Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 43/94 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

  - by TCB13

  My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

  Read the article

• Waht are the best proxy servers for Mikrotik router?

  - by niren

  I want to setup proxy server for my Mikrotik router. There is inbuilt web-proxy for Mikrotik router but I can extend this upto transparent proxy(kind of proxy server) only. We need High anonymity proxy so that we can hide our LAN static IPs(we don't have private IP) from outside Intruder/hackers. And also I know I can setup NAT rule to hide our IP(only private IP not public/static IP) as per this link, but I cann't hide static/public IP. Essentially I want to hide our Public/Static IP (there is static/public IP for all systems in our company) from outside Internet. To achieve this I guess I need other software apart from Mikrotik router gateway setup. can anyone suggest me Is there any other software to achieve my requirement? I know about squid proxy but am not sure whether It can hide our static/public IP. Note: we have assigned public/Static IP to all systems of our company since we have rights to access our company's system from anywhere by dedicated laptop(given by our company with more security) through VPN connection.

  Read the article

• Access 2 sites on same machine behind a router

  - by Luc

  Hello, I have several machines on my lan. On of them is running 2 web sites, first_web_site and second_web_site (each one in a dedicated NameVirtualHost). Another machine is running another site third_web_site. I would like to be able to access each one, within internet, with the url: first_web_site.domain.tld second_web_site.domain.tld third_web_site.domain.tld knowing that 2 sites are on the same machine. Can Apache help me to do this ? I have a machine that will have a apache server to be used for proxy purposes. I was talk to set up virtualhost on this one and use proxy server but I do not know how to do this. Could you please give me hints ? Thanks a lot, Luc

  Read the article

• I need some MySQL lookup table advice

  - by Gary Beam

  I have a MySQL database with about 200 tables. 50 of these are small 2-field 'id-data' lookup tables. Several of these DB's are hosted on a shared server. I have been informed that I need to reduce the total number of tables in the shared hosting environment because of performance issues relating to too many tables. My question is: Could/Should the 50 2-Field lookup tables be combined into a single 3-field table with 'id-field_name-data' Fields? Even if this can be done, I will have a lot of work to do on the PHP user application. My other choice is moving the DB's to a dedicated server at much higher hosting cost. I don't believe my 200 table DB's are actually causing any performance issues on this shared hosting server, at least not from the user application standpoint. There are never more than 10 of these tables joined in any single query; although I have seen some very-slow queries generated by phpmyadmin on these DB's.

  Read the article

• Linux servers vs Windows IIS sense of usage "free" solutions

  - by Rob

  I wonder what is the sense of using "free" open source solutions for serious webstie applications? Crawled and read many testing of servers performance and there is one conclusion: IIS seems to be the best choice for high load applicatiom. I mean cost effective. Especially this concers to Nginx PLUS and LiteSpeed Users where subscriptions paid for e.g. LoadBalacer and extra support cost a lot in fact. I'm asking then where it's "free" then or "cheap" in this case? Assuming even little higher cost of dedicated servers with Windows still seems like Windows looks cheaper. At it's basic setup Windows 2012 with IIS offer much more than std LAMP, or other NGINX config.... Maybe am I missing sth ? I mean only general case for someone who did not already started his app. I know exactly that the cheapest solution is the one someone is skilled. Has anyone done already such real costs calculation for example scenarios?

  Read the article

• Do virtual machines perform better on the host HDD or USB drive?

  - by Jeremy Ricketts

  The question I'm asking is kind of general, and I'll give more specifics about my specific setup. Here's the main question though: Do virtual machines generally perform better on the host HDD or is it better to operate them from an external disk? My specific setup: A Macbook Pro with a nearly full internal SATA drive that spins at 7200. On this system I'm running large programs like Photoshop and some other RAM-intense applications. I've dedicated 2 of my 8 gigs of RAM to my VMware Fusion virtual machine, which runs Windows 7 and Visual Studio, sits on the same drive. When that thing boots up, my system really starts crawling. I have an external USB (specifics of that drive are here) which I'm thinking about moving the VM to. Obviously a USB drive is slower than my internal HDD, but maybe having two operating systems using the same disk is WORSE than putting one of them on a separate (albiet slower) disk. This a bad idea?

  Read the article

• Torrent: Webseed or seeding client on server?

  - by Eliasdx

  I want to share a file using bittorent which I also offer over http. The torrent should be seeded by a dedicated and a virtual server and by people who are downloading it to lower bandwidth costs. My question: Should I set up a bittorrent client (rtorrent) on the servers and let them seed the file or should I use webseeds? I also want to limit the bandwidth the server uses to seed which is possible using rTorrent. How many bittorrent clients support webseeds? I found it in µTorrent and never heard of it before.

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• httpd service keep restarting. after 15-20 mins

  - by niraj

  I have recently purchased Dedicated Server which has 16bg ram and 1TB Harddisk. It has Cpanel and for firewall CSF Installd. I am mainly going to install it for File hosting service. Now the day i moved my httpd service keep restarting every 15-20 mins. It becomes unresponsive after that so have to manually restart it. My httpd settings are Start Servers = 5 Minimum Spare Servers = 5 Maximum Spare Servers = 10 Server Limit = 20000 Max Clients = 10000 Max Requests Per Child = 10000 Keep-Alive = On Keep-Alive Timeout = 5 Max Keep-Alive Requests = Unlimited Timeout 300 TOP is top - 14:53:41 up 1 day, 23:39, 2 users, load average: 0.10, 0.14, 0.09 Tasks: 1563 total, 1 running, 1562 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.6%sy, 0.0%ni, 98.1%id, 0.2%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 16303780k total, 16142048k used, 161732k free, 135264k buffers Swap: 8224760k total, 868k used, 8223892k free, 14136616k cached Please help me in this its keep happning.

  Read the article

• Tuning OpenVZ Containers to work better with Java?

  - by Daniel

  I have a 8 GB RAM Server (Dedicated) and currently have KVM Virtual Machines running on there (successfully) however i'm considering moving to OpenVZ as KVM seems a bit overkill with a lot of overhead for what i use it for. In the past i have used OpenVZ Containers, hosted by myself and from other providers and Java doesn't seem to work well with them.. One example is that if i give a container 2 GB RAM ( No burst) (with or without vswap doesn't matter) a java instance can only be tuned to use at very most 1500 MB of that RAM (-Xmx, -Xms). Ideally, i wish to be able to create "Mini" containers with about 256MB, 512MB, 768 RAM and run some java instances in them. My question is: I'm trying to find an ideal way to tune a OpenVZ container configuration to work better with Java memory. Please, don't suggest anything related to Java settings, i'm looking for OpenVZ specific answers.. Though i welcome any suggestion if you feel it may help me. Much Appreciated, Daniel

  Read the article

• Recommended resource to understand Internet conventions IPs, CNAMES, *, MX etc

  - by Petras

  I am a programmer who has been creating websites for many years in shared hosting environments. To make the website live, I logged into where the domain was hosted and updated the name servers. Sometimes I didn’t want POP email so I changed an A record. I never really understood what this meant but it worked. Now we have a dedicated server and I have to fill out all this to make it live: Plus I was told I had to complete zones at my domain host: I would really like to know what all this means. What is a * record What is an @ How does the internet work regarding all these conventions? Is there a good approachable book on this topic?

  Read the article

• sp_releaseapplock timeout expired cause?

  - by Darian Miller

  I've been using a combination of sp_getapplock and sp_releaseapplock for some custom application locking purposes for years now with success and just the last few days I've started to get some timeout expired errors on a sp_releaseapplock which is a bit puzzling. When listing the current locks, there's less than a dozen of these active, and the rest of the dedicated server is way underutilized at the moment (less than 100 batches/sec with a mutli-processor, 32GB Ram, higher end machine.) Is there a specific resource to be monitored that may point me in the right direction for determing why such a lightweight operation is timing out? This is called within a stored proc with a timeout of 120 seconds which seems to be amazingly long for this operation to timeout on. SQL 2000 SP4 running on Windows 2003 Server. TSQL used (@pLockUniqueName is VarChar(255)) EXEC @pLockSuccess = sp_getapplock @pLockUniqueName, 'Exclusive', 'Session', 0 EXEC @pUnLockSuccess = sp_releaseapplock @pLockUniqueName, 'Session' Thanks, Darian

  Read the article

• how can i realize a video-wall on 3-9pc with vlc

  - by Luca

  hello! i have to create a videowall, from 3 to 9 monitor. every monitor as a pc. actually, i stream from a server 9 movies with different istances of VLC, but i could also play on every machine the relative video with a single player. there's no problem. the real problem is that i really dont know how to sync the videos on a LAN...unfortunately there is a NETSYNC module inside VLC wich is NOT working. here are some info about my setup: videowall from 3 to 9 monitor || from 3 to 9 pc, all with the same configuration || a gigabit router+switch for the "dedicated" LAN im really stuck in this situation, if anyone has an idea or just a completely different solution, please, share it with me! thanks a lot in advance! :)

  Read the article

• Is there a free tool/package that can monitor web traffic and display URLS accessed? [closed]

  - by Anthony

  I couldn't find a similar question but then maybe I am searching for the wrong terms. A few years ago I used a router like device, I'm pretty sure it was a SonicWall, that did this on a clients site. Basically all traffic would be routed through this device and it allowed the manager/administrator to inspect web usage of the workers, determine how often certain resources were accessed and block them if necessary (much like content filter). It showed reports based on domain name reached etc. Facebbok.com, Bebo.com and so on. It also displayed the usual IP traffic information etc. it was a UTM also. I have tried Endian firewall, with it's NTOP install, but I don't think that will show URLs browsed. Maybe I just haven't found it in NTOP yet? I need this to troubleshoot connection and traffic issue at my home, with about twenty devices/users so didn't want to buy a dedicated solution and have spare hardware to use a community product.

  Read the article

• How do I create a guest ftp user and give access to specific sub-folder with SSH?

  - by gourav

  I just got a virtual dedicated server at GoDaddy. I got the Simple Control Panel. There doesn't seem to be a way to create a guest ftp user through this control panel and I was told it must be created through SSH. I have a program called Putty which can log into the server via SSH. I'm familiar with logging in but does anyone know what the commands are to be used to create a guest ftp user and give them Read and Write access to a particular folder? Regards gourav

  Read the article

• Best Guest OS for running freeswitch under Proxmox

  - by Frank Waller

  We have a lot of asterisk Systems running on dedicated machines and would like to use freeswitch to replace a number of them. One of the advantages of freeswitch is supposed to be that it is doing much better in a virtualized environment than asterisk is. However I can find very little information about people using it in Proxmox containers. I would like to know if anyone has seen any ready to run proxmox images that include freeswitch so we can test a number of things without having to deeply go into creating our own. Or at least a clue to which system images/distro images we can use to quickly get it installed not having to deal with too many dependency or different Linux version issues. Just to be clear: It should be for a more or less current Proxmox and current freeswitch. I am not looking forward to use the KVM mode but would consider it, if it is otherwise ready to run out of the box. I would rather use a real OpenVZ based container. Thanks for anyone helping!

  Read the article

• How to get uncaught PHP errors from fcgi server

  - by jason

  My web hosting company recently replaced suPHP with fcgi on my dedicated server because I needed opcode functionality. Since then I see loads of 500 errors in apache error and php error log is empty. I have no way to figure out whats the root cause. One reason I found out was time out so my hosting company changed FcgidConnectTimeout and FcgidIOTimeout to a value of 200. I believe there are no more timeout errors in my php script. My question is how do I capture PHP error before 500 internal server error page display to user? I am using Centos 5.8 server, WHM 11.34.0 (build 9), PHP 5.3.18 and Apache/2.2.23 (Unix) mod_ssl/2.2.23 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_fcgid/2.3.6

  Read the article

• How to put 1000 lightweight server applications in the cloud

  - by Dan Bird

  The company I work for sells a commercial desktop/server app that runs on any non dedicated Windows PC or server and uses Tomcat for all interactions with the application. Customers are asking that we host their instance of the application so they don't have to run it locally on their own servers. The app is lightweight and an average server, in theory, could handle 25-50 instances before users would notice a slowdown. However only 1 instance can run per Windows instance (because the application writes to a common registry branch) so we'd need something like VMWare to create 25-50 Windows instances. We know we eventually need to reprogram to make it truly cloud-worthy but what would you recommend for a server farm or whatever for this? We don't have the setup to purchase our own servers so we must use a 3rd party. We have budgeted $500 - $1000 per year per customer for this service. Thanks in advance for your suggestions, experiences and guidance.

  Read the article

• What is normal SCSI error handling process (scsi_eh_3) CPU time usage?

  - by Kris Jordan

  Last week I got setup with a new dedicated server that is running 4x SCSI drives in RAID 10 on CentOS. The machine is pretty lightly loaded at the moment and has been running for 8 days. The process 'scsi_eh_3' has a CPU time of 13:09.67 in top. This is 3x the next closest CPU time of 4:03.93 for mysqld. Is it normal for the scsi error handling process to use this much CPU time? (Seems like it goes to 0.3% usage ever 5 seconds.) Could this be an indicator that one or more of the drives is having issues?

  Read the article

• Vacation scheduler/viewer

  - by Norfeldt

  I'm looking for a solution that allows multiple persons to put plan and notify their vacation by putting it in their electronic calendar and invite a dedicated "robot" email. On the other side I should be able to get a quick overview of the vacation for each person and do a print out that allows me to put it on a board. Example: John puts his winter vacation for week 7 into his calendar and invite [email protected]. Ben does the same thing for week 4 and 5 and invites [email protected]. Dilbert host the [email protected] and prints out and overview for the next 3 months. Each person's vacation is either stated by name or/and color on the print out. I would like to do the thing with standard business software like Outlook 2010 without installing too many softwares. But at the same time it should be easy and quick to make the print outs without too much fiddling Am I dreaming ?

  Read the article

• SQL 2008 managing 2 Instances on single Physical server

  - by Rajeev

  Hi, I need some calrification about managing SQL server 2008. The scenario is as follows: I have One Windows Physical server at Primary site, I want to have Two different applications database on it, so shall I create two Instances on same server or shall have diffenrent server for another database. First Database is for management purpose while second would be used for Reporting purpose. There is a second database at the secondary site, which will be in Passive mode and I intend to connect them through MSCS. Now, can I have both Instances on Single server and both will work fine? The management database will be used more. Please reply soon. Can both Instances have dedicated reources allocated to them?

  Read the article

• Firewall Deep Inspection Updates and Antivirus Subscription, worth it?

  - by msemack

  I realize that this is a subjective question, but I'm trying to get some experiences We have Juniper firewalls in our organization (SSG-320M, SSG-5, and some old NS-5GT). We have the option of a yearly subscription for: Deep Inspection Signature Updates Juniper-Kaspersky Antivirus I seem similar services available from other Firewall vendors. We have Symantec Endpoint Protection deployed to all workstations and servers, plus a dedicated appliance for e-mail spam/virus filtering. So, I'm not sure what these firewall-base services will bring to the table that I don't already have. I would appreciate some feedback from people using these firewall services (Juniper or otherwise). Are these services generally worth it? Do they really catch anything? Do they interfere with normal traffic (false positives)?

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• low speed web application, Server problem or Application

  - by Ashian

  Hi, I have a web application written by asp.net (c#) sql server 2005. we host it on 2 dedicated server ( IIS and SQL server ) From some month ago , in some days of week we have many reports about speed issue. we have some other application on this server using same database. when we have speed problem all aplication on these server have this problem, but applications on other server in same data center work correctly. ram and cpu usage are ok. how can I check that the problem related to internet connection or my application design? which parameters must be checked. Some other information In applications users can upload several files to server , each file up to 3 MB. we use a sql web admin application, on same server that has same problem, this is a standard application which work perfectly on other servers. Thanks

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >