Search Results

Search found 20569 results on 823 pages for 'pc settings'.

Page 369/823 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• Unbutu 10.10 (MAVERICK) live cd booting?

  - by D3c3nt Boy

  I am user of window and i had keen to shift on LINUX so i made live cd of UNBUTU 10.10 (MAVERICK) THIS IS MY VERY FIRST TIME TO USE UNBUTU I put cd in cd drive and set bios setup and unbutu cd worked and logo of unbutu appear on screen but suddenly before start up screen it shows this Busy Box v 1.5 (Unbutu 1: 1.15.31 unbutu5) built in shell (ash) enter help for a list of built in commands When i type help and press enter the list of commands appear like below alias break cd chdir command continue echo eval exec export filse getopts hash help let local printf pwd read readonly return set shift source test This is my first time so i have no idea what to do i restart my pc several but it happens every time plz help me. what should i do? Sorry for my

  Read the article

• Not able to set up Gwibber Online accounts

  - by Karthik

  I first tried Ubuntu 12.10 from the Live USB and then eith Virtual Box. In both cases I was able to connect to my google Account from Gwibber. But now I have done a clean install, but am not able to connect at all. I get a rotating circle, which just keeps on going. I am using a proxy server whose details I have given in the Network Proxy settings. I have also set up the http_proxy, https_proxy and ftp_proxy variables.

  Read the article

• How to improve performance of ubuntu server 10.04 for my dms system?

  - by prasanna

  I will be using one of the dms (document management system) which is java + jackrabbit + postgresql + jboss + openoffice based on ubuntu server 10.04. this is the only application i will running on my server. i want to speed up the performance of the system for this. can you give me tips for improvements of ubuntu server? can i change any settings which give fast system performance. My application will be used concurrently by around 70 - 80 people. We have total 600 users. they will constanly upload , download the files in dms. i am going to use dedicated dell server with minimum 4 gb of RAM. i appreciate help. thanks and regards, Prasanna

  Read the article

• (Xubuntu) no touchpad or mouse on Aspire One D270

  - by Sman789

  I installed Xubuntu 12.10 on an Aspire One D270 using a Live USB. Initially, the live USB wouldn't boot, but by running sudo apt-get dist-upgrade on it (on a different machine), I upgraded the kernel and it now works perfectly. However, after installing Xubuntu from the stick onto the D270, neither the touchpad nor an external mouse works. If I use the keyboard to navigate to the mouse settings, the 'device' setting is greyed out. I don't see why the mouse should work perfectly when running from the live USB but not once installed to the machine...? Thanks for any help.

  Read the article

• Remmina remote control: black screen after XBMC exit

  - by Tinellus

  I have a HTPC (Quietpc Sidewinder Fanless media pc) running Ubuntu 12.04 and autostarting XBMC Frodo. I'm remote controlling this machine using my laptop also running Ubuntu 12.04 and using Remmina VNC as a client. Everything works perfectly as long as XBMC is running: I can see the remote screen and control via mouse and keyboard on the laptop. However, when XBMC is stopped on the HTPC, my TV shows the Ubuntu desktop normally, but the screen on the laptop turns black. I'm however still controlling the HTPC since I can see the arrow moving upon laptop mouse movement, and I can still type text in the HTPC. Oddly, when the screensaver on the HTPC kicks in, I again have a visual on the laptop. Anyone any thoughts on this? What should I do to maintain visual after stopping XBMC? Any suggestions much appreciated. Thanks!

  Read the article

• Multiplayer mobile games and coping with high latency

  - by liortal

  I'm currently researching regarding a design for an online (realtime) mobile multiplayer game. As such, i'm taking into consideration that latencies (lag) is going to be high (perhaps higher than PC/consoles). I'd like to know if there are ways to overcome this or minimize the issues of high latency? The model i'll be using is peer-to-peer (using Photon cloud to broadcast messages to all other players). How do i deal with a scenario where a message about a local object's state at time t will only get to other players at *t + HUGE_LAG* ?

  Read the article

• website not available outside

  - by Keshav Nair

  I am new to ubuntu server and i have installed ubuntu server on a vm and installed LAMP etc but my problem is that my website is not visible outside. i have port triggering and added port 21,22 and 80. i really don't know what am doing, i am totally lost! I have a dynamic ip but i can access the server through 192.168.25.1 no matter how many times i restart the modem and from my public ip. I get redirected to my router settings what should i do??

  Read the article

• XNA: Huge Tile Map, long load times

  - by Zach

  Recently I built a tile map generator for a game project. What I am very proud of is that I finally got it to the point where I can have a GIANT 2D map build perfectly on my PC. About 120000pixels by 40000 pixels. I can go larger actually, but I have only 1 draw back. #1 ram, the map currently draws about 320MB of ram and I know the Xbox allows 512MB I think? #2 It takes 20 mins for the map to build then display on the Xbox, on my PC it take less then a few seconds. I need to bring that 20 minutes of generating from 20 mins to how ever little bit I can, and how can a lower the amount of RAM usage while still being able to generate my map. Right now everything is stored in Jagged Arrays, each piece generating in a size of 1280x720 (the mother piece). Up to the amount that I need, every block is exactly 40x40 pixels however the blocks get removed from a List or regenerated in a List depending how close the mother piece is to the player. Saving A LOT of CPU, so at all times its no more then looping through 5184 some blocks. Well at least I'm sure of this. But how can I lower my RAM usage without hurting the size of the map, and how can I lower these INSANE loading times? EDIT: Let me explain my self better. Also I'd like to let everyone know now that I'm inexperienced with many of these things. So here is an example of the arrays I'm using. Here is the overall in a shorter term: int[][] array = new int[30][]; array[0] = new int[] { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }; array[1] = new int[] { 1, 3, 3, 3, 3, 1, 0, 0, 0, 0, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }; that goes on for around 30 arrays downward. Now for every time it hits a 1, it goes and generates a tile map 1280x720 and it does that exactly the way it does it above. This is how I loop through those arrays: for (int i = 0; i < array.Length; i += 1) { for (int h = 0; h < array[i].Length; h += 1) { } { Now how the tiles are drawn and removed is something like this: public void Draw(SpriteBatch spriteBatch, Vector2 cam) { if (cam.X >= this.Position.X - 1280) { if (cam.X <= this.Position.X + 2560) { if (cam.Y >= this.Position.Y - 720) { if (cam.Y <= this.Position.Y + 1440) { if (visible) { if (once == 0) { once = 1; visible = false; regen(); } } for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles[i].Draw(spriteBatch, cam); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles[i].Draw(spriteBatch, cam); } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } else { once = 0; for (int i = Tiles.Count - 1; i >= 0; i--) { Tiles.RemoveAt(i); } for (int i = unWalkTiles.Count - 1; i >= 0; i--) { unWalkTiles.RemoveAt(i); } } } } If you guys still need more information just ask in the comments.

  Read the article

• Le prix de la DRAM s'effondre, les constructeurs en profitent pour doper leurs machines de mémoire

  Le prix de la DRAM s'effondre, les constructeurs en profitent pour doper leurs machines de mémoire Le cabinet d'analyses iSuppli s'est penché sur le marché de la mémoire, et il en a conclu que les prix des puces DRAM sont au plus bas, et que la descente se poursuit. Par exemple, un module DRAM DDR3 de 2GB coûtait 21 dollars en décembre 2010 (pour les professionnels) alors que son tarif avoisinait les 45 dollars en juin de la même année. Comment expliquer une telle dégringolade (plus de 50% de perte de valeur) ? "Les prix de la DRAM en général ont été affectés par le peu de demande en PC, surtout pendant la première moitié de 2010 ; à quoi se sont ajoutés des stocks gonflés de solutions de mémoire ...

  Read the article

• Unable to access internet from devices connected over wifi hotspot with ubuntu 13.04

  - by Jeesmon Jacob

  I am using ubuntu 13.04 and till couple of days back I was able to connect to internet using the hotspot connection I had created previously when I started using ubuntu 10... But two days back I noticed that devices are getting connected to wifi but are not able to access internet.. I deleted my old wifi hotspot and created a new one by going to network settings and there by clicking create a hotspot option.. I logged in from my wife's laptop which is running on windows 7. It was able to establish connection but was not able to access the internet.. Same is happening with my iPhone too I am able to connect to hotspot but for some reason it is not able to access internet... Any help would be highly appreciated.. Thanks Jacob

  Read the article

• Opening an XML in Unity3D when the game is built

  - by N0xus

  At the moment, my game can open up an XML file inside the editor when I run it. In my XMLReader.cs I'm loading in my file like so: _xmlDocument.Load(Application.dataPath + "\\HV_Settings\\Settings.xml"); This class also deals with what the XML should do once it has been read in. However, when I build the game and run the exe, this file isn't called. I know that I can store this file in the C drive, but I want to keep everything in one place so when I start to release what I'm working on, the user doesn't need to do anything. Am I doing something silly which is causing the XML not to be read?

  Read the article

• RewriteRule not working at server level?

  - by Alexis Wilke

  I wanted to forbid some robots from doing certain things to my websites and decided to add a RewriteRule for that purpose. The rule works when put in one of my <VirtualHost *:80> tag and looks like this: RewriteEngine On RewriteCond %{HTTP_USER_AGENT} libwww-perl RewriteCond %{REQUEST_METHOD} POST RewriteRule . - [F,L] However, I wanted to apply that to all my websites instead of just one of them. So with the newest version of Apache2 settings, I decided to put that code in the security.conf file. This file is defined under /etc/apache2/conf-available/... (and yes, I have a softlink from the /etc/apache2/conf-enabled/... directory.) However, if the definition is only in the conf-available/security.conf files, it somehow gets ignored. From the documentation, it says that these Rewrite* commands all work at server level! Any idea of what I would be missing?

  Read the article

• Move website from host a to host b without down time dns change

  - by grigione

  I would like to move my website from host A to host B I have uploaded a copy of my site to the new host, while keeping the old copy in place with the old host I will need to update the nameservers to point to the new nameservers. I'll want to change the DNS settings of domain name to point to new host b To avoid down time for the DNS change to propagate through the net, can I add the old nameservers and new nameservers together without causing problems, or must I delete the old nameservers first? What happens to my website when it points to two different nameservers?

  Read the article

• Can not resolve hostnames on Xubuntu computers

  - by P Curtis

  I have a network of computers which has been running for many years. I have changed two of those to Xubuntu 11.10 and found I can no longer connect by ssh using the host-name from any other machine. I can connect and ping by IP although ping is very slow in one case (~200ms). All other machines are fine including another with Ubuntu 11.10. Host-name resolution works from Xubuntu machines to other networked machines. I am using wins resolution and have checked settings in /etc/nsswitch.conf are the same as my working Ubuntu systems. What is different in Xubuntu networking that I might have missed?

  Read the article

• Silverlight 4 Twitter Client - Part 2

  - by Max

  We will create a few classes now to help us with storing and retrieving user credentials, so that we don't ask for it every time we want to speak with Twitter for getting some information. Now the class to sorting out the credentials. We will have this class as a static so as to ensure one instance of the same. This class is mainly going to include a getter setter for username and password, a method to check if the user if logged in and another one to log out the user. You can get the code here. Now let us create another class to facilitate easy retrieval from twitter xml format results for any queries we make. This basically involves just creating a getter setter for all the values that you would like to retrieve from the xml document returned. You can get the format of the xml document from here. Here is what I've in my Status.cs data structure class. using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes;  namespace MaxTwitter.Classes { public class Status { public Status() {} public string ID { get; set; } public string Text { get; set; } public string Source { get; set; } public string UserID { get; set; } public string UserName { get; set; } } }  Now let us looking into implementing the Login.xaml.cs, first thing here is if the user is already logged in, we need to redirect the user to the homepage, this we can accomplish using the event OnNavigatedTo, which is fired when the user navigates to this particular Login page. Here you utilize the navigate to method of NavigationService to goto a different page if the user is already logged in. if (GlobalVariable.isLoggedin())         this.NavigationService.Navigate(new Uri("/Home", UriKind.Relative));  On the submit button click event, add the new event handler, which would save the perform the WebClient request and download the results as xml string. WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp);  The following line allows us to create a web client to create a web request to a url and get back the string response. Something that came as a great news with SL 4 for many SL developers.   WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(TwitterUsername.Text, TwitterPassword.Password);  Here in the following line, we add an event that has to be fired once the xml string has been downloaded. Here you can do all your XLINQ stuff.   myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted);   myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml"));  Now let us look at implementing the TimelineRequestCompleted event. Here we are not actually using the string response we get from twitter, I just use it to ensure the user is authenticated successfully and then save the credentials and redirect to home page. public void TimelineRequestCompleted(object sender, System.Net.DownloadStringCompletedEventArgs e) { if (e.Error != null) { MessageBox.Show("This application must be installed first"); }  If there is no error, we can save the credentials to reuse it later.   else { GlobalVariable.saveCredentials(TwitterUsername.Text, TwitterPassword.Password); this.NavigationService.Navigate(new System.Uri("/Home", UriKind.Relative)); } } Ok so now login page is done. Now the main thing – running this application. This credentials stuff would only work, if the application is run out of the browser. So we need fiddle with a few Silverlioght project settings to enable this. Here is how:    Right click on Silverlight > properties then check the "Enable running application out of browser".    Then click on Out-Of-Browser settings and check "Require elevated trust…" option. That's it, all done to run. Now press F5 to run the application, fix the errors if any. Then once the application opens up in browser with the login page, right click and choose install.  Once you install, it would automatically run and you can login and can see that you are redirected to the Home page. Here are the files that are related to this posts. We will look at implementing the Home page, etc… in the next post. Please post your comments and feedbacks; it would greatly help me in improving my posts!  Thanks for your time, catch you soon.

  Read the article

• Make Your Own Paper-Craft Enigma Machine [DIY Project]

  - by Asian Angel

  If you love tinkering around with ciphers and want a fun DIY project for the upcoming weekend, then we have just the thing for you. Using common household items you can construct your own personal Enigma machine that will be completely compatible with all the settings of a real Enigma machine (models I, M1, M2 and M3). Visit the second link below for the step-by-step instructions and enjoy putting together this awesome DIY project! PDF Templates for the Enigma Machine Note: This is a direct link for the PDF file itself and the templates are sized for printing on 2 A4 sheets of paper. Enigma/Paper Enigma Instruction Homepage [via BoingBoing] HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• details on USB stick boot disk creation

  - by Deborah Shadovitz

  I am looking at this: http://www.ubuntu.com/download/help/create-a-usb-stick-on-ubuntu I need to create a boot disk to test Ubuntu to make sure it will run on a PC (Compaq Mini CQ10-120LA) I was given. I can create the boot disk off of a Mac (in English) or Windows (but Windows is in Spanish and foreign to me). Questions: 1) What format do I choose for the USB stick? (I wish the instructions stated this.) 2) What is Dash? (Will I know when I run the installer?) 3) Can I do this from a Mac or Windows computer? Or only from Ubuntu?

  Read the article

• Why are the colors worse on Ubuntu 12.04 than on Windows 7 on my Sony Vaio E-Series?

  - by Simon Hoare

  The colours look "lacking" and ever slightly blueish and rather washed-out and lacking in dimension. Graphics are ok - this page for example looks fine - but if I view something like a news site with high quality photos, the experience is not optimal and is noticeably inferior to Windows 7. Oddly, when I install Ubuntu as a VM on VirtualBox in Windows, the colours look as I expect them to. It's only on my dual-boot version of Ubuntu that they look wrong (not Wubi, although a previous Wubi-based installation had the same problem). Now, I have the proprietary ATI driver and I can use amdcccle to get the colours closer to what they should be, but I can't seem to do anything about colour depth. The depth settings in Xorg are all 24. I tried changing all three mentions of 24 to 32 but was forced into safety mode. Fortunately, I remembered where I'd been tinkering and got the file set back to 24.

  Read the article

• Dual monitor in Ubuntu 12.04 + Nvidia GPU with CUDA drivers?

  - by Aphex

  I'm thinking about setting up dual monitors on my desktop PC, running Ubuntu 12.04 with a Nvidia GTX 570. I use the GPU for CUDA programming so it's set up with the CUDA drivers. Is it possible/easy to set up dual monitors with this configuration? The only questions I saw related to this were for GPUs without cuda drivers. If anyone knows how dual monitors work with CUDA drivers, it would be much appreciated. It was enough of a pain getting everything running with the GPU and CUDA in the first place, I'd hate to ruin it all by attempting dual monitors.

  Read the article

• SQLAuthority News Virtual Launch Event for Office 2010 Contest Win MS Office License

  Office products are integral products of any PC. I accept that without Office Suites, I can not survive or make enough leaving. I am blogger and use word to create my blogs. I am SQL Server Trainer and I use PowerPoint as my presentation tool. I am SQL Server consultant and I use Excel to [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• Gnome 3 after run has graphic problems

  - by Antonis

  I have 3d accelarator but gnome still doesn't work My pc enters gnome desktop bu there i have graphic problems! Graphic problems with the top taskbar and wherever i click it, my desktop transforms into gnome clasic desktop. I am using ati radeon 4800 hd and ubuntu 11.10 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Similar report from @user26930 - ATI HD5770 graphics card - gnome-shell is affected but Unity works fine.

  Read the article

• The How-To Geek Guide to Audio Editing: The Basics

  - by YatriTrivedi

  Ever get the urge to edit some audio but you’re not sure where to start? Settle in with this HTG guide to the free audio editor Audacity that’s written for beginners but caters to geeks of all levels. Note: this is the first article in a multi-part series that we’ll be covering over the next few weeks Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

  Read the article

• Unity 5.1 audio issues (no sound in back channels)

  - by N0xus

  I've trying to bring in surround sound audio into my project. I've set my computer up to run in 5.1 and when I play a 6 channel audio through windows media player (it's a test audio that does left speaker, right speaker etc) it works fine. However, when I run it through Unity, all I get is the front 3 channels. I've set it in the Edit - project settings - audio to be 5.1 in there. I even set it in code with following: void Start() { AudioSettings.speakerMode = AudioSpeakerMode.Mode5point1; } How ever, when I run a debug line of: print ( AudioSettings.driverCaps); It tells me that Unity is only playing in stereo. Is there something I'm still not doing? I should also add I've ran 10 different tests using the 3D audio pan and spread options. I've set both to either being fully off, half way on and full. Still the same results.

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >