Search Results

Search found 3153 results on 127 pages for 'debian lenny'.

Page 37/127 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Issue with multiple bridging for KVM hosts

  - by Henry-Nicolas Tourneur

  I'm using KVM and libvirt on my host (Debian lenny) + 2 bridges per guest (one for mgmt, one for public traffic). That setup isn't stable at all, sometimes I can do pings to a management ip, sometimes not. I don't know if my bridging paramateres are correct, could you check ? or if there is anything wrong ... Please also note that interface on guest doesn't flap and that I got not logs on my host. Of course forwarding is enabled. iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.128 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.128 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.240 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.240

  Read the article

• Write permissions on uploaded files - Linux, Apache, PHP

  - by letseatfood

  I am working on a PHP script that transfers files using FTP functions. It has always worked on my production server (which is a hosting service). The development server I have just setup (I am a novice to servers) is Debian Lenny with Apache2, PHP5, and MySQL5. The file transfer works correctly, but once the file has been written to the server, it has permissions of 600. This makes it impossible for me to view the file (JPEG) in the web browser, as permission is denied. I have scoured the internet and even broken my server installation and reinstalled it trying to figure this out (which has been fun, nonetheless!). I know it is unwise to set 777 permissions on public accessible files, but even that will not solve the problem. The only thing that works is if I chmod 777 thefile.jpg after it has been transferred, which is not a working solution. I tried changing the owner of my site files to www-data per this post, but that also does not work. My user is mike, and it still does not work whether the owner of the files is mike or root. Would somebody point me in the right direction? Thanks! And, of course, let me know if I can clarify anything.

  Read the article

• Postfix auto create Maildir

  - by Eugene

  I've been beating my head against a wall for a while now on this one. Basically, here is the rundown: Our MX record points to a frontend SMTP server, which contains aliases for actually routing the mail. No alias, no access to the backend storage server, which is what our clients connect to. I'm upgrading the backend email server. Currently, a user is created for every email user on the server, which creates the mailbox. On the new server, everything autheticates through PAM to an LDAP server (all of which is working properly). My goal is to get Postfix to create the Maildir directory for the user automatically. This works fine when I have the /home directory with 777 permissions, but for obvious reasons, this should be avoided. I would like to do this with 775 permissions on /home with a group owner of whatever user Postfix is running as, but I can't seem to figure out what user to use. With the 777 permissions, the /home/$user/Maildir directory is created on message delivery. Does anybody know how I can do this without 777 permissions? The system I am working on is a 64-bit Debian Lenny 5.07 install. Any advice would be appreciated.

  Read the article

• Lot's of errors by insserv on apt-get operations after trying to install tomcat

  - by yankee

  I wanted to install tomcat on my Debian 6.0.4 machine. I tried apt-get install tomcat6-user which worked fine. But then I changed my mind about the user installation and wanted to install the package tomcat6. This resulted in a bunch of errors (see below). Now whatever I try to do with apt-get or with aptitude (trying to remove tomcat6-user, trying to remove tomcat6, trying to perform an apt-get upgrade,...) just results in the same list of errors. How did I manage that? And how can I fix it? # apt-get install tomcat6 Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: authbind Suggested packages: tomcat6-docs tomcat6-admin tomcat6-examples libtcnative-1 The following NEW packages will be installed: authbind tomcat6 0 upgraded, 2 newly installed, 0 to remove and 32 not upgraded. Need to get 56.6 kB of archives. After this operation, 442 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://mirror.hetzner.de/debian/packages/ squeeze/main authbind amd64 1.2.0 [17.3 kB] Get:2 http://mirror.hetzner.de/debian/security/ squeeze/updates/main tomcat6 all 6.0.35-1+squeeze2 [39.3 kB] Fetched 56.6 kB in 0s (441 kB/s) Preconfiguring packages ... Selecting previously deselected package authbind. (Reading database ... 34717 files and directories currently installed.) Unpacking authbind (from .../authbind_1.2.0_amd64.deb) ... Selecting previously deselected package tomcat6. Unpacking tomcat6 (from .../tomcat6_6.0.35-1+squeeze2_all.deb) ... Processing triggers for man-db ... Setting up authbind (1.2.0) ... Setting up tomcat6 (6.0.35-1+squeeze2) ... Creating config file /etc/default/tomcat6 with new version Adding system user `tomcat6' (UID 108) ... Adding new user `tomcat6' (UID 108) with group `tomcat6' ... Not creating home directory `/usr/share/tomcat6'. insserv: warning: script 'S99iptables-custom' missing LSB tags and overrides insserv: warning: script 'iptables-custom' missing LSB tags and overrides insserv: There is a loop at service iptables-custom if started insserv: There is a loop between service rmnologin and mountnfs if started insserv: loop involving service mountnfs at depth 6 insserv: loop involving service networking at depth 5 insserv: loop involving service kbd at depth 9 insserv: There is a loop between service rmnologin and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 5 insserv: loop involving service mountall at depth 4 insserv: There is a loop between service iptables-custom and lvm2 if started insserv: loop involving service lvm2 at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rmnologin if started insserv: There is a loop between service iptables-custom and checkroot if started insserv: loop involving service checkroot at depth 2 insserv: loop involving service keyboard-setup at depth 1 insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Max recursions depth 99 reached insserv: loop involving service courier-imap-ssl at depth 1 insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: loop involving service hwclockfirst at depth 2 insserv: loop involving service mountoverflowtmp at depth 9 insserv: loop involving service checkfs at depth 6 insserv: loop involving service mdadm-raid at depth 4 insserv: loop involving service hostname at depth 3 insserv: There is a loop between service iptables-custom and ifupdown-clean if started insserv: loop involving service ifupdown-clean at depth 5 insserv: There is a loop between service rmnologin and mountall if started insserv: There is a loop between service iptables-custom and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 1 insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: loop involving service mtab at depth 6 insserv: There is a loop between service rmnologin and mountoverflowtmp if started insserv: Starting iptables-custom depends on rmnologin and therefore on system facility `$all' which can not be true! insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing tomcat6 (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: tomcat6 E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Debian/OVH: How to configure multiple Failover IP on the same Xen (Debian) Virtual Machine?

  - by D.S.

  I have a problem on a Xen virtual machine (running latest Debian), when I try to configure a second failover IP address. OVH reports that my IP is misconfigured and they complaint they receive a massive quantity of ARP packets from this IPs, so they are going to block my IP unless I fix this issue. I suspect there's a routing issue, but I don't know (and can't find any useful info on the provider's website, and their support doesn't provide me a valid solution, just bounce me to their online - useless - guides). My /etc/network/interfaces look like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address AAA.AAA.AAA.AAA netmask 255.255.255.255 broadcast AAA.AAA.AAA.AAA post-up route add 000.000.000.254 dev eth0 post-up route add default default gw 000.000.000.254 dev eth0 # Secondary NIC auto eth0:0 iface eth0:0 inet static address BBB.BBB.BBB.BBB netmask 255.255.255.255 broadcast BBB.BBB.BBB.BBB And the routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 000.000.000.254 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 0.0.0.0 000.000.000.254 0.0.0.0 UG 0 0 0 eth0 In these examples (true IP addresses are replaced by fake ones, guess why :)), 000.000.000.000 is my main server's IP address (dom0), 000.000.000.254 is the default gateway OVH recommends, AAA.AAA.AAA.AAA is the first IP Failover and BBB.BBB.BBB.BBB is the second one. I need both AAA.AAA.AAA.AAA and BBB.BBB.BBB.BBB to be publicly reachable from Internet and point to my domU, and to be able to access Internet from inside the virtual machine (domU). I am using eth0 and eth0:0 because due to OVH support, I have to assign both IPs to the same MAC address and then create a virtual eth0:0 interface for the second IP. Any suggestion? What am I doing wrong? How can I stop OVH complaining about ARP flood? Many thanks in advance, DS

  Read the article

• Debian, 2 NICs load-balancing or agregating with one same gateway

  - by pouney

  Hi, I have one server, with double NICs connected to one switch with the same gateway. Behind the switch we have internet. |Debian| - eth0 - switch - internet - eth1 - same I don't understand how to load-balancing between eth0 and eth1. The inbound/outbound traffic always use eth1. This is the config: # The primary network interface allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.248.82 netmask 255.255.255.240 network 192.168.248.80 broadcast 192.168.248.95 gateway 192.168.248.81 allow-hotplug eth1 auto eth1 iface eth1 inet static address 192.168.248.83 netmask 255.255.255.240 network 192.168.248.80 broadcast 192.168.248.95 gateway 192.168.248.81 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.248.80 0.0.0.0 255.255.255.240 U 0 0 0 eth1 192.168.248.80 0.0.0.0 255.255.255.240 U 0 0 0 eth0 0.0.0.0 192.168.248.81 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.248.81 0.0.0.0 UG 0 0 0 eth0 Ips aren't real, it's just for the example. Anybody have an idea on correct routing to use eth0 on 192.168.248.82 and eth1 on 192.168.248.83 ? I have many example for multiple gateway but here it's the same. Thanks all. Regards

  Read the article

• Debian 6: setting up FTP just for website editing

  - by David Oliver

  I have a VPS using Debian 6.0. Currently, SSH is set to not accept password logins, and only key-based ones. A person who needs to work on one particular website (a vhost) wishes to use FTP. He doesn't need/want SSH. How can I set up FTP access for him, enabling him to have write permissions for all files in the relevant directory, and only the relevant directory? The directory is /srv/www/domainname.com/public_html Currently, all directories and files in that directory belong to www-data:www-data and are 644/755. I've installed vsftpd and have been reading some guides, but they all seem to deal with allowing multiple users to have their own user-named directories which isn't what I'm after. I can't seem to work out how to simply define one FTP user with a password that has access to one directory of my choosing. This is my first experience of setting up an FTP server. Thanks. Edit: have also found this - maybe I should be using ProFTPd, or can vsftpd also do what I want?

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . Thanks.. Ian

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

  Read the article

• "getpt failed: No such file or directory" when opening a terminal through VNC

  - by Michael

  I am running Debian Wheezy on my server, and have just installed a VNC server and Xfce. I have come across a problem: whenever I open a terminal emulator through VNC, I get an error box with this message: Failed to execute child. getpt failed: No such file or directory. This happens with every terminal I try to run. I can still run commands through SSH, however. It's just the terminal that won't open. Does anyone have any suggestions? /etc/fstab: proc /proc proc defaults 0 0 none /dev/pts devpts rw 0 0

  Read the article

• Must partprobe before using drive?

  - by Jeff Welling

  This is a followup question to Cannot mount /dev/sdc1 on Debian 5.0, special device /dev/sdc1 doesn't exist Basically, I have 6 SATA hard drives in a machine and I'm trying to create a RAID6 array with them. When I try to run the mdadm command to create (with the verbose option) a raid array, I see messages like "mdadm: super1.x cannot open /dev/sdf1: No such device or address" which are resolved by doing partprobe /dev/sdf and then re-running the mdadm command. The problem is that I have to run partprobe after each reboot, and from experience I don't think this is normal behaviour -- on no other linux machine do I have to partprobe the device before I can use it. Something must be going wrong, but how do I troubleshoot this to find out what? Could this be caused by a hardware problem? Edit: Additional note - before I seemed to only have this problem with one drive, but now I'm having it with 3 drives.

  Read the article

• FastCGI Error Access to the script denied

  - by ArtWorkAD

  I have a Debian Squeeze server running nginx + php-fpm + fastcgi. I have a typo3 installation on this server which runs well. No I installed OTRS and I get an error that I do not understand: 2012/06/25 15:35:38 [error] 16510#0: *34 FastCGI sent in stderr: "Access to the script '/opt/otrs/bin/fcgi-bin/index.pl' has been denied (see security.limit_extensions)" while reading response header from upstream, client: ..., server: support.....com, request: "GET /otrs/index.pl HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "support.....com", referrer: "http://support.....com/" Why do I get this error? The otrs directory is writable for the webserver, so this is not the problem. Any ideas?

  Read the article

• Difference between RPM (yum) and apt-get

  - by Josh K

  Functional difference between the two? Packages different style or what? I'm dipping my toe in the server pool and playing with an Ubuntu install right now, which is apt-get. I'm also considering FreeBSD and Debian if I do decide to start running my own VPS. So far things have been very easy, sudo apt-get install apache2 and the like with no issues at all. I'd like to know if there is a different learning curve to yum or variants.

  Read the article

• Slab uses 88Gb of 128Gb available. What could cause this?

  - by Joris Meys

  We run a debian 2.6.26-2-amd64 x86_64 GNU/Linux on a server with 128 Gb. Recently it our available memory became rather low. Looking at the /proc/meminfo showed that the Slab was using 88Gb, which is counted in the used memory off course. Is this a problem? I suspect that memory will be freed when necessary, but I don't know if that could have unwanted side effects. Why would Slab need that much memory? Is there a clear cause for that? can we avoid this to happen in the future? How can we free this memory? thank you in advance > cat /proc/meminfo MemTotal: 132304500 kB MemFree: 26669388 kB Buffers: 237504 kB Cached: 11881136 kB SwapCached: 48 kB Active: 5244640 kB Inactive: 11714308 kB SwapTotal: 5751228 kB SwapFree: 5750436 kB Dirty: 24 kB Writeback: 0 kB AnonPages: 4840256 kB Mapped: 163968 kB Slab: 88314840 kB SReclaimable: 88275644 kB SUnreclaim: 39196 kB PageTables: 80852 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 71903476 kB Committed_AS: 6818332 kB VmallocTotal: 34359738367 kB VmallocUsed: 505724 kB VmallocChunk: 34359231963 kB

  Read the article

• Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

  - by Wouter

  I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• Connection problem between redmine and svn

  - by WombaT

  I have server controlled by Debian 6.0. I installed and configured redmine some time ago, and now configured svn server. Now i'm trying to configure redmine to be able to view svn repository. URL is: https://192.168.11.78/svn/bee Connection is not working, log show this error: Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> Google says that its common error, and its possible to fix it by permamently accept of server certificate so i did it and nothing. Still dont work. Later, i added [global] store-plaintext-passwords = no in file .subversion/servers I did this (and cert accept) for both root and www-data users. Nothing helped, still got error in redmine The entry or revision was not found in the repository. What else i can do with it?

  Read the article

• I just got a linode VPS a week ago and I've been flagged for SSH scanning

  - by meder

  I got a 32-bit Debian VPS from http://linode.com and I really haven't done any sort of advanced configuration for securing it ( port 22; password enabled ). It seems somehow there is ssh scanning going on from my IP, I'm being flagged as this is against the TOS. I've been SSHing only from my home Comcast ISP which I run Linux on. Is this a common thing when getting a new vps? Are there any standard security configuration tips? I'm quite confused as to how my machine has been accused of this ssh scanning.

  Read the article

• How to download source, modify source, recompile and build .deb package?

  - by burnersk

  I have to customize my Apache2 suExec module to ensure some special environment variables getting passed through suExec. How to download the source code form Debian package apache2-suexec, modify suexec.c - safe_env_lst, recompile and build a .deb package again to rollout on the production systems? I tried apt-get source apache2-suexec but didn't found the suexec.c within the occurred apache2-* folder. The altered source code should be like this: static const char *const safe_env_lst[] = { /* variable name starts with */ "HTTP_", "SSL_", /* NEW: Perl debugging variables */ "PERL5OPT=", "PERL5LIB=", "PERLDB_OPTS=", "DBGP_IDEKEY=", /* NEW: FCGI variables */ "FCGI=", "FCGI_CONNECTION=", "FCGI_RUNTIME=", "FCGI_STARTTIME=", draft based on: http://static.askapache.com/httpd/support/suexec.c

  Read the article

• DOMPDF generation error

  - by VDVLeon

  Hello, I have a big problem at my work. We had to make a page who displays a exercise for the users. But that page need also to be available as pdf. To do this we used DOMPDF. This worked perfectly on your development server but when we moved it to the production server dompdf generates pdf with errors. When i open the pdf i get the error from Adobe Reader: 110. The first server (development) was Debian. The production server runs CentOS 5. DOMPDF used PDFLib or CPDF, but both generate the same error. Does anybody know what kind of differents on the server i need to be aware of ?

  Read the article

• New XEN Server, Intel i7, Errors were encountered while processing: xen-linux-system-amd64

  - by Sheldon

  I have just got a new machine to run XEN VM's on, it has an Intel i7 processor: - Intel Haswell Core i7-4790 3.6GHz 8MB LGA1150 I have setup the host with the current 6.2.0 I have set up a new Debian 7 64bit VM and any package I try and run fails with the following errors: Errors were encountered while processing: xen-utils-common xen-utils-4.1 xen-system-amd64 xen-linux-system-3.2.0-4-amd64 xen-linux-system-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Excuse my noob-ness but should it even be running an AMD package ? Any ideas on how to fix this ? Thanks

  Read the article

• What response should be made to a continued web-app crack attempt?

  - by Tchalvak

  I've issues with a continuous, concerted cracking attempt on a website (coded in php). The main problem is sql-injection attempts, running on a Debian server. A secondary effect of the problem is being spidered or repeatedly spammed with urls that, though a security hole has been closed, are still obviously related attempts to crack the site, and continue to add load to the site, and thus should be blocked. So what measures can I take to: A: Block known intruders/known attack machines (notably making themselves anonymous via botnet or relaying servers) to prevent their repeated, continuous, timed access from affecting the load of the site, and B: report & respond to the attack (I'm aware that the reporting to law enforcement is almost certainly futile, as may be reporting to the ip/machine where the attacks are originating, but other responses to take would be welcome).

  Read the article

• SSH keys fail for one user

  - by Eli

  I just set up a new Debian server. I disabled root SSH and password auth, so you've gotta use a key file. For my primary user, everything works exactly as expected. I used ssh-keygen -t dsa and got myself a public and private key. Put one in authorized keys, put the other in a pem file locally. I wanted to create a user that I can deploy things with, so I did basically the same process. I addusered it, made a .ssh folder, ran ssh-keygen -t dsa (I also tried RSA), put the keys in their appropriate locations. No luck. I'm getting a Permission denied (publickey) error. When I use the exact same keys as the account that works, same error. When I enable password authentication, I can log in via SSH with the password. How do I debug this?

  Read the article

• would unexpected power cuts harm the Linux OS?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• how to restrict access to all .txt file in apache except robots.txt?

  - by user3162764

  I am configuring apache2 on debian and would like to allow only robots.txt to be accessed for searching engines, while other .txt files are restricted, I tried to add the followings to .htaccess but no luck: <Files robots.txt> Order Allow,Deny Allow from All </Files> <Files *.txt> Order Deny,Allow Deny from All </Files> Can anyone help or give me some hints? I am new comer to apache, thanks a lot.

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >