Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 37/252 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • Atheros LAN card driver, Linux compiling problem

    - by Ali Qocayev
    I have installed openSUSE 11.4 to my new workstation. It says that there is Attansic ETHERNET controller on board. But no devices seen. I typed: lspci and it returned: atheros communications device 1083. I have downloaded drivers. I'm trying to compile the driver. But I get the error: **Makefile:94: Linux kernel source not configured - missing autoconf.h. Stop** But I see autoconf.h presents on my system. What should I do ?

    Read the article

  • Smart card / auditable access for rack KVM tray

    - by Mark Henderson
    Is there such a thing as a KVM Tray for a standard 19" rack whose use can be validated by a smartcard (or some other auditable authentication method)? It looks like we have a security requirement where just because users have a key to the rack doesn't mean they will be allowed to use the console inside the rack, and rather than just lock the console (and keep track of who has keys), we would prefer to be able to audit the actual user that was attached at the KVM. (It's worth mentioning that I'm aware of the Raritan devices, but they surely can't be the only ones) (If these things existed, I don't think half of the tratoirs that somehow manage to infiltrate CTU on the TV show 24 would ever get away with anything)

    Read the article

  • Wild Card DNS setup problems

    - by Phil Jackson
    Hi, this is my firast time with dedicated servers and im having problem setting up a wildcard sub-domain. I previously tried * /-----/ 14400 /-----/ IN /-----/ A /-----/ (serverip) waited 30 hours and nothing. so i then tried * /-----/ 14400 /-----/ IN /-----/ CNAME /-----/ actvbiv.co.uk. waited another 30 hours, nothing Im now trying; *.actvbiz.co.uk /-----/ 14400 /-----/ IN /-----/ CNAME /-----/ actvbiv.co.uk. Am i doing this correctly? using WHM. Regards, Phil Jackson

    Read the article

  • No compatible network card

    - by sbintcliffe
    Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

    Read the article

  • Eyefinity with lower power graphic card?

    - by terrani
    Hi, I am looking for a graphic that supports Eyefinity, but with lower power. What I mean by "lower power" is lower performance and lower power literally. I don't need performance and heat of ATI 5 Series, but I love their multi-monitor supports and price range. What options do I have?

    Read the article

  • Cheapest dedicated PhysX card?

    - by davr
    Say I have a nice powerful ATI Radeon GPU but I would like to have PhysX support as well. What is the cheapest NVidia GPU I can buy to add on to my system that will support PhysX? (I already know about the driver hacks required to get both cards running at once)

    Read the article

  • Using 2-port LSI 2308-8e card to control 24 SAS HDDs

    - by GregC
    I would like to rely on a RAID-on-chip solution to control 24 SAS hard drives in a direct-attached environment. How would you approach this to get best bandwidth given that I'd like to spend less than $10,000 on the interconnect. I've read that LSI 2308 chip can easily handle 8-drive SSD RAID6 in hardware. I'd like to harness its power to control 24 SAS hard drives over an expander in an external enclosure. Currently I use an Infortrend S24S-G2240 external enclosure. It provides its own controller and expander. I'd like to use LSI 2308 controller for RAID6 somehow instead of the mystery controller in the enclosure. P.S. I tried to create SAS-expander as a tag, but my rep on this site is low.

    Read the article

  • Re-Initialize RAID-0 in software after card failure

    - by Ben
    I'm working on a Friend's WD MyBook "1TB" HDD that is not mounting. When I got in to it, I discovered that it is really 2 500GB HDD's set up as RAID-0. It appears that the drives themselves are fine, but that the logic board has failed. My questions is this: can I re-initialize the RAID-0 using software RAID so that I can recover the data to another drive? If so, how and which software RAID would be best (Preferably open source. any platform OK).

    Read the article

  • Win 7 Netbook refuses to ping JetDirect card (all other PCs work)

    - by Luke Puplett
    I have an odd thing occuring here. From a Windows 7 netbook, I cannot ping an HP printer on the network, while all other machines (Win7/Vista) can. And the netbook can also ping everything else on the LAN. Example showing that the netbook can ping 192.168.3.4 but not 3.6. C:\Users\backdoor>ping w7ue1m Pinging w7ue1m.corp.biz.co.uk [192.168.3.4] with 32 bytes of data: Reply from 192.168.3.4: bytes=32 time=7ms TTL=128 Reply from 192.168.3.4: bytes=32 time=4ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Reply from 192.168.3.4: bytes=32 time=2ms TTL=128 Ping statistics for 192.168.3.4: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 7ms, Average = 3ms C:\Users\backdoor>ping uktnprint1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Reply from 192.168.3.0: Destination host unreachable. Ping statistics for 192.168.3.6: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),`enter code here` The IPCONFIG result for the netbook is fine. IPv4 Address. . . . . . . . . . . : 192.168.3.0 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Most unusual network thing I've seen in years. I must reiterate that only this netbook is having trouble pinging/printing. Thanks, Luke ** UPDATE ** Am now on a Vista box, and here's the IPCONFIG: IPv4 Address. . . . . . . . . . . : 192.168.3.3 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : 192.168.1.1 Pinging uktnprint1.corp.biz.co.uk [192.168.3.6] with 32 bytes of data: Reply from 192.168.3.6: bytes=32 time=2ms TTL=60 Firewall is off. I'll look into the chance of an IP conflict because it's the only thing I can think of - compare arp caches of each machine. Cheers!

    Read the article

  • Upload of photos from cf card to pc is super slow

    - by Sharon
    I have a new custom built pc. It has 8B of RAM and was working like a dream. Suddenly it is super slow and taking hours to download photos that used to take just minutes. I notice that there is 8GB RAM but only 3,25GB usable. could this be the problem? If so how to I change it? I'm using Windows 7

    Read the article

  • how to run an AFS file server on a specific ethernet card (in Debian)

    - by listboss
    I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

    Read the article

  • Workstation Card

    - by david
    I am going to buy an HP EliteBook 8740w. The problem is it comes with Nvidia quadro 2800m and ati 7820m firepro 3d? please advise which is better?

    Read the article

  • Which is a better graphics card

    - by michael
    Hi, Can someone please give me advice regarding which of the following is a better graphics cards? Radeon HD4650 1GB NVIDIA Geforce GT240M 1GB Or which brand is better in general? Radeon? or Nvidia? Thank you.

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • Notebook with NVIDIA Optimus not switching video card in games

    - by user140739
    I have a Samsung RC720 notebook with Intel Integrated Graphics and NVIDIA GeForce GT 520M. As you can see it has two video adapters and Optimus is supposed to switch between them. But when I choose dedicated GPU in NVIDIA Control Panel and try to run, for example, GTA IV, it uses integrated graphics and I get very poor performance. I have already installed last NVIDIA and notebook drivers, chose high-performance in NVIDIA Control Panel, tried to execute with "Run with graphics processor..." context option and so on. Thanks for help.

    Read the article

  • Video card recommendation?

    - by user26453
    These are my requirements: Can support latest DirectX/OpenGL standards Dual DVI output required Less than $100 Does not need to excel at gaming Does need to provide hardware acceleration for Windows 7 and Visual Studio 2010 via WPF. Bonus points: Supported in OSx86 land. Quiet and low power. I tend to lean towards nvidia because I'm used to their drivers and their software (nview, etc.)

    Read the article

  • good PCI-e Wireless card for Windows7?

    - by benwebdev
    Hi I've just build a 64bit Windows 7 PC but am unhappy with the piddly performance of the linksys USB wireless dingle I've used. Can anyone suggest a good PCIe alternative that will be stronger for connection and maybe faster. I dont see why my desktop should show a weaker performance on wireless than my laptop when its sat next to it or even my Palm Pre for that matter. any thoughts? UK based max around £60ish. thanks, Ben

    Read the article

  • VMWare hypervisor with only 1 network card?

    - by Rafiq Maniar
    VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

    Read the article

  • I need a wirless interenet card thingy for my stationary computer

    - by user60859
    Going to move my stationary computer and hook it up to the TV. Which is far away from the wireless router. So i'm going to need a way to go on the Internet wirelessly from my stationary computer. I was looking at some of those.. wireless pci adapter things. But i have no idea which one would be compatible with my computer. How can i tell? oh i have a pentium 4, Windows XP like 600 megs of ram in case any of that matters.

    Read the article

  • Dual NVidia graphics cards in Ubuntu / xorg.conf mania

    - by John Zwinck
    I have two NVidia graphics cards: Quadro NVS 295 (PCI Express, dual DisplayPort outputs) GeForce FX 5200 (PCI, DVI and VGA outputs) I have three identical monitors, two on DisplayPort and one on DVI. I'm on Ubuntu Hardy (and cannot currently dist-upgrade for separate reasons). I use the "nvidia" driver. What's new is the GeForce card and the third monitor. I currently have the dual DisplayPort monitors working fine. Here are the display-related parts of my xorg.conf: Section "ServerLayout" Identifier "Default Layout" Screen "PCI-Express Screen" 0 0 # adding this makes X fail to start: Screen "PCI Screen" 0 Inputdevice "Generic Keyboard" Inputdevice "Configured Mouse" EndSection Section "Module" Load "glx" # not sure why/if this is needed EndSection Section "Monitor" Identifier "DELL 2408WFP" Option "DPMS" EndSection Section "Device" Identifier "NVIDIA Quadro NVS 295" Driver "nvidia" Option "RenderAccel" "true" Screen 0 BusID "PCI:2:0:0" EndSection Section "Device" Identifier "NVIDIA GeForce FX 5200" Driver "nvidia" Option "RenderAccel" "true" Screen 1 BusID "PCI:6:4:0" EndSection Section "Screen" Identifier "PCI-Express Screen" Device "NVIDIA Quadro NVS 295" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+1200, 1920x1200 +0+0" EndSection Section "Screen" Identifier "PCI Screen" Device "NVIDIA GeForce FX 5200" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+0" EndSection I use nvidia-settings to configure my monitors, and it does not show the second GPU. lspci, though, shows: 02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd 06:04.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] Which is where I got the BusID settings for the two devices (when I just had one device, I didn't have any BusID listed...and adding the BusID hasn't broken anything). What am I missing? How can I make nvidia-settings show my second GPU so I can then configure its monitor?

    Read the article

  • Reducing video mode switching during Linux boot

    - by Zack
    When I boot up my desktop computer, which only has Linux on it, the video mode and/or console font gets switched four times: When GRUB starts, it switches from 80x25 text to a graphical mode so it can draw a pretty background behind its menu; GRUB then goes back to 80x25 text after I pick something from the menu; When the KMS driver for my video card loads, it switches to a much higher-resolution text mode (I don't know if this is a hardware text mode or not); Finally X starts and it goes graphics and stays that way. I think this last switch does not change the resolution of the video mode, only the graphicalness. I'd like to get rid of as many of these mode switches as possible. Ideally, when GRUB takes over from the BIOS it would go directly to the same high-resolution text mode that the KMS driver selects, and the display would stay in that mode till X starts and brings up graphics. I am under the impression that this is possible by mucking with the kernel command line and/or the GRUB console module load parameters, but I don't know the details. GRUB 1.98+20100706, kernel 2.6.32.15 using Nouveau video drivers. Distro is Debian unstable. Please no answers that involve recompiling anything or cobbling together bleeding-edge kernel/driver combinations, I don't care enough about this to go to that much trouble. EDIT: Tobu suggests setting GRUB_GFXMODE to the full pixel resolution of the monitor, and GRUB_GFXPAYLOAD_LINUX=keep to avoid the mode switch after the menu goes away. This does part of what I want, but winds up being worse overall. There's no mode switch after the menu, but there's still a painfully-slow screen repaint (I should probably just give up on GRUB's gfxmode, it's waaaay too slow at 1920x1200). More seriously, there's now a double mode switch when nouveaufb loads, along with fun-looking error messages in dmesg [ 5.923798] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ba5f4600 [ 5.923802] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver [ 5.923821] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 1 ("PFIFO_INTR" message repeats 400+ times) [ 5.925609] Console: switching to colour dummy device 80x25 [ 5.925802] Console: switching to colour frame buffer device 240x75

    Read the article

  • What is the replacement of the floppy

    - by alexanderpas
    While CD (and to an lesser extend DVD) disks have reached the price-point of the floppy, they have one significant downside, it is WORM (Write-Once Read-Many) media, allowing it to be used only one single time, and you need to be explicit in writing the data to the actual media (you need to burn it.) While CD-RW solves the "use only once" problem, it is still EWORM (Erasable Write-Once Read-Many) media, which still means you need to be explicit in writing the data to the actual media (you still need to burn it.), and also, you still need to be very explicit in erasing it. (simple delete is not possible.) Okay, we can use a CD-RW in Packet Writing mode, however the downside to that, is that this mode is not very universal, and also, not the native mode of the media. Now, while USB-sticks and SD-cards may not have the poblems of the CD, they have a whole other kind of problem: their PRICE! USB-sticks and SD cards are generally 10 to 100 times as expensive as diskettes per piece. SD-cards, in addition have an added problem, because they need a reader to operate. While it is a very standard thing, it is not default equipment on the computer like the CD drive or USB port (or historically the diskette drive). You wouldn't give out an USB stick or SD card with a 100 kB text file, not caring weither you would get it back or not. So, to recap: CD & DVD are basically WORM media. SD cards and USB sticks are relatively expensive. SD cards also needs special readers. Diskettes have a very low data-rate Diskettes have a very low storage capacity. Now, is there a media out there that solves all these problems, or is there a way to get (very) small USB sticks or SD cards for a very low price (as they're the closest thing to diskette).

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >