Search Results

Search found 4699 results on 188 pages for 'ram'.

Page 37/188 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • What happens to remounted data/directories

    - by cauon
    According to suggestions in this post I am trying to improve my system to run better with a Solid State Drive. But regarding to RAMdisks and /etc/fstab usage I have some understanding problems coming up. So let's say I add the following lines to /etc/fstab tmpfs /tmp tmpfs defaults,noatime,nodiratime,mode=1777 0 0 tmpfs /var/spool tmpfs defaults,noatime,nodiratime,mode=1777 0 0 tmpfs /var/tmp tmpfs defaults,noatime,nodiratime,mode=1777 0 0 tmpfs /var/log tmpfs defaults,noatime,nodiratime,mode=0755 0 0 I know that on startup these locations should now get mounted into the RAM (hopefully). But what happens to the physical space that was mounted on those places before? Is it gone? Will it be back when I edit my /etc/fstab back to the Version without tmpfs? Will the space still be allocated on my SSD in a way that I can't use it for any other data? Sometimes it is suggested to add the following line, too: none /var/cache aufs dirs=/tmp:/var/cache=ro 0 0 What does this actually do? I noticed that /var/cache takes almost 1GB of space on my harddisk. So should i clear the directory before activating this line? (this is related to the former question) This causes me some confusions and I hope you can give me some clarifications. UPDATE I've downloaded a image with 600MB in size into /tmp that is mounted with the tmpfs settings above. Now I wanted to compare the RAM usage before and after the download. I expect the RAM usage to be increased by 600MB after the download. But the System Monitoring Tool showed me no changes at all. How can this be? Does tmpfs work other than I actually expect it to?

    Read the article

  • Setting up Cluster Configuration using an existing web server as a Primary Node?

    - by RapidWebs
    Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

    Read the article

  • Ubuntu 12.04 Faster boot, Hibernate & other questions

    - by Samarth Shukla
    I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

    Read the article

  • Apache DVB http video Streaming bandwidth or priority problem

    - by igino manfre'
    I'm streaming few precompressed DVB videos from cloud. The streams are generated from VLC on "impossible" ports (such as 64085, 64086 etc) reverse proxed by Apache on port 80 and 8080. All the generated streams are listed in "http://95.110.164.61/indexv.html". From an ADSL connection with enough downlink bandwidth, recalling the stream generated by VLC (such as "http://95.110.164.61:64087/mpg2_6.4") it flows fluently. Recalling the same stream proxed by Apache ("http://95.110.164.61/mpg2_6.4") the stream stops and goes. The only situation in which the Apache proxed streams flow regularly is from a site connected through 64 Mbps warranted bandwith with RTT to the server less than 10 mseconds. Please note that streams below 2 Mbps are fluently proxed. The system is a single core xeon with windows 2008 R2 on 4 GB of RAM with 1 Gbps of network bandwidth. The drain of computational and bandwidth resources is negligeable, the RAM usage always lower than 50%. On the system I run many VLC streamers. Any of them drains a variable amount of RAM (from about 25 to 70 MB). On the contrary the couple of httpd.exe processes drain no more than 7 MB. Using Wireshark (on the server) I see that VLC directy send to the client much more packets than Apache, and the stream is framgmented on many frames. I'm not a programmer, a newby of Apache. Can anyone please address me to a specific portion of the Apache's huge documentation? Thank you. igino

    Read the article

  • algorithm for Virtual Machine(VM) Consolidation in Cloud

    - by devansh dalal
    PROBLEM: We have N physical machines(PMs) each with ram Ri, cpu Ci and a set of currently scheduled VMs each with ram requirement ri and ci respectively Moving(Migrating) any VM from one PM to other has a cost associated which depends on its ram ri. A PM with no VMs is shut down to save power. Our target is to minimize the weighted sum of (N,migration cost) by migrating some VMs i.e. minimize the number of working PMs as well as not to degrade the service level due to excessive migrations. My Approach: Brute Force approach is choosing the minimum loaded PM and try to fit its VMs to other PMs by First Fit Decreasing algorithm or we can select the victim PMs and target PMs based on their loading level and shut down victims if possible by moving their VMs to targets. I tried this Greedy approach on the Data of Baadal(IIT-D cloud) but It isn't giving promising results. I have also tried to study the Ant colony optimization for dynamic VM consolidating but was unable to understand very much. I used the links. http://dumas.ccsd.cnrs.fr/docs/00/72/52/15/PDF/Esnault.pdf http://hal.archives-ouvertes.fr/docs/00/72/38/56/PDF/RR-8032.pdf Would anyone please explain the solution or suggest any new approach for better performance soon. Thanks in advance.

    Read the article

  • Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

    - by Estel
    A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

    Read the article

  • Minimum percentage of free physical memory that Linux require for optimal performance

    - by csoto
    Recently, we have been getting questions about this percentage of free physical memory that OS require for optimal performance, mainly applicable to physical compute nodes. Under normal conditions you may see that at the nodes without any application running the OS take (for example) between 24 and 25 GB of memory. The Linux system reports the free memory in a different way, and most of those 25gbs (of the example) are available for user processes. IE: Mem: 99191652k total, 23785732k used, 75405920k free, 173320k buffers The MOS Doc Id. 233753.1 - "Analyzing Data Provided by '/proc/meminfo'" - explains it (section 4 - "Final Remarks"): Free Memory and Used Memory Estimating the resource usage, especially the memory consumption of processes is by far more complicated than it looks like at a first glance. The philosophy is an unused resource is a wasted resource.The kernel therefore will use as much RAM as it can to cache information from your local and remote filesystems/disks. This builds up over time as reads and writes are done on the system trying to keep the data stored in RAM as relevant as possible to the processes that have been running on your system. If there is free RAM available, more caching will be performed and thus more memory 'consumed'. However this doesn't really count as resource usage, since this cached memory is available in case some other process needs it. The cache is reclaimed, not at the time of process exit (you might start up another process soon that needs the same data), but upon demand. That said, focusing more specifically on the percentage question, apart from this memory that OS takes, how much should be the minimum free memory that must be available every node so that they operate normally? The answer is: As a rule of thumb 80% memory utilization is a good threshold, anything bigger than that should be investigated and remedied.

    Read the article

  • Efficient algorithm for Virtual Machine(VM) Consolidation in Cloud

    - by devansh dalal
    PROBLEM: We have N physical machines(PMs) each with ram Ri, cpu Ci and a set of currently scheduled VMs each with ram requirement ri and ci respectively Moving(Migrating) any VM from one PM to other has a cost associated which depends on its ram ri. A PM with no VMs is shut down to save power. Our target is to minimize the weighted sum of (N,migration cost) by migrating some VMs i.e. minimize the number of working PMs as well as not to degrade the service level due to excessive migrations. My Approach: Brute Force approach is choosing the minimum loaded PM and try to fit its VMs to other PMs by First Fit Decreasing algorithm or we can select the victim PMs and target PMs based on their loading level and shut down victims if possible by moving their VMs to targets. I tried this Greedy approach on the Data of Baadal(IIT-D cloud) but It isn't giving promising results. I have also tried to study the Ant colony optimization for dynamic VM consolidating but was unable to understand very much. I used the links. http://dumas.ccsd.cnrs.fr/docs/00/72/52/15/PDF/Esnault.pdf http://hal.archives-ouvertes.fr/docs/00/72/38/56/PDF/RR-8032.pdf Would anyone please clarify the solution or suggest any new approach/resources for better performance. I am basically searching for the algorithms not the physical optimizations and I also know that many commercial organizations have provided these solution but I just wanted to know more the underlying algorithms. Thanks in advance.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Differences between KVR16N11H/8 and KVR16N11/8 memory except for height?

    - by rzetterberg
    I accidentally ordered KVR16N11/8 instead of KVR16N11H/8 and I'm wondering if I'm going to have compability issues with my Intel DP67DE motherboard. When searching for compatible RAM on Kingstons site for that motherboard the KVR16N11H/8 RAM was one of the compatible ones. The KVR16N11/8 did not show up as compatible for that motherboard. The only difference I can see is that they have different physical height, or am I missing something?

    Read the article

  • Vista install works on one computer, but bluescreens another (on which Vista is known to work)

    - by Ken
    I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

    Read the article

  • Any reason not to disable Windows kernel paging?

    - by Nathaniel
    So I'm planning on eventually going to 2 GB (mobo max) RAM from 1 GB, and I want to disable kernel paging once I do, because I've heard it can give a performance boost (and that I believe). Any reason not to do it or any general thoughts about it? Edit: for clarification, this is not disabling general RAM paging. This is disabling having kernel memory paged (or at least parts of it, as Charlls noted).

    Read the article

  • How to make Windows 7 machine allocate a lot of hard disk cache?

    - by Jian Lin
    I am recording some game play capture (recording playing of PS3 or Wii) using a PC with Windows 7 and Hauppauge 1212 HD Recorder, and I have 4GB of RAM... is there a way to increase the size of Windows 7's hard disk cache size so that writing to the hard drive can be super fast? Since there is at least 1.5GB of RAM not being used, something like allocating 1GB just as hard disk cache, is it possible?

    Read the article

  • Will Windows 7 work at all on my old toshiba [closed]

    - by andrew
    Windows 7 requires the following specifications: 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit) 16 GB available hard disk space (32-bit) or 20 GB (64-bit) DirectX 9 graphics device with WDDM 1.0 or higher driver Will it work at all on my old toshiba Satellite A100 PSAA8C-SK400E Intel® Core™ Solo processor T1350 (1.86GHz, 533MHz FSB, L1 Cache 32KB/32KB, L2 Cache 2MB) Standard Memory: 2x512 MB DDR2 Intel® Graphics Media Accelerator 950 with 8MB-128MB. The main problem I can see is that the graphics is not up to it.

    Read the article

  • Can we decrease page swapping?

    - by Benjamin
    My system has a 5GB RAM. And my paging file size is 2GB Even though I have many RAM, page-swapping still occurs. But I don't want to swapping. If I resize the paging file size(ex 200MB?), Doesn't Windows System do any swapping? Are there side-effects?

    Read the article

  • Can we decrease page swapping?

    - by Benjamin
    My system has a 5GB RAM. And my paging file size is 2GB Even though I have many RAM, page-swapping still occurs. But I don't want to that. I know how adjust the paging file size. If I resize the paging file size(ex 200MB?), Doesn't Windows System do any swapping? Are there side-effects?

    Read the article

  • Any reason not to disable Windows kernel paging?

    - by Nathaniel
    So I'm planning on eventually going to 2 GB (mobo max) RAM from 1 GB, and I want to disable kernel paging once I do, because I've heard it can give a performance boost (and that I believe). Any reason not to do it or any general thoughts about it? Edit: for clarification, this is not disabling general RAM paging. This is disabling having kernel memory paged (or at least parts of it, as Charlls noted).

    Read the article

  • Weird screeching sounds coming from computer

    - by EGHDK
    My computer makes a high pitched whine noise that initially was coming from my SSD, but now I recently installed more ram into my laptop and it makes a new sounds. I don't want my ram or SSD to die on me. Are there any tests to test both of these? Again, these are really high pitched whine(y) sounds that you wouldn't hear normally, but when I'm home alone and it's silent, the noise sounds as loud as can be.

    Read the article

  • Easy Install Resets Hardware Settings

    - by bob5972
    I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

    Read the article

  • Easy Install Resets Hardware Settings

    - by bob5972
    I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

    Read the article

  • Is there a difference between the actual chip intended for Dual Channel vs Triple Channel

    - by JimDel
    Is there a difference between the actual chips intended for Dual Channel vs Triple Channel. I bought a set of triple channel memory but I'm only using 2 of the 3 chips. I'm getting the error "Display driver NVIDIA Windows Kernel Mode Driver, Version 197.45 stopped responding and has successfully recovered" There seems to be a TON of discussion on the web about this and some say it might be RAM related. This is the ram I'm using. Thanks

    Read the article

  • Increase process memory cap.

    - by Janis Veinbergs
    Doing copy/paste in Visual Studio 2010 RTM on Windows 7, 3GB ram machine, I was unable to copy text because of an error: Task Manager shows that devenv.exe is using a little more than 500MB. However I still have almost 1GB of free RAM available. Is that somekind of memory cap? If so, is there a way to increase it? It may be a bug, but maybe there is a workaround?

    Read the article

  • SQL Server 2012 Read-Only Replica physical requirements

    - by Ddono25
    We are going to be setting up two replicas of our DataMart and related databases, and our plan includes using Hyper-V VM's to handle the load. When creating the VM's, we cannot find specific requirements or recommendations for RAM/CPU power for read-only replicas. Our current Primary DataMart setup has 64GB RAM and Two Quad-Core procs, which so far has been adequate for our usage. What should be the server setup for replicas and SQL Server to adequately support the read-only usage?

    Read the article

  • How can Rackspace beat DigitalOcean's Pricepoint? [on hold]

    - by Matt Jensen
    I have recently discovered Digital Ocean and I have found it to be a relatively nice experience for small staging servers, and the thought occurred to me, why am I paying $267~ for a server on Rackspace (40GB RAM, 160 GB Drive, 2 vCPUs, 400 Mb/s) when Digital Ocean offers a server for $40 (40 GB RAM, 60GB Drive [storage is not a concern of mine], 2 vCPUs, ?Mb/s)? Does Rackspace offer some kind of obvious advantages in Transfer speed/bandwidth? My applications are small startups that for the immediate future will only have about 200-300 concurrent users at once.

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >