Search Results

Search found 14372 results on 575 pages for 'home premium'.

Page 37/575 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • MSI netbook refuses to connect to home wireless network with Windows XP

    - by sa125
    I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

    Read the article

  • Laptop recommendation for home user

    - by Mehper C. Palavuzlar
    I'm going to buy a new laptop soon and I need Super Users' recommendations. The following criteria are crucial for me: Intel i series processor Min. 4 GB RAM Min. 500 GB HDD HDMI port Min. 3 USB ports Not a monster, but a good graphics card Multimedia card reader DVD-RW Double Layer No heating problems! What do you recommend me? I'm considering buying a Vaio but I'm not sure. TIA.

    Read the article

  • How to configure QoS on home router

    - by Joril
    I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

    Read the article

  • How to configure QoS on home router

    - by Joril
    I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

    Read the article

  • Custom DHCP Server on home network

    - by DanSpd
    Hello I have a computer network at my house which consists of two computers and one server. I have a software on dedicated server which requires direct connection to internet (port forwarding doesn't work for this). So I plan to setup network in following way. link text Please let me know if this will work. How good or bad could this be? Internet Connection: Verizon Fios 25/25

    Read the article

  • Custom DHCP Server on home network

    - by DanSpd
    Hello I have a computer network at my house which consists of two computers and one server. I have a software on dedicated server which requires direct connection to internet (port forwarding doesn't work for this). So I plan to setup network in following way. link text Please let me know if this will work. How good or bad could this be? Internet Connection: Verizon Fios 25/25

    Read the article

  • Dell Optiplex GX620 > windows xp home addition OU7670

    - by Ren D
    My question is my Dell Optiplex 620 is not working properly !! when i turn it on it goes automaticaly to bios and says click on safe mode or safe network or best last start up or normal mode ?? but when i click on normal it comes back to that window then i click on safe mode and it works for about 5 min then it reboots its self every time what can i do ? i checked if there was a virus and its clean !! please help

    Read the article

  • enable offline files for all users home drives via Group policy or other

    - by JohnyV
    I am trying to get all users of particular notebooks to make the users h drive offline. i know you can do it manually but is there a way to set this value somewhere so that users dont have to do it themselves? I am running 2008r2 domain controllers and windows 7 clients. I have folder redirection enabled but i want to make the users h: available to them when they are offline. I know the group policies are located in the computer configurationPoliciesadministrative templatesNetwork but there doesnt seem to be any place to select which folders/drives will be offline files without a users input. Even if there is another method not through GP. Thanks

    Read the article

  • Thoughts on home NAS server

    - by user826955
    I currently have a NAS with a 2x2TB HDD 1x16GB SSD layout on a mini-itx atom board. The NAS is in a Lian Li PC-Q07 case. On this system I was running freebsd 8 with a gmirror raid 1 setup, which was enough for my needs. So far I was using the NAS for: Fileserver with AFP protocol (only mac clients used) SVN server hosting all my source trees of my projects JIRA (performance was okay-ish) Timemachine backup for the macs The power consumption was about 38W, although I did not put HDDs asleep when unused (I think this is not possible in a raid setup). I liked the NAS because: the performance was good through gigabit LAN (enough for my needs) power consumption was good its a pretty small case and fits in one of my cupboards I disliked the NAS a bit because: it was a bit noisy, the Q07 case vibrated a good amount because of the HDDs. I switched the NAS off every evening I do not have a real backup of the data on the NAS, only the internal raid 1 as safety. I really dont want to loose my source trees under no circumstances, so I would really be sleeping better if I knew I had regular backups somewhere. Recently, the board seemed to have died, I can't boot anymore. Thus, I was thinking about a redesign of my NAS (I still have to find out what parts are broken, I probably need to replace the mainboard and SSD. HDDs seem to be okay). First of all, I was wondering what other users have as backup for their NAS? Are you actually using a second NAS, and regularly copying over the data to have it safe? Or is there any better solution to this? I was thinking about getting a cheap NAS like the synology DS112j with only one disk, and use rsync or something similar to regularly copy data over to the second NAS (wake the second NAS upon start, shut it down after copy). Although this approach seems somewhat weird, It would have the benefit (?) that I could use a single disk instead of raid in the main NAS, and put the disk asleep when idle, and have the NAS running 24/7 with low energy consumption (I found no way to do this with a gmirror setup). Is there any recommended backup solution for a small NAS? Then I was thinking about a different raid setup. Since I have to buy a new mainboard as well as SSD, I might as well switch over to a i3 board with more ram, and also switch to ZFS. I am not familar with ZFS, I've never used it, but I read and hear much about it. Would it be viable to set up a ZFS storage with only 2 disks? Can I easily extend this storage with more disks, once I choose to add some? I could maybe get a new case like the Fractal Design Array R2 which has more 3,5" slots. I could as well get another 2 disks, but I would prefer sticking with the existing 2 for enegery/heat/noise reasons. Should I go for a ZFS storage or stick to my gmirror setup? I would also like to keep freebsd as operating system, and also I dont need any web gui or something (that is, I dont need/want to use FreeNAS or Openfiler etc). Does anyone maybe have a sample setup in use so I can compare energy consumption/noise/software setup? Any guidance towards the NAS of my dreams (silent, low energy, safe w/ backups) much appreciated.

    Read the article

  • Email hosting on home's Windows server 2003

    - by klay
    Hi guys, I am new to Server management, I have a static Ip address and I bought recently a domain name, I configure the domain name to target my Ip address. I am running windows server 2003 standard. what are the steps to host my email adresses? Do I need to buy anything else, or what I have is enough (static ip address, domain name, win server 2003, exchange server 2003) ?? thanks Guys

    Read the article

  • Home-made HTTP proxy server [closed]

    - by Martin Dimitrov
    I wanted to help a friend who has some restrictions at work to visit certain sites. Locally, on a Windows 7 machine, I run Apache server and decided to make it a proxy just for the IP of my friend. So I added the following to the configuration file: ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Deny from all Allow from <his.ip> </Proxy> It worked fine. But shortly the proxy started to receive many requests of the form: 66.249.66.242 - - [22/Sep/2012:11:01:12 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BSy2T9L_L8PitQapwtHtBw&ved=0COQBEB8wPw HTTP/1.1" 403 208 66.249.71.36 - - [22/Sep/2012:11:01:49 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BOCzT-_WK8_0sgbki5XCDA&ved=0COABEB8wPg HTTP/1.1" 403 208 These are Google IPs. The requests are every 30 seconds or so. My friend is not at work today. In apache_error.log I see: [Sat Sep 22 11:09:20 2012] [error] [client 66.249.66.242] client denied by server configuration: C:/wamp/www/aclk [Sat Sep 22 11:09:47 2012] [error] [client 66.249.71.36] client denied by server configuration: C:/wamp/www/search What the hell is going on? Please, help.

    Read the article

  • Does Windows 7 Home Premium support Dual Core Processors?

    - by nicon
    I'm looking to buy a new laptop (the new studio 14 from Dell). The processor for this laptop is an Intel Core i5-520M. Think link http://reviews.cnet.com/8301-31012_7-10379487-10355804.html says that it supports only 1 CPU. Also Dell recommend the Professionnal version even tough Home Premium is the default choice. So I'm a little confuse as does Windows 7 Home Premium support Dual Core Processors ?

    Read the article

  • Cat5 wiring in my home [closed]

    - by Mike
    I have problem with cat5 cabling First I ran a length of cable 30 metres to my bedroom 1 and and connected both ends to a wall sockets internally using my punch down tool, both ends look fine. I also ran a cable from bedroom 1 to bedroom 2 so my son can use same internet connection , i then parallel connected my cables in bedroom 1 against using punch down tool using same colours all the way through. I ran a Ethernet cable from modem to first wall socket close to it then at bedroom end used another Ethernet cable to connect pc, it wouldn't connect to pc so I disconnected bedroom 2 cable from bedroom 1 socket. I connected bedroom 1 to pc and it worked, but how do I connect bedroom 2 (obviously cat 5 cable bedroom 1 to 2 is in place) As soon as I connect one wire from bedroom2 I loose Internet connection!

    Read the article

  • convert home phone wiring to Ethernet

    - by aaa
    can i convert phone wiring in walls to act as only Ethernet network cause the phone wiring is not in use and not connected to the phone company so there is no voltage in the wires i remove the wall plate and i find 6 wires blue,blue/white,green,green/white,orange,orange/white , and i know that Ethernet use 8 here is what i am thinking get Ethernet cable cut it in half and attach wires from wall to the first computer and the same with the other computer so if this is possible do i just attach wires in the same color and ignore brown wire or do i have to rearrange wires , and how much the speed will be thank you in advance

    Read the article

  • convert home phone wiring to Ethernet

    - by aaa
    can i convert phone wiring in walls to act as only Ethernet network cause the phone wiring is not in use and not connected to the phone company so there is no voltage in the wires i remove the wall plate and i find 6 wires blue,blue/white,green,green/white,orange,orange/white , and i know that Ethernet use 8 here is what i am thinking get Ethernet cable cut it in half and attach wires from wall to the first computer and the same with the other computer so if this is possible do i just attach wires in the same color and ignore brown wire or do i have to rearrange wires , and how much the speed will be thank you in advance

    Read the article

  • Recomended home ADSL wireless routers

    - by beakersoft
    I'm going to buy a new ADSL wireles broadband router, but i'm not sure what might be a good one. I want it to have some form of QOS on it, and SNMP support so i can see my port usage over MRGT. I've looked at various models but they all seem to have conflicting reviews, i am looking at something along the lines of the Dlink DSL-2740R but any suggestions would be much apreciated

    Read the article

  • Software to report internet traffic for home user

    - by Mehper C. Palavuzlar
    I need a freeware to monitor my internet activity, especially upload and download amounts over time. For instance, I like to see a graph or table that shows the downloaded and uploaded amounts per day, week or month and in total for a selected period. OS: Windows XP, Vista, 7 Edit: I don't need to see the traffic program by program. I'm not interested in which program accesses the internet, but I'm interested in monitoring my incoming and outgoing data amounts using a light-weight freeware.

    Read the article

  • Need hard disk recommendation for linux home server.

    - by neotracker
    Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

    Read the article

  • Choosing a home network layout

    - by James M.
    I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

    Read the article

  • Extending a home wireless network using two routers running tomato

    - by jalperin
    I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

    Read the article

  • How can I use mobile network account at server so home sync works

    - by Mike Gallagher
    I would like to be able to use a mobile network account while sitting at my server. I had os x server 10.6 running on a mac mini server but recently got a new quad core iMac and want to take advantage of the extra power. My problem - I can sit at the server and log into the mobile network account but can not get it to sync back. When I attempt to sync it get error message that the afp share point is unavailable and that the files are hosted locally. My goal is to be able to use the new iMac as the server and set a user account so that it remains synced so when the account is accessed from other clients, particularly my macbook pro. Is mobile account the best route? Would an external account be a better option. Any advice or ideas of where to read up on this would be much appreciated.

    Read the article

  • Windows7 home 64bit + Outlook 2010, multiple non-concurrent users

    - by Jim Taylor
    We have one windows computer shared by eight people. I have set up separate login accounts for each user. One account has administrative privileges, the others are standard users. We installed Outlook 2010 with the intention that each user could access their own email separately, without seeing the mail of other users. This has not worked as we intended. When the administrator logs in to each standard user account and starts the outlook mail setup, he is prompted for the administrative password, and then sets up the mail account. When accessing the outlook mail program after setup, each mail account shows as a separate tab in a communal inbox, rather than a separate mail box for each user. How would we accomplish the desired separation of Outlook mail accounts? Thanks for your advice Jim T.

    Read the article

  • Setting up home DNS with Ubuntu Server

    - by Zeophlite
    I have a webserver (with static IP 192.168.1.5), and I want to have my machines on my local network to be able to access it without modifying /etc/hosts (or equivalent for Windows/OSX). My router has Primary DNS server 192.168.1.5 Secondary DNS server 8.8.8.8 (Google's public DNS). Nginx is set up to server websites externally as *.example.com Internally, I want *.example.local to point to the server. My webserver has BIND9 installed, but I'm unsure of the settings. I've been through various contradicting tutorials, and so most of my settings have been clobbered. I've stripped out the lines which I'm confused about. The tutorials I looked at are http://tech.surveypoint.com/blog/installing-a-local-dns-server-behind-a-hardware-router/ and http://ubuntuforums.org/showthread.php?t=236093 . They mostly differ on what should be put in /etc/bind/zones/db.example.local and /etc/bind/zones/db.192, so I've left the conflicting lines out below. Can someone suggest what the correct lines are to give my above behaviour (namely *.example.local pointing to 192.168.1.5)? /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.254 /etc/hostname avalon /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local zone "example.local" { type master; file "/etc/bind/zones/db.example.local"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.192"; }; /etc/bind/zones/db.example.local $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 5 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL /etc/bind/zones/db.192 $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 4 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; What do I need to add to the above files so that on a laptop on the internal network, I can type in webapp.example.local, and be served by my webserver? EDIT I made several changes to the above files on the webserver. /etc/network/interfaces (end of file) dns-nameservers 127.0.0.1 dns-search example.local /etc/bind/zones/db.example.local (end of file) @ IN NS avalon.example.local. @ IN A 192.168.1.5 avalon IN A 192.168.1.5 webapp IN A 192.168.1.5 www IN CNAME 192.168.1.5 /etc/bind/zones/db.192 (end of file) IN NS avalon.example.local. 73 IN PTR avalon.example.local. As a side note, my spare Win7 machine was able to connect directly to webapp.example.local, but for a Ubuntu 13.10 machine, I had to make the following changes as well (not on the webserver, but on a separate machine): /etc/nsswitch.conf before hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 after hosts: files dns /etc/NetworkManager/NetworkManager.conf before dns=dnsmasq after #dns=dnsmasq The issue remains that its not wildcard DNS, and so I have to add entries to /etc/bind/zones/db.example.local for webapp1, webapp2, ...

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >