Search Results

Search found 1113 results on 45 pages for 'ati'.

Page 37/45 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• High-End Gaming Desktop PC in France [closed]

  - by Lerikunus

  Hello, I was looking to buy an ALIENWARE AREA 51, as my Desktop crashed some days ago. But the Preliminary Ship date is 03.01.11 and I need the new PC until Friday next week =( Does someone know a(n) (online)-store where Build&Shipping time is quite low so I can get it until next Friday? I am living in France (Nice). Or any place I can ask fot his kind of advice? This is my desired configuration: Overclocked Intel® Core™ i7 980x Extreme Six Core Processor (4.0GHz, 12MB Cache) 12GB Triple Channel 1600MHz DDR3 Dual 2GB ATI Radeon™ HD 6950 2TB RAID 1+0 (4x 1TB SATA-II, 7,200 RPM, 32MB Cache HDDs) 2TB RAID 1 (2x2TB SATA-II, 7,200 RPM, 32MB Cache HDDs) Thank you very much!

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• HDMI resolution limited to 1920 x 1080?

  - by Jay Bazuzi

  Monitor is a Dell 3008wfp. Very nice. Max resolution 2560 x 1600. Video card is an ATI Radeon HD 4350. I like it because it was cheap and is fanless. (Noise bugs me.) I would like to switch from DVI to HDMI, but when I use HDMI, the resolution drops to 1920 x 1080. Do I need to change out my video card to get the full resolution? How can I pick one that will do the max resolution?

  Read the article

• What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

  - by Ogapo

  I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

  Read the article

• How to make my display Grayscale?

  - by Oldarney

  I want to reduce the saturation of my laptop monitor to the point that it is almost grayscale. That's the goal. Intel and Asus don't have an answer. Asus Splendid and the intel graphics control panel can increase the saturation, but not lower it. I would prefer a software solution, although I DIY'ed a vga grayscale adapter for my desktop. I have an Asus UL30A with an Intel GMA 4500MHD. I know that the latest ATI cards, windotosh's and high end nvidia cards all support control panel desaturation. Why? black and white makes me 3 times more productive.

  Read the article

• Very Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I calibrated display color. I uninstalled and reinstalled the adapter. I tried to update the driver but the driver is up to-date. Any help would be appreciated.

  Read the article

• Monitor does not turn on until reset

  - by eggonlegs

  I have a system with an ATI 4870 hooked up to a Samsung P2350 using DVI. My motherboard is a GA-EP45 DS4P with the latest BIOS. The situation is: I turn on my PC (with the power switch) I get a blank screen I hit reset and the PC boots up normally, i.e. the monitor turns on and This has been the case for a couple of months (Was away for a while, came back and it was the same case). I was hoping the situation would somehow fix itself but alas, nothing. I have tried numerous settings in the BIOS (Combinations of different settings of the ACPI and power saving options) and have tried different cables. Has anyone experienced this before? I don't know where to go from here. It is pretty infuriating because it means I can't put my computer to sleep, as the monitor won't come on. Any help is appreciated. Thanks

  Read the article

• Windows 7 hangs after longer inactivity of user

  - by scooby37

  I have serveral PCs running Windows 7 in different falvors (32- / 64-bit / Professional / Ultimate / ATI / Nvidia) - they all have one problem in common... ...if I don't work on any of them for a longer time and the screen goes off as it should be (all default settings!) they sometimes go into some kind of sleep mode where I get to see the desktop or whatever I did before leaving after moving the mouse or pressing a key - but nothing reacts for a different amount of time from serveral seconds to serveral minutes! Any hint that helps solving this anoying problem would be very welcome ;-)

  Read the article

• Low end dedicated GPU vs. integrated Intel graphics (for light CAD work)

  - by PaulJ

  I have been asked to spec a PC for an interior design business. They are going to do some AutoCAD work (but they won't be using massive datasets or anything), and also use Kitchen Draw, a program that has 3D visualization features and says, in its requirements, that "a recent NVidia or ATI card might be enough". Since they are very limited budget-wise, I had originally picked a GeForce GT 610 card, but this card is so low end that I'm left wondering whether it will be an improvement at all over the dedicated Intel HD2500 graphics chip that comes with the CPU (I will be using an Ivy-Bridge Intel i5). Most of the information I see around is for gaming, which isn't really relevant in my case. Basically, for the use case I've described (light 3D work), can one get away with a current Intel HD graphics chipset? And will a low end GPU like the GT 610 provide a noticeable improvement?

  Read the article

• What components should I upgrade to squeeze more life of my pc? [on hold]

  - by Jared

  Hi my current specs are CPU: Intel Core i5 750 2.66 GHz, Socket 1156 Motherboard: Asus P7P55 LX Motherboard, Socket 1156, 4xDIMM DDR3, 2xPCIe-16, 3xPCI, 2xPCIe-1, 14xUSB2, Audio, 1xATA, 6xSATA, RAID, ATX HDD: Seagate Barracuda 7200.11 ST31500341AS Hard Disk Drive, 1500GB, 7200rpm, 32MB Cache, SATA-2 RAM: G.Skill Ripjaw F3-12800CL8D-4GBRM, 2x2GB, DDR3-1600, PC3-12800, CL8, DIMM Video: MSI Radeon 5850 R5850-PM2D1G Video Card, 1024MB, DDR5, PCIe-16, DVI, CrossFire, HDMI PSU: Vantec ION2, 620W ATX PSU, SLI Ready, Black Firstly I know it badly needs an SSD, for which I'm thinking of the Samsung 250gb 840 EVO series. The ram could do with another 4GB, for which I am thinking of replacing the 2x2GB for 2x4GB of the same type. My video card is struggling with the latest releases, so vitally should I ditch the video card and go for something newer (ATI 7850, GTX 660?) or try and get another 5850 for crossfire support? Bearing in mind 5850's are sort of hard to come buy now as they are not stocked in shops usually, which means they have to be bought second hand.

  Read the article

• Python: how do I install SciPy on 64 bit Windows?

  - by Peter Mortensen

  How do I install SciPy on my system? Update 1: for the NumPy part (that SciPy depends on) there is actually an installer for 64 bit Windows: numpy-1.3.0.win-amd64-py2.6.msi (is direct download URL, 2310144 bytes). Running the SciPy superpack installer results in this message in a dialog box: "Cannot install. Python version 2.6 required, which was not found in the registry." I already have Python 2.6.2 installed (and a working Django installation in it), but I don't know about any Registry story. The registry entries seems to already exist: REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Python] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\Help] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\Help\Main Python Documentation] @="D:\\Python262\\Doc\\python262.chm" [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\InstallPath] @="D:\\Python262\\" [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\InstallPath\InstallGroup] @="Python 2.6" [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\Modules] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\PythonPath] @="D:\\Python262\\Lib;D:\\Python262\\DLLs;D:\\Python262\\Lib\\lib-tk" What I have done so far: Step 1 Downloaded the NumPy superpack installer numpy-1.3.0rc2-win32-superpack-python2.6.exe (direct download URL, 4782592 bytes). Running this installer resulted in the same message, "Cannot install. Python version 2.6 required, which was not found in the registry.". Update: there is actually an installer for NumPy that works - see beginning of the question. Step 2 Tried to install NumPy in another way. Downloaded the zip package numpy-1.3.0rc2.zip (direct download URL, 2404011 bytes), extracted the zip file in a normal way to a temporary directory, D:\temp7\numpy-1.3.0rc2 (where setup.py and README.txt is). I then opened a command line window and: d: cd D:\temp7\numpy-1.3.0rc2 setup.py install This ran for a long time and also included use of cl.exe (part of Visual Studio). Here is a nearly 5000 lines long transcript (230 KB). This seemed to work. I can now do this in Python: import numpy as np np.random.random(10) with this result: array([ 0.35667511, 0.56099423, 0.38423629, 0.09733172, 0.81560421, 0.18813222, 0.10566666, 0.84968066, 0.79472597, 0.30997724]) Step 3 Downloaded the SciPy superpack installer, scipy-0.7.1rc3- win32-superpack-python2.6.exe (direct download URL, 45597175 bytes). Running this installer resulted in the message listed in the beginning Step 4 Tried to install SciPy in another way. Downloaded the zip package scipy-0.7.1rc3.zip (direct download URL, 5506562 bytes), extracted the zip file in a normal way to a temporary directory, D:\temp7\scipy-0.7.1 (where setup.py and README.txt is). I then opened a command line window and: d: cd D:\temp7\scipy-0.7.1 setup.py install This did not achieve much - here is a transcript (about 95 lines). And it fails: >>> import scipy as sp2 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named scipy Platform: Python 2.6.2 installed in directory D:\Python262, Windows XP 64 bit SP2, 8 GB RAM, Visual Studio 2008 Professional Edition installed. The startup screen of the installed Python is: Python 2.6.2 (r262:71605, Apr 14 2009, 22:46:50) [MSC v.1500 64 bit (AMD64)] on win32 Type "help", "copyright", "credits" or "license" for more information. >>> Value of PATH, result from SET in a command line window: Path=D:\Perl64\site\bin;D:\Perl64\bin;C:\Program Files (x86)\PC Connectivity Solution\;D:\Perl\site\bin;D:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;d:\Program Files (x86)\WinSCP\;D:\MassLynx\;D:\Program Files (x86)\Analyst\bin;d:\Python262;d:\Python262\Scripts;D:\Program Files (x86)\TortoiseSVN\bin;D:\Program Files\TortoiseSVN\bin;C:\WINDOWS\system32\WindowsPowerShell\v1.0;D:\Program Files (x86)\IDM Computer Solutions\UltraEdit\

  Read the article

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• Ubuntu 12.04.1 Radeon 9550 stuck with 640x480, works in Geexbox

  - by Betty

  I am a complete new user trying to set up Ubuntu on an old desktop. It has an AGP Radeon 9550 graphics card. I am running Ubuntu from a USB drive with persistence as the PC currently has no hard drive I seem to be stuck in 640*480 mode. The desktop itself is larger, but the monitor display is stuck on 640*480. In SettingsDisplays, only the 640*480 option is available. What I have found out so far: The proprietary ati drivers no longer support my card. If 3D isn't an issue (it's not) the open source driver should be fine. This should be installed by default so in theory I am using it already xserver-xconf/pci/*.ids doesn't show any entries for the card's PCI id. hardware additional drivers show no proprietary drivers I tried the booting into the current version of Geexbox from a USB stick and this set the resolution correctly by default so I know it can be done, but I know no idea how. How can I tell what driver the card is using, and how can I get the higher resolutions back?

  Read the article

• How can I fix apt-get autoremove wanting to uninstall most of my packages?

  - by Stefano

  I did change my packages in synaptic from manually installed to Automatically (they were not manually installed but automatically). Now they are marked for Autoremove. I tested it with sudo apt-get autoremove and the result is shown below (a reduced version because its almost all packages). I remember last year I had same issue and solved it via Ubuntu forums but the forum is down and I cannot reach the post! Anyone has any idea how to fix this? sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: unity-asset-pool unity-greeter unity-lens-applications unity-lens-files unity-lens-music unity-lens-photos unity-lens-video unity-scope-gdrive unity-scope-musicstores unity-scope-video-remote unity-services unity-tweak-tool unity-webapps-amazoncloudreader unity-webapps-common unity-webapps-facebookmessenger unity-webapps-gmail unity-webapps-googledocs unity-webapps-googleplus unity-webapps-launchpad unity-webapps-linkedi xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga xserver-xorg-video-modesetting xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-r128 xserver-xorg-video-radeon xserver-xorg-video-s3 xserver-xorg-video-savage xserver-xorg-video-siliconmotion xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident xserver-xorg-video-vesa xserver-xorg-video-vmware xul-ext-unity xul-ext-webaccounts xul-ext-websites-integration y-ppa-manager yad zenity zenity-common zip 0 upgraded, 0 newly installed, 1440 to remove and 0 not upgraded. After this operation, 3,853 MB disk space will be freed. Do you want to continue [Y/n]?

  Read the article

• Help find correct alsa model for onboard sound (alc887?) that will work with jack and have correct mixer setup

  - by Jazz

  I have a Gigabyte GA-MA74GMT-S2 motherboard. I am using Jack for sound - connected to ALSA. I am running Ubuntu 12.04. aplay -l reports card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog] The problem is that the default setup, that alsa decides to use, causes stuttering and xruns no matter how generous I set the frames/period or periods/buffer etc. Also, Jack works fine if I plug in an external USB sound system and use that. My processor is an AMD phenom x4 945, and I have 8GB ram, and Video card is Geforce GTX550 Ti, all of which should be quite capable enough. I also tried Pulseaudio and that works fine, but I need to use Jack At first I thought it might be an interrupt conflict, but I have found that adding "options snd-hda-intel model=generic" to /etc/modprobe.d/alsa-base.conf causes it to play correctly, but the limited mixer setup lacks controls I need - so this setup isn't good enough. Still, it seems to prove it isn't a hardware conflict. I have tried many other models, such as 3stack, 6stack, auto and even basic, and they all suffer from the stuttering. I eventually found "options snd-hda-intel model=3stack-6ch-intel" works without stuttering, and mixer is much closer to what it needs to be. Can anyone help on how to get a correct and accurate model for ALSA to use? More info on the hardware that might help... *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff

  Read the article

• How to switch sound-drivers, and to which? [AMD] Hudson Azalia Controller

  - by Anders Martini

  System settings/sound does not open, freezes and I have to force close. Speaker symbol with volume control does not open scroll-down menu, and there is no sounds. Many people have problems with Hudson Azalia in Ubuntu, but I found no working solution. I don't really understand much of this, but here are some more details: aplay -l : **** List of PLAYBACK Hardware Devices **** (after running this one, it starts some kind of process that doesn't get any results, and doesn't stop, terminal has to be shut down) lspci -vnn | grep -iA5 audio: 00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Device [1002:9902] Subsystem: Hewlett-Packard Company Device [103c:184c] Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f0444000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel -- 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:184c] Flags: bus master, slow devsel, latency 32, IRQ 54 Memory at f0440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel It seems to me that I'm currently running hda Intel drivers on my AMD Hudson Azalia soundcard. I can't see what drivers this soundcard uses. Do I need any additional drivers for my soundcard, and where would I find them?

  Read the article

• Windows being placed on wrong monitor

  - by osarusan

  I'm running a fresh install of Ubuntu 12.04x64 (ATI Radeon HD4770 with open source drivers) and I am having trouble getting windows to appear on the right screen. Yesterday I plugged in my secondary monitor and it worked perfectly out of the box, except that for some reason, compiz wants to place windows on the secondary monitor rather than the first. This is a problem because I don't use the secondary monitor 100% of the time, and I don't want windows being placed on it when it is off. Also, it's only some windows that are getting placed there. For example, the "Edit Connections" window from the networking menu is always placed off my primary screen. There are a number of other windows that do the same. While some, like nautilus, always appear on the proper monitor. I played around with Compiz Config Settings Manager and found that if I disable the "Place Windows" plugin, all of the windows appear on the proper monitor -- except that they are placed underneath the Unity Panel, so I have to alt-drag them out each time in order to use them. With out without that plugin, I can't seem to get a sensible setup. The windows are supposed to appear only on the active display, but for some reason Compiz doesn't want to do that with some windows. Does anyone know a fix for this? I'd rather not have to disable and re-enable my monitor every single time I use it...

  Read the article

• High load (and high temp) with idle processes

  - by Nanne

  I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

  Read the article

• Gateway ZA8 Netbook graphics Issue

  - by Hansel

  The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

  Read the article

• Problems with both LightDM and GDM using DisplayLink USB monitor

  - by Austin

  When I use LightDM, it will auto-login to desktop just fine. The only problem is Compiz doesn't work, and menus don't work. I can't right-click the desktop, and I can't select program menus in the top bar (I.e clicking "File" does nothing). When I use GDM, I only get a blank blue screen and the mouse cursor. I can't Ctrl+Alt+Backspace to restart, but I can Ctrl+Alt+F1 and Ctrl+Alt+F7 to switch modes. I don't think it's auto-logging me in, but I'm not sure. It plays the login screen noise. Will update with more information when I get home! EDIT: Okay, so I did a fresh install, just to ensure I hadn't borked something playing in the console. I reconfigured my setup as I did before, with the same results. Here's what I followed. The only difference is that instead of setting "vga=normal nomodeset" I set "GRUB_GFXPAYLOAD_LINUX = text". Also I only have the DisplayLink monitor configured in my xorg.conf file. At this point I'm using the open radeon driver, although I used the proprietary ati driver before. I'm not sure if I'm having a problem with: - X configuration - Graphics driver - DisplayLink driver - Unity - LightDM - Compiz - Or something else The resolution of the monitor is 800x480, 16bit. I tried setting a larger virtual resolution of 1200x720 (because the real resolution is lower than the recommended resolution), but it causes Ubuntu to boot into low graphics mode. When I get home I'm going to install the fglrx driver and see if it enables virtual resolutions, which may further enable my window manager to function properly.

  Read the article

• How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

  - by martin

  As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

  Read the article

• Compiz not drawing window controls in ubuntu 11.10

  - by Siva Prasad Varma

  I have recently installed driver for my ATI graphic card in my Dell Studio laptop. I have also read this somewhere on the web that Ubuntu enables compiz window manager by default if your hardware can run it. Is it true ? In my case before Installing graphic card driver the window manager was Metacity, but now I have compiz as my Window manager. I found this out uisng Displex Indicator applet also confirmed by wmctrl -m. From the time I have installed graphic card drivers, the window manager(Compiz) is not drawing window control buttons for some of the windows. For example if I open a terminal I have to close it using key board shortcuts or use the File - Quit option in app-menu. Also I am not able to move the window because of this. From then when-ever I find a window without window control buttons I am restarting the window manager using Displex Indicator applet. But this is very annoying and also consumes a lot of time(when I am doing my work). Can any one suggest any solution for this. What are up's and down's of using Compiz Vs Metacity.

  Read the article

• Acer Aspire One 725 - missing graphic card driver?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >