Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 38/252 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Distortion problem with Creative audio equalizer

    - by e-t172
    Hi, I have a problem with the Creative Console EQ, I don't know if it's fixable or not (is the EQ software or hardware on these cards?). Basically, I have enormous distortion with certain sounds in the 30 - 125 hz range. When this happens I get some sort of "frrzzzz" (sorry, I'm french and don't really know the correct english word for that) on top of the original sound. I have a Sound Blaster Audigy SE. I'm using the Daniel_K drivers, on Windows 7 Profesionnal x64. All the effects are disabled except EQ. Steps to reproduce Put the card in 24bit/96khz mode. The problem is also present with 16bit/48khz but seems to be less audible. In the Creative Console, use the following EQ: (full size) Play this sound at a reasonably high volume. You should hear distortion on the two "booms". Especially the second one. Disable Creative EQ. Play the sound in an application with an integrated EQ (e.g. foobar2000, ffdshow) using the same EQ parameters. There is no distortion. Conclusion: the Creative EQ is broken. Is anyone having the same problem? I'm also interested in the results with other Creative cards or even other brands soundcards with a similar EQ feature.

    Read the article

  • Radeon 6950 - Garbling of text and graphics in certain Windows only

    - by Greg
    This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

    Read the article

  • Radeon 6950 - Garbling of text and graphics in certain Windows only

    - by Greg
    This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

    Read the article

  • Graphics Artifacts/ Texture Flickering

    - by Cerin
    Hey I been having some problems with artifacts in games. Sometimes textures flicker. Artifacts of various shapes and sizes show up usually after a couple games of dota 2. I built my computer almost exactly one month ago and it has been doing this pretty much from the start except before the artifacts I believe just flashed on screen fast enough to where I couldn't tell what it was but I still noticed. In dota I've seen green triangular artifacts among other things. I've tried running Furmark for a while but even though it pushes the gpu much harder than dota 2, there are still no artifacts. It maxes in furmark at about 60C and running every game I've tried on it at 40C. CPU and system temp don't usually get higher than 40C either. These are my system specs: Gigabyte Z68 Intel Motherboard 16 GB Gskill Ripjaws SDRAM DDR3 Sapphire Radeon HD 7770 GHz edition Intel Core i5-2500k (with built in gpu) Corsair 750 Watt PSU windows 7-64 bit I have the latest drivers for everything. What should I do about this? Try to RMA my graphics card? Are there other things that could be causing this?

    Read the article

  • Windows 7 Media Center: sometimes no sound on a TV channel

    - by torbengb
    Problem Sometimes, recorded TV shows have no sound. This is of course very annoying because the recorded show is worthless. Also, when switching channels while watching live TV, sometimes a channel has no sound. This is always solved by switching channel again and then back (most often, once will do the trick). Media Center doesn't do this trick by itself when recording of course, so that's the bigger issue - but the cause is certainly the same. Details The computer is running a newly installed Windows 7 and Windows Media Center. It has 2 different tuner-cards installed. Both are installed with signed and up-to-date Win7 drivers and appear OK in Device Manager. Both tuners get the same antenna signal, from a split cable from the wall. The cable delivers analog cable TV (40+ channels) and digital cable TV (4 channels) at the same time. Both tuners have been configured to receive both analog and digital channels. This only happens with analog channels. How can I fix the no-sound problem? Update: I've now spent some time with the computer to try and pinpoint the problem, but I've had little success so far: I flipped through the channels until one didn't have sound, then I disconnected the antenna cable from one of the tuners. It was the right one because then the video also went away. I flipped lots more channels to see if the other card also would come up mute once but I never had a channel without sound. It might still be possible, I don't know. Then I disconnected the "good" tuner and connected the "bad" tuner and again flipped lots of channels but again I never had a channel without sound. It seems to me that the problem is erratic. It happens on any channel, and I haven't ruled out yet that it only happens on one tuner.

    Read the article

  • How to boost playback volume in real time on media recorded with a very low volume.

    - by L Marksman
    I have never heard a satisfactory answer to this often misunderstood question, let me explain. Lets say I have a sound card and earphones/speakers that can play back audio loud enough in most cases. This is great but the problem is that you always find people who do not know how to record audio, from Youtube video's to music. So now you end up with a audio playback that only uses 10% or less of the capacity of your sound hardware, in vista/win 7 you will see this frequently in the mixer with the volume pushed up to max but the green sound level only goes up a millimeter or two. I am looking for (preferably free) software or a method to boost the sound level of any audio from any source in real time to use more of my hardware capacity similar to what VLC media player can do. Oh and please, do not tell me it is impossible. I am not trying to boost the volume past what my hardware is capable of, I am just trying to use my hardware's full capacity. Also please do not tell met to buy new hardware, I know I can use hardware amplification, I don't want to (like many others) spend money on a simple little problem like this. Thanks!

    Read the article

  • Dual Monitor/Xinerama not working; cannot even detect on-board graphic card

    - by Steven H
    I have Kubuntu 12.04 and two identical VGA monitors. One I plugged via DVI-VGA adapter into the DVI port of my discrete AMD Radeon HD 6670, the other into the VGA port of my on-board graphic card (Radeon HD 6410D). After installing Kubuntu I got a black screen, so I booted with nomodeset and installed AMD's catalyst drivers but only the monitor plugged into the discrete graphic card worked. Using lspci I saw that the on-board graphics was not listed. Then I found in the BIOS settings the options "Surround View" and "Onboard Dual Link DVI" both disabled. After enabling both, the on-board graphics card shows up in lspci but in amdcccle, it only shows as [Uknown display]Uknown adapter. When I try to enable xinerama, I get a black screen after rebooting on both monitors. I tried several options and hints from the web but nothing worked so far. I also reinstalled the AMD drivers several times. What should I do?

    Read the article

  • What video graphic card would permit ubuntu's standard driver to work well?

    - by Rick
    I installed ubuntu 12.04. All seemed well until I installed the nvidia driver. Then crashola! This situation is untenable. It seems I cannot trust nvidia, and it seems that I cannot rely on ubuntu gurus to test 3rd party drivers. So, apparently some video card manufacturers do not care enough about the linux market to test their drivers, or are there too many 3rd party video cards so that ubuntu folks do not test any 3rd party video drivers? Hence the question: What video graphic card would permit me to use ubuntu's standard driver so that I do not have to rely on nvidia's or any other 3rd-party driver? Perhaps I could then install THAT card and have things work? The ubuntu standard driver actually worked prior to installing the nvidia driver, but not well, and that was because the display flickered, and flickering gives me a headache.

    Read the article

  • Can I use HDMI with the Intel card of my optimus laptop?

    - by Byakkun
    I have an Dell Inspiron 7110 that has a Sandy bridge i7 and a discrete graphics card (GeForce 525M) from Nvidia. I want to be able to use my 23' display at home throungh hdmi but Intel integrated graphics card does not work with hdmi (VGA is not an option). I have tried bumblebee but it does not work. How could I use the hdmi port for my monitor. Using only the nvidia card with some driver is what I tought i could do but i don't want to give up composing because I use gnome-shell. Any options for doing this?

    Read the article

  • Using libvlc to save capture card stream.

    - by beta
    Could anyone give an example of opening a stream such as a capture card and saving it to a file? There is very little documentation of vlc's api for sout and streaming. Beyond that, is there a programmatic way get a list of Capture Devices under windows? If there isn't, linux is an option. Thanks.

    Read the article

  • Communicating with a MW-3170 magnetic card reader

    - by stukelly
    One of our customers has asked if we can interface with a serial magnetic card reader/encoder from a old EPOS system. The device has no make only the MW-3170 model number. Does anybody know how I can communicate with the device? I am currently looking for a programming manual on Google, without much success.

    Read the article

  • TV audio processing with TV capture card

    - by Jonathan Barbero
    Hello, I'm looking for an open source library or framework to process audio signal from a TV capture card. The idea is to detect TV ad spots and register the time and the channel where them happends. I never worked in something like this, so, any information, link, idea is welcome. Thanks in advance!

    Read the article

  • Problem in GWT realex integration while registering new card

    - by Rupeshit
    In my application I am using realex to pay amount.While doing that I registered new user with realex but after that when I tried to add new card then I am getting response from realex that Sha1 hash incorrect.I checked sha1 hash structure it is all right but still I am getting this error.If anyone know this so please tell me.

    Read the article

  • Writing a text file to smart card c#

    - by Akshay
    What I want to do is write a text file to a smart card and read it. WindSCard is the dll to be used but but it's functions are very cryptic. Is there any FREE wrapper available over it and is there any tutorial that does what I want to do.

    Read the article

  • Android: getting thumbnails from specific location on sd card

    - by dykzei
    AFAIK accessing thumbnails for images via MediaStore.Images.Thumbnails would generate thumbnails at first attempt, and that's what i need to perform against specific location on sd card. The question is how to make valid URI to content under specific folder? All answers i can find use just MediaStore.Images.Thumbnails.EXTERNAL_CONTENT_URI as uri to make managedQuery. And result of it is Cursor that points to all sdcard images, while none examples can be found on how to access only specific folder.

    Read the article

  • Windows Mobile: "My network card connects to" registry settings

    - by Martin Robins
    Can anybody please tell me the registry setting(s) that are affected in Windows Mobile 6.1 when a user selects Start - Settings - Connections - Wi-Fi and then changes the value of the "My network card connects to" drop down list on the "Network Adapters" tab? I have a device that seems to default this to "The Internet" when in fact the Wi-Fi connects to the corporate network and I would like to be able to change this programatically rather than expecting 250+ users to have to do it manually every time they reboot their devices. Thanks.

    Read the article

  • C++ Deck and Card Class Error with bad alloc

    - by user3702164
    Just started learn to code in school. Our assignment requires us to create a card game with card,deck and hand class. I am having troubles with it now and i keep getting exception: std::bad_alloc at memory location. Here are my codes right now CardType h: #ifndef cardType_h #define cardType_h #include <string> using namespace std; class cardType{ public: void print(); int getValue() const; string getSymbol() const; string getSpecial() const; string getSuit() const; int checkSpecial(int gscore) const; cardType(); cardType(string suit,int value); private: int value; string special; string symbol; string suit; }; #endif CardType cpp: #include "cardType.h" #include <iostream> #include <string> using namespace std; void cardType::print() { cout << getSymbol() << " of " << getSuit() << ", having the value of " << getValue() << "."<< endl <<"This card's special is " << getSpecial() << endl; } int cardType::getValue() const { return value; } string cardType::getSymbol() const { return symbol; } string cardType::getSpecial() const { return special; } string cardType::getSuit() const { return suit; } cardType::cardType(){ value=0; symbol="?"; special='?'; suit='?'; } cardType::cardType(string s, int v){ suit = s; value = v; switch(v){ case 1: // Ace cards have a value of 1 and have no special type symbol="Ace"; special="None"; break; case 2: // 2 cards have a value of 2 and have no special type symbol="2"; special="None"; break; case 3: symbol="3"; // 3 cards have a value of 3 and have no special type special="None"; break; case 4: symbol="4"; // 4 cards have a value of 0 and have a special type "Reverse" which reverses the flow of the game special="Reverse"; value=0; break; case 5: symbol="5"; // 5 cards have a value of 5 and have no special type special="None"; break; case 6: symbol="6"; // 6 cards have a value of 6 and have no special type special="None"; break; case 7: symbol="7"; // 7 cards have a value of 7 and have no special type special="None"; break; case 8: symbol="8"; // 8 cards have a value of 8 and have no special type special="None"; break; case 9: symbol="9"; // 9 cards have a value of 0 and have a special type "Pass" which does not add any value to the game and lets the player skip his turn. special="Pass"; value=0; break; case 10: symbol="10"; // 10 cards have a value of 10 and have a special type "subtract" which instead of adding the 10 value to the total game it is subtracted instead. special="Subtract"; value=10; break; case 11: // Jack cards have a value of 10 and have no special type symbol="Jack"; special="None"; value=10; break; case 12: // Queens cards have a value of 10 and have no special type symbol="Queen"; special="None"; value=10; break; case 13: symbol="King"; // King cards have a value of 0 and have a special type "NinetyNine" which changes the total game score to 99 reguardless what number it was previously special="NinetyNine"; value=0; break; } } int cardType::checkSpecial(int gscore) const{ if(special=="Pass"){ return gscore; } if(special=="Reverse"){ return gscore; } if(special=="Subtract"){ return gscore - value; } if(special=="NinetyNine"){ return 99; } else{ return gscore + value; } } DeckType h: #ifndef deckType_h #define deckType_h #include "cardType.h" #include <string> using namespace std; class deckType { public: void shuffle(); cardType dealCard(); deckType(); private: cardType *deck; int current; }; #endif DeckType cpp: #include <iostream> #include "deckType.h" using namespace std; deckType::deckType() { int index = 0; int current=0; deck = new cardType[52]; string suit[] = {"Hearts","Diamonds","Clubs","Spades"}; int value[] = {1,2,3,4,5,6,7,8,9,10,11,12,13}; for ( int i = 0; i <= 3; i++ ) { for ( int j = 1; j <= 13; j++ ) { deck[index] = cardType(suit[i],value[j]); index++; } } } cardType deckType::dealCard() { return deck[current]; current++; } Main cpp : #include "deckType.h" #include <iostream> using namespace std; int main() { deckType gamedeck; cout << "1" <<endl; cardType currentCard; cout << "2" <<endl; currentCard = gamedeck.dealCard(); cout << "3" <<endl; return 0; } I keep getting bad_alloc at the currentCard = gamedeck.dealCard(); I really do not know what i have done wrong.

    Read the article

  • I need openGl 2.0 but my graphic card support 1.5

    - by Milos
    I want to start with my webGL project and minimal require is my graphic card support openGL 2.0. Problem exist because i have intel laptop with integrated intel 965 graphic media accelerator and driver is up to date and it support openGL 1.5. Is there any solution how to update my graphic carf to support 2.0? Is this possible? thx, Milos

    Read the article

  • How to display QuickContact card from widget

    - by alejom99
    I have a widget that displays the picture of some of my contacts and I would like to display the QuickContact card when the user taps on one of the pictures. I know I should be using the method ContactsContract.QuickContact.showQuickContact(), but it requires a View or a Rect as one of the input parameters. My problem is that Widgets only have RemoteViews, so I'm no sure what to pass as the View or Rect parameter. Any ideas would be appreciated.

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >