Search Results

Search found 1516 results on 61 pages for 'cards'.

Page 37/61 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• Best motherboard power supply combo for backblaze server

  - by jin14

  Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

  Read the article

• how to run an AFS file server on a specific ethernet card (in Debian)

  - by listboss

  I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

  Read the article

• FreeNas running on ESXi - sometimes gets very slugish.

  - by Luma

  Hello everyone, I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the throughput of this VM just dies, for example right now it can't even handle streaming a song and when I tried to transfer a folder the speed goes from 10-400KB/s. Might I add at this point that the ESXi box has dual gigabit network cards plugged into a good solid gigabit switch and other linux and windows VM's are just fine I have seen speeds over 90MB/s (frequently) The server still has ram left over (plenty actually) and cpu is very low (500-1000mhz) any ideas what could cause this? thanks. Luc

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• Multiple SSL domains on the same IP address and same port?

  - by johnlai2004

  I set up an ubuntu 9.10 - apache2 - php5 server. I was under the impression that each valid SSL certificate (no domain wild cards) required it's own unique IP address and port number combination. But the answer to a previous question I posted is at odds with this claim: http://serverfault.com/questions/109766/ssl-site-not-using-the-correct-ip-in-apache-and-ubuntu Using the accepted answer, I was able to get multiple domains, each with it's own valid SSL to work on the same IP address and on port 443. I am very confused as to why the above answer works, especially after hearing from others that each SSL domain website on the same server requires its own IP+port combination. I am suspicious that I did something wrong. Can someone clear up the confusion? Websites currently using different SSL but on the same IP and Port are: https://www.yummyskin.com/ https://staging.bossystem.org/

  Read the article

• QR vcard with a photo

  - by Cayetano Gonçalves

  I am about to get a ton of business cards printed from my new corporation, and I am allowed to have a QR code on it, and I would really like to be able to add a photo to be attached to the vcard. I know in the raw vcard you can add a photo like this: BEGIN:VCARD VERSION:4.0 N:Gump;Forrest;;; FN: Forrest Gump ORG:Bubba Gump Shrimp Co. TITLE:Shrimp Man PHOTO:http://www.example.com/dir_photos/my_photo.gif TEL;TYPE=work,voice;VALUE=uri:tel:+1-111-555-1212 TEL;TYPE=home,voice;VALUE=uri:tel:+1-404-555-1212 ADR;TYPE=work;LABEL="42 Plantation St.\nBaytown, LA 30314\nUnited States of America" :;;42 Plantation St.;Baytown;LA;30314;United States of America EMAIL:[email protected] REV:20080424T195243Z END:VCARD But I can't find any way to include the photo field into a QR code, any suggestions would be greatly appreciated.

  Read the article

• Is there analog of aticonfig --set-powerstate for open source radeon driver?

  - by vava

  I'm running Ubuntu 9.04 on relatively old laptop with ATI Mobility x600 inside. On the last version of Ubuntu, when I was able to run proprietary fglrx driver, I was able to slow down graphic card by aticonfig --set-powerstate 1 and save some battery charge. Now I forced to run open source driver as ATI decided to drop support for old cards. But I can't find a way to control power states now except relying on DynamicClocks option in xorg.conf. But I really know better when and what powerstate I want, so is there a tool that let me change power state manually or at least let me somehow change the behavior of automatic power state selection?

  Read the article

• Hiding monitor from windows, working with it from my app only [closed]

  - by Mikhail

  I need to use a monitor as a "private" device for my special application, I want to use it as a flashlight of a sort and draw special patterns on it in full screen. I don't want this monitor to be recognized by OS (Windows 7) as a monitor. I.e. user should not be able to move mouse to that monitor, or change its resolution, or run screensaver on it or whatever. But I want to be able to interact with it from my application. Monitor is plugged using an HDMI cable to a video card (most probably nVidia). What is the simplest way to do this? All solutions are appreciated, including purchasing additional adapters or simple video cards, or any other special devices.

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by razass

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks.

  Read the article

• iptables: limiting bytes downloaded per IP per day?

  - by Miles

  On a public-facing web server, I'd like to limit the total bytes downloaded per IP address per day. For example, after a visitor downloaded 100MB, any additional requests would be dropped or rejected for the next 24 hours. Is it possible to accomplish this using iptables alone? The connbytes, connlimit, hashlimit, quota, and recent options all look promising, but the man page plays its cards close to the vest (e.g., "quota - Implements network quotas by decrementing a byte counter with each packet. --quota bytes The quota in bytes."). Would like to avoid using a proxy (like Squid) if possible.

  Read the article

• Getting network interface device name in powershell

  - by Grant

  I needed a powershell 2 script to get the name and device name of each interface like it is shown in network connections in control panel. Should be easy... $interfaces = Get-WmiObject Win32_NetworkAdapter $interfaces | foreach { $friendlyname = $_ | Select-Object -ExpandProperty NetConnectionID $name = $_ | Select-Object -ExpandProperty Name } However, $name comes back as "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client)", whereas in control panel it shows "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #69", because there are multiple cards. I can't find that number anywhere in the properties. How can I get both the Name and Device Name, exactly as shown in Network Connections, in powershell 2 on windows server 2008 r2?

  Read the article

• Is it possible to change the default scan folder on an Eye-Fi Wireless SD Card

  - by MichaelPh

  By default Eye-Fi cards scan the DCIM folder (and subfolders) used by most digital cameras for new images to upload. Is there a way of changing this to a different folder? In my particular case I'm using a Kodak photo scanner (P461) that uses a PHOTO(N) folder format to store the scanned images, as far as I know the device has no configuration interface to alter this setting so that doesn't seem to be an option. This topic on the Eye-Fi forums is the closest I've come to a solution, but a perfunctory investigation of Disk Probe doesn't make it obvious what needs to be modified on the card.

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• How to make the free Microsoft Virtual Hard Disk image to work with VirtualBox's simulated network c

  - by Jian Lin

  I have a Macbook Pro at work and installed the current VirtualBox (3.2.4) today. However, after using the VHD image for IE 7 on XP SP3 on this: http://www.microsoft.com/downloads/details.aspx?FamilyID=21eabb90-958f-4b64-b5f1-73d0a413c8ef&displaylang=en The Virtual Operating System (XP) just thought there is no network card provided by the PC (the virtual PC simulated by VirtualBox), even if I set up 4 network cards in Settings, as NAT, host only, etc. So the XP cannot browse any webpage at all... Does any integration package need to be added for VirtualBox to make it work and how? (is VirtualBox providing a "too advanced" network card so XP SP3 doesn't have the driver for it? thanks.

  Read the article

• Should I quit using Ifconfig?

  - by Zhen

  With the servers that mount Infiniband cards, when I use the ifconfig command I have the warning: Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes. Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly. Ifconfig is obsolete! For replacement check ip. Should I quit using ifconfig? It is deprecated in favor of ip command? Or it will be update in the near future.

  Read the article

• ATI Radeon HD 5770 Cooling

  - by Murtez

  I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

  Read the article

• Is there any Mac Pro hardware parts that can ONLY be purchased thru Apple?

  - by bigp

  I'd like to know if I need to be concerned about any hardware parts that I should include in a brand new Mac Pro purchase, instead of trying to hunt it down on 3rd party vendors (or whitelist vendors / hardware suppliers). The main components I'm interested for "upgradeability" are: Processors (If starting with Two 2.4GHz Quad-Core "Westmere"); RAM (If starting with the least possible, which seems to be 6 x 1GB); Video Cards (If starting with one ATI Radeon HD 5770, can a 2nd one be purchased elsewhere?) Hard-Drives (Since these are mounted in specialized trays [if I'm not mistaking], are they also sold elsewhere? And can they be bought as SSDs?) Power Supply (Do I need to be concerned about this at all, or does it auto-adjust depending on the new component upgrades?) I just want to be sure by choosing a Mac Pro with lower component specifications that I can in fact purchase upgrade parts cheaper elsewhere. Thanks!

  Read the article

• Sharing VPN from XP to Linux virtual

  - by user55513

  Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• How can I audit a Linux filesystem for files which have been changed or added within a specific time

  - by Bcos

  We are a website design/hosting company running several sites on a Linux server using Joomla 1.5.14 and recently someone was able exploit a vulnerability in the RW Cards component to write arbitrary files/modify existing files on our filesystem enabling them to do some nasty things to our customers sites. We have removed vulnerable modules from all sites but are still seeing some problems. We suspect that they still have some scripts installed and need a way to audit anything that has been changed or added in the last 10 days. Is there a command or script we can run to do this?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >