Search Results

Search found 8570 results on 343 pages for 'power saving'.

Page 37/343 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Laserjet Experts: How many power cycles per month?

  - by marienbad

  I recently got a nice Laserjet 8100DN for my house. I will probably never print more than 1% of its rated monthly duty cycle. But it runs some fairly noisy fans 24/7 if it's left on, so I am in the habit of turning the machine off as soon as I'm done with it. So, for all you who have a lot of experiencing administrating workgroup LaserJets, do you think I'll end up killing it from too many on-off cycles?

  Read the article

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• Saving each layer of a Photoshop image to separate files

  - by BadKnees

  I have a PSD file with all icons in separate layers as vectors. I would like to save them in different sizes to use in iPhone, iPhone4 and iPad. I tried Files Scripts Export Layers to Files That took about 15 minutes to save each layer while the computer was overheating from the work. Tried with two different computers, one with CS4 and the other with CS5. Same result. And that doesn't allow me to set sizes. Seem like most icon packs, like pictos, glyphish and iconsweets are distributed in this way, in one PSD file. Is some easy way to get them out of the PSD and into PNG files?

  Read the article

• Redundant APC UPS units, single server set up

  - by Sholom

  Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

  Read the article

• Saving Photoshop workspace doesn't remember docked panel state

  - by johnh

  A friend of mine has recently setup his computer with a fresh install of Windows 7 and Photoshop CS5. He's having a strange issue with saved workspaces not remembering the state of docked panels. As an example, he's docked several panels on the right of the screen. The Layers panel is docked but is open, showing all layers in the document. If he saves this as a workspace, closes and reopens Photoshop and loads the workspace, the Layers panel is docked but is closed. It's not the only panel this is happening with. It's not a big problem but he's having to open 4 panels and drag them to the appropriate height each time he starts Photoshop. Does anyone know of a possible fix for this? Any insight would be great.

  Read the article

• PDF form (not) saving

  - by gregseth

  Hi, I've created a form in a PDF with Adobe Acrobat Pro. When empy, I want to use it as a template which the user opens, fills in, and saves as a copy to preserve the blank state of the template. Here's the trick : I found both ways to make the document read only - the user can't save the form value, only print them make the document writeable, but in this case the document acting as a template can be modified too. Any ideas? Thanks.

  Read the article

• saving and searching encrypted mail

  - by user53616

  I often send and receive gpg-encrypted mail. At the moment I use thunderbird + enigmail (in linux) to do that. As far as I know there is no way in thunderbird to find all encrypted messages which bodies contain particular keywords. There also seems to be no option to save encrypted mails decrypted (so they would be searchable). However for me it is important to be able to search old encrypted mails. So my question is: Is there a way in linux to save incoming mails automatically decrypted in my inbox and save outgoing encrypted mail decrypted in the send folder? Both times adding a line to the body which remarks that the mail was encrypted. It could be another email client for linux that could to that or perhaps a solution using procmail or maildrop. For a procmail solution I guess there could be some problems with encoding (perhaps one have to use emil?). Note that the solution should work for multipart encrypted messages (including encrypted attachments) too. Further note that I don't want a discussion about security holes. For me it's ok if messages are stored decrypted on my harddrive (which is encrypted as a whole anyway). In doubt for a first solution it would be ok to store my private key passphrase in cleartext on my harddrive, too. The point is that the mails are encrypted on the mailserver or more generally on their "way through the net".

  Read the article

• Keyboard Slow on a high power machine.

  - by Tim Pierson

  I am having a terrible time with my high powered machine. The keyboard is not displaying the keys as quickly as I type. Sometimes I have to wait up to a minute for the key to display. When I type ahead it sometimes loses characters. I am not sure where to start looking for this problem. It started about a month ago and I still have not figured out why. It does not always do it. But acts up about 2-3 minutes out of ever hour of use or thereabout. How can I look to isolate and find the problem, and solve it?

  Read the article

• Power Shell does not like command

  - by Campo

  Any ideas what I did wrong here? I copied this script from a tutorial and get this error.... PS C:\Windows\system32> Get-Service | Where-Object ($_.status -eq "running") Where-Object : Cannot bind parameter 'FilterScript'. Cannot convert value "False" to type "System.Management.Automation .ScriptBlock". Error: "Invalid cast from 'System.Boolean' to 'System.Management.Automation.ScriptBlock'." At line:1 char:27 + Get-Service | Where-Object <<<< ($_.status -eq "running") + CategoryInfo : InvalidArgument: (:) [Where-Object], ParameterBindingException + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.WhereObjectCommand

  Read the article

• PC don't start the and no beeps from BIOS on power on

  - by doug

  Hi there A friend just brought me hi's PC because it doesn't start. I have no bios beeps, no screen activation. The monitor stays blank and nothing is on the display. Does anyone knows how can we fix this? Any ideas? Thank you!

  Read the article

• Saving 16:9 video in Movie Maker without black border

  - by Tschareck

  I'm editing my video in Windows Live Movie Maker from Live Essentials 2011. My source video is from camera and is .mp4 format with size of 1280 x 720. After editing in Movie Maker, I save the movie. And no matter what option I chose, I always end up with .wmv file, that is either 4:3 image with black stripes above and below the video, or 16:9 with black frame all around the image. What settings should I use, to be able to export or save the video in 1280 x 720 without any black border?

  Read the article

• solaris + EMC + power-path

  - by yael

  please advice - when I run powercf command on my Solaris machine , which changes this command do on the EMC storage , or on Solaris file system ? from maanual page: DESCRIPTION During system boot on Solaris hosts, the powercf utility configures PowerPath devices by scanning the HBAs for both single-ported and multiported storage system logical dev- ices. (A multiported logical device shows up on two or more HBAs with the same storage system subsystem/device identity. The identity comes from the serial number for the logical device.) For each storage system logical device found in the scan of the HBAs, powercf creates a corresponding emcpower device entry in the emcp.conf file, and it saves a primary path and an alternate primary path to that device.

  Read the article

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• BSOD after PC has been running for a while

  - by user1389999

  I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

• Windows 7 reboot and freezing, possible power problems?

  - by mikelbring

  My Gateway LX Series desktop is about 6-8 months old. When I bought it, it had Windows Vista. I then put the RC version of Windows 7 on it. About 3 months after I bought it, it would randomly start to reboot, actually just shut off. I monitored the temperature levels and they seemed normal. So I installed a fresh Windows 7 Ultimate OEM 64bit. It actually got worse and would reboot more frequently. I then contacted Gateway and they said my machine was built for Windows Vista (made me chuckle), and told me to update my BIOS. So I did, and it was fixed for a good couple months. Recently, it started to do it again. Now I noticed early on it was doing it most often, if not every time when I was either watching a flash video or playing a flash game. So I decided to download the drivers again and I also downloaded my motherboard drivers. Seemed to be okay. A week later it started doing it again. And now it's doing it even more frequently. Sometimes I would turn it on, login into Windows and *BAM!* it would shut off. Now I am at the point where I can hardly get it to turn on. It would freeze at the point where it says "Starting Windows", with the Windows logo. Sometimes it would say "Checking disk for consistency" or whatever and freeze there (not shut off, just freeze). I even got the prompt to launch startup repair. But that also freezes when it says starting Windows. It does not really freeze, just never loads up. I am kind of lost as to what's going on. I have a few ideas but nothing I want to pursue (graphics card? hard drive?). Another thing I did try was to boot into a live disk of Ubuntu and try to launch every program I could and get on the internet but I never got it to reboot. So it sounds like to me it's a Windows thing, but I have no idea. I am just stuck and would like to see if any one has any ideas or could lead me in the right direction.

  Read the article

• IOS not saving evaluate rule in access-list

  - by DeeJay1

  Hi. I have a basic firewall set up on an pretty od IOS in form of IPv6 access list exterior-in6 evaluate exterior-reflect sequence 1 permit ipv6 any host [my external address] sequence 10 permit tcp any host [my internal address] eq 22 sequence 11 permit icmp any any sequence 800 permit udp any any range 6881 6889 sequence 900 permit tcp any any range 6881 6889 sequence 901 deny ipv6 any any sequence 1000 IPv6 access list exterior-out6 permit ipv6 [my internal subnet] any reflect exterior-reflect sequence 10 Unfortunately the evaluate exterior-reflect sequence 1 line seems to get lost after each reboot, leaving my internal network without access. Any ideas?

  Read the article

• PC don't start the and no beebs from BIOS on power on

  - by doug

  Hi there A friend just brought me hi's PC because it doesn't start. I have no bios beeps, no screen activation. The monitor stays blank and nothing is on the display. Does anyone knows how can we fix this? Any ideas? Thank you!

  Read the article

• Computer won't stay powered up

  - by Android

  I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night.

  Read the article

• PDF form (not) saving

  - by gregseth

  I've created a form in a PDF with Adobe Acrobat Pro. When empy, I want to use it as a template which the user opens, fills in, and saves as a copy to preserve the blank state of the template. Here's the trick : I found both ways to make the document read only - the user can't save the form value, only print them make the document writeable, but in this case the document acting as a template can be modified too. Any ideas? Thanks.

  Read the article

• Saving not cached offline images in Firefox

  - by Wroblewski

  I want to save the images from a page in Firefox that have been open for a couple of days. The problem is that neither the page nor the images are available anymore online. The images where dynamically generated and not cached. The only way I can think of is by making a screenshot and then cutting out each invidual image. Isn't there a better way of getting the data from the browsers memory?

  Read the article

• Windows XP takes over 5 minutes "saving settings" on logout or shutdown

  - by esalaka

  Basically the comp in question is taking ages to log out - but only from the main account. I tried creating another account on the system and it only took seconds to log out. However, there seems to be no specific reason for this. Could it be that the registry is fragmented or something? How would I test what the problem is?

  Read the article

• Forcing Windows to be 'awake' during certain hours?

  - by Mun

  I'm running Windows 7 and have the power options currently set up to put the machine to sleep after 2 hours of inactivity. Is there any way to force the machine not to sleep between certain hours, or to automatically wake up? I'm assuming this can't be done directly from within the Windows power settings, but is there a third party utility (preferably free) that could take care of this? I've got backups scheduled every morning at 3-4am, and these don't run if the machine is suspended, so I just need to make sure that the everything is powered up during this time.

  Read the article

• where can i get cables for the canon Mx310

  - by Tarrasch

  Hey there, a friend of mine gave me a printer/scanner because he could not print with it anymore. the point is this thing has been lying in the cellar for quite some time now and the cables are missing. that is the power cable for my power plug ( there are foreign ones included) and more importantly the connection to the computer. I have googled around for a bit and tried to get to a hotline,but my problem is : Where can i get those cables from? Can anyne help me get a clue where to find those, where to ask for something like this? cheers

  Read the article

• Why won't my computer turn off?

  - by kinglime

  I have recently replaced my old Corsair TX650M PSU with a new CoolerMaster Silent Pro Gold 800w PSU. With the old PSU when I turned off my computer from windows it would shut down and everything would turn off. The lights would turn off and the fans would stop turning. With my new power supply when I shut down windows It shows the usual shutting down dialog then my two monitors say "no signal" and turn off. The weird part however is that the lights stay on and the fans continue spinning forever until I manually hold the power button in for 4 seconds then finally everything shuts off. How can I emulate the previous behavior?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >