Search Results

Search found 1955 results on 79 pages for 'gnu toolchain'.

Page 37/79 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Module loaded even though it's blacklisted

  - by isakkarlsson

  System: Ubuntu 11.10 Linux gray 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux I'm trying to blacklist a module (rt2800usb among other) like; $ lsmod | grep rt rt2800usb 22300 0 rt2800lib 48717 1 rt2800usb crc_ccitt 12595 1 rt2800lib rt2x00usb 20092 1 rt2800usb rt2x00lib 48114 3 rt2800usb,rt2800lib,rt2x00usb mac80211 272785 3 rt2800lib,rt2x00usb,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 $ emacs /etc/modprobe.d/blacklist.conf and add: blacklist rt2800usb blacklist rt2800lib blacklist rt2x00usb blacklist rt2x00lib and then: $ sudo update-initramfs -u $ sudo reboot But the module are loaded after reboot: $ lsmod | grep rt rt2800usb 22300 0 rt2800lib 48717 1 rt2800usb crc_ccitt 12595 1 rt2800lib rt2x00usb 20092 1 rt2800usb rt2x00lib 48114 3 rt2800usb,rt2800lib,rt2x00usb mac80211 272785 3 rt2800lib,rt2x00usb,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 How do I make the changes persist (i.e. have the modules blacklisted) after reboot?

  Read the article

• Error when compiling bochs

  - by Isaac D.

  I'm trying to compile bochs. Here is my configure command: ./configure --enable-fpu --enable-3dnow --enable-x86-64 --enable-a20-pin --enable-cdrom --enable-debugger --enable-debugger-gui --enable-disasm Then I enter the "make" command and it compiles for some time. But then comes an error. /usr/bin/ld: gui/libgui.a(gtk_enh_dbg_osdep.o): undefined reference to symbol 'pthread_create@@GLIBC_2.2.5' //lib/x86_64-linux-gnu/libpthread.so.0: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status make: *** [bochs] Error 1 Can anybody help me with this error? Thank you in advance.

  Read the article

• Ubuntu 14.04 Notification incorrectly displayed

  - by xenolyse

  I have a problem with my notifications on Ubuntu 14.04 x64. The notifications are just plain text with a colored background, and are also strangely placed in the top left corner. I have no idea on how it changed. After one reboot it was just there.. Here is a picture of the problem in question.: As you can see the notification appear over the unified menu. How can I restore the original state of the notification bubble? Here are the settings in ~/.notify-osd slot-allocation = fixed bubble-expire-timeout = 10sec bubble-vertical-gap = 5px bubble-horizontal-gap = 5px bubble-corner-radius = 37,5% bubble-icon-size = 30px bubble-gauge-size = 6px bubble-width = 240px bubble-background-color = 131313 bubble-background-opacity = 90% text-margin-size = 10px text-title-size = 100% text-title-weight = bold text-title-color = ffffff text-title-opacity = 100% text-body-size = 90% text-body-weight = normal text-body-color = eaeaea text-body-opacity = 100% text-shadow-opacity = 100% If I check the org.freedesktop.Notifications.service(/usr/share/dbus-1/servies) it appears to use the correct one. [D-BUS Service] Name=org.freedesktop.Notifications Exec=/usr/lib/x86_64-linux-gnu/notify-osd

  Read the article

• How to host a simple website using a domain name I own

  - by Cedric Martin

  I'm familiar with hosting webapps when I'm doing "the whole shebang" of installing / configuring / setting up Apache/Tomcat/PostreSQL / "coding" the website myself using HTML / JSP / CSS etc. on dedicated servers I'm renting. But in the above case, I'm "owning" the entire stack: from the Debian GNU/Linux dedicated servers to every single file that is served. Now I'd like to do something much simpler and I must admit I don't know what's involved at all. I'd like to host a simple website made of only a few static pages (no database, no nothing) and I'd like it to be accessible from "example.com". What needs to be technically done to have such a thing? How is the DNS supposed to be set up? Note that I do not want to host this on one of my dedicated servers.

  Read the article

• permission denied errors while starting namenode in hadoop 2.2.0

  - by Riddle

  I recently installed hadoop2.2.0 on my desktop running : Linux livingstream 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Lin I am able to format the namenode just fine , however when I start the namenode using the following command: hadoop-daemon.sh start namenode I get the following permission errors , can anyone please help me with these errors: hduser@livingstream:/usr/local/hadoop$ hadoop-daemon.sh start namenode mkdir: cannot create directory `/var/run/hadoop': Permission denied starting namenode, logging to /var/log/hadoop/hduser/hadoop-hduser-namenode- livingstream.out /usr/sbin/hadoop-daemon.sh: line 138: /var/run/hadoop/hadoop-hduser-namenode.pid: No such file or directory Can you please help me with these errors. Best Regards, Ishan

  Read the article

• Eclipse not launching

  - by user274959

  I have installed Ubuntu 14.04, I have installed Eclipse using Ubuntu Software Center. But Eclipse is not opening, when I click it is not opening or showing any error message it is very silent. Output for java -version: java version "1.7.0_55" Java(TM) SE Runtime Environment (build 1.7.0_55-b13) Java HotSpot(TM) Server VM (build 24.55-b03, mixed mode) uname -a: Linux Lenovo-IdeaPad-Z510 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 i686 i686 GNU/Linux When I give Eclipse in terminal I am getting The program 'eclipse' is currently not installed. You can install it by typing: sudo apt-get install eclipse-platform And when I give sudo apt-get install eclipse-platform Reading package lists... Done Building dependency tree Reading state information... Done eclipse-platform is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.

  Read the article

• Compiling midnight commander

  - by notabene

  Hello, I need help with compiling midnight commander so that I can make some changes (for educational purposes). Or even creating the make files. After downloading latest version from git. I try to perform ./autogen.sh . Result is: maint/autopoint: 418: cannot open /usr/share/gettext/archive.tar.gz: No such file tar: This does not look like a tar archive tar: Exiting with failure status due to previous errors cvs checkout: cannot find module `archive' - ignored find: `archive': No such file or directory find: `archive': No such file or directory find: `archive': No such file or directory autopoint: *** infrastructure files for version 0.14.3 not found; this is autopoint from GNU gettext-tools 0.17 autopoint: *** Stop. I have installed gettext and folder /usr/share/gettext does exist. But there is no archive.tar.gz. I have no idea what should this archive contain or where to get it. Can you help me please?

  Read the article

• Boot-up hangs unless I manually select the kernel in the bootloader

  - by The Photon

  In my stock Ubuntu install (forgot which critter its named for, about one year old), I am able to boot up normally only if I manually select the kernel in the bootloader (Grub). If I step away and it boots from the default, the system will hang with the word "Ubuntu" on a graphics screen and a few white/red blinking dots beneath it. umb@digdug:~$ uname -a Linux digdug 2.6.32-42-generic #95-Ubuntu SMP Wed Jul 25 15:57:54 UTC 2012 i686 GNU/Linux Synaptics says I have 'grub-pc' version 1.98-1ubuntu-13 installed. My grub.cfg does have default="0" which I would expect to make the default be the first kernel shown in the selection screen. The system is a laptop with an i7 processor, and I have had trouble with some kernels not being able to boot at all in the past, and power management is not working perfectly, but I have not had problems booting the latest kernel (2.6.32-42) if I select it manually in Grub. Any idea what is going on here and how can I fix it so that I can re-boot unattended?

  Read the article

• Alsa version numbers not consistent

  - by user69245

  I've recently moved from 10.04 to 12.04 and have problems with crackles on audio when the screen changes (especially obvious in a Skype conversation with video). !!Kernel Information !!------------------ Kernel release: 3.2.0-26-generic-pae Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: 1.0.25 Utilities version: 1.0.25 Running through the SoundTroubleShooting procedures I got the above details at Step 3. Is the mismatch between the Driver version (1.0.24) and the Library and Utilities versions (1.0.25) the cause of my problem, or should I be looking elsewhere? In answers to the question "Will ALSA 1.0.25 version have time to enter 12.04?" I read that 1.0.25 would be part of the new kernel, but my kernel version appears to be newer than the original release.

  Read the article

• SFML title bar with weird characters when using UTF-8

  - by TheOm3ga

  (Previously asked at http://stackoverflow.com/questions/4922478/sfml-title-bar-with-weird-characters-when-using-utf-8) I've just started using SFML and one of the first problems I've come across is some weird characters on the the titlebar whenever I try to use accents or any other extended char. For instance, I've got: sf::RenderWindow Ventana(sf::VideoMode(800, 600, 32), "Año nuevóóó"); And the titlebar renders like AÂ+o nuevoA³A³A³ This ONLY HAPPENS if my source code file is enconded in UTF-8. If I change the file encoding to ISO-8859-1, it shows properly. Obviously all of my files use UTF-8, as its the system-wide encoding. I'm using GCC under Ubuntu GNU/Linux. I've tried using the different utilities in sf::Unicode to adapt the text, but none of them seems to work.

  Read the article

• Use hotplug and turn on/off PCI device for replacing NIC

  - by Ryota Hashimoto

  How can I turn off the PCI slots and change the device (especially NIC) without shutting the server down? I found a similar question (How do I turn off PCI devices?) but there are no /sys/bus/pci/slot and no files in /sys/bus/pci/slots. I'm using 12.04 LTS. $ uname -a Linux d1-c1-r1-p1 3.2.0-38-generic #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux $ lspci | grep Eth 04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 09:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 09:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) $ ls /sys/bus/pci/ devices/ drivers_probe slots/ drivers/ rescan uevent drivers_autoprobe resource_alignment $ ls /sys/bus/pci/devices/0000\:04\:00.0/ broken_parity_status driver modalias rescan subsystem class enable msi_bus reset subsystem_device config firmware_node net resource subsystem_vendor consistent_dma_mask_bits irq numa_node resource0 uevent device local_cpulist power resource2 vendor dma_mask_bits local_cpus remove resource3

  Read the article

• RTL8192SU-based Wi-Fi adapter disconnects permanently

  - by leventov

  I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

  Read the article

• Sound notification over SSH

  - by Lekensteyn

  I just switched from the Konversation IRC client to the terminal based IRSSI. I'm starting IRSSI on a remote machine using GNU screen + SSH. I do not get any sound notification on new messages, which means that I've to check out IRSSI once in a while for new messages. That's not really productive, so I'm looking for an application / script that plays a sound (preferably /usr/share/sounds/KDE-Im-Irc-Event.ogg and not the annoying beep) on my machine if there is any activity. It would be great if I can disable the notification for certain channels. Or, if that's not possible, some sort of notification via libnotify, thus making it available to GNOME and KDE.

  Read the article

• What is the situation about OpenGL under Ubuntu Unity and Gnome3?

  - by user827992

  In a GNU/linux distribution is usually installed Xorg as main graphical server, it operates with a client-server logic, a special windows is designate as desktop environment and this special windows can handle all the eyecandy stuff like decorations, icons and effects. The problem is that the latest UI heavily relies on hardware acceleration, Unity is an overlay on Compiz and the Gnome-shell also require an active driver for the GPU to work well: the problem is: on the same OS I can find multiple implementations of OpenGL who is handling my OpenGL buffer? how the OpenGL buffer is managed compared to the other windows? how can I be sure that my OpenGL implementation is glued to the hardware and is not related to the client-server logic of Xorg? For example I have tried the clutter library and I have only experienced problems under both Unity and GTK/Gnome, no problem under other OS.

  Read the article

• Problem installing skype on ubuntu 12.10 : Error in sound packages

  - by damned

  I tried to install Skype on my ubuntu 12.10 via command line $ sudo apt-get install skype I received this error : The following packages have unmet dependencies: libasound2-plugins:i386 : Depends: libasound2:i386 (>= 1.0.25) but it is not going to be installed skype-bin:i386 : Depends: libasound2:i386 (>= 1.0.23) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I tried the suggestion, $ sudo apt-get -f install I get the following error : Unpacking libasound2:i386 (from .../libasound2_1.0.25-3ubuntu3_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libasound2_1.0.25-3ubuntu3_i386.deb (--unpack): trying to overwrite shared '/usr/share/alsa/alsa.conf', which is different from other instances of package libasound2:i386 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libasound2_1.0.25-3ubuntu3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Configuration of my ubuntu is as follows : $ uname -a Linux sumitb-pc 3.5.0-21-generic #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Please help me out here ! :)

  Read the article

• Where do I look to investigate how guided partitioning in the Ubuntu Server 12.04 installer works?

  - by Kent

  I would like to know how the installer, and in particular the guided partitioning for Ubuntu Server 12.04 works under the hood. I'm not interested in documentation, I want to check out the real scripts and the logic in them. How do you recommend I dig into this? Where on the ISO are these parts located? I don't know what the installer for Ubuntu is called, or how it is configured. I am well versed in programming languages and command line GNU/Linux.

  Read the article

• wubi boots into grub after 12.04 install

  - by josh

  I would just like to recover the files off of the wubi install and then install a proper version of ubuntu, is there any way to recover the files? for further information. I had ubuntu 11.04 and used the update manager to update it to 12.04. it worked for aproximitely a day and then I had to do a hard reset the next day after what seemed to be artifact corruption. upon trying to reboot into ubuntu it brings up the grub command prompt "gnu grub version 1.99-12ubuntu5" i have previously done hard resets on it in the past, there is nothing in my windows hidden 000 recovery folder.

  Read the article

• Remove Ubuntu 11.10 from Dual Boot Windows XP without XP CD?

  - by Thomas

  I installed Ubuntu on a old Windows XP computer using Dual Boot, i have no XP Cd and desperately need to remove it! EasyBCD does not work on windows XP, iF I just delete the Ubuntu partition all hell breaks loose and i have to reinstall ubuntu to get my XP back. Please help me i am only 12 and i have made a stupid error on my mum and dads computer and will get into serious trouble if i dont fix it soon!. Extra Information: I use the gnu boot loader to choose my operating system, but my mum and dad need my help to open a word document, they have only just grasped double clicking! I installed it off a cd that i made, the computer is 64-bit AMD Athlon with one 160gb hard drive, 512mb ram and a Sis mirage2 128mb shared video card. Its a COMPAQ presario.

  Read the article

• Ubuntu 12.10 Help! Everything is incredibly slow

  - by Keith

  I installed 12.10 from usb onto this machine. Intel celeron 2.00 GHz 496MB RAM I had to modify GNU-Grub to read "nomodeset" or i could not see the GUI. I have an Nvidia graphics card. Takes about 2 minutes to boot. The icons on the left of desktop take about 1 min to slowly open their menu. Have a network connection but mozilla is 404 and i cannot update. Where can i find a blow by blow explanation for troubleshooting and repairing this problem?

  Read the article

• Oracle VM VirtualBox 4.0 toujours gratuit mais pas ses nouvelles extensions, payantes pour les entreprises

  Oracle VM VirtualBox 4.0 Toujours gratuit mais pas ses extensions, payantes pour les entreprises Oracle vient d'annoncer la disponibilité en version finale de sa nouvelle solution de virtualisation Oracle VM VirtualBox 4.0. issue du rachat de Sun Microsystems. VirtualBox 4.0 est disponible sous licence open-source GNU GPL 2 et supporte plusieurs plate-formes (dont Windows et Linux 32 et 64 bits). Cette version d'Oracle VM VirtualBox intègre plusieurs nouvelles fonctionnalités, dont certaines sont livrées sous forme d'extension. Ces Extensions Packs sont mises à disposition suivant la licence PUEL (Personnal Use and Evaluation Licence), autrement dit, accessible gra...

  Read the article

• 12.04 indicates filesystem check on next boot, but never does one

  - by pcm

  Just installed 12.04 32 bit on my machine, with 3 drives. When I open a terminal window or ssh in remotely, I see: Welcome to Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-29-generic-pae i686)  * Documentation:  https://help.ubuntu.com/ *** /dev/sda1 will be checked for errors at next reboot *** *** /dev/sda2 will be checked for errors at next reboot *** *** /dev/sdg1 will be checked for errors at next reboot *** Last login: Fri Aug 31 08:15:41 2012 from .... However, if I reboot, I never see it doing a disk check on boot up, like I used to see with 10.10. Note, after install, I was not seeing the grub menu on boot. I made a ISO disk with BootRepair and now I get the normal grub menu. Any idea as to why the disk check is not happening on boot (I know I can boot a Live CD and then check the disk - I just want the check on boot working)?

  Read the article

• HIB Games (Aquaria & Penumbra) cannot find libGL.so.1 even though it exists

  - by aberration

  I'm try to play some Humble Indie Bundle (HIB) games, but I'm getting errors with Aquaria and Penumbra: Overture that are related to the libGL.so.1 file. Aquaria gives this error on launch: Message: SDL_GL_LoadLibrary Error: Failed loading libGL.so.1 And Penumbra: Overture gives this error on launch: ./penumbra.bin: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory I know that the file libGL.so.1 does exist (in /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1). From past errors like this, I'm guessing that you need to symlink the library to another directory, but I can't figure out which one.

  Read the article

• Wireless always disconnect

  - by Silas

  I upgraded my Ubuntu 10.10 for Ubuntu 12.04. I have a Emachines E625 With Ubuntu 12.04 my wireless always disconnects every 10 sec. It didn't do that with 10.10. Here is my config: Linux sylvain-eMachines-E625 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 i686 athlon i386 GNU/Linux total used free shared buffers cached Mem: 1759 1425 333 0 46 925 -/+ buffers/cache: 452 1306 Swap: 1788 0 1788 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) I will really enjoy an answer to solve this problem. Thank you in advance! Silas

  Read the article

• Xubuntu all Icons disappeared

  - by user1392185

  I'm running Xubuntu 12.04.1 with kernel Xen4.1-amd64 and the following problem is mine: Nearly all icons have been replaced by the default "no icon available"-icon, even on the login screen and the all icons in software like e.g. Firefox and the icons I manually assigned to launchers, too. Changing the icon theme does not seem to affect this. The only icons that did not disappear are: LibreOffice, gThumb, Simplescan, Ristretto and in the XFCE menu office, tools and graphics. How could I bring the icons back? EDIT: When I tried to use Ristretto the following error showed up: Could not load image-loader module /usr/lib/x68_64-linux-gnu/gdk-pixbuf-2.0/2.12.0/loaders/libpixbufloader-png.so Unable to open shared-object-file I/O error (Had to translate this to English.)

  Read the article

• nut (UPS) and SSL certificates

  - by Mausy5043

  Today I installed nut on my Ubuntu server (14.03). $ uname -a Linux boson 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux The UPS is connected to another server (called neutron), so I use nut-client to keep tabs on the UPS state. When I do sudo upsc [email protected] I get: Init SSL without certificate database battery.charge: 15 battery.charge.low: 10 battery.charge.warning: 50 battery.date: not set battery.mfr.date: 2012/11/27 : The first line of the output concerns me. I've not seen this on other installations of nut on Debian-based servers. What can I do to get rid of that line? EDIT: This "Init SSL without certificate database" is extra annoying because it is not part of the output of upsc and therefore I cannot grep it out.

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >