactivate the GlassFish monitoring capabilities.”He explains that “the configuration view implemented in the org.lightview.view.Browser component is needed only to start or stop the monitoring process or set the monitoring interval.”Bien concludes his article with a general summary of the principles applied:“JavaFX encourages encapsulation without forcing you to build models for each visual component. With the availability of bindable properties, the boundary between the view and the model can be reduced to an expressive set of bindable properties. Wrapping JavaFX components with ordinary Java classes further reduces the complexity. Instead of dealing with low-level JavaFX mechanics all the time, you can build simple components and break down the complexity of the presentation logic into understandable pieces. CSS skinning further helps with the separation of the code that is needed for the implementation of the presentation logic and the visual appearance of the application on the screen. You can adjust significant portions of an application's look and feel directly in CSS files without touching the actual source code.”Check out the article here.

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• Message Date/Time tag in Lotus Notes

  - by TeeKay

  I've noticed that within Notes (8.5.2, basic client, fat client and iNotes) the date/time displayed on the eMail envelope AND the date/time on the message header is the same and appearently that time that Domino received the message. When using BES, the message forwarded to the BlackBerry by Domino/BES has the RECEIVED date/time on the envelope and the SENT date/time displayed in the message. In the basic/fat client with properties the sent time is viewable in one of the "Received" tags. Having the sent time easily viewable is helpful, especially if your trying to trouble-shoot a problem. Is this a configuration feature? Is it selectable in the client or in Domino? Thx

  Read the article

• When to use Nginx PHP Fast CGI with a TCP socket instead of a UNIX socket?

  - by user64204

  I've followed this guide to setup PHP in FastCGI mode with Nginx. This guide describes 2 ways of doing it: TCP socket and UNIX socket. I've ran some Apache Benchmark on my locale machine and here are the results: Below tests ran multiple times to get better average statistics: $ ab -c 200 -n 100000 http://.... APACHE: 1800 req/sec NGINX (TCP socket): 2500 req/sec NGINX (UNIX socket): 15000 req/sec As far as I understand, there is overhead with using a TCP socket rather than a UNIX socket, hence the better performance with the latter. However I was not expecting such a performance difference given that the TCP socket is on the localhost, and therefore would like to ask the following question: Q: Given the huge performance gain with using a UNIX socket, what are the configuration scenarios where it would make sense to use a TCP socket instead?

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >