arrange items - Page 369

Anatomy of a .NET Assembly - CLR metadata 1

- by Simon Cooper

Before we look at the bytes comprising the CLR-specific data inside an assembly, we first need to understand the logical format of the metadata (For this post I only be looking at simple pure-IL assemblies; mixed-mode assemblies & other things complicates things quite a bit). Metadata streams Most of the CLR-specific data inside an assembly is inside one of 5 streams, which are analogous to the sections in a PE file. The name of each section in a PE file starts with a ., and the name of each stream in the CLR metadata starts with a #. All but one of the streams are heaps, which store unstructured binary data. The predefined streams are: #~ Also called the metadata stream, this stream stores all the information on the types, methods, fields, properties and events in the assembly. Unlike the other streams, the metadata stream has predefined contents & structure. #Strings This heap is where all the namespace, type & member names are stored. It is referenced extensively from the #~ stream, as we'll be looking at later. #US Also known as the user string heap, this stream stores all the strings used in code directly. All the strings you embed in your source code end up in here. This stream is only referenced from method bodies. #GUID This heap exclusively stores GUIDs used throughout the assembly. #Blob This heap is for storing pure binary data - method signatures, generic instantiations, that sort of thing. Items inside the heaps (#Strings, #US, #GUID and #Blob) are indexed using a simple binary offset from the start of the heap. At that offset is a coded integer giving the length of that item, then the item's bytes immediately follow. The #GUID stream is slightly different, in that GUIDs are all 16 bytes long, so a length isn't required. Metadata tables The #~ stream contains all the assembly metadata. The metadata is organised into 45 tables, which are binary arrays of predefined structures containing information on various aspects of the metadata. Each entry in a table is called a row, and the rows are simply concatentated together in the file on disk. For example, each row in the TypeRef table contains: A reference to where the type is defined (most of the time, a row in the AssemblyRef table). An offset into the #Strings heap with the name of the type An offset into the #Strings heap with the namespace of the type. in that order. The important tables are (with their table number in hex): 0x2: TypeDef 0x4: FieldDef 0x6: MethodDef 0x14: EventDef 0x17: PropertyDef Contains basic information on all the types, fields, methods, events and properties defined in the assembly. 0x1: TypeRef The details of all the referenced types defined in other assemblies. 0xa: MemberRef The details of all the referenced members of types defined in other assemblies. 0x9: InterfaceImpl Links the types defined in the assembly with the interfaces that type implements. 0xc: CustomAttribute Contains information on all the attributes applied to elements in this assembly, from method parameters to the assembly itself. 0x18: MethodSemantics Links properties and events with the methods that comprise the get/set or add/remove methods of the property or method. 0x1b: TypeSpec 0x2b: MethodSpec These tables provide instantiations of generic types and methods for each usage within the assembly. There are several ways to reference a single row within a table. The simplest is to simply specify the 1-based row index (RID). The indexes are 1-based so a value of 0 can represent 'null'. In this case, which table the row index refers to is inferred from the context. If the table can't be determined from the context, then a particular row is specified using a token. This is a 4-byte value with the most significant byte specifying the table, and the other 3 specifying the 1-based RID within that table. This is generally how a metadata table row is referenced from the instruction stream in method bodies. The third way is to use a coded token, which we will look at in the next post. So, back to the bytes Now we've got a rough idea of how the metadata is logically arranged, we can now look at the bytes comprising the start of the CLR data within an assembly: The first 8 bytes of the .text section are used by the CLR loader stub. After that, the CLR-specific data starts with the CLI header. I've highlighted the important bytes in the diagram. In order, they are: The size of the header. As the header is a fixed size, this is always 0x48. The CLR major version. This is always 2, even for .NET 4 assemblies. The CLR minor version. This is always 5, even for .NET 4 assemblies, and seems to be ignored by the runtime. The RVA and size of the metadata header. In the diagram, the RVA 0x20e4 corresponds to the file offset 0x2e4 Various flags specifying if this assembly is pure-IL, whether it is strong name signed, and whether it should be run as 32-bit (this is how the CLR differentiates between x86 and AnyCPU assemblies). A token pointing to the entrypoint of the assembly. In this case, 06 (the last byte) refers to the MethodDef table, and 01 00 00 refers to to the first row in that table. (after a gap) RVA of the strong name signature hash, which comes straight after the CLI header. The RVA 0x2050 corresponds to file offset 0x250. The rest of the CLI header is mainly used in mixed-mode assemblies, and so is zeroed in this pure-IL assembly. After the CLI header comes the strong name hash, which is a SHA-1 hash of the assembly using the strong name key. After that comes the bodies of all the methods in the assembly concatentated together. Each method body starts off with a header, which I'll be looking at later. As you can see, this is a very small assembly with only 2 methods (an instance constructor and a Main method). After that, near the end of the .text section, comes the metadata, containing a metadata header and the 5 streams discussed above. We'll be looking at this in the next post. Conclusion The CLI header data doesn't have much to it, but we've covered some concepts that will be important in later posts - the logical structure of the CLR metadata and the overall layout of CLR data within the .text section. Next, I'll have a look at the contents of the #~ stream, and how the table data is arranged on disk.

Read the article

PowerShell Script to Enumerate SharePoint 2010 or 2013 Permissions and Active Directory Group Membership

- by Brian T. Jackett

Originally posted on: http://geekswithblogs.net/bjackett/archive/2013/07/01/powershell-script-to-enumerate-sharepoint-2010-or-2013-permissions-and.aspx In this post I will present a script to enumerate SharePoint 2010 or 2013 permissions across the entire farm down to the site (SPWeb) level. As a bonus this script also recursively expands the membership of any Active Directory (AD) group including nested groups which you wouldn’t be able to find through the SharePoint UI. History Back in 2009 (over 4 years ago now) I published one my most read blog posts about enumerating SharePoint 2007 permissions. I finally got around to updating that script to remove deprecated APIs, supporting the SharePoint 2010 commandlets, and fixing a few bugs. There are 2 things that script did that I had to remove due to major architectural or procedural changes in the script. Indenting the XML output Ability to search for a specific user I plan to add back the ability to search for a specific user but wanted to get this version published first. As for indenting the XML that could be added but would take some effort. If there is user demand for it (let me know in the comments or email me using the contact button at top of blog) I’ll move it up in priorities. As a side note you may also notice that I’m not using the Active Directory commandlets. This was a conscious decision since not all environments have them available. Instead I’m relying on the older [ADSI] type accelerator and APIs. It does add a significant amount of code to the script but it is necessary for compatibility. Hopefully in a few years if I need to update again I can remove that legacy code. Solution Below is the script to enumerate SharePoint 2010 and 2013 permissions down to site level. You can also download it from my SkyDrive account or my posting on the TechNet Script Center Repository. SkyDrive TechNet Script Center Repository http://gallery.technet.microsoft.com/scriptcenter/Enumerate-SharePoint-2010-35976bdb 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 ########################################################### #DisplaySPWebApp8.ps1 # #Author: Brian T. Jackett #Last Modified Date: 2013-07-01 # #Traverse the entire web app site by site to display # hierarchy and users with permissions to site. ########################################################### function Expand-ADGroupMembership { Param ( [Parameter(Mandatory=$true, Position=0)] [string] $ADGroupName, [Parameter(Position=1)] [string] $RoleBinding ) Process { $roleBindingText = "" if(-not [string]::IsNullOrEmpty($RoleBinding)) { $roleBindingText = " RoleBindings=`"$roleBindings`"" } Write-Output "<ADGroup Name=`"$($ADGroupName)`"$roleBindingText>" $domain = $ADGroupName.substring(0, $ADGroupName.IndexOf("\") + 1) $groupName = $ADGroupName.Remove(0, $ADGroupName.IndexOf("\") + 1) #BEGIN - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY #http://www.microsoft.com/technet/scriptcenter/scripts/powershell/search/users/srch106.mspx #GET AD GROUP FROM DIRECTORY SERVICES SEARCH $strFilter = "(&(objectCategory=Group)(name="+($groupName)+"))" $objDomain = New-Object System.DirectoryServices.DirectoryEntry $objSearcher = New-Object System.DirectoryServices.DirectorySearcher $objSearcher.SearchRoot = $objDomain $objSearcher.Filter = $strFilter # specify properties to be returned $colProplist = ("name","member","objectclass") foreach ($i in $colPropList) { $catcher = $objSearcher.PropertiesToLoad.Add($i) } $colResults = $objSearcher.FindAll() #END - CODE ADAPTED FROM SCRIPT CENTER SAMPLE CODE REPOSITORY foreach ($objResult in $colResults) { if($objResult.Properties["Member"] -ne $null) { foreach ($member in $objResult.Properties["Member"]) { $indMember = [adsi] "LDAP://$member" $fullMemberName = $domain + ($indMember.Name) #if($indMember["objectclass"] # if child AD group continue down chain if(($indMember | Select-Object -ExpandProperty objectclass) -contains "group") { Expand-ADGroupMembership -ADGroupName $fullMemberName } elseif(($indMember | Select-Object -ExpandProperty objectclass) -contains "user") { Write-Output "<ADUser>$fullMemberName</ADUser>" } } } } Write-Output "</ADGroup>" } } #end Expand-ADGroupMembership # main portion of script if((Get-PSSnapin -Name microsoft.sharepoint.powershell) -eq $null) { Add-PSSnapin Microsoft.SharePoint.PowerShell } $farm = Get-SPFarm Write-Output "<Farm Guid=`"$($farm.Id)`">" $webApps = Get-SPWebApplication foreach($webApp in $webApps) { Write-Output "<WebApplication URL=`"$($webApp.URL)`" Name=`"$($webApp.Name)`">" foreach($site in $webApp.Sites) { Write-Output "<SiteCollection URL=`"$($site.URL)`">" foreach($web in $site.AllWebs) { Write-Output "<Site URL=`"$($web.URL)`">" # if site inherits permissions from parent then stop processing if($web.HasUniqueRoleAssignments -eq $false) { Write-Output "" } # else site has unique permissions else { foreach($assignment in $web.RoleAssignments) { if(-not [string]::IsNullOrEmpty($assignment.Member.Xml)) { $roleBindings = ($assignment.RoleDefinitionBindings | Select-Object -ExpandProperty name) -join "," # check if assignment is SharePoint Group if($assignment.Member.XML.StartsWith('<Group') -eq "True") { Write-Output "<SPGroup Name=`"$($assignment.Member.Name)`" RoleBindings=`"$roleBindings`">" foreach($SPGroupMember in $assignment.Member.Users) { # if SharePoint group member is an AD Group if($SPGroupMember.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $SPGroupMember.Name } # else SharePoint group member is an AD User else { # remove claim portion of user login #Write-Output "<ADUser>$($SPGroupMember.UserLogin.Remove(0,$SPGroupMember.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser>$($SPGroupMember.UserLogin)</ADUser>" } } Write-Output "</SPGroup>" } # else an indivdually listed AD group or user else { if($assignment.Member.IsDomainGroup) { Expand-ADGroupMembership -ADGroupName $assignment.Member.Name -RoleBinding $roleBindings } else { # remove claim portion of user login #Write-Output "<ADUser>$($assignment.Member.UserLogin.Remove(0,$assignment.Member.UserLogin.IndexOf("|") + 1))</ADUser>" Write-Output "<ADUser RoleBindings=`"$roleBindings`">$($assignment.Member.UserLogin)</ADUser>" } } } } } Write-Output "</Site>" $web.Dispose() } Write-Output "</SiteCollection>" $site.Dispose() } Write-Output "</WebApplication>" } Write-Output "</Farm>" The output from the script can be sent to an XML which you can then explore using the [XML] type accelerator. This lets you explore the XML structure however you see fit. See the screenshot below for an example. If you do view the XML output through a text editor (Notepad++ for me) notice the format. Below we see a SharePoint site that has a SharePoint group Demo Members with Edit permissions assigned. Demo Members has an AD group corp\developers as a member. corp\developers has a child AD group called corp\DevelopersSub with 1 AD user in that sub group. As you can see the script recursively expands the AD hierarchy. Conclusion It took me 4 years to finally update this script but I‘m happy to get this published. I was able to fix a number of errors and smooth out some rough edges. I plan to develop this into a more full fledged tool over the next year with more features and flexibility (copy permissions, search for individual user or group, optional enumerate lists / items, etc.). If you have any feedback, feature requests, or issues running it please let me know. Enjoy the script! -Frog Out

Read the article

SQL SERVER – Data Sources and Data Sets in Reporting Services SSRS

- by Pinal Dave

This example is from the Beginning SSRS by Kathi Kellenberger. Supporting files are available with a free download from the www.Joes2Pros.com web site. This example is from the Beginning SSRS. Supporting files are available with a free download from the www.Joes2Pros.com web site. Connecting to Your Data? When I was a child, the telephone book was an important part of my life. Maybe I was just a nerd, but I enjoyed getting a new book every year to page through to learn about the businesses in my small town or to discover where some of my school acquaintances lived. It was also the source of maps to my town’s neighborhoods and the towns that surrounded me. To make a phone call, I would need a telephone number. In order to find a telephone number, I had to know how to use the telephone book. That seems pretty simple, but it resembles connecting to any data. You have to know where the data is and how to interact with it. A data source is the connection information that the report uses to connect to the database. You have two choices when creating a data source, whether to embed it in the report or to make it a shared resource usable by many reports. Data Sources and Data Sets A few basic terms will make the upcoming choses make more sense. What database on what server do you want to connect to? It would be better to just ask… “what is your data source?” The connection you need to make to get your reports data is called a data source. If you connected to a data source (like the JProCo database) there may be hundreds of tables. You probably only want data from just a few tables. This means you want to write a specific query against this data source. A query on a data source to get just the records you need for an SSRS report is called a Data Set. Creating a local Data Source You can connect embed a connection from your report directly to your JProCo database which (let’s say) is installed on a server named Reno. If you move JProCo to a new server named Tampa then you need to update the Data Set. If you have 10 reports in one project that were all pointing to the JProCo database on the Reno server then they would all need to be updated at once. It’s possible to make a project level Data Source and have each report use that. This means one change can fix all 10 reports at once. This would be called a Shared Data Source. Creating a Shared Data Source The best advice I can give you is to create shared data sources. The reason I recommend this is that if a database moves to a new server you will have just one place in Report Manager to make the server name change. That one change will update the connection information in all the reports that use that data source. To get started, you will start with a fresh project. Go to Start > All Programs > SQL Server 2012 > Microsoft SQL Server Data Tools to launch SSDT. Once SSDT is running, click New Project to create a new project. Once the New Project dialog box appears, fill in the form, as shown in. Be sure to select Report Server Project this time – not the wizard. Click OK to dismiss the New Project dialog box. You should now have an empty project, as shown in the Solution Explorer. A report is meant to show you data. Where is the data? The first task is to create a Shared Data Source. Right-click on the Shared Data Sources folder and choose Add New Data Source. The Shared Data Source Properties dialog box will launch where you can fill in a name for the data source. By default, it is named DataSource1. The best practice is to give the data source a more meaningful name. It is possible that you will have projects with more than one data source and, by naming them, you can tell one from another. Type the name JProCo for the data source name and click the Edit button to configure the database connection properties. If you take a look at the types of data sources you can choose, you will see that SSRS works with many data platforms including Oracle, XML, and Teradata. Make sure SQL Server is selected before continuing. For this post, I am assuming that you are using a local SQL Server and that you can use your Windows account to log in to the SQL Server. If, for some reason you must use SQL Server Authentication, choose that option and fill in your SQL Server account credentials. Otherwise, just accept Windows Authentication. If your database server was installed locally and with the default instance, just type in Localhost for the Server name. Select the JProCo database from the database list. At this point, the connection properties should look like. If you have installed a named instance of SQL Server, you will have to specify the server name like this: Localhost\InstanceName, replacing the InstanceName with whatever your instance name is. If you are not sure about the named instance, launch the SQL Server Configuration Manager found at Start > All Programs > Microsoft SQL Server 2012 > Configuration Tools. If you have a named instance, the name will be shown in parentheses. A default instance of SQL Server will display MSSQLSERVER; a named instance will display the name chosen during installation. Once you get the connection properties filled in, click OK to dismiss the Connection Properties dialog box and OK again to dismiss the Shared Data Source properties. You now have a data source in the Solution Explorer. What’s next I really need to thank Kathi Kellenberger and Rick Morelan for sharing this material for this 5 day series of posts on SSRS. To get really comfortable with SSRS you will get to know the different SSDT windows, Build reports on your own (without the wizards), Add report headers and footers, Accept user input, create levels, charts, or even maps for visual appeal. You might be surprise to know a small 230 page book starts from the very beginning and covers the steps to do all these items. Beginning SSRS 2012 is a small easy to follow book so you can learn SSRS for less than $20. See Joes2Pros.com for more on this and other books. If you want to learn SSRS in easy to simple words – I strongly recommend you to get Beginning SSRS book from Joes 2 Pros. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Reporting Services, SSRS

Read the article

Self-signed certificates for a known community

- by costlow

Recently announced changes scheduled for Java 7 update 51 (January 2014) have established that the default security slider will require code signatures and the Permissions Manifest attribute. Code signatures are a common practice recommended in the industry because they help determine that the code your computer will run is the same code that the publisher created. This post is written to help users that need to use self-signed certificates without involving a public Certificate Authority. The role of self-signed certificates within a known community You may still use self-signed certificates within a known community. The difference between self-signed and purchased-from-CA is that your users must import your self-signed certificate to indicate that it is valid, whereas Certificate Authorities are already trusted by default. This works for known communities where people will trust that my certificate is mine, but does not scale widely where I cannot actually contact or know the systems that will need to trust my certificate. Public Certificate Authorities are widely trusted already because they abide by many different requirements and frequent checks. An example would be students in a university class sharing their public certificates on a mailing list or web page, employees publishing on the intranet, or a system administrator rolling certificates out to end-users. Managed machines help this because you can automate the rollout, but they are not required -- the major point simply that people will trust and import your certificate. How to distribute self-signed certificates for a known community There are several steps required to distribute a self-signed certificate to users so that they will properly trust it. These steps are: Creating a public/private key pair for signing. Exporting your public certificate for others Importing your certificate onto machines that should trust you Verify work on a different machine Creating a public/private key pair for signing Having a public/private key pair will give you the ability both to sign items yourself and issue a Certificate Signing Request (CSR) to a certificate authority. Create your public/private key pair by following the instructions for creating key pairs.Every Certificate Authority that I looked at provided similar instructions, but for the sake of cohesiveness I will include the commands that I used here: Generate the key pair.keytool -genkeypair -alias erikcostlow -keyalg EC -keysize 571 -validity 730 -keystore javakeystore_keepsecret.jks Provide a good password for this file. The alias "erikcostlow" is my name and therefore easy to remember. Substitute your name of something like "mykey." The sigalg of EC (Elliptical Curve) and keysize of 571 will give your key a good strong lifetime. All keys are set to expire. Two years or 730 days is a reasonable compromise between not-long-enough and too-long. Most public Certificate Authorities will sign something for one to five years. You will be placing your keys in javakeystore_keepsecret.jks -- this file will contain private keys and therefore should not be shared. If someone else gets these private keys, they can impersonate your signature. Please be cautious about automated cloud backup systems and private key stores. Answer all the questions. It is important to provide good answers because you will stick with them for the "-validity" days that you specified above.What is your first and last name? [Unknown]: First LastWhat is the name of your organizational unit? [Unknown]: Line of BusinessWhat is the name of your organization? [Unknown]: MyCompanyWhat is the name of your City or Locality? [Unknown]: City NameWhat is the name of your State or Province? [Unknown]: CAWhat is the two-letter country code for this unit? [Unknown]: USIs CN=First Last, OU=Line of Business, O=MyCompany, L=City, ST=CA, C=US correct? [no]: yesEnter key password for <erikcostlow> (RETURN if same as keystore password): Verify your work:keytool -list -keystore javakeystore_keepsecret.jksYou should see your new key pair. Exporting your public certificate for others Public Key Infrastructure relies on two simple concepts: the public key may be made public and the private key must be private. By exporting your public certificate, you are able to share it with others who can then import the certificate to trust you. keytool -exportcert -keystore javakeystore_keepsecret.jks -alias erikcostlow -file erikcostlow.cer To verify this, you can open the .cer file by double-clicking it on most operating systems. It should show the information that you entered during the creation prompts. This is the file that you will share with others. They will use this certificate to prove that artifacts signed by this certificate came from you. If you do not manage machines directly, place the certificate file on an area that people within the known community should trust, such as an intranet page. Import the certificate onto machines that should trust you In order to trust the certificate, people within your known network must import your certificate into their keystores. The first step is to verify that the certificate is actually yours, which can be done through any band: email, phone, in-person, etc. Known networks can usually do this Determine the right keystore: For an individual user looking to trust another, the correct file is within that user’s directory.e.g. USER_HOME\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs For system-wide installations, Java’s Certificate Authorities are in JAVA_HOMEe.g. C:\Program Files\Java\jre8\lib\security\cacerts File paths for Mac and Linux are included in the link above. Follow the instructions to import the certificate into the keystore. keytool -importcert -keystore THEKEYSTOREFROMABOVE -alias erikcostlow -file erikcostlow.cer In this case, I am still using my name for the alias because it’s easy for me to remember. You may also use an alias of your company name. Scaling distribution of the import The easiest way to apply your certificate across many machines is to just push the .certs or cacerts file onto them. When doing this, watch out for any changes that people would have made to this file on their machines. Trusted.certs: When publishing into user directories, your file will overwrite any keys that the user has added since last update. CACerts: It is best to re-run the import command with each installation rather than just overwriting the file. If you just keep the same cacerts file between upgrades, you will overwrite any CAs that have been added or removed. By re-importing, you stay up to date with changes. Verify work on a different machine Verification is a way of checking on the client machine to ensure that it properly trusts signed artifacts after you have added your signing certificate. Many people have started using deployment rule sets. You can validate the deployment rule set by: Create and sign the deployment rule set on the computer that holds the private key. Copy the deployment rule set on to the different machine where you have imported the signing certificate. Verify that the Java Control Panel’s security tab shows your deployment rule set. Verifying an individual JAR file or multiple JAR files You can test a certificate chain by using the jarsigner command. jarsigner -verify filename.jar If the output does not say "jar verified" then run the following command to see why: jarsigner -verify -verbose -certs filename.jar Check the output for the term “CertPath not validated.”

Read the article

Rebuilding CoasterBuzz, Part III: The architecture using the "Web stack of love"

- by Jeff

This is the third post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch in the next month or two. More: Part I: Evolution, and death to WCF Part II: Hot data objects I finally hit a point in the re-do of CoasterBuzz where I feel like the major pieces are in place... rewritten, ported and what not, so that I can focus now on front-end design and more interesting creative problems. I've been asked on more than one occasion (OK, just twice) what's going on under the covers, so I figure this might be a good time to explain the overall architecture. As it turns out, I'm using a whole lof of the "Web stack of love," as Scott Hanselman likes to refer to it. Oh that Hanselman. First off, at the center of it all, is BizTalk. Just kidding. That's "enterprise architecture" humor, where every discussion starts with how they'll use BizTalk. Here are the bigger moving parts: It's fairly straight forward. A common library lives in a number of Web apps, all of which are (or will be) powered by ASP.NET MVC 4. They all talk to the same database. There is the main Web site, which also has the endpoint for the Silverlight-based Feed app. The cstr.bz site handles redirects, which are generated when news items are published and sent to Twitter. Facebook publishing is handled via the RSS Graffiti Facebook app. The API site handles requests from the Windows Phone app. The main site depends very heavily on POP Forums, the open source, MVC-based forum I maintain. It serves a number of functions, primarily handling users. These user objects serve in non-forum roles to handle things like news and database contributions, maintaining track records (coaster nerd for "list of rides I've been on") and, perhaps most importantly, paid club memberships. Before I get into more specifics, note that the "glue" for everything is Ninject, the dependency injection framework. I actually prefer StructureMap these days, but I started with Ninject in POP Forums a long time ago. POP Forums has a static class, PopForumsActivation, that new's up an instance of the container, and you can call it from where ever. The downside is that the forums require Ninject in your MVC app as the default dependency resolver. At some point, I'll decouple it, but for now it's not in the way. In the general sense, the entire set of apps follow a repository-service-controller-view pattern. Repos just do data access, service classes do business logic, controllers compose and route, views view. The forum also provides Scoring Game functionality. The Scoring Game is a reasonably abstract framework to award users points based on certain actions, and then award achievements when a certain number of point events happen. For example, the forum already awards a point when someone plus-one's a post you made. You can set up an achievement that says, "Give the user an award when they've had 100 posts plus'd." It also does zero-point entries into the ledger, so if you make a post, you could award an achievement based on 100 posts made. Wiring in the scoring game to CoasterBuzz functionality is just a matter of going to the Ninject container and getting an instance of the event publisher, and passing it events. Forum adapters were introduced into POP Forums a few versions ago, and they can intercept the model generated for forum topic lists and threads and designate an alternate view. These are used to make the "Day in Pictures" forum, where users can upload photos as frame-by-frame photo threads. Another adapter adds an association UI, so users can associate specific amusement parks with their trip report posts. The Silverlight-based Feed app talks to a simple JSON endpoint in the main app. This uses an underlying library I wrote ages ago, simply called Feeds, that aggregates event information. You inherit from a base class that creates instances of a publisher interface, and then use that class to send it an event type and any number of data fields. Feeds has two publishers: One is to the database, and that's used for the endpoint that talks to the Silverlight app. The second publisher publishes to Twitter, if the event is of the type "news." The wiring is a little strange, because for the new posts and topics events, I'm actually pulling out the forum repository classes from the Ninject container and replacing them with overridden methods to publish. I should probably be doing this at the service class level, but whatever. It's my mess. cstr.bz doesn't do anything interesting. It looks up the path, and if it has a match, does a 301 redirect to the long URL. The API site just serves up JSON for the Windows Phone app. The Windows Phone app is Silverlight, of course, and there isn't much to it. It does use the control toolkit, but beyond that, it relies on a simple class that creates a Webclient and calls the server for JSON to deserialize. The same class is now used by the Feed app, which used to use WCF. Simple is better. Data access in POP Forums is all straight SQL, because a lot of it was ported from the ASP.NET version. Most CoasterBuzz data access is handled by the Entity Framework, using the code-first model. The context class in this case does a lot of work to make sure that the table and key mapping works, since much of it breaks from the normal conventions of EF. One of the more powerful things you can do with EF, once you understand the little gotchas, is split tables by row into different entities. For example, a roller coaster photo has everything in the same row, including the metadata, the thumbnail bytes and the image itself. Obviously, if you want to get a list of photos to iterate over in a view, you don't want to get the image data. The use of navigation properties makes it easier to get just what you want. The front end includes Razor views in MVC, and jQuery is used for client-side goodness. I'm also using jQuery UI in a few places, for tabs, a dialog box and autocomplete. I'm also, tentatively, using jQuery Mobile. I've already ported most forum views to Mobile, but they need some work as v1.1 isn't finished yet. I'm not sure if I'll ship CoasterBuzz with mobile views or not yet. It's on the radar, but not something in my delivery criteria. That covers all of the big frameworks in play. Next time I hope to talk more about the front-end experience, which to me is where most of the fun is these days. Hoping to launch in the next month or two. Getting tired of looking at the old site!

Read the article

Full-text Indexing Books Online

- by Most Valuable Yak (Rob Volk)

While preparing for a recent SQL Saturday presentation, I was struck by a crazy idea (shocking, I know): Could someone import the content of SQL Server Books Online into a database and apply full-text indexing to it? The answer is yes, and it's really quite easy to do. The first step is finding the installed help files. If you have SQL Server 2012, BOL is installed under the Microsoft Help Library. You can find the install location by opening SQL Server Books Online and clicking the gear icon for the Help Library Manager. When the new window pops up click the Settings link, you'll get the following: You'll see the path under Library Location. Once you navigate to that path you'll have to drill down a little further, to C:\ProgramData\Microsoft\HelpLibrary\content\Microsoft\store. This is where the help file content is kept if you downloaded it for offline use. Depending on which products you've downloaded help for, you may see a few hundred files. Fortunately they're named well and you can easily find the "SQL_Server_Denali_Books_Online_" files. We are interested in the .MSHC files only, and can skip the Installation and Developer Reference files. Despite the .MHSC extension, these files are compressed with the standard Zip format, so your favorite archive utility (WinZip, 7Zip, WinRar, etc.) can open them. When you do, you'll see a few thousand files in the archive. We are only interested in the .htm files, but there's no harm in extracting all of them to a folder. 7zip provides a command-line utility and the following will extract to a D:\SQLHelp folder previously created: 7z e –oD:\SQLHelp "C:\ProgramData\Microsoft\HelpLibrary\content\Microsoft\store\SQL_Server_Denali_Books_Online_B780_SQL_110_en-us_1.2.mshc" *.htm Well that's great Rob, but how do I put all those files into a full-text index? I'll tell you in a second, but first we have to set up a few things on the database side. I'll be using a database named Explore (you can certainly change that) and the following setup is a fragment of the script I used in my presentation: USE Explore; GO CREATE SCHEMA help AUTHORIZATION dbo; GO -- Create default fulltext catalog for later FT indexes CREATE FULLTEXT CATALOG FTC AS DEFAULT; GO CREATE TABLE help.files(file_id int not null IDENTITY(1,1) CONSTRAINT PK_help_files PRIMARY KEY, path varchar(256) not null CONSTRAINT UNQ_help_files_path UNIQUE, doc_type varchar(6) DEFAULT('.xml'), content varbinary(max) not null); CREATE FULLTEXT INDEX ON help.files(content TYPE COLUMN doc_type LANGUAGE 1033) KEY INDEX PK_help_files; This will give you a table, default full-text catalog, and full-text index on that table for the content you're going to insert. I'll be using the command line again for this, it's the easiest method I know: for %a in (D:\SQLHelp\*.htm) do sqlcmd -S. -E -d Explore -Q"set nocount on;insert help.files(path,content) select '%a', cast(c as varbinary(max)) from openrowset(bulk '%a', SINGLE_CLOB) as c(c)" You'll need to copy and run that as one line in a command prompt. I'll explain what this does while you run it and watch several thousand files get imported: The "for" command allows you to loop over a collection of items. In this case we want all the .htm files in the D:\SQLHelp folder. For each file it finds, it will assign the full path and file name to the %a variable. In the "do" clause, we'll specify another command to be run for each iteration of the loop. I make a call to "sqlcmd" in order to run a SQL statement. I pass in the name of the server (-S.), where "." represents the local default instance. I specify -d Explore as the database, and -E for trusted connection. I then use -Q to run a query that I enclose in double quotes. The query uses OPENROWSET(BULK…SINGLE_CLOB) to open the file as a data source, and to treat it as a single character large object. In order for full-text indexing to work properly, I have to convert the text content to varbinary. I then INSERT these contents along with the full path of the file into the help.files table created earlier. This process continues for each file in the folder, creating one new row in the table. And that's it! 5 SQL Statements and 2 command line statements to unzip and import SQL Server Books Online! In case you're wondering why I didn't use FILESTREAM or FILETABLE, it's simply because I haven't learned them…yet. I may return to this blog after I figure that out and update it with the steps to do so. I believe that will make it even easier. In the spirit of exploration, I'll leave you to work on some fulltext queries of this content. I also recommend playing around with the sys.dm_fts_xxxx DMVs (I particularly like sys.dm_fts_index_keywords, it's pretty interesting). There are additional example queries in the download material for my presentation linked above. Many thanks to Kevin Boles (t) for his advice on (re)checking the content of the help files. Don't let that .htm extension fool you! The 2012 help files are actually XML, and you'd need to specify '.xml' in your document type column in order to extract the full-text keywords. (You probably noticed this in the default definition for the doc_type column.) You can query sys.fulltext_document_types to get a complete list of the types that can be full-text indexed. I also need to thank Hilary Cotter for giving me the original idea. I believe he used MSDN content in a full-text index for an article from waaaaaaaaaaay back, that I can't find now, and had forgotten about until just a few days ago. He is also co-author of Pro Full-Text Search in SQL Server 2008, which I highly recommend. He also has some FTS articles on Simple Talk: http://www.simple-talk.com/sql/learn-sql-server/sql-server-full-text-search-language-features/ http://www.simple-talk.com/sql/learn-sql-server/sql-server-full-text-search-language-features,-part-2/

Read the article

CodePlex Daily Summary for Tuesday, July 02, 2013

CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

Read the article

CodePlex Daily Summary for Sunday, September 02, 2012

CodePlex Daily Summary for Sunday, September 02, 2012Popular ReleasesThisismyusername's codeplex page.: HTML5 Multitouch Example - Fruit Ninja in HTML5: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. This example isn't responsive enough, so I will be working on that, and it doesn't have great graphics, either. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but here the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixRuminate XNA 4.0 GUI: Release 1.1.1: Fixed bugs with Slider and TextBox. Added ComboBox.Confuser: Confuser build 76542: This is a build of changeset 76542.SharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0.0901.1830 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install ...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....New ProjectsATSV: this is a student project for making a new silverlight UI Bookmark Collector: This project is a best practice example of how to use content items in DotNetNuke. It allows you to quickly and easily manage a listing of external links.BPVotingmachine: BP Vote SystemClean My Space: Sort your files in a fun and fast! With Clean My Space you can!CutePlatform: CutePlatform is a platform game based around the PlanetCute graphics pack from Daniel cook, make him a visit in www.lostgardem.comDancTeX: This project is targeting the integration of LaTeX into VisusalStudio. Epi Info™ Companion for Android: A mobile companion to the Epi Info™ 7 desktop tool for epidemiologic data collection and analysis.Flucene: Object Document Mapper for Lucene.Netfluentserializer: FluentSerializer is a library for .NET usable to create serialize/deserialize data through its fluent interface. The methods it creates are compiled.hongjiapp: hongjiappidealthings educational comprehensive administration system: ?????????????????????????????????????????????.Java Accounting Library: The project aims at providing a Financial Accounting Java Library which may be integrated to any other Java Application independent of its Backend Database.mycnblogs: mycnblogsNETPack: Lightweight and flexible packer for .NETRandom Useful Code: This project is where I will store various useful classes I have built over time. Only the code will be provided, no Library or the like.Suleymaniye Tavimi: Namaz vakitleri hesaplama uygulamasidir. Istenilen yer için hesaplama yapar.

Read the article

Clarity is important, both in question and in answer.

- by gerrylowry

clarity is important ... i'm often reminded of the Clouseau movie in which Peter Sellers as Chief Inspector Clouseau asks a hotel clerk "Does your dog bite?" ... the clerk answers "no" ... after Clouseau has been bitten by the dog, he looks at the hotel clerk who says "That's not my dog". Clarity is important, both in question and in answer. i've been a member of forums.asp.net since 2008 ... like many of my peers at forums.asp.net, i've answered my fair share of questions. FWIW, the purpose of this, my first web log post to http://weblogs.asp.net/gerrylowry is to help new members ask better questions and in turn get better answers. TIMTOWTDI =. there is more than one way to do it imho, the best way to ask a question in any forum, or even person to person, is to first formulate your question and then ask yourself to answer your own question. Things to consider when asking (the more complete your question, the more likely you'll get the answer you require): -- have you searched Google and/or your favourite search engine(s) before posting your question to forums.asp.net; examples: site:msdn.microsoft.com entity framework 5.0 c#http://lmgtfy.com/?q=site%3Amsdn.microsoft.com+entity+framework+5.0+c%23 site:forums.asp.net MVC tutorial c#http://lmgtfy.com/?q=site%3Aforums.asp.net+MVC+tutorial+c%23 -- are you asking your question in the correct forum? look at the forums' descriptions at http://forums.asp.net/; examples: Getting Started If you have a general ASP.NET question on a topic that's not covered by one of the other more specific forums - ask it here. MVC Discussions regarding ASP.NET Model-View-Controller (MVC) C# Questions about using C# for ASP.NET development Note: if your question pertains more to c# than to MVC, choosing the C# forum is likely to be more appropriate. -- is your post subject clear and concise, yet not too vague? compare these three subjects (all three had something to do with GridView): (1) please help (2) gridview (3) How to show newline in GridView -- have you clearly explained your scenario? compare: my leg hurts with when i walk too much, my right knee hurts in the knee joint compare: my code does not work with when i enter a date as 2012-11-8, i get a FormatException -- have you checked your spelling, your grammar, and your English? for better or worse, English is the language of forums.asp.net ... many of the currently 170000++ forums.asp.net are not native speakers of English; that's okay ... however, there are times when choosing the more appropriate words will likely get one a better answer; fortunately, there are web tools to help you formulate your question, for example, http://translate.google.com/. -- have you provided relevant information about your environment? here are a few examples ... feel free to include other items to your question ... rule of thumb: if you think a given detail is relevant, it likely is -- what technology are you using? ASP.NET MVC 4, ASP.NET MVC 3, WebForms, ... -- what version of Visual Studio are you using? vs2012 (ultimate, professional, express), vs2010, vs2008 ... -- are you hosting your own website? are you using a shared hosting service? -- are you experience difficulties in just one browser? more than one browser? -- what browser version(s) are you using? ie8? ie9? ... -- what is your operating system? win8, win7, vista, XP, server 2008 R2 ... -- what is your database? SQL Server 2008 R2, ss2005, MySQL, Oracle, ... -- what is your web server? iis 7.5, iis 6, .... -- have you provided enough information for someone to be able to answer your question? Here's an actual example from an O.P. that i hope is self-explanatory: I'm trying to make a simple calculator when i write the code in windows application it worked when i tried it in web application it doesn't work and there are no errors what should i do ??!! -- have you included unnecessary information? more than once, i've seen the O.P. (original post, original poster) include many extra lines of code that were not relevant to the actual question; the more unnecessary code that you include, the less likely your volunteer peers will be motivated to donate their time to help you. -- have you asked the question that you want answered? "Does this dog bite?" -- are your expectations reasonable? -- generally, persons who are going to answer your questions are your peers ... they are unpaid volunteers ... -- are you looking for help with your homework, work assignment, or hobby? or, are you expecting someone else to do your work for you? -- do you expect a complete solution or are you simply looking for guidance and direction? -- you are likely to get more help by first making a reasonable effort to help yourself first Clarity is important, both in question and in answer. if you are answering someone else's question, please remember that clear answers are just as important as clear questions; would you understand your own answer? Things to consider when answering: -- have you tested your code example? if you have, say so; if you've not tested your code example, also say so -- imho, it's okay to guess as long as you clearly state that you're guessing ... sometimes a wrong guess can still help the O.P. find her/his way to the right answer -- meanness does not contribute to being helpful; sometimes one may become frustrated with the O.P. and/or others participating in a thread, if that happens to you, be kind regardless; speaking from my own experience, at least once i've allowed myself to be frustrated into writing something inappropriate that i've regretted later ... being a meany does not feel good ... being kind and helpful feels fantastic! Tip: before asking your question, read more than a few existing questions and answers to get a sense of how your peers ask and answer questions. Gerry P.S.: try to avoid necroposting and piggy backing. necroposting is adding to an old post, especially one that was resolved months ago. piggy backing is adding your own question to someone else's thread.

Read the article

Master Data

- by david.butler(at)oracle.com

Let's take a deeper look at what we mean when we talk about 'Master' data. In its most general sense, master data is data that exists in more than one operational application. These are the applications that automate business processes. These applications require significant amounts of data to function correctly. This includes data about the objects that are involved in transactions, as well as the transaction data itself. For example, when a customer buys a product, the transaction is managed by a sales application. The objects of the transaction are the Customer and the Product. The transactional data is the time, place, price, discount, payment methods, etc. used at the point of sale. Many thousands of transactional data attributes are needed within the application. These important data elements are local to the applications and have no bearing on other applications. Harmonization and synchronization across applications is not necessary. The Customer and Product objects of the transaction also have a large number of attributes. Customer for example, includes hierarchies, hierarchical and matrixed relationships, contacts, classifications, preferences, accounts, identifiers, profiles, and addresses galore for 'ship to', 'mail to'; 'service at'; etc. Dozens of attributes exist for individuals, hundreds for organizations, and thousands for products. This data has meaning beyond any particular application. It exists in many applications and drives the vital cross application enterprise business processes. These are the processes that define and differentiate the organization. At every decision point, information about the objects of the process determines the direction of the process flow. This is the nature of the data that exists in more than one application, and this is why we call it 'master data'. Let me elaborate. Parties Oracle has developed a party schema to model all participants in your daily business operations. It models people, organizations, groups, customers, contacts, employees, and suppliers. It models their accounts, locations, classifications, and preferences. And most importantly, it models the vast array of hierarchical and matrixed relationships that exist between all the participants in your real world operations. The model logically separates people and organizations from their relationships and accounts. This separation creates flexibility unmatched in the industry and accounts for the fact that the Oracle schema for Customers, Suppliers, and Accounts is a true superset of the wide variety of commercial and homegrown customer models in existence. Sites Sites are places where business is conducted. They can be addresses, clusters such as retail malls, locations within a cluster, floors within a building, places where meters are located, rooms on floors, etc. Fully understanding all attributes of a site is key to many business processes. Attributes such as 'noise abatement policy' at a point of delivery, or the size of an oven in a business kitchen drive day-to-day activities such as delivery schedules or food promotions. Typically this kind of data is siloed in departments and scattered across applications and spreadsheets. This leads to conflicting information and poor operational efficiencies. Oracle's Global Single Schema can hold all site attributes in one place and enables a single version of authoritative site information across the enterprise. Products and Services The Oracle Global Single Schema also includes a number of entities that define the products and services a company creates and offers for sale. Key entities include Items organized into Catalogs and Price Lists. The Catalog structures provide for the ability to capture different views of a product such as engineering, manufacturing, and service which are based on a unified product model. As a result, designers, manufacturing engineers, purchasers and partners can work simultaneously on a common product definition. The Catalog schema allows for unlimited attributes, combines them into meaningful groups, and maps them to catalog categories to track these different types of information. The model also maps an unlimited number of functional structures for each item. For example, multiple Bills of Material (BOMs) can be constructed representing requirements BOM, features BOM, and packaging BOM for an item. The Catalog model also supports hierarchical information about each item and all standard Global Data Synchronization attributes. Business Processes Utilizing Linked Data Entities Each business entity codified into a centralized master data environment significantly improves the efficiency of the automated business processes that use the consolidated data. When all the key business entities used by an organization's process are so consolidated, the advantages are multiplied. The primary reason for business process breakdowns (i.e. data errors across application boundaries) is eliminated. All processes are positively impacted and business process automation is itself automated. I like to use the "Call to Resolution" business process as an example to help illustrate this important point. It involves call center applications, service applications, RMA applications, transportation applications, inventory applications, etc. Customer, Site, Product and Supplier master data must all be correct and consistent across these applications. What's more, the data relationships between customer and product, and product and suppliers must be right. This is the minimum quality needed to insure the business process flows without error. But that is not the end of the story. Critical master data attributes such as customer loyalty, profitability, credit worthiness, and propensity to buy can optimize the call center point of contact component of the process. Critical product information such as alternative parts or equivalent products can optimize the resolution selected by the process. A comprehensive understanding of the 'service at' location can help insure multiple trips are avoided in the process. Full supplier information on reliability, delivery delays, and potential alternates can prevent supplier exceptions and play a significant role in optimizing the process. In other words, these master data attributes enable the optimization of the "Call to Resolution" enterprise business process. Master data supports and guides business process flows. Thus the phrase 'Master Data' is indeed appropriate. MDM is the software that houses, manages, and governs the master data that resides in all applications and controls the enterprise business processes. A complete master data solution takes a data model that holds fully attributed master data entities and their inter-relationships. Oracle has this model. Oracle, with its deep understanding of application data is the logical choice for managing all your master data within the enterprise whether or not your organization actually runs any Oracle Applications.

Read the article

Securing an ADF Application using OES11g: Part 1

- by user12587121

Future releases of the Oracle stack should allow ADF applications to be secured natively with Oracle Entitlements Server (OES). In a sequence of postings here I explore one way to achive this with the current technology, namely OES 11.1.1.5 and ADF 11.1.1.6. ADF Security Basics ADF Bascis The Application Development Framework (ADF) is Oracle’s preferred technology for developing GUI based Java applications. It can be used to develop a UI for Swing applications or, more typically in the Oracle stack, for Web and J2EE applications. ADF is based on and extends the Java Server Faces (JSF) technology. To get an idea, Oracle provides an online demo to showcase ADF components. ADF can be used to develop just the UI part of an application, where, for example, the data access layer is implemented using some custom Java beans or EJBs. However ADF also has it’s own data access layer, ADF Business Components (ADF BC) that will allow rapid integration of data from data bases and Webservice interfaces to the ADF UI component. In this way ADF helps implement the MVC approach to building applications with UI and data components. The canonical tutorial for ADF is to open JDeveloper, define a connection to a database, drag and drop a table from the database view to a UI page, build and deploy. One has an application up and running very quickly with the ability to quickly integrate changes to, for example, the DB schema. ADF allows web pages to be created graphically and components like tables, forms, text fields, graphs and so on to be easily added to a page. On top of JSF Oracle have added drag and drop tooling with JDeveloper and declarative binding of the UI to the data layer, be it database, WebService or Java beans. An important addition is the bounded task flow which is a reusable set of pages and transitions. ADF adds some steps to the page lifecycle defined in JSF and adds extra widgets including powerful visualizations. It is worth pointing out that the Oracle Web Center product (portal, content management and so on) is based on and extends ADF. ADF Security ADF comes with it’s own security mechanism that is exposed by JDeveloper at development time and in the WLS Console and Enterprise Manager (EM) at run time. The security elements that need to be addressed in an ADF application are: authentication, authorization of access to web pages, task-flows, components within the pages and data being returned from the model layer. One typically relies on WLS to handle authentication and because of this users and groups will also be handled by WLS. Typically in a Dev environment, users and groups are stored in the WLS embedded LDAP server. One has a choice when enabling ADF security (Application->Secure->Configure ADF Security) about whether to turn on ADF authorization checking or not: In the case where authorization is enabled for ADF one defines a set of roles in which we place users and then we grant access to these roles to the different ADF elements (pages or task flows or elements in a page). An important notion here is the difference between Enterprise Roles and Application Roles. The idea behind an enterprise role is that is defined in terms of users and LDAP groups from the WLS identity store. “Enterprise” in the sense that these are things available for use to all applications that use that store. The other kind of role is an Application Role and the idea is that a given application will make use of Enterprise roles and users to build up a set of roles for it’s own use. These application roles will be available only to that application. The general idea here is that the enterprise roles are relatively static (for example an Employees group in the LDAP directory) while application roles are more dynamic, possibly depending on time, location, accessed resource and so on. One of the things that OES adds that is that we can define these dynamic membership conditions in Role Mapping Policies. To make this concrete, here is how, at design time in Jdeveloper, one assigns these rights in Jdeveloper, which puts them into a file called jazn-data.xml: When the ADF app is deployed to a WLS this JAZN security data is pushed to the system-jazn-data.xml file of the WLS deployment for the policies and application roles and to the WLS backing LDAP for the users and enterprise roles. Note the difference here: after deploying the application we will see the users and enterprise roles show up in the WLS LDAP server. But the policies and application roles are defined in the system-jazn-data.xml file. Consult the embedded WLS LDAP server to manage users and enterprise roles by going to the domain console and then Security Realms->myrealm->Users and Groups: For production environments (or in future to share this data with OES) one would then perform the operation of “reassociating” this security policy and application role data to a DB schema (or an LDAP). This is done in the EM console by reassociating the Security Provider. This blog posting has more explanations and references on this reassociation process. If ADF Authentication and Authorization are enabled then the Security Policies for a deployed application can be managed in EM. Our goal is to be able to manage security policies for the applicaiton rather via OES and it's console. Security Requirements for an ADF Application With this package tour of ADF security we can see that to secure an ADF application with we would expect to be able to take care of at least the following items: Authentication, including a user and user-group store Authorization for page access Authorization for bounded Task Flow access. A bounded task flow has only one point of entry and so if we protect that entry point by calling to OES then all the pages in the flow are protected. Authorization for viewing data coming from the data access layer In the next posting we will describe a sample ADF application and required security policies. References ADF Dev Guide: Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework: Enabling ADF Security in a Fusion Web Application Oracle tutorial on securing a sample ADF application, appears to require ADF 11.1.2 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Oracle Identity Manager Role Management With API

- by mustafakaya

As an administrator, you use roles to create and manage the records of a collection of users to whom you want to permit access to common functionality, such as access rights, roles, or permissions. Roles can be independent of an organization, span multiple organizations, or contain users from a single organization. Using roles, you can: View the menu items that the users can access through Oracle Identity Manager Administration Web interface. Assign users to roles. Assign a role to a parent role Designate status to the users so that they can specify defined responses for process tasks. Modify permissions on data objects. Designate role administrators to perform actions on roles, such as enabling members of another role to assign users to the current role, revoke members from current role and so on. Designate provisioning policies for a role. These policies determine if a resource object is to be provisioned to or requested for a member of the role. Assign or remove membership rules to or from the role. These rules determine which users can be assigned/removed as direct membership to/from the role. In this post, i will share some examples for role management with Oracle Identity Management API. You can do role operations you can use Thor.API.Operations.tcGroupOperationsIntf interface. tcGroupOperationsIntf service = getClient().getService(tcGroupOperationsIntf.class); Assign an user to role : public void assignRoleByUsrKey(String roleName, String usrKey) throws Exception { Map<String, String> filter = new HashMap<String, String>(); filter.put("Groups.Role Name", roleName); tcResultSet role = service.findGroups(filter); String groupKey = role.getStringValue("Groups.Key"); service.addMemberUser(Long.parseLong(groupKey), Long.parseLong(usrKey)); } Revoke an user from role: public void revokeRoleByUsrKey(String roleName, String usrKey) throws Exception { Map<String, String> filter = new HashMap<String, String>(); filter.put("Groups.Role Name", roleName); tcResultSet role = service.findGroups(filter); String groupKey = role.getStringValue("Groups.Key"); service.removeMemberUser(Long.parseLong(groupKey), Long.parseLong(usrKey)); } Get all members of a role : public List<User> getRoleMembers(String roleName) throws Exception { List<User> userList = new ArrayList<User>(); Map<String, String> filter = new HashMap<String, String>(); filter.put("Groups.Role Name", roleName); tcResultSet role = service.findGroups(filter); String groupKey = role.getStringValue("Groups.Key"); tcResultSet members = service.getAllMemberUsers(Long.parseLong(groupKey)); for (int i = 0; i < members.getRowCount(); i++) { members.goToRow(i); long userKey = members.getLongValue("Users.Key"); User member = oimUserManager.findUserByUserKey(String.valueOf(userKey)); userList.add(member); } return userList; } About me: Mustafa Kaya is a Senior Consultant in Oracle Fusion Middleware Team, living in Istanbul. Before coming to Oracle, he worked in teams developing web applications and backend services at a telco company. He is a Java technology enthusiast, software engineer and addicted to learn new technologies,develop new ideas. Follow Mustafa on Twitter,Connect on LinkedIn, and visit his site for Oracle Fusion Middleware related tips.

Read the article

Moving from Tortoise to TFS

- by MarkPearl

The Past A few years ago my small software company made the jump from storing code on a shared folder to source code control. At the time we had evaluated a few of the options and settled on Tortoise SVN. The main motivation for going the SVN route was that we found a great plugin for Visual Studio that allowed us to avoid the command prompt for uploading changes (like I said we are windows programmers… command prompt bad!! ) and it was free. Up to now we have been pretty happy with SVN as it removed many of the worries that I had about how safe my code was on a shared folder and also gave us the opportunity to safely have several developers work on the same project at the same time. The only times when we have been unhappy has been when we have had SVN hell days – which pretty much occur when you are doing something out of the norm and suddenly SVN just won’t resolve conflicts or something along those lines. This happens once every 4 or 5 months and is not necessarily a problem caused directly by SVN – but a problem augmented by SVN. When you have SVN hell days you want to curse SVN! With that in mind I recently have been relooking at our source code control. I have explored using GIT and was very impressed by it and have also looked at TFS. From a source code control perspective I don’t want to get into a heated discussion on which one is better – but I do want to mention that I wear two hats in my organization – software developer & manager, and with the manager hat on I tend to sway the TFS route. So when I was given a coupon to test DiscountASP.Net Team Foundation Server Service for a year, I thought it was the perfect opportunity to try TFS in a distributed environment and also make the first step towards having an integrated development management system. Some of the things that appeal to me about DiscountASP’s offering are the following… Basic management / planning facilities like to do lists inside Visual Studio Daily backup of data on the server – we are developers, not IT managers and so the more of this I could outsource the better Distributed solution – all of us work remotely and so this was a big one as well. Registering and Setting Up with DiscountASP.NET The whole registration process was simple and intuitive. The web interface is not the most visually impressive one, but it is functional and a few seconds after I clicked the last submit button a email was sitting in my inbox giving me my control panel username and suggesting that I read the “Getting Started” article. The getting started article was easy to read and understand so no complaints there either. Next to set my dev environment to work. With a few references to the getting started article I had completed the whole setup process in a matter of minutes. Ten minutes after initiating the whole thing I was logged into VS2010 and creating my first TFS project. With the service that I signed up for, I have access for 5 users – which is sufficient for my internal needs. So from what I can tell, to set the rest of us up on the system I just need to supply them with their user credentials and url. My Concerns Resolved 1) Security So, a few concerns I had about the service. First and foremost – is it secure? I would hate for someone to get access to our code and the whole idea of putting it up on the internet is a concern for me. Turning to the Knowledge Base on the DiscountASP website this is one of the first question I can see answered. According to them it is secure. I have extracted their comment below regarding this. Our TFS hosting service is secure. We only accept HTTPS connections ensuring that any client-server data transmission is encrypted. At the network level, all of our systems are protected by multiple Juniper firewalls, Tipping Point's Intrusion Detection System (see Tipping Point's case study of our use here), and we also employ DDoS mitigation to add extra layers of security. Additionally, physical access to the servers is tightly restricted. Please see the security section of this Knowledge Base article for further details. 2) Web Portal Access The other big concern I have is regarding web portal access. In the ideal world I would like to be able to give my end users access to a web portal for reporting bugs etc. When I initially read through the FAQ of the site it mentioned that there was web portal access – but from what I can see this is just for “users”. Since I am limited to 5 users for the account, it would not be practical to set up external users that we could get feedback from on bugs etc. I would be interested if this is possible – and if so if someone could post it in the comments it would be much appreciated. If this isn’t possible, it is a slight let down as we rely heavily on end user feedback to get feedback and it would have been ideal to have gotten this within the service. Other than those two items, I didn’t have any real concerns that were unresolved. So where do I go from here? So time passed by from the initial writing of this post and as work whirred in and out of my inbox I have still not had a proper opportunity to give the service a test run. Recently though things have began to slow down and then surprise surprise I had another SVN Hell day. With that experience I had a new found resolve to get our team on TFS and so today we are going to start to use the service as a team. I am hoping that I do not have TFS hell days – but if I do, I will be sure to write about them. In short - the verdict is still out on whether this service is going to be invaluable to my business or whether it will create more headaches than it is worth BUT I am hopping it will be an invaluable service. I will only really be able to determine that in a few months… till then!

Read the article

Control-Break Style ADF Table - Comparing Values with Previous Row

- by Steven Davelaar

Sometimes you need to display data in an ADF Faces table in a control-break layout style, where rows should be "indented" when the break column has the same value as in the previous row. In the screen shot below, you see how the table breaks on both the RegionId column as well as the CountryId column. To implement this I didn't use fancy SQL statements. The table is based on a straightforward Locations ViewObject that is based on the Locations entity object and the Countries reference entity object, and the join query was automatically created by adding the reference EO. To get the indentation in the ADF Faces table, we simple use two rendered properties on the RegionId and CountryId outputText items: <af:column sortProperty="RegionId" sortable="false" headerText="#{bindings.LocationsView1.hints.RegionId.label}" id="c5"> <af:outputText value="#{row.RegionId}" id="ot2" rendered="#{!CompareWithPreviousRowBean['RegionId']}"> <af:convertNumber groupingUsed="false" pattern="#{bindings.LocationsView1.hints.RegionId.format}"/> </af:outputText> </af:column> <af:column sortProperty="CountryId" sortable="false" headerText="#{bindings.LocationsView1.hints.CountryId.label}" id="c1"> <af:outputText value="#{row.CountryId}" id="ot5" rendered="#{!CompareWithPreviousRowBean['CountryId']}"/> </af:column> The CompareWithPreviousRowBean managed bean is defined in request scope and is a generic bean that can be used for all the tables in your application that needs this layout style. As you can see the bean is a Map-style bean where we pass in the name of the attribute that should be compared with the previous row. The get method in the bean that is called returns boolean false when the attribute has the same value in the same row. Here is the code of the get method: public Object get(Object key) { String attrName = (String) key; boolean isSame = false; // get the currently processed row, using row expression #{row} JUCtrlHierNodeBinding row = (JUCtrlHierNodeBinding) resolveExpression(getRowExpression()); JUCtrlHierBinding tableBinding = row.getHierBinding(); int rowRangeIndex = row.getViewObject().getRangeIndexOf(row.getRow()); Object currentAttrValue = row.getRow().getAttribute(attrName); if (rowRangeIndex > 0) { Object previousAttrValue = tableBinding.getAttributeFromRow(rowRangeIndex - 1, attrName); isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue); } else if (tableBinding.getRangeStart() > 0) { // previous row is in previous range, we create separate rowset iterator, // so we can change the range start without messing up the table rendering which uses // the default rowset iterator int absoluteIndexPreviousRow = tableBinding.getRangeStart() - 1; RowSetIterator rsi = null; try { rsi = tableBinding.getViewObject().getRowSet().createRowSetIterator(null); rsi.setRangeStart(absoluteIndexPreviousRow); Row previousRow = rsi.getRowAtRangeIndex(0); Object previousAttrValue = previousRow.getAttribute(attrName); isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue); } finally { rsi.closeRowSetIterator(); } } return isSame; } The row expression defaults to #{row} but this can be changed through the rowExpression managed property of the bean. You can download the sample application here.

Read the article

CodePlex Daily Summary for Monday, July 15, 2013

CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????，???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????： Windows 8.1 Preview (x86/x64) ???????： Windows XP ????： ????????GoAgent????，????????，?????????????，???????????????????，??????????，????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????，?????、SDK、wpadk?????????????。??????????????????。??????????????????，????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

Read the article

Probation is Over: PASS Board Year 1, Q2

- by Denise McInerney

Though it's not always official every job begins with a probation period. You start out with lots of questions and every day you find out how much more you have to learn. Usually after a few months you discover that you can actually answer some questions and have at least an idea of what you are supposed to be doing. Now at the end of my second quarter on the "job" of serving on the PASS Board I have reached that point. My probation period is over. The last three months were busy for the entire Board with the budget process, an in-person meeting and moving forward with PASS Global Growth plans. I had also set a specific goal for myself for my 2nd quarter: to see the Board to adopt a Code of Conduct for the PASS Summit. Code of Conduct When I ran for the Board I included my desire to see PASS establish a code of conduct in my campaign platform. I was motivated to do this for a few reasons. Other technical conferences have had incidents of harassment. Most of these did not have a policy in place prior to having a problem, though several conference organizers have since adopted anti-harassment policies or codes of conduct. I felt it would be in PASS' interest to establish a policy so we would be prepared should there be an incident. "This is Community" Adopting a code of conduct would reinforce our community orientation and send a message about the positive character of the Summit. PASS is a leader among technical organizations for its promotion and support of women. Adopting a code of conduct would further demonstrate our leadership in this area. After researching similar polices from other organizations I published a first draft in April. I solicited feedback from the Board, HQ staff and some PASS members. Incorporating that feedback I presented version 4 at the May Board meeting, where we had a good discussion. You can read the meeting minutes for details. I incorporated points from the Board discussion as well as feedback from a legal review to produce a final version which has been submitted to the Board. It will be discussed at the Board meeting July 12. You can read the full text at the end of this post. Virtual Chapters In the first quarter we started ramping up marketing support for the Virtual Chapters. Since then each edition of the Connector has highlighted a different VC to help get out the message about the variety of eductional opporutnities that are offered. These VC profiles will continue in the coming months. I was very pleased to welcome the new DBA Fundamentals VC which is geared toward new DBAs, people who are considering entering the field and those transitioning from a different IT role. Thanks to the contributions of Erin Stellato, Michelle Nalliah and Karla Landrum we published a "Virtual Chapter Guidebook". This document includes great advice on how to build and promote a VC. It's also a reference for how things work, from budgets to webinar hosting. I think this document will be extremely valuable to all our VC leaders and am grateful to those who put it together. Board Meeting/SQL Rally The Board met in May in Dallas. Among the items discussed were Global Growth, the budget, future events and the upcoming elections. We covered a lot of ground in two days and I will again refer you to the meeting minutes for details. The meeting schedule allowed us to participate in the SQL Rally networking events and one full day of the conference. I enjoyed having the opportunity to meet and talk with many PASS members. And my hat is off to the SQL Rally organizers who put on an outstanding event. Global Growth PASS has undertaken a major intitiative to reach and engage SQL Server professionals around the world. This Global Growth plan is ambitious and will have a significant impact on the strategic direction of the organization. We have been reaching out to the community for feedback, including hosting Twitter chats and live Town Hall meetings. I co-hosted two of these events and appreciated hearing the different perspectives of the people who participated If you have not done so I encourage you to read about the Global Growth vision and proposed governance changes and submit your feedback. FY13 Budget July 1 is the beginning of PASS' fiscal year, which makes the end of June the deadline for approving a budget. Each director submits a budget for his or her portfolio. For the Virtual Chapter portfolio I focused on how we can allocate resources to grow the VCs. Budgeting is a give-and-take process, and while I didn't get everything I asked for I'm pleased the FY13 budget includes a significant increase in financial support for the Virtual Chapters. Many people put a lot of work into the budget, but no two people deserve credit more than VP of Finance Douglas McDowell and Accounting Manager Sandy Cherry. Thanks to both of them for getting us across the goal line on time. SQL Saturday I attended SQL Saturdays in Orange Co. CA and Phoenix. It's always inspiring to see the enthusiasm in the community for learning and networking. These events are successful due to the hard work of many volunteers. Thanks to the organizers in both cities for all your efforts. Next Up This quarter we'll be gearing up plans for the VCs at the Summit and exploring ways the VCs can best support PASS' Global Growth work. I'll also be wrapping up work on the Code of Conduct and attending a Board meeting in September. And I will be at SQL Saturday #144 in Sacramento later this month. Here is the language of the Code of Conduct I have submitted to the Board for consideration: PASS Code of Conduct The PASS Summit provides database professionals from a variety of backgrounds with an opportunity to connect, share and learn. We value the strong sense of community that characterizes this event and we seek to foster an inclusive, professional atmosphere. We are dedicated to providing a harassment-free conference experience for everyone, regardless of gender, race, sexual orientation, disability, physical appearance, religion or any other protected classification. Everyone at the Summit is expected to follow the Code of Conduct. This includes but is not limited to: PASS Staff, Exhibitors, Speakers, Attendees and anyone affiliated with the event. Participants are expected to follow the Code of Conduct at all Summit events, including PASS-sponsored social events. Participant behavior Harassment includes, but is not limited to, offensive verbal comments related to gender, race, sexual orientation, disability, physical appearance, religion, or any other protected classification. Intimidation, threats, stalking, harassing photography or recording, sustained disruption of talks or other events, inappropriate physical contact and unwelcome attention will also be considered harassment. Similarly, sexual, racist, derogatory, threatening or other inappropriate language and imagery are not appropriate for any conference venue, including sessions. Recourse If a participant engages in any conduct that is prohibited under this Code of Conduct, the conference organizers may take any action they deem appropriate, including warning the offender or expelling the offender from the conference. No refunds will be granted to attendees expelled from the Summit due to violations of the Code of Conduct. If you are being harassed, witness harassment, or have any other concerns, please contact a member of conference staff immediately. Conference staff can be identified by their “Headquarters/Staff” shirts and are trained to handle the situation appropriately. A Code of Conduct Committee (CCC) made up of the Executive Manager and three members of the Board of Directors designated by the President will be authorized to take action in response to an incident or behavior that violates the Code of Conduct.

Read the article

first install for windows eight.....da beta

- by raysmithequip

The W8 preview is now installed and I am enjoying it. I remember the learning curve of my first unix machine back in the eighties, this ain't that.It is normal for me to do the first os install with a keyboard and low end monitor...you never know what you'll encounter out in the field. The OS took like a fish to water. I used a low end INTEL motherboard dp55w I gathered on the cheap, an 1157 i5 from the used bin a pair of 6 gig ddr3 sticks, a rosewell 550 watt power supply a cheap used twenty buck sub 200g wd sata drive, a half working dvd burner and an asus fanless nvidia vid card, not a great one but Sub 50.00 on newey eggey...I did have to hunt the ms forums for a key and of course to activate the thing, if dos would of needed this outmoded ritual, we would still be on cpm and osborne would be a household name, of course little do people know that this ritual was common as far back as the seventies on att unix installs....not, but it was possible, I used to joke about when I ran a bbs, what hell would of been wrought had dos 3.2 machines been required to dial into my bbs to send fido mail to ms and wait for an acknowledgement. All in all the thing was pushing a seven on the ms richter scale, not including the vid card, sadly it came in at just a tad over three....I wanted to evaluate it for a possible replacement on critical machines that in the past went down due to a vid card fan failure....you have no idea what a customer thinks when you show them a failed vid card fan..."you mean that little plastic piece of junk caused all this!!??!!!"...yea man. Some production machines don't need any sort of vid, I will at least keep it on the maybe list for those, MTBF is a very important factor, some big box stores should put percentage of failure rate within 24 month estimates on the outside of the carton for sure. And a warning that the power supplies are already at their limit. Let's face it, today even 550w can be iffy.A few neat eye candy improvements over the earlier windows is nice, the metro screen is nice, anyone who has used a newer phone recently will intuitively drag their fingers across the screen....lot of good that was with no mouse or touch screen though. Lucky me, I have been using windows since day one, I still have a copy of win 2.0 (and every other version) for no good reason. Still the old ix collection of disks is much larger, recompiling any kernal is another silly ritual, same machine, different day, same recompile...argh. Rh is my all time fav, mandrake was always missing something, like it rewrote the init file or something, novell is ok as long as you stay on the beaten path and of course ubuntu normally recompiles with the same errors consistantly....makes life easy that way....no errors on windows eight, just a screen that did not match the installed hardware, natuarally I alt tabbed right out of it, then hit the flag key to find the start menu....no start button. I miss the start button already. Keyboard cowboy funnin and I was browsing the harddrive, nothing stunning there, I like that, means I can find stuff. Only I can't find what I want, the start button....the start menu is that first screen for touch tablets. No biggie for useruser, that is where they will want to be, I can see that. Admins won't want to be there, it is easy enough to get the control panel a bazzilion other ways though, just not the start button. (see a pattern here?). Personally, from the keyboard I find it fun to hit the carets along the location bar at the top of the explorer screen with tabs and arrows and choose SHOW ALL CONTROL PANEL ITEMS, or thereabouts. Bottom line, I love seven and I'll love eight even more!...very happy I did not have to follow the normal rule of thumb (a customer watching me build a system and asking questions said "oh I get it, so every piece you put in there is basically a hundred bucks, right?)...ok, sure, pretty much, more or less, well, ya dude. It will be WAY past october till I get a real touch screen but I did pick up a pair of cheap tatungs so I can try the NEW main start screen, I parse a lot of folders and have a vision of how a pair of touch screens will be easier than landing a rover on mars. Ok. fine, they are way smallish, and I don't expect multitouch to work but we are talking a few percent of a new 21 inch viewsonic touch screen. Will this OS be a game changer? I don't know. Bottom line with all the pads and droids in the world, it is more of a catch up move at first glance. Not something ms is used to. An app store? I can see ms's motivation, the others have it. I gather there will not be gadgets there, go ahead and see what ms did to the once populated gadget page...go ahead, google gadgets and take a gander, used to hundreds of gadgets, they are already gone. They replaced gadgets? sort of, I'll drop that, it's a bit of a sore point for me. More of interest was what happened when I downloaded stuff off codeplex and some other normal programs that I like, like orbitron, top o' my list!!...cardware it is...anyways, click on the exe, get a screen, normal for windows, this one indicated that I was not running a normal windows program and had a button for exit the install, naw, I hit details, a hidden run program anyways came into view....great, my path to the normal windows has detected a program tha.....yea ok, acl is on, fine, moving along I got orbitron installed in record time and was tracking the iss on the newest Microsoft OS, beta of course, felt like the first time I setup bsd all those year ago...FUN!!...I suppose I gotta start to think about budgeting for the real os when it comes out in october, by then I should have a rasberry pi and be done with fedora remixed. Of course that sounds like fun too!! I would use this OS on a tablet or phone. I don't like the idea of being hearded to an app store, don't like that on anything, we are americans and want real choices not marketed hype, lest you are younger with opm (other peoples money). This os would be neat on a zune, but I suspect the zune is a gonner, I am rooting for microsoft, after all their default password is not admin anymore, nor alpine, it's blank. Others force a password, my first fawn password was so long I could not even log into it with the password in front of me, who the heck uses %$# anyways, and if I was writing a brute force attack what the heck kinda impasse is that anyways at .00001 microseconds of a code execution cycle (just a non qualified number, not a real clock speed)....AI is where it will be before too long, MS is on that path, perhaps soon someone will sit down and write an app for the kinect that watches your eyes while you scan the new main start screen, clicking on the big E icon when you blink.....boy is that going to be fun!!!! sure. Blink,dammit,blink,dammit...... OPM no doubt.I like windows eight, we are moving forwards, better keep a close eye on ubuntu. The real clinch comes when open source becomes paid source......don't blink, I already see plenty of very expensive 'ix apps, some even in app stores already. more to come.......

Read the article

Integration Patterns with Azure Service Bus Relay, Part 3: Anonymous partial-trust consumer

- by Elton Stoneman

This is the third in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer As the patterns get further from the simple .NET full-trust consumer, all that changes is the communication protocol and the authentication mechanism. In Part 3 the scenario is that we still have a secure .NET environment consuming our service, so we can store shared keys securely, but the runtime environment is locked down so we can't use Microsoft.ServiceBus to get the nice WCF relay bindings. To support this we will expose a RESTful endpoint through the Azure Service Bus, and require the consumer to send a security token with each HTTP service request. Pattern applicability This is a good fit for scenarios where: the runtime environment is secure enough to keep shared secrets the consumer can execute custom code, including building HTTP requests with custom headers the consumer cannot use the Azure SDK assemblies the service may need to know who is consuming it the service does not need to know who the end-user is Note there isn't actually a .NET requirement here. By exposing the service in a REST endpoint, anything that can talk HTTP can be a consumer. We'll authenticate through ACS which also gives us REST endpoints, so the service is still accessed securely. Our real-world example would be a hosted cloud app, where we we have enough room in the app's customisation to keep the shared secret somewhere safe and to hook in some HTTP calls. We will be flowing an identity through to the on-premise service now, but it will be the service identity given to the consuming app - the end user's identity isn't flown through yet. In this post, we’ll consume the service from Part 1 in ASP.NET using the WebHttpRelayBinding. The code for Part 3 (+ Part 1) is on GitHub here: IPASBR Part 3. Authenticating and authorizing with ACS We'll follow the previous examples and add a new service identity for the namespace in ACS, so we can separate permissions for different consumers (see walkthrough in Part 1). I've named the identity partialTrustConsumer. We’ll be authenticating against ACS with an explicit HTTP call, so we need a password credential rather than a symmetric key – for a nice secure option, generate a symmetric key, copy to the clipboard, then change type to password and paste in the key: We then need to do the same as in Part 2 , add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: partialTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send As with Part 2, this sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. RESTfully exposing the on-premise service through Azure Service Bus Relay The part 3 sample code is ready to go, just put your Azure details into Solution Items\AzureConnectionDetails.xml and “Run Custom Tool” on the .tt files. But to do it yourself is very simple. We already have a WebGet attribute in the service for locally making REST calls, so we are just going to add a new endpoint which uses the WebHttpRelayBinding to relay that service through Azure. It's as easy as adding this endpoint to Web.config for the service: <endpoint address="https://sixeyed-ipasbr.servicebus.windows.net/rest" binding="webHttpRelayBinding" contract="Sixeyed.Ipasbr.Services.IFormatService" behaviorConfiguration="SharedSecret"> </endpoint> - and adding the webHttp attribute in your endpoint behavior: <behavior name="SharedSecret"> <webHttp/> <transportClientEndpointBehavior credentialType="SharedSecret"> <clientCredentials> <sharedSecret issuerName="serviceProvider" issuerSecret="gl0xaVmlebKKJUAnpripKhr8YnLf9Neaf6LR53N8uGs="/> </clientCredentials> </transportClientEndpointBehavior> </behavior> Where's my WSDL? The metadata story for REST is a bit less automated. In our local webHttp endpoint we've enabled WCF's built-in help, so if you navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/help - you'll see the uri format for making a GET request to the service. The format is the same over Azure, so this is where you'll be connecting: https://[your-namespace].servicebus.windows.net/rest/reverse?string=abc123 Build the service with the new endpoint, open that in a browser and you'll get an XML version of an HTTP status code - a 401 with an error message stating that you haven’t provided an authorization header: <?xml version="1.0"?><Error><Code>401</Code><Detail>MissingToken: The request contains no authorization header..TrackingId:4cb53408-646b-4163-87b9-bc2b20cdfb75_5,TimeStamp:10/3/2012 8:34:07 PM</Detail></Error> By default, the setup of your Service Bus endpoint as a relying party in ACS expects a Simple Web Token to be presented with each service request, and in the browser we're not passing one, so we can't access the service. Note that this request doesn't get anywhere near your on-premise service, Service Bus only relays requests once they've got the necessary approval from ACS. Why didn't the consumer need to get ACS authorization in Part 2? It did, but it was all done behind the scenes in the NetTcpRelayBinding. By specifying our Shared Secret credentials in the consumer, the service call is preceded by a check on ACS to see that the identity provided is a) valid, and b) allowed access to our Service Bus endpoint. By making manual HTTP requests, we need to take care of that ACS check ourselves now. We do that with a simple WebClient call to the ACS endpoint of our service; passing the shared secret credentials, we will get back an SWT: var values = new System.Collections.Specialized.NameValueCollection(); values.Add("wrap_name", "partialTrustConsumer"); //service identity name values.Add("wrap_password", "suCei7AzdXY9toVH+S47C4TVyXO/UUFzu0zZiSCp64Y="); //service identity password values.Add("wrap_scope", "http://sixeyed-ipasbr.servicebus.windows.net/"); //this is the realm of the RP in ACS var acsClient = new WebClient(); var responseBytes = acsClient.UploadValues("https://sixeyed-ipasbr-sb.accesscontrol.windows.net/WRAPv0.9/", "POST", values); rawToken = System.Text.Encoding.UTF8.GetString(responseBytes); With a little manipulation, we then attach the SWT to subsequent REST calls in the authorization header; the token contains the Send claim returned from ACS, so we will be authorized to send messages into Service Bus. Running the sample Navigate to http://localhost:2028/Sixeyed.Ipasbr.WebHttpClient/Default.cshtml, enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

Read the article

MapReduce in DryadLINQ and PLINQ

- by JoshReuben

MapReduce See http://en.wikipedia.org/wiki/Mapreduce The MapReduce pattern aims to handle large-scale computations across a cluster of servers, often involving massive amounts of data. "The computation takes a set of input key/value pairs, and produces a set of output key/value pairs. The developer expresses the computation as two Func delegates: Map and Reduce. Map - takes a single input pair and produces a set of intermediate key/value pairs. The MapReduce function groups results by key and passes them to the Reduce function. Reduce - accepts an intermediate key I and a set of values for that key. It merges together these values to form a possibly smaller set of values. Typically just zero or one output value is produced per Reduce invocation. The intermediate values are supplied to the user's Reduce function via an iterator." the canonical MapReduce example: counting word frequency in a text file. MapReduce using DryadLINQ see http://research.microsoft.com/en-us/projects/dryadlinq/ and http://connect.microsoft.com/Dryad DryadLINQ provides a simple and straightforward way to implement MapReduce operations. This The implementation has two primary components: A Pair structure, which serves as a data container. A MapReduce method, which counts word frequency and returns the top five words. The Pair Structure - Pair has two properties: Word is a string that holds a word or key. Count is an int that holds the word count. The structure also overrides ToString to simplify printing the results. The following example shows the Pair implementation. public struct Pair { private string word; private int count; public Pair(string w, int c) { word = w; count = c; } public int Count { get { return count; } } public string Word { get { return word; } } public override string ToString() { return word + ":" + count.ToString(); } } The MapReduce function that gets the results. the input data could be partitioned and distributed across the cluster. 1. Creates a DryadTable<LineRecord> object, inputTable, to represent the lines of input text. For partitioned data, use GetPartitionedTable<T> instead of GetTable<T> and pass the method a metadata file. 2. Applies the SelectMany operator to inputTable to transform the collection of lines into collection of words. The String.Split method converts the line into a collection of words. SelectMany concatenates the collections created by Split into a single IQueryable<string> collection named words, which represents all the words in the file. 3. Performs the Map part of the operation by applying GroupBy to the words object. The GroupBy operation groups elements with the same key, which is defined by the selector delegate. This creates a higher order collection, whose elements are groups. In this case, the delegate is an identity function, so the key is the word itself and the operation creates a groups collection that consists of groups of identical words. 4. Performs the Reduce part of the operation by applying Select to groups. This operation reduces the groups of words from Step 3 to an IQueryable<Pair> collection named counts that represents the unique words in the file and how many instances there are of each word. Each key value in groups represents a unique word, so Select creates one Pair object for each unique word. IGrouping.Count returns the number of items in the group, so each Pair object's Count member is set to the number of instances of the word. 5. Applies OrderByDescending to counts. This operation sorts the input collection in descending order of frequency and creates an ordered collection named ordered. 6. Applies Take to ordered to create an IQueryable<Pair> collection named top, which contains the 100 most common words in the input file, and their frequency. Test then uses the Pair object's ToString implementation to print the top one hundred words, and their frequency. public static IQueryable<Pair> MapReduce( string directory, string fileName, int k) { DryadDataContext ddc = new DryadDataContext("file://" + directory); DryadTable<LineRecord> inputTable = ddc.GetTable<LineRecord>(fileName); IQueryable<string> words = inputTable.SelectMany(x => x.line.Split(' ')); IQueryable<IGrouping<string, string>> groups = words.GroupBy(x => x); IQueryable<Pair> counts = groups.Select(x => new Pair(x.Key, x.Count())); IQueryable<Pair> ordered = counts.OrderByDescending(x => x.Count); IQueryable<Pair> top = ordered.Take(k); return top; } To Test: IQueryable<Pair> results = MapReduce(@"c:\DryadData\input", "TestFile.txt", 100); foreach (Pair words in results) Debug.Print(words.ToString()); Note: DryadLINQ applications can use a more compact way to represent the query: return inputTable .SelectMany(x => x.line.Split(' ')) .GroupBy(x => x) .Select(x => new Pair(x.Key, x.Count())) .OrderByDescending(x => x.Count) .Take(k); MapReduce using PLINQ The pattern is relevant even for a single multi-core machine, however. We can write our own PLINQ MapReduce in a few lines. the Map function takes a single input value and returns a set of mapped values àLINQ's SelectMany operator. These are then grouped according to an intermediate key à LINQ GroupBy operator. The Reduce function takes each intermediate key and a set of values for that key, and produces any number of outputs per key à LINQ SelectMany again. We can put all of this together to implement MapReduce in PLINQ that returns a ParallelQuery<T> public static ParallelQuery<TResult> MapReduce<TSource, TMapped, TKey, TResult>( this ParallelQuery<TSource> source, Func<TSource, IEnumerable<TMapped>> map, Func<TMapped, TKey> keySelector, Func<IGrouping<TKey, TMapped>, IEnumerable<TResult>> reduce) { return source .SelectMany(map) .GroupBy(keySelector) .SelectMany(reduce); } the map function takes in an input document and outputs all of the words in that document. The grouping phase groups all of the identical words together, such that the reduce phase can then count the words in each group and output a word/count pair for each grouping: var files = Directory.EnumerateFiles(dirPath, "*.txt").AsParallel(); var counts = files.MapReduce( path => File.ReadLines(path).SelectMany(line => line.Split(delimiters)), word => word, group => new[] { new KeyValuePair<string, int>(group.Key, group.Count()) });

Read the article

Google Analytics on Android

- by pjv

There is a specific and official analytics SDK for native Android apps (note that I'm not talking about webpages in apps on a phone). This library basically sends pages and events to Google Analytics and you can view your analytics in exactly the same dashboard as for websites. Since my background is apps rather than websites, and since a lot of the Google Analytics terminology seems particularly inapplicable to a native app, I need some pointers. Please discuss my remarks, provide some clarification where you think I'm off-track, and above all share good experiences! 1. Page Views Pages mostly can match different Activities (and Dialogs) being displayed. Activities can be visible behind non-full-screen Activities however, though only the top-level Activity can be interacted. This sort-off clashes with a "(page) view". You'd also want at least one page view for each visit and therefore put one page view tracker in the Application class. However this does not constitute a window or sorts. Usually an Activity will open at the same time, so the time spent on that page will have been 0. This will influence your "time spent" statistics. How are these counted anyway? Moreover, there is a loose coupling between the Activities, by means of Intents. A user can, much like on any website, step in at any Activity, although usually this then concerns resuming the application where he left off. This makes that the hierarchy of Activities usually is very flat. And since there are no url's involved. What meaning would using slashes in page titles have, such as "/Home"? All pages would appear on an equal level in the reports, so no content drilldown. Non-unique page views seem to be counted as some kind of indicator of successfulness: how often does the visitor revisit the page. When the user rotates the screen however usually an Activity resumes again, thus making it a new page view. This happens a lot. Maybe a well-thought-through placement of the call might solve this, or placing several, I'm not sure. How to deal with Page Views? 2. Events I'd say there are two sorts: A user event Something that happened, usually as an indirect consequence of the above. The latter particularly is giving me headaches. First of all, many events aren't written in code any more, but pieced logically together by means of Intents. This means that there is no place to put the analytics call. You'd either have to give up this advantage and start doing it the old-fashioned way in favor of good analytics, or, just be missing some events. Secondly, as a developer you're not so much interested in when a user clicks a button, but if the action that should have been performed really was performed and what the result was. There seems to be no clear way to get resulting data into Google Analytics (what's up with the integers? I want to put in Strings!). The same that applies to the flat pages hierarchy, also goes for the event categories. You could do "vertical" categories (topically, that is), but some code is shared "horizontally" and the tracking will be equally shared. Just as with the Intents mechanism, inheritance makes it hard for you to put the tracking in the right places at all times. And I can't really imagine "horizontal" categories. Unless you start making really small categories, such as all the items form the same menu in one category, I have a hard time grasping the concept. Finally, how do you deal with cancelling? Usually you both have an explicit cancel mechanism by ways of a button, as well as the implicit cancel when the "back"-button is pressed to leave the activity and there were no changes. The latter also applies to "saves", when the back button is pressed and there ARE changes. How are you consequently going to catch all these if not by doing all the "back"-button work yourself? How to deal with events? 3. Goals For goal types I have choice of: URL Destination, Time on Site, and Pages/Visit. Most apps don't have a funnel that leads the user to some "registration done" or "order placed" page. Apps have either already been bought (in which case you want to stimulate the user to love your app, so that he might bring on new buyers) or are paid for by in-app ads. So URL Destination is not a very important goal. Time on Site also seems troublesome. First, I have some doubt on how this would be measured. Second, I don't necessarily want my user to spend a lot of time in my already paid app, just be active and content. Equivalently, why not mention how frequent a user uses your app? Regarding Pages/Visit I already mentioned how screen orientation changes blow up the page view numbers. In an app I'd be most interested in events/visit to measure the user's involvement/activity. If he's intensively using the app then he must be loving it right? Furthermore, I also have some small funnels (that do not lead to conversion though) that I want to see streamlined. In my mind those funnels would end in events rather than page views but that seems not to be possible. I could also measure clickthroughs on in-app ads, but then I'd need to track those as Page Views rather than Events, in view of "URL Destination". What are smart goals for apps and how can you fit them on top of Analytics? 4. Optimisation Is there a smart way to manually do what "Website Optimiser" does for websites? Most importantly, how would I track different landing page designs? 5. Traffic Sources Referrals deal with installation time referrals, if you're smart enough to get them included. But perhaps I'd also want to get some data which third-party app sends users to my app to perform some actions (this app interoperability is possible via Intents). Many of the terminologies related to "Traffic Sources" seem totally meaningless and there is no possibility of connecting in AdSense. What are smart uses of this data? 6. Visitors Of the "Browser capabilities", "Network Properties" and "Mobile" tabs, many things are pointless as they have no influence on / relation with my mostly offline app that won't use flash anyway. Only if you drill down far enough, can you get to OS versions, which do matter a lot. I even forgot where you could check what exact Android devices visited. What are smart uses of this data? How can you make the relevant info more prominent? 7. Other No in-page analytics. I have to register my app as a web-url (What!?)?

Read the article

Webcast Q&A: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter

- by kellsey.ruppel

Last Thursday we had the second webcast in our WebCenter in Action webcast series, "Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter, where customer Michael Chander from Qualcomm and Vince Casarez & Gourav Goyal from Oracle Partner Keste shared how Oracle WebCenter is powering Qualcomm’s externally facing website and providing a seamless experience for their customers. In case you missed it, here's a recap of the Q&A. Mike Chandler, Qualcomm Q: Did you run into any issues when integrating all of the different applications together?A: Definitely, our main challenges were in the area of user provisioning and security propagation, all the standard stuff you might expect when hooking up SSO for authentication and authorization. In addition, we spent several iterations getting the UI’s in sync. While everyone was given the same digital material to build too, each team interpreted and implemented it their own way. Initially as a user navigated, if you were looking for it, you could slight variations in color or font or width , stuff like that. So we had to pull all the developers responsible for the UI together and get pixel level agreement on a lot of things so we could ensure seamless transitions across applications. Q: What has been the biggest benefit your end users have seen?A: Wow, there have been several. An SSO enabled environment was huge a win for our users. The portal application that this replaced had not really been invested in by the business. With this project, we had full business participation and backing, and it really showed in some key areas like the shopping experience. For example, while ordering in the previous site, the items did not have any pictures or really usable descriptions. A tremendous amount of work was done to try and make the site more intuitive and user friendly. Site performance has also drastically improved thanks to new hardware, improved database design, and of course the fact that ADF has made great strides in runtime performance. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: Within a large company, I’m sure there is always going to be competition for large projects, as there was here. Once we got through the technical analysis and settled on the technology choices, it was actually no resistance to implementing the solution. This project was fully driven by the business with the aim of long term growth. I can confidently say that the fact that this project was given the utmost importance by both the business and IT really help put down any resistance that you would typically see while implementing a new solution. Q: Given the performance, what do you estimate to be the top end capacity of the system? A:I think our top end capacity is really only limited by our hardware. I’m comfortable saying we could grow 10x on our current hardware, both in terms of transactions and users. We can easily spin up new JVM instances if needed. We already use less JVM’s than we had planned. In addition, ADF is doing a very good job with his connection pooling and application module pooling, so we see a very good ratio of users connected to the systems vs db connections, without impacting performace. Q: What's the overview or summary of feedback from the users interacting with the site?A: Feedback has been overwhelmingly positive from both the business and our customers. They’re very happy with the new SSO environment , the new LAF, and the performance of the site. Of course, it’s not all roses. No matter what, there are always going to be people that don’t like the layout or the color scheme, etc. By and large though, customers are happy and the business is happy. Q: Can you describe the impressions about the site before and after the project within Qualcomm?A: Before the project, the site worked and people were using it, but most people were not happy with it. It was slow and tended to be a bit tempermental, for example a user would perform a transaction and the system would throw and unexpected error. The user could back up and retry the steps and things would work fine, so why didn’t work the first time?. From a UI perspective, we’d hear comments like it looked like it was built by a high school student. Vince Casarez & Gourav Goyal, Keste Q: Did you run into any obstacles when implementing the solution?A: It's interesting some people call them "obstacles" on this project we just called them "dependencies". There were both technical and business related dependencies that we had to work out. Mike points out the SSO dependencies and the coordination and synchronization between the teams to have a seamless login experience and a seamless end user experience. There was also a set of dependencies on the User Acceptance testing to make sure that everyone understood the use cases for how the system would be used. With a branching into a new market and trying to match a simple user experience as many consumer sites have today, there was always a tendency for the team members to provide their suggestions on how things could be simpler. But with all the work up front on the user design and getting the business driving this set of experiences, this minimized the downstream suggestions that tend to distract a team. In this case, all the work up front allowed us to enumerate the "dependencies" and keep the distractions to a minimum. Q: Was there a lot of custom work that needed to be done for this particular solution?A: The focus for this particular solution was really on the custom processes. The interesting thing is that with the data flows and the integration with applications, there are some pre-built integrations, but realistically for the process flow, we had to build those. The framework and tooling we used made things easier so we didn’t have to implement core functionality, like transitioning from screen to screen or from flow to flow. The design feature of Task Flows really helped speed the development and keep the component infrastructure in line with the dynamic processes. Task flows and other elements like Skins are core to the infrastructure or technology stack of Oracle. This then allowed the team to center the project focus around the business flows and use cases to meet the core requirements and keep the project on time. Q: What do you think were the keys to success for rolling out WebCenter?A: The 5 main keys to success were: 1) Sponsorship from the whole organization around this project from senior executive agreement, business owners driving functionality, and IT development alignment; 2) Upfront design planning and use case definition to clearly define the project scope and requirements; 3) Focussed development and project management aligned with the top level goals and drivers; 4) User acceptance and usability testing along the way to identify potential issues and direct resolution of the issues; and 5) Constant prioritization of the issues for development to fix by the business. It also helps to have great team chemistry and really smart people working on the project. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action! Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter from Oracle WebCenter

Read the article

CodePlex Daily Summary for Monday, August 18, 2014

CodePlex Daily Summary for Monday, August 18, 2014Popular ReleasesMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...WallSwitch: WallSwitch 1.2.5: Version 1.2.5 Changes: Added support for sequential order in collage mode. Added option to display multiple images per switch in collage mode. Fixed bug where border width wasn't being loaded properly, and was reverting to default values. Fixed bug where sequential order was repeating images on multiple monitors. Decreased likelihood of random images being repeated.OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...New Projectsballmon: ballmonExchange Database Recovery With and Without Log Files is Possible: This segments giving an overview of Exchange Server transaction log files. It describes process how users can recover their database with & without log filesFabs.Net: Ego tatmini ve gelisme amaçli yaptigim bir projedir.JacoChat: JacoChat is a simple chatting interface that uses my personal webserver as a "wall" for people to chat on.ManagedWin32: ManagedWin32 is a library that exposes the Win32 API to .NET applications.Open XML Extensions: The project provides additions to the Open XML SDK and related projects (e.g., PowerTools for Open XML), starting with MemoryStreams for Open XML Documents.orntic: Project for insurace companyTBOX: The Treasure Box Library: TBOX is a mutli-platform c library for unix, windows, mac, ios, android, etc. It includes asio, stream, container, algorithm, xml and other library modules.WeatherTS: Typescript weather application.?????@/????: ??????????????:????,????,????,???????,????????,??????:????????,?????! ?????????: ????????????????????,????????:??、??、???,?????????????????????! ????-??: ??????????????，????，???????????????。

Read the article

Loaded OBJ Model Will Not Display in OpenGL / C++ Project

- by Drake Summers

I have been experimenting with new effects in game development. The programs I have written have been using generic shapes for the visuals. I wanted to test the effects on something a bit more complex, and wrote a resource loader for Wavefront OBJ files. I started with a simple cube in blender, exported it to an OBJ file with just vertices and triangulated faces, and used it to test the resource loader. I could not get the mesh to show up in my application. The loader never gave me any errors, so I wrote a snippet to loop through my vertex and index arrays that were returned from the loader. The data is exactly the way it is supposed to be. So I simplified the OBJ file by editing it directly to just show a front facing square. Still, nothing is displayed in the application. And don't worry, I did check to make sure that I decreased the value of each index by one while importing the OBJ. - BEGIN EDIT I also tested using glDrawArrays(GL_TRIANGLES, 0, 3 ); to draw the first triangle and it worked! So the issue could be in the binding of the VBO/IBO items. END EDIT - INDEX/VERTEX ARRAY OUTPUT: GLOBALS AND INITIALIZATION FUNCTION: GLuint program; GLint attrib_coord3d; std::vector<GLfloat> vertices; std::vector<GLushort> indices; GLuint vertexbuffer, indexbuffer; GLint uniform_mvp; int initialize() { if (loadModel("test.obj", vertices, indices)) { GLfloat myverts[vertices.size()]; copy(vertices.begin(), vertices.end(), myverts); GLushort myinds[indices.size()]; copy(indices.begin(), indices.end(), myinds); glGenBuffers(1, &vertexbuffer); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBufferData(GL_ARRAY_BUFFER, sizeof(myverts), myverts, GL_STATIC_DRAW); glGenBuffers(1, &indexbuffer); glBindBuffer(GL_ARRAY_BUFFER, indexbuffer); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(myinds), myinds, GL_STATIC_DRAW); // OUTPUT DATA FROM NEW ARRAYS TO CONSOLE // ERROR HANDLING OMITTED FOR BREVITY } GLint link_result = GL_FALSE; GLuint vert_shader, frag_shader; if ((vert_shader = create_shader("tri.v.glsl", GL_VERTEX_SHADER)) == 0) return 0; if ((frag_shader = create_shader("tri.f.glsl", GL_FRAGMENT_SHADER)) == 0) return 0; program = glCreateProgram(); glAttachShader(program, vert_shader); glAttachShader(program, frag_shader); glLinkProgram(program); glGetProgramiv(program, GL_LINK_STATUS, &link_result); // ERROR HANDLING OMITTED FOR BREVITY const char* attrib_name; attrib_name = "coord3d"; attrib_coord3d = glGetAttribLocation(program, attrib_name); // ERROR HANDLING OMITTED FOR BREVITY const char* uniform_name; uniform_name = "mvp"; uniform_mvp = glGetUniformLocation(program, uniform_name); // ERROR HANDLING OMITTED FOR BREVITY return 1; } RENDERING FUNCTION: glm::mat4 model = glm::translate(glm::mat4(1.0f), glm::vec3(0.0, 0.0, -4.0)); glm::mat4 view = glm::lookAt(glm::vec3(0.0, 0.0, 4.0), glm::vec3(0.0, 0.0, 3.0), glm::vec3(0.0, 1.0, 0.0)); glm::mat4 projection = glm::perspective(45.0f, 1.0f*(screen_width/screen_height), 0.1f, 10.0f); glm::mat4 mvp = projection * view * model; int size; glUseProgram(program); glUniformMatrix4fv(uniform_mvp, 1, GL_FALSE, glm::value_ptr(mvp)); glClearColor(0.5, 0.5, 0.5, 1.0); glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT); glEnableVertexAttribArray(attrib_coord3d); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glVertexAttribPointer(attrib_coord3d, 3, GL_FLOAT, GL_FALSE, 0, 0); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, indexbuffer); glGetBufferParameteriv(GL_ELEMENT_ARRAY_BUFFER, GL_BUFFER_SIZE, &size); glDrawElements(GL_TRIANGLES, size/sizeof(GLushort), GL_UNSIGNED_SHORT, 0); glDisableVertexAttribArray(attrib_coord3d); VERTEX SHADER: attribute vec3 coord3d; uniform mat4 mvp; void main(void) { gl_Position = mvp * vec4(coord3d, 1.0); } FRAGMENT SHADER: void main(void) { gl_FragColor[0] = 0.0; gl_FragColor[1] = 0.0; gl_FragColor[2] = 1.0; gl_FragColor[3] = 1.0; } OBJ RESOURCE LOADER: bool loadModel(const char * path, std::vector<GLfloat> &out_vertices, std::vector<GLushort> &out_indices) { std::vector<GLfloat> temp_vertices; std::vector<GLushort> vertexIndices; FILE * file = fopen(path, "r"); // ERROR HANDLING OMITTED FOR BREVITY while(1) { char lineHeader[128]; int res = fscanf(file, "%s", lineHeader); if (res == EOF) { break; } if (strcmp(lineHeader, "v") == 0) { float _x, _y, _z; fscanf(file, "%f %f %f\n", &_x, &_y, &_z ); out_vertices.push_back(_x); out_vertices.push_back(_y); out_vertices.push_back(_z); } else if (strcmp(lineHeader, "f") == 0) { unsigned int vertexIndex[3]; int matches = fscanf(file, "%d %d %d\n", &vertexIndex[0], &vertexIndex[1], &vertexIndex[2]); out_indices.push_back(vertexIndex[0] - 1); out_indices.push_back(vertexIndex[1] - 1); out_indices.push_back(vertexIndex[2] - 1); } else { ... } } // ERROR HANDLING OMITTED FOR BREVITY return true; } I can edit the question to provide any further info you may need. I attempted to provide everything of relevance and omit what may have been unnecessary. I'm hoping this isn't some really poor mistake, because I have been at this for a few days now. If anyone has any suggestions or advice on the matter, I look forward to hearing it. As a final note: I added some arrays into the code with manually entered data, and was able to display meshes by using those arrays instead of the generated ones. I do not understand!

Read the article

Calculated Fields - Idiosyncracies

- by PointsToShare

© 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula: IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula: IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula: IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own! That’s all folks?! (and this time I mean it)

Read the article

Getting Started With Tailoring Business Processes

- by Richard Bingham

In this article, and for the sake of simplicity, we will use the term “On-Premise” to mean a deployment where you have design-time development access to the instance, including administration of the technology components, the applications filesystem, and the database. In reality this might be a local development instance that is then supported by a team who can deploy your customizations to the restricted production instance equivalents. Tools Overview Firstly let’s look at the Design-Time tools within JDeveloper for customizing and extending the artifacts of a Business Process. In essence this falls into two buckets; SOA Composite Editor for working with BPEL processes, and the BPM Studio. The SOA Composite Editor As a standard extension to JDeveloper, this graphical design tool should be familiar to anyone previously worked with Oracle SOA Server. With easy-to-use modeling capability, backed-up by full XML source-view (for read-only), it provides everything that is needed to implement the technical design. In simple terms, once deployed to the remote SOA Server the composite components (like Mediator) leverage the Event Delivery Network (EDN) for interaction with the application logic. If you are customizing an existing Fusion Applications BPEL process then be aware that it does support MDS-based customization layers just like Page Composer where different customizations are used based on the run-time context, like for a specific Product or Business Unit. This also makes them safe from patching and upgrades, although only a single active version of the composite is available at run-time. This is defined by a field on the composite record, available in Enterprise Manager. Obviously if you wish to fire different activities and tasks based on the user context then you can should include switches to fork the flows in your custom BPEL process. Figure 1 – A BPEL process in Composite Editor The following describes the simplified steps for making customizations to BPEL processes. This is the most common method of changing the business processes of Fusion Applications, as over 400 BPEL-based composite applications are provided out-of-the-box. Setup your local Fusion Applications JDeveloper environment. The SOA Composite Editor should be installed as part of the Fusion Applications extension. If there are problems you can also find it under the ‘Check for Updates’ help menu option. Since SOA Server is not part of the JDeveloper integrated WebLogic Server, setup a standalone WebLogic environment for deploying and testing. Obviously you might use a Fusion Applications development instance also. Package the existing standard Fusion Applications SOA Composite using Enterprise Manager and export it as a complete SOA Archive (SAR) file, resulting in a local .jar file. You may need to ask your system administrator for this. Import the exported SAR .jar file into JDeveloper using the File menu, under the option ‘SOA Archive into SOA Project’. In JDeveloper set the appropriate customization layer values, and then change from the default role to the Fusion Applications Customization Developer role. Make the customizations and save the application project. Finally redeploy the composite application, either to a direct Application Server connection, or as a fresh SAR (jar) file that can then be re-imported and deployed via Enterprise Manager. The Business Process Management (BPM) Suite In addition to the relatively low-level development environment associated with BPEL process creation, Oracle provides a suite of products that allow business process adjustments to be made without the need for some of the programming skills. The aim is to abstract much of the technical implementation and to provide a Business Analyst tools for immediately implementing organization changes. Obviously there are some limitations on what they can do, however the BPM Suite functionality increases with each release and for the majority of the cases the tools remains as applicable as its developer-orientated sister. At the current time business processes must be explicitly coded to support just one of these use-cases, either BPEL for developer use or BPM for business analyst use. That said, they both run on the same SOA Server in much the same way. The components bundled in each SOA Composite Application can be verified by inspection through Enterprise Manager. Figure 2 – A BPM Process in JDeveloper BPM Suite. BPM processes are written in a standard notation (BPMN) and the modeling tools are very similar to that of BPEL. The steps to deploy a custom BPM process are also essentially much the same, since the BPM process is bundled into a SOA Composite just like a BPEL process. As such the SOA Composite Editor actually has support for both artifacts and even allows use of them together, such as a calling a BPM process as a partnerlink from a BPEL process. For more details see the references below. Business Analyst Tooling In addition to using JDeveloper extensions for BPM development, there are run-time tools that Business Analysts can use to make adjustments, so that without high costs of an IT project the system can be tuned to match changes to the business operation. The first tool to consider is the BPM Composer, deployed with the middleware SOA Server and accessible online, and for Fusion Applications it is under the Business Process icon on the homepage of the Application Composer. Figure 3 – Business Process Composer showing a CRM process flow. The key difference between this and using JDeveloper is that the BPM Composer has a Business Catalog prepopulated with features and functions that can be used, mostly through registered WebServices. This means no coding or complex interface development is required, simply drag-drop-configure. The items in the business catalog are seeded by either Oracle (as a BPM Template) or added to by your own custom development. You cannot create or generate catalog content from BPM Composer directly. As per the screenshot you can see the Business Catalog content in the BPM Project browser region. In addition, other online tools for use by Business Analysts include the BPM Worklist application for editing business rules and approval management configuration, plus the SOA Composer which focuses on non-approval business rules and domain value maps. At the current time there are only a handful of BPM processes shipped with Fusion Applications HCM and CRM, including on-boarding workers and processing customer registrations. This also means a limited number of associated BPM Templates provided out-of-the-box, therefore a limited Business Catalog. That said, BPM-based extension is a powerful capability to leverage and will most likely develop going forwards, especially for use in SaaS deployments where full design-time JDeveloper access is not available. Further Reading For BPEL – Fusion Applications Extensibility Guide – Section 12 For BPM – Fusion Applications Extensibility Guide – Section 7 The product-specific documentation and implementation guides for Fusion Applications Fusion Middleware Developers Guide for SOA Suite Modeling and Implementation Guide for Oracle Business Process Management User’s Guide for Oracle Business Process Composer Oracle University courses on BPM Suite and SOA Development

Search Results

Search found 9796 results on 392 pages for 'arrange items'.

Page 369/392 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376 | Next Page >

- by Simon Cooper

- by Brian T. Jackett

- by Pinal Dave

- by costlow

- by Jeff

- by Most Valuable Yak (Rob Volk)

- by gerrylowry

- by david.butler(at)oracle.com

- by user12587121

- by mustafakaya

- by MarkPearl

- by Steven Davelaar

- by Denise McInerney

- by raysmithequip

- by Elton Stoneman

- by JoshReuben

- by pjv

- by kellsey.ruppel

- by Drake Summers

- by PointsToShare

- by Richard Bingham

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376 | Next Page >