Search Results

Search found 1113 results on 45 pages for 'ati'.

Page 43/45 | < Previous Page | 39 40 41 42 43 44 45  | Next Page >

• My new SSD is causing issues. How can I solve them?

  - by Allan

  Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

  Read the article

• Computer slow after installing 32GB RAM

  - by John Gilmore

  I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

  Read the article

• Out of memory errors but not actually out of memory...

  - by commradepolski

  So, myself and my fellow support techs have been fighting with this issue and we still dont know what the problem is. Lets start off with the system specs: Windows XP 32 bit Corporate (SP2 and SP3) Intel D975XBX2 Mobo 4gb of ram Intel Core 2 Quad Q6600 ATI Radeon HD 3600 - 512mb After a few hours of working on the machine, the end user will begin to see the following symptoms: Out of memory messages Title bars and menus dont draw in properly Problems accessing network resources Problems opening up documents such as MSWord and MSPowerpoint and text files Problems opening up explorer windows General instability We have looked at task manager while this issue was occurring, and all indicators, like PF usage, threads, handles, etc. are normal. We have been having trouble pinpointing the root cause of this issue. It is also not situated with one user, it affects 8-10. So far we have tried: Resetting CMOS (Waiting to see results) Replacing video card (didnt help) Windows updates (didnt help) Updating network drivers (didnt help) Switching user from 1gbps to 100mbps network connection (awaiting results) Swapping the affected user's hardware (waiting for results) Increasing desktop heap size (helped for a bit but then the issue became more frequent) Applying the /3 switch to XP (didnt help) Increasing and decreasing and setting PF to system managed state (didnt help) We did have a power outage at the office a couple weeks ago, and all these issues became more frequent. Prior to the power outage it may take a week or so for the users to experience the issues but since the power outage it takes 3-4 hours or less. We havent had reports of the above issues causing BSODs, although that would be easier to diagnose :). Any help is greatly appreciated.

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Computer freezes after watching Youtube videos

  - by Roberts

  I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

  Read the article

• Ubuntu loading stops ?

  - by joxnas

  I don't know why, or how... but my ubuntu's loading / booting stops right after the ubuntu logo appearing.. An underscore appears in the right top of the screen: _ then, it disappears leaving the whole screen black Version is 9.10 ,Kernel is .20 I have tryed recovering mode and selected recover damaged packages option, but it didn't do any good.. I have very important files in Ubuntu that I need to copy to a pen drive or something, today.. The terminal mode is working, so i think i can do this there.. My questions: How can I get my Ubuntu to load? Is it possible to copy the files i need via terminal mode? I dont know if with other of the previous kernels it would work... but I had configured my grub (inside Ubuntu's gui) to show only the last kernel... and now i can't select any other kernel then .20 because I don't know a way to configure Grub unless via Ubuntu's gui... My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core duo 4Gb DDR2

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• How to set up multiple video cards in Windows XP

  - by Swish

  All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

  Read the article

• Some Portions of Computer Running Slow (Specifically Graphics)

  - by Mike Gates

  I noticed that a few things are running slow today on my Windows 7 laptop. Specifically, they are: Opening and closing windows takes several seconds for the animation to complete. Windows media player opens fine, but the movies are very laggy MMORPG's, such as RuneScape, are extremely laggy When waking my computer from sleep mode, after entering my password, my desktop takes about 3 seconds to fade in Other than those, everything runs at a normal speed. Things I've done that maybe contributed to this problem: Changed the graphics processor (by plugging in/unplugging the charger) [however, no matter how I change the graphics, I'm still getting this lagginess] Installed AdBlock, a Firefox addon [I recently removed it, and I'm still experiencing this problem] Went into Advanced System Settings, Clicked Settings, and unchecked a few visual things (such as the animation for opening and closing windows) [sure, this got rid of the opening/closing windows lag, but I like that little animation - plus that leaves all the other lag problems I'm experiencing] So, does anyone have any ideas/fixes? If so, please respond. Thank you. Some Other Information: I'm on a HP Pavillion dv7 laptop, 4285 Entertainment PC, with: intel CORE i5 inside, ATI Mobility Radeon Premium Graphics, Microsoft DirectX11 Opening and closing of windows: Defined as opening a program (i.e. Firefox) or closing it by hitting the X in the upper-right hand corner. Lately, the animation for opening and closing windows (which is simply either growing from the icon from the taskbar to fill the screen, or shrinking from the screen down towards the icon on the toolbar.) This problem also occurs for minimizing/maximizing windows. Very laggy movies: defined as .avi movie files saved to My Documents which skips several frames per second and seemingly slows down the movie as a whole Extremely laggy games: I tried RuneScape today, and movement in the game was at least 10x slower than it ever has been, even when playing on the lowest detail/graphics Desktop taking 3 seconds to fade in after sleep: in this scenario, I had no other programs running visibly. The computer generally fades to black from the password screen to the desktop in about 1 second, normally. However, it is now taking 3 or more seconds.

  Read the article

• default xna 4.0 gametime don´t works well for 2D physics

  - by EusKoder

  I am developing a game using Visual Studio 2010 and XNA 4.0, after advancing to some extent with the project (a platform based 2d platformer msdn starter kit) I got to test it on different computers with different hardware (CPU, graphics, etc.) and I found that the speed of movement object of the game is quite different, I implemented the PSK physics msdn that are based on time, /// <summary> /// Updates the player's velocity and position based on input, gravity, etc. /// </summary> public void ApplyPhysics(GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; Vector2 previousPosition = Position; // Base velocity is a combination of horizontal movement control and // acceleration downward due to gravity. velocity.X += movement * MoveAcceleration * elapsed; velocity.Y = MathHelper.Clamp(velocity.Y + GravityAcceleration * elapsed, -MaxFallSpeed, MaxFallSpeed); velocity.Y = DoJump(velocity.Y, gameTime); // Apply pseudo-drag horizontally. if (IsOnGround) velocity.X *= GroundDragFactor; else velocity.X *= GroundDragFactor; //velocity.X *= AirDragFactor; // Prevent the player from running faster than his top speed. velocity.X = MathHelper.Clamp(velocity.X, -MaxMoveSpeed, MaxMoveSpeed); // Apply velocity. Position += velocity *elapsed; Position = new Vector2((float)Math.Round(Position.X), (float)Math.Round(Position.Y)); // If the player is now colliding with the level, separate them. HandleCollisions(gameTime); // If the collision stopped us from moving, reset the velocity to zero. if (Position.X == previousPosition.X) velocity.X = 0; if (Position.Y == previousPosition.Y) { velocity.Y = 0; jumpTime = 0.0f; } } tested eg with a PC (PC1) 2.13GHz Intel Core 2 6400 / ATI Radeon HD 4670 and another one: (pc2) 3.00GHz Intel Pentium D / Intel 82945G Express Chipset Family by displacement difference (moving x axis at supossed (position = velocity * gametime.ElapsedGameTime.TotalSeconds) constant velocity, for example) is 3 seconds in a total of 20 (example: moving pc1 player sprite 6000 pixels in the x-axis at 20 seconds and pc 2 runs the same distance in 17 ). Tested on a 3rd PC: i72700k / Gigabyte GTX 560 TI the results are even worse, after some time after starting the game gets like 3 times slower and showing the number of pixels in each frame moved in a debug window in the game (counting updatespersecond with counter variable for updates cuantity and gametime for counting a second show 63fps), it appears as if the number is always constant ( refreshments lose the Update method?). In this pc if I put the game in fullscreen during the course of the game, the effect of "go slow" is immediate and restore window mode sometimes yield returns to "normal" and sometimes not. Eventually I began to try a new project to test whether the movement is constant in different pc loading only one sprite and its position value in screen printing. Occur The same. I even tried moving a constant amount of pixels explicitly (position + = 5) and different speeds in different pc quantities of pixels moved in x time. I have the game loop as the default (fixedTimeStep=true;SynchronizeWithVerticalRetrace=true;). I've also tried turning off and creating another timestep as discussed in different post (eg http://gafferongames.com/game-physics/fix-your-timestep/ but i can´t achieve the desired result, move the same number of pixels in X seconds on different computers with windows. All pc used for tests use windows 7 enterprise pc1 == x86 the others are x64. The weirdest thing is that I find information about people describing the same problem and that I wear long nights of searches. Thanks for your help.

  Read the article

• 12.04 installation started to black screen during boot today

  - by Cedric

  NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

  Read the article

• Microsoft Ergonomic 7000 keyboard + mouse lag

  - by user115210

  I recently bought a new Microsoft Ergonomic 7000 keyboard. I started to use it with my Ubuntu 12.04 and it lags all the time. I try to be more specific: Even on a minor CPU usage the mouse lags. By minor I mean firefox loading a webpage, or opening an application like conky, gnome-terminal etc. When higher CPU usage occurs the keyboard is lagging too, but by this I mean it misses my hits, so what I type won't appear later. What I tried so far (and did not work)? Disable autosuspend (echo -1 to sys/bus/usb.../autosuspend) and at the same place set level to "on". I have tried several video drivers: Vesa, radeon, newest catalyst (and catalyst beta too) When my keyboard and/or mouse lags I tried an other USB keyboard which works perfectly and the same for the mouse. I tried the keyboard and mouse on a different computer with Linux (Ubuntu, Arch, OpenSuse) too, the same problem appears but not on Windows. I tried to replace the battery sets, and to change channel on the dongle. And also tried to use the dongle from other USB ports. On the same time I am able to use any other wireless mouse. I changed the XkbModel to "microsoft7000" but it did not solve anything. About the hardware: AMD A8 3870K - Radeon HD6550D 8 GB of memory 4 GB of swap (which is almost never used) Here are my PC's details: lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 045e:071d Microsoft Corp. Bus 005 Device 002: ID 0461:4ea7 Primax Electronics, Ltd lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6550D] 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -n 150: http://pastebin.com/sGUAAiUe cat /var/log/Xorg.0.log: http://pastebin.com/fny7ZkN4 Note: The Icon7 Twister Evolution is the replacement mouse to use.

  Read the article

• Updating FGLRX driver fails & deactivates FGLRX driver

  - by Edwin

  I have an ATI/AMD graphics card in my computer. However, every time I try to install the post-release updates, it always fails and deactivates the graphics driver. I've pasted the last few messages following the ldconfig deferred processing now taking place message from the installation log from /var/log/jockey.log below; if you're interested, I have pasted the full output here. WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking What's going on? Is ldconfig corrupted, or has the driver package just not been properly installed, despite reporting to the "Additional Drivers" panel that it is?

  Read the article

• Free RAM disappears - Memory leak?

  - by Izzy

  On a fresh started system, free reports about 1.5G used RAM (8G RAM alltogether, Ubuntu 12.04 with lightdm and plasma desktop, one konsole window started). Having the apps running I use, it still consumes not more than 2G. However, having the system running for a couple of days, more and more of my free RAM disappears -- without showing up in the list of used apps: while smem --pie=name reports less than 20% used (and 80% being available), everything else says differently. free -m for example reports on about day 7: total used free shared buffers cached Mem: 7459 7013 446 0 178 997 -/+ buffers/cache: 5836 1623 Swap: 9536 296 9240 (so you can see, it's not the buffers or the cache). Today this finally ended with the system crashing completely: the windows manager being gone, apps "hanging in the air" (frameless) -- and a popup notifying me about "too many open files". Syslog reports: kernel: [856738.020829] VFS: file-max limit 752838 reached So I closed those applications I was able to close, and killed X using Ctrl-Alt-backspace. X tried to come up again after that with failsafeX, but was unable to do so as it could no longer detect its configuration. So I switched to a console using Ctrl-Alt-F2, captured all information I could think of (vmstat, free, smem, proc/meminfo, lsof, ps aux), and finally rebooted. X again came up with failsafeX; this time I told it to "recover from my backed-up configuration", then switched to a console and successfully used startx to bring up the graphical environment. I have no real clue to what is causing this issue -- though it must have to do either with X itself, or with some user processes running on X -- as after killing X, free -m output looked like this: total used free shared buffers cached Mem: 7459 2677 4781 0 62 419 -/+ buffers/cache: 2195 5263 Swap: 9536 59 9477 (~3.5GB being freed) -- to compare with the output after a fresh start: total used free shared buffers cached Mem: 7459 1483 5975 0 63 730 -/+ buffers/cache: 689 6769 Swap: 9536 0 9536 Two more helpful outputs are provided by memstat -u. Shortly before the crash: User Count Swap USS PSS RSS mail 1 0 200 207 616 whoopsie 1 764 740 817 2300 colord 1 3200 836 894 2156 root 62 70404 352996 382260 569920 izzy 80 177508 1465416 1519266 1851840 After having X killed: User Count Swap USS PSS RSS mail 1 0 184 188 356 izzy 1 1400 708 739 1080 whoopsie 1 848 668 826 1772 colord 1 3204 804 888 1728 root 62 54876 131708 149950 267860 And after a restart, back in X: User Count Swap USS PSS RSS mail 1 0 212 217 628 whoopsie 1 0 1536 1880 5096 colord 1 0 3740 4217 7936 root 54 0 148668 180911 345132 izzy 47 0 370928 437562 915056 Edit: Just added two graphs from my monitoring system. Interesting to see: everytime when there's a "jump" in memory consumption, CPU peaks as well. Just found this right now -- and it reminds me of another indicator pointing to X itself: Often when returning to my machine and unlocking the screen, I found something doing heavvy work on my CPU. Checking with top, it always turned out to be /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none. So after this long explanation, finally my questions: What could be the possible causes? How can I better identify involved processes/applications? What steps could be taken to avoid this behaviour -- short from rebooting the machine all X days? I was running 8.04 (Hardy) for about 5 years on my old machine, never having experienced the like (always more than 100 days uptime, before rebooting for e.g. kernel updates). This now is a complete new machine with a fresh install of 8.04. In case it matters, some specs: AMD A4-3400 APU with Radeon(tm) HD Graphics, using the open-source ati/radeon driver (so no fglrx installed), 8GB RAM, WDC WD1002FAEX-0 hdd (1TB), Asus F1A75-V Evo mainboard. Ubuntu 12.04 64-bit with KDE4/Plasma. Apps usually open more or less permanently include Evolution, Firefox, konsole (with Midnight Commander running inside, about 4 tabs), and LibreOffice -- plus occasionally Calibre, Gimp and Moneyplex (banking software I'm already using for almost 20 years now, in a version which did fine on Hardy).

  Read the article

• Ubuntu 13.04 installation issues: unable to handle kernel paging request error

  - by user173944

  I wish I could say that I’ve done more for the Linux community as of recent but I am very VERY new to all of this and I feel very much in over my head. I figured I would install Ubuntu. on my computer and then I would learn and contribute to the community simultaneously. I will try to be as detailed as I can, please ask questions if you need clarification. I installed Ubuntu. 13.04 (64-bit) on my dell Inspiron 1501. This has an AMD Turion 64-bit TL-56 1.8 Ghz mobile processor. It is a dual core. It has an ATI Radeon Xpress 1150 chipset in it as well. As of right now I only have a total of 2Ghz ram, however I was planning on upgrading that in the near future so I opted for the 64-bit Ubuntu. 13.04. I first tried the live CD and everything seemed to be functioning correctly other than the wireless (but that's not the issue at hand, there are plenty of guides on the internet on how to get that functioning). The internet worked just fine when it was plugged in so no issues there. However, once I went from that to installing 13.04 (just 13.04, no dual partitioning... I want this computer to run strictly Ubuntu.) it did not work. It took me into a shell that I could not type anything into. In this shell it said Bug: unable to handle kernel paging and then it called a bunch of traces and froze up. I had to hard reset the laptop. I tried the boot-repair program multiple times with many different settings and typically after starting up the laptop would say something along the lines of recursive errors. will attempt to fix and then it would attempt to fix a couple of things, and then the computer would freeze up after the text said end trace... so I had to hard reset it again. I'm not an impatient person either, when I say it would freeze up it would be for a period of at least 15 minutes each time before I decided to hard reset. I attempted to install 12.10 on it instead and I got the same exact message, and when I ran boot-repair it did the same exact thing as before. I am currently in the process of running memtest64+ on the computer's memory, though I really don't believe that, nor any of the hardware is at fault due to the fact that it was still running windows vista perfectly when I had decided to switch over to Ubuntu. so far the memtest has came back just fine without any errors, but I’ve only been running it for approximately an hour. So this is the situation I’m in. I did notice when I was using the live disk that the video driver needed updated so I performed that, though I’m fairly certain that has nothing to do with this. I have also attempted (though I’m not certain that my attempt was successful in accomplishing what I had planned) to manually edit the grub settings by making acpi=0 along top of adding nomodeset to the boot commands. Like I said, I’m not sure I did that correctly though, but I’m fairly certain I did. If anyone needs any more information I will be more than happy to provide it, I will post back once I get the full results of the memtest. I very much appreciate any ideas anyone else has, I’ve been at this for a few days to no avail... thank you

  Read the article

• It's like I'm in recovery mode after update, but I'm not

  - by mawburn

  I used the Ubuntu software updater and updated to the most recent packages. After the last update today, it's like I have gone into recovery mode, but I haven't. I am running UbuntuGNOME First, everything looks like this: Switching to dark mode does nothing. Also, default applications do not work. Such as Startup and the default screenshot application. Everything was working fine before the latest software update. System Info Ubuntu 14.04 LTS Gnome-Shell 3.10.4 Kernel 3.13.0-29 I can't figure out how to get an update history, but this is almost a fresh install. It's about a week old install and this is the 3rd time I've used the Ubuntu Software Update. I am running AMD ATI HD6700 with the proprietary Catalyst drivers. I tried to provide all information that I thought would be useful, if you need any more please let me know. Edit - I believe something went wrong within these updates: Update Log: Start-Date: 2014-06-09 19:07:07 Commandline: aptdaemon role='role-commit-packages' sender=':1.68' Install: libgnome-desktop-3-10:amd64 (3.12.0-0~eugenesan~trusty2) Upgrade: gnome-session-common:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gnome-session-bin:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gir1.2-gnomedesktop-3.0:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), gnome-session:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), python-libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libspice-server1:amd64 (0.12.4-0nocelt2, 0.12.4-0nocelt2.02~eugenesan~trusty1), gir1.2-mutter-3.0:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), xserver-xorg-video-qxl:amd64 (0.1.1-0ubuntu3, 0.1.1-0ubuntu3.01), libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libxml2:i386 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), gnome-desktop3-data:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), mutter:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), mutter-common:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), libxml2-utils:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libmutter0c:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1) End-Date: 2014-06-09 19:07:12 I also installed Citrix Receiver today, following the tutorial here: Citrix Receiver 12.1 on Ubuntu 14.04 64-bit Log Start-Date: 2014-06-09 18:59:06 Commandline: apt-get install libmotif4:i386 nspluginwrapper lib32z1 libc6-i386 libxp6:i386 libxpm4:i386 libasound2:i386 Install: libmotif-common:amd64 (2.3.4-5, automatic), libatk1.0-0:i386 (2.10.0-2ubuntu2, automatic), libxft2:i386 (2.3.1-2, automatic), libgraphite2-3:i386 (1.2.4-1ubuntu1, automatic), nspluginviewer:i386 (1.4.4-0ubuntu5, automatic), libpango-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcursor1:i386 (1.1.14-1, automatic), libmotif4:i386 (2.3.4-5), libxm4:amd64 (2.3.4-5, automatic), libxm4:i386 (2.3.4-5, automatic), libxp6:i386 (1.0.2-1ubuntu1), libpangocairo-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcb-render0:i386 (1.10-2ubuntu1, automatic), libthai0:i386 (0.1.20-3, automatic), libharfbuzz0b:i386 (0.9.27-1, automatic), libpixman-1-0:i386 (0.30.2-2ubuntu1, automatic), libpangoft2-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libcairo2:i386 (1.13.0~20140204-0ubuntu1, automatic), lib32z1:amd64 (1.2.8.dfsg-1ubuntu1), libjasper1:i386 (1.900.1-14ubuntu3, automatic), libgtk2.0-0:i386 (2.24.23-0ubuntu1.1, automatic), nspluginwrapper:amd64 (1.4.4-0ubuntu5), libuil4:amd64 (2.3.4-5, automatic), libuil4:i386 (2.3.4-5, automatic), libxcb-shm0:i386 (1.10-2ubuntu1, automatic), libxmu6:i386 (1.1.1-1, automatic), libc6-i386:amd64 (2.19-0ubuntu6), libxinerama1:i386 (1.1.3-1, automatic), libgdk-pixbuf2.0-0:i386 (2.30.7-0ubuntu1, automatic), libxcomposite1:i386 (0.4.4-1, automatic), libmrm4:amd64 (2.3.4-5, automatic), libmrm4:i386 (2.3.4-5, automatic), libdatrie1:i386 (0.2.8-1, automatic), libxrandr2:i386 (1.4.2-1, automatic), libxpm4:i386 (3.5.10-1) End-Date: 2014-06-09 18:59:11

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Gaming on Cloud

  - by technomad

  Sometimes I wonder the pundits of cloud computing are way to consumed with the enterprise applications. With all the CAPEX / OPEX, ROI-talk taking the center stage, an opportunity to affect masses directly is getting overlooked. I am a self proclaimed die hard gamer. I come from the generation of gamers who started their journey in DOS games like Wolfenstein 3D and Allan Border Cricket (the latter is still a favorite pastime). In the late 90s, a revolution called accelerated graphics started in DirectX and OpenGL. Games got more advanced. Likes of Quake III and Unreal Tournament became the crown jewels of the industry. But with all these advancements, there started a race. A race of GFX giants ATI and NVIDIA to beat each other for better frame and image quality. Revisions to the graphics chipsets became frequent. Games became eye candies but at the cost of more GPU power / memory. Every eagerly awaited title started demanding more muscle power in graphics and PC hardware. Latest games and all the liquid smooth frame rates became the territory of the once with deep pockets who could spend lavishly on latest hardware. Enthusiasts like yours truly, who couldn’t afford this route, started exploring over-clocking, optimized hardware cooling... etc. to pursue the passion. Ever rising cost of hardware requirements lead to rampant piracy of PC games. Gamers were willing to spend on the latest titles, but the ones with tight budget prefer hardware upgrades against a legal copy of the game. It was also fueled by emergence of the P2P file sharing networks. Then came the era of Xbox and PS3s. It solved the major issue of hardware standardization and provided an alternative to ever increasing hardware costs. I have always admired these consoles, but being born and brought up in a keyboard/mouse environment, I still find it difficult to play first person shooters with a gamepad. I leave the topic of PC v/s Consol gaming for another day, but the bottom line is… PC gamers deserve an equally democratized solution. This is where I think Cloud Computing can come to rescue. It can minimize hardware requirements. Virtually end the software piracy and rationalize costs for gamers. Subscription based models like pay-as-you-play. In game rewards, like extended subscription credits for exceptional gamers (oh yes, I have beaten Xaero on nightmare in Quake III, time and again!) Easy deployment for patches and fixes. Better game AI. The list goes on and on… Fortunately, companies like OnLive are thinking in the same direction. Their gaming service is all set to launch on 17th June 2010 in E3 2010 expo in L.A. I wish them all the luck. I hope they will start a trend which will bring the smiles back on the face of budget gamers with the help of cloud computing.

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• fatal error C1034: windows.h: no include path set

  - by nathan

  OS Windows Vista Ultimate trying to run a program called minimal.c when i type at command line C:\Users\nathan\Desktopcl minimal.c Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 Copyright (C) Microsoft Corporation. All rights reserved. minimal.c minimal.c(5) : fatal error C1034: windows.h: no include path set i have set all the paths: C:\Users\nathan\Desktoppath PATH=C:\Program Files (x86)\Microsoft Visual Studio 8\VC\bin;C:\Windows\system3 ;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files (x86)\ATI Technologies\AT .ACE\Core-Static;C:\Program Files\Intel\DMIX;c:\Program Files (x86)\Microsoft S L Server\100\Tools\Binn\;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Bi n\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Java\jdk1. .0_13\bin;C:\Program Files (x86)\Autodesk\Backburner\;C:\Program Files (x86)\Co mon Files\Autodesk Shared\;C:\Program Files (x86)\Microsoft DirectX SDK (March 009)\Include;C:\Users\nathan\Desktop\glut-3.7.6-bin\glut-3.7.6-bin;C:\Program F les (x86)\Microsoft Visual Studio 8\Common7\IDE;C:\Program Files (x86)\Microsof Visual Studio 8\VC\PlatformSDK\Include;C:\Program Files (x86)\Microsoft Visual Studio 8\VC\PlatformSDK\Include\gl i have gone and made sure windows.h is in the directory im setting the path too. its in C:\Program Files (x86)\Microsoft Visual Studio 8\VC\PlatformSDK\Include. i have visual studio 2005 i have exhausted all possiblies any ideas

  Read the article

• Problem interfacing GSM USB modem to Java application

  - by varun

  I am working on an open-source application called FrontlineSMS which can be interfaced with GSM modems to send and receive SMS. The windows installer that is available through their website works fine. Since i wanted to modify it, I got the source code and built the jar and tried to launch it. When I plug in the GSM modem and launch the application, it sometimes detects the GSM device and i am even able to send and receive SMS. Or else 1.) I get the following error- Launching FrontlineSMS for Windows... Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. 2.) OR the application sometimes crashes by creating a log file which contains: # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x10009ccb, pid=4452, tid=3464 # # JRE version: 6.0_20-b02 # Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 ) # Problematic frame: # C [rxtxSerial.dll+0x9ccb] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x03433000): JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] siginfo: ExceptionCode=0xc0000005, writing address 0x038cfa10 Registers: EAX=0x038cfa08, EBX=0x00000003, ECX=0x7c802413, EDX=0x00000001 ESP=0x070ef800, EBP=0x070ef9e8, ESI=0x3360b898, EDI=0x03433000 EIP=0x10009ccb, EFLAGS=0x00010202 Top of Stack: (sp=0x070ef800) 0x070ef800: 3360b8a0 6d9fbc40 6da2ed98 ffffffff 0x070ef810: 070ef848 6d8f0a2c 6d8f0340 070ef95c 0x070ef820: 070ef864 00000dfb 03433000 038cfa08 0x070ef830: 00000007 00000001 00000001 0000000a 0x070ef840: 03433bf4 fffffffe 070ef8f4 6d8f0b7a 0x070ef850: 070ef95c 03433bf8 6da6f210 6da6f538 0x070ef860: 070ef868 03433bf4 27f18708 27f18708 0x070ef870: 22eb9810 03433bc4 00000001 070ef898 Instructions: (pc=0x10009ccb) 0x10009cbb: 45 1c 7c 19 8b 85 44 fe ff ff 8b 95 4c fe ff ff 0x10009ccb: 89 50 08 8b 55 f4 89 d0 e9 f8 01 00 00 c7 85 50 Stack: [0x070a0000,0x070f0000], sp=0x070ef800, free space=13e070ef334k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [rxtxSerial.dll+0x9ccb] C [rxtxSerial.dll+0xa05e] j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub V [jvm.dll+0xf049c] V [jvm.dll+0x17fcf1] V [jvm.dll+0xf0667] V [jvm.dll+0xf06dd] V [jvm.dll+0x11a2a0] V [jvm.dll+0x1ddb14] V [jvm.dll+0x17f96c] C [msvcr71.dll+0x9565] C [kernel32.dll+0xb729] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) =>0x03433000 JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] 0x0344b800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=4404, stack(0x03dd0000,0x03e20000)] 0x002b7800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3236, stack(0x008c0000,0x00910000)] 0x03f6f400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1888, stack(0x038e0000,0x03930000)] 0x03ec2400 JavaThread "AWT-Shutdown" [_thread_blocked, id=4300, stack(0x03740000,0x03790000)] 0x032d8c00 JavaThread "EmailServerHandler" [_thread_blocked, id=5708, stack(0x03830000,0x03880000)] 0x032f7000 JavaThread "Incoming message processor" [_thread_blocked, id=4184, stack(0x03650000,0x036a0000)] 0x03004c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4828, stack(0x035a0000,0x035f0000)] 0x0303f400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3768, stack(0x03500000,0x03550000)] 0x02b1e800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4164, stack(0x02dd0000,0x02e20000)] 0x02b18c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2936, stack(0x02d80000,0x02dd0000)] 0x02b17400 JavaThread "Attach Listener" daemon [_thread_blocked, id=5444, stack(0x02d30000,0x02d80000)] 0x02b15c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4976, stack(0x02ce0000,0x02d30000)] 0x02b0d800 JavaThread "Finalizer" daemon [_thread_blocked, id=5876, stack(0x02c90000,0x02ce0000)] 0x02b0c400 JavaThread "Reference Handler" daemon [_thread_blocked, id=5984, stack(0x02c40000,0x02c90000)] Other Threads: 0x02b0ac00 VMThread [stack: 0x02bf0000,0x02c40000] [id=4508] 0x02b29800 WatcherThread [stack: 0x02e20000,0x02e70000] [id=6080] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 7808K, used 4003K [0x22990000, 0x23200000, 0x27ee0000) eden space 6976K, 45% used [0x22990000, 0x22ca8e90, 0x23060000) from space 832K, 100% used [0x23060000, 0x23130000, 0x23130000) to space 832K, 0% used [0x23130000, 0x23130000, 0x23200000) tenured generation total 17208K, used 15192K [0x27ee0000, 0x28fae000, 0x32990000) the space 17208K, 88% used [0x27ee0000, 0x28db6100, 0x28db6200, 0x28fae000) compacting perm gen total 13824K, used 13655K [0x32990000, 0x33710000, 0x36990000) the space 13824K, 98% used [0x32990000, 0x336e5f98, 0x336e6000, 0x33710000) ro space 10240K, 51% used [0x36990000, 0x36ebae00, 0x36ebae00, 0x37390000) rw space 12288K, 54% used [0x37390000, 0x37a272d8, 0x37a27400, 0x37f90000) Dynamic libraries: 0x00400000 - 0x00424000 C:\WINDOWS\system32\java.exe 0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll 0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll 0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll 0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll 0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll 0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll 0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll 0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll 0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll 0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll 0x76d60000 - 0x76d79000 C:\WINDOWS\system32\Iphlpapi.dll 0x63560000 - 0x63568000 C:\Program Files\National Instruments\Shared\mDNS Responder\nimdnsNSP.dll 0x63550000 - 0x63559000 C:\WINDOWS\system32\nimdnsResponder.dll 0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll 0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll 0x10000000 - 0x10012000 C:\Documents and Settings\bjz677\Desktop\client run\rxtxSerial.dll 0x73d90000 - 0x73db7000 C:\WINDOWS\system32\crtdll.dll 0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll 0x038d0000 - 0x038d6000 C:\WINDOWS\system32\d3d8thk.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll 0x03930000 - 0x03977000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL 0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL VM Arguments: java_command: net.frontlinesms.DesktopLauncher Launcher Type: SUN_STANDARD Environment Variables: JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\bin CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip; PATH=C:\Program Files\Intel\MKL\10.0.2.019\ia32\bin;C:\Program Files\Intel\VTune\CGGlbCache;C:\Program Files\Intel\VTune\Analyzer\Bin;C:\Program Files\Intel\VTune\Shared\Bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;s:\datamart\bin;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\IVI\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\MATLAB\R2007b\bin;C:\Program Files\MATLAB\R2007b\bin\win32;C:\VXIPNP\WinNT\Bin;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\IA32\Lib;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\EM64T\Lib;C:\VXIPNP\WinNT\Bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_20\bin USERNAME=xxx OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3 Memory: 4k page, physical 2094960k(1063364k free), swap 4032536k(3038408k free) vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003) time: Wed Jun 16 11:53:40 2010 elapsed time: 45 seconds Anyone knows what caused this? Please answer keeping in mind I am new to Java. Thanks, Varun

  Read the article

• C# Application Calling Powershell Script Issues

  - by Ben

  Hi, I have a C# Winforms application which is calling a simple powershell script using the following method: Process process = new Process(); process.StartInfo.FileName = @"powershell.exe"; process.StartInfo.Arguments = String.Format("-noexit \"C:\Develop\{1}\"", scriptName); process.Start(); The powershell script simply reads a registry key and outputs the subkeys. $items = get-childitem -literalPath hklm:\software foreach($item in $items) { Write-Host $item } The problem I have is that when I run the script from the C# application I get one set of results, but when I run the script standalone (from the powershell command line) I get a different set of results entirely. The results from running from the c# app are: HKEY_LOCAL_MACHINE\software\Adobe HKEY_LOCAL_MACHINE\software\Business Objects HKEY_LOCAL_MACHINE\software\Helios HKEY_LOCAL_MACHINE\software\InstallShield HKEY_LOCAL_MACHINE\software\Macrovision HKEY_LOCAL_MACHINE\software\Microsoft HKEY_LOCAL_MACHINE\software\MozillaPlugins HKEY_LOCAL_MACHINE\software\ODBC HKEY_LOCAL_MACHINE\software\Classes HKEY_LOCAL_MACHINE\software\Clients HKEY_LOCAL_MACHINE\software\Policies HKEY_LOCAL_MACHINE\software\RegisteredApplications PS C:\Develop\RnD\SiriusPatcher\Sirius.Patcher.UI\bin\Debug When run from the powershell command line I get: PS M: C:\Develop\RegistryAccess.ps1 HKEY_LOCAL_MACHINE\software\ATI Technologies HKEY_LOCAL_MACHINE\software\Classes HKEY_LOCAL_MACHINE\software\Clients HKEY_LOCAL_MACHINE\software\Equiniti HKEY_LOCAL_MACHINE\software\Microsoft HKEY_LOCAL_MACHINE\software\ODBC HKEY_LOCAL_MACHINE\software\Policies HKEY_LOCAL_MACHINE\software\RegisteredApplications HKEY_LOCAL_MACHINE\software\Wow6432Node PS M: The second set of results match what I have in the registry, but the first set of results (which came from the c# app) don't. Any help or pointers would be greatly apreciated :) Ben

  Read the article

• weird swing heavyweight object lightweight objects problem

  - by Yoav Schwartz

  Hello, We have a problem in our swing based application since we've upgraded our java version from 6u5 to 6u18 (The application runs over WinXP). Our application contains a Canvas object which resides in a JFrame. The application draws things on the canvas. Every time we drag a lightweight swing object (popup or another frame) over the canvas, it has a refresh problem. It blinks - becomes black. The problem only resolves after we move the swing component away from the canvas and click on it again. We think this problem is related to the fact the the canvas is a heavyweight object. And we know there were changes done in the new versions of java on the mixing of heavyweight and lightweight objects issue. Some more details: 1) Our problem reproduces in java 6u14 and 6u16. 2) Everything works fine in java 6u5. Another strange thing: We have 2 types of stations running our application. The first type has a ATI FireGL7100 PCI-E graphics card. The second type has a Matrox G450 PCI graphic card. The problem does not reproduce on the Matrox based station in any java version. One more thing: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6829858 - looks similar to our problem. Is our problem familiar? Do you have any suggestions (workarounds, ideas how the difference in graphics cards is connected to this problem) Hope I was clear enough, Yoav

  Read the article

< Previous Page | 39 40 41 42 43 44 45  | Next Page >