discrete space - Page 369

Cache Simulator in C

- by DuffDuff

Ok this is only my second question, and it's quite a doozy. It's for a school assignment, but no one (including the TAs) seems to be able to help me. It's kind of a tall order but I'm not sure where else to turn. Essentially the assignment was to make a cache simulator. This version is direct mapping and is actually only a small portion of the whole project, but if I can't even get this down I have no chance with other associativities. I'm posting my whole code because I don't want to make any assumptions about where the problem is. This is the test case: http://www.mediafire.com/?ty5dnihydnw And you run the following command: ./sims 512 direct 32 fifo wt pinatrace.out You're supposed to get: hits: 604037 misses 138349 writes: 239269 reads: 138349 But I get: Hits: 587148 Misses: 155222 Writes: 239261 Reads: 155222 If anyone could at least point me in the right direction it would be greatly appreciated. I've been stuck on this for about 12 hours. #include <stdio.h> #include <stdlib.h> #include <string.h> #include <math.h> struct myCache { int valid; char *tag; char *block; }; /* sim [-h] <cache size> <associativity> <block size> <replace alg> <write policy> <trace file> */ //God willing I come up with a better Hex to Bin convertion that maintains the beginning 0s... void hex2bin(char input[], char output[]) { int i; int a = 0; int b = 1; int c = 2; int d = 3; int x = 4; int size; size = strlen(input); for (i = 0; i < size; i++) { if (input[i] =='0') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='1') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='2') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='3') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='x') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='5') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='6') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='7') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='8') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='9') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='a') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='b') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='c') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='d') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='e') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='f') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '1'; } } output[32] = '\0'; } int main(int argc, char* argv[]) { FILE *tracefile; char readwrite; int trash; int cachesize; int blocksize; int setnumber; int blockbytes; int setbits; int blockbits; int tagsize; int m; int count = 0; int count2 = 0; int count3 = 0; int i; int j; int xindex; int jindex; int kindex; int lindex; int setadd; int totalset; int writeMiss = 0; int writeHit = 0; int cacheMiss = 0; int cacheHit = 0; int read = 0; int write = 0; int size; int extra; char bbits[100]; char sbits[100]; char tbits[100]; char output[100]; char input[100]; char origtag[100]; if (argc != 7) { if (strcmp(argv[0], "-h")) { printf("./sim2 <cache size> <associativity> <block size> <replace alg> <write policy> <trace file>\n"); return 0; } else { fprintf(stderr, "Error: wrong number of parameters.\n"); return -1; } } tracefile = fopen(argv[6], "r"); if(tracefile == NULL) { fprintf(stderr, "Error: File is NULL.\n"); return -1; } //Determining size of sbits, bbits, and tag cachesize = atoi(argv[1]); blocksize = atoi(argv[3]); setnumber = (cachesize/blocksize); printf("setnumber: %d\n", setnumber); setbits = (round((log(setnumber))/(log(2)))); printf("sbits: %d\n", setbits); blockbits = log(blocksize)/log(2); printf("bbits: %d\n", blockbits); tagsize = 32 - (blockbits + setbits); printf("t: %d\n", tagsize); struct myCache newCache[setnumber]; //Allocating Space for Tag Bits, initiating tag and valid to 0s for(i=0;i<setnumber;i++) { newCache[i].tag = (char *)malloc(sizeof(char)*(tagsize+1)); for(j=0;j<tagsize;j++) { newCache[i].tag[j] = '0'; } newCache[i].valid = 0; } while(fgetc(tracefile)!='#') { setadd = 0; totalset = 0; //read in file fseek(tracefile,-1,SEEK_CUR); fscanf(tracefile, "%x: %c %s\n", &trash, &readwrite, origtag); //shift input Hex size = strlen(origtag); extra = (10 - size); for(i=0; i<extra; i++) input[i] = '0'; for(i=extra, j=0; i<(size-(2-extra)); j++, i++) input[i]=origtag[j+2]; input[8] = '\0'; // Convert Hex to Binary hex2bin(input, output); //Resolving the Address into tbits, sbits, bbits for (xindex=0, jindex=(32-blockbits); jindex<32; jindex++, xindex++) { bbits[xindex] = output[jindex]; } bbits[xindex]='\0'; for (xindex=0, kindex=(32-(blockbits+setbits)); kindex<32-(blockbits); kindex++, xindex++){ sbits[xindex] = output[kindex]; } sbits[xindex]='\0'; for (xindex=0, lindex=0; lindex<(32-(blockbits+setbits)); lindex++, xindex++){ tbits[xindex] = output[lindex]; } tbits[xindex]='\0'; //Convert set bits from char array into ints for(xindex = 0, kindex = (setbits -1); xindex < setbits; xindex ++, kindex--) { if (sbits[xindex] == '1') setadd = 1; if (sbits[xindex] == '0') setadd = 0; setadd = setadd * pow(2, kindex); totalset += setadd; } //Calculating Hits and Misses if (newCache[totalset].valid == 0) { newCache[totalset].valid = 1; strcpy(newCache[totalset].tag, tbits); } else if (newCache[totalset].valid == 1) { if(strcmp(newCache[totalset].tag, tbits) == 0) { if (readwrite == 'W') { cacheHit++; write++; } if (readwrite == 'R') cacheHit++; } else { if (readwrite == 'R') { cacheMiss++; read++; } if (readwrite == 'W') { cacheMiss++; read++; write++; } strcpy(newCache[totalset].tag, tbits); } } } printf("Hits: %d\n", cacheHit); printf("Misses: %d\n", cacheMiss); printf("Writes: %d\n", write); printf("Reads: %d\n", read); }

Read the article

Is it possible to run an ng-switch directly on a select > option

- by Asok

Has anyone been able to run an ng-switch on a <select> -> <option> tag, like so?: <select ng-model="form.permitLocality" ng-switch on="localityTypeRadio"> <option ng-switch-when="County" ng-repeat="county in countyList"> {{ county.name }} </option> <option ng-switch-when="City" ng-repeat="city in cityList"> {{ city.name }} </option> <option ng-switch-when="Town" ng-repeat="town in townList"> {{ town.name }} </option> </select> I am not getting any errors or any options (all values verified), I just thought it would save me a couple lines and thought I'd try it. Here is my selector, in case you're curious (value verified): <label class="radio inline"> <input type="radio" name="localityTypeRadio" ng-model="localityTypeRadio" value="County"> County </label> <label class="radio inline"> <input type="radio" name="localityTypeRadio" ng-model="localityTypeRadio" value="City"> City </label> <label class="radio inline"> <input type="radio" name="localityTypeRadio" ng-model="localityTypeRadio" value="Town"> Town </label> This is not a big deal, just didn't know if this was a limitation / not recommended with an ng-switch EDIT I was mistaken when I initially said that nothing was happening (browser caching), there appears to be the correct number of options but the source code shows nothing but white space: <select ng-model="form.permitLocality" class="input-block-level ng-pristine ng-valid" ng-switch="" on="localityTypeRadio" ng-hide="form.permitLocality.length"><option value="? string: ?"></option>  <option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option><option ng-switch-when="City" ng-repeat="city in cityList" class="ng-scope ng-binding" value=" "> </option>  </select>

Read the article

Obj-msg-send error in numberOfSectionsInTableView

- by mukeshpawar

import "AddBillerCategoryViewController.h" import "Globals.h" import "AddBillerViewController.h" import "AddBillerListViewController.h" import"KlinnkAppDelegate.h" @implementation AddBillerCategoryViewController @synthesize REASON, RESPVAR, currentAttribute,tbldata,strOptions; // This recipe adds a title for each section //Initialize the table view controller with the grouped style (AddBillerCategoryViewController *) init { if (self = [super initWithStyle:UITableViewStyleGrouped]);// self.title = @"Crayon Colors"; return self; } -(void)showBack { [[self navigationController] pushViewController:[[AddBillerViewController alloc] init] animated:YES]; } (void)navigationController:(UINavigationController *)navigationController willShowViewController:(UIViewController *)viewController animated:(BOOL)animated { if ([viewController isKindOfClass:[AddBillerCategoryViewController class]]) { AddBillerCategoryViewController *controller = (AddBillerCategoryViewController *)viewController; [controller.tbldata reloadData]; } } (void)viewDidLoad { appDelegate = (KlinnkAppDelegate *)[[UIApplication sharedApplication] delegate]; appDelegate.catListArray.count; // Uncomment the following line to display an Edit button in the navigation bar for this view controller. // self.navigationItem.rightBarButtonItem = self.editButtonItem; //self.navigationItem.leftBarButtonItem = [[[UIBarButtonItem alloc] // initWithTitle:@"Back" // style:UIBarButtonItemStylePlain // target:self // action:@selector(showBack)] autorelease]; if(gotOK == 0) { //self.navigationItem.leftBarButtonItem.enabled = FALSE; dt = [[DateTime alloc] init]; strChannelID = @"IGLOO|MOBILE"; strDateTime = [dt findDateTime]; strTemp = [dt findSessionTime]; strSessionID = [appDelegate.KMobile stringByAppendingString:strTemp]; strResponseURL = @"http://115.113.110.139/Test/CbbpServerRequestHandler"; strResponseVar = @"serverResponseXML"; strRequestType = @"GETCATEGORY"; NSLog(@"Current Session id - %@", strSessionID); //conn = [[NSURLConnection alloc] init]; receivedData = [[NSMutableData data] retain]; //.................... currentAttribute = [[NSMutableString alloc] init]; // create XMl xmlData = [[NSData alloc] init]; xmlData = [self createXML]; // XMl has been created now convert it in to string xmlString = [[NSString alloc] initWithData:xmlData encoding:NSASCIIStringEncoding]; // Ataching other infromatin to he xml parameterString = [[NSString alloc] initWithString:@"mobileRequestXML="]; requestString = [[NSString alloc] init]; requestString = [parameterString stringByAppendingString:xmlString]; // give space betn two element. requestString = [requestString stringByReplacingOccurrencesOfString:@"<" withString:@" <"]; // Initalizing other parameters postData = [requestString dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; postLength = [NSString stringWithFormat:@"%d",[postData length]]; firstRequest = [[[NSMutableURLRequest alloc] init] autorelease]; REASON = [[NSMutableString alloc] init]; RESPVAR = [[NSMutableString alloc] init]; NSLog(@"\n \n Sending for 1st time........\n"); [self sendRequest]; NSLog(@"\n \n Sending for 2nd time........\n"); [self sendRequest]; NSLog(@"\n \n both request send........\n \n "); } //[tbldata reloadData]; [self retain]; [super viewDidLoad]; } -(void)sendRequest { finished = FALSE; NSLog(@"\n Sending Request \n\n %@", requestString); conn = [[NSURLConnection alloc] init]; if(gotOK == 0) [firstRequest setURL:[NSURL URLWithString:@"http://115.113.110.139/Test/CbbpMobileRequestHandler"]]; if(gotOK == 1) { [firstRequest setURL:[NSURL URLWithString:@"http://115.113.110.139//secure"]]; gotOK = 2; } [firstRequest setHTTPMethod:@"POST"]; [firstRequest setValue:postLength forHTTPHeaderField:@"Content-Length"]; [firstRequest setValue:@"application/x-www-form-urlencoded" forHTTPHeaderField:@"Content-Type"]; [firstRequest setHTTPBody:postData]; conn = [conn initWithRequest:firstRequest delegate:self startImmediately:YES]; [conn start]; while(!finished) { [[NSRunLoop currentRunLoop] runMode:NSDefaultRunLoopMode beforeDate:[NSDate distantFuture]]; } if (conn) { //receivedData = [[NSMutableData data] retain]; NSLog(@"\n\n Received %d bytes of data",[receivedData length]); } else { NSLog(@"\n Not responding"); } } (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response { NSLog(@" \n Send didReciveResponse"); [receivedData setLength:0]; } (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { NSLog(@" \n Send didReciveData"); [receivedData appendData:data]; } (void)connectionDidFinishLoading:(NSURLConnection *)connection { finished = TRUE; NSLog(@" \n Send didFinishLaunching"); // do something with the data // receivedData is declared as a method instance elsewhere NSLog(@"\n\n Succeeded! DIDFINISH Received %d bytes of data\n\n ",[receivedData length]); NSString *aStr = [[NSString alloc] initWithData:receivedData encoding:NSASCIIStringEncoding]; NSLog(aStr); //[conn release]; if([aStr isEqualToString:@"OK"]) gotOK = 1; NSLog(@" Value of gotOK - %d", gotOK); if(gotOK == 2) { responseData = [aStr dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:YES]; parser = [[NSXMLParser alloc] initWithData:responseData]; [parser setDelegate:self]; NSLog(@"\n start parsing"); [parser parse]; NSLog(@"\n PArsing over"); NSLog(@"\n check U / S and the RESVAR is - %@",RESPVAR); NSRange textRange; textRange =[aStr rangeOfString:@"<"]; if(textRange.location != NSNotFound) { if([RESPVAR isEqualToString:@"U"]) { self.navigationItem.rightBarButtonItem.enabled = TRUE; self.navigationItem.leftBarButtonItem.enabled = TRUE; NSLog(@" \n U......."); UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Error" message:REASON delegate:self cancelButtonTitle:nil otherButtonTitles:@"OK", nil]; [alert show]; [alert release]; } if([RESPVAR isEqualToString:@"S"]) { NSLog(@"\n S........"); [[self navigationController] pushViewController:[[AddBillerCategoryViewController alloc] init] animated:YES]; //[self viewDidLoad]; //[tbldata reloadData]; } } else { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Connection Problem" message:@"Enable to process your request at this time. Please try again." delegate:self cancelButtonTitle:nil otherButtonTitles:@"OK", nil]; [alert show]; [alert release]; //self.navigationItem.leftBarButtonItem.enabled = TRUE; } } NSLog(@"\n Last line of connectionDidFinish "); //[tableView reloadData]; } -(NSData *)createXML { NSString *strXmlNode = @" channel alliaceid session reqtype responseurl responsevar "; NSString *tempchannel = [strXmlNode stringByReplacingOccurrencesOfString:@"channel" withString:strChannelID options:NSBackwardsSearch range:NSMakeRange(0, [strXmlNode length])]; NSString *tempalliance = [tempchannel stringByReplacingOccurrencesOfString:@"alliaceid" withString:@"WALLET365" options:NSBackwardsSearch range:NSMakeRange(0, [tempchannel length])]; NSString *tempsession = [tempalliance stringByReplacingOccurrencesOfString:@"session" withString:strSessionID options:NSBackwardsSearch range:NSMakeRange(0, [tempalliance length])]; NSString *tempreqtype = [tempsession stringByReplacingOccurrencesOfString:@"reqtype" withString:strRequestType options:NSBackwardsSearch range:NSMakeRange(0,[tempsession length])]; NSString *tempresponseurl = [tempreqtype stringByReplacingOccurrencesOfString:@"responseurl" withString:strResponseURL options:NSBackwardsSearch range:NSMakeRange(0, [tempreqtype length])]; NSString *tempresponsevar = [tempresponseurl stringByReplacingOccurrencesOfString:@"responsevar" withString:strResponseVar options:NSBackwardsSearch range:NSMakeRange(0,[tempresponseurl length])]; NSData *data= [[NSString stringWithString:tempresponsevar] dataUsingEncoding:NSUTF8StringEncoding]; return data; } (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName attributes:(NSDictionary *)attributeDict { if([elementName isEqualToString:@"RESPVAL"]) currentAttribute = [NSMutableString string]; if([elementName isEqualToString:@"REASON"]) currentAttribute = [NSMutableString string]; if([elementName isEqualToString:@"COUNT"]) currentAttribute = [NSMutableString string]; if([elementName isEqualToString:@"CATNAME"]) currentAttribute = [NSMutableString string]; } (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName { if([elementName isEqualToString:@"RESPVAL"]) { [RESPVAR setString:currentAttribute]; //NSLog(@"\n Response VAR - %@", RESPVAR); } if([elementName isEqualToString:@"REASON"]) { [REASON setString:currentAttribute]; //NSLog(@"\n Reason - %@", REASON); } if([elementName isEqualToString:@"COUNT"]) { NSString *temp1 = [[NSString alloc] init]; temp1 = [temp1 stringByAppendingString:currentAttribute]; catCount = [temp1 intValue]; [temp1 release]; //NSLog(@"\n Cat Count - %d", catCount); } if([elementName isEqualToString:@"CATNAME"]) { [appDelegate.catListArray addObject:[NSString stringWithFormat:currentAttribute]]; //NSLog(@"%@", appDelegate.catListArray); } } (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { if(self.currentAttribute) [self.currentAttribute setString:string]; } /* (void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; } */ /* (void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; } */ /* (void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; } */ /* (void)viewDidDisappear:(BOOL)animated { [super viewDidDisappear:animated]; } */ /* // Override to allow orientations other than the default portrait orientation. (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } */ (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Releases the view if it doesn't have a superview // Release anything that's not essential, such as cached data } pragma mark Table view methods -(NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } // Customize the number of rows in the table view. -(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { KlinnkAppDelegate *appDelegated = (KlinnkAppDelegate *)[[UIApplication sharedApplication] delegate]; return appDelegated.catListArray.count; } // Customize the appearance of table view cells. (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; } // Set up the cell... AddBillerCategoryViewController *mbvc = (AddBillerCategoryViewController *)[appDelegate.catListArray objectAtIndex:indexPath.row]; [cell setText:mbvc.strOptions]; return cell; } (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Navigation logic may go here. Create and push another view controller. // AnotherViewController *anotherViewController = [[AnotherViewController alloc] initWithNibName:@"AnotherView" bundle:nil]; // [self.navigationController pushViewController:anotherViewController]; // [anotherViewController release]; gotOK = 0; int j = indexPath.row; appDelegate.catName = [[NSString alloc] init]; appDelegate.catName = [appDelegate.catName stringByAppendingString:[appDelegate.catListArray objectAtIndex:j]]; [[self navigationController] pushViewController:[[AddBillerListViewController alloc] init] animated:YES]; } /* // Override to support conditional editing of the table view. (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the specified item to be editable. return YES; } */ /* // Override to support editing the table view. (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { if (editingStyle == UITableViewCellEditingStyleDelete) { // Delete the row from the data source [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:YES]; } else if (editingStyle == UITableViewCellEditingStyleInsert) { // Create a new instance of the appropriate class, insert it into the array, and add a new row to the table view } } */ /* // Override to support rearranging the table view. (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { } */ /* // Override to support conditional rearranging of the table view. (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the item to be re-orderable. return YES; } */ (void)dealloc { [REASON release]; [RESPVAR release]; [currentAttribute release]; [tbldata release]; [super dealloc]; } @end In the Above code .. numberOfSectionsInTableView ,i get error of obj-msg-send i have intialize the array catlist and even not released it anywhere still why i am getting this error please help me i am badly stuck' thanks in advacnce

Read the article

How to recursively delete some xml elements using XSLT

- by Monomachus

Hi, So I got this situation which sucks. I have an XML like this <table border="1" cols="200 100pt 200"> <tr> <td>isbn</td> <td>title</td> <td>price</td> </tr> <tr> <td /> <td /> <td> <span type="champsimple" id="9b297fb5-d12b-46b1-8899-487a2df0104e" categorieid="a1c70692-0427-425b-983c-1a08b6585364" champcoderef="01f12b93-b4c5-401b-9da1-c9385d77e43f"> [prénom] </span> <span type="champsimple" id="e103a6a5-d1be-4c34-8a54-d234179fb4ea" categorieid="a1c70692-0427-425b-983c-1a08b6585364" champcoderef="01f12b93-b4c5-401b-9da1-c9385d77e43f">[nom]</span> <span></span> </td> </tr> <tr></tr> <tr> <td></td> <td>Phill It in</td> </tr> <tr> <table id="cas1"> <tr> <td ></td> <td >foo</td> </tr> <tr> <td >bar</td> <td >boo</td> </tr> </table> </tr> <tr> <table id="cas2"> <tr> <td ></td> <td >foo</td> </tr> <tr> <td ></td> <td >boo</td> </tr> </table> </tr> <tr> <table id="cas3"> <tr> <td >bar</td> <td ></td> </tr> <tr> <td >foo</td> <td >boo</td> </tr> </table> </tr> <tr> <table id="cas4"> <tr> <td /> <td /> </tr> <tr> <td>foo</td> <td>boo</td> </tr> </table> </tr> <table id="cas4"> <tr> <td /> <td /> </tr> <tr> <td>foo</td> <td>boo</td> </tr> </table> <tr> <td /> <td /> </tr> </table> Now the question is how would I recursively delete all empty td, tr and table elements? Now I use this XSLT <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output omit-xml-declaration="yes" indent="yes"/> <xsl:strip-space elements="*" /> <xsl:template match="node()|@*"> <xsl:copy> <xsl:apply-templates select="node()|@*"/> </xsl:copy> </xsl:template> <xsl:template match="td[not(node())]" /> <xsl:template match="tr[not(node())]" /> <xsl:template match="table[not(node())]" /> </xsl:stylesheet> But it doesn't do very well. After I delete td, a tr becomes empty but it doesn't handle that. Too bad. See the table element with "cas4". <table border="1" cols="200 100pt 200"> <tr> <td>isbn</td> <td>title</td> <td>price</td> </tr> <tr> <td> <span type="champsimple" id="9b297fb5-d12b-46b1-8899-487a2df0104e" categorieid="a1c70692-0427-425b-983c-1a08b6585364" champcoderef="01f12b93-b4c5-401b-9da1-c9385d77e43f"> [prénom] </span> <span type="champsimple" id="e103a6a5-d1be-4c34-8a54-d234179fb4ea" categorieid="a1c70692-0427-425b-983c-1a08b6585364" champcoderef="01f12b93-b4c5-401b-9da1-c9385d77e43f">[nom]</span> <span /> </td> </tr> <tr> <td>Phill It in</td> </tr> <tr> <table id="cas1"> <tr> <td>foo</td> </tr> <tr> <td>bar</td> <td>boo</td> </tr> </table> </tr> <tr> <table id="cas2"> <tr> <td>foo</td> </tr> <tr> <td>boo</td> </tr> </table> </tr> <tr> <table id="cas3"> <tr> <td>bar</td> </tr> <tr> <td>foo</td> <td>boo</td> </tr> </table> </tr> <tr> <table id="cas4"> <tr /> <tr> <td>foo</td> <td>boo</td> </tr> </table> </tr> <table id="cas4"> <tr /> <tr> <td>foo</td> <td>boo</td> </tr> </table> <tr /> </table> How would you solve this problem?

Read the article

Getting problem in collision detection in Java Game

- by chetans

Hi I am developing Spaceship Game in which i am getting problem in collision detection of moving images Game has a spaceship and number of asteroids(obstacles) i want to detect the collision between them How can i do this?`package Game; import java.applet.Applet; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Image; import java.awt.MediaTracker; import java.awt.event.KeyEvent; import java.awt.event.KeyListener; import java.net.MalformedURLException; import java.net.URL; public class ThreadInApplet extends Applet implements KeyListener { private static final long serialVersionUID = 1L; Image[] asteroidImage; Image spaceshipImage; int[] XPosObst,YPosObst; int numberOfObstacles=0,XPosOfSpaceship,YPosOfSpaceship; int spaceButtnCntr=0,noOfObstaclesLevel=20; boolean gameStart=false,collideUp=false,collideDown=false,collideLeft=false,collideRight=false; private Image offScreenImage; private Dimension offScreenSize,d; private Graphics offScreenGraphics; int speedObstacles=1; String spaceshipImagePath="images/spaceship.png",obstacleImagepath="images/asteroid.png"; String buttonToStart="Press Space to start"; public void init() { try { asteroidImage=new Image[noOfObstaclesLevel]; XPosObst=new int[noOfObstaclesLevel]; YPosObst=new int[noOfObstaclesLevel]; XPosOfSpaceship=getWidth()/2-35; YPosOfSpaceship=getHeight()-100; spaceshipImage=getImage(new URL(getCodeBase(),spaceshipImagePath)); for(int i=0;i<noOfObstaclesLevel;i++) { asteroidImage[i]=getImage(new URL(getCodeBase(),obstacleImagepath)); XPosObst[i]=(int) (Math.random()*700); YPosObst[i]=0; } MediaTracker tracker = new MediaTracker (this); for(int i=0;i<noOfObstaclesLevel;i++) { tracker.addImage (asteroidImage[i], 0); } } catch (MalformedURLException e) { e.printStackTrace(); } setBackground(Color.black); addKeyListener(this); } public void paint(Graphics g) { g.setColor(Color.white); if(gameStart==false) { g.drawString(buttonToStart, (getWidth()/2)-60, getHeight()/2); } g.drawString("HEADfitted Solutions Pvt.Ltd.", (getWidth()/2)-80, getHeight()-20); for(int n=0;n<numberOfObstacles;n++) { if(n>0) g.drawImage(asteroidImage[n],XPosObst[n],YPosObst[n],this); } g.drawImage(spaceshipImage,XPosOfSpaceship,YPosOfSpaceship,this); } @SuppressWarnings("deprecation") public void update(Graphics g) { d = size(); if((offScreenImage == null) || (d.width != offScreenSize.width) || (d.height != offScreenSize.height)) { offScreenImage = createImage(d.width, d.height); offScreenSize = d; offScreenGraphics = offScreenImage.getGraphics(); } offScreenGraphics.clearRect(0, 0, d.width, d.height); paint(offScreenGraphics); g.drawImage(offScreenImage, 0, 0, null); } public void keyReleased(KeyEvent arg0){} public void keyTyped(KeyEvent arg0) {} Thread mainThread=new Thread() { synchronized public void run () { try { //System.out.println("in main thread"); if (gameStart==true) { moveObstacles.start(); if(collide()==false) { createObsThread.start(); } } } catch (Exception e) { e.printStackTrace(); } } }; Thread createObsThread=new Thread() { synchronized public void run () { if (spaceButtnCntr==1) { if (collide()==false) { for(int g=0;g<noOfObstaclesLevel;g++) { try { sleep(1000); } catch (InterruptedException e) { e.printStackTrace(); } numberOfObstacles++; } } } } }; Thread moveObstacles=new Thread() // Moving Obstacle images downwards after every 10 ms { synchronized public void run () { while(YPosObst[19]!=600) { if (collide()==false) { //createObsThread.start(); for(int l=0;l } repaint(); try { sleep(10); } catch (InterruptedException e) { e.printStackTrace(); } } } } }; public void keyPressed(KeyEvent e) { if(e.getKeyCode()==32) { gameStart=true; spaceButtnCntr++; if (spaceButtnCntr==1) { mainThread.start(); } } if(gameStart==true) { if(e.getKeyCode()==37 && collideLeft==false)//Spaceship movement left { new Thread () { synchronized public void run () { XPosOfSpaceship-=10; repaint(); } }.start(); } if(e.getKeyCode()==38 && collideUp==false)//Spaceship movement up { new Thread () { synchronized public void run () { YPosOfSpaceship-=10; repaint(); } }.start(); } if(e.getKeyCode()==39 && collideRight==false)//Spaceship movement right { new Thread () { synchronized public void run () { XPosOfSpaceship+=10; repaint(); } }.start(); } if(e.getKeyCode()==40 && collideDown==false)//Spaceship movement down { new Thread () { synchronized public void run () { YPosOfSpaceship+=10; repaint(); } }.start(); } } } /*public boolean collide() { int x0, y0, w0, h0, x2, y2, w2, h2; x0=XPosOfSpaceship; y0=YPosOfSpaceship; h0=spaceshipImage.getHeight(null); w0=spaceshipImage.getWidth(null); for(int i=0;i<20;i++) { x2=XPosObst[i]; y2=YPosObst[i]; h2=asteroidImage[i].getHeight(null); w2=asteroidImage[i].getWidth(null); if ((x0 > (x2 + w2)) || ((x0 + w0) < x2)) return false; System.out.println(x2+" "+y2+" "+h2+" "+w2); if ((y0 > (y2 + h2)) || ((y0 + h0) < y2)) return false; } return true; }*/ public boolean collide() { int x1,y1,x2,y2,x3,y3,x4,y4; //coordinates of obstacles int a1,b1,a2,b2,a3,b3,a4,b4; //coordinates of spaceship a1 =XPosOfSpaceship; b1=YPosOfSpaceship; a2=a1+spaceshipImage.getWidth(this); b2=b1; a3=a1; b3=b1+spaceshipImage.getHeight(this); a4=a2; b4=b3; for(int a=0;a if(x1>=a1 && x1<=a2 && x1<=b3 && x1>=b1) return (true); if(x2>=a1 && x2<=a2 && x2<=b3 && x2>=b1) return(true); //********checking asteroid touch spaceship from up direction******** if(y3==b1 && x4>=a1 && x4<=a2) { collideUp = true; return(true); } if(y3==b1 && x3>=a1 && x3<=a2) { collideUp = true; return(true); } //********checking asteroid touch spaceship from left direction****** if(x2==a1 && y4>=b1 && y4<=b3) { collideLeft=true; return(true); } if(x2==a1 && y2>=b1 && y2<=b3) { collideLeft=true; return(true); } //********checking asteroid touch spaceship from right direction***** if(x1==a2 && y3>=b2 && y3<=b4) { collideRight=true; return(true); } if(x1==a2 && y1>=b2 && y1<=b4) { collideRight=true; return(true); } //********checking asteroid touch spaceship from down direction***** if(y1==b3 && x2>=a3 && x2<=a4) { collideDown=true; return(true); } if(y1==b3 && x1>=a3 && x1<=a4) { collideDown=true; return(true); } else { collideUp=false; collideDown=false; collideLeft=false; collideRight=false; } } return(false); } } `

Read the article

Background Image not showing up in IE8

- by Davey

So I have a tiny header image that repeats on the x axis, but for some reason it won't show up in IE8. Anyone know a work around? Thanks in advanced. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <meta content='' name='description' /> <meta content='' name='keywords' /> <link rel="stylesheet" type="text/css" href="style.css" media="screen" /> <title>Book Site</title> </head> <body> <div id="wrapper"> <div id="header"> <div id="title"> <span class="maintitle">Site Title Goes Here</span> <br /> <span class="subtitle">Transitional Justice, Post-Conflict Reconstruction & Reconciliation in Rwanda and Beyond Phil Clark and Zachary D. Kaufman, editors</span> </div> <img class="thebook" src="images/thebook.png" /> <span class="bookblurb"> <span class="bookbuy">Buy the book</span> get it online <br /> from Columbia, Hurst or your favorite reseller </span> </div> <div id="navbar"> <ul> <li>HOME</li> <li>ABOUT THE BOOK</li> <li>AUTHORS</li> <li>NEWS & EVENTS</li> <li>KIGALI PUBLIC LIBRARY</li> <li>CONTACT US</li> </ul> </div> <div id="content"> <div id="blockone"> <div id="polaroid"> <img class="polaroid" src="images/polaroid.png" /> <br /> <span class="roidplace">Gisimba Memorial Centre</span> <br /> <span class="roidname">Kigali, Rwanda</span> </div> <div id="textblockone"> <h3>An incisive analysis of genocide and its aftermath</h3> <br /> <span class="description">In After Genocide leading scholars and practitioners analyse the political, legal and regional impact of events in post-genocide Rwanda within the broader themes of transitional justice, reconstruction and reconciliation. Given the forthcoming fifteenth anniversary of the Rwandan genocide, and continued mass violence in Africa, especially in Darfur, the Democratic Republic of Congo (DRC) and northern Uganda, this volume is unquestionably of continuing relevance. </span> </div> </div> <div id="form"> <div id="statement"> This book should be labeled for the mature individual only. But for that mature individual it is of extreme interest. It shows, far from any Manichean stereotyping, the many facets of having to try to live in an impossibly complex social and human situation. Highly recommended. <br /><br /> <span class="author">-Grard Prunier</span> <br /><span class="bookname">The Rwanda Crisis: History of a Genocide (Hurst, 1995)</span> </div> <div id="contactform"> <span class="contactus">Contact us for additional information and site updates</span> <br /> <span class="theform"> <form class="forming"> Name: <input type="text" name="firstname" /> <br /> Title: <input type="text" name="title" /> <br /> Institution: <input type="text" name="institution" /> <br /> Email: <input type="text" name="email" /> <br /> Message: <input type="text" name="message" class="message" /> </form> </span> </div> </div> </div> <div id="footer"> <p class="footernav">© 2008 After Genocide <span class="footerlinks">Sitemap | Terms | Privacy | Contact </span> <span class="plug">Web design by <span class="avity">Avity</span> </p> </div> </div> </body> </html> ----------------css------------------- html, body { margin:0; padding:0; background-color:#fdffe3; font-family: Arial, Helvetica, sans-serif; } #wrapper { width:1020px; margin:0 auto; } /*begin header style*/ #header { background:url("images/headback.png")repeat-x; width:1020px; height:120px; font-family:arial; position:relative; } #title { width:565px; height:100px; float:left; margin:20px 0 0 100px; } .maintitle { font-size:40px; } .subtitle { font-size:13px; } .thebook { float:left; margin:10px 0 0 30px; border:2px solid #666666; } .bookblurb { float:left; width:110px; margin:15px 0 0 15px; font-size:13px; } .bookbuy { font-weight:bold; font-size:14px; } /*end header style*/ /*begin navigation style*/ #navbar { margin:5px 0 0 0; height: 30px; width: 1020px; background-color: #3a3e30; } #navbar ul { padding: 0px; font-family: Arial, Helvetica, sans-serif; font-size: 12px; color: #FFF; line-height: 30px; white-space: nowrap; margin:0 0 0 140px; } #navbar ul li { list-style-type: none; display: inline; margin:0 40px 0 0; } /*end navigation style*/ /*begin content style*/ #content { width:775px; margin:0 auto; } #blockone { margin:25px 0 0 0; } #polaroid { float:left; width:230px; } .roidplace { font-weight:bold; font-size:11px; } .roidname { font-size:11px; margin:0 0 0 40px; } #textblockone { width:745px; margin:0 0 0 0; font-family: Arial, Helvetica, sans-serif; } .description { font-size:13px; } #form { background:url("images/formbackround.png") no-repeat; width:758px; height:231px; margin:80px 0 0 10px; } #statement { width:320px; margin:30px 0 0 30px; position:absolute; font-size:15px; font-style:italic; float:left; } .author { font-weight:bold; font-size:14; } .bookname { font-weight:bold; font-size:11px; color:#3f91ad; } #contactform { float:right; width:320px; margin:20px 30px 0 0; } .contactus { font-weight:bold; font-size:12px; } .theform { } .forming { } .message { height:50px; } #footer { width:1020px; height:65px; background-color:#dfdacc; margin:35px 0 0 0; font-size:13px; font-weight:bold; } .footernav { margin:30px 0 0 150px; position:absolute; width:1020px; } .footerlinks { margin:0 10px 0 10px; color:#0f77a9; } .plug { margin:0 0 0 175px; } .avity { color:#0f77a9; } Live site: http://cheapramen.com/testsite/

Read the article

Valgrind says "stack allocation," I say "heap allocation"

- by Joel J. Adamson

Dear Friends, I am trying to trace a segfault with valgrind. I get the following message from valgrind: ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C5: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) ==3683== ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C7: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) However, here's the offending line: /* allocate mating table */ age_dep_data->mtable = malloc (age_dep_data->geno * sizeof (double *)); if (age_dep_data->mtable == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); for (int j = 0; j < age_dep_data->geno; j++) { 131=> age_dep_data->mtable[j] = calloc (age_dep_data->geno, sizeof (double)); if (age_dep_data->mtable[j] == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); } What gives? I thought any call to malloc or calloc allocated heap space; there is no other variable allocated here, right? Is it possible there's another allocation going on (the offending stack allocation) that I'm not seeing? You asked to see the code, here goes: /* Copyright 2010 Joel J. Adamson <[email protected]> $Id: age_dep.c 1010 2010-04-21 19:19:16Z joel $ age_dep.c:main file Joel J. Adamson -- http://www.unc.edu/~adamsonj Servedio Lab University of North Carolina at Chapel Hill CB #3280, Coker Hall Chapel Hill, NC 27599-3280 This file is part of an investigation of age-dependent sexual selection. This code is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with haploid. If not, see <http://www.gnu.org/licenses/>. */ #include "age_dep.h" /* global variables */ extern struct argp age_dep_argp; /* global error message variables */ char * nullmsg = "Null pointer: %i"; /* error message for conversions: */ char * errmsg = "Representation error: %s"; /* precision for formatted output: */ const char prec[] = "%-#9.8f "; const size_t age_max = AGEMAX; /* maximum age of males */ static int keep_going_p = 1; int main (int argc, char ** argv) { /* often used counters: */ int i, j; /* read the command line */ struct age_dep_args age_dep_args = { NULL, NULL, NULL }; argp_parse (&age_dep_argp, argc, argv, 0, 0, &age_dep_args); /* set the parameters here: */ /* initialize an age_dep_params structure, set the members */ age_dep_params_t * params = malloc (sizeof (age_dep_params_t)); if (params == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); age_dep_init_params (params, &age_dep_args); /* initialize frequencies: this initializes a list of pointers to initial frqeuencies, terminated by a NULL pointer*/ params->freqs = age_dep_init (&age_dep_args); params->by = 0.0; /* what range of parameters do we want, and with what stepsize? */ /* we should go from 0 to half-of-theta with a step size of about 0.01 */ double from = 0.0; double to = params->theta / 2.0; double stepsz = 0.01; /* did you think I would spell the whole word? */ unsigned int numparts = floor(to / stepsz); do { #pragma omp parallel for private(i) firstprivate(params) \ shared(stepsz, numparts) for (i = 0; i < numparts; i++) { params->by = i * stepsz; int tries = 0; while (keep_going_p) { /* each time through, modify mfreqs and mating table, then go again */ keep_going_p = age_dep_iterate (params, ++tries); if (keep_going_p == ERANGE) error (ERANGE, ERANGE, "Failure to converge\n"); } fprintf (stdout, "%i iterations\n", tries); } /* for i < numparts */ params->freqs = params->freqs->next; } while (params->freqs->next != NULL); return 0; } inline double age_dep_pmate (double age_dep_t, unsigned int genot, double bp, double ba) { /* the probability of mating between these phenotypes */ /* the female preference depends on whether the female has the preference allele, the strength of preference (parameter bp) and the male phenotype (age_dep_t); if the female lacks the preference allele, then this will return 0, which is not quite accurate; it should return 1 */ return bits_isset (genot, CLOCI)? 1.0 - exp (-bp * age_dep_t) + ba: 1.0; } inline double age_dep_trait (int age, unsigned int genot, double by) { /* return the male trait, a function of the trait locus, age, the age-dependent scaling parameter (bx) and the males condition genotype */ double C; double T; /* get the male's condition genotype */ C = (double) bits_popcount (bits_extract (0, CLOCI, genot)); /* get his trait genotype */ T = bits_isset (genot, CLOCI + 1)? 1.0: 0.0; /* return the trait value */ return T * by * exp (age * C); } int age_dep_iterate (age_dep_params_t * data, unsigned int tries) { /* main driver routine */ /* number of bytes for female frequencies */ size_t geno = data->age_dep_data->geno; size_t genosize = geno * sizeof (double); /* female frequencies are equal to male frequencies at birth (before selection) */ double ffreqs[geno]; if (ffreqs == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); /* do not set! Use memcpy (we need to alter male frequencies (selection) without altering female frequencies) */ memmove (ffreqs, data->freqs->freqs[0], genosize); /* for (int i = 0; i < geno; i++) */ /* ffreqs[i] = data->freqs->freqs[0][i]; */ #ifdef PRMTABLE age_dep_pr_mfreqs (data); #endif /* PRMTABLE */ /* natural selection: */ age_dep_ns (data); /* normalized mating table with new frequencies */ age_dep_norm_mtable (ffreqs, data); #ifdef PRMTABLE age_dep_pr_mtable (data); #endif /* PRMTABLE */ double * newfreqs; /* mutate here */ /* i.e. get the new frequency of 0-year-olds using recombination; */ newfreqs = rec_mating (data->age_dep_data); /* return block */ { if (sim_stop_ck (data->freqs->freqs[0], newfreqs, GENO, TOL) == 0) { /* if we have converged, stop the iterations and handle the data */ age_dep_sim_out (data, stdout); return 0; } else if (tries > MAXTRIES) return ERANGE; else { /* advance generations */ for (int j = age_max - 1; j < 0; j--) memmove (data->freqs->freqs[j], data->freqs->freqs[j-1], genosize); /* advance the first age-class */ memmove (data->freqs->freqs[0], newfreqs, genosize); return 1; } } } void age_dep_ns (age_dep_params_t * data) { /* calculate the new frequency of genotypes given additive fitness and selection coefficient s */ size_t geno = data->age_dep_data->geno; double w[geno]; double wbar, dtheta, ttheta, dcond, tcond; double t, cond; /* fitness parameters */ double mu, nu; mu = data->wparams[0]; nu = data->wparams[1]; /* calculate fitness */ for (int j = 0; j < age_max; j++) { int i; for (i = 0; i < geno; i++) { /* calculate male trait: */ t = age_dep_trait(j, i, data->by); /* calculate condition: */ cond = (double) bits_popcount (bits_extract(0, CLOCI, i)); /* trait-based fitness term */ dtheta = data->theta - t; ttheta = (dtheta * dtheta) / (2.0 * nu * nu); /* condition-based fitness term */ dcond = CLOCI - cond; tcond = (dcond * dcond) / (2.0 * mu * mu); /* calculate male fitness */ w[i] = 1 + exp(-tcond) - exp(-ttheta); } /* calculate mean fitness */ /* as long as we calculate wbar before altering any values of freqs[], we're safe */ wbar = gen_mean (data->freqs->freqs[j], w, geno); for (i = 0; i < geno; i++) data->freqs->freqs[j][i] = (data->freqs->freqs[j][i] * w[i]) / wbar; } } void age_dep_norm_mtable (double * ffreqs, age_dep_params_t * params) { /* this function produces a single mating table that forms the input for recombination () */ /* i is female genotype; j is male genotype; k is male age */ int i,j,k; double norm_denom; double trait; size_t geno = params->age_dep_data->geno; for (i = 0; i < geno; i++) { double norm_mtable[geno]; /* initialize the denominator: */ norm_denom = 0.0; /* find the probability of mating and add it to the denominator */ for (j = 0; j < geno; j++) { /* initialize entry: */ norm_mtable[j] = 0.0; for (k = 0; k < age_max; k++) { trait = age_dep_trait (k, j, params->by); norm_mtable[j] += age_dep_pmate (trait, i, params->bp, params->ba) * (params->freqs->freqs)[k][j]; } norm_denom += norm_mtable[j]; } /* now calculate entry (i,j) */ for (j = 0; j < geno; j++) params->age_dep_data->mtable[i][j] = (ffreqs[i] * norm_mtable[j]) / norm_denom; } } My current suspicion is the array newfreqs: I can't memmove, memcpy or assign a stack variable then hope it will persist, can I? rec_mating() returns double *.

Read the article

Google Maps API v3 - Different markers/labels on different zoom levels

- by krikara

I was wondering if it is possible that Google has a feature to view different markers on different zoom levels. For example, on zoom level 1, I want one marker over China with the label saying "5". And as the user zooms in, lets say on zoom level 4, I want the previous marker and label to disappear. And I want to have 5 new markers/labels, each on a different city in China all saying "1". Thus China will say a number and all the cities in China will say numbers adding up to China's number. The key concept I am trying to figure out here is how to hide markers and labels based on zoom levels. A constraint for me is that I am living in China currently where google is censored, so a lot of online documents are censored for me, including many of google's documentations. Here is my code thus far <!DOCTYPE html> <html> <head> <meta name="viewport" content="initial-scale=1.0, user-scalable=no" /> <title>TM China</title> <style type="text/css"> html, body, #map_canvas { margin: 0; padding: 0; height: 100% } .labels { color: red; background-color: white; font-family: "Lucida Grande", "Arial", sans-serif; font-size: 10px; font-weight: bold; text-align: center; width: 60px; border: 2px solid black; white-space: nowrap; } </style> <script type="text/javascript" src="http://maps.googleapis.com/maps/api/js?key=AIzaSyDV0lcdK7C2GHbQAmdkBID70Uppuf-D030&sensor=true"> </script> <script type="text/javascript"> eval(function(p,a,c,k,e,r){e=function(c){return(c<a?'':e(parseInt(c/a)))+((c=c%a)>35?String.fromCharCode(c+29):c.toString(36))};if(!''.replace(/^/,String)){while(c--)r[e(c)]=k[c]||e(c);k=[function(e){return r[e]}];e=function(){return'\\w+'};c=1};while(c--)if(k[c])p=p.replace(new RegExp('\\b'+e(c)+'\\b','g'),k[c]);return p}('7 m(a){2.3=a;2.8=V.1E("1u");2.8.4.C="I: 1m; J: 1g;";2.k=V.1E("1u");2.k.4.C=2.8.4.C}m.l=E 6.5.22();m.l.1Y=7(){n c=2;n h=t;n f=t;n j;n b;n d,K;n i;n g=7(e){p(e.1v){e.1v()}e.2b=u;p(e.1t){e.1t()}};2.1s().24.G(2.8);2.1s().20.G(2.k);2.11=[6.5.9.w(V,"1o",7(a){p(f){a.s=j;i=u;6.5.9.r(c.3,"1n",a)}h=t;6.5.9.r(c.3,"1o",a)}),6.5.9.o(c.3.1P(),"1N",7(a){p(h&&c.3.1M()){a.s=E 6.5.1J(a.s.U()-d,a.s.T()-K);j=a.s;p(f){6.5.9.r(c.3,"1i",a)}F{d=a.s.U()-c.3.Z().U();K=a.s.T()-c.3.Z().T();6.5.9.r(c.3,"1e",a)}}}),6.5.9.w(2.k,"1d",7(e){c.k.4.1c="2i";6.5.9.r(c.3,"1d",e)}),6.5.9.w(2.k,"1D",7(e){c.k.4.1c=c.3.2g();6.5.9.r(c.3,"1D",e)}),6.5.9.w(2.k,"1C",7(e){p(i){i=t}F{g(e);6.5.9.r(c.3,"1C",e)}}),6.5.9.w(2.k,"1A",7(e){g(e);6.5.9.r(c.3,"1A",e)}),6.5.9.w(2.k,"1z",7(e){h=u;f=t;d=0;K=0;g(e);6.5.9.r(c.3,"1z",e)}),6.5.9.o(2.3,"1e",7(a){f=u;b=c.3.1b()}),6.5.9.o(2.3,"1i",7(a){c.3.O(a.s);c.3.D(2a)}),6.5.9.o(2.3,"1n",7(a){f=t;c.3.D(b)}),6.5.9.o(2.3,"29",7(){c.O()}),6.5.9.o(2.3,"28",7(){c.D()}),6.5.9.o(2.3,"27",7(){c.N()}),6.5.9.o(2.3,"26",7(){c.N()}),6.5.9.o(2.3,"25",7(){c.16()}),6.5.9.o(2.3,"23",7(){c.15()}),6.5.9.o(2.3,"21",7(){c.13()}),6.5.9.o(2.3,"1Z",7(){c.L()}),6.5.9.o(2.3,"1X",7(){c.L()})]};m.l.1W=7(){n i;2.8.1r.1q(2.8);2.k.1r.1q(2.k);1p(i=0;i<2.11.1V;i++){6.5.9.1U(2.11[i])}};m.l.1T=7(){2.15();2.16();2.L()};m.l.15=7(){n a=2.3.z("Y");p(H a.1S==="P"){2.8.W=a;2.k.W=2.8.W}F{2.8.G(a);a=a.1R(u);2.k.G(a)}};m.l.16=7(){2.k.1Q=2.3.1O()||""};m.l.L=7(){n i,q;2.8.S=2.3.z("R");2.k.S=2.8.S;2.8.4.C="";2.k.4.C="";q=2.3.z("q");1p(i 1L q){p(q.1K(i)){2.8.4[i]=q[i];2.k.4[i]=q[i]}}2.1l()};m.l.1l=7(){2.8.4.I="1m";2.8.4.J="1g";p(H 2.8.4.B!=="P"){2.8.4.1k="1j(B="+(2.8.4.B*1I)+")"}2.k.4.I=2.8.4.I;2.k.4.J=2.8.4.J;2.k.4.B=0.1H;2.k.4.1k="1j(B=1)";2.13();2.O();2.N()};m.l.13=7(){n a=2.3.z("X");2.8.4.1h=-a.x+"v";2.8.4.1f=-a.y+"v";2.k.4.1h=-a.x+"v";2.k.4.1f=-a.y+"v"};m.l.O=7(){n a=2.1G().1F(2.3.Z());2.8.4.12=a.x+"v";2.8.4.M=a.y+"v";2.k.4.12=2.8.4.12;2.k.4.M=2.8.4.M;2.D()};m.l.D=7(){n a=(2.3.z("14")?-1:+1);p(H 2.3.1b()==="P"){2.8.4.A=2h(2.8.4.M,10)+a;2.k.4.A=2.8.4.A}F{2.8.4.A=2.3.1b()+a;2.k.4.A=2.8.4.A}};m.l.N=7(){p(2.3.z("1a")){2.8.4.Q=2.3.2f()?"2e":"1B"}F{2.8.4.Q="1B"}2.k.4.Q=2.8.4.Q};7 19(a){a=a||{};a.Y=a.Y||"";a.X=a.X||E 6.5.2d(0,0);a.R=a.R||"2c";a.q=a.q||{};a.14=a.14||t;p(H a.1a==="P"){a.1a=u}2.1y=E m(2);6.5.18.1x(2,1w)}19.l=E 6.5.18();19.l.17=7(a){6.5.18.l.17.1x(2,1w);2.1y.17(a)};',62,143,'||this|marker_|style|maps|google|function|labelDiv_|event|||||||||||eventDiv_|prototype|MarkerLabel_|var|addListener|if|labelStyle|trigger|latLng|false|true|px|addDomListener|||get|zIndex|opacity|cssText|setZIndex|new|else|appendChild|typeof|position|overflow|cLngOffset|setStyles|top|setVisible|setPosition|undefined|display|labelClass|className|lng|lat|document|innerHTML|labelAnchor|labelContent|getPosition||listeners_|left|setAnchor|labelInBackground|setContent|setTitle|setMap|Marker|MarkerWithLabel|labelVisible|getZIndex|cursor|mouseover|dragstart|marginTop|hidden|marginLeft|drag|alpha|filter|setMandatoryStyles|absolute|dragend|mouseup|for|removeChild|parentNode|getPanes|stopPropagation|div|preventDefault|arguments|apply|label|mousedown|dblclick|none|click|mouseout|createElement|fromLatLngToDivPixel|getProjection|01|100|LatLng|hasOwnProperty|in|getDraggable|mousemove|getTitle|getMap|title|cloneNode|nodeType|draw|removeListener|length|onRemove|labelstyle_changed|onAdd|labelclass_changed|overlayMouseTarget|labelanchor_changed|OverlayView|labelcontent_changed|overlayImage|title_changed|labelvisible_changed|visible_changed|zindex_changed|position_changed|1000000|cancelBubble|markerLabels|Point|block|getVisible|getCursor|parseInt|pointer'.split('|'),0,{})) var map; var mapOptions = { center: new google.maps.LatLng(35, 105), zoom: 3, mapTypeId: google.maps.MapTypeId.ROADMAP }; var locations = [ ['Hong Kong', 22.39, 114.10, 1885], ['Shanghai', 31.232, 121.47, 5885], ['Beijing', 39.88, 116.40, 6426], ['Guangzhou', 23.129, 113.264, 4067], ['Shenzhen', 22.54, 114.05, 3089], ['Hangzhou', 30.27, 120.15, 954] ]; var infowindow = new google.maps.InfoWindow(); var i; /* for (i = 0; i < locations.length; i++) { marker = new google.maps.Marker({ position: new google.maps.LatLng(locations[i][1], locations[i][2]), map: map }); google.maps.event.addListener(marker, 'click', (function(marker, i) { return function() { infowindow.setContent(locations[i][0]); infowindow.open(map, marker); } })(marker, i)); } */ function myMarker(options) { if(!options.labelAnchor) { options.labelAnchor = new google.maps.Point(30, 50); } if(!options.labelClass) { options.labelClass = "labels"; } options.map = map; return new MarkerWithLabel(options); } function initialize() { map = new google.maps.Map(document.getElementById("map_canvas"), mapOptions); for (i = 0; i < locations.length; i++) { var marker = new MarkerWithLabel({ position: new google.maps.LatLng(locations[i][1], locations[i][2]), draggable: false, map: map, labelContent: locations[i][3], labelAnchor: new google.maps.Point(30, 0), labelClass: "labels", // the CSS class for the label labelStyle: {opacity: 0.75} }); } /* var marker2 = new myMarker({ position: new google.maps.LatLng(20,20), draggable: true, labelContent: "second" }); */ } google.maps.event.addDomListener(window, 'load', initialize); </script> </head> <body onload="initialize()"> <div id="map_canvas" style="width:85%; height:85%"></div> <script type="text/javascript"> </script> </body> </html> EDIT I have been trying to experiment with the MarkerManager, but I can't get the markers to create successfully on different zoom levels. First, I changed my default zoom level to 1, and then I changed my code to what is shown below. function initialize() { map = new google.maps.Map(document.getElementById("map_canvas"), mapOptions); /* for (i = 0; i < locations.length; i++) { var marker = new MarkerWithLabel({ position: new google.maps.LatLng(locations[i][1], locations[i][2]), draggable: false, map: map, labelContent: locations[i][3], labelAnchor: new google.maps.Point(30, 0), labelClass: "labels", // the CSS class for the label labelStyle: {opacity: 0.75} }); } */ var listener = google.maps.event.addListener(map, 'bounds_changed', function(){ setupMarkers(); google.maps.event.removeListener(listener); }); } function createCityMarkers() { for (i = 0; i < locations.length; i++) { var marker = new MarkerWithLabel({ position: new google.maps.LatLng(locations[i][1], locations[i][2]), draggable: false, map: map, labelContent: locations[i][3], labelAnchor: new google.maps.Point(30, 0), labelClass: "labels", // the CSS class for the label labelStyle: {opacity: 0.75} }); } } function setupMarkers() { mgr = new MarkerManager(map); google.maps.event.addListener(mgr, 'loaded', function(){ mgr.addMarkers(createCityMarkers(), 4); mgr.refresh(); }); } I have also tried applying the source code of this link as well, but nothing is working out. And when I copy the source code directly to my computer and replace all the icons with markers, the markers still don't appear. I can't seem to figure how to make markers appear using the marker Manager. http://google-maps-utility-library-v3.googlecode.com/svn/tags/markermanager/1.0/examples/weather_map.html

Read the article

trying to center a css menu made on purecssmenu.com

- by Party Mcfly

i have a menu that i generated on purecssmenu.com and im having trouble trying to center it on my page here is the code...  <style> #pcm{display:none;} ul.pureCssMenu ul{display:none} ul.pureCssMenu li:hover>ul{display:block} ul.pureCssMenu ul{position: absolute;left:-1px;top:98%;} ul.pureCssMenu ul ul{position: absolute;left:98%;top:-2px;} ul.pureCssMenu,ul.pureCssMenu ul { margin:0px; list-style:none; padding:0px 2px 2px 0px; background-color:#000000; background-repeat:repeat; border-color:#000000; border-width:1px; border-style:solid; } ul.pureCssMenu table {border-collapse:collapse}ul.pureCssMenu { display:block; zoom:1; float: left; } ul.pureCssMenu ul{ width:80.85000000000001px; } ul.pureCssMenu li{ display:block; margin:2px 0px 0px 2px; font-size:0px; } ul.pureCssMenu a:active, ul.pureCssMenu a:focus { outline-style:none; } ul.pureCssMenu a, ul.pureCssMenu li.dis a:hover, ul.pureCssMenu li.sep a:hover { display:block; vertical-align:middle; background-color:#000000; border-width:1px; border-color:#000000; border-style:solid; text-align:left; text-decoration:none; padding:2px 5px 2px 10px; _padding-left:0; font:11px Arial; color: #969696; text-decoration:none; cursor:default; } ul.pureCssMenu span{ overflow:hidden; } ul.pureCssMenu li { float:left; } ul.pureCssMenu ul li { float:none; } ul.pureCssMenu ul a { text-align:left; white-space:nowrap; } ul.pureCssMenu li.sep{ text-align:left; padding:0px; line-height:0; height:100%; } ul.pureCssMenu li.sep span{ float:none; padding-right:0; width:3px; height:100%; display:inline-block; background-color:#cccccc #111111 #111111 #cccccc; background-image:none;} ul.pureCssMenu ul li.sep span{ width:100%; height:3px; } ul.pureCssMenu li:hover{ position:relative; } ul.pureCssMenu li:hover>a{ background-color:#000000; border-color:#000000; border-style:solid; font:11px Arial; color: #ffa500; text-decoration:none; } ul.pureCssMenu li a:hover{ position:relative; background-color:#000000; border-color:#000000; border-style:solid; font:11px Arial; color: #ffa500; text-decoration:none; } ul.pureCssMenu li.dis a { color: #666 !important; } ul.pureCssMenu img {border: none;float:left;_float:none;margin-right:2px;width:16px; height:16px; } ul.pureCssMenu ul img {width:16px; height:16px; } ul.pureCssMenu img.over{display:none} ul.pureCssMenu li.dis a:hover img.over{display:none !important} ul.pureCssMenu li.dis a:hover img.def {display:inline !important} ul.pureCssMenu li:hover > a img.def {display:none} ul.pureCssMenu li:hover > a img.over {display:inline} ul.pureCssMenu a:hover img.over,ul.pureCssMenu a:hover ul img.def,ul.pureCssMenu a:hover a:hover img.over{display:inline} ul.pureCssMenu a:hover img.def,ul.pureCssMenu a:hover ul img.over,ul.pureCssMenu a:hover a:hover img.def{display:none} ul.pureCssMenu a:hover ul{display:block} ul.pureCssMenu span{ display:block; background-image:url(./images/arr_white.gif); background-position:right center; background-repeat: no-repeat; padding-right:12px;} ul.pureCssMenu li:hover>a>span{ background-image:url(./images/arrv_white.gif); } ul.pureCssMenu a:hover span{ _background-image:url(./images/arrv_white.gif)} ul.pureCssMenu ul span,ul.pureCssMenu a:hover table span{background-image:url(./images/arr_white.gif)} </style>  and here is the html, witch is probably not even needed in this posted but i figure i would include it.. i just want that menu centered inside my website.  <ul class="pureCssMenu pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="home.html" target="scare">home</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">about</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>haunts</span><![if gt IE 6]></a><![endif]> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2009</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2010</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2011</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2012</a></li> </ul> </li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">studio</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>products</span><![if gt IE 6]></a><![endif]> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">nightmares</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">hauntworks</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">atmosfears</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">frightwears</a></li> </ul> </li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>links</span><![if gt IE 6]></a><![endif]> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">haunts</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">suppliers</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">resources</a></li> </ul> </li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">contact</a></li> </ul> <a id="pcm" href="http://www.purecssmenu.com/">CSS Drop Down Menu by PureCSSMenu.com</a>  thanks in advance for your time.

Read the article

Intro Bar like stack overflow

- by Dasa

I have a simple top bar using jquery like the one on stackoverflow, but i want it to only appear on the first time a person visits the website. below is the HTML followed by the "bxSlider.js" file <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script> <script type="text/javascript" src="bxSlider.js"></script> <title>topbar</title> <style type="text/css" media="screen"> #message { font-family:Arial,Helvetica,sans-serif; position:fixed; top:0px; left:0px; width:100%; z-index:105; text-align:center; color:white; padding:2px 0px 2px 0px; background-color:#8E1609; } #example1 { text-align: center; width: 80%; } .close-notify { white-space: nowrap; float:right; margin-right:10px; color:#fff; text-decoration:none; padding-left:3px; padding-right:3px } .close-notify a { color: #fff; } h4, p { margin:0px; padding:0px; } </style> </head> <body> <DIV ID='message' style="display: none;"> <DIV ID="example1"> <DIV CLASS="item"> <h4>Head 1</h4> <p>Text 1</p> </div> <DIV CLASS="item"> <h4>Head 2</h4> <p>Text 2</p> </div> </div> <a href="#" CLASS="close-notify" onclick="closeNotice()">X</a> </div> <script type="text/javascript"> $(document).ready(function() { $("#message").fadeIn("slow"); $('#example1').bxSlider({ mode: 'slide', speed: 250, wrapper_CLASS: 'example1_container' }); }); function closeNotice() { $("#message").fadeOut("slow"); } </script> </body> </html> /** * * * bxSlider: Content slider / fade / ticker using the jQuery javascript library. * * Author: Steven Wanderski * Email: [email protected] * URL: http://bxslider.com * * **/ jQuery.fn.bxSlider = function(options){ ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Declare variables and functions ///////////////////////////////////////////////////////////////////////////////////////////////////////////// var defaults = { mode: 'slide', speed: 500, auto: false, auto_direction: 'left', pause: 2500, controls: true, prev_text: 'prev', next_text: 'next', width: $(this).children().width(), prev_img: '', next_img: '', ticker_direction: 'left', wrapper_class: 'container' }; options = $.extend(defaults, options); if(options.mode == 'ticker'){ options.auto = true; } var $this = $(this); var $parent_width = options.width; var current = 0; var is_working = false; var child_count = $this.children().size(); var i = 0; var j = 0; var k = 0; function animate_next(){ is_working = true; $this.animate({'left':'-' + $parent_width * 2 + 'px'}, options.speed, function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':first').appendTo($this); is_working = false; }); } function animate_prev(){ is_working = true; $this.animate({'left': 0}, options.speed, function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':last').insertBefore($this.children(':first')); is_working = false; }); } function fade(direction){ if(direction == 'next'){ var last_before_switch = child_count - 1; var start_over = 0; var incr = k + 1; }else if(direction == 'prev'){ var last_before_switch = 0; var start_over = child_count -1; var incr = k - 1; } is_working = true; if(k == last_before_switch){ $this.children().eq(k).fadeTo(options.speed, 0); $this.children().eq(start_over).fadeTo(options.speed, 1, function(){ is_working = false; k = start_over; }); }else{ $this.children().eq(k).fadeTo(options.speed, 0); $this.children().eq(incr).fadeTo(options.speed, 1, function(){ is_working = false; k = incr; }); } } function add_controls(){ ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Check if user selected images to use for next / prev ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(options.prev_img != '' || options.next_img != ''){ $this.parent().append('<a class="slider_prev" href=""><img src="' + options.prev_img + '" alt=""/></a><a class="slider_next" href=""><img src="' + options.next_img + '" alt="" /></a>'); }else{ $this.parent().append('<a class="slider_prev" href="">' + options.prev_text + '</a><a class="slider_next" href="">' + options.next_text + '</a>'); } $this.parent().find('.slider_prev').css({'float':'left', 'outline':'0', 'color':'yellow'}); $this.parent().find('.slider_next').css({'float':'right', 'outline':'0', 'color':'yellow'}); ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Accomodate padding-top for controls when elements are absolutely positioned (only in fade mode) ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(options.mode == 'fade'){ $this.parent().find('.slider_prev').css({'paddingTop' : $this.children().height()}) $this.parent().find('.slider_next').css({'paddingTop' : $this.children().height()}) } ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Actions when user clicks next / prev buttons ///////////////////////////////////////////////////////////////////////////////////////////////////////////// $this.parent().find('.slider_next').click(function(){ if(!is_working){ if(options.mode == 'slide'){ animate_next(); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){animate_next();}, options.pause); } }else if(options.mode == 'fade'){ fade('next'); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){fade('next');}, options.pause); } } } return false; }); $this.parent().find('.slider_prev').click(function(){ if(!is_working){ if(options.mode == 'slide'){ animate_prev(); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){animate_prev();}, options.pause); } }else if(options.mode == 'fade'){ fade('prev'); if(options.auto){ clearInterval($.t); $.t = setInterval(function(){fade('prev');}, options.pause); } } } return false; }); } function ticker() { if(options.ticker_direction == 'left'){ $this.animate({'left':'-' + $parent_width * 2 + 'px'}, options.speed, 'linear', function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':first').appendTo($this); ticker(); }); }else if(options.ticker_direction == 'right'){ $this.animate({'left': 0}, options.speed, 'linear', function(){ $this.css({'left':'-' + $parent_width + 'px'}).children(':last').insertBefore($this.children(':first')); ticker(); }); } } ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Create content wrapper and set CSS ///////////////////////////////////////////////////////////////////////////////////////////////////////////// $this.wrap('<div class="' + options.wrapper_class + '"></div>'); //console.log($this.parent().css('paddingTop')); if(options.mode == 'slide' || options.mode == 'ticker'){ $this.parent().css({ 'overflow' : 'hidden', 'position' : 'relative', 'margin' : '0 auto', 'width' : options.width + 'px' }); $this.css({ 'width' : '999999px', 'position' : 'relative', 'left' : '-' + $parent_width + 'px' }); $this.children().css({ 'float' : 'left', 'width' : $parent_width }); $this.children(':last').insertBefore($this.children(':first')); }else if(options.mode == 'fade'){ $this.parent().css({ 'overflow' : 'hidden', 'position' : 'relative', 'width' : options.width + 'px' //'height' : $this.children().height() }); if(!options.controls){ $this.parent().css({'height' : $this.children().height()}); } $this.children().css({ 'position' : 'absolute', 'width' : $parent_width, 'listStyle' : 'none', 'opacity' : 0 }); $this.children(':first').css({ 'opacity' : 1 }); } ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Check if user selected "auto" ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(!options.auto){ add_controls(); }else{ if(options.mode == 'ticker'){ ticker(); }else{ ///////////////////////////////////////////////////////////////////////////////////////////////////////////// // Set a timed interval ///////////////////////////////////////////////////////////////////////////////////////////////////////////// if(options.mode == 'slide'){ if(options.auto_direction == 'left'){ $.t = setInterval(function(){animate_next();}, options.pause); }else if(options.auto_direction == 'right'){ $.t = setInterval(function(){animate_prev();}, options.pause); } }else if(options.mode == 'fade'){ if(options.auto_direction == 'left'){ $.t = setInterval(function(){fade('next');}, options.pause); }else if(options.auto_direction == 'right'){ $.t = setInterval(function(){fade('prev');}, options.pause); } } if(options.controls){ add_controls(); } } } }

Read the article

HTML/jQuery/CSS Drop Down Menu Issue / Safari

- by mmundiff

I have a drop down menu that is coded in HTML, CSS, and jQuery and it works fine in Firefox and IE but not in Safari, and also not in Firefox on Mac. The drop down displays inline as opposed to list-item for the drop down in Safari. Any ideas why? <html> <head> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script> <script type="text/javascript" > $(document).ready(function(){ $('#menu li').hover( function() { //$('ul', this).css('display', 'block'); $('ul', this).fadeIn(200); var src = $('img.item', this).attr('src').match(/[^\.]+/) + '_over.png'; $('img.item', this).attr('src', src); }, function() { //$('ul', this).css('display', 'none'); $('ul', this).fadeOut(350); var src = $('img.item', this).attr('src').replace('_over', ''); $('img.item', this).attr('src', src); }); }); </script> <style type="text/css"> /* General */ body { arial, sans-serif; background-color: white; } * { padding: 0; margin: 0; } #menu{ white-space:nowrap; list-style:none; margin-left: 1px; } #menu ul { list-style: none; position:absolute; left:0; display:none; margin:0 -3px 0 -1px; padding:0; background: #000000; z-index: 500; margin-top: -4px; } #menu li{ display:inline; float: left; /* Added */ position:relative; } #menu li a { display: block; } #menu ul li { width:116px; float:left; border-top:1px dotted #666666; display: block; } #menu li ul { display: none; border-top: 1px black solid; text-align: left; } #menu ul a:hover { text-decoration:none; background: #efda83; color: #000000; } #menu ul a { text-decoration:none; display:block; height:15px; padding: 8px 5px; color:#efda83; font-size: 12px; } img{ border: 0 none; } .clear{ clear: both; } </style> </head> <body> <div> <ul id="menu"> <li ><a href="index.php"><img src="images/ssr_nav_home.png" class="item" alt="Home" /></a> </li> <li ><a href="about.php"><img src="images/ssr_nav_about.png" class="item" alt="About" /></a> <ul> <li><a href="about_contributors.php">Contributors</a></li> <li><a href="about_behind.php">Behind the Exhibit</a></li> <li><a href="about_sponsors.php">Sponsors</a></li> </ul> <div class="clear"></div> </li> <li ><a href="exhibit_intro.php"><img class="item" src="images/ssr_nav_exhibit.png" alt="Exhibit" /></a> <ul> <li><a href="exhibit_intro.php">Intro</a></li> <li><a href="exhibit_silkroad.php">Silk Road</a></li> <li><a href="exhibit_western_regions.php">Western Regions</a></li> <li><a href="exhibit_daily_life.php">Daily Life</a></li> <li><a href="exhibit_burial_practices.php">Burial Practices</a></li> <li><a href="exhibit_relevance.php">Relevance</a></li> </ul> <div class="clear"></div> </li> <li ><a href="visit.php"><img class="item" src="images/ssr_nav_visit.png" alt="Visit" /></a> <ul> <li><a href="visit_tickets.php">Tickets</a></li> <li><a href="visit_specials.php">Special Offers</a></li> <li><a href="visit_tours.php">Tours</a></li> <li><a href="visit_groups.php">Groups</a></li> </ul> <div class="clear"></div> </li> <li ><a href="events.php"><img class="item" src="images/ssr_nav_events.png" alt="Events" /></a> <ul> <li><a href="events_lectures.php">Lecture Series</a></li> <li><a href="events_symposium.php">Symposium</a></li> <li><a href="kids_and_family.php">Kids & Family</a></li> <li><a href="events_calendar.php">Event Calendar</a></li> </ul> <div class="clear"></div> </li> <li ><a href="gallery.php"><img class="item" src="images/ssr_nav_images.png" alt="Gallery" /></a></li> <li ><a href="resources.php"><img class="item" src="images/ssr_nav_resources.png" alt="Resources" /></a> <ul> <li><a href="resources_teachers.php">For Teachers</a></li> <li><a href="kids_and_family.php">Kids & Family</a></li> <li><a href="http://www.penn.museum/podcasts-and-videos/819-secrets-of-the-silk-road.html" rel="external">Podcasts & Videos</a></li>  <li><a href="resources_quiz.php">Quiz</a></li> <li><a href="glossary.php">Glossary</a></li> <li><a href="blogs.php">Blog</a></li> </ul> <div class="clear"></div> </li> <li ><a href="press.php"><img class="item" src="images/ssr_nav_press.png" alt="Press" /></a> <ul> <li><a href="press_release.php">Press Release</a></li> <li><a href="press_images.php">Press Images</a></li> <li><a href="press_bloggers.php">Bloggers</a></li> </ul> <div class="clear"></div> </li> </ul> </div> </body> </html>

Read the article

o write a C++ program to encrypt and decrypt certain codes.

- by Amber

Step 1: Write a function int GetText(char[],int); which fills a character array from a requested file. That is, the function should prompt the user to input the filename, and then read up to the number of characters given as the second argument, terminating when the number has been reached or when the end of file is encountered. The file should then be closed. The number of characters placed in the array is then returned as the value of the function. Every character in the file should be transferred to the array. Whitespace should not be removed. When testing, assume that no more than 5000 characters will be read. The function should be placed in a file called coding.cpp while the main will be in ass5.cpp. To enable the prototypes to be accessible, the file coding.h contains the prototypes for all the functions that are to be written in coding.cpp for this assignment. (You may write other functions. If they are called from any of the functions in coding.h, they must appear in coding.cpp where their prototypes should also appear. Do not alter coding.h. Any other functions written for this assignment should be placed, along with their prototypes, with the main function.) Step 2: Write a function int SimplifyText(char[],int); which simplifies the text in the first argument, an array containing the number of characters as given in the second argument, by converting all alphabetic characters to lower case, removing all non-alpha characters, and replacing multiple whitespace by one blank. Any leading whitespace at the beginning of the array should be removed completely. The resulting number of characters should be returned as the value of the function. Note that another array cannot appear in the function (as the file does not contain one). For example, if the array contained the 29 characters "The 39 Steps" by John Buchan (with the " appearing in the array), the simplified text would be the steps by john buchan of length 24. The array should not contain a null character at the end. Step 3: Using the file test.txt, test your program so far. You will need to write a function void PrintText(const char[],int,int); that prints out the contents of the array, whose length is the second argument, breaking the lines to exactly the number of characters in the third argument. Be warned that, if the array contains newlines (as it would when read from a file), lines will be broken earlier than the specified length. Step 4: Write a function void Caesar(const char[],int,char[],int); which takes the first argument array, with length given by the second argument and codes it into the third argument array, using the shift given in the fourth argument. The shift must be performed cyclicly and must also be able to handle negative shifts. Shifts exceeding 26 can be reduced by modulo arithmetic. (Is C++'s modulo operations on negative numbers a problem here?) Demonstrate that the test file, as simplified, can be coded and decoded using a given shift by listing the original input text, the simplified text (indicating the new length), the coded text and finally the decoded text. Step 5: The permutation cypher does not limit the character substitution to just a shift. In fact, each of the 26 characters is coded to one of the others in an arbitrary way. So, for example, a might become f, b become q, c become d, but a letter never remains the same. How the letters are rearranged can be specified using a seed to the random number generator. The code can then be decoded, if the decoder has the same random number generator and knows the seed. Write the function void Permute(const char[],int,char[],unsigned long); with the same first three arguments as Caesar above, with the fourth argument being the seed. The function will have to make up a permutation table as follows: To find what a is coded as, generate a random number from 1 to 25. Add that to a to get the coded letter. Mark that letter as used. For b, generate 1 to 24, then step that many letters after b, ignoring the used letter if encountered. For c, generate 1 to 23, ignoring a or b's codes if encountered. Wrap around at z. Here's an example, for only the 6 letters a, b, c, d, e, f. For the letter a, generate, from 1-5, a 2. Then a - c. c is marked as used. For the letter b, generate, from 1-4, a 3. So count 3 from b, skipping c (since it is marked as used) yielding the coding of b - f. Mark f as used. For c, generate, from 1-3, a 3. So count 3 from c, skipping f, giving a. Note the wrap at the last letter back to the first. And so on, yielding a - c b - f c - a d - b (it got a 2) e - d f - e Thus, for a given seed, a translation table is required. To decode a piece of text, we need the table generated to be re-arranged so that the right hand column is in order. In fact you can just store the table in the reverse way (e.g., if a gets encoded to c, put a opposite c is the table). Write a function called void DePermute(const char[],int,char[], unsigned long); to reverse the permutation cypher. Again, test your functions using the test file. At this point, any main program used to test these functions will not be required as part of the assignment. The remainder of the assignment uses some of these functions, and needs its own main function. When submitted, all the above functions will be tested by the marker's own main function. Step 6: If the seed number is unknown, decoding is difficult. Write a main program which: (i) reads in a piece of text using GetText; (ii) simplifies the text using SimplifyText; (iii) prints the text using PrintText; (iv) requests two letters to swap. If we think 'a' in the text should be 'q' we would type aq as input. The text would be modified by swapping the a's and q's, and the text reprinted. Repeat this last step until the user considers the text is decoded, when the input of the same letter twice (requesting a letter to be swapped with itself) terminates the program. Step 7: If we have a large enough sample of coded text, we can use knowledge of English to aid in finding the permutation. The first clue is in the frequency of occurrence of each letter. Write a function void LetterFreq(const char[],int,freq[]); which takes the piece of text given as the first two arguments (same as above) and returns in the 26 long array of structs (the third argument), the table of the frequency of the 26 letters. This frequency table should be in decreasing order of popularity. A simple Selection Sort will suffice. (This will be described in lectures.) When printed, this summary would look something like v x r s z j p t n c l h u o i b w d g e a q y k f m 168106 68 66 59 54 48 45 44 35 26 24 22 20 20 20 17 13 12 12 4 4 1 0 0 0 The formatting will require the use of input/output manipulators. See the header file for the definition of the struct called freq. Modify the program so that, before each swap is requested, the current frequency of the letters is printed. This does not require further calls to LetterFreq, however. You may use the traditional order of regular letter frequencies (E T A I O N S H R D L U) as a guide when deciding what characters to exchange. Step 8: The decoding process can be made more difficult if blank is also coded. That is, consider the alphabet to be 27 letters. Rewrite LetterFreq and your main program to handle blank as another character to code. In the above frequency order, space usually comes first.

Read the article

Write a C++ program to encrypt and decrypt certain codes.

- by Amber

Step 1: Write a function int GetText(char[],int); which fills a character array from a requested file. That is, the function should prompt the user to input the filename, and then read up to the number of characters given as the second argument, terminating when the number has been reached or when the end of file is encountered. The file should then be closed. The number of characters placed in the array is then returned as the value of the function. Every character in the file should be transferred to the array. Whitespace should not be removed. When testing, assume that no more than 5000 characters will be read. The function should be placed in a file called coding.cpp while the main will be in ass5.cpp. To enable the prototypes to be accessible, the file coding.h contains the prototypes for all the functions that are to be written in coding.cpp for this assignment. (You may write other functions. If they are called from any of the functions in coding.h, they must appear in coding.cpp where their prototypes should also appear. Do not alter coding.h. Any other functions written for this assignment should be placed, along with their prototypes, with the main function.) Step 2: Write a function int SimplifyText(char[],int); which simplifies the text in the first argument, an array containing the number of characters as given in the second argument, by converting all alphabetic characters to lower case, removing all non-alpha characters, and replacing multiple whitespace by one blank. Any leading whitespace at the beginning of the array should be removed completely. The resulting number of characters should be returned as the value of the function. Note that another array cannot appear in the function (as the file does not contain one). For example, if the array contained the 29 characters "The 39 Steps" by John Buchan (with the " appearing in the array), the simplified text would be the steps by john buchan of length 24. The array should not contain a null character at the end. Step 3: Using the file test.txt, test your program so far. You will need to write a function void PrintText(const char[],int,int); that prints out the contents of the array, whose length is the second argument, breaking the lines to exactly the number of characters in the third argument. Be warned that, if the array contains newlines (as it would when read from a file), lines will be broken earlier than the specified length. Step 4: Write a function void Caesar(const char[],int,char[],int); which takes the first argument array, with length given by the second argument and codes it into the third argument array, using the shift given in the fourth argument. The shift must be performed cyclicly and must also be able to handle negative shifts. Shifts exceeding 26 can be reduced by modulo arithmetic. (Is C++'s modulo operations on negative numbers a problem here?) Demonstrate that the test file, as simplified, can be coded and decoded using a given shift by listing the original input text, the simplified text (indicating the new length), the coded text and finally the decoded text. Step 5: The permutation cypher does not limit the character substitution to just a shift. In fact, each of the 26 characters is coded to one of the others in an arbitrary way. So, for example, a might become f, b become q, c become d, but a letter never remains the same. How the letters are rearranged can be specified using a seed to the random number generator. The code can then be decoded, if the decoder has the same random number generator and knows the seed. Write the function void Permute(const char[],int,char[],unsigned long); with the same first three arguments as Caesar above, with the fourth argument being the seed. The function will have to make up a permutation table as follows: To find what a is coded as, generate a random number from 1 to 25. Add that to a to get the coded letter. Mark that letter as used. For b, generate 1 to 24, then step that many letters after b, ignoring the used letter if encountered. For c, generate 1 to 23, ignoring a or b's codes if encountered. Wrap around at z. Here's an example, for only the 6 letters a, b, c, d, e, f. For the letter a, generate, from 1-5, a 2. Then a - c. c is marked as used. For the letter b, generate, from 1-4, a 3. So count 3 from b, skipping c (since it is marked as used) yielding the coding of b - f. Mark f as used. For c, generate, from 1-3, a 3. So count 3 from c, skipping f, giving a. Note the wrap at the last letter back to the first. And so on, yielding a - c b - f c - a d - b (it got a 2) e - d f - e Thus, for a given seed, a translation table is required. To decode a piece of text, we need the table generated to be re-arranged so that the right hand column is in order. In fact you can just store the table in the reverse way (e.g., if a gets encoded to c, put a opposite c is the table). Write a function called void DePermute(const char[],int,char[], unsigned long); to reverse the permutation cypher. Again, test your functions using the test file. At this point, any main program used to test these functions will not be required as part of the assignment. The remainder of the assignment uses some of these functions, and needs its own main function. When submitted, all the above functions will be tested by the marker's own main function. Step 6: If the seed number is unknown, decoding is difficult. Write a main program which: (i) reads in a piece of text using GetText; (ii) simplifies the text using SimplifyText; (iii) prints the text using PrintText; (iv) requests two letters to swap. If we think 'a' in the text should be 'q' we would type aq as input. The text would be modified by swapping the a's and q's, and the text reprinted. Repeat this last step until the user considers the text is decoded, when the input of the same letter twice (requesting a letter to be swapped with itself) terminates the program. Step 7: If we have a large enough sample of coded text, we can use knowledge of English to aid in finding the permutation. The first clue is in the frequency of occurrence of each letter. Write a function void LetterFreq(const char[],int,freq[]); which takes the piece of text given as the first two arguments (same as above) and returns in the 26 long array of structs (the third argument), the table of the frequency of the 26 letters. This frequency table should be in decreasing order of popularity. A simple Selection Sort will suffice. (This will be described in lectures.) When printed, this summary would look something like v x r s z j p t n c l h u o i b w d g e a q y k f m 168106 68 66 59 54 48 45 44 35 26 24 22 20 20 20 17 13 12 12 4 4 1 0 0 0 The formatting will require the use of input/output manipulators. See the header file for the definition of the struct called freq. Modify the program so that, before each swap is requested, the current frequency of the letters is printed. This does not require further calls to LetterFreq, however. You may use the traditional order of regular letter frequencies (E T A I O N S H R D L U) as a guide when deciding what characters to exchange. Step 8: The decoding process can be made more difficult if blank is also coded. That is, consider the alphabet to be 27 letters. Rewrite LetterFreq and your main program to handle blank as another character to code. In the above frequency order, space usually comes first.

Read the article

MySQL Config File for Large System

- by Jonathon

We are running MySQL on a Windows 2003 Server Enterpise Edition box. MySQL is about the only program running on the box. We have approx. 8 slaves replicated to it, but my understanding is that having multiple slaves connecting to the same master does not significantly slow down performance, if at all. The master server has 16G RAM, 10 Terabyte drives in RAID 10, and four dual-core processors. From what I have seen from other sites, we have a really robust machine as our master db server. We just upgraded from a machine with only 4G RAM, but with similar hard drives, RAID, etc. It also ran Apache on it, so it was our db server and our application server. It was getting a little slow, so we split the db server onto this new machine and kept the application server on the first machine. We also distributed the application load amongst a few of our other slave servers, which also run the application. The problem is the new db server has mysqld.exe consuming 95-100% of CPU almost all the time and is really causing the app to run slowly. I know we have several queries and table structures that could be better optimized, but since they worked okay on the older, smaller server, I assume that our my.ini (MySQL config) file is not properly configured. Most of what I see on the net is for setting config files on small machines, so can anyone help me get the my.ini file correct for a large dedicated machine like ours? I just don't see how mysqld could get so bogged down! FYI: We have about 100 queries per second. We only use MyISAM tables, so skip-innodb is set in the ini file. And yes, I know it is reading the ini file correctly because I can change some settings (like the server-id and it will kill the server at startup). Here is the my.ini file: #MySQL Server Instance Configuration File # ---------------------------------------------------------------------- # Generated by the MySQL Server Instance Configuration Wizard # # # Installation Instructions # ---------------------------------------------------------------------- # # On Linux you can copy this file to /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options # (@localstatedir@ for this installation) or to # ~/.my.cnf to set user-specific options. # # On Windows you should keep this file in the installation directory # of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To # make sure the server reads the config file use the startup option # "--defaults-file". # # To run run the server from the command line, execute this in a # command line shell, e.g. # mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" # # To install the server as a Windows service manually, execute this in a # command line shell, e.g. # mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" # # And then execute this in a command line shell to start the server, e.g. # net start MySQLXY # # # Guildlines for editing this file # ---------------------------------------------------------------------- # # In this file, you can use all long options that the program supports. # If you want to know the options a program supports, start the program # with the "--help" option. # # More detailed information about the individual options can also be # found in the manual. # # # CLIENT SECTION # ---------------------------------------------------------------------- # # The following options will be read by MySQL client applications. # Note that only client applications shipped by MySQL are guaranteed # to read this section. If you want your own MySQL client program to # honor these values, you need to specify it as an option during the # MySQL client library initialization. # [client] port=3306 [mysql] default-character-set=latin1 # SERVER SECTION # ---------------------------------------------------------------------- # # The following options will be read by the MySQL Server. Make sure that # you have installed the server correctly (see above) so it reads this # file. # [mysqld] # The TCP/IP Port the MySQL Server will listen on port=3306 #Path to installation directory. All paths are usually resolved relative to this. basedir="D:/MySQL/" #Path to the database root datadir="D:/MySQL/data" # The default character set that will be used when a new schema or table is # created and no character set is defined default-character-set=latin1 # The default storage engine that will be used when create new tables when default-storage-engine=MYISAM # Set the SQL mode to strict #sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION" # we changed this because there are a couple of queries that can get blocked otherwise sql-mode="" #performance configs skip-locking max_allowed_packet = 1M table_open_cache = 512 # The maximum amount of concurrent sessions the MySQL server will # allow. One of these connections will be reserved for a user with # SUPER privileges to allow the administrator to login even if the # connection limit has been reached. max_connections=1510 # Query cache is used to cache SELECT results and later return them # without actual executing the same query once again. Having the query # cache enabled may result in significant speed improvements, if your # have a lot of identical queries and rarely changing tables. See the # "Qcache_lowmem_prunes" status variable to check if the current value # is high enough for your load. # Note: In case your tables change very often or if your queries are # textually different every time, the query cache may result in a # slowdown instead of a performance improvement. query_cache_size=168M # The number of open tables for all threads. Increasing this value # increases the number of file descriptors that mysqld requires. # Therefore you have to make sure to set the amount of open files # allowed to at least 4096 in the variable "open-files-limit" in # section [mysqld_safe] table_cache=3020 # Maximum size for internal (in-memory) temporary tables. If a table # grows larger than this value, it is automatically converted to disk # based table This limitation is for a single table. There can be many # of them. tmp_table_size=30M # How many threads we should keep in a cache for reuse. When a client # disconnects, the client's threads are put in the cache if there aren't # more than thread_cache_size threads from before. This greatly reduces # the amount of thread creations needed if you have a lot of new # connections. (Normally this doesn't give a notable performance # improvement if you have a good thread implementation.) thread_cache_size=64 #*** MyISAM Specific options # The maximum size of the temporary file MySQL is allowed to use while # recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE. # If the file-size would be bigger than this, the index will be created # through the key cache (which is slower). myisam_max_sort_file_size=100G # If the temporary file used for fast index creation would be bigger # than using the key cache by the amount specified here, then prefer the # key cache method. This is mainly used to force long character keys in # large tables to use the slower key cache method to create the index. myisam_sort_buffer_size=64M # Size of the Key Buffer, used to cache index blocks for MyISAM tables. # Do not set it larger than 30% of your available memory, as some memory # is also required by the OS to cache rows. Even if you're not using # MyISAM tables, you should still set it to 8-64M as it will also be # used for internal temporary disk tables. key_buffer_size=3072M # Size of the buffer used for doing full table scans of MyISAM tables. # Allocated per thread, if a full scan is needed. read_buffer_size=2M read_rnd_buffer_size=8M # This buffer is allocated when MySQL needs to rebuild the index in # REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE # into an empty table. It is allocated per thread so be careful with # large settings. sort_buffer_size=2M #*** INNODB Specific options *** innodb_data_home_dir="D:/MySQL InnoDB Datafiles/" # Use this option if you have a MySQL server with InnoDB support enabled # but you do not plan to use it. This will save memory and disk space # and speed up some things. skip-innodb # Additional memory pool that is used by InnoDB to store metadata # information. If InnoDB requires more memory for this purpose it will # start to allocate it from the OS. As this is fast enough on most # recent operating systems, you normally do not need to change this # value. SHOW INNODB STATUS will display the current amount used. innodb_additional_mem_pool_size=11M # If set to 1, InnoDB will flush (fsync) the transaction logs to the # disk at each commit, which offers full ACID behavior. If you are # willing to compromise this safety, and you are running small # transactions, you may set this to 0 or 2 to reduce disk I/O to the # logs. Value 0 means that the log is only written to the log file and # the log file flushed to disk approximately once per second. Value 2 # means the log is written to the log file at each commit, but the log # file is only flushed to disk approximately once per second. innodb_flush_log_at_trx_commit=1 # The size of the buffer InnoDB uses for buffering log data. As soon as # it is full, InnoDB will have to flush it to disk. As it is flushed # once per second anyway, it does not make sense to have it very large # (even with long transactions). innodb_log_buffer_size=6M # InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and # row data. The bigger you set this the less disk I/O is needed to # access data in tables. On a dedicated database server you may set this # parameter up to 80% of the machine physical memory size. Do not set it # too large, though, because competition of the physical memory may # cause paging in the operating system. Note that on 32bit systems you # might be limited to 2-3.5G of user level memory per process, so do not # set it too high. innodb_buffer_pool_size=500M # Size of each log file in a log group. You should set the combined size # of log files to about 25%-100% of your buffer pool size to avoid # unneeded buffer pool flush activity on log file overwrite. However, # note that a larger logfile size will increase the time needed for the # recovery process. innodb_log_file_size=100M # Number of threads allowed inside the InnoDB kernel. The optimal value # depends highly on the application, hardware as well as the OS # scheduler properties. A too high value may lead to thread thrashing. innodb_thread_concurrency=10 #replication settings (this is the master) log-bin=log server-id = 1 Thanks for all the help. It is greatly appreciated.

Read the article

drop down menu will not display outside containing div in IE7..

- by playahabana

I am tearing my hair out over this, I have a dropdown menu using CSS and jQuery (thanks to Soh Tanaka) and it works perfectly in Firefox, Safari, Google chrome and I.E. 8, but in IE 7 it will not drop down outside the 'Banner div'. It drops below the nav div however. I have moved the nav div higher in the banner the result is the same, menu drops until it reaches the border of the banner div and then vanishes.... Below is the css. This is my first website and I have some limited understanding of what I am doing. The drop down menu includes transparent png's as links (I know, I know...but it's what the Boss wants...) please could someone take a quick scan at the below CSS and let me know what is wroong? Is this some form of the IE z-index bug? i have tried all different combinations of z-index and still I can't get a different result. . The html is below as well. Thankyou in advance #banner { position: relative; width: 62.5em; height: 12em; background-color: #46280A; background-image: url('images/includes/banner2.jpg'); background-repeat: no-repeat; background-position: center; -moz-box-shadow: -4px 6px 8px #000; -webkit-box-shadow: -4px 6px 8px #000; box-shadow: -4px 6px 8px #000; /* For IE 8 */ -ms-filter: "progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000')"; /* For IE 5.5 - 7 */ filter: progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000'); z-index: 1; } /*------------------------------------SCROLLER---------------------------------------------*/ #headlines{ position: absolute; top: 1.3em; right: 2.75em; overflow: hidden; height: 2.5em; width: 24em; background-color: #000000; display: block; z-index: 3; } #news{ position: relative; height: 3.1em; line-height: 2.5em; font-size: 0.8em color: #FFFF99; white-space: nowrap; overflow: hidden; font-family: Georgia,Arial; } #scrollerglass{ position: absolute; top: 0.95em; right: 2em; height: 52px; width: 410px; border: none; padding: 0.2em 0em 0em 0em; line-height: 0.7em; text-align: center; background-image: url('images/includes/scrollerglass.png'); background-color: transparent; background-repeat: no-repeat; background-position: center; opacity: 20; z-index: 10; } #scrollerglass a i { visibility: hiddn ; } /-------------------------------------NAVIGATION-----------------------------------------/ #nav { position: absolute; top: 5.8em; left: 0.2em; font-family: trebuchet, sans-serif; font-size: 1em; line-height: 3.75em; text-align: center; color: #FFFF00; z-index: 3; } ul.navlist { list-style: none; padding: 0em; margin: 1em; float: left; width: 62.5em; background: transparent; font-size: 1em; } ul.navlist li { position: relative; /*--Declare X and Y axis base for sub navigation--*/ float: left; margin: 0em 1.4em; padding: 0em 0.7em 0em 0em; z-index: 1; } ul.navlist li a{ display: block; text-decoration: none; float: left; border: 0px solid; } ul.navlist li img{ border: 0px solid; } ul.navlist li span { trigger styles--*/ width: 1.2em; height: 5.25em; float: left; background: url(images/links/downlogo.png) no-repeat center top; } ul.navlist li span.subhover { background-position: center bottom; cursor: pointer; } ul.navlist li ul.navdrop { list-style: none; position: absolute; float: left; top: 5.3em; left: -2.4em; height: 15.0em; width: 11.25em; margin: 0; padding: 0.5em 0em 0em 0em; display: none; background-position: center; background-image: url('images/includes/slider.jpg'); background-color: transparent; background-repeat: no-repeat; -moz-box-shadow: -4px 6px 8px #000; -webkit-box-shadow: -4px 6px 8px #000; box-shadow: -4px 6px 8px #000; /* For IE 8 */ -ms-filter: "progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000')"; /* For IE 5.5 - 7 */ filter: progid:DXImageTransform.Microsoft.Shadow(Strength=8, Direction=225, Color='#000000'); z-index:1; } ul.navlist li ul.navdrop li{ margin: 0em 2.3em 0em 0em; padding: 1em 0em 0em 0em; width: 8em; clear: both; } html ul.navlist li ul.navdrop li a { border: 0px solid; width: 11.25em; } html ul.navlist li ul.navdrop li a:hover { background: transparent; } <div id="banner"> <div id="headlines"> <div id="news"> Whatever we want to promote </div> </div> <div id="scrollerglass"> <a href="vintagecigars.php"> <i>------s-c-r-o-l-l-e-r - - - -l-i-n-k-s--------<br /> <br>------s-c-r-o-l-l-e-r - - - -l-i-n-k-s------</i></a> </div> <div id="nav"> <ul class="navmenu"> <li><a href="index.php"><img src="images/links/home.png" alt="Home" ></a></li> <li><a href="ourbar.php"><img src="images/links/ourbar.png" alt="Our Bar" ></a> <ul class="navdrop"> <li ><a href="ourcocktails.php"><img src="images/links/cockteles.png" alt="Our Cocktails" ></a></li> <li ><a href="celebrate.php"><img src="images/links/celebrate.png" alt="Celebrate in Style" ></a></li> </ul> </li> <li><a href="ourcigars.php"><img src="images/links/ourcigars.png" alt="Our Cigars" ></a> <ul class="navdrop"> <li ><a href="edicioneslimitadas.php"><img src="images/links/edicioneslimitadas.png" alt="Edition Limitadas" ></a></li> <li ><a href="cigartasting.php"><img src="images/links/cigartasting.png" alt="Cigar Tastings" ></a></li> </ul> </li> <li><a href="personalroller.php"><img src="images/links/personalcigar.png" alt="Personal Cigar Roller" ></a></li> <li><a href="galleryentrance.php"><img src="images/links/photogallery.png" alt="Photo Gallery" ></a></li> <li><a href="contactus.php"><img src="images/links/contactus.png" alt="Contact Us" ></a></li> </ul></div></div>

Read the article

An Introduction to jQuery Templates

- by Stephen Walther

The goal of this blog entry is to provide you with enough information to start working with jQuery Templates. jQuery Templates enable you to display and manipulate data in the browser. For example, you can use jQuery Templates to format and display a set of database records that you have retrieved with an Ajax call. jQuery Templates supports a number of powerful features such as template tags, template composition, and wrapped templates. I’ll concentrate on the features that I think that you will find most useful. In order to focus on the jQuery Templates feature itself, this blog entry is server technology agnostic. All the samples use HTML pages instead of ASP.NET pages. In a future blog entry, I’ll focus on using jQuery Templates with ASP.NET Web Forms and ASP.NET MVC (You can do some pretty powerful things when jQuery Templates are used on the client and ASP.NET is used on the server). Introduction to jQuery Templates The jQuery Templates plugin was developed by the Microsoft ASP.NET team in collaboration with the open-source jQuery team. While working at Microsoft, I wrote the original proposal for jQuery Templates, Dave Reed wrote the original code, and Boris Moore wrote the final code. The jQuery team – especially John Resig – was very involved in each step of the process. Both the jQuery community and ASP.NET communities were very active in providing feedback. jQuery Templates will be included in the jQuery core library (the jQuery.js library) when jQuery 1.5 is released. Until jQuery 1.5 is released, you can download the jQuery Templates plugin from the jQuery Source Code Repository or you can use jQuery Templates directly from the ASP.NET CDN. The documentation for jQuery Templates is already included with the official jQuery documentation at http://api.jQuery.com. The main entry for jQuery templates is located under the topic plugins/templates. A Basic Sample of jQuery Templates Let’s start with a really simple sample of using jQuery Templates. We’ll use the plugin to display a list of books stored in a JavaScript array. Here’s the complete code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head> <title>Intro</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg" }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg" }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg" }, ]; // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> When you open this page in a browser, a list of books is displayed: There are several things going on in this page which require explanation. First, notice that the page uses both the jQuery 1.4.4 and jQuery Templates libraries. Both libraries are retrieved from the ASP.NET CDN: <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> You can use the ASP.NET CDN for free (even for production websites). You can learn more about the files included on the ASP.NET CDN by visiting the ASP.NET CDN documentation page. Second, you should notice that the actual template is included in a script tag with a special MIME type: <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> This template is displayed for each of the books rendered by the template. The template displays a book picture, title, and price. Notice that the SCRIPT tag which wraps the template has a MIME type of text/x-jQuery-tmpl. Why is the template wrapped in a SCRIPT tag and why the strange MIME type? When a browser encounters a SCRIPT tag with an unknown MIME type, it ignores the content of the tag. This is the behavior that you want with a template. You don’t want a browser to attempt to parse the contents of a template because this might cause side effects. For example, the template above includes an <img> tag with a src attribute that points at “BookPictures/${picture}”. You don’t want the browser to attempt to load an image at the URL “BookPictures/${picture}”. Instead, you want to prevent the browser from processing the IMG tag until the ${picture} expression is replaced by with the actual name of an image by the jQuery Templates plugin. If you are not worried about browser side-effects then you can wrap a template inside any HTML tag that you please. For example, the following DIV tag would also work with the jQuery Templates plugin: <div id="bookTemplate" style="display:none"> <div> <h2>${title}</h2> price: ${formatPrice(price)} </div> </div> Notice that the DIV tag includes a style=”display:none” attribute to prevent the template from being displayed until the template is parsed by the jQuery Templates plugin. Third, notice that the expression ${…} is used to display the value of a JavaScript expression within a template. For example, the expression ${title} is used to display the value of the book title property. You can use any JavaScript function that you please within the ${…} expression. For example, in the template above, the book price is formatted with the help of the custom JavaScript formatPrice() function which is defined lower in the page. Fourth, and finally, the template is rendered with the help of the tmpl() method. The following statement selects the bookTemplate and renders an array of books using the bookTemplate. The results are appended to a DIV element named bookContainer by using the standard jQuery appendTo() method. $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); Using Template Tags Within a template, you can use any of the following template tags. {{tmpl}} – Used for template composition. See the section below. {{wrap}} – Used for wrapped templates. See the section below. {{each}} – Used to iterate through a collection. {{if}} – Used to conditionally display template content. {{else}} – Used with {{if}} to conditionally display template content. {{html}} – Used to display the value of an HTML expression without encoding the value. Using ${…} or {{= }} performs HTML encoding automatically. {{= }}-- Used in exactly the same way as ${…}. {{! }} – Used for displaying comments. The contents of a {{!...}} tag are ignored. For example, imagine that you want to display a list of blog entries. Each blog entry could, possibly, have an associated list of categories. The following page illustrates how you can use the { if}} and {{each}} template tags to conditionally display categories for each blog entry: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>each</title> <link href="1_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="blogPostContainer"></div> <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> var blogPosts = [ { postTitle: "How to fix a sink plunger in 5 minutes", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna.", categories: ["HowTo", "Sinks", "Plumbing"] }, { postTitle: "How to remove a broken lightbulb", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna.", categories: ["HowTo", "Lightbulbs", "Electricity"] }, { postTitle: "New associate website", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna." } ]; // Render the blog posts $("#blogPostTemplate").tmpl(blogPosts).appendTo("#blogPostContainer"); </script> </body> </html> When this page is opened in a web browser, the following list of blog posts and categories is displayed: Notice that the first and second blog entries have associated categories but the third blog entry does not. The third blog entry is “Uncategorized”. The template used to render the blog entries and categories looks like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> Notice the special expression $value used within the {{each}} template tag. You can use $value to display the value of the current template item. In this case, $value is used to display the value of each category in the collection of categories. Template Composition When building a fancy page, you might want to build a template out of multiple templates. In other words, you might want to take advantage of template composition. For example, imagine that you want to display a list of products. Some of the products are being sold at their normal price and some of the products are on sale. In that case, you might want to use two different templates for displaying a product: a productTemplate and a productOnSaleTemplate. The following page illustrates how you can use the {{tmpl}} tag to build a template from multiple templates: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Composition</title> <link href="2_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContainer"> <h1>Products</h1> <div id="productListContainer"></div>  <script id="productListTemplate" type="text/x-jQuery-tmpl"> <div> {{if onSale}} {{tmpl "#productOnSaleTemplate"}} {{else}} {{tmpl "#productTemplate"}} {{/if}} </div> </script>  <script id="productTemplate" type="text/x-jQuery-tmpl"> ${name} </script>  <script id="productOnSaleTemplate" type="text/x-jQuery-tmpl"> <b>${name}</b> <img src="images/on_sale.png" alt="On Sale" /> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> var products = [ { name: "Laptop", onSale: false }, { name: "Apples", onSale: true }, { name: "Comb", onSale: false } ]; $("#productListTemplate").tmpl(products).appendTo("#productListContainer"); </script> </div> </body> </html> In the page above, the main template used to display the list of products looks like this: <script id="productListTemplate" type="text/x-jQuery-tmpl"> <div> {{if onSale}} {{tmpl "#productOnSaleTemplate"}} {{else}} {{tmpl "#productTemplate"}} {{/if}} </div> </script> If a product is on sale then the product is displayed with the productOnSaleTemplate (which includes an on sale image): <script id="productOnSaleTemplate" type="text/x-jQuery-tmpl"> <b>${name}</b> <img src="images/on_sale.png" alt="On Sale" /> </script> Otherwise, the product is displayed with the normal productTemplate (which does not include the on sale image): <script id="productTemplate" type="text/x-jQuery-tmpl"> ${name} </script> You can pass a parameter to the {{tmpl}} tag. The parameter becomes the data passed to the template rendered by the {{tmpl}} tag. For example, in the previous section, we used the {{each}} template tag to display a list of categories for each blog entry like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> Another way to create this template is to use template composition like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{tmpl(categories) "#categoryTemplate"}} {{else}} Uncategorized {{/if}} </script> <script id="categoryTemplate" type="text/x-jQuery-tmpl"> <i>${$data}</i>   </script> Using the {{each}} tag or {{tmpl}} tag is largely a matter of personal preference. Wrapped Templates The {{wrap}} template tag enables you to take a chunk of HTML and transform the HTML into another chunk of HTML (think easy XSLT). When you use the {{wrap}} tag, you work with two templates. The first template contains the HTML being transformed and the second template includes the filter expressions for transforming the HTML. For example, you can use the {{wrap}} template tag to transform a chunk of HTML into an interactive tab strip: When you click any of the tabs, you see the corresponding content. This tab strip was created with the following page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Wrapped Templates</title> <style type="text/css"> body { font-family: Arial; background-color:black; } .tabs div { display:inline-block; border-bottom: 1px solid black; padding:4px; background-color:gray; cursor:pointer; } .tabs div.tabState_true { background-color:white; border-bottom:1px solid white; } .tabBody { border-top:1px solid white; padding:10px; background-color:white; min-height:400px; width:400px; } </style> </head> <body> <div id="tabsView"></div> <script id="tabsContent" type="text/x-jquery-tmpl"> {{wrap "#tabsWrap"}} <h3>Tab 1</h3> <div> Content of tab 1. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 2</h3> <div> Content of tab 2. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 3</h3> <div> Content of tab 3. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> {{/wrap}} </script> <script id="tabsWrap" type="text/x-jquery-tmpl"> <div class="tabs"> {{each $item.html("h3", true)}} <div class="tabState_${$index === selectedTabIndex}"> ${$value} </div> {{/each}} </div> <div class="tabBody"> {{html $item.html("div")[selectedTabIndex]}} </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Global for tracking selected tab var selectedTabIndex = 0; // Render the tab strip $("#tabsContent").tmpl().appendTo("#tabsView"); // When a tab is clicked, update the tab strip $("#tabsView") .delegate(".tabState_false", "click", function () { var templateItem = $.tmplItem(this); selectedTabIndex = $(this).index(); templateItem.update(); }); </script> </body> </html> The “source” for the tab strip is contained in the following template: <script id="tabsContent" type="text/x-jquery-tmpl"> {{wrap "#tabsWrap"}} <h3>Tab 1</h3> <div> Content of tab 1. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 2</h3> <div> Content of tab 2. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 3</h3> <div> Content of tab 3. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> {{/wrap}} </script> The tab strip is created with a list of H3 elements (which represent each tab) and DIV elements (which represent the body of each tab). Notice that the HTML content is wrapped in the {{wrap}} template tag. This template tag points at the following tabsWrap template: <script id="tabsWrap" type="text/x-jquery-tmpl"> <div class="tabs"> {{each $item.html("h3", true)}} <div class="tabState_${$index === selectedTabIndex}"> ${$value} </div> {{/each}} </div> <div class="tabBody"> {{html $item.html("div")[selectedTabIndex]}} </div> </script> The tabs DIV contains all of the tabs. The {{each}} template tag is used to loop through each of the H3 elements from the source template and render a DIV tag that represents a particular tab. The template item html() method is used to filter content from the “source” HTML template. The html() method accepts a jQuery selector for its first parameter. The tabs are retrieved from the source template by using an h3 filter. The second parameter passed to the html() method – the textOnly parameter -- causes the filter to return the inner text of each h3 element. You can learn more about the html() method at the jQuery website (see the section on $item.html()). The tabBody DIV renders the body of the selected tab. Notice that the {{html}} template tag is used to display the tab body so that HTML content in the body won’t be HTML encoded. The html() method is used, once again, to grab all of the DIV elements from the source HTML template. The selectedTabIndex global variable is used to display the contents of the selected tab. Remote Templates A common feature request for jQuery templates is support for remote templates. Developers want to be able to separate templates into different files. Adding support for remote templates requires only a few lines of extra code (Dave Ward has a nice blog entry on this). For example, the following page uses a remote template from a file named BookTemplate.htm: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Remote Templates</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg" }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg" }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg" }, ]; // Get the remote template $.get("BookTemplate.htm", null, function (bookTemplate) { // Render the books using the remote template $.tmpl(bookTemplate, books).appendTo("#bookContainer"); }); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> The remote template is retrieved (and rendered) with the following code: // Get the remote template $.get("BookTemplate.htm", null, function (bookTemplate) { // Render the books using the remote template $.tmpl(bookTemplate, books).appendTo("#bookContainer"); }); This code uses the standard jQuery $.get() method to get the BookTemplate.htm file from the server with an Ajax request. After the BookTemplate.htm file is successfully retrieved, the $.tmpl() method is used to render an array of books with the template. Here’s what the BookTemplate.htm file looks like: <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> Notice that the template in the BooksTemplate.htm file is not wrapped by a SCRIPT element. There is no need to wrap the template in this case because there is no possibility that the template will get interpreted before you want it to be interpreted. If you plan to use the bookTemplate multiple times – for example, you are paging or sorting the books -- then you should compile the template into a function and cache the compiled template function. For example, the following page can be used to page through a list of 100 products (using iPhone style More paging). <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Template Caching</title> <link href="6_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Products</h1> <div id="productContainer"></div> <button id="more">More</button> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Globals var pageIndex = 0; // Create an array of products var products = []; for (var i = 0; i < 100; i++) { products.push({ name: "Product " + (i + 1) }); } // Get the remote template $.get("ProductTemplate.htm", null, function (productTemplate) { // Compile and cache the template $.template("productTemplate", productTemplate); // Render the products renderProducts(0); }); $("#more").click(function () { pageIndex++; renderProducts(); }); function renderProducts() { // Get page of products var pageOfProducts = products.slice(pageIndex * 5, pageIndex * 5 + 5); // Used cached productTemplate to render products $.tmpl("productTemplate", pageOfProducts).appendTo("#productContainer"); } function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> The ProductTemplate is retrieved from an external file named ProductTemplate.htm. This template is retrieved only once. Furthermore, it is compiled and cached with the help of the $.template() method: // Get the remote template $.get("ProductTemplate.htm", null, function (productTemplate) { // Compile and cache the template $.template("productTemplate", productTemplate); // Render the products renderProducts(0); }); The $.template() method compiles the HTML representation of the template into a JavaScript function and caches the template function with the name productTemplate. The cached template can be used by calling the $.tmp() method. The productTemplate is used in the renderProducts() method: function renderProducts() { // Get page of products var pageOfProducts = products.slice(pageIndex * 5, pageIndex * 5 + 5); // Used cached productTemplate to render products $.tmpl("productTemplate", pageOfProducts).appendTo("#productContainer"); } In the code above, the first parameter passed to the $.tmpl() method is the name of a cached template. Working with Template Items In this final section, I want to devote some space to discussing Template Items. A new Template Item is created for each rendered instance of a template. For example, if you are displaying a list of 100 products with a template, then 100 Template Items are created. A Template Item has the following properties and methods: data – The data associated with the Template Instance. For example, a product. tmpl – The template associated with the Template Instance. parent – The parent template item if the template is nested. nodes – The HTML content of the template. calls – Used by {{wrap}} template tag. nest – Used by {{tmpl}} template tag. wrap – Used to imperatively enable wrapped templates. html – Used to filter content from a wrapped template. See the above section on wrapped templates. update – Used to re-render a template item. The last method – the update() method -- is especially interesting because it enables you to re-render a template item with new data or even a new template. For example, the following page displays a list of books. When you hover your mouse over any of the books, additional book details are displayed. In the following screenshot, details for ASP.NET Kick Start are displayed. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Template Item</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div class="bookItem"> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> <script id="bookDetailsTemplate" type="text/x-jQuery-tmpl"> <div class="bookItem"> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} <p> ${description} </p> </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg", description: "The most comprehensive book on Microsoft’s new ASP.NET 4.. " }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg", description: "Writing for professional programmers, Walther explains the crucial concepts that make the Model-View-Controller (MVC) development paradigm work…" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg", description: "Visual Studio .NET is the premier development environment for creating .NET applications…." }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg", description: "ASP.NET MVC Unleashed for the iPhone…" }, ]; // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); // Get compiled details template var bookDetailsTemplate = $("#bookDetailsTemplate").template(); // Add hover handler $(".bookItem").mouseenter(function () { // Get template item associated with DIV var templateItem = $(this).tmplItem(); // Change template to compiled template templateItem.tmpl = bookDetailsTemplate; // Re-render template templateItem.update(); }); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> There are two templates used to display a book: bookTemplate and bookDetailsTemplate. When you hover your mouse over a template item, the standard bookTemplate is swapped out for the bookDetailsTemplate. The bookDetailsTemplate displays a book description. The books are rendered with the bookTemplate with the following line of code: // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); The following code is used to swap the bookTemplate and the bookDetailsTemplate to show details for a book: // Get compiled details template var bookDetailsTemplate = $("#bookDetailsTemplate").template(); // Add hover handler $(".bookItem").mouseenter(function () { // Get template item associated with DIV var templateItem = $(this).tmplItem(); // Change template to compiled template templateItem.tmpl = bookDetailsTemplate; // Re-render template templateItem.update(); }); When you hover your mouse over a DIV element rendered by the bookTemplate, the mouseenter handler executes. First, this handler retrieves the Template Item associated with the DIV element by calling the tmplItem() method. The tmplItem() method returns a Template Item. Next, a new template is assigned to the Template Item. Notice that a compiled version of the bookDetailsTemplate is assigned to the Template Item’s tmpl property. The template is compiled earlier in the code by calling the template() method. Finally, the Template Item update() method is called to re-render the Template Item with the bookDetailsTemplate instead of the original bookTemplate. Summary This is a long blog entry and I still have not managed to cover all of the features of jQuery Templates J However, I’ve tried to cover the most important features of jQuery Templates such as template composition, template wrapping, and template items. To learn more about jQuery Templates, I recommend that you look at the documentation for jQuery Templates at the official jQuery website. Another great way to learn more about jQuery Templates is to look at the (unminified) source code.

Read the article

CodePlex Daily Summary for Saturday, August 09, 2014

CodePlex Daily Summary for Saturday, August 09, 2014Popular ReleasesSEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...QuickDAL: Initial Public Build: We recommend simply forking the source into your project. But you can use this DLL and PDB (debug symbols) if you'd rather not add clutter to your solution.N-Tier Entity Framework: N-Tier Entity Framework - 1.5 Beta 2: This is a pre-release version. Contents: N-Tier Entity Framework (VS2010).1.5.0-beta002.vsix N-Tier Entity Framework (VS2012).1.5.0-beta002.vsix N-Tier Entity Framework (VS2013).1.5.0-beta002.vsixThe Freemwork - An open game framework in C# .NET: v0.2 - Vortigaunt: Added space partitionning support Added depth support on CompositeSpriteHolder Added multiple components Added camera strategies Added extensions and math methods Added another constructor to Identity2D Updated Tools.TuplesFromT64 to support multiple layers of tiles Updated Identity2D.GlobalTransform property : now returns the screen position, regardless of Identity2D.DependsOnCamera Fixed Rectangle.Transform method Fixed sprite depth support Fixed wrong mathematic functions Multiple bugfixesLanMngmtXL: LanMngmtXL-1.0.61: This release includes binary files for 64 bit OS, source code and manual. Changes- host arp tables loaded - if more than 1 million rows then data saved to several excel tabs Quick How-To (using binary file)Follow these steps to use the software. Check included documentation for more details: Unpack ZIP file Download aditional tools for retrieving configurations like Plink (save to C:\Putty\plink.exe) or WVT (read documentation) Create a device list to get configurations (ex. devices.txt...Remote Linq: Demo - RemoteQueryableToEntityFramework: Demo application to show dynamic queries (joins, aggregations, groupings, projections, etc.) over WCF using EF on server sideTransMock: TransMock 0.9.1 (Beta): Minor fixes of the assembly name with the BizUnit steps Updated the name of the isntaller to indicate that it is for BizTalk server 2010. Tested and working with BizTalk 2013 as well, though assemblies are compiled for .NET 4.0.SharePoint 2013 Lync Presence using jQuery: jQuery Lync Presence: I have fixed the same user multiple times on page issue in this release (Issue # 1506)Dynamics AX IEIDE Project Explorer: IEIDE.1.1.40803.1: Installing the project: 1. Install the ax model file; do this by running the following commands on the machine having the AX Management Tools: 1.a. cmd (depending if you have UAC enabled, you may want to Run as administrator); 1.b. net stop aos60$01 (wait until you have your AOS stopped); 1.c. cd "c:\Program Files\Microsoft Dynamics AX\60\ManagementUtili ties\" 1.d. axutil import /file:c:\IEIDE.1.1.40806.1.axmodel /verbose 1.e. net start aos60$01 1.f. start the client and select Skip 2. Per...Facebook Graph Toolkit: Facebook Graph Toolkit 5.1: Updated to 100 Graph Api endpoint mappings with 258 object propertiesJSLint.NET: JSLint.NET 1.6.4: Bugs: #38: MSBuild task support for linked settings file. #40: Explicitly typed imports / exports required in some Visual Studio environments.Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialLexisnexis directory of corporate affiliates Text Analyzer: Lexisnexis Text Analyzer: This version has functions below.Standards to analyze, columns, keywords editing Import of document Export to CSV and Microsoft Excel fileWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.New Projects2113110030: ten: pham van long mon: oop 2113110282: Mon: OPP Ten: Tran Thanh Danh2113110294: Mon: OOP Ten: Vo Ngoc Thai Lop:CCQ1311LAarena: TESTSTSTBowling Game: Program that makes you the follow-up to a game of bowling scoresCTP API for .NET: Comprehensive Trading Platform Application Programming Interface for the .NET Framework CTP API Version: V6.3.0Dashboard Chart Exporter for Microsoft Dynamics CRM 2013: Tool to export Dashboard Charts as Image files in Microsoft Dynamics CRM 2013MergeHosts: A python script to merge hosts file together for those enjoying a clean browsing experienceMFCBDAINF: BDA DTV topology information applicationNetFlux Tunneler Client: This client is a simple Tunneler that creates a TCP connection to the server and sends a custom designed header (originally to bypass firewalls) to the server.NetFlux Tunneler Server: This server is a simple Tunneler that accepts a TCP connection from the client and forwards it to another address, intercepting the custom header. oDesk .NET Library: oDesk .NET Portable Library developed by Andrew SorochakOooPlayer: Lightweight music player that supports mp3, aac, ogg, opus, flac, alac, ape, mpc, tta, wv, wma, ac3OOP-2113110292: class :OOP Name : Nguyen Minh TanOOP-2113110299: Mon: OOP Ten: Nguyen Minh Xuan Lop: CCQ1311LA Truong: Cao dang Cong Thuong - Tp. Ho Chi MinhSFML Tower Defence: SFML Tower defence game that was meant to demonstrate the principals taught in the NWU Potchefstroom EERI 314 course. The game is created using SFML and C++.The Happy Birthday Dad Project: A happy birthday message for my dad???????: ???????QQ:2281595668，?????，????，????　　????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、??????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，?????????????????: ?????????????: ????????????: ????????????: ???????????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,???????: ???????QQ：2281595668，?????，????，????。????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、?????????、??????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ??????????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ?????????????: ????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ???????QQ：2281595668，?????，????，????。????????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ???????????: 5454??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ???????????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ??????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ????? QQ:2281595668，?????，????，????。????? ?????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ???????????: ?????QQ:2281595668，?????，????，????　　???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，?????????????????: jhfiwegb?????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，??????????????????????????????: ???????????: ???????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,????????????????????: ?????????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???? ?????，?????????????: ???????????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ??????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????????????: ??????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ????? QQ:2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ????????????????: ?????????????????: ?????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ???????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ????? QQ：2281595668，?????，????，????。?????????? ???????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，???????: ?????????????: ???????????: ??????????: ??????????: ????????????: ??????????????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????　　??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ????????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: xtbjza??????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、????????????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,????????: ?????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。????? ??，??????????????????????。????????，????????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，?????????: ????????????: ?????QQ:2281595668??????: ???????????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????????: ??????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ??????????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????: ????????????: ??????????????: ????????QQ:2281595668，?????，????，????　　??????????????????????，??1998?7??????，??????????，?????????，?????????????，?????????????????????????. ????????????????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ?????????????: ?????????????: ???????????: ????? QQ：2281595668，?????，????，????。????? ???????????????????，????????????，????? ?98???????????，????，??????????，?????????. 　　?????????,????????????????，??????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: 　?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”??????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????????????: ????????????????: ????????????????: ?????????????: ????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ????????????：　　?????：??????、??、??、????、????(??、??、????)???、???????、?????、?????????????????(???、??、???、??、???); 　　?????：???、?????、???、?????(??、??、??、???)、?????(??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ???????????: ????????????: ????????????: ?????????????: ???????QQ:2281595668，?????，????，????　　????????????????????????????,????????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;?????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ?????????????: ?????????????: ?????????????: ???????QQ：2281595668，?????，????，????。　　????????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、?????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ???????QQ：2281595668，?????，????，????。???????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???? ?????，?????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、????????????????: ???????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ?????????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、????????: ?????????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ???????QQ：2281595668，?????，????，????。???????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，??????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，???????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ???????????: ?????????????: ???????

Read the article

Silverlight Recruiting Application Part 5 - Jobs Module / View

Now we starting getting into a more code-heavy portion of this series, thankfully though this means the groundwork is all set for the most part and after adding the modules we will have a complete application that can be provided with full source. The Jobs module will have two concerns- adding and maintaining jobs that can then be broadcast out to the website. How they are displayed on the site will be handled by our admin system (which will just poll from this common database), so we aren't too concerned with that, but rather with getting the information into the system and allowing the backend administration/HR users to keep things up to date. Since there is a fair bit of information that we want to display, we're going to move editing to a separate view so we can get all that information in an easy-to-use spot. With all the files created for this module, the project looks something like this: And now... on to the code. XAML for the Job Posting View All we really need for the Job Posting View is a RadGridView and a few buttons. This will let us both show off records and perform operations on the records without much hassle. That XAML is going to look something like this: 01.<Grid x:Name="LayoutRoot" 02.Background="White"> 03.<Grid.RowDefinitions> 04.<RowDefinition Height="30" /> 05.<RowDefinition /> 06.</Grid.RowDefinitions> 07.<StackPanel Orientation="Horizontal"> 08.<Button x:Name="xAddRecordButton" 09.Content="Add Job" 10.Width="120" 11.cal:Click.Command="{Binding AddRecord}" 12.telerik:StyleManager.Theme="Windows7" /> 13.<Button x:Name="xEditRecordButton" 14.Content="Edit Job" 15.Width="120" 16.cal:Click.Command="{Binding EditRecord}" 17.telerik:StyleManager.Theme="Windows7" /> 18.</StackPanel> 19.<telerikGrid:RadGridView x:Name="xJobsGrid" 20.Grid.Row="1" 21.IsReadOnly="True" 22.AutoGenerateColumns="False" 23.ColumnWidth="*" 24.RowDetailsVisibilityMode="VisibleWhenSelected" 25.ItemsSource="{Binding MyJobs}" 26.SelectedItem="{Binding SelectedJob, Mode=TwoWay}" 27.command:SelectedItemChangedEventClass.Command="{Binding SelectedItemChanged}"> 28.<telerikGrid:RadGridView.Columns> 29.<telerikGrid:GridViewDataColumn Header="Job Title" 30.DataMemberBinding="{Binding JobTitle}" 31.UniqueName="JobTitle" /> 32.<telerikGrid:GridViewDataColumn Header="Location" 33.DataMemberBinding="{Binding Location}" 34.UniqueName="Location" /> 35.<telerikGrid:GridViewDataColumn Header="Resume Required" 36.DataMemberBinding="{Binding NeedsResume}" 37.UniqueName="NeedsResume" /> 38.<telerikGrid:GridViewDataColumn Header="CV Required" 39.DataMemberBinding="{Binding NeedsCV}" 40.UniqueName="NeedsCV" /> 41.<telerikGrid:GridViewDataColumn Header="Overview Required" 42.DataMemberBinding="{Binding NeedsOverview}" 43.UniqueName="NeedsOverview" /> 44.<telerikGrid:GridViewDataColumn Header="Active" 45.DataMemberBinding="{Binding IsActive}" 46.UniqueName="IsActive" /> 47.</telerikGrid:RadGridView.Columns> 48.</telerikGrid:RadGridView> 49.</Grid> I'll explain what's happening here by line numbers: Lines 11 and 16: Using the same type of click commands as we saw in the Menu module, we tie the button clicks to delegate commands in the viewmodel. Line 25: The source for the jobs will be a collection in the viewmodel. Line 26: We also bind the selected item to a public property from the viewmodel for use in code. Line 27: We've turned the event into a command so we can handle it via code in the viewmodel. So those first three probably make sense to you as far as Silverlight/WPF binding magic is concerned, but for line 27... This actually comes from something I read onDamien Schenkelman's blog back in the day for creating an attached behavior from any event. So, any time you see me using command:Whatever.Command, the backing for it is actually something like this: SelectedItemChangedEventBehavior.cs: 01.public class SelectedItemChangedEventBehavior : CommandBehaviorBase<Telerik.Windows.Controls.DataControl> 02.{ 03.public SelectedItemChangedEventBehavior(DataControl element) 04.: base(element) 05.{ 06.element.SelectionChanged += new EventHandler<SelectionChangeEventArgs>(element_SelectionChanged); 07.} 08.void element_SelectionChanged(object sender, SelectionChangeEventArgs e) 09.{ 10.// We'll only ever allow single selection, so will only need item index 0 11.base.CommandParameter = e.AddedItems[0]; 12.base.ExecuteCommand(); 13.} 14.} SelectedItemChangedEventClass.cs: 01.public class SelectedItemChangedEventClass 02.{ 03.#region The Command Stuff 04.public static ICommand GetCommand(DependencyObject obj) 05.{ 06.return (ICommand)obj.GetValue(CommandProperty); 07.} 08.public static void SetCommand(DependencyObject obj, ICommand value) 09.{ 10.obj.SetValue(CommandProperty, value); 11.} 12.public static readonly DependencyProperty CommandProperty = 13.DependencyProperty.RegisterAttached("Command", typeof(ICommand), 14.typeof(SelectedItemChangedEventClass), new PropertyMetadata(OnSetCommandCallback)); 15.public static void OnSetCommandCallback(DependencyObject dependencyObject, DependencyPropertyChangedEventArgs e) 16.{ 17.DataControl element = dependencyObject as DataControl; 18.if (element != null) 19.{ 20.SelectedItemChangedEventBehavior behavior = GetOrCreateBehavior(element); 21.behavior.Command = e.NewValue as ICommand; 22.} 23.} 24.#endregion 25.public static SelectedItemChangedEventBehavior GetOrCreateBehavior(DataControl element) 26.{ 27.SelectedItemChangedEventBehavior behavior = element.GetValue(SelectedItemChangedEventBehaviorProperty) as SelectedItemChangedEventBehavior; 28.if (behavior == null) 29.{ 30.behavior = new SelectedItemChangedEventBehavior(element); 31.element.SetValue(SelectedItemChangedEventBehaviorProperty, behavior); 32.} 33.return behavior; 34.} 35.public static SelectedItemChangedEventBehavior GetSelectedItemChangedEventBehavior(DependencyObject obj) 36.{ 37.return (SelectedItemChangedEventBehavior)obj.GetValue(SelectedItemChangedEventBehaviorProperty); 38.} 39.public static void SetSelectedItemChangedEventBehavior(DependencyObject obj, SelectedItemChangedEventBehavior value) 40.{ 41.obj.SetValue(SelectedItemChangedEventBehaviorProperty, value); 42.} 43.public static readonly DependencyProperty SelectedItemChangedEventBehaviorProperty = 44.DependencyProperty.RegisterAttached("SelectedItemChangedEventBehavior", 45.typeof(SelectedItemChangedEventBehavior), typeof(SelectedItemChangedEventClass), null); 46.} These end up looking very similar from command to command, but in a nutshell you create a command based on any event, determine what the parameter for it will be, then execute. It attaches via XAML and ties to a DelegateCommand in the viewmodel, so you get the full event experience (since some controls get a bit event-rich for added functionality). Simple enough, right? Viewmodel for the Job Posting View The Viewmodel is going to need to handle all events going back and forth, maintaining interactions with the data we are using, and both publishing and subscribing to events. Rather than breaking this into tons of little pieces, I'll give you a nice view of the entire viewmodel and then hit up the important points line-by-line: 001.public class JobPostingViewModel : ViewModelBase 002.{ 003.private readonly IEventAggregator eventAggregator; 004.private readonly IRegionManager regionManager; 005.public DelegateCommand<object> AddRecord { get; set; } 006.public DelegateCommand<object> EditRecord { get; set; } 007.public DelegateCommand<object> SelectedItemChanged { get; set; } 008.public RecruitingContext context; 009.private QueryableCollectionView _myJobs; 010.public QueryableCollectionView MyJobs 011.{ 012.get { return _myJobs; } 013.} 014.private QueryableCollectionView _selectionJobActionHistory; 015.public QueryableCollectionView SelectedJobActionHistory 016.{ 017.get { return _selectionJobActionHistory; } 018.} 019.private JobPosting _selectedJob; 020.public JobPosting SelectedJob 021.{ 022.get { return _selectedJob; } 023.set 024.{ 025.if (value != _selectedJob) 026.{ 027._selectedJob = value; 028.NotifyChanged("SelectedJob"); 029.} 030.} 031.} 032.public SubscriptionToken editToken = new SubscriptionToken(); 033.public SubscriptionToken addToken = new SubscriptionToken(); 034.public JobPostingViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 035.{ 036.// set Unity items 037.this.eventAggregator = eventAgg; 038.this.regionManager = regionmanager; 039.// load our context 040.context = new RecruitingContext(); 041.this._myJobs = new QueryableCollectionView(context.JobPostings); 042.context.Load(context.GetJobPostingsQuery()); 043.// set command events 044.this.AddRecord = new DelegateCommand<object>(this.AddNewRecord); 045.this.EditRecord = new DelegateCommand<object>(this.EditExistingRecord); 046.this.SelectedItemChanged = new DelegateCommand<object>(this.SelectedRecordChanged); 047.SetSubscriptions(); 048.} 049.#region DelegateCommands from View 050.public void AddNewRecord(object obj) 051.{ 052.this.eventAggregator.GetEvent<AddJobEvent>().Publish(true); 053.} 054.public void EditExistingRecord(object obj) 055.{ 056.if (_selectedJob == null) 057.{ 058.this.eventAggregator.GetEvent<NotifyUserEvent>().Publish("No job selected."); 059.} 060.else 061.{ 062.this._myJobs.EditItem(this._selectedJob); 063.this.eventAggregator.GetEvent<EditJobEvent>().Publish(this._selectedJob); 064.} 065.} 066.public void SelectedRecordChanged(object obj) 067.{ 068.if (obj.GetType() == typeof(ActionHistory)) 069.{ 070.// event bubbles up so we don't catch items from the ActionHistory grid 071.} 072.else 073.{ 074.JobPosting job = obj as JobPosting; 075.GrabHistory(job.PostingID); 076.} 077.} 078.#endregion 079.#region Subscription Declaration and Events 080.public void SetSubscriptions() 081.{ 082.EditJobCompleteEvent editComplete = eventAggregator.GetEvent<EditJobCompleteEvent>(); 083.if (editToken != null) 084.editComplete.Unsubscribe(editToken); 085.editToken = editComplete.Subscribe(this.EditCompleteEventHandler); 086.AddJobCompleteEvent addComplete = eventAggregator.GetEvent<AddJobCompleteEvent>(); 087.if (addToken != null) 088.addComplete.Unsubscribe(addToken); 089.addToken = addComplete.Subscribe(this.AddCompleteEventHandler); 090.} 091.public void EditCompleteEventHandler(bool complete) 092.{ 093.if (complete) 094.{ 095.JobPosting thisJob = _myJobs.CurrentEditItem as JobPosting; 096.this._myJobs.CommitEdit(); 097.this.context.SubmitChanges((s) => 098.{ 099.ActionHistory myAction = new ActionHistory(); 100.myAction.PostingID = thisJob.PostingID; 101.myAction.Description = String.Format("Job '{0}' has been edited by {1}", thisJob.JobTitle, "default user"); 102.myAction.TimeStamp = DateTime.Now; 103.eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 104.} 105., null); 106.} 107.else 108.{ 109.this._myJobs.CancelEdit(); 110.} 111.this.MakeMeActive(this.regionManager, "MainRegion", "JobPostingsView"); 112.} 113.public void AddCompleteEventHandler(JobPosting job) 114.{ 115.if (job == null) 116.{ 117.// do nothing, new job add cancelled 118.} 119.else 120.{ 121.this.context.JobPostings.Add(job); 122.this.context.SubmitChanges((s) => 123.{ 124.ActionHistory myAction = new ActionHistory(); 125.myAction.PostingID = job.PostingID; 126.myAction.Description = String.Format("Job '{0}' has been added by {1}", job.JobTitle, "default user"); 127.myAction.TimeStamp = DateTime.Now; 128.eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 129.} 130., null); 131.} 132.this.MakeMeActive(this.regionManager, "MainRegion", "JobPostingsView"); 133.} 134.#endregion 135.public void GrabHistory(int postID) 136.{ 137.context.ActionHistories.Clear(); 138._selectionJobActionHistory = new QueryableCollectionView(context.ActionHistories); 139.context.Load(context.GetHistoryForJobQuery(postID)); 140.} Taking it from the top, we're injecting an Event Aggregator and Region Manager for use down the road and also have the public DelegateCommands (just like in the Menu module). We also grab a reference to our context, which we'll obviously need for data, then set up a few fields with public properties tied to them. We're also setting subscription tokens, which we have not yet seen but I will get into below. The AddNewRecord (50) and EditExistingRecord (54) methods should speak for themselves for functionality, the one thing of note is we're sending events off to the Event Aggregator which some module, somewhere will take care of. Since these aren't entirely relying on one another, the Jobs View doesn't care if anyone is listening, but it will publish AddJobEvent (52), NotifyUserEvent (58) and EditJobEvent (63)regardless. Don't mind the GrabHistory() method so much, that is just grabbing history items (visibly being created in the SubmitChanges callbacks), and adding them to the database. Every action will trigger a history event, so we'll know who modified what and when, just in case. ;) So where are we at? Well, if we click to Add a job, we publish an event, if we edit a job, we publish an event with the selected record (attained through the magic of binding). Where is this all going though? To the Viewmodel, of course! XAML for the AddEditJobView This is pretty straightforward except for one thing, noted below: 001.<Grid x:Name="LayoutRoot" 002.Background="White"> 003.<Grid x:Name="xEditGrid" 004.Margin="10" 005.validationHelper:ValidationScope.Errors="{Binding Errors}"> 006.<Grid.Background> 007.<LinearGradientBrush EndPoint="0.5,1" 008.StartPoint="0.5,0"> 009.<GradientStop Color="#FFC7C7C7" 010.Offset="0" /> 011.<GradientStop Color="#FFF6F3F3" 012.Offset="1" /> 013.</LinearGradientBrush> 014.</Grid.Background> 015.<Grid.RowDefinitions> 016.<RowDefinition Height="40" /> 017.<RowDefinition Height="40" /> 018.<RowDefinition Height="40" /> 019.<RowDefinition Height="100" /> 020.<RowDefinition Height="100" /> 021.<RowDefinition Height="100" /> 022.<RowDefinition Height="40" /> 023.<RowDefinition Height="40" /> 024.<RowDefinition Height="40" /> 025.</Grid.RowDefinitions> 026.<Grid.ColumnDefinitions> 027.<ColumnDefinition Width="150" /> 028.<ColumnDefinition Width="150" /> 029.<ColumnDefinition Width="300" /> 030.<ColumnDefinition Width="100" /> 031.</Grid.ColumnDefinitions> 032. 033.<TextBlock Margin="8" 034.Text="{Binding AddEditString}" 035.TextWrapping="Wrap" 036.Grid.Column="1" 037.Grid.ColumnSpan="2" 038.FontSize="16" /> 039. 040. 041.<TextBlock Margin="8,0,0,0" 042.Style="{StaticResource LabelTxb}" 043.Grid.Row="1" 044.Text="Job Title" 045.VerticalAlignment="Center" /> 046.<TextBox x:Name="xJobTitleTB" 047.Margin="0,8" 048.Grid.Column="1" 049.Grid.Row="1" 050.Text="{Binding activeJob.JobTitle, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}" 051.Grid.ColumnSpan="2" /> 052.<TextBlock Margin="8,0,0,0" 053.Grid.Row="2" 054.Text="Location" 055.d:LayoutOverrides="Height" 056.VerticalAlignment="Center" /> 057.<TextBox x:Name="xLocationTB" 058.Margin="0,8" 059.Grid.Column="1" 060.Grid.Row="2" 061.Text="{Binding activeJob.Location, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}" 062.Grid.ColumnSpan="2" /> 063. 064.<TextBlock Margin="8,11,8,0" 065.Grid.Row="3" 066.Text="Description" 067.TextWrapping="Wrap" 068.VerticalAlignment="Top" /> 069. 070.<TextBox x:Name="xDescriptionTB" 071.Height="84" 072.TextWrapping="Wrap" 073.ScrollViewer.VerticalScrollBarVisibility="Auto" 074.Grid.Column="1" 075.Grid.Row="3" 076.Text="{Binding activeJob.Description, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}" 077.Grid.ColumnSpan="2" /> 078.<TextBlock Margin="8,11,8,0" 079.Grid.Row="4" 080.Text="Requirements" 081.TextWrapping="Wrap" 082.VerticalAlignment="Top" /> 083. 084.<TextBox x:Name="xRequirementsTB" 085.Height="84" 086.TextWrapping="Wrap" 087.ScrollViewer.VerticalScrollBarVisibility="Auto" 088.Grid.Column="1" 089.Grid.Row="4" 090.Text="{Binding activeJob.Requirements, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}" 091.Grid.ColumnSpan="2" /> 092.<TextBlock Margin="8,11,8,0" 093.Grid.Row="5" 094.Text="Qualifications" 095.TextWrapping="Wrap" 096.VerticalAlignment="Top" /> 097. 098.<TextBox x:Name="xQualificationsTB" 099.Height="84" 100.TextWrapping="Wrap" 101.ScrollViewer.VerticalScrollBarVisibility="Auto" 102.Grid.Column="1" 103.Grid.Row="5" 104.Text="{Binding activeJob.Qualifications, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}" 105.Grid.ColumnSpan="2" /> 106. 107. 108.<CheckBox x:Name="xResumeRequiredCB" Margin="8,8,8,15" 109.Content="Resume Required" 110.Grid.Row="6" 111.Grid.ColumnSpan="2" 112.IsChecked="{Binding activeJob.NeedsResume, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}"/> 113. 114.<CheckBox x:Name="xCoverletterRequiredCB" Margin="8,8,8,15" 115.Content="Cover Letter Required" 116.Grid.Column="2" 117.Grid.Row="6" 118.IsChecked="{Binding activeJob.NeedsCV, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}"/> 119. 120.<CheckBox x:Name="xOverviewRequiredCB" Margin="8,8,8,15" 121.Content="Overview Required" 122.Grid.Row="7" 123.Grid.ColumnSpan="2" 124.IsChecked="{Binding activeJob.NeedsOverview, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}"/> 125. 126.<CheckBox x:Name="xJobActiveCB" Margin="8,8,8,15" 127.Content="Job is Active" 128.Grid.Column="2" 129.Grid.Row="7" 130.IsChecked="{Binding activeJob.IsActive, Mode=TwoWay, NotifyOnValidationError=True, ValidatesOnExceptions=True}"/> 131. 132. 133. 134.<Button x:Name="xAddEditButton" Margin="8,8,0,10" 135.Content="{Binding AddEditButtonString}" 136.cal:Click.Command="{Binding AddEditCommand}" 137.Grid.Column="2" 138.Grid.Row="8" 139.HorizontalAlignment="Left" 140.Width="125" 141.telerik:StyleManager.Theme="Windows7" /> 142. 143.<Button x:Name="xCancelButton" HorizontalAlignment="Right" 144.Content="Cancel" 145.cal:Click.Command="{Binding CancelCommand}" 146.Margin="0,8,8,10" 147.Width="125" 148.Grid.Column="2" 149.Grid.Row="8" 150.telerik:StyleManager.Theme="Windows7" /> 151.</Grid> 152.</Grid> The 'validationHelper:ValidationScope' line may seem odd. This is a handy little trick for catching current and would-be validation errors when working in this whole setup. This all comes from an approach found on theJoy Of Code blog, although it looks like the story for this will be changing slightly with new advances in SL4/WCF RIA Services, so this section can definitely get an overhaul a little down the road. The code is the fun part of all this, so let us see what's happening under the hood. Viewmodel for the AddEditJobView We are going to see some of the same things happening here, so I'll skip over the repeat info and get right to the good stuff: 001.public class AddEditJobViewModel : ViewModelBase 002.{ 003.private readonly IEventAggregator eventAggregator; 004.private readonly IRegionManager regionManager; 005. 006.public RecruitingContext context; 007. 008.private JobPosting _activeJob; 009.public JobPosting activeJob 010.{ 011.get { return _activeJob; } 012.set 013.{ 014.if (_activeJob != value) 015.{ 016._activeJob = value; 017.NotifyChanged("activeJob"); 018.} 019.} 020.} 021. 022.public bool isNewJob; 023. 024.private string _addEditString; 025.public string AddEditString 026.{ 027.get { return _addEditString; } 028.set 029.{ 030.if (_addEditString != value) 031.{ 032._addEditString = value; 033.NotifyChanged("AddEditString"); 034.} 035.} 036.} 037. 038.private string _addEditButtonString; 039.public string AddEditButtonString 040.{ 041.get { return _addEditButtonString; } 042.set 043.{ 044.if (_addEditButtonString != value) 045.{ 046._addEditButtonString = value; 047.NotifyChanged("AddEditButtonString"); 048.} 049.} 050.} 051. 052.public SubscriptionToken addJobToken = new SubscriptionToken(); 053.public SubscriptionToken editJobToken = new SubscriptionToken(); 054. 055.public DelegateCommand<object> AddEditCommand { get; set; } 056.public DelegateCommand<object> CancelCommand { get; set; } 057. 058.private ObservableCollection<ValidationError> _errors = new ObservableCollection<ValidationError>(); 059.public ObservableCollection<ValidationError> Errors 060.{ 061.get { return _errors; } 062.} 063. 064.private ObservableCollection<ValidationResult> _valResults = new ObservableCollection<ValidationResult>(); 065.public ObservableCollection<ValidationResult> ValResults 066.{ 067.get { return this._valResults; } 068.} 069. 070.public AddEditJobViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 071.{ 072.// set Unity items 073.this.eventAggregator = eventAgg; 074.this.regionManager = regionmanager; 075. 076.context = new RecruitingContext(); 077. 078.AddEditCommand = new DelegateCommand<object>(this.AddEditJobCommand); 079.CancelCommand = new DelegateCommand<object>(this.CancelAddEditCommand); 080. 081.SetSubscriptions(); 082.} 083. 084.#region Subscription Declaration and Events 085. 086.public void SetSubscriptions() 087.{ 088.AddJobEvent addJob = this.eventAggregator.GetEvent<AddJobEvent>(); 089. 090.if (addJobToken != null) 091.addJob.Unsubscribe(addJobToken); 092. 093.addJobToken = addJob.Subscribe(this.AddJobEventHandler); 094. 095.EditJobEvent editJob = this.eventAggregator.GetEvent<EditJobEvent>(); 096. 097.if (editJobToken != null) 098.editJob.Unsubscribe(editJobToken); 099. 100.editJobToken = editJob.Subscribe(this.EditJobEventHandler); 101.} 102. 103.public void AddJobEventHandler(bool isNew) 104.{ 105.this.activeJob = null; 106.this.activeJob = new JobPosting(); 107.this.activeJob.IsActive = true; // We assume that we want a new job to go up immediately 108.this.isNewJob = true; 109.this.AddEditString = "Add New Job Posting"; 110.this.AddEditButtonString = "Add Job"; 111. 112.MakeMeActive(this.regionManager, "MainRegion", "AddEditJobView"); 113.} 114. 115.public void EditJobEventHandler(JobPosting editJob) 116.{ 117.this.activeJob = null; 118.this.activeJob = editJob; 119.this.isNewJob = false; 120.this.AddEditString = "Edit Job Posting"; 121.this.AddEditButtonString = "Edit Job"; 122. 123.MakeMeActive(this.regionManager, "MainRegion", "AddEditJobView"); 124.} 125. 126.#endregion 127. 128.#region DelegateCommands from View 129. 130.public void AddEditJobCommand(object obj) 131.{ 132.if (this.Errors.Count > 0) 133.{ 134.List<string> errorMessages = new List<string>(); 135. 136.foreach (var valR in this.Errors) 137.{ 138.errorMessages.Add(valR.Exception.Message); 139.} 140. 141.this.eventAggregator.GetEvent<DisplayValidationErrorsEvent>().Publish(errorMessages); 142. 143.} 144.else if (!Validator.TryValidateObject(this.activeJob, new ValidationContext(this.activeJob, null, null), _valResults, true)) 145.{ 146.List<string> errorMessages = new List<string>(); 147. 148.foreach (var valR in this._valResults) 149.{ 150.errorMessages.Add(valR.ErrorMessage); 151.} 152. 153.this._valResults.Clear(); 154. 155.this.eventAggregator.GetEvent<DisplayValidationErrorsEvent>().Publish(errorMessages); 156.} 157.else 158.{ 159.if (this.isNewJob) 160.{ 161.this.eventAggregator.GetEvent<AddJobCompleteEvent>().Publish(this.activeJob); 162.} 163.else 164.{ 165.this.eventAggregator.GetEvent<EditJobCompleteEvent>().Publish(true); 166.} 167.} 168.} 169. 170.public void CancelAddEditCommand(object obj) 171.{ 172.if (this.isNewJob) 173.{ 174.this.eventAggregator.GetEvent<AddJobCompleteEvent>().Publish(null); 175.} 176.else 177.{ 178.this.eventAggregator.GetEvent<EditJobCompleteEvent>().Publish(false); 179.} 180.} 181. 182.#endregion 183.} 184.} We start seeing something new on line 103- the AddJobEventHandler will create a new job and set that to the activeJob item on the ViewModel. When this is all set, the view calls that familiar MakeMeActive method to activate itself. I made a bit of a management call on making views self-activate like this, but I figured it works for one reason. As I create this application, views may not exist that I have in mind, so after a view receives its 'ping' from being subscribed to an event, it prepares whatever it needs to do and then goes active. This way if I don't have 'edit' hooked up, I can click as the day is long on the main view and won't get lost in an empty region. Total personal preference here. :) Everything else should again be pretty straightforward, although I do a bit of validation checking in the AddEditJobCommand, which can either fire off an event back to the main view/viewmodel if everything is a success or sent a list of errors to our notification module, which pops open a RadWindow with the alerts if any exist. As a bonus side note, here's what my WCF RIA Services metadata looks like for handling all of the validation: private JobPostingMetadata() { } [StringLength(2500, ErrorMessage = "Description should be more than one and less than 2500 characters.", MinimumLength = 1)] [Required(ErrorMessage = "Description is required.")] public string Description; [Required(ErrorMessage="Active Status is Required")] public bool IsActive; [StringLength(100, ErrorMessage = "Posting title must be more than 3 but less than 100 characters.", MinimumLength = 3)] [Required(ErrorMessage = "Job Title is required.")] public bool JobTitle; [Required] public string Location; public bool NeedsCV; public bool NeedsOverview; public bool NeedsResume; public int PostingID; [Required(ErrorMessage="Qualifications are required.")] [StringLength(2500, ErrorMessage="Qualifications should be more than one and less than 2500 characters.", MinimumLength=1)] public string Qualifications; [StringLength(2500, ErrorMessage = "Requirements should be more than one and less than 2500 characters.", MinimumLength = 1)] [Required(ErrorMessage="Requirements are required.")] public string Requirements; The RecruitCB Alternative See all that Xaml I pasted above? Those are now two pieces sitting in the JobsView.xaml file now. The only real difference is that the xEditGrid now sits in the same place as xJobsGrid, with visibility swapping out between the two for a quick switch. I also took out all the cal: and command: command references and replaced Button events with clicks and the Grid selection command replaced with a SelectedItemChanged event. Also, at the bottom of the xEditGrid after the last button, I add a ValidationSummary (with Visibility=Collapsed) to catch any errors that are popping up. Simple as can be, and leads to this being the single code-behind file: 001.public partial class JobsView : UserControl 002.{ 003.public RecruitingContext context; 004.public JobPosting activeJob; 005.public bool isNew; 006.private ObservableCollection<ValidationResult> _valResults = new ObservableCollection<ValidationResult>(); 007.public ObservableCollection<ValidationResult> ValResults 008.{ 009.get { return this._valResults; } 010.} 011.public JobsView() 012.{ 013.InitializeComponent(); 014.this.Loaded += new RoutedEventHandler(JobsView_Loaded); 015.} 016.void JobsView_Loaded(object sender, RoutedEventArgs e) 017.{ 018.context = new RecruitingContext(); 019.xJobsGrid.ItemsSource = context.JobPostings; 020.context.Load(context.GetJobPostingsQuery()); 021.} 022.private void xAddRecordButton_Click(object sender, RoutedEventArgs e) 023.{ 024.activeJob = new JobPosting(); 025.isNew = true; 026.xAddEditTitle.Text = "Add a Job Posting"; 027.xAddEditButton.Content = "Add"; 028.xEditGrid.DataContext = activeJob; 029.HideJobsGrid(); 030.} 031.private void xEditRecordButton_Click(object sender, RoutedEventArgs e) 032.{ 033.activeJob = xJobsGrid.SelectedItem as JobPosting; 034.isNew = false; 035.xAddEditTitle.Text = "Edit a Job Posting"; 036.xAddEditButton.Content = "Edit"; 037.xEditGrid.DataContext = activeJob; 038.HideJobsGrid(); 039.} 040.private void xAddEditButton_Click(object sender, RoutedEventArgs e) 041.{ 042.if (!Validator.TryValidateObject(this.activeJob, new ValidationContext(this.activeJob, null, null), _valResults, true)) 043.{ 044.List<string> errorMessages = new List<string>(); 045.foreach (var valR in this._valResults) 046.{ 047.errorMessages.Add(valR.ErrorMessage); 048.} 049.this._valResults.Clear(); 050.ShowErrors(errorMessages); 051.} 052.else if (xSummary.Errors.Count > 0) 053.{ 054.List<string> errorMessages = new List<string>(); 055.foreach (var err in xSummary.Errors) 056.{ 057.errorMessages.Add(err.Message); 058.} 059.ShowErrors(errorMessages); 060.} 061.else 062.{ 063.if (this.isNew) 064.{ 065.context.JobPostings.Add(activeJob); 066.context.SubmitChanges((s) => 067.{ 068.ActionHistory thisAction = new ActionHistory(); 069.thisAction.PostingID = activeJob.PostingID; 070.thisAction.Description = String.Format("Job '{0}' has been edited by {1}", activeJob.JobTitle, "default user"); 071.thisAction.TimeStamp = DateTime.Now; 072.context.ActionHistories.Add(thisAction); 073.context.SubmitChanges(); 074.}, null); 075.} 076.else 077.{ 078.context.SubmitChanges((s) => 079.{ 080.ActionHistory thisAction = new ActionHistory(); 081.thisAction.PostingID = activeJob.PostingID; 082.thisAction.Description = String.Format("Job '{0}' has been added by {1}", activeJob.JobTitle, "default user"); 083.thisAction.TimeStamp = DateTime.Now; 084.context.ActionHistories.Add(thisAction); 085.context.SubmitChanges(); 086.}, null); 087.} 088.ShowJobsGrid(); 089.} 090.} 091.private void xCancelButton_Click(object sender, RoutedEventArgs e) 092.{ 093.ShowJobsGrid(); 094.} 095.private void ShowJobsGrid() 096.{ 097.xAddEditRecordButtonPanel.Visibility = Visibility.Visible; 098.xEditGrid.Visibility = Visibility.Collapsed; 099.xJobsGrid.Visibility = Visibility.Visible; 100.} 101.private void HideJobsGrid() 102.{ 103.xAddEditRecordButtonPanel.Visibility = Visibility.Collapsed; 104.xJobsGrid.Visibility = Visibility.Collapsed; 105.xEditGrid.Visibility = Visibility.Visible; 106.} 107.private void ShowErrors(List<string> errorList) 108.{ 109.string nm = "Errors received: \n"; 110.foreach (string anerror in errorList) 111.nm += anerror + "\n"; 112.RadWindow.Alert(nm); 113.} 114.} The first 39 lines should be pretty familiar, not doing anything too unorthodox to get this up and running. Once we hit the xAddEditButton_Click on line 40, we're still doing pretty much the same things except instead of checking the ValidationHelper errors, we both run a check on the current activeJob object as well as check the ValidationSummary errors list. Once that is set, we again use the callback of context.SubmitChanges (lines 68 and 78) to create an ActionHistory which we will use to track these items down the line. That's all? Essentially... yes. If you look back through this post, most of the code and adventures we have taken were just to get things working in the MVVM/Prism setup. Since I have the whole 'module' self-contained in a single JobView+code-behind setup, I don't have to worry about things like sending events off into space for someone to pick up, communicating through an Infrastructure project, or even re-inventing events to be used with attached behaviors. Everything just kinda works, and again with much less code. Here's a picture of the MVVM and Code-behind versions on the Jobs and AddEdit views, but since the functionality is the same in both apps you still cannot tell them apart (for two-strike): Looking ahead, the Applicants module is effectively the same thing as the Jobs module, so most of the code is being cut-and-pasted back and forth with minor tweaks here and there. So that one is being taken care of by me behind the scenes. Next time, we get into a new world of fun- the interview scheduling module, which will pull from available jobs and applicants for each interview being scheduled, tying everything together with RadScheduler to the rescue. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Working with Analytic Workflow Manager (AWM) - Part 8 Cube Metadata Analysis

- by Mohan Ramanuja

CUBE SIZEselect dbal.owner||'.'||substr(dbal.table_name,4) awname, sum(dbas.bytes)/1024/1024 as mb, dbas.tablespace_name from dba_lobs dbal, dba_segments dbas where dbal.column_name = 'AWLOB' and dbal.segment_name = dbas.segment_name group by dbal.owner, dbal.table_name, dbas.tablespace_name order by dbal.owner, dbal.table_name SESSION RESOURCES select vses.username||':'||vsst.sid username, vstt.name, max(vsst.value) valuefrom v$sesstat vsst, v$statname vstt, v$session vseswhere vstt.statistic# = vsst.statistic# and vsst.sid = vses.sid andVSES.USERNAME LIKE ('ATTRIBDW_OWN') ANDvstt.name in ('session pga memory', 'session pga memory max', 'session uga memory','session uga memory max', 'session cursor cache count', 'session cursor cache hits', 'session stored procedure space', 'opened cursors current', 'opened cursors cumulative') andvses.username is not null group by vsst.sid, vses.username, vstt.name order by vsst.sid, vses.username, vstt.name OLAP PGA USE select 'OLAP Pages Occupying: '|| round((((select sum(nvl(pool_size,1)) from v$aw_calc)) / (select value from v$pgastat where name = 'total PGA inuse')),2)*100||'%' info from dual union select 'Total PGA Inuse Size: '||value/1024||' KB' info from v$pgastat where name = 'total PGA inuse' union select 'Total OLAP Page Size: '|| round(sum(nvl(pool_size,1))/1024,0)||' KB' info from v$aw_calc order by info desc OLAP PGA USAGE PER USER select vs.username, vs.sid, round(pga_used_mem/1024/1024,2)||' MB' pga_used, round(pga_max_mem/1024/1024,2)||' MB' pga_max, round(pool_size/1024/1024,2)||' MB' olap_pp, round(100*(pool_hits-pool_misses)/pool_hits,2) || '%' olap_ratio from v$process vp, v$session vs, v$aw_calc va where session_id=vs.sid and addr = paddr CUBE LOADING SCRIPT REM The 'set define off' statement is needed only if running this script through SQLPlus.REM If you are using another tool to run this script, the line below may be commented out.set define offBEGIN DBMS_CUBE.BUILD( 'VALIDATE ATTRIBDW_OWN.CURRENCY USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNT USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.DATEDIM USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.CUSIP USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNTRETURN', 'CCCCC', -- refresh methodfalse, -- refresh after errors 0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/BEGIN DBMS_CUBE.BUILD( ' ATTRIBDW_OWN.CURRENCY USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNT USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.DATEDIM USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.CUSIP USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNTRETURN', 'CCCCC', -- refresh methodfalse, -- refresh after errors 0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/ VISUALIZATION OBJECT - AW$ATTRIBDW_OWN CREATE TABLE "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( "PS#" NUMBER(10,0), "GEN#" NUMBER(10,0), "EXTNUM" NUMBER(8,0), "AWLOB" BLOB, "OBJNAME" VARCHAR2(256 BYTE), "PARTNAME" VARCHAR2(256 BYTE) ) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE ( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "AWLOB" ) STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) PARTITION BY RANGE ( "GEN#" ) SUBPARTITION BY HASH ( "PS#", "EXTNUM" ) SUBPARTITIONS 8 ( PARTITION "PTN1" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE READS LOGGING NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP661" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP662" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP663" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP664" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP665" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP666" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP667" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP668" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "PTNN" VALUES LESS THAN (MAXVALUE) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP669" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP670" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP671" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP672" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP673" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP674" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP675" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP676" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."ATTRIBDW_OWN_I$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( "PS#", "GEN#", "EXTNUM" ) PCTFREE 10 INITRANS 4 MAXTRANS 255 COMPUTE STATISTICS STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000406980C00004$$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOCAL (PARTITION "SYS_IL_P711" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP695" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP696" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP697" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP698" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP699" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP700" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP701" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP702" TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "SYS_IL_P712" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP703" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP704" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP705" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP706" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP707" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP708" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP709" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP710" TABLESPACE "ATTRIBDW_DATA" ) ) PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE BUILD LOG CREATE TABLE "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( "BUILD_ID" NUMBER, "SLAVE_NUMBER" NUMBER, "STATUS" VARCHAR2(10 BYTE), "COMMAND" VARCHAR2(25 BYTE), "BUILD_OBJECT" VARCHAR2(30 BYTE), "BUILD_OBJECT_TYPE" VARCHAR2(10 BYTE), "OUTPUT" CLOB, "AW" VARCHAR2(30 BYTE), "OWNER" VARCHAR2(30 BYTE), "PARTITION" VARCHAR2(50 BYTE), "SCHEDULER_JOB" VARCHAR2(100 BYTE), "TIME" TIMESTAMP (6)WITH TIME ZONE, "BUILD_SCRIPT" CLOB, "BUILD_TYPE" VARCHAR2(22 BYTE), "COMMAND_DEPTH" NUMBER(2,0), "BUILD_SUB_OBJECT" VARCHAR2(30 BYTE), "REFRESH_METHOD" VARCHAR2(1 BYTE), "SEQ_NUMBER" NUMBER, "COMMAND_NUMBER" NUMBER, "IN_BRANCH" NUMBER(1,0), "COMMAND_STATUS_NUMBER" NUMBER, "BUILD_NAME" VARCHAR2(100 BYTE) ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "OUTPUT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) LOB ( "BUILD_SCRIPT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00013$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00007$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE DIMENSION COMPILE CREATE TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE" ( "ID" NUMBER, "SEQ_NUMBER" NUMBER, "ERROR#" NUMBER(8,0) NOT NULL ENABLE, "ERROR_MESSAGE" VARCHAR2(2000 BYTE), "DIMENSION" VARCHAR2(100 BYTE), "DIMENSION_MEMBER" VARCHAR2(100 BYTE), "MEMBER_ANCESTOR" VARCHAR2(100 BYTE), "HIERARCHY1" VARCHAR2(100 BYTE), "HIERARCHY2" VARCHAR2(100 BYTE), "ERROR_CONTEXT" CLOB ) SEGMENT CREATION DEFERRED PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING TABLESPACE "ATTRIBDW_DATA" LOB ( "ERROR_CONTEXT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR#"IS 'Error number being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_MESSAGE"IS 'Error text being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION"IS 'Name of dimension being compiled'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION_MEMBER"IS 'Problem dimension member'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."MEMBER_ANCESTOR"IS 'Problem dimension member''s parent'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY1"IS 'First hierarchy involved in error'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY2"IS 'Second hierarchy involved in error'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_CONTEXT"IS 'Extra information for error'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"IS 'Cube dimension compile log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407307C00010$$" ON "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE( INITIAL 1048576 NEXT 1048576 MAXEXTENTS 2147483645) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE OPERATING LOG CREATE TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG" ( "INST_ID" NUMBER NOT NULL ENABLE, "SID" NUMBER NOT NULL ENABLE, "SERIAL#" NUMBER NOT NULL ENABLE, "USER#" NUMBER NOT NULL ENABLE, "SQL_ID" VARCHAR2(13 BYTE), "JOB" NUMBER, "ID" NUMBER, "PARENT_ID" NUMBER, "SEQ_NUMBER" NUMBER, "TIME" TIMESTAMP (6)WITH TIME ZONE NOT NULL ENABLE, "LOG_LEVEL" NUMBER(4,0) NOT NULL ENABLE, "DEPTH" NUMBER(4,0), "OPERATION" VARCHAR2(15 BYTE) NOT NULL ENABLE, "SUBOPERATION" VARCHAR2(20 BYTE), "STATUS" VARCHAR2(10 BYTE) NOT NULL ENABLE, "NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE, "VALUE" VARCHAR2(4000 BYTE), "DETAILS" CLOB ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "DETAILS" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."INST_ID"IS 'Instance ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SID"IS 'Session ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SERIAL#"IS 'Session serial#'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."USER#"IS 'User ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SQL_ID"IS 'Executing SQL statement ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."JOB"IS 'Identifier of job'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."PARENT_ID"IS 'Parent operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."TIME"IS 'Time of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."LOG_LEVEL"IS 'Verbosity level of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DEPTH"IS 'Nesting depth of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."OPERATION"IS 'Current operation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SUBOPERATION"IS 'Current suboperation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."STATUS"IS 'Status of current operation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."NAME"IS 'Name of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."VALUE"IS 'Value of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DETAILS"IS 'Extra information for record'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"IS 'Cube operations log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407301C00018$$" ON "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE REJECTED RECORDS CREATE TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS" ( "ID" NUMBER, "SEQ_NUMBER" NUMBER, "ERROR#" NUMBER(8,0) NOT NULL ENABLE, "ERROR_MESSAGE" VARCHAR2(2000 BYTE), "RECORD#" NUMBER(38,0), "SOURCE_ROW" ROWID, "REJECTED_RECORD" CLOB ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "REJECTED_RECORD" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR#"IS 'Error number being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR_MESSAGE"IS 'Error text being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."RECORD#"IS 'Rejected record number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SOURCE_ROW"IS 'Rejected record''s ROWID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."REJECTED_RECORD"IS 'Rejected record copy'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"IS 'Cube rejected records log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407304C00007$$" ON "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;

Read the article

How I can add JScroll bar to NavigableImagePanel which is an Image panel with an small navigation vi

- by Sarah Kho

Hi, I have the following NavigableImagePanel, it is under BSD license and I found it in the web. What I want to do with this panel is as follow: I want to add a JScrollPane to it in order to show images in their full size and let the users to re-center the image using the small navigation panel. Right now, the panel resize the images to fit them in the current panel size. I want it to load the image in its real size and let users to navigate to different parts of the image using the navigation panel. Source code for the panel: import java.awt.AWTEvent; import java.awt.BorderLayout; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GraphicsEnvironment; import java.awt.Image; import java.awt.Point; import java.awt.Rectangle; import java.awt.RenderingHints; import java.awt.Toolkit; import java.awt.event.ComponentAdapter; import java.awt.event.ComponentEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseMotionListener; import java.awt.event.MouseWheelEvent; import java.awt.event.MouseWheelListener; import java.awt.image.BufferedImage; import java.io.File; import java.io.IOException; import java.util.Arrays; import javax.imageio.ImageIO; import javax.swing.JFrame; import javax.swing.JOptionPane; import javax.swing.JPanel; import javax.swing.SwingUtilities; /** * @author pxt * */ public class NavigableImagePanel extends JPanel { /** * <p>Identifies a change to the zoom level.</p> */ public static final String ZOOM_LEVEL_CHANGED_PROPERTY = "zoomLevel"; /** * <p>Identifies a change to the zoom increment.</p> */ public static final String ZOOM_INCREMENT_CHANGED_PROPERTY = "zoomIncrement"; /** * <p>Identifies that the image in the panel has changed.</p> */ public static final String IMAGE_CHANGED_PROPERTY = "image"; private static final double SCREEN_NAV_IMAGE_FACTOR = 0.15; // 15% of panel's width private static final double NAV_IMAGE_FACTOR = 0.3; // 30% of panel's width private static final double HIGH_QUALITY_RENDERING_SCALE_THRESHOLD = 1.0; private static final Object INTERPOLATION_TYPE = RenderingHints.VALUE_INTERPOLATION_BILINEAR; private double zoomIncrement = 0.2; private double zoomFactor = 1.0 + zoomIncrement; private double navZoomFactor = 1.0 + zoomIncrement; private BufferedImage image; private BufferedImage navigationImage; private int navImageWidth; private int navImageHeight; private double initialScale = 0.0; private double scale = 0.0; private double navScale = 0.0; private int originX = 0; private int originY = 0; private Point mousePosition; private Dimension previousPanelSize; private boolean navigationImageEnabled = true; private boolean highQualityRenderingEnabled = true; private WheelZoomDevice wheelZoomDevice = null; private ButtonZoomDevice buttonZoomDevice = null; /** * <p>Defines zoom devices.</p> */ public static class ZoomDevice { /** * <p>Identifies that the panel does not implement zooming, * but the component using the panel does (programmatic zooming method).</p> */ public static final ZoomDevice NONE = new ZoomDevice("none"); /** * <p>Identifies the left and right mouse buttons as the zooming device.</p> */ public static final ZoomDevice MOUSE_BUTTON = new ZoomDevice("mouseButton"); /** * <p>Identifies the mouse scroll wheel as the zooming device.</p> */ public static final ZoomDevice MOUSE_WHEEL = new ZoomDevice("mouseWheel"); private String zoomDevice; private ZoomDevice(String zoomDevice) { this.zoomDevice = zoomDevice; } public String toString() { return zoomDevice; } } //This class is required for high precision image coordinates translation. private class Coords { public double x; public double y; public Coords(double x, double y) { this.x = x; this.y = y; } public int getIntX() { return (int)Math.round(x); } public int getIntY() { return (int)Math.round(y); } public String toString() { return "[Coords: x=" + x + ",y=" + y + "]"; } } private class WheelZoomDevice implements MouseWheelListener { public void mouseWheelMoved(MouseWheelEvent e) { Point p = e.getPoint(); boolean zoomIn = (e.getWheelRotation() < 0); if (isInNavigationImage(p)) { if (zoomIn) { navZoomFactor = 1.0 + zoomIncrement; } else { navZoomFactor = 1.0 - zoomIncrement; } zoomNavigationImage(); } else if (isInImage(p)) { if (zoomIn) { zoomFactor = 1.0 + zoomIncrement; } else { zoomFactor = 1.0 - zoomIncrement; } zoomImage(); } } } private class ButtonZoomDevice extends MouseAdapter { public void mouseClicked(MouseEvent e) { Point p = e.getPoint(); if (SwingUtilities.isRightMouseButton(e)) { if (isInNavigationImage(p)) { navZoomFactor = 1.0 - zoomIncrement; zoomNavigationImage(); } else if (isInImage(p)) { zoomFactor = 1.0 - zoomIncrement; zoomImage(); } } else { if (isInNavigationImage(p)) { navZoomFactor = 1.0 + zoomIncrement; zoomNavigationImage(); } else if (isInImage(p)) { zoomFactor = 1.0 + zoomIncrement; zoomImage(); } } } } /** * <p>Creates a new navigable image panel with no default image and * the mouse scroll wheel as the zooming device.</p> */ public NavigableImagePanel() { setOpaque(false); addComponentListener(new ComponentAdapter() { public void componentResized(ComponentEvent e) { if (scale > 0.0) { if (isFullImageInPanel()) { centerImage(); } else if (isImageEdgeInPanel()) { scaleOrigin(); } if (isNavigationImageEnabled()) { createNavigationImage(); } repaint(); } previousPanelSize = getSize(); } }); addMouseListener(new MouseAdapter() { public void mousePressed(MouseEvent e) { if (SwingUtilities.isLeftMouseButton(e)) { if (isInNavigationImage(e.getPoint())) { Point p = e.getPoint(); displayImageAt(p); } } } public void mouseClicked(MouseEvent e){ if (e.getClickCount() == 2) { resetImage(); } } }); addMouseMotionListener(new MouseMotionListener() { public void mouseDragged(MouseEvent e) { if (SwingUtilities.isLeftMouseButton(e) && !isInNavigationImage(e.getPoint())) { Point p = e.getPoint(); moveImage(p); } } public void mouseMoved(MouseEvent e) { //we need the mouse position so that after zooming //that position of the image is maintained mousePosition = e.getPoint(); } }); setZoomDevice(ZoomDevice.MOUSE_WHEEL); } /** * <p>Creates a new navigable image panel with the specified image * and the mouse scroll wheel as the zooming device.</p> */ public NavigableImagePanel(BufferedImage image) throws IOException { this(); setImage(image); } private void addWheelZoomDevice() { if (wheelZoomDevice == null) { wheelZoomDevice = new WheelZoomDevice(); addMouseWheelListener(wheelZoomDevice); } } private void addButtonZoomDevice() { if (buttonZoomDevice == null) { buttonZoomDevice = new ButtonZoomDevice(); addMouseListener(buttonZoomDevice); } } private void removeWheelZoomDevice() { if (wheelZoomDevice != null) { removeMouseWheelListener(wheelZoomDevice); wheelZoomDevice = null; } } private void removeButtonZoomDevice() { if (buttonZoomDevice != null) { removeMouseListener(buttonZoomDevice); buttonZoomDevice = null; } } /** * <p>Sets a new zoom device.</p> * * @param newZoomDevice specifies the type of a new zoom device. */ public void setZoomDevice(ZoomDevice newZoomDevice) { if (newZoomDevice == ZoomDevice.NONE) { removeWheelZoomDevice(); removeButtonZoomDevice(); } else if (newZoomDevice == ZoomDevice.MOUSE_BUTTON) { removeWheelZoomDevice(); addButtonZoomDevice(); } else if (newZoomDevice == ZoomDevice.MOUSE_WHEEL) { removeButtonZoomDevice(); addWheelZoomDevice(); } } /** * <p>Gets the current zoom device.</p> */ public ZoomDevice getZoomDevice() { if (buttonZoomDevice != null) { return ZoomDevice.MOUSE_BUTTON; } else if (wheelZoomDevice != null) { return ZoomDevice.MOUSE_WHEEL; } else { return ZoomDevice.NONE; } } //Called from paintComponent() when a new image is set. private void initializeParams() { double xScale = (double)getWidth() / image.getWidth(); double yScale = (double)getHeight() / image.getHeight(); initialScale = Math.min(xScale, yScale); scale = initialScale; //An image is initially centered centerImage(); if (isNavigationImageEnabled()) { createNavigationImage(); } } //Centers the current image in the panel. private void centerImage() { originX = (int)(getWidth() - getScreenImageWidth()) / 2; originY = (int)(getHeight() - getScreenImageHeight()) / 2; } //Creates and renders the navigation image in the upper let corner of the panel. private void createNavigationImage() { //We keep the original navigation image larger than initially //displayed to allow for zooming into it without pixellation effect. navImageWidth = (int)(getWidth() * NAV_IMAGE_FACTOR); navImageHeight = navImageWidth * image.getHeight() / image.getWidth(); int scrNavImageWidth = (int)(getWidth() * SCREEN_NAV_IMAGE_FACTOR); int scrNavImageHeight = scrNavImageWidth * image.getHeight() / image.getWidth(); navScale = (double)scrNavImageWidth / navImageWidth; navigationImage = new BufferedImage(navImageWidth, navImageHeight, image.getType()); Graphics g = navigationImage.getGraphics(); g.drawImage(image, 0, 0, navImageWidth, navImageHeight, null); } /** * <p>Sets an image for display in the panel.</p> * * @param image an image to be set in the panel */ public void setImage(BufferedImage image) { BufferedImage oldImage = this.image; this.image = image; //Reset scale so that initializeParameters() is called in paintComponent() //for the new image. scale = 0.0; firePropertyChange(IMAGE_CHANGED_PROPERTY, (Image)oldImage, (Image)image); repaint(); } /** * <p>resets an image to the centre of the panel</p> * */ public void resetImage() { BufferedImage oldImage = this.image; this.image = image; //Reset scale so that initializeParameters() is called in paintComponent() //for the new image. scale = 0.0; firePropertyChange(IMAGE_CHANGED_PROPERTY, (Image)oldImage, (Image)image); repaint(); } /** * <p>Tests whether an image uses the standard RGB color space.</p> */ public static boolean isStandardRGBImage(BufferedImage bImage) { return bImage.getColorModel().getColorSpace().isCS_sRGB(); } //Converts this panel's coordinates into the original image coordinates private Coords panelToImageCoords(Point p) { return new Coords((p.x - originX) / scale, (p.y - originY) / scale); } //Converts the original image coordinates into this panel's coordinates private Coords imageToPanelCoords(Coords p) { return new Coords((p.x * scale) + originX, (p.y * scale) + originY); } //Converts the navigation image coordinates into the zoomed image coordinates private Point navToZoomedImageCoords(Point p) { int x = p.x * getScreenImageWidth() / getScreenNavImageWidth(); int y = p.y * getScreenImageHeight() / getScreenNavImageHeight(); return new Point(x, y); } //The user clicked within the navigation image and this part of the image //is displayed in the panel. //The clicked point of the image is centered in the panel. private void displayImageAt(Point p) { Point scrImagePoint = navToZoomedImageCoords(p); originX = -(scrImagePoint.x - getWidth() / 2); originY = -(scrImagePoint.y - getHeight() / 2); repaint(); } //Tests whether a given point in the panel falls within the image boundaries. private boolean isInImage(Point p) { Coords coords = panelToImageCoords(p); int x = coords.getIntX(); int y = coords.getIntY(); return (x >= 0 && x < image.getWidth() && y >= 0 && y < image.getHeight()); } //Tests whether a given point in the panel falls within the navigation image //boundaries. private boolean isInNavigationImage(Point p) { return (isNavigationImageEnabled() && p.x < getScreenNavImageWidth() && p.y < getScreenNavImageHeight()); } //Used when the image is resized. private boolean isImageEdgeInPanel() { if (previousPanelSize == null) { return false; } return (originX > 0 && originX < previousPanelSize.width || originY > 0 && originY < previousPanelSize.height); } //Tests whether the image is displayed in its entirety in the panel. private boolean isFullImageInPanel() { return (originX >= 0 && (originX + getScreenImageWidth()) < getWidth() && originY >= 0 && (originY + getScreenImageHeight()) < getHeight()); } /** * <p>Indicates whether the high quality rendering feature is enabled.</p> * * @return true if high quality rendering is enabled, false otherwise. */ public boolean isHighQualityRenderingEnabled() { return highQualityRenderingEnabled; } /** * <p>Enables/disables high quality rendering.</p> * * @param enabled enables/disables high quality rendering */ public void setHighQualityRenderingEnabled(boolean enabled) { highQualityRenderingEnabled = enabled; } //High quality rendering kicks in when when a scaled image is larger //than the original image. In other words, //when image decimation stops and interpolation starts. private boolean isHighQualityRendering() { return (highQualityRenderingEnabled && scale > HIGH_QUALITY_RENDERING_SCALE_THRESHOLD); } /** * <p>Indicates whether navigation image is enabled.<p> * * @return true when navigation image is enabled, false otherwise. */ public boolean isNavigationImageEnabled() { return navigationImageEnabled; } /** * <p>Enables/disables navigation with the navigation image.</p> * <p>Navigation image should be disabled when custom, programmatic navigation * is implemented.</p> * * @param enabled true when navigation image is enabled, false otherwise. */ public void setNavigationImageEnabled(boolean enabled) { navigationImageEnabled = enabled; repaint(); } //Used when the panel is resized private void scaleOrigin() { originX = originX * getWidth() / previousPanelSize.width; originY = originY * getHeight() / previousPanelSize.height; repaint(); } //Converts the specified zoom level to scale. private double zoomToScale(double zoom) { return initialScale * zoom; } /** * <p>Gets the current zoom level.</p> * * @return the current zoom level */ public double getZoom() { return scale / initialScale; } /** * <p>Sets the zoom level used to display the image.</p> * <p>This method is used in programmatic zooming. The zooming center is * the point of the image closest to the center of the panel. * After a new zoom level is set the image is repainted.</p> * * @param newZoom the zoom level used to display this panel's image. */ public void setZoom(double newZoom) { Point zoomingCenter = new Point(getWidth() / 2, getHeight() / 2); setZoom(newZoom, zoomingCenter); } /** * <p>Sets the zoom level used to display the image, and the zooming center, * around which zooming is done.</p> * <p>This method is used in programmatic zooming. * After a new zoom level is set the image is repainted.</p> * * @param newZoom the zoom level used to display this panel's image. */ public void setZoom(double newZoom, Point zoomingCenter) { Coords imageP = panelToImageCoords(zoomingCenter); if (imageP.x < 0.0) { imageP.x = 0.0; } if (imageP.y < 0.0) { imageP.y = 0.0; } if (imageP.x >= image.getWidth()) { imageP.x = image.getWidth() - 1.0; } if (imageP.y >= image.getHeight()) { imageP.y = image.getHeight() - 1.0; } Coords correctedP = imageToPanelCoords(imageP); double oldZoom = getZoom(); scale = zoomToScale(newZoom); Coords panelP = imageToPanelCoords(imageP); originX += (correctedP.getIntX() - (int)panelP.x); originY += (correctedP.getIntY() - (int)panelP.y); firePropertyChange(ZOOM_LEVEL_CHANGED_PROPERTY, new Double(oldZoom), new Double(getZoom())); repaint(); } /** * <p>Gets the current zoom increment.</p> * * @return the current zoom increment */ public double getZoomIncrement() { return zoomIncrement; } /** * <p>Sets a new zoom increment value.</p> * * @param newZoomIncrement new zoom increment value */ public void setZoomIncrement(double newZoomIncrement) { double oldZoomIncrement = zoomIncrement; zoomIncrement = newZoomIncrement; firePropertyChange(ZOOM_INCREMENT_CHANGED_PROPERTY, new Double(oldZoomIncrement), new Double(zoomIncrement)); } //Zooms an image in the panel by repainting it at the new zoom level. //The current mouse position is the zooming center. private void zoomImage() { Coords imageP = panelToImageCoords(mousePosition); double oldZoom = getZoom(); scale *= zoomFactor; Coords panelP = imageToPanelCoords(imageP); originX += (mousePosition.x - (int)panelP.x); originY += (mousePosition.y - (int)panelP.y); firePropertyChange(ZOOM_LEVEL_CHANGED_PROPERTY, new Double(oldZoom), new Double(getZoom())); repaint(); } //Zooms the navigation image private void zoomNavigationImage() { navScale *= navZoomFactor; repaint(); } /** * <p>Gets the image origin.</p> * <p>Image origin is defined as the upper, left corner of the image in * the panel's coordinate system.</p> * @return the point of the upper, left corner of the image in the panel's coordinates * system. */ public Point getImageOrigin() { return new Point(originX, originY); } /** * <p>Sets the image origin.</p> * <p>Image origin is defined as the upper, left corner of the image in * the panel's coordinate system. After a new origin is set, the image is repainted. * This method is used for programmatic image navigation.</p>

Read the article

JSF index out of bounds exception when submiting a form

- by selvin

When I click submit button in a JSF form the following exception occurs. It says an Indexout of bounds exception, but I did not use any ArrayList associated with the code. Is this a bug? what should i do to get rid of this error.. Mojarra: 2.0.2 FCS with primefaces 2.2 JSF: 2.0 NetBeans IDE 6.8 Glassfish Domain V3 Form Code: <p:panel id="jobres" style="min-width: 200px" header="Reservation" widgetVar="jres" closable="true" toggleable="true" > <h:form id="arj" prependId="false" style="width:550px;max-height:400px;overflow:auto;"> <p:tooltip global="true"/> <h:panelGrid columns="2" > <p:panel style="min-width: 220px"> <h:outputLabel value="1.Job type:"/> </p:panel> <h:panelGroup> <h:messages id="aerr"/> <h:selectOneMenu title="Choose a Jobtype" value="#{arjob.jobtype}"> <f:selectItem itemLabel="Sequential" itemValue="sequential"/> <f:selectItem itemLabel="Parallel" itemValue="parallel"/> </h:selectOneMenu> </h:panelGroup> <p:panel> <h:outputLabel value="2.Executable: *"/> </p:panel> <h:panelGroup> <p:fileUpload id="aexeupload" fileUploadListener="#{arjob.chooseListener}" auto="true" update="adlist :erdialog" description="Resource Files"> </p:fileUpload> <br/> <h:panelGroup id="aexelistwrapper"> <p:dataList var="fileList" type="ordered" id="adlist" value="#{arjob.fexelist}"> <p:column> #{fileList}  <p:commandLink ajax="true" update="aexelistwrapper" actionListener="#{arjob.removeExe(fileList)}"> <p:graphicImage value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGroup> </h:panelGroup> <p:panel> <h:outputLabel value="3.Argument(s):"/> </p:panel> <h:panelGroup> <u style="color:orange"> <i> <p:inplace emptyLabel="Add Arguments" onEditUpdate="aarglist"> <h:inputText title="Enter the arguments" id="aiparg" value="#{arjob.args}"> <f:ajax event="valueChange"/> </h:inputText> <p:commandButton update="aarglistwrapper erdialog" value="add" actionListener="#{arjob.addArg}"/> </p:inplace> </i> </u> </h:panelGroup> <h:panelGroup> </h:panelGroup> <h:panelGroup> <h:panelGrid id="aarglistwrapper"> <p:dataList id="aarglist" type="ordered" var="args" value="#{arjob.arglist}"> <p:column id="col2"> #{args}  <p:commandLink ajax="true" update="arj:arglistwrapper" actionListener="#{arjob.removeArgs(args)}"> <p:graphicImage title="remove" value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGrid> </h:panelGroup> <p:panel> <h:outputLabel value="4.InputFile(s): *"/> </p:panel> <h:panelGroup> <p:fileUpload id="ainpupload" fileUploadListener="#{arjob.inputChooseListener}" auto="true" update="aipfilelistwrapper :erdialog" description="Resource Files"> </p:fileUpload> <br/> <h:panelGroup id="aipfilelistwrapper"> <p:dataList var="ipfile" type="ordered" id="aipflist" value="#{arjob.finlist}"> <p:column> #{ipfile}  <p:commandLink ajax="true" update="aipfilelistwrapper" actionListener="#{arjob.removeInfile(ipfile)}"> <p:graphicImage value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGroup> </h:panelGroup> <h:panelGroup> <p:panel > 5)Output File(s): </p:panel> </h:panelGroup> <h:panelGroup> <u style="color:orange"> <i> <p:inplace emptyLabel="Add file name" id="aipexe"> <h:inputText title="Enter the output filenames" id="aexe" value="#{arjob.ofilename}"> <f:ajax event="valueChange"/> </h:inputText> <p:commandButton update="adoutlist :erdialog" value="add" actionListener="#{arjob.addOutfile}"/> </p:inplace> </i> </u> </h:panelGroup> <h:panelGroup> </h:panelGroup> <h:panelGroup> <h:panelGrid id="afilelistwrapper"> <p:dataList id="adoutlist" type="ordered" var="ofile" value="#{arjob.foutlist}"> <p:column id="acol"> #{ofile}  <p:commandLink ajax="true" update="afilelistwrapper" actionListener="#{arjob.removeOutfile(ofile)}"> <p:graphicImage value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGrid> </h:panelGroup> <p:panel> <h:outputLabel value="6) Operating System"/> </p:panel> <h:panelGroup> <h:selectOneMenu title="Select an OperatingSystem" value="#{arjob.os}"> <f:selectItem itemLabel="CentOS Release 5.2" itemValue="Cent OS 5.2"/> <f:selectItem itemLabel="RHEL Server Release 5" itemValue="RHEL server 5"/> <f:selectItem itemLabel="RHEL Server Release 5.2" itemValue="RHEL server 5.2"/> </h:selectOneMenu> </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="7) Physical Memory:"/> </p:panel> </h:panelGroup> <h:panelGroup> <p:spinner min="0" style="width: 100px" stepFactor="10" value="#{arjob.mem}"> </p:spinner>(MB) </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="8) Disk Space:"/> </p:panel> </h:panelGroup> <h:panelGroup> <p:spinner min="0" style="width: 100px" stepFactor="10" value="#{arjob.diskspace}"> </p:spinner>(MB) </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="9) CPU Mhz:"/> </p:panel> </h:panelGroup> <h:panelGroup> <p:spinner min="0" style="width: 100px" stepFactor="10" value="#{arjob.cpumhz}"> </p:spinner>(Mhz) </h:panelGroup> <p:panel> <h:outputLabel value="10) Start Time:"/> </p:panel> <h:panelGroup> <p:inputMask title="(YYYY-MM-DD HH:MM:SS)" mask="9999-99-99 99:99:99" value="#{arjob.startt}"> </p:inputMask> </h:panelGroup> <p:panel> <h:outputLabel value="11) End Time:"/> </p:panel> <h:panelGroup> <p:inputMask title="(YYYY-MM-DD HH:MM:SS)" mask="9999-99-99 99:99:99" value="#{arjob.endt}"> <p:ajax event="valueChange"/> </p:inputMask> </h:panelGroup> <p:panel> <h:outputLabel value="12) LRMS type"/> </p:panel> <h:panelGroup> <h:selectOneMenu value="#{arjob.lrms}"> <f:selectItem itemLabel="PBS" itemValue="PBS"/> <f:selectItem itemLabel="SGE" itemValue="SGE"/> </h:selectOneMenu> </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="13)Number of Nodes: *"/> </p:panel> </h:panelGroup> <h:panelGroup> <h:panelGroup> <p:spinner style="width: 100px" min="1" max="100" value="#{arjob.numnodes}"> </p:spinner> </h:panelGroup> </h:panelGroup> <h:panelGroup> </h:panelGroup> <h:panelGroup> <p:commandButton ajax="false" value="Submit" action="#{arjob.jobSubmitAction}"/> </h:panelGroup> </h:panelGrid> </h:form> <p:draggable for="jobres" handle=".ui-panel-titlebar"/> </p:panel> Exception: SEVERE: javax.faces.FacesException: Unexpected error restoring state for component with id j_idt7. Cause: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0. at com.sun.faces.application.view.StateManagementStrategyImpl$2.visit(StateManagementStrategyImpl.java:239) at com.sun.faces.component.visit.FullVisitContext.invokeVisitCallback(FullVisitContext.java:147) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1446) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1457) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1457) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1457) at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:223) at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177) at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:131) at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:430) at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143) at javax.faces.application.ViewHandlerWrapper.restoreView(ViewHandlerWrapper.java:288) at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199) at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101) at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312) at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1523) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:215) at org.primefaces.webapp.filter.FileUploadFilter.doFilter(FileUploadFilter.java:79) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:215) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:277) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:188) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:641) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:97) at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:85) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185) at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:332) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:233) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:165) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 at java.util.ArrayList.RangeCheck(ArrayList.java:547) at java.util.ArrayList.get(ArrayList.java:322) at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161) at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427) at com.sun.faces.application.view.StateManagementStrategyImpl$2.visit(StateManagementStrategyImpl.java:231) ... 45 more

Read the article

problem with sIFR 3 not displaying in IE just getting XXX

- by user288306

I am having a problem with sIFR 3 not displaying in IE. I get 3 larges black XXX in IE yet it displays fine in Firefox. I have checked i do have the most recent version of flash installed correctly. Here is the code on the page <div id="features"> <div id="mainmessage_advertisers"><h2>Advertisers</h2><br /><br /><h3><a href="">Reach your customers where they browse. Buy directly from top web publishers.</a></h3><br /><br /><br /><a href=""><img src="img/buyads.gif" border="0"></a></div> <div id="mainmessage_publishers"><h2>Publishers</h2><br /><br /><h3>Take control of your ad space and start generating more revenue than <u>ever before</u>.</h3><br /><br /><br /><a href=""><img src="img/sellads.gif" border="0"></a></div> </div>` Here is the code from my global.css #mainmessage_advertisers { width: 395px; height: 200px; padding: 90px 50px; border: 1px; float: left; } #mainmessage_publishers { width: 395px; height: 200px; padding: 90px 50px; float: right; } and here is what i have in my sifr.js /*********************************************************************** SIFR 3.0 (BETA 1) FUNCTIONS ************************************************************************/ var parseSelector=(function(){var _1=/\s*,\s*/;var _2=/\s*([\s>+~(),]|^|$)\s*/g;var _3=/([\s>+~,]|[^(]\+|^)([#.:@])/g;var _4=/^[^\s>+~]/;var _5=/[\s#.:>+~()@]|[^\s#.:>+~()@]+/g;function parseSelector(_6,_7){_7=_7||document.documentElement;var _8=_6.split(_1),_9=[];for(var i=0;i<_8.length;i++){var _b=[_7],_c=toStream(_8[i]);for(var j=0;j<_c.length;){var _e=_c[j++],_f=_c[j++],_10="";if(_c[j]=="("){while(_c[j++]!=")"&&j<_c.length){_10+=_c[j]}_10=_10.slice(0,-1)}_b=select(_b,_e,_f,_10)}_9=_9.concat(_b)}return _9}function toStream(_11){var _12=_11.replace(_2,"$1").replace(_3,"$1*$2");if(_4.test(_12)){_12=" "+_12}return _12.match(_5)||[]}function select(_13,_14,_15,_16){return (_17[_14])?_17[_14](_13,_15,_16):[]}var _18={toArray:function(_19){var a=[];for(var i=0;i<_19.length;i++){a.push(_19[i])}return a}};var dom={isTag:function(_1d,tag){return (tag=="*")||(tag.toLowerCase()==_1d.nodeName.toLowerCase())},previousSiblingElement:function(_1f){do{_1f=_1f.previousSibling}while(_1f&&_1f.nodeType!=1);return _1f},nextSiblingElement:function(_20){do{_20=_20.nextSibling}while(_20&&_20.nodeType!=1);return _20},hasClass:function(_21,_22){return (_22.className||"").match("(^|\\s)"+_21+"(\\s|$)")},getByTag:function(tag,_24){return _24.getElementsByTagName(tag)}};var _17={"#":function(_25,_26){for(var i=0;i<_25.length;i++){if(_25[i].getAttribute("id")==_26){return [_25[i]]}}return []}," ":function(_28,_29){var _2a=[];for(var i=0;i<_28.length;i++){_2a=_2a.concat(_18.toArray(dom.getByTag(_29,_28[i])))}return _2a},">":function(_2c,_2d){var _2e=[];for(var i=0,_30;i<_2c.length;i++){_30=_2c[i];for(var j=0,_32;j<_30.childNodes.length;j++){_32=_30.childNodes[j];if(_32.nodeType==1&&dom.isTag(_32,_2d)){_2e.push(_32)}}}return _2e},".":function(_33,_34){var _35=[];for(var i=0,_37;i<_33.length;i++){_37=_33[i];if(dom.hasClass([_34],_37)){_35.push(_37)}}return _35},":":function(_38,_39,_3a){return (pseudoClasses[_39])?pseudoClasses[_39](_38,_3a):[]}};parseSelector.selectors=_17;parseSelector.pseudoClasses={};parseSelector.util=_18;parseSelector.dom=dom;return parseSelector})(); var sIFR=new function(){var _3b=this;var _3c="sIFR-active";var _3d="sIFR-replaced";var _3e="sIFR-flash";var _3f="sIFR-ignore";var _40="sIFR-alternate";var _41="sIFR-class";var _42="sIFR-layout";var _43="http://www.w3.org/1999/xhtml";var _44=6;var _45=126;var _46=8;var _47="SIFR-PREFETCHED";var _48=" ";this.isActive=false;this.isEnabled=true;this.hideElements=true;this.replaceNonDisplayed=false;this.preserveSingleWhitespace=false;this.fixWrap=true;this.registerEvents=true;this.setPrefetchCookie=true;this.cookiePath="/";this.domains=[];this.fromLocal=true;this.forceClear=false;this.forceWidth=true;this.fitExactly=false;this.forceTextTransform=true;this.useDomContentLoaded=true;this.debugMode=false;this.hasFlashClassSet=false;var _49=0;var _4a=false,_4b=false;var dom=new function(){this.getBody=function(){var _4d=document.getElementsByTagName("body");if(_4d.length==1){return _4d[0]}return null};this.addClass=function(_4e,_4f){if(_4f){_4f.className=((_4f.className||"")==""?"":_4f.className+" ")+_4e}};this.removeClass=function(_50,_51){if(_51){_51.className=_51.className.replace(new RegExp("(^|\\s)"+_50+"(\\s|$)"),"").replace(/^\s+|(\s)\s+/g,"$1")}};this.hasClass=function(_52,_53){return new RegExp("(^|\\s)"+_52+"(\\s|$)").test(_53.className)};this.create=function(_54){if(document.createElementNS){return document.createElementNS(_43,_54)}return document.createElement(_54)};this.setInnerHtml=function(_55,_56){if(ua.innerHtmlSupport){_55.innerHTML=_56}else{if(ua.xhtmlSupport){_56=["<root xmlns=\"",_43,"\">",_56,"</root>"].join("");var xml=(new DOMParser()).parseFromString(_56,"text/xml");xml=document.importNode(xml.documentElement,true);while(_55.firstChild){_55.removeChild(_55.firstChild)}while(xml.firstChild){_55.appendChild(xml.firstChild)}}}};this.getComputedStyle=function(_58,_59){var _5a;if(document.defaultView&&document.defaultView.getComputedStyle){_5a=document.defaultView.getComputedStyle(_58,null)[_59]}else{if(_58.currentStyle){_5a=_58.currentStyle[_59]}}return _5a||""};this.getStyleAsInt=function(_5b,_5c,_5d){var _5e=this.getComputedStyle(_5b,_5c);if(_5d&&!/px$/.test(_5e)){return 0}_5e=parseInt(_5e);return isNaN(_5e)?0:_5e};this.getZoom=function(){return _5f.zoom.getLatest()}};this.dom=dom;var ua=new function(){var ua=navigator.userAgent.toLowerCase();var _62=(navigator.product||"").toLowerCase();this.macintosh=ua.indexOf("mac")>-1;this.windows=ua.indexOf("windows")>-1;this.quicktime=false;this.opera=ua.indexOf("opera")>-1;this.konqueror=_62.indexOf("konqueror")>-1;this.ie=false/*@cc_on || true @*/;this.ieSupported=this.ie&&!/ppc|smartphone|iemobile|msie\s5\.5/.test(ua)/*@cc_on && @_jscript_version >= 5.5 @*/;this.ieWin=this.ie&&this.windows/*@cc_on && @_jscript_version >= 5.1 @*/;this.windows=this.windows&&(!this.ie||this.ieWin);this.ieMac=this.ie&&this.macintosh/*@cc_on && @_jscript_version < 5.1 @*/;this.macintosh=this.macintosh&&(!this.ie||this.ieMac);this.safari=ua.indexOf("safari")>-1;this.webkit=ua.indexOf("applewebkit")>-1&&!this.konqueror;this.khtml=this.webkit||this.konqueror;this.gecko=!this.webkit&&_62=="gecko";this.operaVersion=this.opera&&/.*opera(\s|\/)(\d+\.\d+)/.exec(ua)?parseInt(RegExp.$2):0;this.webkitVersion=this.webkit&&/.*applewebkit\/(\d+).*/.exec(ua)?parseInt(RegExp.$1):0;this.geckoBuildDate=this.gecko&&/.*gecko\/(\d{8}).*/.exec(ua)?parseInt(RegExp.$1):0;this.konquerorVersion=this.konqueror&&/.*konqueror\/(\d\.\d).*/.exec(ua)?parseInt(RegExp.$1):0;this.flashVersion=0;if(this.ieWin){var axo;var _64=false;try{axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash.7")}catch(e){try{axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash.6");this.flashVersion=6;axo.AllowScriptAccess="always"}catch(e){_64=this.flashVersion==6}if(!_64){try{axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash")}catch(e){}}}if(!_64&&axo){this.flashVersion=parseFloat(/([\d,?]+)/.exec(axo.GetVariable("$version"))[1].replace(/,/g,"."))}}else{if(navigator.plugins&&navigator.plugins["Shockwave Flash"]){var _65=navigator.plugins["Shockwave Flash"];this.flashVersion=parseFloat(/(\d+\.?\d*)/.exec(_65.description)[1]);var i=0;while(this.flashVersion>=_46&&i<navigator.mimeTypes.length){var _67=navigator.mimeTypes[i];if(_67.type=="application/x-shockwave-flash"&&_67.enabledPlugin.description.toLowerCase().indexOf("quicktime")>-1){this.flashVersion=0;this.quicktime=true}i++}}}this.flash=this.flashVersion>=_46;this.transparencySupport=this.macintosh||this.windows;this.computedStyleSupport=this.ie||document.defaultView&&document.defaultView.getComputedStyle&&(!this.gecko||this.geckoBuildDate>=20030624);this.css=true;if(this.computedStyleSupport){try{var _68=document.getElementsByTagName("head")[0];_68.style.backgroundColor="#FF0000";var _69=dom.getComputedStyle(_68,"backgroundColor");this.css=!_69||/\#F{2}0{4}|rgb$255,\s?0,\s?0$/i.test(_69);_68=null}catch(e){}}this.xhtmlSupport=!!window.DOMParser&&!!document.importNode;this.innerHtmlSupport;try{var n=dom.create("span");if(!this.ieMac){n.innerHTML="x"}this.innerHtmlSupport=n.innerHTML=="x"}catch(e){this.innerHtmlSupport=false}this.zoomSupport=!!(this.opera&&document.documentElement);this.geckoXml=this.gecko&&(document.contentType||"").indexOf("xml")>-1;this.requiresPrefetch=this.ieWin||this.khtml;this.verifiedKonqueror=false;this.supported=this.flash&&this.css&&(!this.ie||this.ieSupported)&&(!this.opera||this.operaVersion>=8)&&(!this.webkit||this.webkitVersion>=412)&&(!this.konqueror||this.konquerorVersion>3.5)&&this.computedStyleSupport&&(this.innerHtmlSupport||!this.khtml&&this.xhtmlSupport)};this.ua=ua;var _6b=new function(){function capitalize($){return $.toUpperCase()}this.normalize=function(str){if(_3b.preserveSingleWhitespace){return str.replace(/\s/g,_48)}return str.replace(/(\s)\s+/g,"$1")};this.textTransform=function(_6e,str){switch(_6e){case "uppercase":str=str.toUpperCase();break;case "lowercase":str=str.toLowerCase();break;case "capitalize":var _70=str;str=str.replace(/^\w|\s\w/g,capitalize);if(str.indexOf("function capitalize")!=-1){var _71=_70.replace(/(^|\s)(\w)/g,"$1$1$2$2").split(/^\w|\s\w/g);str="";for(var i=0;i<_71.length;i++){str+=_71[i].charAt(0).toUpperCase()+_71[i].substring(1)}}break}return str};this.toHexString=function(str){if(typeof (str)!="string"||!str.charAt(0)=="#"||str.length!=4&&str.length!=7){return str}str=str.replace(/#/,"");if(str.length==3){str=str.replace(/(.)(.)(.)/,"$1$1$2$2$3$3")}return "0x"+str};this.toJson=function(obj){var _75="";switch(typeof (obj)){case "string":_75="\""+obj+"\"";break;case "number":case "boolean":_75=obj.toString();break;case "object":_75=[];for(var _76 in obj){if(obj[_76]==Object.prototype[_76]){continue}_75.push("\""+_76+"\":"+_6b.toJson(obj[_76]))}_75="{"+_75.join(",")+"}";break}return _75};this.convertCssArg=function(arg){if(!arg){return {}}if(typeof (arg)=="object"){if(arg.constructor==Array){arg=arg.join("")}else{return arg}}var obj={};var _79=arg.split("}");for(var i=0;i<_79.length;i++){var $=_79[i].match(/([^\s{]+)\s*\{(.+)\s*;?\s*/);if(!$||$.length!=3){continue}if(!obj[$[1]]){obj[$[1]]={}}var _7c=$[2].split(";");for(var j=0;j<_7c.length;j++){var $2=_7c[j].match(/\s*([^:\s]+)\s*\:\s*([^\s;]+)/);if(!$2||$2.length!=3){continue}obj[$[1]][$2[1]]=$2[2]}}return obj};this.extractFromCss=function(css,_80,_81,_82){var _83=null;if(css&&css[_80]&&css[_80][_81]){_83=css[_80][_81];if(_82){delete css[_80][_81]}}return _83};this.cssToString=function(arg){var css=[];for(var _86 in arg){var _87=arg[_86];if(_87==Object.prototype[_86]){continue}css.push(_86,"{");for(var _88 in _87){if(_87[_88]==Object.prototype[_88]){continue}css.push(_88,":",_87[_88],";")}css.push("}")}return escape(css.join(""))}};this.util=_6b;var _5f={};_5f.fragmentIdentifier=new function(){this.fix=true;var _89;this.cache=function(){_89=document.title};function doFix(){document.title=_89}this.restore=function(){if(this.fix){setTimeout(doFix,0)}}};_5f.synchronizer=new function(){this.isBlocked=false;this.block=function(){this.isBlocked=true};this.unblock=function(){this.isBlocked=false;_8a.replaceAll()}};_5f.zoom=new function(){var _8b=100;this.getLatest=function(){return _8b};if(ua.zoomSupport&&ua.opera){var _8c=document.createElement("div");_8c.style.position="fixed";_8c.style.left="-65536px";_8c.style.top="0";_8c.style.height="100%";_8c.style.width="1px";_8c.style.zIndex="-32";document.documentElement.appendChild(_8c);function updateZoom(){if(!_8c){return}var _8d=window.innerHeight/_8c.offsetHeight;var _8e=Math.round(_8d*100)%10;if(_8e>5){_8d=Math.round(_8d*100)+10-_8e}else{_8d=Math.round(_8d*100)-_8e}_8b=isNaN(_8d)?100:_8d;_5f.synchronizer.unblock();document.documentElement.removeChild(_8c);_8c=null}_5f.synchronizer.block();setTimeout(updateZoom,54)}};this.hacks=_5f;var _8f={kwargs:[],replaceAll:function(){for(var i=0;i<this.kwargs.length;i++){_3b.replace(this.kwargs[i])}this.kwargs=[]}};var _8a={kwargs:[],replaceAll:_8f.replaceAll};function isValidDomain(){if(_3b.domains.length==0){return true}var _91="";try{_91=document.domain}catch(e){}if(_3b.fromLocal&&sIFR.domains[0]!="localhost"){sIFR.domains.unshift("localhost")}for(var i=0;i<_3b.domains.length;i++){if(_3b.domains[i]=="*"||_3b.domains[i]==_91){return true}}return false}this.activate=function(){if(!ua.supported||!this.isEnabled||this.isActive||!isValidDomain()){return}this.isActive=true;if(this.hideElements){this.setFlashClass()}if(ua.ieWin&&_5f.fragmentIdentifier.fix&&window.location.hash!=""){_5f.fragmentIdentifier.cache()}else{_5f.fragmentIdentifier.fix=false}if(!this.registerEvents){return}function handler(evt){_3b.initialize();if(evt&&evt.type=="load"){if(document.removeEventListener){document.removeEventListener("DOMContentLoaded",handler,false);document.removeEventListener("load",handler,false)}if(window.removeEventListener){window.removeEventListener("load",handler,false)}}}if(window.addEventListener){if(_3b.useDomContentLoaded&&ua.gecko){document.addEventListener("DOMContentLoaded",handler,false)}window.addEventListener("load",handler,false)}else{if(ua.ieWin){if(_3b.useDomContentLoaded&&!_4a){document.write("<scr"+"ipt id=__sifr_ie_onload defer src=//:></script>");document.getElementById("__sifr_ie_onload").onreadystatechange=function(){if(this.readyState=="complete"){handler();this.removeNode()}}}window.attachEvent("onload",handler)}}};this.setFlashClass=function(){if(this.hasFlashClassSet){return}dom.addClass(_3c,dom.getBody()||document.documentElement);this.hasFlashClassSet=true};this.removeFlashClass=function(){if(!this.hasFlashClassSet){return}dom.removeClass(_3c,dom.getBody());dom.removeClass(_3c,document.documentElement);this.hasFlashClassSet=false};this.initialize=function(){if(_4b||!this.isActive||!this.isEnabled){return}_4b=true;_8f.replaceAll();clearPrefetch()};function getSource(src){if(typeof (src)!="string"){if(src.src){src=src.src}if(typeof (src)!="string"){var _95=[];for(var _96 in src){if(src[_96]!=Object.prototype[_96]){_95.push(_96)}}_95.sort().reverse();var _97="";var i=-1;while(!_97&&++i<_95.length){if(parseFloat(_95[i])<=ua.flashVersion){_97=src[_95[i]]}}src=_97}}if(!src&&_3b.debugMode){throw new Error("sIFR: Could not determine appropriate source")}if(ua.ie&&src.charAt(0)=="/"){src=window.location.toString().replace(/([^:]+)(:\/?\/?)([^\/]+).*/,"$1$2$3")+src}return src}this.prefetch=function(){if(!ua.requiresPrefetch||!ua.supported||!this.isEnabled||!isValidDomain()){return}if(this.setPrefetchCookie&&new RegExp(";?"+_47+"=true;?").test(document.cookie)){return}try{_4a=true;if(ua.ieWin){prefetchIexplore(arguments)}else{prefetchLight(arguments)}if(this.setPrefetchCookie){document.cookie=_47+"=true;path="+this.cookiePath}}catch(e){if(_3b.debugMode){throw e}}};function prefetchIexplore(_99){for(var i=0;i<_99.length;i++){document.write("<embed src=\""+getSource(_99[i])+"\" sIFR-prefetch=\"true\" style=\"display:none;\">")}}function prefetchLight(_9b){for(var i=0;i<_9b.length;i++){new Image().src=getSource(_9b[i])}}function clearPrefetch(){if(!ua.ieWin||!_4a){return}try{var _9d=document.getElementsByTagName("embed");for(var i=_9d.length-1;i>=0;i--){var _9f=_9d[i];if(_9f.getAttribute("sIFR-prefetch")=="true"){_9f.parentNode.removeChild(_9f)}}}catch(e){}}function getRatio(_a0){if(_a0<=10){return 1.55}if(_a0<=19){return 1.45}if(_a0<=32){return 1.35}if(_a0<=71){return 1.3}return 1.25}function getFilters(obj){var _a2=[];for(var _a3 in obj){if(obj[_a3]==Object.prototype[_a3]){continue}var _a4=obj[_a3];_a3=[_a3.replace(/filter/i,"")+"Filter"];for(var _a5 in _a4){if(_a4[_a5]==Object.prototype[_a5]){continue}_a3.push(_a5+":"+escape(_6b.toJson(_6b.toHexString(_a4[_a5]))))}_a2.push(_a3.join(","))}return _a2.join(";")}this.replace=function(_a6,_a7){if(!ua.supported){return}if(_a7){for(var _a8 in _a6){if(typeof (_a7[_a8])=="undefined"){_a7[_a8]=_a6[_a8]}}_a6=_a7}if(!_4b){return _8f.kwargs.push(_a6)}if(_5f.synchronizer.isBlocked){return _8a.kwargs.push(_a6)}var _a9=_a6.elements;if(!_a9&&parseSelector){_a9=parseSelector(_a6.selector)}if(_a9.length==0){return}this.setFlashClass();var src=getSource(_a6.src);var css=_6b.convertCssArg(_a6.css);var _ac=getFilters(_a6.filters);var _ad=(_a6.forceClear==null)?_3b.forceClear:_a6.forceClear;var _ae=(_a6.fitExactly==null)?_3b.fitExactly:_a6.fitExactly;var _af=_ae||(_a6.forceWidth==null?_3b.forceWidth:_a6.forceWidth);var _b0=parseInt(_6b.extractFromCss(css,".sIFR-root","leading"))||0;var _b1=_6b.extractFromCss(css,".sIFR-root","background-color",true)||"#FFFFFF";var _b2=_6b.extractFromCss(css,".sIFR-root","opacity",true)||"100";if(parseFloat(_b2)<1){_b2=100*parseFloat(_b2)}var _b3=_6b.extractFromCss(css,".sIFR-root","kerning",true)||"";var _b4=_a6.gridFitType||_6b.extractFromCss(css,".sIFR-root","text-align")=="right"?"subpixel":"pixel";var _b5=_3b.forceTextTransform?_6b.extractFromCss(css,".sIFR-root","text-transform",true)||"none":"none";var _b6="";if(_ae){_6b.extractFromCss(css,".sIFR-root","text-align",true)}if(!_a6.modifyCss){_b6=_6b.cssToString(css)}var _b7=_a6.wmode||"";if(_b7=="transparent"){if(!ua.transparencySupport){_b7="opaque"}else{_b1="transparent"}}for(var i=0;i<_a9.length;i++){var _b9=_a9[i];if(!ua.verifiedKonqueror){if(dom.getComputedStyle(_b9,"lineHeight").match(/e\+08px/)){ua.supported=_3b.isEnabled=false;this.removeFlashClass();return}ua.verifiedKonqueror=true}if(dom.hasClass(_3d,_b9)||dom.hasClass(_3f,_b9)){continue}var _ba=false;if(!_b9.offsetHeight||!_b9.offsetWidth){if(!_3b.replaceNonDisplayed){continue}_b9.style.display="block";if(!_b9.offsetHeight||!_b9.offsetWidth){_b9.style.display="";continue}_ba=true}if(_ad&&ua.gecko){_b9.style.clear="both"}var _bb=null;if(_3b.fixWrap&&ua.ie&&dom.getComputedStyle(_b9,"display")=="block"){_bb=_b9.innerHTML;dom.setInnerHtml(_b9,"X")}var _bc=dom.getStyleAsInt(_b9,"width",ua.ie);if(ua.ie&&_bc==0){var _bd=dom.getStyleAsInt(_b9,"paddingRight",true);var _be=dom.getStyleAsInt(_b9,"paddingLeft",true);var _bf=dom.getStyleAsInt(_b9,"borderRightWidth",true);var _c0=dom.getStyleAsInt(_b9,"borderLeftWidth",true);_bc=_b9.offsetWidth-_be-_bd-_c0-_bf}if(_bb&&_3b.fixWrap&&ua.ie){dom.setInnerHtml(_b9,_bb)}var _c1,_c2;if(!ua.ie){_c1=dom.getStyleAsInt(_b9,"lineHeight");_c2=Math.floor(dom.getStyleAsInt(_b9,"height")/_c1)}else{if(ua.ie){var _bb=_b9.innerHTML;_b9.style.visibility="visible";_b9.style.overflow="visible";_b9.style.position="static";_b9.style.zoom="normal";_b9.style.writingMode="lr-tb";_b9.style.width=_b9.style.height="auto";_b9.style.maxWidth=_b9.style.maxHeight=_b9.style.styleFloat="none";var _c3=_b9;var _c4=_b9.currentStyle.hasLayout;if(_c4){dom.setInnerHtml(_b9,"<div class=\""+_42+"\">X<br />X<br />X</div>");_c3=_b9.firstChild}else{dom.setInnerHtml(_b9,"X<br />X<br />X")}var _c5=_c3.getClientRects();_c1=_c5[1].bottom-_c5[1].top;_c1=Math.ceil(_c1*0.8);if(_c4){dom.setInnerHtml(_b9,"<div class=\""+_42+"\">"+_bb+"</div>");_c3=_b9.firstChild}else{dom.setInnerHtml(_b9,_bb)}_c5=_c3.getClientRects();_c2=_c5.length;if(_c4){dom.setInnerHtml(_b9,_bb)}_b9.style.visibility=_b9.style.width=_b9.style.height=_b9.style.maxWidth=_b9.style.maxHeight=_b9.style.overflow=_b9.style.styleFloat=_b9.style.position=_b9.style.zoom=_b9.style.writingMode=""}}if(_ba){_b9.style.display=""}if(_ad&&ua.gecko){_b9.style.clear=""}_c1=Math.max(_44,_c1);_c1=Math.min(_45,_c1);if(isNaN(_c2)||!isFinite(_c2)){_c2=1}var _c6=Math.round(_c2*_c1);if(_c2>1&&_b0){_c6+=Math.round((_c2-1)*_b0)}var _c7=dom.create("span");_c7.className=_40;var _c8=_b9.cloneNode(true);for(var j=0,l=_c8.childNodes.length;j<l;j++){_c7.appendChild(_c8.childNodes[j].cloneNode(true))}if(_a6.modifyContent){_a6.modifyContent(_c8,_a6.selector)}if(_a6.modifyCss){_b6=_a6.modifyCss(css,_c8,_a6.selector)}var _cb=handleContent(_c8,_b5);if(_a6.modifyContentString){_cb=_a6.modifyContentString(_cb,_a6.selector)}if(_cb==""){continue}var _cc=["content="+_cb.replace(/\</g,"<").replace(/>/g,">"),"width="+_bc,"height="+_c6,"fitexactly="+(_ae?"true":""),"tunewidth="+(_a6.tuneWidth||""),"tuneheight="+(_a6.tuneHeight||""),"offsetleft="+(_a6.offsetLeft||""),"offsettop="+(_a6.offsetTop||""),"thickness="+(_a6.thickness||""),"sharpness="+(_a6.sharpness||""),"kerning="+_b3,"gridfittype="+_b4,"zoomsupport="+ua.zoomSupport,"filters="+_ac,"opacity="+_b2,"blendmode="+(_a6.blendMode||""),"size="+_c1,"zoom="+dom.getZoom(),"css="+_b6];_cc=encodeURI(_cc.join("&"));var _cd="sIFR_callback_"+_49++;var _ce={flashNode:null};window[_cd+"_DoFSCommand"]=(function(_cf){return function(_d0,arg){if(/(FSCommand\:)?resize/.test(_d0)){var $=arg.split(":");_cf.flashNode.setAttribute($[0],$[1]);if(ua.khtml){_cf.flashNode.innerHTML+=""}}}})(_ce);_c6=Math.round(_c2*getRatio(_c1)*_c1);var _d3=_af?_bc:"100%";var _d4;if(ua.ie){_d4=["<object classid=\"clsid:D27CDB6E-AE6D-11cf-96B8-444553540000\" id=\"",_cd,"\" sifr=\"true\" width=\"",_d3,"\" height=\"",_c6,"\" class=\"",_3e,"\">","<param name=\"movie\" value=\"",src,"\"></param>","<param name=\"flashvars\" value=\"",_cc,"\"></param>","<param name=\"allowScriptAccess\" value=\"always\"></param>","<param name=\"quality\" value=\"best\"></param>","<param name=\"wmode\" value=\"",_b7,"\"></param>","<param name=\"bgcolor\" value=\"",_b1,"\"></param>","<param name=\"name\" value=\"",_cd,"\"></param>","</object>","<scr","ipt event=FSCommand(info,args) for=",_cd,">",_cd,"_DoFSCommand(info, args);","</","script>"].join("")}else{_d4=["<embed class=\"",_3e,"\" type=\"application/x-shockwave-flash\" src=\"",src,"\" quality=\"best\" flashvars=\"",_cc,"\" width=\"",_d3,"\" height=\"",_c6,"\" wmode=\"",_b7,"\" bgcolor=\"",_b1,"\" name=\"",_cd,"\" allowScriptAccess=\"always\" sifr=\"true\"></embed>"].join("")}dom.setInnerHtml(_b9,_d4);_ce.flashNode=_b9.firstChild;_b9.appendChild(_c7);dom.addClass(_3d,_b9);if(_a6.onReplacement){_a6.onReplacement(_ce.flashNode)}}_5f.fragmentIdentifier.restore()};function handleContent(_d5,_d6){var _d7=[],_d8=[];var _d9=_d5.childNodes;var i=0;while(i<_d9.length){var _db=_d9[i];if(_db.nodeType==3){var _dc=_6b.normalize(_db.nodeValue);_dc=_6b.textTransform(_d6,_dc);_d8.push(_dc.replace(/\%/g,"%25").replace(/\&/g,"%26").replace(/\,/g,"%2C").replace(/\+/g,"%2B"))}if(_db.nodeType==1){var _dd=[];var _de=_db.nodeName.toLowerCase();var _df=_db.className||"";if(/\s+/.test(_df)){if(_df.indexOf(_41)){_df=_df.match("(\\s|^)"+_41+"-([^\\s$]*)(\\s|$)")[2]}else{_df=_df.match(/^([^\s]+)/)[1]}}if(_df!=""){_dd.push("class=\""+_df+"\"")}if(_de=="a"){var _e0=_db.getAttribute("href")||"";var _e1=_db.getAttribute("target")||"";_dd.push("href=\""+_e0+"\"","target=\""+_e1+"\"")}_d8.push("<"+_de+(_dd.length>0?" ":"")+escape(_dd.join(" "))+">");if(_db.hasChildNodes()){_d7.push(i);i=0;_d9=_db.childNodes;continue}else{if(!/^(br|img)$/i.test(_db.nodeName)){_d8.push("</",_db.nodeName.toLowerCase(),">")}}}if(_d7.length>0&&!_db.nextSibling){do{i=_d7.pop();_d9=_db.parentNode.parentNode.childNodes;_db=_d9[i];if(_db){_d8.push("</",_db.nodeName.toLowerCase(),">")}}while(i<_d9.length&&_d7.length>0)}i++}return _d8.join("").replace(/\n|\r/g,"")}}; sIFR.prefetch({ src: 'swf/sifr/helvetica.swf' }); sIFR.activate(); sIFR.replace({ selector: 'h2, h3', src: 'swf/sifr/helvetica.swf', wmode: 'transparent', css: { '.sIFR-root' : { 'color': '#000000', 'font-weight': 'bold', 'letter-spacing': '-1' }, 'a': { 'text-decoration': 'none' }, 'a:link': { 'color': '#000000' }, 'a:hover': { 'color': '#000000' }, '.span': { 'color': '#979797' }, 'label': { 'color': '#E11818' } } }); sIFR.replace({ selector: 'h4', src: 'swf/sifr/helvetica.swf', wmode: 'transparent', css: { '.sIFR-root' : { 'color': '#7E7E7E', 'font-weight': 'bold', 'letter-spacing': '-0.8' }, 'a': { 'text-decoration': 'none' }, 'a:link': { 'color': '#7E7E7E' }, 'a:hover': { 'color': '#7E7E7E' }, 'label': { 'color': '#E11818' } } }); sIFR.replace({ selector: '#cart p', src: 'swf/sifr/helvetica-lt.swf', wmode: 'transparent', css: { '.sIFR-root' : { 'color': '#979797', 'font-weight': 'bold', 'letter-spacing': '-0.8' }, 'a': { 'text-decoration': 'none' }, 'a:link': { 'color': '#979797' }, 'a:hover': { 'color': '#000000' }, 'label': { 'color': '#979797' } } }); Thank you in advance for your help!

Read the article

Installing vim7.2 on Solaris Sparc 10 as non-root

- by Tobbe

I'm trying to install vim to $HOME/bin by compiling the sources. ./configure --prefix=$home/bin seems to work, but when running make I get: > make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -o objects/buffer.o buffer.c In file included from buffer.c:28: vim.h:41: error: syntax error before ':' token In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first' How do I fix the make errors? Or is there another way to install vim as non-root? Thanks in advance EDIT: I took a look at the google groups link Sarah posted. The "Compiling Vim" page linked from there was for Linux, so the commands doesn't even work on Solars. But it did hint at logging the output of ./configure to a file, so I did that. Here it is: ./configure output removed. New version further down. Does anyone spot anything critical missing? EDIT 2: So I downloaded the vim package from sunfreeware. I couldn't just install it, since I don't have root privileges, but I was able to extract the package file. This was the file structure in it: `-- SMCvim `-- reloc |-- bin |-- doc | `-- vim `-- share |-- man | `-- man1 `-- vim `-- vim72 |-- autoload | `-- xml |-- colors |-- compiler |-- doc |-- ftplugin |-- indent |-- keymap |-- lang |-- macros | |-- hanoi | |-- life | |-- maze | `-- urm |-- plugin |-- print |-- spell |-- syntax |-- tools `-- tutor I moved the three files (vim, vimtutor, xdd) in SMCvim/reloc/bin to $HOME/bin, so now I can finally run $HOME/bin/vim! But where do I put the "share" directory and its content? EDIT 3: It might also be worth noting that there already exists an install of vim on the system, but it is broken. When I try to run it I get: ld.so.1: vim: fatal: libgtk-1.2.so.0: open failed: No such file or directory "which vim" outputs /opt/local/bin/vim EDIT 4: Trying to compile this on Solaris 10. uname -a SunOS ws005-22 5.10 Generic_141414-10 sun4u sparc SUNW,SPARC-Enterprise New ./configure output: ./configure --prefix=$home/bin ac_cv_sizeof_int=8 --enable-rubyinterp configure: loading cache auto/config.cache checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... unsupported checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/sfw/bin/ggrep checking for egrep... /usr/sfw/bin/ggrep -E checking for library containing strerror... none required checking for gawk... gawk checking for strip... strip checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... no configure: checking for buggy tools... checking for BeOS... no checking for QNX... no checking for Darwin (Mac OS X)... no checking --with-local-dir argument... Defaulting to /usr/local checking --with-vim-name argument... Defaulting to vim checking --with-ex-name argument... Defaulting to ex checking --with-view-name argument... Defaulting to view checking --with-global-runtime argument... no checking --with-modified-by argument... no checking if character set is EBCDIC... no checking --disable-selinux argument... no checking for is_selinux_enabled in -lselinux... no checking --with-features argument... Defaulting to normal checking --with-compiledby argument... no checking --disable-xsmp argument... no checking --disable-xsmp-interact argument... no checking --enable-mzschemeinterp argument... no checking --enable-perlinterp argument... no checking --enable-pythoninterp argument... no checking --enable-tclinterp argument... no checking --enable-rubyinterp argument... yes checking for ruby... /opt/sfw/bin/ruby checking Ruby version... OK checking Ruby header files... /opt/sfw/lib/ruby/1.6/sparc-solaris2.10 checking --enable-cscope argument... no checking --enable-workshop argument... no checking --disable-netbeans argument... no checking for socket in -lsocket... yes checking for gethostbyname in -lnsl... yes checking whether compiling netbeans integration is possible... no checking --enable-sniff argument... no checking --enable-multibyte argument... no checking --enable-hangulinput argument... no checking --enable-xim argument... defaulting to auto checking --enable-fontset argument... no checking for xmkmf... /usr/openwin/bin/xmkmf checking for X... libraries /usr/openwin/lib, headers /usr/openwin/include checking whether -R must be followed by a space... no checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking if X11 header files can be found... yes checking for _XdmcpAuthDoIt in -lXdmcp... no checking for IceOpenConnection in -lICE... yes checking for XpmCreatePixmapFromData in -lXpm... yes checking if X11 header files implicitly declare return values... no checking --enable-gui argument... yes/auto - automatic GUI support checking whether or not to look for GTK... yes checking whether or not to look for GTK+ 2... yes checking whether or not to look for GNOME... no checking whether or not to look for Motif... yes checking whether or not to look for Athena... yes checking whether or not to look for neXtaw... yes checking whether or not to look for Carbon... yes checking --with-gtk-prefix argument... no checking --with-gtk-exec-prefix argument... no checking --disable-gtktest argument... gtk test enabled checking for gtk-config... /opt/local/bin/gtk-config checking for pkg-config... /usr/bin/pkg-config checking for GTK - version = 2.2.0... yes; found version 2.4.9 checking X11/SM/SMlib.h usability... yes checking X11/SM/SMlib.h presence... yes checking for X11/SM/SMlib.h... yes checking X11/xpm.h usability... yes checking X11/xpm.h presence... yes checking for X11/xpm.h... yes checking X11/Sunkeysym.h usability... yes checking X11/Sunkeysym.h presence... yes checking for X11/Sunkeysym.h... yes checking for XIMText in X11/Xlib.h... yes X GUI selected; xim has been enabled checking whether toupper is broken... no checking whether __DATE__ and __TIME__ work... yes checking elf.h usability... yes checking elf.h presence... yes checking for elf.h... yes checking for main in -lelf... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/wait.h that defines union wait... no checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking stdlib.h usability... yes checking stdlib.h presence... yes checking for stdlib.h... yes checking string.h usability... yes checking string.h presence... yes checking for string.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/utsname.h usability... yes checking sys/utsname.h presence... yes checking for sys/utsname.h... yes checking termcap.h usability... yes checking termcap.h presence... yes checking for termcap.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sgtty.h usability... yes checking sgtty.h presence... yes checking for sgtty.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/types.h usability... yes checking sys/types.h presence... yes checking for sys/types.h... yes checking termio.h usability... yes checking termio.h presence... yes checking for termio.h... yes checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking unistd.h usability... yes checking unistd.h presence... yes checking for unistd.h... yes checking stropts.h usability... no checking stropts.h presence... yes configure: WARNING: stropts.h: present but cannot be compiled configure: WARNING: stropts.h: check for missing prerequisite headers? configure: WARNING: stropts.h: see the Autoconf documentation configure: WARNING: stropts.h: section "Present But Cannot Be Compiled" configure: WARNING: stropts.h: proceeding with the preprocessor's result configure: WARNING: stropts.h: in the future, the compiler will take precedence checking for stropts.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/systeminfo.h usability... yes checking sys/systeminfo.h presence... yes checking for sys/systeminfo.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking sys/stream.h usability... no checking sys/stream.h presence... yes configure: WARNING: sys/stream.h: present but cannot be compiled configure: WARNING: sys/stream.h: check for missing prerequisite headers? configure: WARNING: sys/stream.h: see the Autoconf documentation configure: WARNING: sys/stream.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/stream.h: proceeding with the preprocessor's result configure: WARNING: sys/stream.h: in the future, the compiler will take precedence checking for sys/stream.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking libc.h usability... no checking libc.h presence... no checking for libc.h... no checking sys/statfs.h usability... yes checking sys/statfs.h presence... yes checking for sys/statfs.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking sys/poll.h usability... yes checking sys/poll.h presence... yes checking for sys/poll.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking util/debug.h usability... no checking util/debug.h presence... no checking for util/debug.h... no checking util/msg18n.h usability... no checking util/msg18n.h presence... no checking for util/msg18n.h... no checking frame.h usability... no checking frame.h presence... no checking for frame.h... no checking sys/acl.h usability... yes checking sys/acl.h presence... yes checking for sys/acl.h... yes checking sys/access.h usability... no checking sys/access.h presence... no checking for sys/access.h... no checking sys/sysctl.h usability... no checking sys/sysctl.h presence... no checking for sys/sysctl.h... no checking sys/sysinfo.h usability... yes checking sys/sysinfo.h presence... yes checking for sys/sysinfo.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking wctype.h usability... yes checking wctype.h presence... yes checking for wctype.h... yes checking for sys/ptem.h... no checking for pthread_np.h... no checking strings.h usability... yes checking strings.h presence... yes checking for strings.h... yes checking if strings.h can be included after string.h... yes checking whether gcc needs -traditional... no checking for an ANSI C-conforming const... yes checking for mode_t... yes checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking whether time.h and sys/time.h may both be included... yes checking for ino_t... yes checking for dev_t... yes checking for rlim_t... yes checking for stack_t... yes checking whether stack_t has an ss_base field... no checking --with-tlib argument... empty: automatic terminal library selection checking for tgetent in -lncurses... yes checking whether we talk terminfo... yes checking what tgetent() returns for an unknown terminal... zero checking whether termcap.h contains ospeed... yes checking whether termcap.h contains UP, BC and PC... yes checking whether tputs() uses outfuntype... no checking whether sys/select.h and sys/time.h may both be included... yes checking for /dev/ptc... no checking for SVR4 ptys... yes checking for ptyranges... don't know checking default tty permissions/group... can't determine - assume ptys are world accessable world checking return type of signal handlers... void checking for struct sigcontext... no checking getcwd implementation is broken... no checking for bcmp... yes checking for fchdir... yes checking for fchown... yes checking for fseeko... yes checking for fsync... yes checking for ftello... yes checking for getcwd... yes checking for getpseudotty... no checking for getpwnam... yes checking for getpwuid... yes checking for getrlimit... yes checking for gettimeofday... yes checking for getwd... yes checking for lstat... yes checking for memcmp... yes checking for memset... yes checking for nanosleep... no checking for opendir... yes checking for putenv... yes checking for qsort... yes checking for readlink... yes checking for select... yes checking for setenv... yes checking for setpgid... yes checking for setsid... yes checking for sigaltstack... yes checking for sigstack... yes checking for sigset... yes checking for sigsetjmp... yes checking for sigaction... yes checking for sigvec... no checking for strcasecmp... yes checking for strerror... yes checking for strftime... yes checking for stricmp... no checking for strncasecmp... yes checking for strnicmp... no checking for strpbrk... yes checking for strtol... yes checking for tgetent... yes checking for towlower... yes checking for towupper... yes checking for iswupper... yes checking for usleep... yes checking for utime... yes checking for utimes... yes checking for st_blksize... no checking whether stat() ignores a trailing slash... no checking for iconv_open()... yes; with -liconv checking for nl_langinfo(CODESET)... yes checking for strtod in -lm... yes checking for strtod() and other floating point functions... yes checking --disable-acl argument... no checking for acl_get_file in -lposix1e... no checking for acl_get_file in -lacl... no checking for POSIX ACL support... no checking for Solaris ACL support... yes checking for AIX ACL support... no checking --disable-gpm argument... no checking for gpm... no checking --disable-sysmouse argument... no checking for sysmouse... no checking for rename... yes checking for sysctl... not usable checking for sysinfo... not usable checking for sysinfo.mem_unit... no checking for sysconf... yes checking size of int... (cached) 8 checking whether memmove handles overlaps... yes checking for _xpg4_setrunelocale in -lxpg4... no checking how to create tags... ctags -t checking how to run man with a section nr... man -s checking --disable-nls argument... no checking for msgfmt... msgfmt checking for NLS... no "po/Makefile" - disabled checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for dlopen()... yes checking for dlsym()... yes checking setjmp.h usability... yes checking setjmp.h presence... yes checking for setjmp.h... yes checking for GCC 3 or later... yes configure: updating cache auto/config.cache configure: creating auto/config.status config.status: creating auto/config.mk config.status: creating auto/config.h Make: make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first mkdir objects CC="gcc -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/openwin/include -I/opt/sfw/lib/ruby/1.6/sparc-solaris2.10 " srcdir=. sh ./osdef.sh gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -I/opt/sfw/lib/ruby/1.6/sparc-solaris2.10 -o objects/buffer.o buffer.c In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first'

Read the article

c# Truncate HTML safely for article summary

- by WickedW

Hi All, Does anyone have a c# variation of this? This is so I can take some html and display it without breaking as a summary lead in to an article? http://stackoverflow.com/questions/1193500/php-truncate-html-ignoring-tags Save me from reinventing the wheel! Thank you very much ---------- edit ------------------ Sorry, new here, and your right, should have phrased the question better, heres a bit more info I wish to take a html string and truncate it to a set number of words (or even char length) so I can then show the start of it as a summary (which then leads to the main article). I wish to preserve the html so I can show the links etc in preview. The main issue I have to solve is the fact that we may well end up with unclosed html tags if we truncate in the middle of 1 or more tags! The idea I have for solution is to a) truncate the html to N words (words better but chars ok) first (be sure not to stop in the middle of a tag and truncate a require attribute) b) work through the opened html tags in this truncated string (maybe stick them on stack as I go?) c) then work through the closing tags and ensure they match the ones on stack as I pop them off? d) if any open tags left on stack after this, then write them to end of truncated string and html should be good to go!!!! -- edit 12112009 Here is what I have bumbled together so far as a unittest file in VS2008, this 'may' help someone in future My hack attempts based on Jan code are at top for char version + word version (DISCLAIMER: this is dirty rough code!! on my part) I assume working with 'well-formed' HTML in all cases (but not necessarily a full document with a root node as per XML version) Abels XML version is at bottom, but not yet got round to fully getting tests to run on this yet (plus need to understand the code) ... I will update when I get chance to refine having trouble with posting code? is there no upload facility on stack? Thanks for all comments :) using System; using System.Collections.Generic; using System.Text.RegularExpressions; using System.Xml; using System.Xml.XPath; using Microsoft.VisualStudio.TestTools.UnitTesting; namespace PINET40TestProject { [TestClass] public class UtilityUnitTest { public static string TruncateHTMLSafeishChar(string text, int charCount) { bool inTag = false; int cntr = 0; int cntrContent = 0; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrContent == charCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) cntrContent++; } string substr = text.Substring(0, cntr); //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); // to be honest, this seemed like a good idea then I got lost along the way // so logic is probably hanging by a thread!! foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishWord(string text, int wordCount) { bool inTag = false; int cntr = 0; int cntrWords = 0; Char lastc = ' '; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrWords == wordCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) { // do not count double spaces, and a space not in a tag counts as a word if (c == 32 && lastc != 32) cntrWords++; } } string substr = text.Substring(0, cntr) + " ..."; //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishCharXML(string text, int charCount) { // your data, probably comes from somewhere, or as params to a methodint XmlDocument xml = new XmlDocument(); xml.LoadXml(text); // create a navigator, this is our primary tool XPathNavigator navigator = xml.CreateNavigator(); XPathNavigator breakPoint = null; // find the text node we need: while (navigator.MoveToFollowing(XPathNodeType.Text)) { string lastText = navigator.Value.Substring(0, Math.Min(charCount, navigator.Value.Length)); charCount -= navigator.Value.Length; if (charCount <= 0) { // truncate the last text. Here goes your "search word boundary" code: navigator.SetValue(lastText); breakPoint = navigator.Clone(); break; } } // first remove text nodes, because Microsoft unfortunately merges them without asking while (navigator.MoveToFollowing(XPathNodeType.Text)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent, then move the rest navigator.MoveTo(breakPoint); while (navigator.MoveToFollowing(XPathNodeType.Element)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent // then remove *all* empty nodes to clean up (not necessary): // TODO, add empty elements like <br />, <img /> as exclusion navigator.MoveToRoot(); while (navigator.MoveToFollowing(XPathNodeType.Element)) { while (!navigator.HasChildren && (navigator.Value ?? "").Trim() == "") { navigator.DeleteSelf(); } } // moves to parent navigator.MoveToRoot(); return navigator.InnerXml; } [TestMethod] public void TestTruncateHTMLSafeish() { // Case where we just make it to start of HREF (so effectively an empty link) // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>1234</h1><b><i>56789</i>012</b>", TruncateHTMLSafeishChar( @"<h1>1234</h1><b><i>56789</i>012345</b>", 12)); // In middle of a! Assert.AreEqual(@"<h1>1234</h1><a href=""testurl""><b>567</b></a>", TruncateHTMLSafeishChar( @"<h1>1234</h1><a href=""testurl""><b>5678</b></a><i><strong>some italic nested in string</strong></i>", 7)); // more Assert.AreEqual(@"<div><b><i><strong>1</strong></i></b></div>", TruncateHTMLSafeishChar( @"<div><b><i><strong>12</strong></i></b></div>", 1)); // br Assert.AreEqual(@"<h1>1 3 5</h1><br />6", TruncateHTMLSafeishChar( @"<h1>1 3 5</h1><br />678<br />", 6)); } [TestMethod] public void TestTruncateHTMLSafeishWord() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>one two <br /></h1><b><i>three ...</i></b>", TruncateHTMLSafeishWord( @"<h1>one two <br /></h1><b><i>three </i>four</b>", 3), "we have added ' ...' to end of summary"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } [TestMethod] public void TestTruncateHTMLSafeishWordXML() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags string output = TruncateHTMLSafeishCharXML( @"<body><h1>one two </h1><b><i>three </i>four</b></body>", 13); Assert.AreEqual(@"<body>\r\n <h1>one two </h1>\r\n <b>\r\n <i>three</i>\r\n </b>\r\n</body>", output, "XML version, no ... yet and addeds '\r\n + spaces?' to format document"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishCharXML( @"<body><h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i></body>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } } }

Read the article

game speed problem

- by Meko

HI..I made a little game.But this game works on every computer with different speed.I think it is about resolution.I used every thing in paintcomponent.and If I change screen size the game goes slower or faster.And if i run this game on another computer wich has different resolution it also works different. This is my game http://rapidshare.com/files/364597095/ShooterGame.2.6.0.jar and here code public class Shooter extends JFrame implements KeyListener, Runnable { JFrame frame = new JFrame(); String player; Font startFont, startSubFont, timerFont,healthFont; Image img; Image backGround; Graphics dbi; URL url1 = this.getClass().getResource("Images/p2.gif"); URL url2 = this.getClass().getResource("Images/p3.gif"); URL url3 = this.getClass().getResource("Images/p1.gif"); URL url4 = this.getClass().getResource("Images/p4.gif"); URL urlMap = this.getClass().getResource("Images/zemin.jpg"); Player p1 = new Player(5, 150, 10, 40, Color.GREEN, url3); Computer p2 = new Computer(750, 150, 10, 40, Color.BLUE, url1); Computer p3 = new Computer(0, 0, 10, 40, Color.BLUE, url2); Computer p4 = new Computer(0, 0, 10, 40, Color.BLUE, url4); ArrayList<Bullets> b = new ArrayList<Bullets>(); ArrayList<CBullets> cb = new ArrayList<CBullets>(); Thread sheap; boolean a, d, w, s; boolean toUp, toDown; boolean GameOver; boolean Level2; boolean newGame, resart, pause; int S, E; int random; int cbSpeed = 0; long timeStart, timeEnd; int timeElapsed; long GameStart, GameEnd; int GameScore; int Timer = 0; int timerStart, timerEnd; public Shooter() { sheap = new Thread(this); sheap.start(); startFont = new Font("Tiresias PCFont Z", Font.BOLD + Font.ITALIC, 32); startSubFont = new Font("Tiresias PCFont Z", Font.BOLD + Font.ITALIC, 25); timerFont = new Font("Tiresias PCFont Z", Font.BOLD + Font.ITALIC, 16); healthFont = new Font("Tiresias PCFont Z", Font.BOLD + Font.ITALIC, 16); setTitle("Shooter 2.5.1"); setBounds(350, 250, 800, 600); // setResizable(false); setBackground(Color.black); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); addKeyListener(this); a = d = w = s = false; toUp = toDown = true; GameOver = true; newGame = true; Level2 = false; S = E = 0; setVisible(true); } public void paint(Graphics g) { img = createImage(getWidth(), getHeight()); dbi = img.getGraphics(); paintComponent(dbi); g.drawImage(img, 0, 0, this); } public void paintComponent(Graphics g) { repaint(); timeStart = System.currentTimeMillis(); backGround = Toolkit.getDefaultToolkit().getImage(urlMap); g.drawImage(backGround, 0, 0, null); g.setColor(Color.red); g.setFont(healthFont); g.drawString("" + player + " Health : " + p1.health, 30, 50); g.setColor(Color.red); g.drawString("Computer Health : " + (p2.health + p3.health + p4.health), 600, 50); g.setColor(Color.BLUE); g.setFont(timerFont); g.drawString("Time : " + Timer, 330, 50); if (newGame) { g.setColor(Color.LIGHT_GRAY); g.setFont(startFont); g.drawString("Well Come To Shoot Game", 200, 190); g.drawString("Press ENTER To Start", 250, 220); g.setColor(Color.LIGHT_GRAY); g.setFont(startSubFont); g.drawString("Use W,A,S,D and Space For Fire", 200, 250); g.drawString("GOOD LUCK", 250, 280); newGame(); } if (!GameOver) { for (Bullets b1 : b) { b1.draw(g); } for (CBullets b2 : cb) { b2.draw(g); } update(); // Here MOvements for Player and For Fires } if (p1.health <= 0) { g.setColor(p2.col); g.setFont(startFont); g.drawString("Computer Wins ", 200, 190); g.drawString("Press Key R to Restart ", 200, 220); GameOver = true; } else if (p2.health <= 0 && p3.health <= 0 && p4.health <= 0) { g.setColor(p1.col); g.setFont(startFont); g.drawString(""+player+" Wins ", 200, 190); g.drawString("Press Key R to Resart ", 200, 220); GameOver = true; g.setColor(Color.MAGENTA); g.drawString(""+player+"`s Score is " + Timer, 200, 120); } if (Level2) { if (p3.health >= 0) { p3.draw(g); for (CBullets b3 : cb) { b3.draw(g); } } else { p3.x = 1000; } if (p4.health >= 0) { p4.draw(g); for (CBullets b4 : cb) { b4.draw(g); } } else { p4.x = 1000; } } if (p1.health >= 0) { p1.draw(g); } if (p2.health >= 0) { p2.draw(g); } else { p2.x = 1000; } } public void update() { if (w && p1.y > 54) { p1.moveUp(); } if (s && p1.y < 547) { p1.moveDown(); } if (a && p1.x > 0) { p1.moveLeft(); } if (d && p1.x < 200) { p1.moveRight(); } random = 1 * (int) (Math.random() * 100); if (random > 96) { if (p2.health >= 0) { CBullets bo = p2.getCBull(); bo.xVel =-1-cbSpeed; cb.add(bo); } if (Level2) { if (p3.health >= 0) { CBullets bo1 = p3.getCBull(); bo1.xVel = -2-cbSpeed; cb.add(bo1); } if (p4.health >= 0) { CBullets bo2 = p4.getCBull(); bo2.xVel = -4-cbSpeed; cb.add(bo2); } } } if (S == 1) { if (p1.health >= 0) { Bullets bu = p1.getBull(); bu.xVel = 5; b.add(bu); S += 1; } } //Here Also Problem .. When COmputer have More fire then it gaves Array Exeption . Or Player have More Fire for (int i = cb.size() -1; i = 0 ; i--) { boolean bremoved = false; for (int j = b.size() -1 ; j =0 ; j--) { if (b.get(j).rect.intersects(cb.get(i).rect) || cb.get(i).rect.intersects(b.get(j).rect)) { bremoved = true; b.remove(j); } } if(bremoved) cb.remove(i); } for (int i = 0; i < b.size(); i++) { b.get(i).move(); if (b.get(i).rect.intersects(p2.rect)) { if (p2.health >= 0) { p2.health--; b.remove(i); // System.out.println("Hited P2"); i--; continue; } } if (b.get(i).rect.intersects(p3.rect)) { if (p3.health >= 0) { p3.health--; b.remove(i); // System.out.println("Hited P3"); i--; continue; } } if (b.get(i).rect.intersects(p4.rect)) { if (p4.health >= 0) { p4.health--; b.remove(i); // System.out.println("Hited P4"); i--; continue; } } if (b.get(i).rect.x > 790) { b.remove(i); } } for (int j = 0; j < cb.size(); j++) { cb.get(j).move(); if (cb.get(j).rect.intersects(p1.rect) && cb.get(j).xVel < 0) { p1.health--; cb.remove(j); j--; continue; } } timeEnd = System.currentTimeMillis(); timeElapsed = (int) (timeEnd - timeStart); } public void level2() { if (p2.health <= 10) { Level2 = true; cbSpeed = 4; p3.x = 750; p4.x = 750; p2.speed = 10; p3.speed = 20; p4.speed = 30; } } public void keyTyped(KeyEvent e) { } public void keyPressed(KeyEvent e) { switch (e.getKeyCode()) { case KeyEvent.VK_ENTER: newGame = false; break; case KeyEvent.VK_P: pause = true; break; case KeyEvent.VK_R: resart = true; break; case KeyEvent.VK_A: a = true; break; case KeyEvent.VK_D: d = true; break; case KeyEvent.VK_W: w = true; break; case KeyEvent.VK_S: s = true; break; case KeyEvent.VK_SPACE: S += 1; break; } } public void keyReleased(KeyEvent e) { switch (e.getKeyCode()) { case KeyEvent.VK_A: a = false; break; case KeyEvent.VK_D: d = false; break; case KeyEvent.VK_W: w = false; break; case KeyEvent.VK_S: s = false; break; case KeyEvent.VK_SPACE: S = 0; break; } } public void newGame() { p1.health = 20; p2.health = 20; p3.health = 20; p4.health = 20; p3.x = 0; p4.x = 0; p2.x = 750; Level2 = false; cbSpeed = 0; p2.speed = 9; b.removeAll(b); cb.removeAll(cb); timerStart = (int) System.currentTimeMillis(); GameOver = false; } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { KeyListener k = new Shooter(); } }); } @Override public void run() { player = JOptionPane.showInputDialog(frame, "Enter Player Name", "New Player", JOptionPane.DEFAULT_OPTION); while (true) { timerEnd = (int) System.currentTimeMillis(); if (resart) { newGame(); resart = false; } if (pause) { Thread.currentThread().notify(); } try { if (!GameOver) { Timer = timerEnd - timerStart; level2(); if (p1.y < p2.y && p2.y60) { p2.moveUp(); } if (p1.y < p3.y && p3.y43) { p3.moveUp(); } if (p1.y < p4.y && p4.y43) { p4.moveUp(); } if (p1.y > p2.y && p2.y<535) { p2.moveDown(); } if (p1.y > p3.y && p3.y<535) { p3.moveDown(); } if (p1.y > p4.y && p4.y<530) { p4.moveDown(); } } if (timeElapsed < 125) { Thread.currentThread().sleep(125); } } catch (InterruptedException ex) { System.out.print("FInished"); } } } }

Search Results

Search found 9236 results on 370 pages for 'discrete space'.

Page 369/370 | < Previous Page | 365 366 367 368 369 370 | Next Page >

- by DuffDuff

- by Asok

- by mukeshpawar

- by Monomachus

- by chetans

- by Davey

- by Joel J. Adamson

- by krikara

- by Party Mcfly

- by Dasa

- by mmundiff

- by Amber

- by Amber

- by Jonathon

- by playahabana

- by Stephen Walther

- by Mohan Ramanuja

- by Sarah Kho

- by selvin

- by user288306

- by Tobbe

- by WickedW

- by Meko

< Previous Page | 365 366 367 368 369 370 | Next Page >