Search Results

Search found 14372 results on 575 pages for 'home premium'.

Page 44/575 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Setting up a wireless network with Verizon MiFi

  - by winarm

  I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

  Read the article

• Routing internet through ethernet to a computer without a Wireless adapter

  - by Decency

  I'm setting up a small home network. I have a laptop which connects to internet wirelessly- that works fine. I have a desktop connected to this laptop by an ethernet cable which I'd like to access the internet with. In the past, I have used a different laptop to do this and had no problems doing so. Both computers run Windows 7. I have tried setting up a homegroup and disabling Windows firewall, as well as restarting both computers. I can share data but my internet connection can not be accessed through the desktop. (I understand USB network adapters are cheap, I have one on the way but that doesn't solve this issue.) Any help or live chat support if you'd prefer would be appreciated. Thanks!

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• What is a good programmer's desk? [closed]

  - by Jim

  I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly. The Herman Miller Sense desk looks nice. Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

  Read the article

• Connected 2 routers, but they won't talk

  - by ekolis

  I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

  Read the article

• Can't access an internal IIS web site via IP address, only hostname

  - by chris-untrod-com

  I have a machine on my home network running Windows Server 2008 (IIS7) with a web application running under default website called HTCOMNET. The network is just on a Windows Workgroup. The server is named nas1 and has a (dynamically assigned) IPv4 address of 192.168.2.12. I can ping 192.168.2.12. When I ping the machine by name ("nas1"), the hostname resolves to an IPv6 link-local address (as opposed to the ipv4 address). In a browser, I can go to http://nas1/HTCOMNET/ and IIS serves the site, no problem. But if I go to http://192.168.2.12/HTCOMNET, no dice. I have all the windows firewalls turned off. Any idea what's going on? I can't for the life of me figure out why I can't hit IIS via the IP. I feel like it's something really obvious, but i can't figure out what. Thanks!

  Read the article

• HP MediaSmart server system disk full

  - by Blanthor

  I have a HP MediaSmart Server (EX 490) with Windows Home Server out of the box. It comes with a single 1.0 TB drive partioned 20 GB for the System disk. The system disk keeps filling up. I haven't installed anything but McAfee. Without getting into the philosophical discussions of why they would partition it thus, what is the likely culprit of this debacle? My D: Partition has plenty of space. I can get into the server only through Remote Desktop.

  Read the article

• How can I view my IIS hosted sites on other machines on my network

  - by Truegilly

  Hello, at home i have a simple network setup conatining 2 machines and 1 belkin router. On one machine i have a site hosted with IIS7. Rather than the standard localhost/index.htm address i have added an entry in the HOSTS file pointing the local ip (127.0.0.1) to this domain - www.mysite.dev. i can access the site with www.mysite.dev with no problem. what i would like to do is be able to view this site from my other machine on the network. initially i assumed this could be done with a url like so MACHINE-NAME/www.mysite.dev, but the connection always times out. But I can ping MACHINE-NAME without problems. For testing purposes i have diabled the windows firewall on both machines but to no joy. Like a typical web developer, my techy/network skills are pretty poor. Can anyone see where im going wrong ?? thank you for your time Truegilly :)

  Read the article

• Why does python easy install give me "permission denied" errors?

  - by Golden Sinha

  When i try to install program in ubuntu 12.04 it shows the error. program 1 : home@home-Compaq-610:~/Desktop$ python setup.py install running install running build running build_py creating build creating build/lib.linux-i686-2.7 copying Calculator.py - build/lib.linux-i686-2.7 running install_lib copying build/lib.linux-i686-2.7/Calculator.py - /usr/local/lib/python2.7/dist-packages error: /usr/local/lib/python2.7/dist-packages/Calculator.py: Permission denied . program 2 : home@home-Compaq-610:~/Desktop$ sudo chmod +x Moto.bin [sudo] password for home: home@home-Compaq-610:~/Desktop$ it shows like this but it do not install the program. program 3 : home@home-Compaq-610:~/Desktop$ python setup.py install [ERROR] wxPython2.8 is required. how to install wxPython2.8 please tell. if i try to install this program using easy_install it shows like this. home@home-Compaq-610:~/Desktop$ easy_install editra error: can't create or remove files in install directory The following error occurred while trying to add or remove files in the installation directory: [Errno 13] Permission denied: '/usr/local/lib/python2.7/dist-packages/test-easy-install-6778.pth' The installation directory you specified (via --install-dir, --prefix, or the distutils default setting) was: /usr/local/lib/python2.7/dist-packages/ Perhaps your account does not have write access to this directory? If the installation directory is a system-owned directory, you may need to sign in as the administrator or "root" account. If you do not have administrative access to this machine, you may wish to choose a different installation directory, preferably one that is listed in your PYTHONPATH environment variable. For information on other options, you may wish to consult the documentation at: http://packages.python.org/distribute/easy_install.html Please make the appropriate changes for your system and try again. home@home-Compaq-610:~/Desktop$ please help me . please tell how to install programs..

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - Setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. My ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LAMP: How do I set up http://myservername.com/~user access?

  - by Travesty3

  Been trying to Google this, but I can't figure out good search terms to find any info about what I need, since I don't really know what it's called. I'm pretty much being thrown to the wolves to figure out how to set up a LAMP server. We had someone who knew how to do it, he set one up and then quit. It was set up so that when I went to "http://{myservername}.com/~travis" it showed the contents of my /home/travis/public_html folder. This worked fine, then we lost power and the server restarted (I know, battery backup, but this is a dev server in a dev building so it's OK). Now, the browser can't find that URL. I also need to know how to set this up on a new server, so instead of wasting time diagnosing this problem (probably just something dumb I did messing with settings or something), I really need to know how to set this up from scratch. Thanks for taking the time to read this and (hopefully) answer!

  Read the article

• How do I leverage the power of my desktop from my laptop?

  - by TheDeeno

  I have a powerful desktop, and a decent laptop. My laptop is my primary machine. When I'm home, I'd like to "tap into" the power of my desktop while using my laptop. I'm not thinking a solution like "remoting in" and actually using my desktop from my laptop. I mean sending work to the desktop when my laptop is taxed in a seamless way. Is this possible at all? How would I do it? I'll do whatever is necessary to my desktop to enable this if it's feasible. My laptop has Vista installed.

  Read the article

• HP Media Smart remote access

  - by Coov

  I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

  Read the article

• How can I make my Ubuntu server accessible to the internet ?

  - by wahid

  Hi, I already installed applications to make my server web server. when I type the DHCP released ip address in the web browser, i can access it but all it says is "it works....etc". I can copy files to /var/www successfuly using WINSCP but yet, i can not see any files when I connect to it using my windows machine in the browser. Secondly , I tried to forward port on my home SMC router, it only accepts local lan ip which my ubuntu server picks up internet ip from router...what should i do ? can you help please ???? Thanks,

  Read the article

• It's the ethernet 10/100 in LAN transfer faster than USB 1.0?

  - by dag729

  I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU. The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop. The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?

  Read the article

• Homegroup libraries visible but can't be opened

  - by majocha

  I have 2 Windows 7 PCs in a home network. When I create a homegroup, the libraries I share are visible on the opposing machine but when I doubleclick them nothing happens - no error message, nothing at all. It is the same on both computers. The homegroup works to the extent that the printer I shared is visible and can print from the other computer. Only the libraries are inaccessible. What I tried and checked so far, without result: disabling firewall file and printer sharing, MS Networks client enabled in network properties deleting and recreating homegroup reset homegroup by deleting C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking unsharing and sharing again the libraries

  Read the article

• How can I deactivate the gnome desktop of my ubuntu server?

  - by 19 Lee

  I'm running a home server on my old laptop (atom cpu). I installed ubuntu 12.04 server edition, but I also installed ubuntu-desktop. So, when I turn it on, ubuntu desktop is shown. I sometimes use GUI, but I want to turn the ubuntu-desktop (gnome-desktop) off when I don't use it. I think I can save resources by turning off the GUI. It's necessary since my laptop's performance is not very good and it often becomes very hot. I guess I can run ubuntu-desktop on my terminal with "startx" command. But, I don't know how to turn the X window off for a moment. Anybody have an idea? Thanks in advance.

  Read the article

• How do I recover my router password without resetting it?

  - by Pacerier

  I want to know the password of my router. The default username and pass isn't working. I've read this thread i forgot my wireless router password. what do i do . . however it tells me to reset the router (I do not wish to reset the router to factory settings) This is my router: Linksys Wireless-N Home Router WRT120N I'm thinking there's some way we could get the password (or bypass the need to) that we need to enter 192.168.1.1?

  Read the article

• error/message: the disk drive for /home is not ready... when connecting an external hard drive

  - by seallussus

  i am running Ubuntu 10.04 all updated installed to date (3/28/2012) and when i connect another sata HD i get this message the disk drive for /home is not ready yet or not present continue to wait, or press S to skip mounting or M for manual recovery so i press S but i get this message could not update ICEauthority file /home/username/.ICEauthority And when a press close i get this there is a problem with the configuration server (/usr/libconf2-4/gconf-sanity-check-2 exited with status 256) And when a press close i get message Nautilus could not create the following required folders :/home/username/desktop,/home/username/.Nautilus before running Nautilus, please create these folders or set permissons such that Nautilus can reach them And finally when a press Ok at the last message it disappears and i get a blank screen with a lot of colors on it and with nothing else so i shutdown (power button ) and disconnect the HD and boot without problems so how to fix this in simple commands because i am a total Linux noob notes -In the original error my username was in place of username i wrote (did not want to confuse anybody ) -I tried searching for this problem but a got a lot of different answers and most of them were really complicated to me and not working -I got a data HD connected and working without problems also the HD i installed Ubuntu on is Sata (maybe it helps) -Apologize for me bad English its not my mother language

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• Data unaccessible from WHS drive

  - by Eakraly

  Hi all, I had a Windows Home server machine that crashed. Before doing anything I decided to get data out of it. So I took the hard drive and connected it to Windows7 pc. What I get is that I cannot access almost any file! I do see directory structure, I can open small files like .txt and .ini but bigger files like .iso and video - no go. Same goes for Ubuntu and OS X - I can see files and even copy them - but they are corrupted. Any ideas for what the problem is?

  Read the article

• Data unaccessible from WHS drive

  - by Eakraly

  Hi all, I had a Windows Home server machine that crashed. Before doing anything I decided to get data out of it. So I took the hard drive and connected it to Windows7 pc. What I get is that I cannot access almost any file! I do see directory structure, I can open small files like .txt and .ini but bigger files like .iso and video - no go. Same goes for Ubuntu and OS X - I can see files and even copy them - but they are corrupted. Any ideas for what the problem is?

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >