Search Results

Search found 3266 results on 131 pages for 'dell dimension'.

Page 37/131 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • iSCSI SAN RAID 10 Performance -- Poor Read, Good Write

    - by Litzner
    I have a EqualLogic PS4000 SAN unit with the latest firmware, setup in RAID 10. I have 3 2TB Volumes on the SAN shared out via iSCSI on 2 eth ports on two different subnets. I have moved a test server over to this newly setup SAN, and my testing is showing me a problem. I am getting dismal read performance in everything except a test with 32 queue depth (see attach image) Write performance seems to be right about where it should be. I have tried MPIO on and off, on was slightly better but not much.

    Read the article

  • Can't reliably ping 6224 router from directly-attached system

    - by David Mackintosh
    OK, here's my situation. This is on the internet. The 6224 is the router in this picture and physically resides in Kanata. Both VLAN 1697 and 3994 are provided by an internet service provider. These VLANs are provided through a single 1Gb ethernet wire. The Kanata hosts are directly attached to the 6224; the other two sites are remote. VLAN 3994 is a single IP address space, so theoretically it shouldn't matter physically where the hosts on that subnet are. Here's the problem. I have a monitoring system which is connected further into the internet, so probes from the monitor would come in to this diagram on the 1697 VLAN. When I ping hosts at Albert or Bells Corners from the internet, there is 0 loss. The connection looks perfect. When I ping hosts at Kanata, I lose anywhere from 10 to 40% of the pings. The loss is not predictable, but: when I do lose them, I always lose at least 3, usually 4, rarely more, pings in a bunch. I have attached a monitor directly to the 6224 in Kanata on 3994.. When the monitor pings the 6224 routing interface, I see exactly the same loss pattern -- but NOT at the same time as the loss from the remote system. Ping time is around 1ms. When the monitor pings another system directly attached to the 6224, there is 0 loss. Ping time is about 0.1ms, one-tenth of the time to ping the router. Anyone know what is going on here?

    Read the article

  • What are the specific uses of these hardware? [closed]

    - by vincentbelkin
    So I'm trying to learn more about databases and information systems. However I need more explanation on the specific purpose of these hardware. I'm not sure if they are servers or what. HP AlphaServer ES47 Tower Tru64 Unix Intel-Based B, Proliant ML350GA Two Intel-Based A Proliant ML570T03 Intel-Based X236 Intel Quad Core Xeon Category B X3500 Poweredge 1400 SC Btw I'm just a college student who wants to know more about these hardware

    Read the article

  • Latitude D600 USB port problem

    - by Moab
    Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

    Read the article

  • Hibernate doesn't work in Windows 7 64bit

    - by hey
    Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

    Read the article

  • Repeated Squaring - Matrix Multiplication using NEWMAT

    - by Dinakar Kulkarni
    I'm trying to use the repeated squaring algorithm (using recursion) to perform matrix exponentiation. I've included header files from the NEWMAT library instead of using arrays. The original matrix has elements in the range (-5,5), all numbers being of type float. # include "C:\User\newmat10\newmat.h" # include "C:\User\newmat10\newmatio.h" # include "C:\User\newmat10\newmatap.h" # include <iostream> # include <time.h> # include <ctime> # include <cstdlib> # include <iomanip> using namespace std; Matrix repeated_squaring(Matrix A, int exponent, int n) //Recursive function { A(n,n); IdentityMatrix I(n); if (exponent == 0) //Matrix raised to zero returns an Identity Matrix return I; else { if ( exponent%2 == 1 ) // if exponent is odd return (A * repeated_squaring (A*A, (exponent-1)/2, n)); else //if exponent is even return (A * repeated_squaring( A*A, exponent/2, n)); } } Matrix direct_squaring(Matrix B, int k, int no) //Brute Force Multiplication { B(no,no); Matrix C = B; for (int i = 1; i <= k; i++) C = B*C; return C; } //----Creating a matrix with elements b/w (-5,5)---- float unifRandom() { int a = -5; int b = 5; float temp = (float)((b-a)*( rand()/RAND_MAX) + a); return temp; } Matrix initialize_mat(Matrix H, int ord) { H(ord,ord); for (int y = 1; y <= ord; y++) for(int z = 1; z<= ord; z++) H(y,z) = unifRandom(); return(H); } //--------------------------------------------------- void main() { int exponent, dimension; cout<<"Insert exponent:"<<endl; cin>>exponent; cout<< "Insert dimension:"<<endl; cin>>dimension; cout<<"The number of rows/columns in the square matrix is: "<<dimension<<endl; cout<<"The exponent is: "<<exponent<<endl; Matrix A(dimension,dimension),B(dimension,dimension); Matrix C(dimension,dimension),D(dimension,dimension); B= initialize_mat(A,dimension); cout<<"Initial Matrix: "<<endl; cout<<setw(5)<<setprecision(2)<<B<<endl; //----------------------------------------------------------------------------- cout<<"Repeated Squaring Result: "<<endl; clock_t time_before1 = clock(); C = repeated_squaring (B, exponent , dimension); cout<< setw(5) <<setprecision(2) <<C; clock_t time_after1 = clock(); float diff1 = ((float) time_after1 - (float) time_before1); cout << "It took " << diff1/CLOCKS_PER_SEC << " seconds to complete" << endl<<endl; //--------------------------------------------------------------------------------- cout<<"Direct Squaring Result:"<<endl; clock_t time_before2 = clock(); D = direct_squaring (B, exponent , dimension); cout<<setw(5)<<setprecision(2)<<D; clock_t time_after2 = clock(); float diff2 = ((float) time_after2 - (float) time_before2); cout << "It took " << diff2/CLOCKS_PER_SEC << " seconds to complete" << endl<<endl; } I face the following problems: The random number generator returns only "-5" as each element in the output. The Matrix multiplication yield different results with brute force multiplication and using the repeated squaring algorithm. I'm timing the execution time of my code to compare the times taken by brute force multiplication and by repeated squaring. Could someone please find out what's wrong with the recursion and with the matrix initialization? NOTE: While compiling this program, make sure you've imported the NEWMAT library. Thanks in advance!

    Read the article

  • Google Analytics - Profile filter with more than one dimension?

    - by Drewdavid
    I have identified some bot traffic in GA, but to filter it accurately I need to filter it by two dimensions, namely Browser and ISP To be clear, I don't want to apply both a filter to block the entire ISP and the entire Browser segments, but only the combination of the two To illustrate: Could someone explain how to do this? It's not apparent using the interface and I'm not able to find any documentation about it

    Read the article

  • unable to get into windows 7 or ubuntu after system file back on a dual boot system

    - by John Jiang
    I installed ubuntu on my dell xps 9000 which originally has a window 7 installed. So after I did system file back up as told by windows 7 and restarted my computer, I received the following message right after restarting in the black screen: roughly like this: ubuntu grub error, " " symbol cannot be found. I was wondering how I can get access into windows 7 and uninstall ubuntu all together. I actually had the same booting problem after system backup before and the solution was to install two extra ubuntus but I'd prefer not to do that. I'd highly appreciate any help!

    Read the article

  • HPCM 11.1.2.x - Outline Optimisation for Calculation Performance

    - by Jane Story
    When an HPCM application is first created, it is likely that you will want to carry out some optimisation on the HPCM application’s Essbase outline in order to improve calculation execution times. There are several things that you may wish to consider. Because at least one dense dimension for an application is required to deploy from HPCM to Essbase, “Measures” and “AllocationType”, as the only required dimensions in an HPCM application, are created dense by default. However, for optimisation reasons, you may wish to consider changing this default dense/sparse configuration. In general, calculation scripts in HPCM execute best when they are targeting destinations with one or more dense dimensions. Therefore, consider your largest target stage i.e. the stage with the most assignment destinations and choose that as a dense dimension. When optimising an outline in this way, it is not possible to have a dense dimension in every target stage and so testing with the dense/sparse settings in every stage is the key to finding the best configuration for each individual application. It is not possible to change the dense/sparse setting of individual cloned dimensions from EPMA. When a dimension that is to be repeated in multiple stages, and therefore cloned, is defined in EPMA, every instance of that dimension has the same storage setting. However, such manual changes may not be preserved in all cases. Please see below for full explanation. However, once the application has been deployed from EPMA to HPCM and from HPCM to Essbase, it is possible to make the dense/sparse changes to a cloned dimension directly in Essbase. This can be done by editing the properties of the outline in Essbase Administration Services (EAS) and manually changing the dense/sparse settings of individual dimensions. There are two methods of deployment from HPCM to Essbase from 11.1.2.1. There is a “replace” deploy method and an “update” deploy method: “Replace” will delete the Essbase application and replace it. If this method is chosen, then any changes made directly on the Essbase outline will be lost. If you use the update deploy method (with or without archiving and reloading data), then the Essbase outline, including any manual changes you have made (i.e. changes to dense/sparse settings of the cloned dimensions), will be preserved. Notes If you are using the calculation optimisation technique mentioned in a previous blog to calculate multiple POVs (https://blogs.oracle.com/pa/entry/hpcm_11_1_2_optimising) and you are calculating all members of that POV dimension (e.g. all months in the Period dimension) then you could consider making that dimension dense. Always review Block sizes after all changes! The maximum block size recommended in the Essbase Database Administrator’s Guide is 100k for 32 bit Essbase and 200k for 64 bit Essbase. However, calculations may perform better with a larger than recommended block size provided that sufficient memory is available on the Essbase server. Test different configurations to determine the most optimal solution for your HPCM application. Please note that this blog article covers HPCM outline optimisation only. Additional performance tuning can be achieved by methodically testing database settings i.e data cache, index cache and/or commit block settings. For more information on Essbase tuning best practices, please review these items in the Essbase Database Administrators Guide. For additional information on the commit block setting, please see the previous PA blog article https://blogs.oracle.com/pa/entry/essbase_11_1_2_commit

    Read the article

  • Connecting Dell XPS 17/HP Pavilion dv7 (nvidia GT 650M) to Apple LED Cinema Display for 2560x1440 resolution from notebook

    - by alphaTrader
    Is there any way to run higher than 1080p resolution from a Dell XPS 15/17 or HP Pavilion laptop? Specifically, I am planning to buy Dell XPS L721X or HP Pavilion dv7-7005tx with nvidia GeForce GT 650M and connect it to the Apple LED Cinema display via mini Displayport (I don't think Thunderbolt is supported on these notebooks). The idea is to get 1080p on the notebook and 2560x1440 on the main display. Only one of the montitors is active at any time. I asked Dell and they weren't of much help.

    Read the article

  • How to handle brightness trouble on dell inspiron i14R-2265?

    - by den-javamaniac
    Hi. Recently I've installed ubuntu 10.10 32-bit on my dell inspiron i14r-2265, but it looks like brightness control is not working. I can change it "programmatically" (FN + brightness key), though actual screen brightness shows no effect. I've tried this advice but it didn't work for me. I actually have no idea how it works (if hardware is not responsive to software, the way I see it), so can someone suggest a solution please?

    Read the article

  • regular expression to get the filename from urls

    - by robert
    if i have a textbox with severals urls rapidshare.com/files/379028801/Fringe.S02E19.HDTV.XviD-LOL.avi rapidshare.com/files/379182651/Fringe.S02E19.720p.HDTV.X264-DIMENSION.mkv rapidshare.com/files/379180004/Fringe.S02E19.720p.HDTV.X264-DIMENSION.part1.rar rapidshare.com/files/379180444/Fringe.S02E19.720p.HDTV.X264-DIMENSION.part2.rar rapidshare.com/files/379181251/Fringe.S02E19.720p.HDTV.X264-DIMENSION.part3.rar rapidshare.com/files/379181743/Fringe.S02E19.720p.HDTV.X264-DIMENSION.part4.rar i need a the files name and its urls textbox2.text = Fringe.S02E19.HDTV.XviD-LOL.avi from here rapidshare.com/files/379028801/Fringe.S02E19.HDTV.XviD-LOL.avi Fringe.S02E19.720p.HDTV.X264-DIMENSION.part1.rar from here rapidshare.com/files/379180004/Fringe.S02E19.720p.HDTV.X264-DIMENSION.part1.rar and so on Thanks :)

    Read the article

  • Does the DisplayPort on the Dell UltraSharp U2311H Monitor work with a MacBook Pro?

    - by GeneQ
    I'm thinking of getting the Dell UltraSharp U2311H monitor which apparently comes with a DisplayPort. (I used the word "apparently" because I find DisplayPort support a little bit too good to be true, coming from Dell. But great news nonetheless if it's really true) I plan to connect it to a Mac Book Pro (2010) via a mini DisplayPort to DisplayPort cable. Has anyone tried this setup? Does it work? Thanks.

    Read the article

  • what virtual machine should dell poweredg sc 1425 install?

    - by Nguyen Khanh Huy
    I'm intalling our local server and want to install a virtual machine but it seem vmware ESXi is not suit with our server Server: Dell SC 1424 CPU : 2 Xeon 3.2G (buss 800, cache L2 2M) Ram: 6G DDR ECC 266 Hard disk: 2 Hitachi Sata 1TB. Raid Dell Cerc 2s ( raid 0, 1) Nic: 2 Broadcom 1Gb/s I'm wondering if you're familiar with this area and have any idea about a VM software for our server. Just wanted to use server for some purposes ( web hosting, subversion and to experience some server OSs) Thank you for helping.

    Read the article

  • When upgrading from Vista to Windows 7 on a DELL laptop, how do I know which drivers to reinstall an

    - by msorens
    According to Dell's upgrade page for Vista to Windows 7, after using the upgrade assistant the final step is to install drivers. They refer to this page for the order of driver installation, listing 9 items. From there I go to the Dell Drivers and Downloads page, enter my system tag, and get a list of the downloads available for my specific box. That page, by the way, has a link to driver install instructions that lists 10 rather than 9 items. Going to Drivers Help in the side panel and clicking on "In what order should drivers be installed?" shows yet a third list, this one containing 13 items. Not surprisingly, the order of these 3 lists of drivers are not quite the same for the common items! Furthermore, of the 26 files Dell's site recommends for my machine, there are several not shown on any of the 3 lists! I can make determinations for some of these: 6 of them are "applications" so I know which of those I want and that they could probably be safely installed after all drivers. BIOS: I would think this should be unaffected by an OS upgrade so could be skipped. Two tools in the diagnostics category: could probably be done after all drivers. That leaves just a CD/DVD driver and a webcam driver unaccounted for. So my two related questions are these: How critical is the driver installation order and which one do I follow? (Keep in mind this is for an upgrade, not a fresh install.) Where in the order do I insert the CD/DVD and the webcam drivers (if needed) ? Dell's driver download page provides (in theory) the list of all downloads relevant to my specific machine, via the service tag. But do I actually need to reinstall all of them? some? none? How does one determine this? They do label each with Recommended or Optional, so do I need to reinstall all the recommended ones? (Part of the reason for my perplexed frown is that I wonder why I would need to reinstall a CD/DVD driver since I would already be using the drive to install the OS!)

    Read the article

  • Create user in Oracle 11g with same priviledges as in Oracle 10g XE

    - by Álvaro G. Vicario
    I'm a PHP developer (not a DBA) and I've been working with Oracle 10g XE for a while. I'm used to XE's simplified user management: Go to Administration/ Users/ Create user Assign user name and password Roles: leave the default ones (connect and resource) Privileges: click on "Enable all" to select the 11 possible ones Create This way I get a user that has full access to its data and no access to everything else. This is fine since I only need it to develop my app. When the app is to be deployed, the client's DBAs configure the environment. Now I have to create users in a full Oracle 11g server and I'm completely lost. I have a new concept (profiles) and there're like 20 roles and hundreds of privileges in various categories. What steps do I need to complete in Oracle Enterprise Manager in order to obtain a user with the same privileges I used to assign in XE? ==== UPDATE ==== I think I'd better provide a detailed explanation so I make myself clearer. This is how I create a user in 10g XE: Roles: [X] CONNECT [X] RESOURCE [ ] DBA Direct Asignment System Privileges: [ ] CREATE DATABASE LINK [ ] CREATE MATERIALIZED VIEW [ ] CREATE PROCEDURE [ ] CREATE PUBLIC SYNONYM [ ] CREATE ROLE [ ] CREATE SEQUENCE [ ] CREATE SYNONYM [ ] CREATE TABLE [ ] CREATE TRIGGER [ ] CREATE TYPE [ ] CREATE VIEW I click on Enable All and I'm done. This is what I'm asked when doing the same in 11g: Profile: (*) DEFAULT ( ) WKSYS_PROF ( ) MONITORING_PROFILE Roles: CONNECT: [ ] Admin option [X] Default value Edit List: AQ_ADMINISTRATOR_ROLE AQ_USER_ROLE AUTHENTICATEDUSER CSW_USR_ROLE CTXAPP CWM_USER DATAPUMP_EXP_FULL_DATABASE DATAPUMP_IMP_FULL_DATABASE DBA DELETE_CATALOG_ROLE EJBCLIENT EXECUTE_CATALOG_ROLE EXP_FULL_DATABASE GATHER_SYSTEM_STATISTICS GLOBAL_AQ_USER_ROLE HS_ADMIN_ROLE IMP_FULL_DATABASE JAVADEBUGPRIV JAVAIDPRIV JAVASYSPRIV JAVAUSERPRIV JAVA_ADMIN JAVA_DEPLOY JMXSERVER LOGSTDBY_ADMINISTRATOR MGMT_USER OEM_ADVISOR OEM_MONITOR OLAPI_TRACE_USER OLAP_DBA OLAP_USER OLAP_XS_ADMIN ORDADMIN OWB$CLIENT OWB_DESIGNCENTER_VIEW OWB_USER RECOVERY_CATALOG_OWNER RESOURCE SCHEDULER_ADMIN SELECT_CATALOG_ROLE SPATIAL_CSW_ADMIN SPATIAL_WFS_ADMIN WFS_USR_ROLE WKUSER WM_ADMIN_ROLE XDBADMIN XDB_SET_INVOKER XDB_WEBSERVICES XDB_WEBSERVICES_OVER_HTTP XDB_WEBSERVICES_WITH_PUBLIC System Privileges: <Empty> Edit List: ACCESS_ANY_WORKSPACE ADMINISTER ANY SQL TUNING SET ADMINISTER DATABASE TRIGGER ADMINISTER RESOURCE MANAGER ADMINISTER SQL MANAGEMENT OBJECT ADMINISTER SQL TUNING SET ADVISOR ALTER ANY ASSEMBLY ALTER ANY CLUSTER ALTER ANY CUBE ALTER ANY CUBE DIMENSION ALTER ANY DIMENSION ALTER ANY EDITION ALTER ANY EVALUATION CONTEXT ALTER ANY INDEX ALTER ANY INDEXTYPE ALTER ANY LIBRARY ALTER ANY MATERIALIZED VIEW ALTER ANY MINING MODEL ALTER ANY OPERATOR ALTER ANY OUTLINE ALTER ANY PROCEDURE ALTER ANY ROLE ALTER ANY RULE ALTER ANY RULE SET ALTER ANY SEQUENCE ALTER ANY SQL PROFILE ALTER ANY TABLE ALTER ANY TRIGGER ALTER ANY TYPE ALTER DATABASE ALTER PROFILE ALTER RESOURCE COST ALTER ROLLBACK SEGMENT ALTER SESSION ALTER SYSTEM ALTER TABLESPACE ALTER USER ANALYZE ANY ANALYZE ANY DICTIONARY AUDIT ANY AUDIT SYSTEM BACKUP ANY TABLE BECOME USER CHANGE NOTIFICATION COMMENT ANY MINING MODEL COMMENT ANY TABLE CREATE ANY ASSEMBLY CREATE ANY CLUSTER CREATE ANY CONTEXT CREATE ANY CUBE CREATE ANY CUBE BUILD PROCESS CREATE ANY CUBE DIMENSION CREATE ANY DIMENSION CREATE ANY DIRECTORY CREATE ANY EDITION CREATE ANY EVALUATION CONTEXT CREATE ANY INDEX CREATE ANY INDEXTYPE CREATE ANY JOB CREATE ANY LIBRARY CREATE ANY MATERIALIZED VIEW CREATE ANY MEASURE FOLDER CREATE ANY MINING MODEL CREATE ANY OPERATOR CREATE ANY OUTLINE CREATE ANY PROCEDURE CREATE ANY RULE CREATE ANY RULE SET CREATE ANY SEQUENCE CREATE ANY SQL PROFILE CREATE ANY SYNONYM CREATE ANY TABLE CREATE ANY TRIGGER CREATE ANY TYPE CREATE ANY VIEW CREATE ASSEMBLY CREATE CLUSTER CREATE CUBE CREATE CUBE BUILD PROCESS CREATE CUBE DIMENSION CREATE DATABASE LINK CREATE DIMENSION CREATE EVALUATION CONTEXT CREATE EXTERNAL JOB CREATE INDEXTYPE CREATE JOB CREATE LIBRARY CREATE MATERIALIZED VIEW CREATE MEASURE FOLDER CREATE MINING MODEL CREATE OPERATOR CREATE PROCEDURE CREATE PROFILE CREATE PUBLIC DATABASE LINK CREATE PUBLIC SYNONYM CREATE ROLE CREATE ROLLBACK SEGMENT CREATE RULE CREATE RULE SET CREATE SEQUENCE CREATE SESSION CREATE SYNONYM CREATE TABLE CREATE TABLESPACE CREATE TRIGGER CREATE TYPE CREATE USER CREATE VIEW CREATE_ANY_WORKSPACE DEBUG ANY PROCEDURE DEBUG CONNECT SESSION DELETE ANY CUBE DIMENSION DELETE ANY MEASURE FOLDER DELETE ANY TABLE DEQUEUE ANY QUEUE DROP ANY ASSEMBLY DROP ANY CLUSTER DROP ANY CONTEXT DROP ANY CUBE DROP ANY CUBE BUILD PROCESS DROP ANY CUBE DIMENSION DROP ANY DIMENSION DROP ANY DIRECTORY DROP ANY EDITION DROP ANY EVALUATION CONTEXT DROP ANY INDEX DROP ANY INDEXTYPE DROP ANY LIBRARY DROP ANY MATERIALIZED VIEW DROP ANY MEASURE FOLDER DROP ANY MINING MODEL DROP ANY OPERATOR DROP ANY OUTLINE DROP ANY PROCEDURE DROP ANY ROLE DROP ANY RULE DROP ANY RULE SET DROP ANY SEQUENCE DROP ANY SQL PROFILE DROP ANY SYNONYM DROP ANY TABLE DROP ANY TRIGGER DROP ANY TYPE DROP ANY VIEW DROP PROFILE DROP PUBLIC DATABASE LINK DROP PUBLIC SYNONYM DROP ROLLBACK SEGMENT DROP TABLESPACE DROP USER ENQUEUE ANY QUEUE EXECUTE ANY ASSEMBLY EXECUTE ANY CLASS EXECUTE ANY EVALUATION CONTEXT EXECUTE ANY INDEXTYPE EXECUTE ANY LIBRARY EXECUTE ANY OPERATOR EXECUTE ANY PROCEDURE EXECUTE ANY PROGRAM EXECUTE ANY RULE EXECUTE ANY RULE SET EXECUTE ANY TYPE EXECUTE ASSEMBLY EXPORT FULL DATABASE FLASHBACK ANY TABLE FLASHBACK ARCHIVE ADMINISTER FORCE ANY TRANSACTION FORCE TRANSACTION FREEZE_ANY_WORKSPACE GLOBAL QUERY REWRITE GRANT ANY OBJECT PRIVILEGE GRANT ANY PRIVILEGE GRANT ANY ROLE IMPORT FULL DATABASE INSERT ANY CUBE DIMENSION INSERT ANY MEASURE FOLDER INSERT ANY TABLE LOCK ANY TABLE MANAGE ANY FILE GROUP MANAGE ANY QUEUE MANAGE FILE GROUP MANAGE SCHEDULER MANAGE TABLESPACE MERGE ANY VIEW MERGE_ANY_WORKSPACE ON COMMIT REFRESH QUERY REWRITE READ ANY FILE GROUP REMOVE_ANY_WORKSPACE RESTRICTED SESSION RESUMABLE ROLLBACK_ANY_WORKSPACE SELECT ANY CUBE SELECT ANY CUBE DIMENSION SELECT ANY DICTIONARY SELECT ANY MINING MODEL SELECT ANY SEQUENCE SELECT ANY TABLE SELECT ANY TRANSACTION UNDER ANY TABLE UNDER ANY TYPE UNDER ANY VIEW UNLIMITED TABLESPACE UPDATE ANY CUBE UPDATE ANY CUBE BUILD PROCESS UPDATE ANY CUBE DIMENSION UPDATE ANY TABLE Object Privileges: <Empty> Add: Clase Java Clases de Trabajos Cola Columna de Tabla Columna de Vista Espacio de Trabajo Función Instantánea Origen Java Paquete Planificaciones Procedimiento Programas Secuencia Sinónimo Tabla Tipos Trabajos Vista Consumer Group Privileges: <Empty> Default Consumer Group: (*) None Edit List: AUTO_TASK_CONSUMER_GROUP BATCH_GROUP DEFAULT_CONSUMER_GROUP INTERACTIVE_GROUP LOW_GROUP ORA$AUTOTASK_HEALTH_GROUP ORA$AUTOTASK_MEDIUM_GROUP ORA$AUTOTASK_SPACE_GROUP ORA$AUTOTASK_SQL_GROUP ORA$AUTOTASK_STATS_GROUP ORA$AUTOTASK_URGENT_GROUP ORA$DIAGNOSTICS SYS_GROUP And, of course, I wonder what options I should pick.

    Read the article

  • How do I use with LTSP with a Dell FX170 thin client?

    - by v4169sgr
    Just got a reconditioned DELL Optiplex FX170 thin client delivered, without an image. On power-up, I see the message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER I am very sure all the wires etc are connected properly. I would like it to PXE boot and find my LTSP installation. I have an HP T5525 with the same connectivity that works fine. On F12 there's a BIOS boot order menu. The only options available though are LS120, the HDD, CD / DVD [via USB presumably], and various USB options. I do not see 'PXE' or any network card. And I don't know how to change the boot order :( Any help appreciated!

    Read the article

  • I Installed Ubuntu 12.04 on a dell Inspiron 1501 along side windows vista using the windows installer but it wont boot into Ubuntu

    - by Nicholas
    I Installed Ubuntu 12.04 on a dell Inspiron 1501 with an AMD 64 along side windows vista using the windows installer but it wont boot into Ubuntu. It shows that Ubuntu is on the system when my computer boots up but when I select it to load it goes into a black screen and displays some error messages and tells me that the is no operating system installed. this is the error that i get: Try (hdo, 0):FAT16:no WUBILDR try (hdo, 1)NTFS: error: "Prefix" is not set. symbol not found:'grub_file_get_device_name' Aborted. Broadcom UNDI PXE-2.1 V2-1.0 copyright (c) 2000-2006 Broadcom corporation copyright (c) 1997-2000 Intel corporation All rights reserved PXE-EC8:PXE structure was not found in UNDI driver code segment. PXE-M0F Broadcom PXE Rom Operating system not found How can I fix this? I have tryed re-installing it but i get the same error.

    Read the article

  • Getting the Dell XPS 16 Synaptics touchpad to work after hibernation in Ubuntu.

    - by Aron Rotteveel
    I am currently experimenting with using Ubuntu as a my main OS instead of Windows 7. So far, pretty much everything is working fine, except for an issue that I am having with my touchpad. I have a Dell XPS 16 (1640) with a Synaptics touchpad. It works out of the box, but it seems that it stops working after returning from hibernation mode. This problem has also been addressed in an earlier bug, but judging from this bugreport, it should be fixed by now. I am running the 2.6.35-23-generic-pae kernel. Any ideas?

    Read the article

  • I need help pleas help me xorg.conf missing Ubuntu 11.10 can't install driver for my Intel GM965 on my Dell Latitude d630

    - by ??????? ?????????
    I have hard time solving my problem. I have searched the net but nothing worked... I just installed the newest ver of ubuntu 11.10 on my laptop dell latitude d630. Everything works fine but it seems i dont have my video card drivers installed. I have some standart drivers. I try to check out my xorg.conf file but its missing i try to make one from root but it gives me critical error. Its like i dont have X11 installed can some1 please help me here are some of the things ive tryed... """ splash@MDFC:/$ Xorg :1 -configure Fatal server error: Cannot open log file "/var/log/Xorg.1.log" Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log """ splash@MDFC:/$ sudo cp /root/xorg.conf.new /etc/X11/xorg.conf cp: cannot stat `/root/xorg.conf.new': No such file or directory """" Any ideas help me please...

    Read the article

  • How to get wireless and wired network working again on my Dell Inspiron 1501?

    - by Angelo Daul
    My wireless doesn't work with Ubuntu 12.04.(it worked with 10.04 LTS) I have a Dell Inspiron 1501. I followed the steps posted below:(from a similar tag, but...) sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source echo "blacklist brcmsmac" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist bcma" | sudo tee -a /etc/modprobe.d/blacklist.conf ....and now i have no Network device on my PC(wired or wireless) I can use wired conection if i start my laptop with a"previsious version of Linux"...2.26.43... I am a beginner in Linux These are my hardware: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [ 14e4:4311] (rev 01) 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [ 14e4:170c] (rev 02)

    Read the article

  • Window's content disappears when minimized

    - by Carmen Cojocaru
    I have a simple class that draws a line when mouse dragging or a dot when mouse pressing(releasing). When I minimize the application and then restore it, the content of the window disappears except the last dot (pixel). I understand that the method super.paint(g) repaints the background every time the window changes, but the result seems to be the same whether I use it or not. The difference between the two of them is that when I don't use it there's more than a pixel painted on the window, but not all my painting. How can I fix this? Here is the class. package painting; import java.awt.*; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseMotionAdapter; import javax.swing.JFrame; import javax.swing.JPanel; class CustomCanvas extends Canvas{ Point oldLocation= new Point(10, 10); Point location= new Point(10, 10); Dimension dimension = new Dimension(2, 2); CustomCanvas(Dimension dimension){ this.dimension = dimension; this.init(); addListeners(); } private void init(){ oldLocation= new Point(0, 0); location= new Point(0, 0); } public void paintLine(){ if ((location.x!=oldLocation.x) || (location.y!=oldLocation.y)) { repaint(location.x,location.y,1,1); } } private void addListeners(){ addMouseListener(new MouseAdapter(){ @Override public void mousePressed(MouseEvent me){ oldLocation = location; location = new Point(me.getX(), me.getY()); paintLine(); } @Override public void mouseReleased(MouseEvent me){ oldLocation = location; location = new Point(me.getX(), me.getY()); paintLine(); } }); addMouseMotionListener(new MouseMotionAdapter() { @Override public void mouseDragged(MouseEvent me){ oldLocation = location; location = new Point(me.getX(), me.getY()); paintLine(); } }); } @Override public void paint(Graphics g){ super.paint(g); g.setColor(Color.red); g.drawLine(location.x, location.y, oldLocation.x, oldLocation.y); } @Override public Dimension getMinimumSize() { return dimension; } @Override public Dimension getPreferredSize() { return dimension; } } class CustomFrame extends JPanel { JPanel displayPanel = new JPanel(new BorderLayout()); CustomCanvas canvas = new CustomCanvas(new Dimension(200, 200)); public CustomFrame(String titlu) { canvas.setBackground(Color.white); displayPanel.add(canvas, BorderLayout.CENTER); this.add(displayPanel); } } public class CustomCanvasFrame { public static void main(String args[]) { CustomFrame panel = new CustomFrame("Test Paint"); JFrame f = new JFrame(); f.add(panel); f.pack(); SwingConsole.run(f, 700, 700); } }

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >