Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 369/808 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • CodePlex Daily Summary for Monday, October 31, 2011

    CodePlex Daily Summary for Monday, October 31, 2011Popular ReleasesWindows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.24: New features in the 1.24 release: - Added MFI indicatorPROFIT: 1.1.0.102: Removed Attributes from agent and extensions Updated Modules with last data Added Elite T2 and T4 modules Modified sensor strength calculation to reflect ECCM module changesBF3Rcon.NET: BF3Rcon 3.0: This release is targeted for RCON documentation based on R3. Everything should be beta stable, but it's alpha because I haven't been able to fully test it. When a stable release is ready, a proper changelog will be kept. Important Edit: There's one method that will keep this from working in Mono. GeneratePasswordHash uses void HashAlgorithm.Dispose(), which isn't in Mono. This will have to be changed to Clear() in the next release. If anyone needs a Mono version of this immediately, you can...BoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.Home Access Plus+: v7.6: This download now (31/10/11 6pm) includes the v7.6.1031.1800 patch Changes: New Download Routing Handler: Support for Pausing/Resuming Downloads Should fix OfficeOpenXML files when you download and it corrupts Update MyFiles ALPHA: Updated Layout of some elements on the tiles Details View Added with a table Update Booking System: Fixed some issues found since the v7.5 release Added support for spaces in Resource names Fixed some issues with the Booking System Admin page Added SI...Koober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...WriteableBitmapEx: WriteableBitmapEx 0.9.8.5: Added a Rotate method for arbitrary angles (RotateFree). Provided by montago. See http://writeablebitmapex.codeplex.com/workitem/15214 Added Nokola's anti-aliased line drawing implementation. http://nokola.com/blog/post/2010/10/14/Anti-aliased-Lines-And-Optimizing-Code-for-Windows-Phone-7e28093First-Look.aspx Updated the Windows Phone project to WP 7.1 Mango. Added an extension file for the Windows Phone specific extensions and added the SaveToMediaLibrary extension including support fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????,??????????????????????,???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????,???????????、?????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ?? v3.6?? ??“????”...Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Now the the SMinimum and SMaximum par...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngNicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)New ProjectsagsXMPP-facebook: This is a fork of agsXMPP library (http://www.ag-software.de/agsxmpp-sdk/) that brings support for X-FACEBOOK-PLATFORM SASL mechanism. Tags: xmpp, facebook, chat, agsxmpp, .net, C#Azure Toss: With the booming of personal devices (such as iPad and Windows 8 tablets) and cloud-based services (such as Azure and iCloud), we are entering an era of highly connected yet very loosely coupled applications and services. As ISVs and application developers, you’ll find your applications need to communicate with many other applications and services in a “non-binding” way - there are no hard commitments among the applications and services to work together. Instead, services and features are dis...Backup MS Outlook: Console program to copy all active (usage) pst files from default Microsoft Outlook to backup folder. It's stripped down and modified version of the program backupmymail.codeplex.com. Program to copy file using VSS (Volume shadow service) through hobocopy(c) program.BoxWorld: Welcome to BoxWorld. Also known as Sokoban. This application/game was designed as an experiment really! I remember playing this game on my graphing calculator many years ago. And even with this, it's not so much as the game as it was making the game.com-binbin-reader: rss reader Priority Inbox Spam Custom CssLink control for the wiki pages of a SharePoint 2010 team site: Replace the native CssLink by this custom control for removing the OOTB RTE styles in a wiki page of SharePoint 2010 Foundation. This custom control wraps the native one in order to remove the link to the OOTB corev4.css that remains in the wiki pages while using an alternate CSS. Droppoint: Drop your file to sharepointEvents&Handlers: Implementing example for events and handlers in CLR via C#KIVA AIP for C# 4: A C#4 API implementation of the KIVA API found at http://build.kiva.org/apiKKScada: KKScada is a scada projectKoober: Koober is a .NET framework based visually appealing Ebook creator for Windows. It has a pre defined format using SQLite database as book files. Lighter: Text to Braille: Lighter is an extensible and flexible Thai/English and further language translation to Braille format.Lynx Toolkit: A collection of small command line developer tools.Michael's Code: this is michael's code.Passwords Thief: Sometimes you need to see what is behind asteriks in password edit box. It will help you to resolve this problem. PET@runtime: PET@runtime provides additional components to PET, especially for supporting PET outcomes at project execution time in several tools, e.g. Word or TFS.ProduzioneWebFlora: cascascaResources Over MVC: Resources Over MVC provides extensions for ASP.Net MVC to support the typical features of a REST web service. These include support for multiple representations, encodings and a number of ways of overloading POST. Regardless of your opinion of what makes a RESTful service, these can help.Servelat Pieces: Servelat Pieces is a collection of reusable bits of code that can make you Silverlight development easier. You'll be able to simplify the code which consumed server-side WCF services. It may greatly simplify your Sillverlight unit testing experience.Silverlight Sphere Control: This is a Silverlight spherical selection control that I built that uses the projection transformations in Silverlight. It includes several modes (including random, rows, columns, vertical carousel, horizontal carousel, and checkered) and events. Upon selecting one of the elements (which are arranged in a spherical pattern, hence the name), the sphere rotates until the control is at the front face of the sphere. Events are available to hook into (on element selected, rotation finished,...WinRT File Based Database: This database is based on a file system in Windows 8 and is using WinRT (Windows Runtime) in Windows 8 environment and thus can be used for Metro style applications. It includes simple, yet effective API that allows you to create tables based on classes. xianshihai--nothing to display: nothing to display

    Read the article

  • CodePlex Daily Summary for Sunday, October 30, 2011

    CodePlex Daily Summary for Sunday, October 30, 2011Popular ReleasesKoober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.?????????????: ??????????????: ??????????????VidCoder: 1.2.0: Updated to HandBrake svn 4311. Refactored to read in list of encoders from HandBrake itself. Added ffaac, FLAC audio and ffmpeg2 video. Reworked audio encoding UI: removed grid and gave each encoding more vertical space. Added audio quality targeting and compression. Added status messages. Added messages for a few events (encode start/stop, playing a preview clip, update available, update download finished). Made source and destination path UI elements smarter about what parts they cut ...patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Folder Bookmarks: Folder Bookmarks 2.2.0.1: In this version: Custom Icons - now you can change the icons of the bookmarks. By default, whenever an image is added, the icon is automatically changed to a thumbnail of the picture. This can be turned off in the settings (Options... > Settings) Ability to remove items from the 'Recent' category Bugfixes - 'Choose' button in 'Edit Bookmark' now works Another bug fix: another problem in the 'Edit Bookmark' windowMedia Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.Image Converter: Image Converter 0.3: New Features: - English and German support Technical Improvements: - Microsoft All Rules using Code Analysis Planned Features for future release: 1. Unit testing 2. Command line interface 3. Automatic UpdatesAcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????,??????????????????????,???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????,???????????、?????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ?? v3.6?? ??“????”...Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Now the the SMinimum and SMaximum par...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)NDepend TFS 2010 integration: version 0.5.0 beta 1: Only the activity and the VS plugin are avalaible right now. They basically work. Data types that are logged into tfs reports are subject to change. This is no big deal since data is not yet sent into the warehouse.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...DotNetNuke® FAQ: 05.00.00: FAQ (Frequently Asked Questions) 05.00.00 will work for any DNN version 5.6.1 and up. It is the first version which is rewritten in C#. The scope of this update is to fix all known issues and improve user interface. Please review and rate this release... (stars are welcome)BUG FIXESManage Categories button text was not localized Edit/Add FAQ Entry: button text was not localized ENHANCEMENTSAdded an option to select the control for category display: Listbox with checkboxes (flat category ...New ProjectsalphaCards: Digitale LernkarteiBinary Code Interpreter: The Binary Code Interpreter is a small and funny programming languaage. This interpreter works a bit like a Turing Machine.Buscar ciudades: This is the source code for the application "Buscar ciudades" published in the Windows Phone Marketplace. CamOnWeb - Componente para WebCam: Este projeto tem como objetivo o desenvolvimento um componente para captura e exibição de videos da webcam. Compare.Net: Compare.Net is a configurable application to compare and reconclie from different sources. C# WPF applcation targeting .Net 4CSGame: Academic project for our studies. Subject "Client -server technology"curbside: curbsideDanish Language Pack for Community Server: Danish Language Packs for Community Server 2.1 and 2007. At its inception, this project contains quite incomplete translations to Danish. This project provides a common resource where all interested parties can gradually improve on this language pack. Please join to improve the contents. The source code tree contains two major folders: One for Community Server 2.1 and one for Community Server 2007.Dependency Variable Lib: ??????????????????、?????????????????????。(???????、?????????????w) ???、「??×??=??」???????????????、????????、????????、???「??×??」????????????????????????????????????。 FreedBack: FreedBack allows you to quickly and easily embed a configurable feedback form into any web application. It can be a standalone application that you install and deploy, then embed a bit of script into existing apps to implement feedback, or you can make it part of your MVC App.Hageveld - NieuwsModule (Chris' Tutorial: A news article manager made for educational purposes.Idea Resto: Aplicación para restaurantes.jqgridmvcgeneration: codesmith template that creates js, html and asp.net mvc server side json server for a jqgrid -based table on a arbitratrary database table. The code includes pagination and server side sorting. Jqgrid is a great jquery extension that provides an ajax-enabled fully customizable interactive table based on server side data. However, the actual coding can be a bit tedious and cryptic. This project provides a template base approach that basically performs two tasks: 1. creates a client si...MyClassMapper: A simple configurable classmapper for mapping ClassA to ClassB and vice versa, the ideas are borrowed from the Dozer project (http://dozer.sourceforge.net). Most code is based on 'Dynamic Access' code from Hongju Cao <hjcao_wei@hotmail.com> (All that code is located in the "DynamicAccess" sub-directory from the project.)NavigateTo Providers: This project is a collection of NavigateTo providers for Visual Studio 2010. NObsidian: A proxy component to access Obisidian Portal API from .NetNSession: The objective of this project is to allow ASP Classic to access ASP.NET out-of-process session stores in the same way that ASP.NET accesses them, and thus share the session state with ASP.NET.NTextile: NTextile is a lightweight, humane web compatible markup generator. It generates valid XHTML output using simple easy to remember conventions and text characters (a.k.a modifiers), to markup plain text. NTextile is especially useful to provide quick and valid markup for .NET web applications. For e.g. wikis, blogs, online forums, content management systems etc. This project was inspired by Dean Allen’s original Textile features, as included in the Textpattern content management application. T...OpenTasksBehaviorsLibrary for Windows Phone: Open Tasks Behavior for Windows Phone *OpenWebBrowserTask *OpenMediaLauncherTaskPowerShell Cmdlet Sample: PowerShell Cmdlet SamplePrismEx: PrismEx is a library of helpers and extension methods to allow developers to more easily develop and test Prism applications. QuickDelete: A Windows Explorer add-on to delete files and folders very quickly, much more so than the usual Explorer command. Works on Windows XP or later. Currently in EXPERIMENTAL state. No releases have been produced yet.Quiz Module for DotNetNuke: This is a module that allows you to quickly and easily provide a quiz that can be taken by the visitors on your DotNetNuke website.RaptorDB - The Key Value Store: Smallest, fastest embedded nosql persisted dictionary using b+tree or MurMur hash indexing. (Now with Hybrid WAH bitmap indexes)Rockin CMS-LMS Combo: RockinCmsLms Combo provides a great way for users to build their content and training sites with one great tool. It will be developed with C# 4.0-4.5, Silverlight, JQuery, and ASP.Net and MVC 3.0 with Razor. This project will demonstrate how to use todays technologies to build solutions that last. We may have 2 versions - one with a local db and one with a Windows Azure storage solution. Suggest using the Web Platform Installer to get all of the components.SandKeeper - Time Tracking Addin for Outlook 2010 tasks: SandKeeper is an Outlook Addin that enables you to track time for your tasks.Share: Share is a new web-based content management system. For more information about this project, please visit http://blog.aphysoft.com.SharePoint 2010 ViewEdit Group By Content Type: A simple project that injects JavaScript into the ribbon bar area to add "Content Type" as a choice on the ViewEdit.aspx page. With this, users can once again create views that group by Content Type without having to use SharePoint Designer 2010.Simple Merge Sort: This is a simple implementation of Merge-Sort, using to sort an Array of Integers.UKag: Unity3D?Kr2/KAG3??moduleUsingLinq: TestUtec Logger: Utec Logger is meant to be used the Turbo XS UTEC and UTEC Delta. It is simply a data logger application, it will auto logged based on pre defined conditionals. It also takes this information and displays it in a two dimensional table, averaging the values appropriately to ease of log analysis.WOXalizer: Fork of WOX project. http://woxserializer.sourceforge.net/Zeta Backup Validator: A small .NET 3.5 console application that helps you verifying whether your backups succeed by checking files and folders with various configurable rules (folder size, file age, etc.).Zeta Links: A web application for generating and measuring shortcut hyperlinks, similar to bit.ly.Zombie Slayer v1.0: Zombie Slayer v1.0 is an action first person shooter where players can try and survive a never-ending wave of zombies for as long as they can while a timer keeps track of how long they survived and posts times online from longest to shortest.?????????????: ??????????????????,????。

    Read the article

  • Bridged virtual interface is not available or visible to ifconfig.

    - by Omniwombat
    Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

    Read the article

  • Web Interfaces not opening even after Port Forwarding is said to be working!

    - by Ahmad
    I'm encountering this strange problem which has baffled me to the ground, and which I haven't encountered even after years of doing port forwarding .. ! I am hoping somebody here can help me solve this mystery .. :) My network configuration is as follows: I have a DSL modem (custom made and branded by my ISP) which is receiving a DSL stream ... it has an external IP which is visible to the world, say, 11.22.33.44 ... This modem has DHCP enabled, has an internal IP for itself, which is 192.168.1.1 .. it is connected to 2 laptops via and ethernet cable .. Laptop 1 has IP 192.168.1.2, and Laptop 2 has IP 192.168.1.3 ... On Laptop 1, two applications are running, jDownloader and Media Player Classic, which have their web interfaces on ports 8765 and 13579, respectively ... I can access both of these web interfaces from Laptop 2 by opening these addresses: 192.1681.2:8765 and 192.168.1.2:13579 ... both of their web interfaces open up, meaning the web interfaces are working fine .. Moving on, I now want to access these web interfaces from outside my network as well, and so I've configured port forwarding in my PTCL modem to forward all traffic on ports between 8000 and 14000 (both TCP and UDP) to IP 192.168.1.2 ... I have verified that port forwarding is working by testing it using PortForward.com's port checker tool, and this website too: [URL]http://www.yougetsignal.com/tools/open-ports/[/URL] When I use the website, if I'm running the applications on Laptop 2, the website reports that the port is open .. if I then close the application, the website reports the port is closed ... This makes sense as nothing is listening on my machine in the latter case .. Also, if I disable port forwarding in my modem, again, the website reports the port is closed ... so, the website's results seem to be okay ... Same of the above can be said when I'm used PortForward.com's port checker tool ... So again, everything okay so far ... Now, here comes the problem !! ... Despite the above tools reporting that port forwarding is working, I am unable to open the web interfaces from outside my network ... So for example, if I tried to browse 11.22.33.44:8765 or 11.22.33.44:13579, nothing opens in my browser ... But if I accessed these web server's locally from Laptop 3, by typing in 192.168.1.2:8765 or 192.168.1.2:13579, they opened ... So where is the problem here ?? The tools report unanimously that port forwarding is working, and yet I am unable to open the web interfaces from outside the network .. Also note that I have disabled the firewall from my computer, and have also made sure that any option in the above programs (whose web interfaces I am trying to open) that says only local connections are to be accepted, is disabled ... So whats the problem ... ?!! Any ideas ??

    Read the article

  • KVM + Cloudmin + IpTables

    - by Alex
    I have a KVM virtualization on a machine. I use Ubuntu Server + Cloudmin (in order to manage virtual machine instances). On a host system I have four network interfaces: ebadmin@saturn:/var/log$ ifconfig br0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 inet addr:192.168.0.253 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::1278:d2ff:feec:1638/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:589337 errors:0 dropped:0 overruns:0 frame:0 TX packets:334357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:753652448 (753.6 MB) TX bytes:43385198 (43.3 MB) br1 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16995 errors:0 dropped:0 overruns:0 frame:0 TX packets:13309 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2059264 (2.0 MB) TX bytes:1763980 (1.7 MB) eth0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:610558 errors:0 dropped:0 overruns:0 frame:0 TX packets:332382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:769477564 (769.4 MB) TX bytes:44360402 (44.3 MB) Interrupt:20 Memory:fe400000-fe420000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:239632 errors:0 dropped:0 overruns:0 frame:0 TX packets:239632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50738052 (50.7 MB) TX bytes:50738052 (50.7 MB) tap0 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17821 errors:0 dropped:0 overruns:0 frame:0 TX packets:13703 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:2370468 (2.3 MB) TX bytes:1782356 (1.7 MB) br0 is connected to a real network, br1 is used to create a private network shared between guest systems. Now I need to configure iptables for network access. First of all I allow ssh sessions on port 8022 on the host system, then I allow all connections in state RELATED, ESTABLISHED. This is working ok. I install another system as guest, it's IP address is 192.168.10.2, and now I have two problems: I want to allow the access from this host to the outside world, cannot accomplish this. I can ssh from the host. I want to be able to ssh to the guest from the outside world using 8023 port. Cannot accomplish this. Full iptables configuration is following: ebadmin@saturn:/var/log$ sudo iptables --list [sudo] password for ebadmin: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:8022 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED LOG all -- anywhere anywhere LOG level warning Chain FORWARD (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning Chain OUTPUT (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning ebadmin@saturn:/var/log$ sudo iptables -t nat --list Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp spt:8023 to:192.168.10.2:22 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination The worst of all is that I don't know how to interpret iptables logs. I don't see the final decision of the firewall. Need help urgently.

    Read the article

  • Performance of Cluster Shared Volume file copy from SAN

    - by Sequenzia
    I am hoping someone can help me out with a strange issue. We are running a Microsoft Failover Cluster with Server 2008 R2 and an Equallogic PS4000 SAN. Our main configuration has 2 Dell Poweredge T710 Servers in the cluster. We have CSV and Quorm setup. The servers each have 10 Broadcom 1Gb NICs. Right now 4 of the NICS are on the iSCSI network for accessing the SAN. They use MPIO and the Dell HIT pack. We have 5 VMs running on each node and everything runs smooth. No noticeable performance issues or anything. From the SAN I can see the 4 iSCSI connections from each server to each volume (CSV and Quorm). Again, it seems to perform great. The problem I am running into is with backups. I have tried a few backup programs like backupchain and Veeam. The problem is both of them are very very slow to backup the VMs. For instance I have a 500GB (fixed disc) VHD that’s running on the cluster. It takes over 18 hours to backup that VHD and that’s with compression and depuping turned off which is supposed to be the fasted. We also have a separate server that is just for backups. It has a lot of directed attached storage. As part of the troubleshooting I decided to bring that server into the cluster as a node. It now has access to the CSV and can read from C:\clusterstorage\volume1 which is where our VHDs live. This backup server only has 2 NICs. 1 NIC is going to the iSCSI network and the other is just on the main network. It has Intel NICS in it without any sort of MPIO or teaming. So with the 3rd server now in the cluster I started doing some benchmarking. I have a test VHD that’s about 7GBs that’s stored in the CSV. I have tested file copying that VHD from all 3 servers to directed attached storage in the respective server. The 2 Dell servers that are the main nodes in the cluster (they house the VMs) are reading that file at about 20Mbs/Sec. Which at that rate is way to slow for the backups. The other server which only has 1 NIC to the SAN is reading at around 100Mbs/Sec. I spent a few hours on the phone with Dell today about this . We went through all kind of tests and he was pretty dumb founded. He really has no idea why that server with only 1 NIC is reading about 5 times as fast as the servers with 4 NICS and MPIO. We looked at the network utilization of the NICs while the file copy was going on. The servers with the 4 NICs had a small increase of activity during the file copy but they only went up to around 8-10% on all 4 NICs. The other server with the 1 NIC jumped up to over 80% during the file copy. I plan on doing some more testing after hours and calling Dell back tomorrow but I really am confused (and so is Dell’s support rep) why I cannot get faster file copy access to the CSV on those servers. Anyone have any input on this? Any feedback would be greatly appreciated. Thanks in advance.

    Read the article

  • Setting up home DNS with Ubuntu Server

    - by Zeophlite
    I have a webserver (with static IP 192.168.1.5), and I want to have my machines on my local network to be able to access it without modifying /etc/hosts (or equivalent for Windows/OSX). My router has Primary DNS server 192.168.1.5 Secondary DNS server 8.8.8.8 (Google's public DNS). Nginx is set up to server websites externally as *.example.com Internally, I want *.example.local to point to the server. My webserver has BIND9 installed, but I'm unsure of the settings. I've been through various contradicting tutorials, and so most of my settings have been clobbered. I've stripped out the lines which I'm confused about. The tutorials I looked at are http://tech.surveypoint.com/blog/installing-a-local-dns-server-behind-a-hardware-router/ and http://ubuntuforums.org/showthread.php?t=236093 . They mostly differ on what should be put in /etc/bind/zones/db.example.local and /etc/bind/zones/db.192, so I've left the conflicting lines out below. Can someone suggest what the correct lines are to give my above behaviour (namely *.example.local pointing to 192.168.1.5)? /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.254 /etc/hostname avalon /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local zone "example.local" { type master; file "/etc/bind/zones/db.example.local"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.192"; }; /etc/bind/zones/db.example.local $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 5 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL /etc/bind/zones/db.192 $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 4 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; What do I need to add to the above files so that on a laptop on the internal network, I can type in webapp.example.local, and be served by my webserver? EDIT I made several changes to the above files on the webserver. /etc/network/interfaces (end of file) dns-nameservers 127.0.0.1 dns-search example.local /etc/bind/zones/db.example.local (end of file) @ IN NS avalon.example.local. @ IN A 192.168.1.5 avalon IN A 192.168.1.5 webapp IN A 192.168.1.5 www IN CNAME 192.168.1.5 /etc/bind/zones/db.192 (end of file) IN NS avalon.example.local. 73 IN PTR avalon.example.local. As a side note, my spare Win7 machine was able to connect directly to webapp.example.local, but for a Ubuntu 13.10 machine, I had to make the following changes as well (not on the webserver, but on a separate machine): /etc/nsswitch.conf before hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 after hosts: files dns /etc/NetworkManager/NetworkManager.conf before dns=dnsmasq after #dns=dnsmasq The issue remains that its not wildcard DNS, and so I have to add entries to /etc/bind/zones/db.example.local for webapp1, webapp2, ...

    Read the article

  • IIS 7 Authentication: Certain users can't authenticate, while almost all others can.

    - by user35335
    I'm using IIS 7 Digest authentication to control access to a certain directory containing files. Users access the files through a department website from inside our network and outside. I've set NTFS permissions on the directory to allow a certain AD group to view the files. When I click a link to one of those files on the website I get prompted for a username and password. With most users everything works fine, but with a few of them it prompts for a password 3 times and then get: 401 - Unauthorized: Access is denied due to invalid credentials. But other users that are in the group can get in without a problem. If I switch it over to Windows Authentication, then the trouble users can log in fine. That directory is also shared, and users that can't log in through the website are able to browse to the share and view files in it, so I know that the permissions are ok. Here's the portion of the IIS log where I tried to download the file (/assets/files/secure/WWGNL.pdf): 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bullet.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bgOFF.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:21 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 2 5 0 2010-02-19 19:47:36 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 0 2010-02-19 19:47:43 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:46 xxx.xxx.xxx.xxx GET /manager/media/script/_session.gif 0.19665693119168282 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 203 2010-02-19 19:47:46 xxx.xxx.xxx.xxx POST /manager/index.php - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 296 2010-02-19 19:47:56 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:59 xxx.xxx.xxx.xxx GET /favicon.ico - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 404 0 2 0 Here's the Failed Logon attempt in the Security Log: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 2/19/2010 11:47:43 AM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: WEB4.net.domain.org Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: jim.lastname Account Domain: net.domain.org Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: 10.5.16.138 Source Port: 50065 Detailed Authentication Information: Logon Process: WDIGEST Authentication Package: WDigest Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2010-02-19T19:47:43.890Z" /> <EventRecordID>2276316</EventRecordID> <Correlation /> <Execution ProcessID="612" ThreadID="692" /> <Channel>Security</Channel> <Computer>WEB4.net.domain.org</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">jim.lastname</Data> <Data Name="TargetDomainName">net.domain.org</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc000006a</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">WDIGEST</Data> <Data Name="AuthenticationPackageName">WDigest</Data> <Data Name="WorkstationName">-</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">10.5.16.138</Data> <Data Name="IpPort">50065</Data> </EventData> </Event>

    Read the article

  • Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

    - by DragonLord
    One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

    Read the article

  • OpenVPN Bridge LAN-to-LAN Configuration?

    - by Shad Reese
    I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

    Read the article

  • Powershell Win32_NetworkAdapterConfiguration Not "seeing" PPP Adapter

    - by Ben
    I am trying to get the IP of a PPP VPN network connection, but Win32_NetworkAdapterConfiguration does not seem to "see" it. If I interrogate all adapters using my script, it will see everything but the PPP VPN adapter. Is there a specific filter or something I need to enable, or do I need a different class? My Script: $colItems = Get-wmiobject Win32_NetworkAdapterConfiguration foreach ($objItem in $colItems) { Write-Host Description: $objItem.Description Write-Host IP Address: $objItem.IPAddress Write-Host "" } Script Output: Description: WAN Miniport (SSTP) IP Address: Description: WAN Miniport (IKEv2) IP Address: Description: WAN Miniport (L2TP) IP Address: Description: WAN Miniport (PPTP) IP Address: Description: WAN Miniport (PPPOE) IP Address: Description: WAN Miniport (IPv6) IP Address: Description: WAN Miniport (Network Monitor) IP Address: Description: Intel(R) PRO/Wireless 3945ABG Network Connection IP Address: 192.168.2.5 Description: WAN Miniport (IP) IP Address: ipconfig /all output: PPP adapter My VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : My VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.1.8.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.1.1.3 10.1.1.2 Primary WINS Server . . . . . . . : 10.1.1.2 Secondary WINS Server . . . . . . : 10.1.1.3 NetBIOS over Tcpip. . . . . . . . : Enabled Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Belkin Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-3F-3C-22-22-22 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.5(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 25 May 2010 20:33:19 Lease Expires . . . . . . . . . . : 22 May 2020 20:33:17 Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DNS Servers . . . . . . . . . . . : 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled Thanks in advance, Ben

    Read the article

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • Advice on networking career

    - by fmysky
    Hello! I need some insights on a networking career. I have a valid CCNA and few months of experience as a Jr. network analyst. My focus is a type of job where I can administer networking/storage hardware and possibly managing servers/workstations too. I am new to this job area, specifically new to city like LA. I am currently unemployed and so, my question is: should I continue with my cisco certifications(routing/wireless) or other comptia certs or both to get a reliable job? I am really interested in CCNA wireless but watching craigslist(LA) and other job sites, it seems people need more cisco voice people. While, some others also ask for Net+ certs. I have scarce financial sources so, its better to make some good decisions. I have not been applying yet due to some personal problems but I will soon. Thank you! P.S. I don't know if I can ask questions like this here. Sorry about that.

    Read the article

  • Rebooting access point via SSH with pexpect... hangs. Any ideas?

    - by MiniQuark
    When I want to reboot my D-Link DWL-3200-AP access point from my bash shell, I connect to the AP using ssh and I just type reboot in the CLI interface. After about 30 seconds, the AP is rebooted: # ssh [email protected] [email protected]'s password: ******** Welcome to Wireless SSH Console!! ['help' or '?' to see commands] Wireless Driver Rev 4.0.0.167 D-Link Access Point wlan1 -> reboot Sound's great? Well unfortunately the ssh client process never exits, for some reason (maybe the AP kills the ssh server a bit too fast, I don't know). My ssh client process is completely blocked (even if I wait for several minutes, nothing happens). I always have to wait for the AP to reboot, then open another shell, find the ssh client process ID (using ps aux | grep ssh) then kill the ssh process using kill <pid>. That's quite annoying. So I decided to write a python script to reboot the AP. The script connects to the AP's CLI interface via ssh, using python-pexpect, and it tries to launch the "reboot" command. Here's what the script looks like: #!/usr/bin/python # usage: python reboot_ap.py {host} {user} {password} import pexpect import sys import time command = "ssh %(user)s@%(host)s"%{"user":sys.argv[2], "host":sys.argv[1]} session = pexpect.spawn(command, timeout=30) # start ssh process response = session.expect(r"password:") # wait for password prompt session.sendline(sys.argv[3]) # send password session.expect(" -> ") # wait for D-Link CLI prompt session.sendline("reboot") # send the reboot command time.sleep(60) # make sure the reboot has time to actually take place session.close(force=True) # kill the ssh process The script connects properly to the AP (I tried running some other commands than reboot, they work fine), it sends the reboot command, waits for one minute, then kills the ssh process. The problem is: this time, the AP never reboots! I have no idea why. Any solution, anyone?

    Read the article

  • Convert a Linksys WAG54GP2 ADSL router into Access point only to extend my Wifi range

    - by Preet Sangha
    I have a wireless lan running on my ASDL2 connection. The router (Seimens Gigaset sx763) is provided by the ISP and is generally good. However I have couple of dead spots at the far end of the house and since I have my old router sitting in the drawer I thought that I'd try to convert it into simple WAP. However downloading the manual from linksys it seems to be that the manual is from an earlier firmware, but the very first option on the very first page seems promising: Wan Mode: Router or ADSL However after this I'm a bit lost. I know that the wireless card on this box will need a mac address and it must get its address from the master router (I thought static might be best). However the again the manual is out of date I have the option of DHCP: ON or OFF or RELAY I've not even got to the more complex options yet. Question is can this device even work this way (seems like it but I cannot find any docs on it), and if so how? Edit: Having now fiddled around I'm of the opinion that this cannot be done.

    Read the article

  • Acer Aspire one is falling apart on Ubuntu

    - by Narcolapser
    Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

    Read the article

  • Can't connect to samba

    - by Rick
    Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

    Read the article

  • How to use Python to read the physical address(MAC ID) [closed]

    - by getjoefree
    I want to read the physical address of the NIC model, i can get the results that i want to with SED.EXE before, but SED.EXE does not support my environment but Python ok, who have the means to do it. The general situation (not plug the network cable, it is impossible to obtain IP address): Ethernet adapter: Connection-specific DNS Suffix.: Chianet Description ...........: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller Physical Address .........: A4-BA-DB-9D-1E-8E Dhcp Enabled ...........: Yes Autoconfiguration Enabled ....: Yes Ethernet adapter 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card Physical Address. . . . . . . . . : 00-23-4D-D9-C0-28 The description of the NIC different, we can use this to fetch the corresponding physical address, base on Physical Address does not work, because the computer with the WLAN Card, I want to use Python to read my computer the card information and after Python handles an output file, output file format: SET MAC = A4BADB9D1E8E and sed format: ipconfig -all|sed -nrf getmac.sed | sed -e "s/-//g" > WINMAC.BAT getmac.sed: /Marvell Yukon 88E8040/ { n; s/.*: ([-0-9A-F]+)/set winmac=\1/p; }

    Read the article

  • DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

    - by FeRtoll
    Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

    Read the article

  • Typical outbound port list for guest access?

    - by Steve
    I manage a weekly rental house that includes wireless Internet access. I've allowed all outbound ports on my router but my ISP has disabled my Internet access twice now because guests have downloaded (or served up) copyrighted content. So I'd like to institute some port filtering to discourage p2p sharing (see disclaimer below). But I don't want to inconvenience the 99.9% of folks who keep things above-board. My question is, what outbound ports are typically open for rental/hotel wireless Internet access, or where can I find such a list? TCP 80,443,25,110 at a minimum. Though my own email service uses 995 and 465 for SSL, some may use IMAP, I personally use SSH and FTP, so I'll open those. Roughly I figure I need to open access to privileged ports, and close 1024 & above. Is there a whitelist I should institute for commonly used high ports? And does it make sense to block UDP 1024 ? Disclaimer: I realize anyone replying to this message could circumvent the port filtering and share content to their heart's content. I do not need comprehensive p2p blocking, which requires more than a port whitelist. Anyone staying at the house shoulders the responsibility for their Internet use, per the rental contract. Also anyone savvy enough to circumvent the port filters would hopefully be savvy enough to use some sort of peer blocking, thereby preventing the ISP from taking down the service.

    Read the article

  • Is Gmail Being Blocked by my ISP (wait till you read this)?

    - by James
    This is the strangest thing I have ever encountered. I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). So okay, maybe my ISP is blocking these for some reason or maybe my firewall is, or maybe there is something wrong with my connectivity, right? NO. On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail ages starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping a complete reinstall would solve the issue, but no luck. So can anyone for the life of them figure out why this could be? And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cabel from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before gmail was perfectly accessible in this computer. I can't remember anything special that happened on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter

    Read the article

  • Why do messenger keeps coming up when I adjust screen brightness?

    - by Asaf R
    My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

    Read the article

  • How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

    - by joechip
    I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

    Read the article

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >