Search Results

Search found 68825 results on 2753 pages for 'problem'.

Page 369/2753 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• Cannot ping Google Public DNS on 8.8.8.8

  - by Tibor

  I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  (Moved here from StackOverflow) Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• flowchart for debugging a slow/unresponsive server

  - by davidosomething

  So the server is slow: Roll back to the previous known working build - Success? Code problem - Fail? Go on. Ping ip address - Success? maybe a DNS problem, go on. - Fail? Server or connection problem, go on. Ping and tracert your domain.com from inside your network - previous success - fail: DNS problem - success? go on. - previous fail and: - Fail? Go on, could be you or network. - Success? Go on. Try it from outside your network (http://centralops.net/co/) - Fail? The server's network connection sucks. - Success? If inside network was fail, your network sucks. Check the server load: CPU/RAM usage. Is it overloaded? - Yes. Who's the culprit? Kill some processes/reboot. - No? Go on. what other steps should i add?

  Read the article

• guest crash on long backup via rsync

  - by ToreTrygg

  I recently upgraded host to Ubuntu 9.10 with vmware server 2.0.2, i had two guest machine. One is a sme server i had several crash during a session of backup with rsync to another pc. Normal activities run regularly. The other guest is up without problem since 25 days. I found in the log a lot o f row like these Dec 20 05:29:27.445: vcpu-1| VLANCE: Ethernet0 skipped 2560 time(s) Dec 20 05:29:27.445: vcpu-1| VLANCE: 66 12 5 8 2 3 3 0 1 0 0 1 0 1 2 0 Dec 20 05:29:27.445: vcpu-1| VLANCE: 0 0 1 0 1 0 0 0 1 0 0 0 0 1 0 2452 Dec 20 05:29:27.651: vmx| ide0:0: Command WRITE(10) took 1.947 seconds (ok) Dec 20 05:29:37.945: vmx| ide0:0: Command WRITE(10) took 1.033 seconds (ok) when the vitual machine crash the log report, I paste here only some part to limit the lenght of the message Dec 27 01:48:05.686: Worker#2| Caught signal 6 -- tid 700 Dec 27 01:48:05.686: Worker#2| SIGNAL: eip 0x460422 esp 0xb124c024 ebp 0xb124c03 Dec 27 01:48:05.712: Worker#2| SymBacktrace12 00000000 eip 0x39d7ee in function clone in object /lib/tls/i686/cmov/libc.so.6 loaded at 0x2d1000 Dec 27 01:48:05.719: Worker#2| Unexpected signal: 6. Dec 27 01:48:05.720: Worker#2| Core dump limit is 0 KB. Dec 27 01:48:05.762: Worker#2| Child process 10455 failed to dump core (status 0 x6). Dec 27 01:48:05.762: Worker#2|SymBacktrace13 00000000 eip 0x39d7ee in function clone in object /lib/tls/i686/cmov/libc.so.6 loaded at 0x2d1000 Dec 27 01:48:05.779: Worker#2|Msg_Post: Error Dec 27 01:48:05.780: Worker#2|http://msg.log.error.unrecoverable VMware Server unrecoverable error: (Worker#2) Dec 27 01:48:05.780: Worker#2|Unexpected signal: 6. I have no idea how to solve the problem with this installation, I think to dowgrade the host to a version more compatible with vmware server 2. I read a lot of post about difficult of installation I think the problem of compilation during install could be related to my problem. Excuse me if the post isn't very clear, it's my first post here. Any help or suggest will be appreciated. Thanks

  Read the article

• Libvirt / QEmu Machine Fails and Refuses Restart Because of Memory Allocation Errors

  - by Elmar Weber

  I'm having a problem with libvirt. On a system restart all virtual machines (VMs) are started without a problem and keep running. Then at some point in time a set of machines shuts down according to their log. When I try to restart the machine, I'm getting an error that the memory allocation failed, although more than enough memory is free. server ~ # free total used free shared buffers cached Mem: 16176648 16025476 151172 0 285432 950300 -/+ buffers/cache: 14789744 1386904 Swap: 0 0 0 server ~ # virsh start zimbra error: Failed to start domain zimbra error: Unable to read from monitor: Connection reset by peer server ~ # tail -n 4 /var/log/libvirt/qemu/zimbra.log LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3072 -smp 2,sockets=2,cores=1,threads=1 -name zimbra -uuid d05ddb7a-83c4-a77b-d8bc-a322648520cf -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/zimbra.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/zimbra.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=19,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:21:a9:ad,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 192.168.1.2:25 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 Failed to allocate 3221225472 B: Cannot allocate memory 2012-07-06 08:42:56.076+0000: shutting down server ~ # uname -a Linux server 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system is a Ubuntu 12.04 server. The problem seems to occurs since the last restart, which was due to a number of package upgrades and a kernel upgrade. I tried booting with the previous kernel, the problem persists. I was not able to pinpoint an exact event when the machines fail, they do it at nearly the same time. The last time a duplicity job was running, this was not always the case however. Any suggestions on how to debug this? Best regards, elm

  Read the article

• VSFTPD - FTP over TLS - Upload stops after exactly 82k?

  - by Redsandro

  I installed a VSFTP daemon on a CentOS server, using a RSA certificate for logging in using explicit TLS. Now, I cannot upload more than 82k. With files under that limit, there is no problem. The FTP works like a charm. But as soon as a file reaches 82k with FileZilla (81,952 bytes to be exact), the transfer will stop, and the FTP client hangs until time out is reached. FTP client console: 15:10:21 Command: STOR jquery-1.7.2.min.js 15:10:21 Response: 150 Ok to send data. 15:11:21 Error: Connection timed out 15:11:21 Error: File transfer failed after transferring 82 KB in 60 seconds /var/log/vsftpd.log FTP command: Client "x.x.x.x", "STOR jquery-1.7.2.min.js" FTP response: Client "x.x.x.x", "150 Ok to send data." OK UPLOAD: Client "x.x.x.x", "jquery-1.7.2.min.js", 81952 bytes, 1.32Kbyte/sec FTP response: Client "x.x.x.x", "226 File receive OK." // NOT okay, file is bigger // No mention of error here I cannot find relevant info about this problem, apart from a possible problem with trans_chunk_size (not mentioned in default config), but I tried different sizes and it has no impact on the problem. trans_chunk_size=4096 trans_chunk_size=8192 trans_chunk_size=9999 Ofcourse, after every configuration change, I restarted the server: /etc/init.d/vsftpd restart What else can cause this? It's not the latest version, but it's the latest update within the repositories that has been deemed fit for enterprise usage: Package info: $ yum info vsftpd Loaded plugins: fastestmirror Installed Packages Name : vsftpd Arch : x86_64 Version : 2.0.5 Release : 24.el5_8.1 Size : 286 k Repo : installed Summary : vsftpd - Very Secure Ftp Daemon URL : http://vsftpd.beasts.org/ License : GPL Description: vsftpd is a Very Secure FTP daemon. It was written completely from scratch.

  Read the article

• Tracking down source of duplicate email messages in Outlook / Exchange environment

  - by Ken Pespisa

  I have a few users, who are also Blackberry users, that occasionally have duplicate emails generated from their "mailbox". I put mailbox in quotes because I'm not exactly sure where the duplicates are created. One of these users is in non-cached mode, and the other is in cached mode, and both experience the problem. In fact, the non-cached mode user was originally experiencing the problem while in cached mode, and I made the switch a few weeks ago to attempt to solve the problem. Today I discovered the issue still exists. I'm not sure if the fact that they are blackberry users could be causing the problem at all. I don't see how, but felt I should mention it anyway. Does anyone have ideas on how I might begin to troubleshoot this? I can see in the non-cached user's mailbox "Sent Items" that the message was sent only once. I confirmed the message does not state that there was a conflict and in fact that makes sense because they are in non-cached mode. On the server, we have a mail journaling feature turned on for our third-party mail archiving system, and I can see that that system sees two sent messages. And likewise, the recipient does in fact have two messages in their inbox with consecutive message IDs ([email protected]) and ([email protected]). It would seem to me that the duplicates are generated on the client, but is there a way to tell for sure?

  Read the article

• USPTO site asks for Quicktime Plug-in which I already have installed. Why?

  - by Kensai

  Whenever I try to watch the images of a patent in the USPTO site (example) using Firefox, the browser asks me to download the latest Quicktime, manually. This is totally strange because I already HAVE the latest plug-in (it even appears on my Firefox add-ons list). In the past I have only been able to see patent images using Safari. But never with Firefox. Is it a USPTO problem or a Mozilla one? Is there a way to fix the problem? edit: I can't see TIFF images neither with Internet Explorer (both 32-bit and 64-bit versions) nor with Chrome. All these browsers don't know how to open embedded TIFF images because they don't recognize the installed Quicktime plugin. A USPTO conspiracy to promote Safari? Come to think of it, I had this problem in my old computer as well. It had a 32-bit Vista OS, now I have 64-bit Windows 7. I hate TIFF and can't find Mozilla-specific information anywhere.. Arghh, am I the only one here with this freak problem?!

  Read the article

• Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

  - by Bryce Thomas

  I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

  Read the article

• Dell Studio 1555 not starting up

  - by Abhishek

  This is a 3-year-old laptop. I never had a big problem with it until now. I updated Kubuntu the night before yesterday. And Firefox got updated to version 18 and a few other related packages got updated. Then I shut down the laptop and restarted it, but it failed to start. I could hear the fan and the hard disk and the optical disk drive initialize. And the power button also lighted up. But there was no video - no POST or BIOS menu. I even opened the laptop up to the point when only the motherboard was the only thing attached to the base cover. I took it to the technician this evening. He checked it casually, and said that it might be a motherboard problem and will cost quite a bit to fix. Though he was not sure and said that he will give me a call after confirming the problem. Has anyone else had the same problem? What was it and what was the fix?

  Read the article

• Loss of network connectivity when playing video on Optoma HD180 projector

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas?

  Read the article

• Weird PCI bug: lots of missed packets, or data comes in "bursts"

  - by Thomas O

  I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

  Read the article

• How can I get VirtualBox to run at 1366x768?

  - by Joe White

  I'm trying to run Windows 8 in VirtualBox. My laptop's display is exactly 1366x768. Windows 8 disables some of its features if the resolution is less than 1366x768, so I need to run the guest OS fullscreen. The problem is, VirtualBox refuses to run the guest at 1366x768. When VirtualBox is "fullscreen", the guest is only 1360x768 -- six pixels too narrow. So there's a three-pixel black bar at the left and right sides of the display. This user had the same problem, but the accepted answer is "install the Guest Additions", which I've already done; that got me to 1360, but not to 1366. According to the VirtualBox ticket tracker, there used to be a bug where the guest's screen width would be rounded down to the nearest multiple of 8, but they claim to have fixed the bug in version 3.2.12. I'm using version 4.1.18 and seeing the same problem they claim to have fixed, so either they broke it again, they were wrong about ever having fixed it, or my problem is something else entirely. This answer suggested giving the VM 128MB of video memory, and claimed no problems getting 1366x768 afterward. When I created the VM, its display memory was already defaulted to 128 MB. I tried increasing it to 256MB, but with no effect: the guest is still six pixels too narrow. My host OS is Windows 7 64-bit, and I'm running VirtualBox 4.1.18. How can I get VirtualBox to run my guest OS fullscreen at my display's native resolution of 1366x768?

  Read the article

• Server 2012, Jumbo Frames - should I expect problems?

  - by TomTom

  Ok, this sound might stupid - but is there any negative on just enabling jumbo frames in practice? From what I understand: Any switch or ethernet adapter that sees a jumbo frame it can not handle will just drop it. TCP is not a problem as max frame size is negotiated in the setinuo phase. UCP is a theoretical problem as a server may just send a LARGE UDP packet that gets dropped on the way. Practically though, as UDP is packet based, I do not really think any software WOULD send a UDP packet larger than 1500 bytes net without app level configuration changes - at least this is how I do my programming, as it is quite hard to get a decent MTU size for that without testing yourself, so you fall back in programming to max 1500 packets. The network in question is a standard small business network - we upgraded now from a non managed 24 port switch to a 52 port switch with 4 10g ports (netgear - quite cheap) and will mov a file server to 10g for also ISCSI serving. All my equipment on the Ethernet level can handle minimum 9000 bytes and due to local firewalls I really want to get packets larger (less firewall processing), but the network is also NAT'ed to the internet. On top, different machines move around (download) large files (multi gigabyte area) quite often for processing. The question is - can I expect problems when I just enable jumbo frames? Again, this is not totally ignorance - I just don't see programs sending more than 1500 byte UDP packets (if that is a practical problem please tell me) and for TCP the MTU is negotiated anyway. if there is a problem I can move to a dedicated VLAN, but this has it's own shares of problems as basically most workstations must then be on both VLAN's.

  Read the article

• Printing on Windows 8 with PDF viewer (Adobe Reader) from network

  - by Bongo

  i have a problem with the Adobe Reader 8, but the problem seems to be equally bad with other pdf viewers. Here is the configuration: My PDF viewer is located on network drive "Z:" which is the network adress \dgs-main\progs. I tried to start the adobe reader from here - \\dgs-main\progs\Adobe\Reader 8.0\Reader\AcroRd32.exe and open the PDF from here - C:\Users\ServiceDesk\AppData\Local\Temp\GeneratedPDF.pdf The problem is as follows, if i open the PDF with a local PDF viewer everything works fine and i can print the document. If i open the PDF with the Network PDF viewer then it opens, but printing is impossible. The error message states: "Unable to start print job. Is printer available?" As mentioned above, it works with a local pdf viewer. In both cases i use the same printer. The Printer is a network printer but even with a local printer it fails. The error occurs only on Windows 8 machines. On windows 7 it works fine. I Hope somebody can tell me what the problem is. Thanks in advance and have a fine day.

  Read the article

• PC only boots from Linux-based media and won't boot from DOS-based media

  - by Xolstice

  I have this problem where the PC only seems to boot from a floppy disk or CD if it was created as a Linux-based bootable media. If it was created as a DOS-based bootable media the system just freezes at the starting point of the boot process. I originally asked this under question 139515 for CD booting only, and based on the given answers, I was under the impression the problem was with the CD-ROM drive; however, I have since installed a newly purchased CD-ROM drive and the same freezing occurs. This then made me try the DOS bootable floppy disk approach and I was quite surprised that it exhibited the same freezing problem. I then tried try a Linux bootable floppy and everything booted from it without any issues. As I mentioned in my original question, the PC was booting just fine from the DOS-based bootable CD, and then it suddenly decides to pull this freezing stunt. I can't remember if I changed anything in the BIOS settings that may I have caused the problem, but I am wondering if that could be the case - it is currently using the Award Module BIOS v4.60PGMA. Can anyone help?

  Read the article

• Wireless disconnects every 30 minutes

  - by Kez

  I have had a look through all the related questions and I get the feeling my problem is unique. My wireless connection disconnects every 30 minutes, for maybe 1 to 3 seconds. If I am browsing the web while it happens, I get the page cannot be displayed error message. I have checked the event logs as I was curious to know if there was anything in there. There is. Event 8033: BROWSER - The browser has forced an election on network \Device\NetBT_Tcpip_{B919CC30-25A9-45DD-A09F-549A6262FC9E} because a master browser was stopped. Reported exactly every 30 minutes which coincides with my wireless problem. I am running Windows 7 Ultimate, 32-bit. My wireless is Realtek RTL8187 integrated into a ASUS P5K-E/Wifi motherboard. It is on a workgroup and has never been on a domain. This problem does not affect any other computers. Wireless reception is great, and I have ensured that the wireless unit is transmitting on a frequency not used by any nearby wireless basestations. How can I fix this pesky problem?

  Read the article

• Why would my wireless cut in and out every minute or so?

  - by Strilanc

  I've been having problems with my wireless. I moved to a new apartment, and the wireless seems incredibly unreliable. Sometimes it will be stable for hours until, all of a sudden, it starts cutting in and out. I'll get 30-90 seconds of normal behavior, then 5-30 seconds of nothing, then repeat. Sometimes the connection will stop working entirely, until I power-cycle the router. It is extremely, extremely annoying. Surfing the web isn't too bad, assuming you can stand the random 5-30 second waits. But some connections are sensitive enough to timeout, and it certainly makes multiplayer games unplayable. Facts: I confirmed the problem using ping google.com -t. I get normal traffic, interspersed with bursts of "Request timed out.". I've never had this problem before with this laptop. I didn't bring my own router or modem to the apartment. I'm using what the old tenant had. Hooking directly to the modem via an ethernet cable results in a stable connection. Temporarily cutting power to the router sometimes fixes the problem. Sometimes it doesn't. I reset the router, but the problem remained. Apparently the previous tenant had issues with the internet, but I don't know what they were specifically. The router is a D-Link DIR-615, and their tech support is useless.

  Read the article

• how to setup .ssh directory inside an encrypted volume on Mac OSX and still have public key logins?

  - by Vitaly Kushner

  I have my .ssh directory inside an encrypted sparse image. i.e. ~/.ssh is a symlink to /Volumes/VolumeName/.ssh The problem is that when I try to ssh into that machine using a public key I see the following error message in /var/log/secure.log: Authentication refused: bad ownership or modes for directory /Volumes Any way to solve this in a clean way? Update: The permissions on ~/.ssh and authorized_keys are right: > ls -ld ~ drwxr-xr-x+ 77 vitaly staff 2618 Mar 16 08:22 /Users/vitaly/ > ls -l ~/.ssh lrwxr-xr-x 1 vitaly staff 22 Mar 15 23:48 /Users/vitaly/.ssh@ -> /Volumes/Astrails/.ssh > ls -ld /Volumes/Astrails/.ssh drwx------ 3 vitaly staff 646 Mar 15 23:46 /Volumes/Astrails/.ssh/ > ls -ld /Volumes/Astrails/ drwx--x--x@ 18 vitaly staff 1360 Jan 12 22:05 /Volumes/Astrails// > ls -ld /Volumes/ drwxrwxrwt@ 5 root admin 170 Mar 15 20:38 /Volumes// error message sats the problem is with /Volumes, but I don't see the problem. Yes it is o+w but it is also +t which should be ok but apparently isn't. The problem is I can't change /Volumes permissions (or rather shouldn't) but I do want public key login to work. First I thought of mounting the image on other place then /Volumes, but it is automaunted on login by standard OSX mounting. I asked about it here: How to change disk image's default mount directory on osx The only answer I got is "you can't" ;) I could hack my way around, by writing some shellscript that will manually mounting volume at a non-standard location but it would be a gross hack, I'm still looking for a cleaner way to do what I need.

  Read the article

• GitLab post-receive hook not firing

  - by Ben Graham

  Apologies if this isn't the right stackexchange. I have a GitLab install. It was installed over the top of a gitolite install that was only a few days old, and I assume this non-standard setup is at the root of my problem, but I cannot pin it down. The problem is straightforward: post-receive hooks are not fired. This prevents 'project activity' appearing in GitLab. The problem looks like: $ git push #... error: cannot run hooks/post-receive: No such file or directory Hook Exists The post-receive hook/symlink exists and is executable: -rwxr-xr-x 1 git git 470 Oct 3 2012 .gitolite/hooks/common/post-receive lrwxrwxrwx 1 git git 45 Oct 3 2012 repositories/project.git/hooks/post-receive -> /home/git/.gitolite/hooks/common/post-receive It's Executable By GitLab The gitlab user can execute the script (I have removed the /dev/null redirect and fed in blank input to get an 'OK' as output): sudo su - gitlab -c /home/git/.gitolite/hooks/common/post-receive OK GitLab Can Find It GitLab is looking for hooks in the correct location: $ grep hooks /srv/gitlab/gitlab/config/gitlab.yml hooks_path: /home/git/.gitolite/hooks/ and $ bundle exec rake gitlab:app:status RAILS_ENV=production # ... /home/git/.gitolite/hooks/common/post-receive exists? ............YES Environment The env -i line in the hook is commonly cited as an issue. I think that would occur after this problem, but for completeness, redis-cli is found OK: $ env -i redis-cli redis> I've run out of debugging ideas on this one. Does anybody have any suggestions?

  Read the article

• SVN, Samba and Symbolic Links. How to get them all to play together?

  - by Camsoft

  I've got a website project under version control that relies on files from an unversioned directory on the same server via Symbolic Links. I'm currently storing the symbolic links in the repository. The idea is that if someone checks out a working copy on to the same server they can edit and test the working copy of the project before committing it back to the repository. When they checkout their working copy it successfully sets up the symlinks so that the entire site works when testing. The users that work on the project are Windows users, so I've set a samba shares on the server and then mapped them to network drives in Windows. People can edit their working copies directly on the server via network shares and then test them in the web browser before committing their changes back to the repository via TortoiseSVN. The Problem The problem I have is that Samba resolves the symlinks as expected but when a user tries to commit their changes back to the repository, TortoiseSVN thinks the linked files are part of the project and tries to commit the target files to the repository and not the symlinks themselves. I tried turning off symlink support in samba which means that the linked files cannot be resolved as I don't really want people to have access to the linked files nor do I want to import the linked files in the repository. The problem with this is that I get Can't stat '\webserver\projects\working\project\symlinked_file.php'. Access is denied Apart from the symlink problem everything else works 100% perfectly. Users can either checkout website projects to their machine and work on them (but can't test) or checkout them out to their space on the dev web server and work on them and fully test. So I don't want to change the workflow process, I just need a solution to the symbolic link issue. Many thanks. Originally posted on StackOverflow: http://stackoverflow.com/questions/2400917/svn-samba-and-symbolic-links-how-to-get-them-all-to-play-together

  Read the article

• Adventures in Drupal multisite config with mod_rewrite and clean urls

  - by moexu

  The university where I work is planning to offer Drupal hosting to staff/faculty who want a Drupal site. We've set up Drupal multisite with clean urls and it's mostly working except for some weird redirects. If you have two sites where one is a substring of the other then you'll randomly be redirected to the other site. I tracked the problem to how mod_rewrite does path matching, so with a config file like this: RewriteCond %{REQUEST_URI} ^/drupal RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /drupal/index.php?q=$1 [last,qsappend] RewriteCond %{REQUEST_URI} ^/drupaltest RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /drupaltest/index.php?q=$1 [last,qsappend] /drupaltest will match the /drupal line and all of the links on the /drupaltest page will be rewritten to point to /drupal. If you put the end of string character ($) at the end of each rewrite condition then it will always match on the correct site and the links will always be rewritten correctly. That breaks down as soon as a user logs in though because the query string is appended to the url so just the base url will no longer match. You can also fix the problem by ordering the sites in the config file so that the smallest substring will always be last. I suggested storing all of the sites in a table and then querying, sorting, and rewriting the config file every time a Drupal site is requested so that we could guarantee the order. The system administrator thought that was kludgy and didn't address the root problem. Disabling clean urls should also fix the problem but the users really want them so I'd prefer to keep them if possible. I think we could also fix it by using an .htaccess file in each site to handle the clean url rewriting but that also seems suboptimal since it will generate a higher load on the server and the server is intended to host the majority of the university's external facing web content. Is there some magic I can do with mod_rewrite to get it to work? Would another solution be better? Am I doing something the wrong way to begin with?

  Read the article

• White Screen, No Errors.

  - by GruffTech

  So.. Interesting problem for you guys, As I'm completely lost as to what to do, or where to take the next step. Server & Application Environment. CentOS release 5.3 (Final) Apache 2.2.3-22 EnableSendfile off EnableMMAP off ErrorLog logs/error_log LogLevel debug PHP-5.2.6-2 error_reporting = E_ALL display_errors = on log_errors = on max_execution_time=300 max_input_time=60 memory_limit=512mb Kohana 2.3 PHP Environment. HAProxy 1.3.15.6-2 MemCacheD 1.2.6-1 Our application is split between 3 web servers, mounting a NFS Storage server, and sticky load balancing between the 3 web servers. The application seemingly runs great, but every so often, instead of loading, the application just shows a pure white page. Not a 404 Error, or a 500 Server Error, a clean white page. And it returns instantly, so its not a execution time error. Nothing in the Error log, or Server-Error Log, Proxy log shows standard proxied connection, Just the standard 200-Status in Access log, with 256 bytes transferred. To me, this leads to tell me that the application itself is having a problem. A rare, unexplainable, seemingly random, problem that causes what we've now called the "White Screen of Death." Our developers all say that since there is nothing going to our error logs, that it must be a server problem. But I say the same thing, There's nothing going to ANY of our logs (relevent to this anyway), and we're not having httpd children crash from what i can tell. Any ideas on how i can increase my logs, or somehow prove that its not a bug in PHP, Apache, CentOS, ect? Or if it is somehow a bug, identify it?

  Read the article

• Software to monitor bill payment to mission critical IT service providers (ISP, DNS etc.)

  - by Sholom

  Hi All, The Problem: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: Windows XP Professional with Service Pack 3, all updated Program that sends UDP datagrams Program that receives UDP datagrams Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas?

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >