Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 37/94 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • what firefall linux distro applicance could track internet usage per device in my home?

    - by GregH
    Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

    Read the article

  • nginx redirect to a subdomain even without trailing slashes

    - by Oliver A.
    Hi, I just installed and partially configured nginx on a dedicated server of mine. But I've got some trouble understanding the regexp. I would like to make nginx redirect www.mydomain.com/forum/ AND www.mydomain.com/forum (note the missing trailing slash; case-insensitive; same applies for "forums" instead of "forum") to forum.mydomain.com/. This is what I came up with: location ~* ^/(forum|forums) { rewrite ^/(.*)/(.*)$ http://forum.mydomain.com/$2? permanent; } ... but for some reason it works with trailing slashes only. :-/ Please help me! Thanks in advance!

    Read the article

  • Good/Better config for MySQL on an EC2 Large Instance

    - by Tim Reynolds
    I have an EC2 Large instance dedicated to MySQL. It will be serving a Joomla/Magento combo so it has a blend of InnoDB and MyISAM tables. I have only worked with MyISAM in the past and am therefore unfamiliar with the settings InnoDB uses. Experiments so far have been less than fruitful, as I keep causing the InnoDB engine to be disabled. My instance is running Ubuntu 10.04 64 bit server edition and has ~7.5G of ram. MySQL is currently using ~0.6% of that, with somewhat poor performance. I would like to configure it to use as much of the system RAM as is reasonable. Testing some settings I learned that the InnoDB logs can't collectively be larger than 4G. Would anyone be able to provide some base InnoDB and MyISAM settings to get my started. Thank you Tim

    Read the article

  • Hardware Acceleration on Windows Server 2008

    - by user1184598
    Does Windows Server 2008 have hardware acceleration? I tried to use WPF to make over 20,000 drawings. It only cause around 40% CPU in windows 7. However, I run the same program on Windows Server 2008 with the same hardware configuration except that it has a dedicated graphical display card (GT 9500) while Windows 7 has only an onboard display card, it cause over 80% CPU. So, does Windows Server 2008 have hardware acceleration? Or could I make it? And how do I change the hardware acceleration setting? Thanks.

    Read the article

  • Doubts about Cloud Infrastructure

    - by Pravin
    Maybe a little more of the same questions that others have asked but wanted to clarify my doubt, for some years run my hosting company (reseller of esds) and I've done well so far, but I am determined to bring quality and server technology to offer another level. So far I have understood that there is a difference between cloud and cluster servers because the cluster function as load balancers that distribute in different servers roles and use the servers less overloaded in the cloud is the union of multiple servers and then the same is vitualized unlike the cluster that is allowed to use the resources of the CPU and RAM servers in the virtualized environment. My approach is to use 3 dedicated servers to create a cloud server, My doubts: Does this type of cloud servers are only reserved for big companies? (Either because the union of the servers is done by hardware or software with high price) What characteristics should these servers meet? Possibly through software which should be used? Available? Thanks for your time, Cheers!

    Read the article

  • Unable to access virtaul IP after configuring NLB in windows 2008

    - by krish
    I have Two webseervers(WS1, WS2). I have added NLB component on both the machines. In WS1, i have added a cluster with IP as (eg:xx.yy.zz.100) and added WS1, WS2 to the same cluster. Now i have deployed application in WS1& WS2 and tried accessing the cluster IP address from WS1 and WS2. App opened. Now i have test machine which is in the same domain of WS1 and WS2. I tried accessing the application with clustered IP in the test machine, it did not work.However it is working when accessed with the dedicated IP of WS1 and WS2. But for making NLB i have to access the app with clusted IP. Help asap would be appriciated.

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    Hi, I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • Best Practice: iDRAC & NIC Selection

    - by Josh Brower
    I am setting up a new Dell server with iDRAC 6 Express. My options for the NIC are: 1) Shared 2) Shared with failover to LOM2 3) Shared with failover to all LOMs The server has 2x dual-nic PCI-E cards (total of 4 nics) My questions are thusly: -What is best practice for setting this up? Is there any reason why I would not want option 3? -If the NIC is being used for both iDRAC and the OS, (there is no dedicated iDRAC nic), does this ever cause any kinds of issues for either iDRAC or the OS? Thanks- -Josh

    Read the article

  • Defragment an Exchange Volume

    - by IceMage
    The Scenario: I use a dedicated volume (RAID volume) to store all of my data for my Exchange 2007 server. Today, out of curiosity, I decided to check up on how fragmented the files on this data volume were. To my surprise, the answer is extremely. So, a three part question: First and Foremost, SHOULD I defragment this volume (after a full backup of course)? Be specific as to why not if I should not, or reasons I absolutely should if I should. Second, about how much time should I allow for during this maintenance period per gigabyte. The drives are all 7200 RPM SATA drives on a Hardware RAID 5 controller (Perc 5i/6i, can't remember), the files are extremely fragmented. (Over 5000 file fragments per gigabyte). Third, is there something wrong here? It seems to me like the drive shouldn't be this fragmented. Could something be configured incorrectly that could be causing this to happen?

    Read the article

  • Apache httpd.conf handle multiple domains to run the same application

    - by John Stewart
    So what we are looking for is the ability to do the following: We have an application that can load certain settings based on the domain that it is being accessed from. So if you come from xyz.com we show a different logo and if you come from abc.com we show a different logo. The code is the same, running from same server just detects the domain on the run Now we want to get a dedicated server (any suggestions?) that will enable us to point all the doamins that we want to this server (we change the DNS for the domains to that of our server) and then when the user goes to a certain domain they run the same application. Now as far as I can understand we will need to create a "VirtualHost" in apache to handle this. Can we create a wildcard virtualhost that catches all the domains? I am not an expert with Apache at all. So please forgive if this comes out to be a silly question. Any detailed help would be great. Thanks

    Read the article

  • Can I use a Mac Mini as a web server and database server? What are the pros and cons?

    - by Christopher Altman
    We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

    Read the article

  • What is a good and safe way of sharing certificates?

    - by Kaustubh P
    I have a few certificates, that are used as authentication, to ssh into my servers on the Amazon cloud. I rotate those certificates weekly, manually. My question is, I need to share the certificates with some colleagues, a few on the LAN, and a few in another part of the country. What is the best practice to share the certificate? My initial thoughts were Dropbox and email. We dont host dedicated email servers with encryption and all, and dont have a VPN. Thanks.

    Read the article

  • Proxy Appliance

    - by Kumar
    I'm looking for a way to set-up a web proxy at home. Hopefully there's a solution I can use to do this. Alternatively, do you have any ideas for setting up one at home using a proxy with an auto updating list? UPDATE - AutoUpdating list so the new sites are categorized and downloaded and the filtering is done by category instead of per site e.g. peerblock works this way Appliance as in a small dedicated hardware or device to perform this task, like WD TV live or Acer Aspire Revo with the media center edition I'd be ok with setting up Squid / Linux / SquidGuard even if i'm not familiar with *nix but ideally a small form factor pc with dual nic's would be ideal so it can be out of sight for the most part !

    Read the article

  • Virtual server hardware to simulate 3-4 node web farm

    - by frankadelic
    I would like to get a dedicated server to run VMWare, VirtualBox, or similar. On this box, I would like to host 3-4 virtual instances of Linux, to act as nodes in a web farm. Performance is not that important, this would only be for testing and experimenting. I need something sub $1000 (including tax/shipping). Can someone recommend a pre-built server that would do the trick? I am pretty ignorant of hardware so building one is not going to work for me. Also, would I need multiple network cards to simulate a web farm or can the virtualization software handle that for me. Thanks

    Read the article

  • IIS7 defaulting to default.php instead of default.aspx

    - by emzero
    Hi guys. My client has just got a new dedicated server running Win2008 (we had 2003 before), II7, etc. I started setting a little ASP.NET 2.0 web application we have. Running on its own AppPool 2.0. The problem is that when I browse the site root (locally or remotely), I get 404 because the url now points to http://domain/default.php, when it should be default.aspx. Yes, I've checked the Defaults Documents settins for the website and I deleted everything but default.aspx (default.php was not even listed). To finish, I'll say that if I navigate to http://domain/default.aspx, the site works perfectly and I can follow links without problem. Any idea why is this happening? Or at least where I should start looking? Thanks!

    Read the article

  • Can I use a wireless-N laptop as an NAS for seamless and fast data transfer and access?

    - by techaddict
    I have a nice spare laptop (Dell 15R, one year old) that I was wondering if I could use as an NAS. The laptop has an E-Sata port, and I was wondering if I could set it up and plug in a few hard drives permanently (meaning I won't be unplugging it) to the eSata port and use the laptop as a wireless NAS to seamlessly and wirelessly store and access my files. To see more about what I'm looking for in the NAS to see if it's possible to use my other laptop for this purpose, see my other question: Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds? Alternatively, would it be better to sell the laptop and buy a dedicated NAS?

    Read the article

  • Is it possible to rent an IP address to mask the server real IP address?

    - by net-girl
    A customer would like to lease an IP address and point it to a dedicated web server with the intention of "masking" the server's IP address so it would be difficult to tell where the site is hosted. I found a company that leases IP addresses here: http://www.webhostingtalk.com/showthread.php?t=1191688 Is this even possible? Can they rent an IP address from a 3rd party in order to hide the server's IP address? Update: My client will be hosting a government leaks site and is trying to become Raid-Proof similar to what the pirate bay did: http://torrentfreak.com/pirate-bay-moves-to-the-cloud-becomes-raid-proof-121017/ Only that I'm worried about using a reverse proxy because of the latency it could cause having the app servers hosted in one data center and the load balancer/reverse proxy in other and also having to pay twice for bandwidth.

    Read the article

  • Qmail does not forward mail to a specific domain

    - by jahufar
    Hi I have a dedicated hosting account with GoDaddy.com. I've pointed my domain's email to work with Google apps. The server has qmail running and it forwards email to all domains just fine except for MY domain (mydomain.com) - it says 550 User xxx not found in mydomain.com I believe it thinks I've hosted email on the server itself (not gmail) and it's trying to validate if [email protected] exists on my server (which is not the case since it's all handled by google apps). How do I make it forward mail to all domains? Thank you :) EDIT: I would only need it forwarding emails if the connection originates from 127.0.0.1 - which I believe is the default way it's configured. So to clarify: I just need a purely forwarded configuration so my PHP scripts have the ability to send email.

    Read the article

  • VMware networking - PortChannel or not?

    - by dunxd
    My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

    Read the article

  • Mono on Linux: Apache or Nginx

    - by Furism
    Hi, I'm developing an ASP.NET application that will be run under Linux/Mono for various reasons (mostly to stay away from IIS, quite frankly). Of course the first web server I had in mind was Apache. But Apache, for all its advantages, adds a lot of overhead. Also, the application I'm building needs to be highly scalable and performance is one of the main concern. Apache has, obviously, a very good reputation and its record speaks for itself, but I don't need things like Reverse Proxy or Load Balancing because dedicated network devices would be used for that. So those modules from Apache will never be used. So basically my question is: since Nginx seems to fit exactly needs, is there any caveat I should be aware of? For instance, is Nginx renowned to be particularity safe? When security flaws are detected, how fast are they patched? Any insight on the pros and cons of using either of those servers in conjunction with Mono is welcome.

    Read the article

  • Upgrade PHP to 5.3 in Ubuntu Server 8.04 with Plesk 9.5

    - by alcuadrado
    I have a dedicated server with Ubuntu 8.04, and really need to upgrade php to 5.3 version in order to deploy a new version of the system. This version of php is the default one in ubuntu 10.04, so I considered upgrading the OS, but after trying that, I lost my plesk installation, which annoyed my client. I tried adding the dotdeb.org repositories, but don't know why, after running an apt-get upgrade, I get this error: # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: libapache2-mod-php5 php5 php5-cgi php5-cli php5-common php5-curl php5-gd php5-imap php5-mysql php5-sqlite php5-xsl 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded. Any idea why is this happenning? Or do you know any alternative method (except compiling my own binaries) to upgrade php or update ubuntu without loosing plesk? Thanks!

    Read the article

  • Run Logstalgia on Remote Global Apache Log On a WHM System

    - by macinjosh
    I work for a small web development shop. We have a dedicated Linux server running WHM. For fun we want to run Logstalgia on a machine in our office. We'd really like it to display information about all the traffic on our server. Logstalgia use Apache's access logs to generate its visuals, the problem I have is that by default WHM does not have an access log for all sites combined. How can I safely configure our server to output a combined/global Apache access log in a place accessible by a non-root SSH user? I am also concerned that this file could get quite large so I think I'd also need to know how to have it automatically shed old information. To make things more interesting I'm a programmer not a sys admin so not everything is immediately obvious to me.

    Read the article

  • apache2 and php slow first load on Ubuntu VPS - something like mysqltuner but for apache?

    - by talkingnews
    Ubuntu 10.10 64 bit VPS, 512Mb dedicated RAM. Mysql tuned so that sqltuner is completely happy. Used RAM never above 350Mb out of the 493 available. Load never exceeds 1.04 or so. httpd.conf tuned as per all the guides for vps of that memory - amount of preforks, spares etc. But for the FIRST load a site after having not visited for a while, it's taking ages. First load: Parse Time: 3.576 - Number of Queries: 50 - Query Time: 0.019723195953369 Reload Parse Time: 0.096 - Number of Queries: 39 - Query Time: 0.0066126374511719 Subsequent reloads will be at this speed. htop shows two items as soon as I load that page for the first time: php-cgi /usr/sbin/apache2 -k start I'm using suPHP but I've tried fast-cgi and cgi. Stuck now, a weekend of tweaking has brought me nothing. Advice appreciated.

    Read the article

  • What would be the total expenses of running an in-home web server?

    - by techaddict
    I have several hosting accounts with companies, and plan to keep them. However, I would like to try my hand at creating my own home web-server, both for fun and for the learning experience. I would like to know the expenses involved, including: electricity costs (greater than light bulb?) internet costs (will I have to upgrade my internet? Or is 3-5Mbps upload speed fine for a web server with medium amount of traffic? Would I have to get a separate internet connection?) other unknown expenses Consider that I will configure the web server myself, so that is not an expense. Also consider that I already have a computer (year-old Dell laptop, 15R) to use to be dedicated as the web server.

    Read the article

  • IIS 7.5 doesn't load static html pages

    - by Kizz
    There is an IIS 7.5 freshly installed on a dedicated server. ASP.NET 4.0 Web app copied to its folder, new website is created on its own IP on post 80, IIS_IUSR and IUSR accounts have read/execute rights on site's folder, the site is assigned to its own Integrated app pool with 4.0 .NET (I tried Classic pool with the same results). The problem: when I try to access this web site, browser only loads content generated by .NET resources such as aspx pages, .axd files, etc. Static images, static js, css and html files are in the page source but IIS doesn't serve them. Dev tools in all browsers complain that all those static resources have been sent by the server with wrong content type (plain text instead of image, styles, etc). What do I do wrong?

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >