Search Results

Search found 11561 results on 463 pages for 'xp theme'.

Page 368/463 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • Force startx to run X in a specific resolution and refresh Rate

    - by Z9iT
    From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

    Read the article

  • accessing live usb files from new hd ubuntu install

    - by Robin Bailey
    After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

    Read the article

  • Ubuntu 11.10 not starting in Graphical mode?

    - by iammilind
    I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

    Read the article

  • How to connect MTS MBlaze on ubuntu 11.04

    - by murali_ma
    i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

    Read the article

  • Network print to brother MFC-7420

    - by trampster
    I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

    Read the article

  • Desktop goes blurry / granulated

    - by Bonfire
    After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

    Read the article

  • Migration a database from 32bit to 64bit

    - by Mike Dietrich
    Database migrations from an 32bit environment to an 64bit environment keeping the same platform architecture (e.g. moving an Oracle 10.2.0.5 database from MS Windows XP 32bit to MS Windows Server 2003 64bit) does not happen that often anymore. But still we see them getting done. And there are a few things to note when doing such a move. First of all the important question is:Will you upgrade your database as part of this move - Yes or No? If you say "Yes" then you are almost done with that topic as we will take care of that bitnes move during the upgrade. The only thing you have to take care is OLAP in case you are using OLAP Option with Analytic Workspaces (AW) by yourself. Those store data in Binary LOBs - and in order to move AWs from 32bit to 64bit you have to export your AWs prior to the move - and import them later on. People who don't use OLAP don't have to take care on this. But if you say "No" (meaning: no upgrade actions involved - you keep your database version) then you have to make sure to invalidate all packages and stored code in the database before you shutdown your database in the 32bit environment and prior to moving it over. And the same rule as above for OLAP applies once you use the OLAP Option. In the source environment: startup upgrade;    -- [or startup migrate; -- for Oracle 9i] @?/rdbms/admin/utlirp.sqlshutdown immediate In the destination environment: startup upgrade @?/olap/admin/xumuts.plb --Only if OLAP Option is installed@?/rdbms/admin/utlrp.sql The script utlirp.sql will invalidate all packages and stored code, utlrp.sql will recompile - and xumuts.plb will rebuild the OLAP Analytic Workspaces in case you have the OLAP Option installed.

    Read the article

  • Problem with alleg42.dll / program crashes / Allegro & Codeblocks

    - by user24152
    I'm having a serious problem with allegro. The program should display random pixels on the screen and when I build and run it I get the following error message: Below is the full code of my program: #include <stdio.h> #include <stdlib.h> #include <time.h> #include "allegro.h" #define Text_Color_Red makecol(255,0,0) int main() { int ret; int color_depth = 32; int x; int y; int red; int green; int blue; int color; //init allegro allegro_init(); //install keyboard install_keyboard(); //set color depth to 32 bits set_color_depth(color_depth); //init random seed srand(time(NULL)); //init video mode to 640 x 480 ret = set_gfx_mode(GFX_AUTODETECT_WINDOWED,640,480,0,0); if(ret !=0) { allegro_message(allegro_error); return 1; } //Display string textprintf(screen,font,0,0,10,0,Text_Color_Red,"Screen Resolution is: %dx%d -- Press ESC to quit !",SCREEN_W,SCREEN_H); //display pixels until ESC key is pressed //wait for keypress while(!key[KEY_ESC]) { //set a random location x = 10 + rand() % (SCREEN_W-20); y = 10 + rand() % (SCREEN_H-20); //set a random color red = rand() % 255; green = rand() % 255; blue = rand() % 255; color = makecol(red,green,blue); //draw the pixel putpixel(screen, x, y, color); } //quit allegro allegro_exit(); } END_OF_MAIN() Error message: AllegroPixels1.exe has encountered a problem and needs to close. We are sorry for the inconvenience. Error signature: AppName: allegropixels1.exe AppVer: 0.0.0.0 ModName: alleg42.dll ModVer: 4.2.3.0 Offset: 0006c05c I am using Windows XP inside a virtual machine under Parallels 7.0

    Read the article

  • Install Ubuntu on Asus Eee-PC 1005PE - Dealing with special partitions

    - by MestreLion
    I have an Asus EeePC 1005PE netbook and im planning on doing a massive re-partitioning (going to install Ubuntu, Mint, XP, etc) Ive noticed it has 2 "special" partitions: a 10Gb Fat32 RESTORE hidden partition (used by BIOS "F9 recovery" feature) and a 16Mb "unknown" partition at the end of the drive (used by BIOS "Boot Booster" feature). So, for both partitions, my question is: Can I move/resize the recovery partition freely? What are the requirements for it? (i mean, for it still be found by BIOS when i press F9/Activate BootBooster?). Partition table order? Partition type? Flags? Label? UUID? Can i make it a Logical (instead of primary) partition? Does it must be the flagged as boot? And, more importantly: where can i find any official documentation about it? Ive ready many (mis)information about it... some say Boot Booster partition must be last (in partition table), some say Recovery must be 2nd, that it must be bootable, etc. How can I know what is really needed for the BIOS to use both F9 and Boot Booster? Note: Im using gParted from a Live USB Stick (Mint 10 / Ubuntu 10.10), and ive noticed that, since the filesystem type of the Boot Booster is not recongnized, it cant move or resize it. Can I delete it and re-create it somewhere else? Whenever i create a 0xEF partition gParted crashes and quits and i cannot open it again (must delete the partition using fdisk / cfdisk)

    Read the article

  • Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

    - by Estel
    A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

    Read the article

  • Working with Active Directory and Windows Small Business Server 2008

    - by AreYouSerious
    I have to say that in most of my time as a network engineer I have had the opportunity to play with servers, but mostly it's been to put our management software on, and that was about it. I have been a Systems Network Engineer for about three months now, and as such I have been respnosible for the configuration of our test devices... this being said, I have had to start working through how to configure and apply such things as GPO through a new forest, domain and OU. This being said I have configured about three different GPO's and applied them to different locations. The first laptop that I brought into the domain took the default Domain group Policy... this was cool, I got excited... then When I tried to bring in the second Laptop, it didn't take the policy. I looked at the configuration, and the default domain policy was applied to domain computers, however since the laptop resides in the SBS Computers of the OU that was created, SBS created individual policies for XP and Vista for that OU, which I was unaware of. So the default policy for that ou overrode the domain policy and none of the options that were defined in the Domain policy were applied... this being said, I am now working on putting the default Domain as an applicable policy in the OU, thus I won't have to reconfigure another policy to mirror the Domain Policy... here goes nothing!!!.... More to follow Later.

    Read the article

  • Samba issue with sharing directories on NTFS/FAT32 (Mounted Drives) ???

    - by Microkernel
    Hi guys, I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two windows-xp machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is = Shared folders on Ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (even if I provide admin login details!!!). I changed workgroup value to the domain_name in office laptop, but still the problem persists... Here is the smdb.conf I am using... [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup Was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail Thanks in advance Regards, Microkernel

    Read the article

  • RetinaPad Enables Retina Display for iPhone Apps on the iPad

    - by Jason Fitzpatrick
    RetinaPad is an iPad application that actives the Retina Display resolution on iPhone applications to increase the clarity on the iPad. It’s a feature that should be built-in but is currently only available for jailbroken iPads. The premise is simple. Currently iPads lack support for the Retina Display level resolution that iPhone apps are capable of if displaying. RetinaPad allows you to stop using the ugly and blocky simple doubling available on the iPad and start accessing the higher resolution Retina Display mode for iPhone applications on the iPad. It’s such a trivial thing that it’s outright shameful Apple doesn’t include it by default. You should have to jailbreak your device to unlock functionality that should be there right from the factory. Check out the demo video below to see it in action: Fire up your jailbroken iPad, launch Cydia and search for RetinaPad. Retina Pad is $2.99, iPad only. How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

    Read the article

  • Never before had a problem with Ubuntu desktop graphical display; Trying to use nvidia GT630

    - by focaccio
    I've been using ubuntu since 9.04 and never had a problem with Ubuntu brining up the desktop graphical user interface. However I am currently not able to see anything graphical past the install screens. I have an Intel DP55KG motherboard and just installed an nvidia gt630 graphics card (zotac), since the old graphics card failed. I can install the server and see text. So I do a apt-get install ubuntu-desktop...or apt-get install kubuntu-desktop...or apt-get install xubuntu desktop, but after the reboot there is no display...its like something is hung up. I tried using the Live quantal dvd and I do see the graphical prompt to try without installing, but after that the screen goes blank. I've tried two monitors and the same thing happens. There is a faint "glow" on the screen and I do not get a "no input signal" from the monitor, so something is happening. I can install an old OEM of XP so I know the video card and motherboard are at least semi functional. Any help is appreciated. Thanks, Greg

    Read the article

  • How do you proactively guard against errors of omission?

    - by Gabriel
    I'll preface this with I don't know if anyone else who's been programming as long as I have actually has this problem, but at the very least, the answer might help someone with less xp. I just stared at this code for 5 minutes, thinking I was losing my mind that it didn't work: var usedNames = new HashSet<string>(); Func<string, string> l = (s) => { for (int i = 0; ; i++) { var next = (s + i).TrimEnd('0'); if (!usedNames.Contains(next)) { return next; } } }; Finally I noticed I forgot to add the used name to the hash set. Similarly, I've spent minutes upon minutes over omitting context.SaveChanges(). I think I get so distracted by the details that I'm thinking about that some really small details become invisible to me - it's almost at the level of mental block. Are there tactics to prevent this? update: a side effect of asking this was fixing the error it would have for i 9 (Thanks!) var usedNames = new HashSet<string>(); Func<string, string> name = (s) => { string result = s; if(usedNames.Contains(s)) for (int i = 1; ; result = s + i++) if (!usedNames.Contains(result)) break; usedNames.Add(result); return result; };

    Read the article

  • Are there any good examples of open source C# projects with a large number of refactorings?

    - by Arjen Kruithof
    I'm doing research into software evolution and C#/.NET, specifically on identifying refactorings from changesets, so I'm looking for a suitable (XP-like) project that may serve as a test subject for extracting refactorings from version control history. Which open source C# projects have undergone large (number of) refactorings? Criteria A suitable project has its change history publicly available, has compilable code at most commits and at least several refactorings applied in the past. It does not have to be well-known, and the code quality or number of bugs is irrelevant. Preferably the code is in a Git or SVN repository. The result of this research will be a tool that automatically creates informative, concise comments for a changeset. This should improve on the common development practice of just not leaving any comments at all. EDIT: As Peter argues, ideally all commit comments would be teleological (goal-oriented). Practically, if a comment is made at all it is often descriptive, merely a summary of the changes. Sadly we're a long way from automatically inferring developer intentions!

    Read the article

  • Ubuntu 14.04 install fails with Via S3 UniChrome Pro graphics

    - by WizardNo.7
    I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(it's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed (which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers. There is some leftover text from the kernel boot still visible, but there is no graphical desktop. After this I have to hard reboot or shut-down. $ lshw -c video *-display UNCLAIMED description: VGA compatible controller product: CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] Vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 32 bits clock: 66MHz capabilities: pm agp agp-2.0 vga_controller bus_master cap_list configuration: latency=64 mingnt=2 resources: memory:f0000000-f3ffffff memory:d1000000-d1ffffff

    Read the article

  • No keyboard after suspend, even after hard reset

    - by subatomics
    all. While I was using a Ubuntu 9.1 live CD, I put the computer (Toshiba Satellite C655) into standby. After I resumed, the keyboard stopped functioning, though the mouse (USB) still worked. I decided to turn off the computer, but after Ubuntu shuts down, it asks you to press "enter" to actually turn the machine off. The keyboard was still dead, so I all I could do was use the on/off switch to power down the computer. Now, when I try to boot the computer, nothing happens. Before this problem, I would see a menu asking me to select an OS (I had Windows 7 and Windows XP installed). I cannot use any emergency measures because I need to press F12 to boot from a CD, and the keyboard is still not working. I tried removing the HD to force a boot from the CD, but it didn't work. I also tried to plug in a USB keyboard, which failed as well. Right now, I have no idea how to fix this. Any ideas? Thanks.

    Read the article

  • Network printer problem with 12.04

    - by G. He
    I had an HP LaserJet 3030 printer connected to an Ubuntu box. It worked fine with 11.10. I was able to print from Ubuntu as well as from Windows and Mac from the home network. About a month or so ago, I upgraded 11.10 to 12.04, then things started to falling apart. My Windows 7 laptop couldn't print to the printer any more. Today, I installed many updates on 12.04, hoping that would fix the printing problem. Unfortunately, it made the situation much worse. Now not only my Windows 7 laptop won't print, my XP desktop won't print either. Every time I print something from the Windows computer, the Ubuntu box logs an error message in /var/log/samba/log.'machineName' as: _spoolss_OpenPrinterEx: Cannot open a printer handle for printer \\server. It is interesting that it uses the server name as the printer, not the \\server\xyzprinter as the printer name. Anyone had a similar problem? Anyway to work around the problem?

    Read the article

  • 12.04 Taking forever for no apparent reason

    - by Sam
    First off, I'd just like to say how much I'm loving Ubuntu so far. It's one of my first steps into Linux, but so far it's blown away Windows in almost every regard. Now, onto my problem. My brothers have some old Dell Dimensions that are barely clinging to life. They were both running XP Home Premium. The 2400 installed just fine, no issues at all. Now, the other computer, the 3000 isn't clearing the screen with the Ubuntu logo and the pulsing dots. I've tried multiple discs, including the exact same one that gave me no issue in the other computer, and I'm at a loss. Does anyone have any suggestions as to where the problem might lay? They're both 32 bit Intel processors, and it's the correct version of Ubuntu. Is it a bad disc drive? Hardware incompatibility? Thanks for any assistance that can be provided. Dell Dimension 2400 Dell Dimension 3000

    Read the article

  • Running Outlook from VB with multiple email addresses [migrated]

    - by Mac
    I am sending emails from my VB6 system and I am having problems with sending a single email to various email addresses. The code is as follows: On Error Resume Next Err.Clear Set oOutLookObject = CreateObject("Outlook.Application") If Err <> 0 Then MsgBox "Email error. Err = " & Err & " Description = " & Err.Description EmailValid = "N" Exit Function End If Set oEmailItem = oOutLookObject.CreateItem(0) If Err <> 0 Then MsgBox "Email error. Err = " & Err & " Description = " & Err.Description EmailValid = "N" Exit Function End If With oEmailItem .Recipients.Add (SMRecipients) .Subject = SMSubject .Importance = IMPORTANCENORMAL .Body = SMBody For i = 1 To 10 If RTrim(SMAttach(i)) <> "" Then .attachments.Add SMAttach(1) 'i) Else Exit For End If Next i .send End With If Err <> 0 Then MsgBox "Email error. Err = " & Err & " Description = " & Err.Description EmailValid = "N" Exit Function End If ''' .Attachments.Add ("c:\temp\test2.txt") Set oOutLookObject = Nothing I have set SMRecipients to a single email address and it is fine but when I add more addresses seperated by semicolons or spaces it only sends to the original address. My system runs under XP. Another point is that it use to find the addresses in the Outlook Address book and where they wetre not specific enough it would display the matching addresses for selection of the correct one. It no longer does this.

    Read the article

  • how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

    - by user211487
    When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

    Read the article

  • Downclock CPU reaching critical temperature

    - by Draga
    I have an HP tx1250 laptop. It always had serious overheating problems and although usually it runs fine I'm now running a continuous test for my dissertation, this brings the CPU temp close to the critical and from time to time the computer shutdown for reaching it (checked the log). I use to have the same problem on Win XP but I noticed Win Vista and 7 downclock the CPU when is necessary to cool it down so I was thinking if the same is possible on Ubuntu 12. The only program I've found that may do the job is computer temp ( http://computertemp.berlios.de/ ) but it doesn't seems to work under Ubuntu 12. The inside of the laptop is fairly clean, the thermal paste is quite recent, I'm keeping it lifted from the desk and judjung by the sound of the fan that's running fine as well. The pc in now running between 78 and 91 degrees C but about once a day it shut down for reaching 95. I need the results of the test it's running pretty soon so it's important that it runs non-stop. I've though to set the maximum clock of the CPU to slightly less the maximum but then these tests I'm running would take much more time. Thanks! PS: first and last HP laptop for me.

    Read the article

  • Software solution from the 2000's, should I attempt to patch or remake the whole thing?

    - by ShadowScripter
    I was sent out to discuss a system that a certain company is currently using and what should be done with it. The company manufactures various carton displays. This system was developed to keep track of clients, orders and prices. Lots have happened since the system was created and the system is now, as the manager described it, "locked up" and "problematic", which I translate as "not dynamic" and "unstable". Some info about the system It was developed around the year 2000 Fairly small system, 2-5 users, 6 forms, ~8 tables with average quantities of data Built on early Visual Basic, forms created with the drag and drop design. Interface is basically just a window with a menu and some forms Uses MSSQL database (SQL2005 server) to store data and ODBC driver to query, data was migrated from excel before this system, and before excel it was handled, calculated and written by hand and paper Users work in Microsoft XP environment (and up) Their main problem is that they can't adjust and calculate prices, can't add new carton types etc, correctly anymore because they can't (or rather, they don't know how to) touch the data on the server. I suggested 3 possible solutions Attempt to patch the current system Create a fresh new interface (preferably similar environment, VB.net or VB based) Bring it back to an Excel solution, considering it is such a small system There might be more options, but these are the ones I could think of. My questions are What should I recommend and why? What is or could be the pros and cons of these alternatives? Are there other (possibly better) alternatives?

    Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >